mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-09 04:21:49 +08:00
492d29ea1c
This patch splits the TRY_CATCH macro into three, so that we go from this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ERROR) { } if (ex.reason < 0) { } ~~~ to this: ~~~ TRY { } CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH ~~~ Thus, we'll be getting rid of the local volatile exception object, and declaring the caught exception in the catch block. This allows reimplementing TRY/CATCH in terms of C++ exceptions when building in C++ mode, while still allowing to build GDB in C mode (using setjmp/longjmp), as a transition step. TBC, after this patch, is it _not_ valid to have code between the TRY and the CATCH blocks, like: TRY { } // some code here. CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH Just like it isn't valid to do that with C++'s native try/catch. By switching to creating the exception object inside the CATCH block scope, we can get rid of all the explicitly allocated volatile exception objects all over the tree, and map the CATCH block more directly to C++'s catch blocks. The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was done with a script, rerun from scratch at every rebase, no manual editing involved. After the mechanical conversion, a few places needed manual intervention, to fix preexisting cases where we were using the exception object outside of the TRY_CATCH block, and cases where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH after this patch]. The result was folded into this patch so that GDB still builds at each incremental step. END_CATCH is necessary for two reasons: First, because we name the exception object in the CATCH block, which requires creating a scope, which in turn must be closed somewhere. Declaring the exception variable in the initializer field of a for block, like: #define CATCH(EXCEPTION, mask) \ for (struct gdb_exception EXCEPTION; \ exceptions_state_mc_catch (&EXCEPTION, MASK); \ EXCEPTION = exception_none) would avoid needing END_CATCH, but alas, in C mode, we build with C90, which doesn't allow mixed declarations and code. Second, because when TRY/CATCH are wired to real C++ try/catch, as long as we need to handle cleanup chains, even if there's no CATCH block that wants to catch the exception, we need for stop at every frame in the unwind chain and run cleanups, then rethrow. That will be done in END_CATCH. After we require C++, we'll still need TRY/CATCH/END_CATCH until cleanups are completely phased out -- TRY/CATCH in C++ mode will save/restore the current cleanup chain, like in C mode, and END_CATCH catches otherwise uncaugh exceptions, runs cleanups and rethrows, so that C++ cleanups and exceptions can coexist. IMO, this still makes the TRY/CATCH code look a bit more like a newcomer would expect, so IMO worth it even if we weren't considering C++. gdb/ChangeLog. 2015-03-07 Pedro Alves <palves@redhat.com> * common/common-exceptions.c (struct catcher) <exception>: No longer a pointer to volatile exception. Now an exception value. <mask>: Delete field. (exceptions_state_mc_init): Remove all parameters. Adjust. (exceptions_state_mc): No longer pop the catcher here. (exceptions_state_mc_catch): New function. (throw_exception): Adjust. * common/common-exceptions.h (exceptions_state_mc_init): Remove all parameters. (exceptions_state_mc_catch): Declare. (TRY_CATCH): Rename to ... (TRY): ... this. Remove EXCEPTION and MASK parameters. (CATCH, END_CATCH): New. All callers adjusted. gdb/gdbserver/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH instead.
2480 lines
74 KiB
C
2480 lines
74 KiB
C
/* Frame unwinder for frames with DWARF Call Frame Information.
|
||
|
||
Copyright (C) 2003-2015 Free Software Foundation, Inc.
|
||
|
||
Contributed by Mark Kettenis.
|
||
|
||
This file is part of GDB.
|
||
|
||
This program is free software; you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation; either version 3 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
||
|
||
#include "defs.h"
|
||
#include "dwarf2expr.h"
|
||
#include "dwarf2.h"
|
||
#include "frame.h"
|
||
#include "frame-base.h"
|
||
#include "frame-unwind.h"
|
||
#include "gdbcore.h"
|
||
#include "gdbtypes.h"
|
||
#include "symtab.h"
|
||
#include "objfiles.h"
|
||
#include "regcache.h"
|
||
#include "value.h"
|
||
#include "record.h"
|
||
|
||
#include "complaints.h"
|
||
#include "dwarf2-frame.h"
|
||
#include "ax.h"
|
||
#include "dwarf2loc.h"
|
||
#include "dwarf2-frame-tailcall.h"
|
||
|
||
struct comp_unit;
|
||
|
||
/* Call Frame Information (CFI). */
|
||
|
||
/* Common Information Entry (CIE). */
|
||
|
||
struct dwarf2_cie
|
||
{
|
||
/* Computation Unit for this CIE. */
|
||
struct comp_unit *unit;
|
||
|
||
/* Offset into the .debug_frame section where this CIE was found.
|
||
Used to identify this CIE. */
|
||
ULONGEST cie_pointer;
|
||
|
||
/* Constant that is factored out of all advance location
|
||
instructions. */
|
||
ULONGEST code_alignment_factor;
|
||
|
||
/* Constants that is factored out of all offset instructions. */
|
||
LONGEST data_alignment_factor;
|
||
|
||
/* Return address column. */
|
||
ULONGEST return_address_register;
|
||
|
||
/* Instruction sequence to initialize a register set. */
|
||
const gdb_byte *initial_instructions;
|
||
const gdb_byte *end;
|
||
|
||
/* Saved augmentation, in case it's needed later. */
|
||
char *augmentation;
|
||
|
||
/* Encoding of addresses. */
|
||
gdb_byte encoding;
|
||
|
||
/* Target address size in bytes. */
|
||
int addr_size;
|
||
|
||
/* Target pointer size in bytes. */
|
||
int ptr_size;
|
||
|
||
/* True if a 'z' augmentation existed. */
|
||
unsigned char saw_z_augmentation;
|
||
|
||
/* True if an 'S' augmentation existed. */
|
||
unsigned char signal_frame;
|
||
|
||
/* The version recorded in the CIE. */
|
||
unsigned char version;
|
||
|
||
/* The segment size. */
|
||
unsigned char segment_size;
|
||
};
|
||
|
||
struct dwarf2_cie_table
|
||
{
|
||
int num_entries;
|
||
struct dwarf2_cie **entries;
|
||
};
|
||
|
||
/* Frame Description Entry (FDE). */
|
||
|
||
struct dwarf2_fde
|
||
{
|
||
/* CIE for this FDE. */
|
||
struct dwarf2_cie *cie;
|
||
|
||
/* First location associated with this FDE. */
|
||
CORE_ADDR initial_location;
|
||
|
||
/* Number of bytes of program instructions described by this FDE. */
|
||
CORE_ADDR address_range;
|
||
|
||
/* Instruction sequence. */
|
||
const gdb_byte *instructions;
|
||
const gdb_byte *end;
|
||
|
||
/* True if this FDE is read from a .eh_frame instead of a .debug_frame
|
||
section. */
|
||
unsigned char eh_frame_p;
|
||
};
|
||
|
||
struct dwarf2_fde_table
|
||
{
|
||
int num_entries;
|
||
struct dwarf2_fde **entries;
|
||
};
|
||
|
||
/* A minimal decoding of DWARF2 compilation units. We only decode
|
||
what's needed to get to the call frame information. */
|
||
|
||
struct comp_unit
|
||
{
|
||
/* Keep the bfd convenient. */
|
||
bfd *abfd;
|
||
|
||
struct objfile *objfile;
|
||
|
||
/* Pointer to the .debug_frame section loaded into memory. */
|
||
const gdb_byte *dwarf_frame_buffer;
|
||
|
||
/* Length of the loaded .debug_frame section. */
|
||
bfd_size_type dwarf_frame_size;
|
||
|
||
/* Pointer to the .debug_frame section. */
|
||
asection *dwarf_frame_section;
|
||
|
||
/* Base for DW_EH_PE_datarel encodings. */
|
||
bfd_vma dbase;
|
||
|
||
/* Base for DW_EH_PE_textrel encodings. */
|
||
bfd_vma tbase;
|
||
};
|
||
|
||
static struct dwarf2_fde *dwarf2_frame_find_fde (CORE_ADDR *pc,
|
||
CORE_ADDR *out_offset);
|
||
|
||
static int dwarf2_frame_adjust_regnum (struct gdbarch *gdbarch, int regnum,
|
||
int eh_frame_p);
|
||
|
||
static CORE_ADDR read_encoded_value (struct comp_unit *unit, gdb_byte encoding,
|
||
int ptr_len, const gdb_byte *buf,
|
||
unsigned int *bytes_read_ptr,
|
||
CORE_ADDR func_base);
|
||
|
||
|
||
enum cfa_how_kind
|
||
{
|
||
CFA_UNSET,
|
||
CFA_REG_OFFSET,
|
||
CFA_EXP
|
||
};
|
||
|
||
struct dwarf2_frame_state_reg_info
|
||
{
|
||
struct dwarf2_frame_state_reg *reg;
|
||
int num_regs;
|
||
|
||
LONGEST cfa_offset;
|
||
ULONGEST cfa_reg;
|
||
enum cfa_how_kind cfa_how;
|
||
const gdb_byte *cfa_exp;
|
||
|
||
/* Used to implement DW_CFA_remember_state. */
|
||
struct dwarf2_frame_state_reg_info *prev;
|
||
};
|
||
|
||
/* Structure describing a frame state. */
|
||
|
||
struct dwarf2_frame_state
|
||
{
|
||
/* Each register save state can be described in terms of a CFA slot,
|
||
another register, or a location expression. */
|
||
struct dwarf2_frame_state_reg_info regs;
|
||
|
||
/* The PC described by the current frame state. */
|
||
CORE_ADDR pc;
|
||
|
||
/* Initial register set from the CIE.
|
||
Used to implement DW_CFA_restore. */
|
||
struct dwarf2_frame_state_reg_info initial;
|
||
|
||
/* The information we care about from the CIE. */
|
||
LONGEST data_align;
|
||
ULONGEST code_align;
|
||
ULONGEST retaddr_column;
|
||
|
||
/* Flags for known producer quirks. */
|
||
|
||
/* The ARM compilers, in DWARF2 mode, assume that DW_CFA_def_cfa
|
||
and DW_CFA_def_cfa_offset takes a factored offset. */
|
||
int armcc_cfa_offsets_sf;
|
||
|
||
/* The ARM compilers, in DWARF2 or DWARF3 mode, may assume that
|
||
the CFA is defined as REG - OFFSET rather than REG + OFFSET. */
|
||
int armcc_cfa_offsets_reversed;
|
||
};
|
||
|
||
/* Store the length the expression for the CFA in the `cfa_reg' field,
|
||
which is unused in that case. */
|
||
#define cfa_exp_len cfa_reg
|
||
|
||
/* Assert that the register set RS is large enough to store gdbarch_num_regs
|
||
columns. If necessary, enlarge the register set. */
|
||
|
||
static void
|
||
dwarf2_frame_state_alloc_regs (struct dwarf2_frame_state_reg_info *rs,
|
||
int num_regs)
|
||
{
|
||
size_t size = sizeof (struct dwarf2_frame_state_reg);
|
||
|
||
if (num_regs <= rs->num_regs)
|
||
return;
|
||
|
||
rs->reg = (struct dwarf2_frame_state_reg *)
|
||
xrealloc (rs->reg, num_regs * size);
|
||
|
||
/* Initialize newly allocated registers. */
|
||
memset (rs->reg + rs->num_regs, 0, (num_regs - rs->num_regs) * size);
|
||
rs->num_regs = num_regs;
|
||
}
|
||
|
||
/* Copy the register columns in register set RS into newly allocated
|
||
memory and return a pointer to this newly created copy. */
|
||
|
||
static struct dwarf2_frame_state_reg *
|
||
dwarf2_frame_state_copy_regs (struct dwarf2_frame_state_reg_info *rs)
|
||
{
|
||
size_t size = rs->num_regs * sizeof (struct dwarf2_frame_state_reg);
|
||
struct dwarf2_frame_state_reg *reg;
|
||
|
||
reg = (struct dwarf2_frame_state_reg *) xmalloc (size);
|
||
memcpy (reg, rs->reg, size);
|
||
|
||
return reg;
|
||
}
|
||
|
||
/* Release the memory allocated to register set RS. */
|
||
|
||
static void
|
||
dwarf2_frame_state_free_regs (struct dwarf2_frame_state_reg_info *rs)
|
||
{
|
||
if (rs)
|
||
{
|
||
dwarf2_frame_state_free_regs (rs->prev);
|
||
|
||
xfree (rs->reg);
|
||
xfree (rs);
|
||
}
|
||
}
|
||
|
||
/* Release the memory allocated to the frame state FS. */
|
||
|
||
static void
|
||
dwarf2_frame_state_free (void *p)
|
||
{
|
||
struct dwarf2_frame_state *fs = p;
|
||
|
||
dwarf2_frame_state_free_regs (fs->initial.prev);
|
||
dwarf2_frame_state_free_regs (fs->regs.prev);
|
||
xfree (fs->initial.reg);
|
||
xfree (fs->regs.reg);
|
||
xfree (fs);
|
||
}
|
||
|
||
|
||
/* Helper functions for execute_stack_op. */
|
||
|
||
static CORE_ADDR
|
||
read_addr_from_reg (void *baton, int reg)
|
||
{
|
||
struct frame_info *this_frame = (struct frame_info *) baton;
|
||
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
||
int regnum = gdbarch_dwarf2_reg_to_regnum (gdbarch, reg);
|
||
|
||
return address_from_register (regnum, this_frame);
|
||
}
|
||
|
||
/* Implement struct dwarf_expr_context_funcs' "get_reg_value" callback. */
|
||
|
||
static struct value *
|
||
get_reg_value (void *baton, struct type *type, int reg)
|
||
{
|
||
struct frame_info *this_frame = (struct frame_info *) baton;
|
||
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
||
int regnum = gdbarch_dwarf2_reg_to_regnum (gdbarch, reg);
|
||
|
||
return value_from_register (type, regnum, this_frame);
|
||
}
|
||
|
||
static void
|
||
read_mem (void *baton, gdb_byte *buf, CORE_ADDR addr, size_t len)
|
||
{
|
||
read_memory (addr, buf, len);
|
||
}
|
||
|
||
/* Execute the required actions for both the DW_CFA_restore and
|
||
DW_CFA_restore_extended instructions. */
|
||
static void
|
||
dwarf2_restore_rule (struct gdbarch *gdbarch, ULONGEST reg_num,
|
||
struct dwarf2_frame_state *fs, int eh_frame_p)
|
||
{
|
||
ULONGEST reg;
|
||
|
||
gdb_assert (fs->initial.reg);
|
||
reg = dwarf2_frame_adjust_regnum (gdbarch, reg_num, eh_frame_p);
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
|
||
/* Check if this register was explicitly initialized in the
|
||
CIE initial instructions. If not, default the rule to
|
||
UNSPECIFIED. */
|
||
if (reg < fs->initial.num_regs)
|
||
fs->regs.reg[reg] = fs->initial.reg[reg];
|
||
else
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_UNSPECIFIED;
|
||
|
||
if (fs->regs.reg[reg].how == DWARF2_FRAME_REG_UNSPECIFIED)
|
||
complaint (&symfile_complaints, _("\
|
||
incomplete CFI data; DW_CFA_restore unspecified\n\
|
||
register %s (#%d) at %s"),
|
||
gdbarch_register_name
|
||
(gdbarch, gdbarch_dwarf2_reg_to_regnum (gdbarch, reg)),
|
||
gdbarch_dwarf2_reg_to_regnum (gdbarch, reg),
|
||
paddress (gdbarch, fs->pc));
|
||
}
|
||
|
||
/* Virtual method table for execute_stack_op below. */
|
||
|
||
static const struct dwarf_expr_context_funcs dwarf2_frame_ctx_funcs =
|
||
{
|
||
read_addr_from_reg,
|
||
get_reg_value,
|
||
read_mem,
|
||
ctx_no_get_frame_base,
|
||
ctx_no_get_frame_cfa,
|
||
ctx_no_get_frame_pc,
|
||
ctx_no_get_tls_address,
|
||
ctx_no_dwarf_call,
|
||
ctx_no_get_base_type,
|
||
ctx_no_push_dwarf_reg_entry_value,
|
||
ctx_no_get_addr_index
|
||
};
|
||
|
||
static CORE_ADDR
|
||
execute_stack_op (const gdb_byte *exp, ULONGEST len, int addr_size,
|
||
CORE_ADDR offset, struct frame_info *this_frame,
|
||
CORE_ADDR initial, int initial_in_stack_memory)
|
||
{
|
||
struct dwarf_expr_context *ctx;
|
||
CORE_ADDR result;
|
||
struct cleanup *old_chain;
|
||
|
||
ctx = new_dwarf_expr_context ();
|
||
old_chain = make_cleanup_free_dwarf_expr_context (ctx);
|
||
make_cleanup_value_free_to_mark (value_mark ());
|
||
|
||
ctx->gdbarch = get_frame_arch (this_frame);
|
||
ctx->addr_size = addr_size;
|
||
ctx->ref_addr_size = -1;
|
||
ctx->offset = offset;
|
||
ctx->baton = this_frame;
|
||
ctx->funcs = &dwarf2_frame_ctx_funcs;
|
||
|
||
dwarf_expr_push_address (ctx, initial, initial_in_stack_memory);
|
||
dwarf_expr_eval (ctx, exp, len);
|
||
|
||
if (ctx->location == DWARF_VALUE_MEMORY)
|
||
result = dwarf_expr_fetch_address (ctx, 0);
|
||
else if (ctx->location == DWARF_VALUE_REGISTER)
|
||
result = read_addr_from_reg (this_frame,
|
||
value_as_long (dwarf_expr_fetch (ctx, 0)));
|
||
else
|
||
{
|
||
/* This is actually invalid DWARF, but if we ever do run across
|
||
it somehow, we might as well support it. So, instead, report
|
||
it as unimplemented. */
|
||
error (_("\
|
||
Not implemented: computing unwound register using explicit value operator"));
|
||
}
|
||
|
||
do_cleanups (old_chain);
|
||
|
||
return result;
|
||
}
|
||
|
||
|
||
/* Execute FDE program from INSN_PTR possibly up to INSN_END or up to inferior
|
||
PC. Modify FS state accordingly. Return current INSN_PTR where the
|
||
execution has stopped, one can resume it on the next call. */
|
||
|
||
static const gdb_byte *
|
||
execute_cfa_program (struct dwarf2_fde *fde, const gdb_byte *insn_ptr,
|
||
const gdb_byte *insn_end, struct gdbarch *gdbarch,
|
||
CORE_ADDR pc, struct dwarf2_frame_state *fs)
|
||
{
|
||
int eh_frame_p = fde->eh_frame_p;
|
||
unsigned int bytes_read;
|
||
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
||
|
||
while (insn_ptr < insn_end && fs->pc <= pc)
|
||
{
|
||
gdb_byte insn = *insn_ptr++;
|
||
uint64_t utmp, reg;
|
||
int64_t offset;
|
||
|
||
if ((insn & 0xc0) == DW_CFA_advance_loc)
|
||
fs->pc += (insn & 0x3f) * fs->code_align;
|
||
else if ((insn & 0xc0) == DW_CFA_offset)
|
||
{
|
||
reg = insn & 0x3f;
|
||
reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
offset = utmp * fs->data_align;
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
|
||
fs->regs.reg[reg].loc.offset = offset;
|
||
}
|
||
else if ((insn & 0xc0) == DW_CFA_restore)
|
||
{
|
||
reg = insn & 0x3f;
|
||
dwarf2_restore_rule (gdbarch, reg, fs, eh_frame_p);
|
||
}
|
||
else
|
||
{
|
||
switch (insn)
|
||
{
|
||
case DW_CFA_set_loc:
|
||
fs->pc = read_encoded_value (fde->cie->unit, fde->cie->encoding,
|
||
fde->cie->ptr_size, insn_ptr,
|
||
&bytes_read, fde->initial_location);
|
||
/* Apply the objfile offset for relocatable objects. */
|
||
fs->pc += ANOFFSET (fde->cie->unit->objfile->section_offsets,
|
||
SECT_OFF_TEXT (fde->cie->unit->objfile));
|
||
insn_ptr += bytes_read;
|
||
break;
|
||
|
||
case DW_CFA_advance_loc1:
|
||
utmp = extract_unsigned_integer (insn_ptr, 1, byte_order);
|
||
fs->pc += utmp * fs->code_align;
|
||
insn_ptr++;
|
||
break;
|
||
case DW_CFA_advance_loc2:
|
||
utmp = extract_unsigned_integer (insn_ptr, 2, byte_order);
|
||
fs->pc += utmp * fs->code_align;
|
||
insn_ptr += 2;
|
||
break;
|
||
case DW_CFA_advance_loc4:
|
||
utmp = extract_unsigned_integer (insn_ptr, 4, byte_order);
|
||
fs->pc += utmp * fs->code_align;
|
||
insn_ptr += 4;
|
||
break;
|
||
|
||
case DW_CFA_offset_extended:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
offset = utmp * fs->data_align;
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
|
||
fs->regs.reg[reg].loc.offset = offset;
|
||
break;
|
||
|
||
case DW_CFA_restore_extended:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
dwarf2_restore_rule (gdbarch, reg, fs, eh_frame_p);
|
||
break;
|
||
|
||
case DW_CFA_undefined:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_UNDEFINED;
|
||
break;
|
||
|
||
case DW_CFA_same_value:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAME_VALUE;
|
||
break;
|
||
|
||
case DW_CFA_register:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
utmp = dwarf2_frame_adjust_regnum (gdbarch, utmp, eh_frame_p);
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_REG;
|
||
fs->regs.reg[reg].loc.reg = utmp;
|
||
break;
|
||
|
||
case DW_CFA_remember_state:
|
||
{
|
||
struct dwarf2_frame_state_reg_info *new_rs;
|
||
|
||
new_rs = XNEW (struct dwarf2_frame_state_reg_info);
|
||
*new_rs = fs->regs;
|
||
fs->regs.reg = dwarf2_frame_state_copy_regs (&fs->regs);
|
||
fs->regs.prev = new_rs;
|
||
}
|
||
break;
|
||
|
||
case DW_CFA_restore_state:
|
||
{
|
||
struct dwarf2_frame_state_reg_info *old_rs = fs->regs.prev;
|
||
|
||
if (old_rs == NULL)
|
||
{
|
||
complaint (&symfile_complaints, _("\
|
||
bad CFI data; mismatched DW_CFA_restore_state at %s"),
|
||
paddress (gdbarch, fs->pc));
|
||
}
|
||
else
|
||
{
|
||
xfree (fs->regs.reg);
|
||
fs->regs = *old_rs;
|
||
xfree (old_rs);
|
||
}
|
||
}
|
||
break;
|
||
|
||
case DW_CFA_def_cfa:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
fs->regs.cfa_reg = reg;
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
|
||
if (fs->armcc_cfa_offsets_sf)
|
||
utmp *= fs->data_align;
|
||
|
||
fs->regs.cfa_offset = utmp;
|
||
fs->regs.cfa_how = CFA_REG_OFFSET;
|
||
break;
|
||
|
||
case DW_CFA_def_cfa_register:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
fs->regs.cfa_reg = dwarf2_frame_adjust_regnum (gdbarch, reg,
|
||
eh_frame_p);
|
||
fs->regs.cfa_how = CFA_REG_OFFSET;
|
||
break;
|
||
|
||
case DW_CFA_def_cfa_offset:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
|
||
if (fs->armcc_cfa_offsets_sf)
|
||
utmp *= fs->data_align;
|
||
|
||
fs->regs.cfa_offset = utmp;
|
||
/* cfa_how deliberately not set. */
|
||
break;
|
||
|
||
case DW_CFA_nop:
|
||
break;
|
||
|
||
case DW_CFA_def_cfa_expression:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
fs->regs.cfa_exp_len = utmp;
|
||
fs->regs.cfa_exp = insn_ptr;
|
||
fs->regs.cfa_how = CFA_EXP;
|
||
insn_ptr += fs->regs.cfa_exp_len;
|
||
break;
|
||
|
||
case DW_CFA_expression:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
fs->regs.reg[reg].loc.exp = insn_ptr;
|
||
fs->regs.reg[reg].exp_len = utmp;
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_EXP;
|
||
insn_ptr += utmp;
|
||
break;
|
||
|
||
case DW_CFA_offset_extended_sf:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
|
||
insn_ptr = safe_read_sleb128 (insn_ptr, insn_end, &offset);
|
||
offset *= fs->data_align;
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
|
||
fs->regs.reg[reg].loc.offset = offset;
|
||
break;
|
||
|
||
case DW_CFA_val_offset:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
offset = utmp * fs->data_align;
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_VAL_OFFSET;
|
||
fs->regs.reg[reg].loc.offset = offset;
|
||
break;
|
||
|
||
case DW_CFA_val_offset_sf:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
insn_ptr = safe_read_sleb128 (insn_ptr, insn_end, &offset);
|
||
offset *= fs->data_align;
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_VAL_OFFSET;
|
||
fs->regs.reg[reg].loc.offset = offset;
|
||
break;
|
||
|
||
case DW_CFA_val_expression:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
fs->regs.reg[reg].loc.exp = insn_ptr;
|
||
fs->regs.reg[reg].exp_len = utmp;
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_VAL_EXP;
|
||
insn_ptr += utmp;
|
||
break;
|
||
|
||
case DW_CFA_def_cfa_sf:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
fs->regs.cfa_reg = dwarf2_frame_adjust_regnum (gdbarch, reg,
|
||
eh_frame_p);
|
||
insn_ptr = safe_read_sleb128 (insn_ptr, insn_end, &offset);
|
||
fs->regs.cfa_offset = offset * fs->data_align;
|
||
fs->regs.cfa_how = CFA_REG_OFFSET;
|
||
break;
|
||
|
||
case DW_CFA_def_cfa_offset_sf:
|
||
insn_ptr = safe_read_sleb128 (insn_ptr, insn_end, &offset);
|
||
fs->regs.cfa_offset = offset * fs->data_align;
|
||
/* cfa_how deliberately not set. */
|
||
break;
|
||
|
||
case DW_CFA_GNU_window_save:
|
||
/* This is SPARC-specific code, and contains hard-coded
|
||
constants for the register numbering scheme used by
|
||
GCC. Rather than having a architecture-specific
|
||
operation that's only ever used by a single
|
||
architecture, we provide the implementation here.
|
||
Incidentally that's what GCC does too in its
|
||
unwinder. */
|
||
{
|
||
int size = register_size (gdbarch, 0);
|
||
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, 32);
|
||
for (reg = 8; reg < 16; reg++)
|
||
{
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_REG;
|
||
fs->regs.reg[reg].loc.reg = reg + 16;
|
||
}
|
||
for (reg = 16; reg < 32; reg++)
|
||
{
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
|
||
fs->regs.reg[reg].loc.offset = (reg - 16) * size;
|
||
}
|
||
}
|
||
break;
|
||
|
||
case DW_CFA_GNU_args_size:
|
||
/* Ignored. */
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
break;
|
||
|
||
case DW_CFA_GNU_negative_offset_extended:
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, ®);
|
||
reg = dwarf2_frame_adjust_regnum (gdbarch, reg, eh_frame_p);
|
||
insn_ptr = safe_read_uleb128 (insn_ptr, insn_end, &utmp);
|
||
offset = utmp * fs->data_align;
|
||
dwarf2_frame_state_alloc_regs (&fs->regs, reg + 1);
|
||
fs->regs.reg[reg].how = DWARF2_FRAME_REG_SAVED_OFFSET;
|
||
fs->regs.reg[reg].loc.offset = -offset;
|
||
break;
|
||
|
||
default:
|
||
internal_error (__FILE__, __LINE__,
|
||
_("Unknown CFI encountered."));
|
||
}
|
||
}
|
||
}
|
||
|
||
if (fs->initial.reg == NULL)
|
||
{
|
||
/* Don't allow remember/restore between CIE and FDE programs. */
|
||
dwarf2_frame_state_free_regs (fs->regs.prev);
|
||
fs->regs.prev = NULL;
|
||
}
|
||
|
||
return insn_ptr;
|
||
}
|
||
|
||
|
||
/* Architecture-specific operations. */
|
||
|
||
/* Per-architecture data key. */
|
||
static struct gdbarch_data *dwarf2_frame_data;
|
||
|
||
struct dwarf2_frame_ops
|
||
{
|
||
/* Pre-initialize the register state REG for register REGNUM. */
|
||
void (*init_reg) (struct gdbarch *, int, struct dwarf2_frame_state_reg *,
|
||
struct frame_info *);
|
||
|
||
/* Check whether the THIS_FRAME is a signal trampoline. */
|
||
int (*signal_frame_p) (struct gdbarch *, struct frame_info *);
|
||
|
||
/* Convert .eh_frame register number to DWARF register number, or
|
||
adjust .debug_frame register number. */
|
||
int (*adjust_regnum) (struct gdbarch *, int, int);
|
||
};
|
||
|
||
/* Default architecture-specific register state initialization
|
||
function. */
|
||
|
||
static void
|
||
dwarf2_frame_default_init_reg (struct gdbarch *gdbarch, int regnum,
|
||
struct dwarf2_frame_state_reg *reg,
|
||
struct frame_info *this_frame)
|
||
{
|
||
/* If we have a register that acts as a program counter, mark it as
|
||
a destination for the return address. If we have a register that
|
||
serves as the stack pointer, arrange for it to be filled with the
|
||
call frame address (CFA). The other registers are marked as
|
||
unspecified.
|
||
|
||
We copy the return address to the program counter, since many
|
||
parts in GDB assume that it is possible to get the return address
|
||
by unwinding the program counter register. However, on ISA's
|
||
with a dedicated return address register, the CFI usually only
|
||
contains information to unwind that return address register.
|
||
|
||
The reason we're treating the stack pointer special here is
|
||
because in many cases GCC doesn't emit CFI for the stack pointer
|
||
and implicitly assumes that it is equal to the CFA. This makes
|
||
some sense since the DWARF specification (version 3, draft 8,
|
||
p. 102) says that:
|
||
|
||
"Typically, the CFA is defined to be the value of the stack
|
||
pointer at the call site in the previous frame (which may be
|
||
different from its value on entry to the current frame)."
|
||
|
||
However, this isn't true for all platforms supported by GCC
|
||
(e.g. IBM S/390 and zSeries). Those architectures should provide
|
||
their own architecture-specific initialization function. */
|
||
|
||
if (regnum == gdbarch_pc_regnum (gdbarch))
|
||
reg->how = DWARF2_FRAME_REG_RA;
|
||
else if (regnum == gdbarch_sp_regnum (gdbarch))
|
||
reg->how = DWARF2_FRAME_REG_CFA;
|
||
}
|
||
|
||
/* Return a default for the architecture-specific operations. */
|
||
|
||
static void *
|
||
dwarf2_frame_init (struct obstack *obstack)
|
||
{
|
||
struct dwarf2_frame_ops *ops;
|
||
|
||
ops = OBSTACK_ZALLOC (obstack, struct dwarf2_frame_ops);
|
||
ops->init_reg = dwarf2_frame_default_init_reg;
|
||
return ops;
|
||
}
|
||
|
||
/* Set the architecture-specific register state initialization
|
||
function for GDBARCH to INIT_REG. */
|
||
|
||
void
|
||
dwarf2_frame_set_init_reg (struct gdbarch *gdbarch,
|
||
void (*init_reg) (struct gdbarch *, int,
|
||
struct dwarf2_frame_state_reg *,
|
||
struct frame_info *))
|
||
{
|
||
struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
|
||
|
||
ops->init_reg = init_reg;
|
||
}
|
||
|
||
/* Pre-initialize the register state REG for register REGNUM. */
|
||
|
||
static void
|
||
dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
|
||
struct dwarf2_frame_state_reg *reg,
|
||
struct frame_info *this_frame)
|
||
{
|
||
struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
|
||
|
||
ops->init_reg (gdbarch, regnum, reg, this_frame);
|
||
}
|
||
|
||
/* Set the architecture-specific signal trampoline recognition
|
||
function for GDBARCH to SIGNAL_FRAME_P. */
|
||
|
||
void
|
||
dwarf2_frame_set_signal_frame_p (struct gdbarch *gdbarch,
|
||
int (*signal_frame_p) (struct gdbarch *,
|
||
struct frame_info *))
|
||
{
|
||
struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
|
||
|
||
ops->signal_frame_p = signal_frame_p;
|
||
}
|
||
|
||
/* Query the architecture-specific signal frame recognizer for
|
||
THIS_FRAME. */
|
||
|
||
static int
|
||
dwarf2_frame_signal_frame_p (struct gdbarch *gdbarch,
|
||
struct frame_info *this_frame)
|
||
{
|
||
struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
|
||
|
||
if (ops->signal_frame_p == NULL)
|
||
return 0;
|
||
return ops->signal_frame_p (gdbarch, this_frame);
|
||
}
|
||
|
||
/* Set the architecture-specific adjustment of .eh_frame and .debug_frame
|
||
register numbers. */
|
||
|
||
void
|
||
dwarf2_frame_set_adjust_regnum (struct gdbarch *gdbarch,
|
||
int (*adjust_regnum) (struct gdbarch *,
|
||
int, int))
|
||
{
|
||
struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
|
||
|
||
ops->adjust_regnum = adjust_regnum;
|
||
}
|
||
|
||
/* Translate a .eh_frame register to DWARF register, or adjust a .debug_frame
|
||
register. */
|
||
|
||
static int
|
||
dwarf2_frame_adjust_regnum (struct gdbarch *gdbarch,
|
||
int regnum, int eh_frame_p)
|
||
{
|
||
struct dwarf2_frame_ops *ops = gdbarch_data (gdbarch, dwarf2_frame_data);
|
||
|
||
if (ops->adjust_regnum == NULL)
|
||
return regnum;
|
||
return ops->adjust_regnum (gdbarch, regnum, eh_frame_p);
|
||
}
|
||
|
||
static void
|
||
dwarf2_frame_find_quirks (struct dwarf2_frame_state *fs,
|
||
struct dwarf2_fde *fde)
|
||
{
|
||
struct compunit_symtab *cust;
|
||
|
||
cust = find_pc_compunit_symtab (fs->pc);
|
||
if (cust == NULL)
|
||
return;
|
||
|
||
if (producer_is_realview (COMPUNIT_PRODUCER (cust)))
|
||
{
|
||
if (fde->cie->version == 1)
|
||
fs->armcc_cfa_offsets_sf = 1;
|
||
|
||
if (fde->cie->version == 1)
|
||
fs->armcc_cfa_offsets_reversed = 1;
|
||
|
||
/* The reversed offset problem is present in some compilers
|
||
using DWARF3, but it was eventually fixed. Check the ARM
|
||
defined augmentations, which are in the format "armcc" followed
|
||
by a list of one-character options. The "+" option means
|
||
this problem is fixed (no quirk needed). If the armcc
|
||
augmentation is missing, the quirk is needed. */
|
||
if (fde->cie->version == 3
|
||
&& (!startswith (fde->cie->augmentation, "armcc")
|
||
|| strchr (fde->cie->augmentation + 5, '+') == NULL))
|
||
fs->armcc_cfa_offsets_reversed = 1;
|
||
|
||
return;
|
||
}
|
||
}
|
||
|
||
|
||
/* See dwarf2-frame.h. */
|
||
|
||
int
|
||
dwarf2_fetch_cfa_info (struct gdbarch *gdbarch, CORE_ADDR pc,
|
||
struct dwarf2_per_cu_data *data,
|
||
int *regnum_out, LONGEST *offset_out,
|
||
CORE_ADDR *text_offset_out,
|
||
const gdb_byte **cfa_start_out,
|
||
const gdb_byte **cfa_end_out)
|
||
{
|
||
struct dwarf2_fde *fde;
|
||
CORE_ADDR text_offset;
|
||
struct dwarf2_frame_state fs;
|
||
int addr_size;
|
||
|
||
memset (&fs, 0, sizeof (struct dwarf2_frame_state));
|
||
|
||
fs.pc = pc;
|
||
|
||
/* Find the correct FDE. */
|
||
fde = dwarf2_frame_find_fde (&fs.pc, &text_offset);
|
||
if (fde == NULL)
|
||
error (_("Could not compute CFA; needed to translate this expression"));
|
||
|
||
/* Extract any interesting information from the CIE. */
|
||
fs.data_align = fde->cie->data_alignment_factor;
|
||
fs.code_align = fde->cie->code_alignment_factor;
|
||
fs.retaddr_column = fde->cie->return_address_register;
|
||
addr_size = fde->cie->addr_size;
|
||
|
||
/* Check for "quirks" - known bugs in producers. */
|
||
dwarf2_frame_find_quirks (&fs, fde);
|
||
|
||
/* First decode all the insns in the CIE. */
|
||
execute_cfa_program (fde, fde->cie->initial_instructions,
|
||
fde->cie->end, gdbarch, pc, &fs);
|
||
|
||
/* Save the initialized register set. */
|
||
fs.initial = fs.regs;
|
||
fs.initial.reg = dwarf2_frame_state_copy_regs (&fs.regs);
|
||
|
||
/* Then decode the insns in the FDE up to our target PC. */
|
||
execute_cfa_program (fde, fde->instructions, fde->end, gdbarch, pc, &fs);
|
||
|
||
/* Calculate the CFA. */
|
||
switch (fs.regs.cfa_how)
|
||
{
|
||
case CFA_REG_OFFSET:
|
||
{
|
||
int regnum = gdbarch_dwarf2_reg_to_regnum (gdbarch, fs.regs.cfa_reg);
|
||
|
||
if (regnum == -1)
|
||
error (_("Unable to access DWARF register number %d"),
|
||
(int) fs.regs.cfa_reg); /* FIXME */
|
||
|
||
*regnum_out = regnum;
|
||
if (fs.armcc_cfa_offsets_reversed)
|
||
*offset_out = -fs.regs.cfa_offset;
|
||
else
|
||
*offset_out = fs.regs.cfa_offset;
|
||
return 1;
|
||
}
|
||
|
||
case CFA_EXP:
|
||
*text_offset_out = text_offset;
|
||
*cfa_start_out = fs.regs.cfa_exp;
|
||
*cfa_end_out = fs.regs.cfa_exp + fs.regs.cfa_exp_len;
|
||
return 0;
|
||
|
||
default:
|
||
internal_error (__FILE__, __LINE__, _("Unknown CFA rule."));
|
||
}
|
||
}
|
||
|
||
|
||
struct dwarf2_frame_cache
|
||
{
|
||
/* DWARF Call Frame Address. */
|
||
CORE_ADDR cfa;
|
||
|
||
/* Set if the return address column was marked as unavailable
|
||
(required non-collected memory or registers to compute). */
|
||
int unavailable_retaddr;
|
||
|
||
/* Set if the return address column was marked as undefined. */
|
||
int undefined_retaddr;
|
||
|
||
/* Saved registers, indexed by GDB register number, not by DWARF
|
||
register number. */
|
||
struct dwarf2_frame_state_reg *reg;
|
||
|
||
/* Return address register. */
|
||
struct dwarf2_frame_state_reg retaddr_reg;
|
||
|
||
/* Target address size in bytes. */
|
||
int addr_size;
|
||
|
||
/* The .text offset. */
|
||
CORE_ADDR text_offset;
|
||
|
||
/* True if we already checked whether this frame is the bottom frame
|
||
of a virtual tail call frame chain. */
|
||
int checked_tailcall_bottom;
|
||
|
||
/* If not NULL then this frame is the bottom frame of a TAILCALL_FRAME
|
||
sequence. If NULL then it is a normal case with no TAILCALL_FRAME
|
||
involved. Non-bottom frames of a virtual tail call frames chain use
|
||
dwarf2_tailcall_frame_unwind unwinder so this field does not apply for
|
||
them. */
|
||
void *tailcall_cache;
|
||
|
||
/* The number of bytes to subtract from TAILCALL_FRAME frames frame
|
||
base to get the SP, to simulate the return address pushed on the
|
||
stack. */
|
||
LONGEST entry_cfa_sp_offset;
|
||
int entry_cfa_sp_offset_p;
|
||
};
|
||
|
||
/* A cleanup that sets a pointer to NULL. */
|
||
|
||
static void
|
||
clear_pointer_cleanup (void *arg)
|
||
{
|
||
void **ptr = arg;
|
||
|
||
*ptr = NULL;
|
||
}
|
||
|
||
static struct dwarf2_frame_cache *
|
||
dwarf2_frame_cache (struct frame_info *this_frame, void **this_cache)
|
||
{
|
||
struct cleanup *reset_cache_cleanup, *old_chain;
|
||
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
||
const int num_regs = gdbarch_num_regs (gdbarch)
|
||
+ gdbarch_num_pseudo_regs (gdbarch);
|
||
struct dwarf2_frame_cache *cache;
|
||
struct dwarf2_frame_state *fs;
|
||
struct dwarf2_fde *fde;
|
||
CORE_ADDR entry_pc;
|
||
const gdb_byte *instr;
|
||
|
||
if (*this_cache)
|
||
return *this_cache;
|
||
|
||
/* Allocate a new cache. */
|
||
cache = FRAME_OBSTACK_ZALLOC (struct dwarf2_frame_cache);
|
||
cache->reg = FRAME_OBSTACK_CALLOC (num_regs, struct dwarf2_frame_state_reg);
|
||
*this_cache = cache;
|
||
reset_cache_cleanup = make_cleanup (clear_pointer_cleanup, this_cache);
|
||
|
||
/* Allocate and initialize the frame state. */
|
||
fs = XCNEW (struct dwarf2_frame_state);
|
||
old_chain = make_cleanup (dwarf2_frame_state_free, fs);
|
||
|
||
/* Unwind the PC.
|
||
|
||
Note that if the next frame is never supposed to return (i.e. a call
|
||
to abort), the compiler might optimize away the instruction at
|
||
its return address. As a result the return address will
|
||
point at some random instruction, and the CFI for that
|
||
instruction is probably worthless to us. GCC's unwinder solves
|
||
this problem by substracting 1 from the return address to get an
|
||
address in the middle of a presumed call instruction (or the
|
||
instruction in the associated delay slot). This should only be
|
||
done for "normal" frames and not for resume-type frames (signal
|
||
handlers, sentinel frames, dummy frames). The function
|
||
get_frame_address_in_block does just this. It's not clear how
|
||
reliable the method is though; there is the potential for the
|
||
register state pre-call being different to that on return. */
|
||
fs->pc = get_frame_address_in_block (this_frame);
|
||
|
||
/* Find the correct FDE. */
|
||
fde = dwarf2_frame_find_fde (&fs->pc, &cache->text_offset);
|
||
gdb_assert (fde != NULL);
|
||
|
||
/* Extract any interesting information from the CIE. */
|
||
fs->data_align = fde->cie->data_alignment_factor;
|
||
fs->code_align = fde->cie->code_alignment_factor;
|
||
fs->retaddr_column = fde->cie->return_address_register;
|
||
cache->addr_size = fde->cie->addr_size;
|
||
|
||
/* Check for "quirks" - known bugs in producers. */
|
||
dwarf2_frame_find_quirks (fs, fde);
|
||
|
||
/* First decode all the insns in the CIE. */
|
||
execute_cfa_program (fde, fde->cie->initial_instructions,
|
||
fde->cie->end, gdbarch,
|
||
get_frame_address_in_block (this_frame), fs);
|
||
|
||
/* Save the initialized register set. */
|
||
fs->initial = fs->regs;
|
||
fs->initial.reg = dwarf2_frame_state_copy_regs (&fs->regs);
|
||
|
||
if (get_frame_func_if_available (this_frame, &entry_pc))
|
||
{
|
||
/* Decode the insns in the FDE up to the entry PC. */
|
||
instr = execute_cfa_program (fde, fde->instructions, fde->end, gdbarch,
|
||
entry_pc, fs);
|
||
|
||
if (fs->regs.cfa_how == CFA_REG_OFFSET
|
||
&& (gdbarch_dwarf2_reg_to_regnum (gdbarch, fs->regs.cfa_reg)
|
||
== gdbarch_sp_regnum (gdbarch)))
|
||
{
|
||
cache->entry_cfa_sp_offset = fs->regs.cfa_offset;
|
||
cache->entry_cfa_sp_offset_p = 1;
|
||
}
|
||
}
|
||
else
|
||
instr = fde->instructions;
|
||
|
||
/* Then decode the insns in the FDE up to our target PC. */
|
||
execute_cfa_program (fde, instr, fde->end, gdbarch,
|
||
get_frame_address_in_block (this_frame), fs);
|
||
|
||
TRY
|
||
{
|
||
/* Calculate the CFA. */
|
||
switch (fs->regs.cfa_how)
|
||
{
|
||
case CFA_REG_OFFSET:
|
||
cache->cfa = read_addr_from_reg (this_frame, fs->regs.cfa_reg);
|
||
if (fs->armcc_cfa_offsets_reversed)
|
||
cache->cfa -= fs->regs.cfa_offset;
|
||
else
|
||
cache->cfa += fs->regs.cfa_offset;
|
||
break;
|
||
|
||
case CFA_EXP:
|
||
cache->cfa =
|
||
execute_stack_op (fs->regs.cfa_exp, fs->regs.cfa_exp_len,
|
||
cache->addr_size, cache->text_offset,
|
||
this_frame, 0, 0);
|
||
break;
|
||
|
||
default:
|
||
internal_error (__FILE__, __LINE__, _("Unknown CFA rule."));
|
||
}
|
||
}
|
||
CATCH (ex, RETURN_MASK_ERROR)
|
||
{
|
||
if (ex.error == NOT_AVAILABLE_ERROR)
|
||
{
|
||
cache->unavailable_retaddr = 1;
|
||
do_cleanups (old_chain);
|
||
discard_cleanups (reset_cache_cleanup);
|
||
return cache;
|
||
}
|
||
|
||
throw_exception (ex);
|
||
}
|
||
END_CATCH
|
||
|
||
/* Initialize the register state. */
|
||
{
|
||
int regnum;
|
||
|
||
for (regnum = 0; regnum < num_regs; regnum++)
|
||
dwarf2_frame_init_reg (gdbarch, regnum, &cache->reg[regnum], this_frame);
|
||
}
|
||
|
||
/* Go through the DWARF2 CFI generated table and save its register
|
||
location information in the cache. Note that we don't skip the
|
||
return address column; it's perfectly all right for it to
|
||
correspond to a real register. If it doesn't correspond to a
|
||
real register, or if we shouldn't treat it as such,
|
||
gdbarch_dwarf2_reg_to_regnum should be defined to return a number outside
|
||
the range [0, gdbarch_num_regs). */
|
||
{
|
||
int column; /* CFI speak for "register number". */
|
||
|
||
for (column = 0; column < fs->regs.num_regs; column++)
|
||
{
|
||
/* Use the GDB register number as the destination index. */
|
||
int regnum = gdbarch_dwarf2_reg_to_regnum (gdbarch, column);
|
||
|
||
/* If there's no corresponding GDB register, ignore it. */
|
||
if (regnum < 0 || regnum >= num_regs)
|
||
continue;
|
||
|
||
/* NOTE: cagney/2003-09-05: CFI should specify the disposition
|
||
of all debug info registers. If it doesn't, complain (but
|
||
not too loudly). It turns out that GCC assumes that an
|
||
unspecified register implies "same value" when CFI (draft
|
||
7) specifies nothing at all. Such a register could equally
|
||
be interpreted as "undefined". Also note that this check
|
||
isn't sufficient; it only checks that all registers in the
|
||
range [0 .. max column] are specified, and won't detect
|
||
problems when a debug info register falls outside of the
|
||
table. We need a way of iterating through all the valid
|
||
DWARF2 register numbers. */
|
||
if (fs->regs.reg[column].how == DWARF2_FRAME_REG_UNSPECIFIED)
|
||
{
|
||
if (cache->reg[regnum].how == DWARF2_FRAME_REG_UNSPECIFIED)
|
||
complaint (&symfile_complaints, _("\
|
||
incomplete CFI data; unspecified registers (e.g., %s) at %s"),
|
||
gdbarch_register_name (gdbarch, regnum),
|
||
paddress (gdbarch, fs->pc));
|
||
}
|
||
else
|
||
cache->reg[regnum] = fs->regs.reg[column];
|
||
}
|
||
}
|
||
|
||
/* Eliminate any DWARF2_FRAME_REG_RA rules, and save the information
|
||
we need for evaluating DWARF2_FRAME_REG_RA_OFFSET rules. */
|
||
{
|
||
int regnum;
|
||
|
||
for (regnum = 0; regnum < num_regs; regnum++)
|
||
{
|
||
if (cache->reg[regnum].how == DWARF2_FRAME_REG_RA
|
||
|| cache->reg[regnum].how == DWARF2_FRAME_REG_RA_OFFSET)
|
||
{
|
||
struct dwarf2_frame_state_reg *retaddr_reg =
|
||
&fs->regs.reg[fs->retaddr_column];
|
||
|
||
/* It seems rather bizarre to specify an "empty" column as
|
||
the return adress column. However, this is exactly
|
||
what GCC does on some targets. It turns out that GCC
|
||
assumes that the return address can be found in the
|
||
register corresponding to the return address column.
|
||
Incidentally, that's how we should treat a return
|
||
address column specifying "same value" too. */
|
||
if (fs->retaddr_column < fs->regs.num_regs
|
||
&& retaddr_reg->how != DWARF2_FRAME_REG_UNSPECIFIED
|
||
&& retaddr_reg->how != DWARF2_FRAME_REG_SAME_VALUE)
|
||
{
|
||
if (cache->reg[regnum].how == DWARF2_FRAME_REG_RA)
|
||
cache->reg[regnum] = *retaddr_reg;
|
||
else
|
||
cache->retaddr_reg = *retaddr_reg;
|
||
}
|
||
else
|
||
{
|
||
if (cache->reg[regnum].how == DWARF2_FRAME_REG_RA)
|
||
{
|
||
cache->reg[regnum].loc.reg = fs->retaddr_column;
|
||
cache->reg[regnum].how = DWARF2_FRAME_REG_SAVED_REG;
|
||
}
|
||
else
|
||
{
|
||
cache->retaddr_reg.loc.reg = fs->retaddr_column;
|
||
cache->retaddr_reg.how = DWARF2_FRAME_REG_SAVED_REG;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
if (fs->retaddr_column < fs->regs.num_regs
|
||
&& fs->regs.reg[fs->retaddr_column].how == DWARF2_FRAME_REG_UNDEFINED)
|
||
cache->undefined_retaddr = 1;
|
||
|
||
do_cleanups (old_chain);
|
||
discard_cleanups (reset_cache_cleanup);
|
||
return cache;
|
||
}
|
||
|
||
static enum unwind_stop_reason
|
||
dwarf2_frame_unwind_stop_reason (struct frame_info *this_frame,
|
||
void **this_cache)
|
||
{
|
||
struct dwarf2_frame_cache *cache
|
||
= dwarf2_frame_cache (this_frame, this_cache);
|
||
|
||
if (cache->unavailable_retaddr)
|
||
return UNWIND_UNAVAILABLE;
|
||
|
||
if (cache->undefined_retaddr)
|
||
return UNWIND_OUTERMOST;
|
||
|
||
return UNWIND_NO_REASON;
|
||
}
|
||
|
||
static void
|
||
dwarf2_frame_this_id (struct frame_info *this_frame, void **this_cache,
|
||
struct frame_id *this_id)
|
||
{
|
||
struct dwarf2_frame_cache *cache =
|
||
dwarf2_frame_cache (this_frame, this_cache);
|
||
|
||
if (cache->unavailable_retaddr)
|
||
(*this_id) = frame_id_build_unavailable_stack (get_frame_func (this_frame));
|
||
else if (cache->undefined_retaddr)
|
||
return;
|
||
else
|
||
(*this_id) = frame_id_build (cache->cfa, get_frame_func (this_frame));
|
||
}
|
||
|
||
static struct value *
|
||
dwarf2_frame_prev_register (struct frame_info *this_frame, void **this_cache,
|
||
int regnum)
|
||
{
|
||
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
||
struct dwarf2_frame_cache *cache =
|
||
dwarf2_frame_cache (this_frame, this_cache);
|
||
CORE_ADDR addr;
|
||
int realnum;
|
||
|
||
/* Check whether THIS_FRAME is the bottom frame of a virtual tail
|
||
call frame chain. */
|
||
if (!cache->checked_tailcall_bottom)
|
||
{
|
||
cache->checked_tailcall_bottom = 1;
|
||
dwarf2_tailcall_sniffer_first (this_frame, &cache->tailcall_cache,
|
||
(cache->entry_cfa_sp_offset_p
|
||
? &cache->entry_cfa_sp_offset : NULL));
|
||
}
|
||
|
||
/* Non-bottom frames of a virtual tail call frames chain use
|
||
dwarf2_tailcall_frame_unwind unwinder so this code does not apply for
|
||
them. If dwarf2_tailcall_prev_register_first does not have specific value
|
||
unwind the register, tail call frames are assumed to have the register set
|
||
of the top caller. */
|
||
if (cache->tailcall_cache)
|
||
{
|
||
struct value *val;
|
||
|
||
val = dwarf2_tailcall_prev_register_first (this_frame,
|
||
&cache->tailcall_cache,
|
||
regnum);
|
||
if (val)
|
||
return val;
|
||
}
|
||
|
||
switch (cache->reg[regnum].how)
|
||
{
|
||
case DWARF2_FRAME_REG_UNDEFINED:
|
||
/* If CFI explicitly specified that the value isn't defined,
|
||
mark it as optimized away; the value isn't available. */
|
||
return frame_unwind_got_optimized (this_frame, regnum);
|
||
|
||
case DWARF2_FRAME_REG_SAVED_OFFSET:
|
||
addr = cache->cfa + cache->reg[regnum].loc.offset;
|
||
return frame_unwind_got_memory (this_frame, regnum, addr);
|
||
|
||
case DWARF2_FRAME_REG_SAVED_REG:
|
||
realnum
|
||
= gdbarch_dwarf2_reg_to_regnum (gdbarch, cache->reg[regnum].loc.reg);
|
||
return frame_unwind_got_register (this_frame, regnum, realnum);
|
||
|
||
case DWARF2_FRAME_REG_SAVED_EXP:
|
||
addr = execute_stack_op (cache->reg[regnum].loc.exp,
|
||
cache->reg[regnum].exp_len,
|
||
cache->addr_size, cache->text_offset,
|
||
this_frame, cache->cfa, 1);
|
||
return frame_unwind_got_memory (this_frame, regnum, addr);
|
||
|
||
case DWARF2_FRAME_REG_SAVED_VAL_OFFSET:
|
||
addr = cache->cfa + cache->reg[regnum].loc.offset;
|
||
return frame_unwind_got_constant (this_frame, regnum, addr);
|
||
|
||
case DWARF2_FRAME_REG_SAVED_VAL_EXP:
|
||
addr = execute_stack_op (cache->reg[regnum].loc.exp,
|
||
cache->reg[regnum].exp_len,
|
||
cache->addr_size, cache->text_offset,
|
||
this_frame, cache->cfa, 1);
|
||
return frame_unwind_got_constant (this_frame, regnum, addr);
|
||
|
||
case DWARF2_FRAME_REG_UNSPECIFIED:
|
||
/* GCC, in its infinite wisdom decided to not provide unwind
|
||
information for registers that are "same value". Since
|
||
DWARF2 (3 draft 7) doesn't define such behavior, said
|
||
registers are actually undefined (which is different to CFI
|
||
"undefined"). Code above issues a complaint about this.
|
||
Here just fudge the books, assume GCC, and that the value is
|
||
more inner on the stack. */
|
||
return frame_unwind_got_register (this_frame, regnum, regnum);
|
||
|
||
case DWARF2_FRAME_REG_SAME_VALUE:
|
||
return frame_unwind_got_register (this_frame, regnum, regnum);
|
||
|
||
case DWARF2_FRAME_REG_CFA:
|
||
return frame_unwind_got_address (this_frame, regnum, cache->cfa);
|
||
|
||
case DWARF2_FRAME_REG_CFA_OFFSET:
|
||
addr = cache->cfa + cache->reg[regnum].loc.offset;
|
||
return frame_unwind_got_address (this_frame, regnum, addr);
|
||
|
||
case DWARF2_FRAME_REG_RA_OFFSET:
|
||
addr = cache->reg[regnum].loc.offset;
|
||
regnum = gdbarch_dwarf2_reg_to_regnum
|
||
(gdbarch, cache->retaddr_reg.loc.reg);
|
||
addr += get_frame_register_unsigned (this_frame, regnum);
|
||
return frame_unwind_got_address (this_frame, regnum, addr);
|
||
|
||
case DWARF2_FRAME_REG_FN:
|
||
return cache->reg[regnum].loc.fn (this_frame, this_cache, regnum);
|
||
|
||
default:
|
||
internal_error (__FILE__, __LINE__, _("Unknown register rule."));
|
||
}
|
||
}
|
||
|
||
/* Proxy for tailcall_frame_dealloc_cache for bottom frame of a virtual tail
|
||
call frames chain. */
|
||
|
||
static void
|
||
dwarf2_frame_dealloc_cache (struct frame_info *self, void *this_cache)
|
||
{
|
||
struct dwarf2_frame_cache *cache = dwarf2_frame_cache (self, &this_cache);
|
||
|
||
if (cache->tailcall_cache)
|
||
dwarf2_tailcall_frame_unwind.dealloc_cache (self, cache->tailcall_cache);
|
||
}
|
||
|
||
static int
|
||
dwarf2_frame_sniffer (const struct frame_unwind *self,
|
||
struct frame_info *this_frame, void **this_cache)
|
||
{
|
||
/* Grab an address that is guarenteed to reside somewhere within the
|
||
function. get_frame_pc(), with a no-return next function, can
|
||
end up returning something past the end of this function's body.
|
||
If the frame we're sniffing for is a signal frame whose start
|
||
address is placed on the stack by the OS, its FDE must
|
||
extend one byte before its start address or we could potentially
|
||
select the FDE of the previous function. */
|
||
CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
|
||
struct dwarf2_fde *fde = dwarf2_frame_find_fde (&block_addr, NULL);
|
||
|
||
if (!fde)
|
||
return 0;
|
||
|
||
/* On some targets, signal trampolines may have unwind information.
|
||
We need to recognize them so that we set the frame type
|
||
correctly. */
|
||
|
||
if (fde->cie->signal_frame
|
||
|| dwarf2_frame_signal_frame_p (get_frame_arch (this_frame),
|
||
this_frame))
|
||
return self->type == SIGTRAMP_FRAME;
|
||
|
||
if (self->type != NORMAL_FRAME)
|
||
return 0;
|
||
|
||
return 1;
|
||
}
|
||
|
||
static const struct frame_unwind dwarf2_frame_unwind =
|
||
{
|
||
NORMAL_FRAME,
|
||
dwarf2_frame_unwind_stop_reason,
|
||
dwarf2_frame_this_id,
|
||
dwarf2_frame_prev_register,
|
||
NULL,
|
||
dwarf2_frame_sniffer,
|
||
dwarf2_frame_dealloc_cache
|
||
};
|
||
|
||
static const struct frame_unwind dwarf2_signal_frame_unwind =
|
||
{
|
||
SIGTRAMP_FRAME,
|
||
dwarf2_frame_unwind_stop_reason,
|
||
dwarf2_frame_this_id,
|
||
dwarf2_frame_prev_register,
|
||
NULL,
|
||
dwarf2_frame_sniffer,
|
||
|
||
/* TAILCALL_CACHE can never be in such frame to need dealloc_cache. */
|
||
NULL
|
||
};
|
||
|
||
/* Append the DWARF-2 frame unwinders to GDBARCH's list. */
|
||
|
||
void
|
||
dwarf2_append_unwinders (struct gdbarch *gdbarch)
|
||
{
|
||
/* TAILCALL_FRAME must be first to find the record by
|
||
dwarf2_tailcall_sniffer_first. */
|
||
frame_unwind_append_unwinder (gdbarch, &dwarf2_tailcall_frame_unwind);
|
||
|
||
frame_unwind_append_unwinder (gdbarch, &dwarf2_frame_unwind);
|
||
frame_unwind_append_unwinder (gdbarch, &dwarf2_signal_frame_unwind);
|
||
}
|
||
|
||
|
||
/* There is no explicitly defined relationship between the CFA and the
|
||
location of frame's local variables and arguments/parameters.
|
||
Therefore, frame base methods on this page should probably only be
|
||
used as a last resort, just to avoid printing total garbage as a
|
||
response to the "info frame" command. */
|
||
|
||
static CORE_ADDR
|
||
dwarf2_frame_base_address (struct frame_info *this_frame, void **this_cache)
|
||
{
|
||
struct dwarf2_frame_cache *cache =
|
||
dwarf2_frame_cache (this_frame, this_cache);
|
||
|
||
return cache->cfa;
|
||
}
|
||
|
||
static const struct frame_base dwarf2_frame_base =
|
||
{
|
||
&dwarf2_frame_unwind,
|
||
dwarf2_frame_base_address,
|
||
dwarf2_frame_base_address,
|
||
dwarf2_frame_base_address
|
||
};
|
||
|
||
const struct frame_base *
|
||
dwarf2_frame_base_sniffer (struct frame_info *this_frame)
|
||
{
|
||
CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
|
||
|
||
if (dwarf2_frame_find_fde (&block_addr, NULL))
|
||
return &dwarf2_frame_base;
|
||
|
||
return NULL;
|
||
}
|
||
|
||
/* Compute the CFA for THIS_FRAME, but only if THIS_FRAME came from
|
||
the DWARF unwinder. This is used to implement
|
||
DW_OP_call_frame_cfa. */
|
||
|
||
CORE_ADDR
|
||
dwarf2_frame_cfa (struct frame_info *this_frame)
|
||
{
|
||
if (frame_unwinder_is (this_frame, &record_btrace_tailcall_frame_unwind)
|
||
|| frame_unwinder_is (this_frame, &record_btrace_frame_unwind))
|
||
throw_error (NOT_AVAILABLE_ERROR,
|
||
_("cfa not available for record btrace target"));
|
||
|
||
while (get_frame_type (this_frame) == INLINE_FRAME)
|
||
this_frame = get_prev_frame (this_frame);
|
||
if (get_frame_unwind_stop_reason (this_frame) == UNWIND_UNAVAILABLE)
|
||
throw_error (NOT_AVAILABLE_ERROR,
|
||
_("can't compute CFA for this frame: "
|
||
"required registers or memory are unavailable"));
|
||
|
||
if (get_frame_id (this_frame).stack_status != FID_STACK_VALID)
|
||
throw_error (NOT_AVAILABLE_ERROR,
|
||
_("can't compute CFA for this frame: "
|
||
"frame base not available"));
|
||
|
||
return get_frame_base (this_frame);
|
||
}
|
||
|
||
const struct objfile_data *dwarf2_frame_objfile_data;
|
||
|
||
static unsigned int
|
||
read_1_byte (bfd *abfd, const gdb_byte *buf)
|
||
{
|
||
return bfd_get_8 (abfd, buf);
|
||
}
|
||
|
||
static unsigned int
|
||
read_4_bytes (bfd *abfd, const gdb_byte *buf)
|
||
{
|
||
return bfd_get_32 (abfd, buf);
|
||
}
|
||
|
||
static ULONGEST
|
||
read_8_bytes (bfd *abfd, const gdb_byte *buf)
|
||
{
|
||
return bfd_get_64 (abfd, buf);
|
||
}
|
||
|
||
static ULONGEST
|
||
read_initial_length (bfd *abfd, const gdb_byte *buf,
|
||
unsigned int *bytes_read_ptr)
|
||
{
|
||
LONGEST result;
|
||
|
||
result = bfd_get_32 (abfd, buf);
|
||
if (result == 0xffffffff)
|
||
{
|
||
result = bfd_get_64 (abfd, buf + 4);
|
||
*bytes_read_ptr = 12;
|
||
}
|
||
else
|
||
*bytes_read_ptr = 4;
|
||
|
||
return result;
|
||
}
|
||
|
||
|
||
/* Pointer encoding helper functions. */
|
||
|
||
/* GCC supports exception handling based on DWARF2 CFI. However, for
|
||
technical reasons, it encodes addresses in its FDE's in a different
|
||
way. Several "pointer encodings" are supported. The encoding
|
||
that's used for a particular FDE is determined by the 'R'
|
||
augmentation in the associated CIE. The argument of this
|
||
augmentation is a single byte.
|
||
|
||
The address can be encoded as 2 bytes, 4 bytes, 8 bytes, or as a
|
||
LEB128. This is encoded in bits 0, 1 and 2. Bit 3 encodes whether
|
||
the address is signed or unsigned. Bits 4, 5 and 6 encode how the
|
||
address should be interpreted (absolute, relative to the current
|
||
position in the FDE, ...). Bit 7, indicates that the address
|
||
should be dereferenced. */
|
||
|
||
static gdb_byte
|
||
encoding_for_size (unsigned int size)
|
||
{
|
||
switch (size)
|
||
{
|
||
case 2:
|
||
return DW_EH_PE_udata2;
|
||
case 4:
|
||
return DW_EH_PE_udata4;
|
||
case 8:
|
||
return DW_EH_PE_udata8;
|
||
default:
|
||
internal_error (__FILE__, __LINE__, _("Unsupported address size"));
|
||
}
|
||
}
|
||
|
||
static CORE_ADDR
|
||
read_encoded_value (struct comp_unit *unit, gdb_byte encoding,
|
||
int ptr_len, const gdb_byte *buf,
|
||
unsigned int *bytes_read_ptr,
|
||
CORE_ADDR func_base)
|
||
{
|
||
ptrdiff_t offset;
|
||
CORE_ADDR base;
|
||
|
||
/* GCC currently doesn't generate DW_EH_PE_indirect encodings for
|
||
FDE's. */
|
||
if (encoding & DW_EH_PE_indirect)
|
||
internal_error (__FILE__, __LINE__,
|
||
_("Unsupported encoding: DW_EH_PE_indirect"));
|
||
|
||
*bytes_read_ptr = 0;
|
||
|
||
switch (encoding & 0x70)
|
||
{
|
||
case DW_EH_PE_absptr:
|
||
base = 0;
|
||
break;
|
||
case DW_EH_PE_pcrel:
|
||
base = bfd_get_section_vma (unit->abfd, unit->dwarf_frame_section);
|
||
base += (buf - unit->dwarf_frame_buffer);
|
||
break;
|
||
case DW_EH_PE_datarel:
|
||
base = unit->dbase;
|
||
break;
|
||
case DW_EH_PE_textrel:
|
||
base = unit->tbase;
|
||
break;
|
||
case DW_EH_PE_funcrel:
|
||
base = func_base;
|
||
break;
|
||
case DW_EH_PE_aligned:
|
||
base = 0;
|
||
offset = buf - unit->dwarf_frame_buffer;
|
||
if ((offset % ptr_len) != 0)
|
||
{
|
||
*bytes_read_ptr = ptr_len - (offset % ptr_len);
|
||
buf += *bytes_read_ptr;
|
||
}
|
||
break;
|
||
default:
|
||
internal_error (__FILE__, __LINE__,
|
||
_("Invalid or unsupported encoding"));
|
||
}
|
||
|
||
if ((encoding & 0x07) == 0x00)
|
||
{
|
||
encoding |= encoding_for_size (ptr_len);
|
||
if (bfd_get_sign_extend_vma (unit->abfd))
|
||
encoding |= DW_EH_PE_signed;
|
||
}
|
||
|
||
switch (encoding & 0x0f)
|
||
{
|
||
case DW_EH_PE_uleb128:
|
||
{
|
||
uint64_t value;
|
||
const gdb_byte *end_buf = buf + (sizeof (value) + 1) * 8 / 7;
|
||
|
||
*bytes_read_ptr += safe_read_uleb128 (buf, end_buf, &value) - buf;
|
||
return base + value;
|
||
}
|
||
case DW_EH_PE_udata2:
|
||
*bytes_read_ptr += 2;
|
||
return (base + bfd_get_16 (unit->abfd, (bfd_byte *) buf));
|
||
case DW_EH_PE_udata4:
|
||
*bytes_read_ptr += 4;
|
||
return (base + bfd_get_32 (unit->abfd, (bfd_byte *) buf));
|
||
case DW_EH_PE_udata8:
|
||
*bytes_read_ptr += 8;
|
||
return (base + bfd_get_64 (unit->abfd, (bfd_byte *) buf));
|
||
case DW_EH_PE_sleb128:
|
||
{
|
||
int64_t value;
|
||
const gdb_byte *end_buf = buf + (sizeof (value) + 1) * 8 / 7;
|
||
|
||
*bytes_read_ptr += safe_read_sleb128 (buf, end_buf, &value) - buf;
|
||
return base + value;
|
||
}
|
||
case DW_EH_PE_sdata2:
|
||
*bytes_read_ptr += 2;
|
||
return (base + bfd_get_signed_16 (unit->abfd, (bfd_byte *) buf));
|
||
case DW_EH_PE_sdata4:
|
||
*bytes_read_ptr += 4;
|
||
return (base + bfd_get_signed_32 (unit->abfd, (bfd_byte *) buf));
|
||
case DW_EH_PE_sdata8:
|
||
*bytes_read_ptr += 8;
|
||
return (base + bfd_get_signed_64 (unit->abfd, (bfd_byte *) buf));
|
||
default:
|
||
internal_error (__FILE__, __LINE__,
|
||
_("Invalid or unsupported encoding"));
|
||
}
|
||
}
|
||
|
||
|
||
static int
|
||
bsearch_cie_cmp (const void *key, const void *element)
|
||
{
|
||
ULONGEST cie_pointer = *(ULONGEST *) key;
|
||
struct dwarf2_cie *cie = *(struct dwarf2_cie **) element;
|
||
|
||
if (cie_pointer == cie->cie_pointer)
|
||
return 0;
|
||
|
||
return (cie_pointer < cie->cie_pointer) ? -1 : 1;
|
||
}
|
||
|
||
/* Find CIE with the given CIE_POINTER in CIE_TABLE. */
|
||
static struct dwarf2_cie *
|
||
find_cie (struct dwarf2_cie_table *cie_table, ULONGEST cie_pointer)
|
||
{
|
||
struct dwarf2_cie **p_cie;
|
||
|
||
/* The C standard (ISO/IEC 9899:TC2) requires the BASE argument to
|
||
bsearch be non-NULL. */
|
||
if (cie_table->entries == NULL)
|
||
{
|
||
gdb_assert (cie_table->num_entries == 0);
|
||
return NULL;
|
||
}
|
||
|
||
p_cie = bsearch (&cie_pointer, cie_table->entries, cie_table->num_entries,
|
||
sizeof (cie_table->entries[0]), bsearch_cie_cmp);
|
||
if (p_cie != NULL)
|
||
return *p_cie;
|
||
return NULL;
|
||
}
|
||
|
||
/* Add a pointer to new CIE to the CIE_TABLE, allocating space for it. */
|
||
static void
|
||
add_cie (struct dwarf2_cie_table *cie_table, struct dwarf2_cie *cie)
|
||
{
|
||
const int n = cie_table->num_entries;
|
||
|
||
gdb_assert (n < 1
|
||
|| cie_table->entries[n - 1]->cie_pointer < cie->cie_pointer);
|
||
|
||
cie_table->entries =
|
||
xrealloc (cie_table->entries, (n + 1) * sizeof (cie_table->entries[0]));
|
||
cie_table->entries[n] = cie;
|
||
cie_table->num_entries = n + 1;
|
||
}
|
||
|
||
static int
|
||
bsearch_fde_cmp (const void *key, const void *element)
|
||
{
|
||
CORE_ADDR seek_pc = *(CORE_ADDR *) key;
|
||
struct dwarf2_fde *fde = *(struct dwarf2_fde **) element;
|
||
|
||
if (seek_pc < fde->initial_location)
|
||
return -1;
|
||
if (seek_pc < fde->initial_location + fde->address_range)
|
||
return 0;
|
||
return 1;
|
||
}
|
||
|
||
/* Find the FDE for *PC. Return a pointer to the FDE, and store the
|
||
inital location associated with it into *PC. */
|
||
|
||
static struct dwarf2_fde *
|
||
dwarf2_frame_find_fde (CORE_ADDR *pc, CORE_ADDR *out_offset)
|
||
{
|
||
struct objfile *objfile;
|
||
|
||
ALL_OBJFILES (objfile)
|
||
{
|
||
struct dwarf2_fde_table *fde_table;
|
||
struct dwarf2_fde **p_fde;
|
||
CORE_ADDR offset;
|
||
CORE_ADDR seek_pc;
|
||
|
||
fde_table = objfile_data (objfile, dwarf2_frame_objfile_data);
|
||
if (fde_table == NULL)
|
||
{
|
||
dwarf2_build_frame_info (objfile);
|
||
fde_table = objfile_data (objfile, dwarf2_frame_objfile_data);
|
||
}
|
||
gdb_assert (fde_table != NULL);
|
||
|
||
if (fde_table->num_entries == 0)
|
||
continue;
|
||
|
||
gdb_assert (objfile->section_offsets);
|
||
offset = ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
|
||
|
||
gdb_assert (fde_table->num_entries > 0);
|
||
if (*pc < offset + fde_table->entries[0]->initial_location)
|
||
continue;
|
||
|
||
seek_pc = *pc - offset;
|
||
p_fde = bsearch (&seek_pc, fde_table->entries, fde_table->num_entries,
|
||
sizeof (fde_table->entries[0]), bsearch_fde_cmp);
|
||
if (p_fde != NULL)
|
||
{
|
||
*pc = (*p_fde)->initial_location + offset;
|
||
if (out_offset)
|
||
*out_offset = offset;
|
||
return *p_fde;
|
||
}
|
||
}
|
||
return NULL;
|
||
}
|
||
|
||
/* Add a pointer to new FDE to the FDE_TABLE, allocating space for it. */
|
||
static void
|
||
add_fde (struct dwarf2_fde_table *fde_table, struct dwarf2_fde *fde)
|
||
{
|
||
if (fde->address_range == 0)
|
||
/* Discard useless FDEs. */
|
||
return;
|
||
|
||
fde_table->num_entries += 1;
|
||
fde_table->entries =
|
||
xrealloc (fde_table->entries,
|
||
fde_table->num_entries * sizeof (fde_table->entries[0]));
|
||
fde_table->entries[fde_table->num_entries - 1] = fde;
|
||
}
|
||
|
||
#define DW64_CIE_ID 0xffffffffffffffffULL
|
||
|
||
/* Defines the type of eh_frames that are expected to be decoded: CIE, FDE
|
||
or any of them. */
|
||
|
||
enum eh_frame_type
|
||
{
|
||
EH_CIE_TYPE_ID = 1 << 0,
|
||
EH_FDE_TYPE_ID = 1 << 1,
|
||
EH_CIE_OR_FDE_TYPE_ID = EH_CIE_TYPE_ID | EH_FDE_TYPE_ID
|
||
};
|
||
|
||
static const gdb_byte *decode_frame_entry (struct comp_unit *unit,
|
||
const gdb_byte *start,
|
||
int eh_frame_p,
|
||
struct dwarf2_cie_table *cie_table,
|
||
struct dwarf2_fde_table *fde_table,
|
||
enum eh_frame_type entry_type);
|
||
|
||
/* Decode the next CIE or FDE, entry_type specifies the expected type.
|
||
Return NULL if invalid input, otherwise the next byte to be processed. */
|
||
|
||
static const gdb_byte *
|
||
decode_frame_entry_1 (struct comp_unit *unit, const gdb_byte *start,
|
||
int eh_frame_p,
|
||
struct dwarf2_cie_table *cie_table,
|
||
struct dwarf2_fde_table *fde_table,
|
||
enum eh_frame_type entry_type)
|
||
{
|
||
struct gdbarch *gdbarch = get_objfile_arch (unit->objfile);
|
||
const gdb_byte *buf, *end;
|
||
LONGEST length;
|
||
unsigned int bytes_read;
|
||
int dwarf64_p;
|
||
ULONGEST cie_id;
|
||
ULONGEST cie_pointer;
|
||
int64_t sleb128;
|
||
uint64_t uleb128;
|
||
|
||
buf = start;
|
||
length = read_initial_length (unit->abfd, buf, &bytes_read);
|
||
buf += bytes_read;
|
||
end = buf + length;
|
||
|
||
/* Are we still within the section? */
|
||
if (end > unit->dwarf_frame_buffer + unit->dwarf_frame_size)
|
||
return NULL;
|
||
|
||
if (length == 0)
|
||
return end;
|
||
|
||
/* Distinguish between 32 and 64-bit encoded frame info. */
|
||
dwarf64_p = (bytes_read == 12);
|
||
|
||
/* In a .eh_frame section, zero is used to distinguish CIEs from FDEs. */
|
||
if (eh_frame_p)
|
||
cie_id = 0;
|
||
else if (dwarf64_p)
|
||
cie_id = DW64_CIE_ID;
|
||
else
|
||
cie_id = DW_CIE_ID;
|
||
|
||
if (dwarf64_p)
|
||
{
|
||
cie_pointer = read_8_bytes (unit->abfd, buf);
|
||
buf += 8;
|
||
}
|
||
else
|
||
{
|
||
cie_pointer = read_4_bytes (unit->abfd, buf);
|
||
buf += 4;
|
||
}
|
||
|
||
if (cie_pointer == cie_id)
|
||
{
|
||
/* This is a CIE. */
|
||
struct dwarf2_cie *cie;
|
||
char *augmentation;
|
||
unsigned int cie_version;
|
||
|
||
/* Check that a CIE was expected. */
|
||
if ((entry_type & EH_CIE_TYPE_ID) == 0)
|
||
error (_("Found a CIE when not expecting it."));
|
||
|
||
/* Record the offset into the .debug_frame section of this CIE. */
|
||
cie_pointer = start - unit->dwarf_frame_buffer;
|
||
|
||
/* Check whether we've already read it. */
|
||
if (find_cie (cie_table, cie_pointer))
|
||
return end;
|
||
|
||
cie = (struct dwarf2_cie *)
|
||
obstack_alloc (&unit->objfile->objfile_obstack,
|
||
sizeof (struct dwarf2_cie));
|
||
cie->initial_instructions = NULL;
|
||
cie->cie_pointer = cie_pointer;
|
||
|
||
/* The encoding for FDE's in a normal .debug_frame section
|
||
depends on the target address size. */
|
||
cie->encoding = DW_EH_PE_absptr;
|
||
|
||
/* We'll determine the final value later, but we need to
|
||
initialize it conservatively. */
|
||
cie->signal_frame = 0;
|
||
|
||
/* Check version number. */
|
||
cie_version = read_1_byte (unit->abfd, buf);
|
||
if (cie_version != 1 && cie_version != 3 && cie_version != 4)
|
||
return NULL;
|
||
cie->version = cie_version;
|
||
buf += 1;
|
||
|
||
/* Interpret the interesting bits of the augmentation. */
|
||
cie->augmentation = augmentation = (char *) buf;
|
||
buf += (strlen (augmentation) + 1);
|
||
|
||
/* Ignore armcc augmentations. We only use them for quirks,
|
||
and that doesn't happen until later. */
|
||
if (startswith (augmentation, "armcc"))
|
||
augmentation += strlen (augmentation);
|
||
|
||
/* The GCC 2.x "eh" augmentation has a pointer immediately
|
||
following the augmentation string, so it must be handled
|
||
first. */
|
||
if (augmentation[0] == 'e' && augmentation[1] == 'h')
|
||
{
|
||
/* Skip. */
|
||
buf += gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT;
|
||
augmentation += 2;
|
||
}
|
||
|
||
if (cie->version >= 4)
|
||
{
|
||
/* FIXME: check that this is the same as from the CU header. */
|
||
cie->addr_size = read_1_byte (unit->abfd, buf);
|
||
++buf;
|
||
cie->segment_size = read_1_byte (unit->abfd, buf);
|
||
++buf;
|
||
}
|
||
else
|
||
{
|
||
cie->addr_size = gdbarch_dwarf2_addr_size (gdbarch);
|
||
cie->segment_size = 0;
|
||
}
|
||
/* Address values in .eh_frame sections are defined to have the
|
||
target's pointer size. Watchout: This breaks frame info for
|
||
targets with pointer size < address size, unless a .debug_frame
|
||
section exists as well. */
|
||
if (eh_frame_p)
|
||
cie->ptr_size = gdbarch_ptr_bit (gdbarch) / TARGET_CHAR_BIT;
|
||
else
|
||
cie->ptr_size = cie->addr_size;
|
||
|
||
buf = gdb_read_uleb128 (buf, end, &uleb128);
|
||
if (buf == NULL)
|
||
return NULL;
|
||
cie->code_alignment_factor = uleb128;
|
||
|
||
buf = gdb_read_sleb128 (buf, end, &sleb128);
|
||
if (buf == NULL)
|
||
return NULL;
|
||
cie->data_alignment_factor = sleb128;
|
||
|
||
if (cie_version == 1)
|
||
{
|
||
cie->return_address_register = read_1_byte (unit->abfd, buf);
|
||
++buf;
|
||
}
|
||
else
|
||
{
|
||
buf = gdb_read_uleb128 (buf, end, &uleb128);
|
||
if (buf == NULL)
|
||
return NULL;
|
||
cie->return_address_register = uleb128;
|
||
}
|
||
|
||
cie->return_address_register
|
||
= dwarf2_frame_adjust_regnum (gdbarch,
|
||
cie->return_address_register,
|
||
eh_frame_p);
|
||
|
||
cie->saw_z_augmentation = (*augmentation == 'z');
|
||
if (cie->saw_z_augmentation)
|
||
{
|
||
uint64_t length;
|
||
|
||
buf = gdb_read_uleb128 (buf, end, &length);
|
||
if (buf == NULL)
|
||
return NULL;
|
||
cie->initial_instructions = buf + length;
|
||
augmentation++;
|
||
}
|
||
|
||
while (*augmentation)
|
||
{
|
||
/* "L" indicates a byte showing how the LSDA pointer is encoded. */
|
||
if (*augmentation == 'L')
|
||
{
|
||
/* Skip. */
|
||
buf++;
|
||
augmentation++;
|
||
}
|
||
|
||
/* "R" indicates a byte indicating how FDE addresses are encoded. */
|
||
else if (*augmentation == 'R')
|
||
{
|
||
cie->encoding = *buf++;
|
||
augmentation++;
|
||
}
|
||
|
||
/* "P" indicates a personality routine in the CIE augmentation. */
|
||
else if (*augmentation == 'P')
|
||
{
|
||
/* Skip. Avoid indirection since we throw away the result. */
|
||
gdb_byte encoding = (*buf++) & ~DW_EH_PE_indirect;
|
||
read_encoded_value (unit, encoding, cie->ptr_size,
|
||
buf, &bytes_read, 0);
|
||
buf += bytes_read;
|
||
augmentation++;
|
||
}
|
||
|
||
/* "S" indicates a signal frame, such that the return
|
||
address must not be decremented to locate the call frame
|
||
info for the previous frame; it might even be the first
|
||
instruction of a function, so decrementing it would take
|
||
us to a different function. */
|
||
else if (*augmentation == 'S')
|
||
{
|
||
cie->signal_frame = 1;
|
||
augmentation++;
|
||
}
|
||
|
||
/* Otherwise we have an unknown augmentation. Assume that either
|
||
there is no augmentation data, or we saw a 'z' prefix. */
|
||
else
|
||
{
|
||
if (cie->initial_instructions)
|
||
buf = cie->initial_instructions;
|
||
break;
|
||
}
|
||
}
|
||
|
||
cie->initial_instructions = buf;
|
||
cie->end = end;
|
||
cie->unit = unit;
|
||
|
||
add_cie (cie_table, cie);
|
||
}
|
||
else
|
||
{
|
||
/* This is a FDE. */
|
||
struct dwarf2_fde *fde;
|
||
CORE_ADDR addr;
|
||
|
||
/* Check that an FDE was expected. */
|
||
if ((entry_type & EH_FDE_TYPE_ID) == 0)
|
||
error (_("Found an FDE when not expecting it."));
|
||
|
||
/* In an .eh_frame section, the CIE pointer is the delta between the
|
||
address within the FDE where the CIE pointer is stored and the
|
||
address of the CIE. Convert it to an offset into the .eh_frame
|
||
section. */
|
||
if (eh_frame_p)
|
||
{
|
||
cie_pointer = buf - unit->dwarf_frame_buffer - cie_pointer;
|
||
cie_pointer -= (dwarf64_p ? 8 : 4);
|
||
}
|
||
|
||
/* In either case, validate the result is still within the section. */
|
||
if (cie_pointer >= unit->dwarf_frame_size)
|
||
return NULL;
|
||
|
||
fde = (struct dwarf2_fde *)
|
||
obstack_alloc (&unit->objfile->objfile_obstack,
|
||
sizeof (struct dwarf2_fde));
|
||
fde->cie = find_cie (cie_table, cie_pointer);
|
||
if (fde->cie == NULL)
|
||
{
|
||
decode_frame_entry (unit, unit->dwarf_frame_buffer + cie_pointer,
|
||
eh_frame_p, cie_table, fde_table,
|
||
EH_CIE_TYPE_ID);
|
||
fde->cie = find_cie (cie_table, cie_pointer);
|
||
}
|
||
|
||
gdb_assert (fde->cie != NULL);
|
||
|
||
addr = read_encoded_value (unit, fde->cie->encoding, fde->cie->ptr_size,
|
||
buf, &bytes_read, 0);
|
||
fde->initial_location = gdbarch_adjust_dwarf2_addr (gdbarch, addr);
|
||
buf += bytes_read;
|
||
|
||
fde->address_range =
|
||
read_encoded_value (unit, fde->cie->encoding & 0x0f,
|
||
fde->cie->ptr_size, buf, &bytes_read, 0);
|
||
addr = gdbarch_adjust_dwarf2_addr (gdbarch, addr + fde->address_range);
|
||
fde->address_range = addr - fde->initial_location;
|
||
buf += bytes_read;
|
||
|
||
/* A 'z' augmentation in the CIE implies the presence of an
|
||
augmentation field in the FDE as well. The only thing known
|
||
to be in here at present is the LSDA entry for EH. So we
|
||
can skip the whole thing. */
|
||
if (fde->cie->saw_z_augmentation)
|
||
{
|
||
uint64_t length;
|
||
|
||
buf = gdb_read_uleb128 (buf, end, &length);
|
||
if (buf == NULL)
|
||
return NULL;
|
||
buf += length;
|
||
if (buf > end)
|
||
return NULL;
|
||
}
|
||
|
||
fde->instructions = buf;
|
||
fde->end = end;
|
||
|
||
fde->eh_frame_p = eh_frame_p;
|
||
|
||
add_fde (fde_table, fde);
|
||
}
|
||
|
||
return end;
|
||
}
|
||
|
||
/* Read a CIE or FDE in BUF and decode it. Entry_type specifies whether we
|
||
expect an FDE or a CIE. */
|
||
|
||
static const gdb_byte *
|
||
decode_frame_entry (struct comp_unit *unit, const gdb_byte *start,
|
||
int eh_frame_p,
|
||
struct dwarf2_cie_table *cie_table,
|
||
struct dwarf2_fde_table *fde_table,
|
||
enum eh_frame_type entry_type)
|
||
{
|
||
enum { NONE, ALIGN4, ALIGN8, FAIL } workaround = NONE;
|
||
const gdb_byte *ret;
|
||
ptrdiff_t start_offset;
|
||
|
||
while (1)
|
||
{
|
||
ret = decode_frame_entry_1 (unit, start, eh_frame_p,
|
||
cie_table, fde_table, entry_type);
|
||
if (ret != NULL)
|
||
break;
|
||
|
||
/* We have corrupt input data of some form. */
|
||
|
||
/* ??? Try, weakly, to work around compiler/assembler/linker bugs
|
||
and mismatches wrt padding and alignment of debug sections. */
|
||
/* Note that there is no requirement in the standard for any
|
||
alignment at all in the frame unwind sections. Testing for
|
||
alignment before trying to interpret data would be incorrect.
|
||
|
||
However, GCC traditionally arranged for frame sections to be
|
||
sized such that the FDE length and CIE fields happen to be
|
||
aligned (in theory, for performance). This, unfortunately,
|
||
was done with .align directives, which had the side effect of
|
||
forcing the section to be aligned by the linker.
|
||
|
||
This becomes a problem when you have some other producer that
|
||
creates frame sections that are not as strictly aligned. That
|
||
produces a hole in the frame info that gets filled by the
|
||
linker with zeros.
|
||
|
||
The GCC behaviour is arguably a bug, but it's effectively now
|
||
part of the ABI, so we're now stuck with it, at least at the
|
||
object file level. A smart linker may decide, in the process
|
||
of compressing duplicate CIE information, that it can rewrite
|
||
the entire output section without this extra padding. */
|
||
|
||
start_offset = start - unit->dwarf_frame_buffer;
|
||
if (workaround < ALIGN4 && (start_offset & 3) != 0)
|
||
{
|
||
start += 4 - (start_offset & 3);
|
||
workaround = ALIGN4;
|
||
continue;
|
||
}
|
||
if (workaround < ALIGN8 && (start_offset & 7) != 0)
|
||
{
|
||
start += 8 - (start_offset & 7);
|
||
workaround = ALIGN8;
|
||
continue;
|
||
}
|
||
|
||
/* Nothing left to try. Arrange to return as if we've consumed
|
||
the entire input section. Hopefully we'll get valid info from
|
||
the other of .debug_frame/.eh_frame. */
|
||
workaround = FAIL;
|
||
ret = unit->dwarf_frame_buffer + unit->dwarf_frame_size;
|
||
break;
|
||
}
|
||
|
||
switch (workaround)
|
||
{
|
||
case NONE:
|
||
break;
|
||
|
||
case ALIGN4:
|
||
complaint (&symfile_complaints, _("\
|
||
Corrupt data in %s:%s; align 4 workaround apparently succeeded"),
|
||
unit->dwarf_frame_section->owner->filename,
|
||
unit->dwarf_frame_section->name);
|
||
break;
|
||
|
||
case ALIGN8:
|
||
complaint (&symfile_complaints, _("\
|
||
Corrupt data in %s:%s; align 8 workaround apparently succeeded"),
|
||
unit->dwarf_frame_section->owner->filename,
|
||
unit->dwarf_frame_section->name);
|
||
break;
|
||
|
||
default:
|
||
complaint (&symfile_complaints,
|
||
_("Corrupt data in %s:%s"),
|
||
unit->dwarf_frame_section->owner->filename,
|
||
unit->dwarf_frame_section->name);
|
||
break;
|
||
}
|
||
|
||
return ret;
|
||
}
|
||
|
||
static int
|
||
qsort_fde_cmp (const void *a, const void *b)
|
||
{
|
||
struct dwarf2_fde *aa = *(struct dwarf2_fde **)a;
|
||
struct dwarf2_fde *bb = *(struct dwarf2_fde **)b;
|
||
|
||
if (aa->initial_location == bb->initial_location)
|
||
{
|
||
if (aa->address_range != bb->address_range
|
||
&& aa->eh_frame_p == 0 && bb->eh_frame_p == 0)
|
||
/* Linker bug, e.g. gold/10400.
|
||
Work around it by keeping stable sort order. */
|
||
return (a < b) ? -1 : 1;
|
||
else
|
||
/* Put eh_frame entries after debug_frame ones. */
|
||
return aa->eh_frame_p - bb->eh_frame_p;
|
||
}
|
||
|
||
return (aa->initial_location < bb->initial_location) ? -1 : 1;
|
||
}
|
||
|
||
void
|
||
dwarf2_build_frame_info (struct objfile *objfile)
|
||
{
|
||
struct comp_unit *unit;
|
||
const gdb_byte *frame_ptr;
|
||
struct dwarf2_cie_table cie_table;
|
||
struct dwarf2_fde_table fde_table;
|
||
struct dwarf2_fde_table *fde_table2;
|
||
|
||
cie_table.num_entries = 0;
|
||
cie_table.entries = NULL;
|
||
|
||
fde_table.num_entries = 0;
|
||
fde_table.entries = NULL;
|
||
|
||
/* Build a minimal decoding of the DWARF2 compilation unit. */
|
||
unit = (struct comp_unit *) obstack_alloc (&objfile->objfile_obstack,
|
||
sizeof (struct comp_unit));
|
||
unit->abfd = objfile->obfd;
|
||
unit->objfile = objfile;
|
||
unit->dbase = 0;
|
||
unit->tbase = 0;
|
||
|
||
if (objfile->separate_debug_objfile_backlink == NULL)
|
||
{
|
||
/* Do not read .eh_frame from separate file as they must be also
|
||
present in the main file. */
|
||
dwarf2_get_section_info (objfile, DWARF2_EH_FRAME,
|
||
&unit->dwarf_frame_section,
|
||
&unit->dwarf_frame_buffer,
|
||
&unit->dwarf_frame_size);
|
||
if (unit->dwarf_frame_size)
|
||
{
|
||
asection *got, *txt;
|
||
|
||
/* FIXME: kettenis/20030602: This is the DW_EH_PE_datarel base
|
||
that is used for the i386/amd64 target, which currently is
|
||
the only target in GCC that supports/uses the
|
||
DW_EH_PE_datarel encoding. */
|
||
got = bfd_get_section_by_name (unit->abfd, ".got");
|
||
if (got)
|
||
unit->dbase = got->vma;
|
||
|
||
/* GCC emits the DW_EH_PE_textrel encoding type on sh and ia64
|
||
so far. */
|
||
txt = bfd_get_section_by_name (unit->abfd, ".text");
|
||
if (txt)
|
||
unit->tbase = txt->vma;
|
||
|
||
TRY
|
||
{
|
||
frame_ptr = unit->dwarf_frame_buffer;
|
||
while (frame_ptr < unit->dwarf_frame_buffer + unit->dwarf_frame_size)
|
||
frame_ptr = decode_frame_entry (unit, frame_ptr, 1,
|
||
&cie_table, &fde_table,
|
||
EH_CIE_OR_FDE_TYPE_ID);
|
||
}
|
||
|
||
CATCH (e, RETURN_MASK_ERROR)
|
||
{
|
||
warning (_("skipping .eh_frame info of %s: %s"),
|
||
objfile_name (objfile), e.message);
|
||
|
||
if (fde_table.num_entries != 0)
|
||
{
|
||
xfree (fde_table.entries);
|
||
fde_table.entries = NULL;
|
||
fde_table.num_entries = 0;
|
||
}
|
||
/* The cie_table is discarded by the next if. */
|
||
}
|
||
END_CATCH
|
||
|
||
if (cie_table.num_entries != 0)
|
||
{
|
||
/* Reinit cie_table: debug_frame has different CIEs. */
|
||
xfree (cie_table.entries);
|
||
cie_table.num_entries = 0;
|
||
cie_table.entries = NULL;
|
||
}
|
||
}
|
||
}
|
||
|
||
dwarf2_get_section_info (objfile, DWARF2_DEBUG_FRAME,
|
||
&unit->dwarf_frame_section,
|
||
&unit->dwarf_frame_buffer,
|
||
&unit->dwarf_frame_size);
|
||
if (unit->dwarf_frame_size)
|
||
{
|
||
int num_old_fde_entries = fde_table.num_entries;
|
||
|
||
TRY
|
||
{
|
||
frame_ptr = unit->dwarf_frame_buffer;
|
||
while (frame_ptr < unit->dwarf_frame_buffer + unit->dwarf_frame_size)
|
||
frame_ptr = decode_frame_entry (unit, frame_ptr, 0,
|
||
&cie_table, &fde_table,
|
||
EH_CIE_OR_FDE_TYPE_ID);
|
||
}
|
||
CATCH (e, RETURN_MASK_ERROR)
|
||
{
|
||
warning (_("skipping .debug_frame info of %s: %s"),
|
||
objfile_name (objfile), e.message);
|
||
|
||
if (fde_table.num_entries != 0)
|
||
{
|
||
fde_table.num_entries = num_old_fde_entries;
|
||
if (num_old_fde_entries == 0)
|
||
{
|
||
xfree (fde_table.entries);
|
||
fde_table.entries = NULL;
|
||
}
|
||
else
|
||
{
|
||
fde_table.entries = xrealloc (fde_table.entries,
|
||
fde_table.num_entries *
|
||
sizeof (fde_table.entries[0]));
|
||
}
|
||
}
|
||
fde_table.num_entries = num_old_fde_entries;
|
||
/* The cie_table is discarded by the next if. */
|
||
}
|
||
END_CATCH
|
||
}
|
||
|
||
/* Discard the cie_table, it is no longer needed. */
|
||
if (cie_table.num_entries != 0)
|
||
{
|
||
xfree (cie_table.entries);
|
||
cie_table.entries = NULL; /* Paranoia. */
|
||
cie_table.num_entries = 0; /* Paranoia. */
|
||
}
|
||
|
||
/* Copy fde_table to obstack: it is needed at runtime. */
|
||
fde_table2 = (struct dwarf2_fde_table *)
|
||
obstack_alloc (&objfile->objfile_obstack, sizeof (*fde_table2));
|
||
|
||
if (fde_table.num_entries == 0)
|
||
{
|
||
fde_table2->entries = NULL;
|
||
fde_table2->num_entries = 0;
|
||
}
|
||
else
|
||
{
|
||
struct dwarf2_fde *fde_prev = NULL;
|
||
struct dwarf2_fde *first_non_zero_fde = NULL;
|
||
int i;
|
||
|
||
/* Prepare FDE table for lookups. */
|
||
qsort (fde_table.entries, fde_table.num_entries,
|
||
sizeof (fde_table.entries[0]), qsort_fde_cmp);
|
||
|
||
/* Check for leftovers from --gc-sections. The GNU linker sets
|
||
the relevant symbols to zero, but doesn't zero the FDE *end*
|
||
ranges because there's no relocation there. It's (offset,
|
||
length), not (start, end). On targets where address zero is
|
||
just another valid address this can be a problem, since the
|
||
FDEs appear to be non-empty in the output --- we could pick
|
||
out the wrong FDE. To work around this, when overlaps are
|
||
detected, we prefer FDEs that do not start at zero.
|
||
|
||
Start by finding the first FDE with non-zero start. Below
|
||
we'll discard all FDEs that start at zero and overlap this
|
||
one. */
|
||
for (i = 0; i < fde_table.num_entries; i++)
|
||
{
|
||
struct dwarf2_fde *fde = fde_table.entries[i];
|
||
|
||
if (fde->initial_location != 0)
|
||
{
|
||
first_non_zero_fde = fde;
|
||
break;
|
||
}
|
||
}
|
||
|
||
/* Since we'll be doing bsearch, squeeze out identical (except
|
||
for eh_frame_p) fde entries so bsearch result is predictable.
|
||
Also discard leftovers from --gc-sections. */
|
||
fde_table2->num_entries = 0;
|
||
for (i = 0; i < fde_table.num_entries; i++)
|
||
{
|
||
struct dwarf2_fde *fde = fde_table.entries[i];
|
||
|
||
if (fde->initial_location == 0
|
||
&& first_non_zero_fde != NULL
|
||
&& (first_non_zero_fde->initial_location
|
||
< fde->initial_location + fde->address_range))
|
||
continue;
|
||
|
||
if (fde_prev != NULL
|
||
&& fde_prev->initial_location == fde->initial_location)
|
||
continue;
|
||
|
||
obstack_grow (&objfile->objfile_obstack, &fde_table.entries[i],
|
||
sizeof (fde_table.entries[0]));
|
||
++fde_table2->num_entries;
|
||
fde_prev = fde;
|
||
}
|
||
fde_table2->entries = obstack_finish (&objfile->objfile_obstack);
|
||
|
||
/* Discard the original fde_table. */
|
||
xfree (fde_table.entries);
|
||
}
|
||
|
||
set_objfile_data (objfile, dwarf2_frame_objfile_data, fde_table2);
|
||
}
|
||
|
||
/* Provide a prototype to silence -Wmissing-prototypes. */
|
||
void _initialize_dwarf2_frame (void);
|
||
|
||
void
|
||
_initialize_dwarf2_frame (void)
|
||
{
|
||
dwarf2_frame_data = gdbarch_data_register_pre_init (dwarf2_frame_init);
|
||
dwarf2_frame_objfile_data = register_objfile_data ();
|
||
}
|