mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-03 04:12:10 +08:00
25286543da
* Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
352 lines
9.3 KiB
Plaintext
352 lines
9.3 KiB
Plaintext
configdirs="doc testsuite"
|
|
srcname="GDB"
|
|
srctrigger=main.c
|
|
|
|
# per-host:
|
|
|
|
# Map host cpu into the config cpu subdirectory name.
|
|
# The default is $host_cpu.
|
|
|
|
case "${host_cpu}" in
|
|
|
|
c[12]) gdb_host_cpu=convex ;;
|
|
hppa*) gdb_host_cpu=pa ;;
|
|
i[34]86) gdb_host_cpu=i386 ;;
|
|
m68*) gdb_host_cpu=m68k ;;
|
|
np1) gdb_host_cpu=gould ;;
|
|
pyramid) gdb_host_cpu=pyr ;;
|
|
*) gdb_host_cpu=$host_cpu ;;
|
|
|
|
esac
|
|
|
|
# map host info into gdb names.
|
|
|
|
case "${host}" in
|
|
|
|
a29k-*-*) gdb_host=ultra3 ;;
|
|
|
|
alpha-*-osf*) gdb_host=alpha-osf1 ;;
|
|
|
|
arm-*-*) gdb_host=arm ;;
|
|
|
|
c[12]-*-*) gdb_host=convex ;;
|
|
|
|
hppa*-hp-bsd*) gdb_host=hppabsd ;;
|
|
hppa*-hp-hpux*) gdb_host=hppahpux ;;
|
|
|
|
i[34]86-ncr-*) gdb_host=ncr3000 ;;
|
|
i[34]86-sequent-bsd*) gdb_host=symmetry ;; #dynix
|
|
i[34]86-sequent-sysv*) gdb_host=ptx ;;
|
|
|
|
i[34]86-*-aix*) gdb_host=i386aix ;;
|
|
i[34]86-*-bsd*) gdb_host=i386bsd ;;
|
|
i[34]86-*-go32) gdb_host=go32 ;;
|
|
i[34]86-*-linux) gdb_host=linux ;;
|
|
i[34]86-*-lynx*) gdb_host=i386lynx ;;
|
|
i[34]86-*-mach) gdb_host=i386mach ;;
|
|
i[34]86-*-sco3.2v4*) gdb_host=i386sco4 ;;
|
|
i[34]86-*-sco*) gdb_host=i386sco ;;
|
|
i[34]86-*-solaris*) gdb_host=i386sol2 ;;
|
|
i[34]86-*-sunos*) gdb_host=sun386 ;;
|
|
i[34]86-*-sysv3.2) gdb_host=i386v32 ;;
|
|
i[34]86-*-sysv4*) gdb_host=i386v4 ;;
|
|
i[34]86-*-sysv*) gdb_host=i386v ;;
|
|
i[34]86-*-isc*) gdb_host=i386v32 ;;
|
|
|
|
m680[01]0-sun-sunos3*) gdb_host=sun2os3 ;;
|
|
m680[01]0-sun-sunos4*) gdb_host=sun2os4 ;;
|
|
m68030-sony-*) gdb_host=news1000 ;;
|
|
|
|
m68*-altos-*) gdb_host=altos ;;
|
|
m68*-apollo*-sysv*) gdb_host=apollo68v ;;
|
|
m68*-apollo*-bsd*) gdb_host=apollo68b ;;
|
|
m68*-att-*) gdb_host=3b1 ;;
|
|
m68*-bull*-sysv*) gdb_host=dpx2 ;;
|
|
m68*-cbm-sysv4*) gdb_host=amix ;;
|
|
m68*-hp-bsd*) gdb_host=hp300bsd ;;
|
|
m68*-hp-hpux*) gdb_host=hp300hpux ;;
|
|
m68*-isi-*) gdb_host=isi ;;
|
|
m68*-motorola-*) gdb_host=delta68 ;;
|
|
m68*-sony-*) gdb_host=news ;;
|
|
m68*-sun-sunos3*) gdb_host=sun3os3 ;;
|
|
m68*-sun-sunos4*) gdb_host=sun3os4 ;;
|
|
m68*-sun-*) gdb_host=sun3os4 ;;
|
|
|
|
m88k-motorola-*) gdb_host=delta88 ;;
|
|
m88k-*-*) gdb_host=m88k ;;
|
|
|
|
mips-dec-*) gdb_host=decstation ;;
|
|
mips-little-*) gdb_host=littlemips ;;
|
|
mips-sgi-irix3) gdb_host=irix3 ;;
|
|
mips-sgi-irix4*) gdb_host=irix4 ;;
|
|
mips-sony-*) gdb_host=news-mips ;;
|
|
mips-*-sysv*) gdb_host=riscos ;;
|
|
mips-*-riscos*) gdb_host=riscos ;;
|
|
|
|
none-*-*) gdb_host=none ;;
|
|
|
|
np1-*-*) gdb_host=np1 ;;
|
|
|
|
ns32k-umax-*) gdb_host=umax ;;
|
|
ns32k-utek-sysv) gdb_host=merlin ;;
|
|
|
|
pn-*-*) gdb_host=pn ;;
|
|
|
|
pyramid-*-*) gdb_host=pyramid ;;
|
|
|
|
romp-*-*) gdb_host=rtbsd ;;
|
|
|
|
rs6000-*-*) gdb_host=rs6000 ;;
|
|
|
|
sparc-*-solaris2*) gdb_host=sun4sol2 ;;
|
|
sparc-*-sunos4*) gdb_host=sun4os4 ;;
|
|
sparc-*-*) gdb_host=sun4os4 ;;
|
|
|
|
tahoe-*-*) gdb_host=tahoe ;;
|
|
|
|
vax-*-bsd*) gdb_host=vaxbsd ;;
|
|
vax-*-ultrix2*) gdb_host=vaxult2 ;;
|
|
vax-*-ultrix*) gdb_host=vaxult ;;
|
|
|
|
esac
|
|
|
|
|
|
if [ ! -f ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ]; then
|
|
echo '***' "Gdb does not support host ${host}" 1>&2
|
|
exit 1
|
|
fi
|
|
|
|
# We really shouldn't depend on there being a space after XM_FILE= ...
|
|
hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
|
|
|
|
# per-target:
|
|
|
|
# Map target cpu into the config cpu subdirectory name.
|
|
# The default is $target_cpu.
|
|
|
|
case "${target_cpu}" in
|
|
|
|
c[12]) gdb_target_cpu=convex ;;
|
|
hppa*) gdb_target_cpu=pa ;;
|
|
i[34]86) gdb_target_cpu=i386 ;;
|
|
m68*) gdb_target_cpu=m68k ;;
|
|
np1) gdb_target_cpu=gould ;;
|
|
pn) gdb_target_cpu=gould ;;
|
|
pyramid) gdb_target_cpu=pyr ;;
|
|
sparclite) gdb_target_cpu=sparc
|
|
configdirs="${configdirs} sparclite"
|
|
;;
|
|
sparc*) gdb_target_cpu=sparc ;;
|
|
*) gdb_target_cpu=$target_cpu ;;
|
|
|
|
esac
|
|
|
|
# map target info into gdb names.
|
|
|
|
case "${target}" in
|
|
|
|
a29k-*-aout) gdb_target=a29k ;;
|
|
a29k-*-coff) gdb_target=a29k ;;
|
|
a29k-*-elf) gdb_target=a29k ;;
|
|
a29k-*-ebmon) gdb_target=a29k ;;
|
|
a29k-*-kern) gdb_target=a29k-kern ;;
|
|
a29k-*-none) gdb_target=a29k ;;
|
|
a29k-*-sym1) gdb_target=ultra3 ;;
|
|
a29k-*-udi) gdb_target=a29k-udi ;;
|
|
|
|
arm-*-*) gdb_target=arm ;;
|
|
|
|
c1-*-*) gdb_target=convex ;;
|
|
c2-*-*) gdb_target=convex ;;
|
|
|
|
h8300-*-*) gdb_target=h8300hms ;;
|
|
h8300h-*-*) gdb_target=h8300hms gdb_target_cpu=h8300 ;;
|
|
h8500-*-*) gdb_target=h8500hms ;;
|
|
|
|
sh-*-*) gdb_target=sh ;;
|
|
|
|
hppa*-*-bsd*) gdb_target=hppabsd ;;
|
|
hppa*-*-hpux*) gdb_target=hppahpux ;;
|
|
|
|
i[34]86-sequent-*) gdb_target=symmetry ;;
|
|
i[34]86-ncr-*) gdb_target=ncr3000 ;;
|
|
|
|
i[34]86-*-aout) gdb_target=i386aout ;;
|
|
i[34]86-*-coff) gdb_target=i386v ;;
|
|
i[34]86-*-elf) gdb_target=i386v ;;
|
|
|
|
i[34]86-*-aix*) gdb_target=i386aix ;;
|
|
i[34]86-*-bsd*) gdb_target=i386bsd ;;
|
|
i[34]86-*-go32) gdb_target=i386aout ;;
|
|
i[34]86-*-lynx*) gdb_target=i386lynx
|
|
configdirs="${configdirs} gdbserver"
|
|
;;
|
|
i[34]86-*-solaris*) gdb_target=i386sol2 ;;
|
|
i[34]86-*-sunos*) gdb_target=sun386 ;;
|
|
i[34]86-*-sysv4*) gdb_target=i386v4 ;;
|
|
i[34]86-*-sco*) gdb_target=i386v ;;
|
|
i[34]86-*-sysv*) gdb_target=i386v ;;
|
|
i[34]86-*-linux*) gdb_target=linux ;;
|
|
i[34]86-*-isc*) gdb_target=i386v ;;
|
|
i[34]86-*-netware*) gdb_target=i386nw ;;
|
|
|
|
i960-*-bout) gdb_target=vxworks960 ;;
|
|
i960-*-coff) gdb_target=nindy960 ;;
|
|
i960-*-elf) gdb_target=nindy960 ;;
|
|
|
|
i960-*-nindy) gdb_target=nindy960 ;;
|
|
i960-*-vxworks) gdb_target=vxworks960 ;;
|
|
|
|
m68000-*-aout) gdb_target=m68k-nofp ;;
|
|
m68000-*-coff) gdb_target=m68k-nofp ;;
|
|
m68000-*-elf) gdb_target=m68k-nofp ;;
|
|
m68000-*-sunos3*) gdb_target=sun2os3 ;;
|
|
m68000-*-sunos4*) gdb_target=sun2os4 ;;
|
|
|
|
m68*-cbm-sysv4*) gdb_target=amix ;;
|
|
m68*-bull-sysv*) gdb_target=dpx2 ;;
|
|
m68*-hp-bsd*) gdb_target=hp300bsd ;;
|
|
m68*-hp-hpux*) gdb_target=hp300hpux ;;
|
|
|
|
m68*-altos-*) gdb_target=altos ;;
|
|
m68*-att-*) gdb_target=3b1 ;;
|
|
m68*-ericsson-*) gdb_target=es1800 ;;
|
|
m68*-isi-*) gdb_target=isi ;;
|
|
m68*-motorola-*) gdb_target=delta68 ;;
|
|
m68*-netx-*) gdb_target=vxworks68 ;;
|
|
m68*-sony-*) gdb_target=news ;;
|
|
m68*-tandem-*) gdb_target=st2000 ;;
|
|
|
|
m68*-rom68k-*) gdb_target=monitor ;;
|
|
m68*-*bug-*) gdb_target=monitor ;;
|
|
m68*-monitor-*) gdb_target=monitor ;;
|
|
|
|
m68*-*-aout) gdb_target=m68k-fp ;;
|
|
m68*-*-coff) gdb_target=m68k-fp ;;
|
|
m68*-*-elf) gdb_target=m68k-fp ;;
|
|
m68*-*-os68k) gdb_target=os68k ;;
|
|
m68*-*-sunos3*) gdb_target=sun3os3 ;;
|
|
m68*-*-sunos4*) gdb_target=sun3os4 ;;
|
|
m68*-*-vxworks*) gdb_target=vxworks68 ;;
|
|
|
|
m88k-motorola-*) gdb_target=delta88 ;;
|
|
m88k-*-*) gdb_target=m88k ;;
|
|
|
|
mips-big-*) gdb_target=bigmips ;;
|
|
mips-dec-*) gdb_target=decstation ;;
|
|
mips-idt-ecoffl*) gdb_target=idtl ;;
|
|
mips-idt-ecoff*) gdb_target=idt ;;
|
|
mips-little-*) gdb_target=littlemips ;;
|
|
mips-sgi-*) gdb_target=irix3 ;;
|
|
mips-sony-*) gdb_target=bigmips ;;
|
|
mips-*-sysv*) gdb_target=bigmips ;;
|
|
mips-*-riscos*) gdb_target=bigmips ;;
|
|
|
|
none-*-*) gdb_target=none ;;
|
|
|
|
np1-*-*) gdb_target=np1 ;;
|
|
|
|
ns32k-utek-sysv) gdb_target=merlin ;;
|
|
ns32k-utek-*) gdb_target=umax ;;
|
|
|
|
pn-*-*) gdb_target=pn ;;
|
|
|
|
pyramid-*-*) gdb_target=pyramid ;;
|
|
|
|
rs6000-*-*) gdb_target=rs6000 ;;
|
|
|
|
sparc-*-aout) gdb_target=sparc-em ;;
|
|
sparc-*-coff) gdb_target=sparc-em ;;
|
|
sparc-*-elf) gdb_target=sparc-em ;;
|
|
sparc-*-solaris2*) gdb_target=sun4sol2 ;;
|
|
sparc-*-sunos4*) gdb_target=sun4os4 ;;
|
|
sparc-*-vxworks*) gdb_target=vxsparc ;;
|
|
sparc-*-*) gdb_target=sun4os4 ;;
|
|
sparclite*-*-*) gdb_target=sparclite ;;
|
|
# start-sanitize-v9
|
|
sparc64-*-*) gdb_target_cpu=sparc gdb_target=sp64 ;;
|
|
# end-sanitize-v9
|
|
|
|
tahoe-*-*) gdb_target=tahoe ;;
|
|
vax-*-*) gdb_target=vax ;;
|
|
|
|
z8k-*-sim) gdb_target=z8ksim ;;
|
|
esac
|
|
|
|
if [ ! -f ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt ]; then
|
|
echo '***' "Gdb does not support target ${target}" 1>&2
|
|
exit 1
|
|
fi
|
|
|
|
if [ -z "${removing}" ] ; then
|
|
cat ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt | awk '$1 == "#msg" {
|
|
print substr($0,6)}'
|
|
fi
|
|
|
|
# We really shouldn't depend on there being a space after TM_FILE= ...
|
|
targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt`
|
|
|
|
if [ "${target}" = "${host}" ] ; then
|
|
nativefile=`awk '$1 == "NAT_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
|
|
fi
|
|
|
|
host_makefile_frag=config/${gdb_host_cpu}/${gdb_host}.mh
|
|
target_makefile_frag=config/${gdb_target_cpu}/${gdb_target}.mt
|
|
|
|
# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
|
|
# (NAT_FILE) is not set in the ?config/* file, we don't make the
|
|
# corresponding links. But we have to remove the xm.h files and tm.h
|
|
# files anyway, e.g. when switching from "configure host" to
|
|
# "configure none".
|
|
|
|
files=
|
|
links=
|
|
rm -f xm.h
|
|
if [ "${hostfile}" != "" ]; then
|
|
if [ -f ${srcdir}/config/${hostfile} ]; then
|
|
files="${files} config/${hostfile}"
|
|
else
|
|
files="${files} config/${gdb_host_cpu}/${hostfile}"
|
|
fi
|
|
links="${links} xm.h"
|
|
fi
|
|
rm -f tm.h
|
|
if [ "${targetfile}" != "" ]; then
|
|
if [ -f ${srcdir}/config/${targetfile} ]; then
|
|
files="${files} config/${targetfile}"
|
|
else
|
|
files="${files} config/${gdb_target_cpu}/${targetfile}"
|
|
fi
|
|
links="${links} tm.h"
|
|
fi
|
|
rm -f nm.h
|
|
if [ "${nativefile}" != "" ]; then
|
|
if [ -f ${srcdir}/config/${nativefile} ]; then
|
|
files="${files} config/${nativefile}"
|
|
else
|
|
files="${files} config/${gdb_host_cpu}/${nativefile}"
|
|
fi
|
|
links="${links} nm.h"
|
|
# temporary scaffolding until all hosts have the host/target/native
|
|
# split in place.
|
|
else
|
|
files="${files} config/nm-trash.h"
|
|
links="${links} nm.h"
|
|
fi
|
|
|
|
# post-target:
|
|
|
|
case ${srcdir} in
|
|
.)
|
|
;;
|
|
*)
|
|
grep "source ${srcdir}/.gdbinit" .gdbinit >/dev/null 2>/dev/null || \
|
|
echo "source ${srcdir}/.gdbinit" >> .gdbinit
|
|
esac
|
|
|
|
if [ "${nativefile}" = "" ] ; then
|
|
sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
|
|
< Makefile > Makefile.tem
|
|
mv -f Makefile.tem Makefile
|
|
fi
|