binutils-gdb/gdb
1992-09-15 07:28:05 +00:00
..
29k-share * vx-share/README, nindy-share/README: New files describing 1992-08-28 20:16:45 +00:00
Attic Initial revision 1991-04-11 03:07:16 +00:00
config Switch to ser-bsd.c. 1992-09-08 23:06:06 +00:00
doc Fix typos and thinkos reported by Sun Ming (and one reported by John). 1992-09-14 18:53:57 +00:00
vx-share Update .sanitize files 1992-09-02 09:24:34 +00:00
.gdbinit These files are replaced by the mmalloc library. 1992-03-15 01:13:26 +00:00
.Sanitize * a68v-xdep.c (store_inferior_registers): Define as type void. 1992-09-03 16:26:03 +00:00
a68v-xdep.c * a68v-xdep.c (store_inferior_registers): declare as void. 1992-09-08 22:46:08 +00:00
alldeps.mak * alldeps.mak, depend: Update. 1992-07-14 23:04:58 +00:00
alloca.c Motorola 88000 port without tears, I mean without tdescs. 1991-11-14 01:01:28 +00:00
altos-xdep.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
am29k-opcode.h Fix decoding of mtacc, dmac, fmac. These files should really get merged 1991-11-08 01:50:51 +00:00
am29k-pinsn.c * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
am29k-tdep.c Changes to make MIPS x 29K compile. 1992-08-11 09:54:24 +00:00
ansidecl.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
arm-convert.s Johns release 1991-03-28 16:28:29 +00:00
arm-opcode.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
arm-pinsn.c Remove reg_names decl (now in defs.h). 1992-06-13 06:08:09 +00:00
arm-tdep.c Initial revision 1991-03-28 16:26:26 +00:00
arm-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
blockframe.c Remove tdesc stuff. Remove FRAME_CHAIN_COMBINE from all tm-*.h files, 1991-11-18 23:52:12 +00:00
breakpoint.c * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c, 1992-09-15 06:27:18 +00:00
breakpoint.h * infrun.c, infcmd.c, breakpoint.c, main.c, symfile.c, 1992-02-22 09:06:58 +00:00
buildsym.c RS/6000 portability changes (for hosting cross-debuggers). 1992-08-29 00:32:58 +00:00
buildsym.h * buildsym.c (start_subfile): Compact dirname initialization. 1992-08-06 19:59:46 +00:00
c-exp.y Removed a large number of changes inserted by Per Bothner 1992-09-10 00:07:06 +00:00
cadillac-patches Update Cadillac patch kit. 1992-06-27 19:41:24 +00:00
cadillac.c * sparc-pinsn.c: Use <string.h> rather than "string.h", for 1992-06-27 19:16:47 +00:00
call-cmds.h * Makefile.in (VERSION): Roll to 4.4.7. 1992-03-29 23:18:31 +00:00
ChangeLog * energize.c (pty_to_kernel): Must check for EAGAIN as 1992-09-15 07:12:52 +00:00
ChangeLog-3.x Initial revision 1991-03-28 16:26:26 +00:00
ChangeLog-9091 Split ChangeLog out at Jan 1, 1992. 1992-01-27 20:32:19 +00:00
coffread.c * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
command.c * command.c (lookup_cmd_1): Clarify descriptive comments. 1992-07-10 17:22:35 +00:00
command.h Initial revision 1991-03-28 16:26:26 +00:00
config.gdb Reverse entropy. Inhale bit rot, exahle graceful compilation. 1991-06-07 07:45:16 +00:00
config.status Johns release 1991-03-28 16:28:29 +00:00
config.sub steves h8 patches 1991-10-02 04:01:08 +00:00
configure resync 1991-10-02 04:15:56 +00:00
configure.in * a68v-xdep.c (store_inferior_registers): Define as type void. 1992-09-03 16:26:03 +00:00
convex-opcode.h Johns release 1991-03-28 16:28:29 +00:00
convex-pinsn.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
convex-tdep.c Remove now obsolete signame.c and signame.h; functionality is handled by 1992-04-22 16:46:47 +00:00
convex-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
Convex.notes Johns release 1991-03-28 16:28:29 +00:00
convx-opcode.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
COPYING Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
copying.awk Initial revision 1991-03-28 16:26:26 +00:00
copying.c *** empty log message *** 1991-04-26 23:09:52 +00:00
core.c * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c, 1992-09-15 06:27:18 +00:00
coredep.c * coredep.c (fetch_core_registers): Remove premature warning, 1992-05-20 08:25:56 +00:00
cplus-dem.c * cplus-dem.c: Reorder args to most local functions to make them 1992-08-26 23:05:55 +00:00
createtags Johns release 1991-03-28 16:28:29 +00:00
dbxread.c * buildsym.c (start_subfile): Compact dirname initialization. 1992-08-06 19:59:46 +00:00
defs.h * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c, 1992-09-15 06:27:18 +00:00
demangle.c * a68v-xdep.c (store_inferior_registers): Define as type void. 1992-09-03 16:26:03 +00:00
demangle.h * cplus-dem.c (cplus_markers): Add table for gnu style and 1992-08-14 19:14:15 +00:00
depend * cplus-dem.c, demangle.h: Moved to ../libiberty and ../include, 1992-08-31 01:23:24 +00:00
dwarfread.c * dwarfread.c (cu_language): New local variable to record 1992-08-31 20:50:45 +00:00
ecoff.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
elfread.c * Makefile.in (VERSION): Bump to 4.6.2. 1992-07-28 04:22:18 +00:00
energize-patches All new patches for Energize! 1992-09-15 07:28:05 +00:00
energize.c * energize.c (pty_to_kernel): Must check for EAGAIN as 1992-09-15 07:12:52 +00:00
energize.h * cadillac.c, cadillac-patches: Rename to energize.c and 1992-07-05 17:06:47 +00:00
environ.c * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c, 1992-06-29 23:34:38 +00:00
environ.h Initial revision 1991-03-28 16:26:26 +00:00
eval.c A ton of changes to improve C++ debugging. See ChangeLog. 1992-09-04 07:37:18 +00:00
exec.c * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c, 1992-09-15 06:27:18 +00:00
expprint.c A ton of changes to improve C++ debugging. See ChangeLog. 1992-09-04 07:37:18 +00:00
expread.tab.c Remove config.gdb. Restore alldeps.mak, depend, and expread.tab.c 1991-07-31 04:15:12 +00:00
expread.y lint 1991-08-22 21:04:25 +00:00
expression.h A ton of changes to improve C++ debugging. See ChangeLog. 1992-09-04 07:37:18 +00:00
findvar.c * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c, 1992-06-29 23:34:38 +00:00
frame.h Initial revision 1991-03-28 16:26:26 +00:00
gcc.patch Various fixes to improve C++ debugging. See ChangeLog. 1992-07-10 03:56:17 +00:00
gdb-int.texinfo Initial revision 1991-03-28 16:26:26 +00:00
gdb-stabs.h Relocate symbols using an array of section_offsets, rather than a 1992-07-04 13:59:03 +00:00
gdbcmd.h * maint.c: New file. 1992-07-06 00:22:57 +00:00
gdbcore.h The list of changes is too long to fit in the cvs log (since it truncates!). 1991-05-02 04:28:42 +00:00
gdbtypes.c Removed a large number of changes inserted by Per Bothner 1992-09-10 00:07:06 +00:00
gdbtypes.h Removed a large number of changes inserted by Per Bothner 1992-09-10 00:07:06 +00:00
getpagesize.h Johns release 1991-03-28 16:28:29 +00:00
gmalloc.c * Check in Fred Fish's changes in these modules. Fred 1992-02-22 01:46:16 +00:00
gmalloc.h * Check in Fred Fish's changes in these modules. Fred 1992-02-22 01:46:16 +00:00
go32-xdep.c Changes to support GDB running on DOS using GO32 and H8 support 1992-05-13 01:12:18 +00:00
gould-pinsn.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
gould-xdep.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
h8300-tdep.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
hds-tdep.c Stubs to get things going 1992-01-16 23:52:05 +00:00
hp300hpux-xdep.c Johns release 1991-03-28 16:28:29 +00:00
hp300ux-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
hppa-coredep.c * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
hppa-pinsn.c * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
hppabsd-core.c * dbxread.c (dbx_symfile_init): Move more code under hp9000s800 1992-06-25 23:02:57 +00:00
hppabsd-tdep.c * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
hppabsd-xdep.c * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
hppahpux-tdep.c * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
hppahpux-xdep.c Avoid PT_WDUSER because it crashes H-PUX. 1992-06-27 02:28:05 +00:00
i386-pinsn.c * dwarfread.c (struct dieinfo): Add has_at_byte_size. 1992-08-09 06:14:59 +00:00
i386-tdep.c * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c, 1992-06-29 23:34:38 +00:00
i386-xdep.c A ton of changes to improve C++ debugging. See ChangeLog. 1992-09-04 07:37:18 +00:00
i387-tdep.c Globs of changes. See the ChangeLog for details. Most related to 1992-03-15 01:09:14 +00:00
i860-break.h Update cygnus copies of currently undistributed i860 files maintained by 1992-07-31 23:17:54 +00:00
i860-opcode.h Update cygnus copies of currently undistributed i860 files maintained by 1992-07-31 23:17:54 +00:00
i860-pinsn.c Update cygnus copies of currently undistributed i860 files maintained by 1992-07-31 23:17:54 +00:00
i860-tdep.c * breakpoint.c (breakpoint_re_set): Select a default source 1992-08-23 18:09:19 +00:00
i960-pinsn.c * ser-termios.c, ser-go32.c: Remove DEFUN crap, clean up. 1992-09-02 08:51:17 +00:00
i960-tdep.c Use frame address if arg pointer isn't available. 1992-07-14 22:07:47 +00:00
ieee-float.c * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
ieee-float.h * defs.h: Include ansidecl.h and PARAMS macro. Use PARAMS 1992-02-20 19:23:42 +00:00
infcmd.c * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
inferior.h Many changes to procfs.c, mostly to expand the "info proc" command and to 1992-04-01 19:46:14 +00:00
inflow.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
infptrace.c * a68v-xdep.c (store_inferior_registers): declare as void. 1992-09-08 22:46:08 +00:00
infrun.c * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c, 1992-06-29 23:34:38 +00:00
infrun.hacked.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
inftarg.c The list of changes is too long to fit in the cvs log (since it truncates!). 1991-05-02 04:28:42 +00:00
kdb-start.c * defs.h: Incorporate param.h. All users changed. 1991-11-21 18:42:05 +00:00
language.c * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c, 1992-09-15 06:27:18 +00:00
language.h * target.c (nomemory): Now that higher levels examine errno, give EIO. 1992-03-29 23:14:34 +00:00
m2-exp.y Minor changes to make these work with bison again. 1992-07-09 11:47:50 +00:00
m68k-opcode.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
m68k-pinsn.c This is for PR 628. 1992-08-19 18:28:48 +00:00
m68k-stub.c Initial revision 1991-04-11 11:23:14 +00:00
m68k-tdep.c Add generic m68k function prologue skipping support and expand the 1991-11-19 01:54:52 +00:00
m88k-opcode.h Make it run on wingnut (88k, DGUX). Complete list of changes in the ChangeLog. 1991-05-03 06:02:03 +00:00
m88k-pinsn.c 88K changes inspired by Ted Lemon (uunet!lupine!mellon) 1992-05-20 06:03:50 +00:00
m88k-tdep.c Many changes, most related to creating entry point information on a per-objfile 1992-03-21 01:56:01 +00:00
m88k-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
mach386-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
main.c * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c, 1992-09-15 06:27:18 +00:00
maint.c * command.c (lookup_cmd_1): Clarify descriptive comments. 1992-07-10 17:22:35 +00:00
Makefile * Makefile.dist: put gdb.dvi stuff (updated to use M4 preprocessor 1991-05-14 23:34:41 +00:00
Makefile.dist Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
Makefile.in nindy bug fixes (function types) and opcode library inclusion 1992-09-08 22:33:31 +00:00
Makefile.in-29k-UDI Save Makefile with 29k stuff for later. 1992-06-16 21:56:24 +00:00
Makefile.sdir Initial revision 1991-04-22 20:36:28 +00:00
Makefile.srcdir Johns release 1991-03-28 16:28:29 +00:00
mcheck.c * Check in Fred Fish's changes in these modules. Fred 1992-02-22 01:46:16 +00:00
mem-break.c * defs.h: Incorporate param.h. All users changed. 1991-11-21 18:42:05 +00:00
minimon.h Add new files for 29K and Ultracomputer support. 1991-09-13 01:07:53 +00:00
minsyms.c * buildsym.h: Add processing_acc_compilation flag. 1992-06-13 02:18:44 +00:00
mips-opcode.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
mips-pinsn.c Remove reg_names decl (now in defs.h). 1992-06-13 06:08:09 +00:00
mips-tdep.c * buildsym.c (scan_file_globals): Beware the null file. 1992-06-30 08:53:28 +00:00
mips-xdep.c * mips-xdep.c (REGISTER_PTRACE_ADDR, fetch_inferior_registers, 1992-09-11 09:08:28 +00:00
mipsread.c * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
mmap-alloc.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
mmap-sbrk.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
mtrace.awk Initial revision 1991-04-05 09:01:15 +00:00
mtrace.c Mostly MIPS symbol-reading and general symbol-reading fixups. 1991-07-21 13:02:48 +00:00
munch * configure.in, dbxread.c, hppa-coredep.c, hppa-pinsn.c, 1992-06-19 22:43:49 +00:00
NEWS * WHATS.NEW renamed to NEWS. 1992-07-16 18:41:46 +00:00
news-xdep.c Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
nindy-tdep.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
np1-opcode.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
ns32k-opcode.h Another bugfix (NS32K_SVC_IMMED_OPERANDS) from Rune Nerg}rd. 1991-07-24 13:46:54 +00:00
ns32k-pinsn.c Remove reg_names decl (now in defs.h). 1992-06-13 06:08:09 +00:00
objfiles.c * Makefile.in (VERSION): Bump to 4.6.3. 1992-08-11 05:29:41 +00:00
objfiles.h * dbxread.c (dbx_symfile_init): Init stab_section_info to NULL to 1992-07-08 08:00:30 +00:00
obstack.c Johns release 1991-03-28 16:28:29 +00:00
obstack.h Johns release 1991-03-28 16:28:29 +00:00
os68k-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
param-no-tm.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
param.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
parse.c Removed a large number of changes inserted by Per Bothner 1992-09-10 00:07:06 +00:00
parser-defs.h * Check in Fred Fish's changes in these modules. Fred 1992-02-22 01:46:16 +00:00
partial-stab.h * Makefile.in (OTHERS): Add gcc.patch. 1992-07-16 20:40:36 +00:00
pn-opcode.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
printcmd.c * printcmd.c (output_command): Thinko. 1992-06-25 10:58:53 +00:00
procfs.c * procfs.c (proc_wait): Call print_sys_errmsg() if we get an 1992-09-15 06:42:19 +00:00
Projects * Projects: Patching executables is done. 1992-01-31 22:16:45 +00:00
putenv.c * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
pyr-opcode.h Johns release 1991-03-28 16:28:29 +00:00
pyr-pinsn.c Remove reg_names decl (now in defs.h). 1992-06-13 06:08:09 +00:00
pyr-tdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
pyr-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
README Update for gdb-4.4 release. 1992-02-01 01:44:31 +00:00
regex.c * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c, 1992-06-29 23:34:38 +00:00
regex.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
rem-m68k.shar Initial revision 1991-04-05 09:01:15 +00:00
rem-multi.shar Remove internal gdb definition of fixed arg count concat() function and 1991-11-12 17:50:14 +00:00
remote-adapt.c * remote-adapt.c, remote-eb.c, remote-mm.c: Lint. Fix 1992-06-20 03:42:14 +00:00
remote-eb.c * remote-adapt.c, remote-eb.c, remote-mm.c: Lint. Fix 1992-06-20 03:42:14 +00:00
remote-es1800.c Support OSE. 1992-07-23 18:57:29 +00:00
remote-hms.c * ser-termios.c, ser-go32.c: Remove DEFUN crap, clean up. 1992-09-02 08:51:17 +00:00
remote-mm.c * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
remote-multi.shar Johns release 1991-03-28 16:28:29 +00:00
remote-nindy.c * i386-stub.c, sparc-stub.c (getpacket): Actually check checksums. 1992-09-10 19:18:05 +00:00
remote-sa.m68k.shar Initial revision 1991-03-28 16:26:26 +00:00
remote-sa.sparc.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
remote-st2000.c * serial.h: Fix prototye for serial_raw(). 1992-09-09 04:09:56 +00:00
remote-udi.c Update comments. It doesn't do MiniMON, it does UDI! 1992-08-05 17:49:48 +00:00
remote-vx.68.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
remote-vx.c from p3: remote-vx.c: hide name realloc for inclusion of rpc/rpc.h 1992-09-10 19:56:45 +00:00
remote.c * sparc-stub.c: New file. Mix it with your SPARClite 1992-08-15 09:34:25 +00:00
rs6k-opcode.def Forgot opcode files. 1991-11-13 04:00:22 +00:00
rs6k-opcode.h Mostly rs6000 changes from IBM. 1992-02-29 06:03:43 +00:00
rs6000-pinsn.c * rs6000-pinsn.c: New version from IBM (Metin). 1992-04-17 01:35:42 +00:00
rs6000-tdep.c Minor bug fixes from last big checkin. 1992-08-29 04:22:31 +00:00
rs6000-xdep.c RS/6000 portability changes (for hosting cross-debuggers). 1992-08-29 00:32:58 +00:00
saber.suppress Lint 1992-03-29 23:26:47 +00:00
ser-bsd.c * serial.h: Fix prototye for serial_raw(). 1992-09-09 04:09:56 +00:00
ser-go32.c * ser-termios.c, ser-go32.c: Remove DEFUN crap, clean up. 1992-09-02 08:51:17 +00:00
ser-termios.c * serial.h: Fix prototye for serial_raw(). 1992-09-09 04:09:56 +00:00
serial.h * serial.h: Fix prototye for serial_raw(). 1992-09-09 04:09:56 +00:00
signals.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
signame.c Minor changes for Solaris. 1992-04-09 09:30:45 +00:00
signame.h * config.sub configure.in config/.Sanitize config/mh-irix4 1992-03-05 20:20:27 +00:00
solib.c * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c, 1992-06-29 23:34:38 +00:00
solib.h * solib.h, infrun.c, tm-rs6000.h: Add a PID parameter 1992-03-12 20:18:54 +00:00
source.c (find_source_lines): Handle large st_size fields. 1992-06-21 03:09:18 +00:00
sparc-opcode.h * sparc-opcode.h (trap opcodes): Avoid leading spaces or 1991-06-25 06:50:31 +00:00
sparc-pinsn.c * sparc-pinsn.c: Use <string.h> rather than "string.h", for 1992-06-27 19:16:47 +00:00
sparc-stub.c * i386-stub.c, sparc-stub.c (getpacket): Actually check checksums. 1992-09-10 19:18:05 +00:00
sparc-tdep.c * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c, 1992-06-29 23:34:38 +00:00
sparc-xdep.c * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
stab.def Johns release 1991-03-28 16:28:29 +00:00
stabsread.c Removed a large number of changes inserted by Per Bothner 1992-09-10 00:07:06 +00:00
stabsread.h * Makefile.in (VERSION): Bump to 4.6.2. 1992-07-28 04:22:18 +00:00
stack.c * xm-mips.h (KERNEL_U_ADDR): Get from <machine/param.h>. 1992-09-11 09:11:11 +00:00
standalone.c * tm-sparc.h, tm-sysv4.h, solib.h: Move shared lib definitions 1992-02-21 03:35:37 +00:00
state.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
state.h * Check in Fred Fish's changes in these modules. Fred 1992-02-22 01:46:16 +00:00
stddef.h * stddef.h (size_t): Let either _SIZE_T or _SIZE_T_ guard it. 1991-04-20 03:25:09 +00:00
stdlib.h Johns release 1991-03-28 16:28:29 +00:00
stuff.c Remove now obsolete signame.c and signame.h; functionality is handled by 1992-04-22 16:46:47 +00:00
sun3-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
sun386-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
symfile.c * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c, 1992-09-15 06:27:18 +00:00
symfile.h * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, 1992-03-19 21:57:15 +00:00
symm-tdep.c Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) 1992-03-03 23:26:26 +00:00
symm-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
symmetry-tdep.c Johns release 1991-03-28 16:28:29 +00:00
symmetry-xdep.c Johns release 1991-03-28 16:28:29 +00:00
symmisc.c Relocate symbols using an array of section_offsets, rather than a 1992-07-04 13:59:03 +00:00
symtab.c Removed a large number of changes inserted by Per Bothner 1992-09-10 00:07:06 +00:00
symtab.h A ton of changes to improve C++ debugging. See ChangeLog. 1992-09-04 07:37:18 +00:00
tahoe-opcode.h Initial revision 1991-04-29 05:28:45 +00:00
tahoe-pinsn.c Remove reg_names decl (now in defs.h). 1992-06-13 06:08:09 +00:00
target.c * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c, 1992-09-15 06:27:18 +00:00
target.h * environ.h, expression.h, frame.h, gdbcmd.h, gdbcore.h, 1992-02-21 01:31:56 +00:00
tdesc.c Motorola 88000 port without tears, I mean without tdescs. 1991-11-14 01:01:28 +00:00
tdesc.h Johns release 1991-03-28 16:28:29 +00:00
terminal.h Initial revision 1991-03-28 16:26:26 +00:00
tm-3b1.h * tm-*.h: Remove READ_DBX_FORMAT, COFF_FORMAT, and 1991-11-07 13:14:59 +00:00
tm-29k.h Changes to make MIPS x 29K compile. 1992-08-11 09:54:24 +00:00
tm-68k-noun.h * configure.in (*-*-sunos*): Use trailing * to match all 1992-09-02 08:03:42 +00:00
tm-68k-un.h * configure.in (*-*-sunos*): Use trailing * to match all 1992-09-02 08:03:42 +00:00
tm-68k.h COFF changes for dealing better with EPI 29K C compiler output. 1992-06-21 02:20:30 +00:00
tm-altos.h Add generic m68k function prologue skipping support and expand the 1991-11-19 01:54:52 +00:00
tm-altosgas.h * tm-*.h: Remove READ_DBX_FORMAT, COFF_FORMAT, and 1991-11-07 13:14:59 +00:00
tm-amix.h * defs.h, utils.c: xrealloc takes PTR as first arg. 1992-03-04 20:50:10 +00:00
tm-arm.h Remove tdesc stuff. Remove FRAME_CHAIN_COMBINE from all tm-*.h files, 1991-11-18 23:52:12 +00:00
tm-bigmips.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
tm-convex.h Many changes, most related to creating entry point information on a per-objfile 1992-03-21 01:56:01 +00:00
tm-delta88.h Remove tdesc stuff. Remove FRAME_CHAIN_COMBINE from all tm-*.h files, 1991-11-18 23:52:12 +00:00
tm-es1800.h * tm-vx68.h, tm-es1800.h: Use tm-68k.h rather than tm-sun3.h. 1992-09-02 20:50:31 +00:00
tm-h8300.h Changes to support GDB running on DOS using GO32 and H8 support 1992-05-13 01:12:18 +00:00
tm-hp300bsd.h * tm-*.h: Remove READ_DBX_FORMAT, COFF_FORMAT, and 1991-11-07 13:14:59 +00:00
tm-hp300hpux.h * defs.h: Incorporate param.h. All users changed. 1991-11-21 18:42:05 +00:00
tm-hppa.h * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
tm-hppabsd.h * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
tm-hppahpux.h * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
tm-i386v4.h * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c, 1992-06-29 23:34:38 +00:00
tm-i386v-g.h * tm-*.h: Remove READ_DBX_FORMAT, COFF_FORMAT, and 1991-11-07 13:14:59 +00:00
tm-i386v.h * breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c, 1992-07-04 03:22:08 +00:00
tm-i860.h * breakpoint.c (breakpoint_re_set): Select a default source 1992-08-23 18:09:19 +00:00
tm-i960.h Fixed some bugs in handling vxworks960 -- not reading registers right, 1992-07-09 23:40:01 +00:00
tm-irix3.h * tm-irix3.h: Re-define CPLUS_MARKER to '.'. 1992-05-06 21:37:51 +00:00
tm-isi.h Add generic m68k function prologue skipping support and expand the 1991-11-19 01:54:52 +00:00
tm-linux.h * infrun.c (wait_for_inferior): Don't test for SIGEMT 1992-06-23 00:25:11 +00:00
tm-m88k.h Small changes from Solaris port. The big stuff is not all working yet. 1992-06-11 08:43:29 +00:00
tm-merlin.h Many changes, most related to creating entry point information on a per-objfile 1992-03-21 01:56:01 +00:00
tm-mips.h Bug fixes from Andrew Heybey <ath@lcs.mit.edu>. 1992-08-23 05:36:09 +00:00
tm-news.h * tm-*.h: Remove READ_DBX_FORMAT, COFF_FORMAT, and 1991-11-07 13:14:59 +00:00
tm-nindy960.h Remove tdesc stuff. Remove FRAME_CHAIN_COMBINE from all tm-*.h files, 1991-11-18 23:52:12 +00:00
tm-np1.h Remove tdesc stuff. Remove FRAME_CHAIN_COMBINE from all tm-*.h files, 1991-11-18 23:52:12 +00:00
tm-os68k.h Added support for hosting on an Apollo Series 400 processor (under 1992-02-10 23:30:35 +00:00
tm-pn.h Remove tdesc stuff. Remove FRAME_CHAIN_COMBINE from all tm-*.h files, 1991-11-18 23:52:12 +00:00
tm-pyr.h Many changes, most related to creating entry point information on a per-objfile 1992-03-21 01:56:01 +00:00
tm-rs6000.h Minor bug fixes from last big checkin. 1992-08-29 04:22:31 +00:00
tm-sparc.h * configure.in (*-*-sunos*): Use trailing * to match all 1992-09-02 08:03:42 +00:00
tm-spc-noun.h * configure.in (*-*-sunos*): Use trailing * to match all 1992-09-02 08:03:42 +00:00
tm-spc-un.h * configure.in (*-*-sunos*): Use trailing * to match all 1992-09-02 08:03:42 +00:00
tm-st2000.h * depend: rebuild to account for remote-st2000.c. 1992-06-09 23:31:53 +00:00
tm-stratus.h * dwarfread.c (struct dieinfo): Remove obsolete at_visibility, 1992-08-01 20:40:59 +00:00
tm-sun2.h * configure.in (*-*-sunos*): Use trailing * to match all 1992-09-02 08:03:42 +00:00
tm-sun2os4.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
tm-sun3.h * tm-vx68.h, tm-es1800.h: Use tm-68k.h rather than tm-sun3.h. 1992-09-02 20:50:31 +00:00
tm-sun3os4.h * tm-vx68.h, tm-es1800.h: Use tm-68k.h rather than tm-sun3.h. 1992-09-02 20:50:31 +00:00
tm-sun4os4.h Lint. 1992-04-02 10:35:19 +00:00
tm-sun4os5.h Lint. 1992-04-02 10:35:19 +00:00
tm-sun4sol2.h * buildsym.c (finish_block): Fix thinko `inner block' complaints. 1992-07-05 10:26:53 +00:00
tm-sun386.h Many changes, most related to creating entry point information on a per-objfile 1992-03-21 01:56:01 +00:00
tm-sunos.h * configure.in (*-*-sunos*): Use trailing * to match all 1992-09-02 08:03:42 +00:00
tm-svr4.h Numerous small changes and a complete reorganization of solib.c, to support 1991-12-16 20:57:28 +00:00
tm-symmetry.h Many changes, most related to creating entry point information on a per-objfile 1992-03-21 01:56:01 +00:00
tm-sysv4.h SVR4 names don't have underscores, according to the ABI. 1992-07-05 11:29:16 +00:00
tm-tahoe.h * xm-mips.h (KERNEL_U_ADDR): Get from <machine/param.h>. 1992-09-11 09:11:11 +00:00
tm-ultra3.h IN_SIGTRAMP bugfix. 1991-09-25 01:09:15 +00:00
tm-umax.h 88K changes inspired by Ted Lemon (uunet!lupine!mellon) 1992-05-20 06:03:50 +00:00
tm-vax.h Many changes, most related to creating entry point information on a per-objfile 1992-03-21 01:56:01 +00:00
tm-vx68.h * tm-vx68.h, tm-es1800.h: Use tm-68k.h rather than tm-sun3.h. 1992-09-02 20:50:31 +00:00
tm-vx960.h Fixed some bugs in handling vxworks960 -- not reading registers right, 1992-07-09 23:54:02 +00:00
tm-vxworks68.h Johns release 1991-03-28 16:28:29 +00:00
tm-vxworks960.h Johns release 1991-03-28 16:28:29 +00:00
TODO Update for 4.3. 1991-12-07 15:52:36 +00:00
ultra3-xdep.c * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
umax-xdep.c Remove now obsolete signame.c and signame.h; functionality is handled by 1992-04-22 16:46:47 +00:00
utils.c * breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c, 1992-09-15 06:27:18 +00:00
valarith.c * dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c, 1992-06-29 23:34:38 +00:00
valops.c Removed a large number of changes inserted by Per Bothner 1992-09-10 00:07:06 +00:00
valprint.c Removed a large number of changes inserted by Per Bothner 1992-09-10 00:07:06 +00:00
value.h A ton of changes to improve C++ debugging. See ChangeLog. 1992-09-04 07:37:18 +00:00
values.c Removed a large number of changes inserted by Per Bothner 1992-09-10 00:07:06 +00:00
vax-opcode.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
vax-pinsn.c Remove reg_names decl (now in defs.h). 1992-06-13 06:08:09 +00:00
WHATS.NEW * Makefile.in, demangle.c: Change default demangling style to 1992-07-15 02:30:30 +00:00
xcoffexec.c RS/6000 portability changes (for hosting cross-debuggers). 1992-08-29 00:32:58 +00:00
xcoffread.c * i386-stub.c, sparc-stub.c (getpacket): Actually check checksums. 1992-09-10 19:18:05 +00:00
xcoffsolib.c * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
xcoffsolib.h * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
xm-3b1.h * main.c: Use getcwd rather than getwd. 1991-11-22 01:29:29 +00:00
xm-altos.h * main.c: Use getcwd rather than getwd. 1991-11-22 01:29:29 +00:00
xm-amix.h Globs of changes. See the ChangeLog for details. Most related to 1992-03-15 01:09:14 +00:00
xm-apollo68b.h * a68v-xdep.c (store_inferior_registers): declare as void. 1992-09-08 22:46:08 +00:00
xm-apollo68v.h Remove now obsolete signame.c and signame.h; functionality is handled by 1992-04-22 16:46:47 +00:00
xm-arm.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
xm-bigmips.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
xm-convex.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-delta88.h * tm-vx68.h, tm-es1800.h: Use tm-68k.h rather than tm-sun3.h. 1992-09-02 20:50:31 +00:00
xm-go32.h * xm-go32.h: Define LSEEK_NOT_LINEAR 1992-08-07 18:22:54 +00:00
xm-hp300bsd.h * xm-hp300bsd.h: Add decl for strdup(). 1992-07-14 07:35:48 +00:00
xm-hp300hpux.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
xm-hppabsd.h * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
xm-hppahpux.h * tm-hppa.h: New file, architectural definition of HP PA. 1992-06-25 11:15:47 +00:00
xm-i386mach.h * xm-i386mach.h: add decls for errno and strdup(). 1992-04-08 05:37:32 +00:00
xm-i386sco.h * infrun.c, xm-i386sco.h: SCO needs to use setpgid().CVS: 1992-01-31 01:24:34 +00:00
xm-i386v4.h Globs of changes. See the ChangeLog for details. Most related to 1992-03-15 01:09:14 +00:00
xm-i386v32.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
xm-i386v.h * environ.h, expression.h, frame.h, gdbcmd.h, gdbcore.h, 1992-02-21 01:31:56 +00:00
xm-i860.h Update cygnus copies of currently undistributed i860 files maintained by 1992-07-31 23:17:54 +00:00
xm-irix3.h * tm-{irix3,mips,nindy960,pn,symmetry,vx960}.h: Move 1991-10-12 07:11:48 +00:00
xm-irix4.h Many changes to procfs.c, mostly to expand the "info proc" command and to 1992-04-01 19:46:14 +00:00
xm-isi.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-linux.h #define PSIGNAL_IN_SIGNAL_H. 1992-07-12 08:09:14 +00:00
xm-m68k.h New files for DWARF debugging format support, ELF object file support, SVR4 1991-10-24 11:28:54 +00:00
xm-m88k.h Remove tdesc stuff. Remove FRAME_CHAIN_COMBINE from all tm-*.h files, 1991-11-18 23:52:12 +00:00
xm-merlin.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-mips.h * xm-mips.h (KERNEL_U_ADDR): Get from <machine/param.h>. 1992-09-11 09:11:11 +00:00
xm-news1000.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
xm-news.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-np1.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-pn.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-pyr.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-rs6000.h * config/rs6000.mh (MH_CFLAGS): Circumvent IBM <rpc/rpc.h> bug, 1992-09-03 00:55:04 +00:00
xm-rtbsd.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-sparc.h * environ.h, expression.h, frame.h, gdbcmd.h, gdbcore.h, 1992-02-21 01:31:56 +00:00
xm-stratus.h * dwarfread.c (struct dieinfo): Remove obsolete at_visibility, 1992-08-01 20:40:59 +00:00
xm-sun2.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
xm-sun3.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
xm-sun3os4.h * xcoffexec.c: Remove ' from comment. 1992-06-17 20:15:03 +00:00
xm-sun4os4.h * Makefile.in (VERSION): Bump to 4.5.6. 1992-06-24 04:49:48 +00:00
xm-sun4os5.h Minor changes for Solaris. 1992-04-09 09:30:45 +00:00
xm-sun4sol2.h Fixup PRSVADDR problem as per Johns suggestions. 1992-06-26 03:49:00 +00:00
xm-sun386.h Change GDB over to GNU General Public License version 2. 1991-06-04 07:31:55 +00:00
xm-svr4.h New files for DWARF debugging format support, ELF object file support, SVR4 1991-10-24 11:28:54 +00:00
xm-symmetry.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-sysv4.h * dbxread.c: Add symbol_size to struct dbx_symfile_info. 1992-06-13 06:39:27 +00:00
xm-tahoe.h * xm-mips.h (KERNEL_U_ADDR): Get from <machine/param.h>. 1992-09-11 09:11:11 +00:00
xm-ultra3.h Remove now obsolete signame.c and signame.h; functionality is handled by 1992-04-22 16:46:47 +00:00
xm-umax.h * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 1992-01-27 21:45:35 +00:00
xm-vax.h * xm-vax.h, xm-vaxult.h, xm-vaxbsd.h, config/mh-vaxult, 1992-02-01 12:46:55 +00:00
xm-vaxbsd.h * xm-vaxbsd.h: Close off comment. 1992-02-13 20:44:23 +00:00
xm-vaxult.h * xm-vaxult.h: Add decl for strdup(). 1992-04-06 23:37:23 +00:00

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

		README for gdb-4.4 release
    John Gilmore & Stu Grossman 	31 Jan 1992

This is GDB, the GNU source-level debugger, presently running under un*x.
A summary of new features is in the file `WHATS.NEW'.


Unpacking and Installation -- quick overview
==========================

In this release, the GDB debugger sources, the generic GNU include
files, the BFD ("binary file description") library, the readline library,
and a miscellaneous library all have directories of their own underneath
the gdb-4.4 directory.  The idea is that a variety of GNU tools can
share a common copy of these things.  Configuration scripts and
makefiles exist to cruise up and down this directory tree and
automatically build all the pieces in the right order.

When you unpack the gdb-4.4.tar.Z file, you'll get a directory called
`gdb-4.4', which contains:

  DOC.configure  bfd/           configure*     glob/          readline/
  Makefile.in    config/        configure.in   include/       texinfo/
  README         config.sub*    gdb/           libiberty/

To build GDB, you can just do:

	cd gdb-4.4
	./configure HOSTTYPE		(e.g. sun4, decstation)
	make
	cp gdb/gdb /usr/local/bin/gdb	(or wherever you want)

This will configure and build all the libraries as well as GDB.
If you get compiler warnings during this stage, see the `Reporting Bugs'
section below; there are a few known problems.

GDB can be used as a cross-debugger, running on a machine of one type
while debugging a program running on a machine of another type.  See below.


More Documentation
==================

   The GDB 4 release includes an already-formatted reference card,
ready for printing on a PostScript or GhostScript printer, in the `gdb'
subdirectory of the main source directory--in `gdb-4.4/gdb/refcard.ps'
of the version 4.4 release.  If you have a PostScript or GhostScript
printer, you can print the reference card by just sending `refcard.ps'
to the printer.

   If all you have is TeX, format the GDB reference card by typing:

     make refcard.dvi

   The GDB reference card is designed to print in landscape mode on US
"letter" size paper; that is, on a sheet 11 inches wide by 8.5 inches
high.  You will need to specify this form of printing as an option to
your DVI output program.

   All the documentation for GDB comes as part of the online
distribution.  The documentation is written in Texinfo format,
which is a documentation system that uses a single source file to
produce both on-line information and a printed manual.  You can use
one of the Info formatting commands to create the on-line version of
the documentation and TeX (or `texi2roff') to typeset the printed
version.

   GDB includes an already formatted copy of the on-line Info version
of this manual in the `gdb' subdirectory.  The main Info file is
`gdb-VERSION-NUMBER/gdb/gdb.info', and it refers to subordinate files
matching `gdb.info*' in the same directory.

   If you want to format these Info files yourself, you need one of the
Info formatting programs, such as `texinfo-format-buffer' or
`makeinfo'.

   If you have `makeinfo' installed, and are in the top level GDB
source directory (`gdb-4.4', in the case of version 4.4), you can make
the Info file by typing:

     cd gdb
     make gdb.info

   If you want to typeset and print copies of this manual, you need
TeX, a printing program such as `lpr', and `texinfo.tex', the Texinfo
definitions file.

   TeX is typesetting program; it does not print files directly, but
produces output files called DVI files.  To print a typeset document,
you need a program to print DVI files.  If your system has TeX
installed, chances are it has such a program.  The precise command to
use depends on your system; `lpr -d' is common; another is `dvips'. 
The DVI print command may require a file name without any extension or
a `.dvi' extension.

   TeX also requires a macro definitions file called `texinfo.tex'. 
This file tells TeX how to typeset a document written in Texinfo
format.  On its own, TeX cannot read, much less typeset a Texinfo
file.  `texinfo.tex' is distributed with GDB and is located in the
`gdb-VERSION-NUMBER/texinfo' directory.

   If you have TeX and a DVI printer program installed, you can
typeset and print this manual.  First switch to the the `gdb'
subdirectory of the main source directory (for example, to
`gdb-4.4/gdb') and then type:

     make gdb.dvi

Installing GDB
==============

   GDB comes with a `configure' script that automates the process of
preparing GDB for installation; you can then use `make' to build the
`gdb' program.

   The GDB distribution includes all the source code you need for GDB
in a single directory, whose name is usually composed by appending the
version number to `gdb'.

   For example, the GDB version 4.4 distribution is in the `gdb-4.4'
directory.  That directory contains:

`gdb-4.4/configure (and supporting files)'
     script for configuring GDB and all its supporting libraries.

`gdb-4.4/gdb'
     the source specific to GDB itself

`gdb-4.4/bfd'
     source for the Binary File Descriptor Library

`gdb-4.4/include'
     GNU include files

`gdb-4.4/libiberty'
     source for the `-liberty' free software library

`gdb-4.4/readline'
     source for the GNU command-line interface

   The simplest way to configure and build GDB is to run `configure'
from the `gdb-VERSION-NUMBER' source directory, which in this example
is the `gdb-4.4' directory.

   First switch to the `gdb-VERSION-NUMBER' source directory if you
are not already in it; then run `configure'.  Pass the identifier for
the platform on which GDB will run as an argument.

   For example:

     cd gdb-4.4
     ./configure HOST
     make

where HOST is an identifier such as `sun4' or `decstation', that
identifies the platform where GDB will run.

   These `configure' and `make' commands build the three libraries `bfd',
`readline', and `libiberty', then `gdb' itself.  The configured source
files, and the binaries, are left in the corresponding source
directories.

   `configure' is a Bourne-shell (`/bin/sh') script; if your system
does not recognize this automatically when you run a different shell,
you may need to run `sh' on it explicitly:

     sh configure HOST

   If you run `configure' from a directory that contains source
directories for multiple libraries or programs, such as the `gdb-4.4'
source directory for version 4.4, `configure' creates configuration
files for every directory level underneath (unless you tell it not to,
with the `--norecursion' option).

   You can run the `configure' script from any of the subordinate
directories in the GDB distribution, if you only want to configure
that subdirectory; but be sure to specify a path to it.

   For example, with version 4.4, type the following to configure only
the `bfd' subdirectory:

     cd gdb-4.4/bfd
     ../configure HOST

   You can install `gdb' anywhere; it has no hardwired paths. 
However, you should make sure that the shell on your path (named by
the `SHELL' environment variable) is publicly readable.  Remember that
GDB uses the shell to start your program--some systems refuse to let
GDB debug child processes whose programs are not readable.


Compiling GDB in Another Directory
==================================

   If you want to run GDB versions for several host or target machines,
you'll need a different `gdb' compiled for each combination of host
and target.  `configure' is designed to make this easy by allowing you
to generate each configuration in a separate subdirectory, rather than
in the source directory.  If your `make' program handles the `VPATH'
feature (GNU `make' does), running `make' in each of these directories
then builds the `gdb' program specified there.

   To build `gdb' in a separate directory, run `configure' with the
`--srcdir' option to specify where to find the source.  (Remember,
you'll also need to specify a path to find `configure' itself from
your working directory.)

   For example, with version 4.4, you can build GDB in a separate
directory for a Sun 4 like this:

     cd gdb-4.4
     mkdir ../gdb-sun4
     cd ../gdb-sun4
     ../gdb-4.4/configure --srcdir=../gdb-4.4 sun4
     make

   When `configure' builds a configuration using a remote source
directory, it creates a tree for the binaries with the same structure
(and using the same names) as the tree under the source directory.  In
the example, you'd find the Sun 4 library `libiberty.a' in the
directory `gdb-sun4/libiberty', and GDB itself in `gdb-sun4/gdb'.

   One popular use for building several GDB configurations in separate
directories is to configure GDB for cross-compiling (where GDB runs on
one machine--the host--while debugging programs that run on another
machine--the target).  You specify a cross-debugging target by giving
the `--target=TARGET' option to `configure'.

   When you run `make' to build a program or library, you must run it
in a configured directory--whatever directory you were in when you
called `configure' (or one of its subdirectories).

   The `Makefile' generated by `configure' for each source directory
also runs recursively.  If you type `make' in a source directory such
as `gdb-4.4' (or in a separate configured directory configured with
`--srcdir=PATH/gdb-4.4'), you will build all the required libraries,
then build GDB.

   When you have multiple hosts or targets configured in separate
directories, you can run `make' on them in parallel (for example, if
they are NFS-mounted on each of the hosts); they will not interfere
with each other.


Specifying Names for Hosts and Targets
======================================

   The specifications used for hosts and targets in the `configure'
script are based on a three-part naming scheme, but some short
predefined aliases are also supported.  The full naming scheme encodes
three pieces of information in the following pattern:

     ARCHITECTURE-VENDOR-OS

   For example, you can use the alias `sun4' as a HOST argument or in
a `+target=TARGET' option, but the equivalent full name is
`sparc-sun-sunos4'.

   The following table shows all the architectures, hosts, and OS
prefixes that `configure' recognizes in GDB version 4.4.  Entries in
the "OS prefix" column ending in a `*' may be followed by a release
number.


     ARCHITECTURE  VENDOR                     OS prefix
     ------------+--------------------------+---------------------------
                 |                          |
      580        | altos        hp          | aix*          msdos*
      a29k       | amd          ibm         | amigados      newsos*
      alliant    | amdahl       intel       | aout          nindy*
      arm        | aout         isi         | bout          osf*
      c1         | apollo       little      | bsd*          sco*
      c2         | att          mips        | coff          sunos*
      cray2      | bcs          motorola    | ctix*         svr4
      h8300      | bout         ncr         | dgux*         sym*
      i386       | bull         next        | dynix*        sysv*
      i860       | cbm          nyu         | ebmon         ultrix*
      i960       | coff         sco         | esix*         unicos*
      m68000     | convergent   sequent     | hds           unos*
      m68k       | convex       sgi         | hpux*         uts
      m88k       | cray         sony        | irix*         v88r*
      mips       | dec          sun         | isc*          vms*
      ns32k      | encore       unicom      | kern          vxworks*
      pyramid    | gould        utek        | mach*
      romp       | hitachi      wrs         |
      rs6000     |                          |
      sparc      |                          |
      tahoe      |                          |
      tron       |                          |
      vax        |                          |
      xmp        |                          |
      ymp        |                          |

     *Warning:* `configure' can represent a very large number of
     combinations of architecture, vendor, and OS.  There is by no
     means support available for all possible combinations!

   The `configure' script accompanying GDB does not provide any query
facility to list all supported host and target names or aliases. 
`configure' calls the Bourne shell script `config.sub' to map
abbreviations to full names; you can read the script, if you wish, or
you can use it to test your guesses on abbreviations--for example:

     % sh config.sub sun4
     sparc-sun-sunos4
     % sh config.sub sun3
     m68k-sun-sunos4
     % sh config.sub decstation
     mips-dec-ultrix
     % sh config.sub hp300bsd
     m68k-hp-bsd
     % sh config.sub i386v
     i386-none-sysv
     % sh config.sub i486v
     *** Configuration "i486v" not recognized

`config.sub' is also distributed in the GDB source directory
(`gdb-4.4', for version 4.4).


`configure' Options
===================

   Here is a summary of all the `configure' options and arguments that
you might use for building GDB:

     configure [--destdir=DIR] [--srcdir=PATH]
               [--norecursion] [--rm]
               [--target=TARGET] HOST

You may introduce options with a single `-' rather than `--' if you
prefer; but you may abbreviate option names if you use `--'.

`--destdir=DIR'
     DIR is an installation directory *path prefix*.  After you
     configure with this option, `make install' will install GDB as
     `DIR/bin/gdb', and the libraries in `DIR/lib'.  If you specify
     `--destdir=/usr/local', for example, `make install' creates
     `/usr/local/bin/gdb'.

`--srcdir=PATH'
     Use this option to make configurations in directories separate
     from the GDB source directories.  Among other things, you can use
     this to build (or maintain) several configurations
     simultaneously, in separate directories.  `configure' writes
     configuration specific files in the current directory, but
     arranges for them to use the source in the directory PATH. 
     `configure' will create directories under the working directory
     in parallel to the source directories below PATH.

`--norecursion'
     Configure only the directory level where `configure' is executed;
     do not propagate configuration to subdirectories.

`--rm'
     Remove the configuration that the other arguments specify.

`--target=TARGET'
     Configure GDB for cross-debugging programs running on the
     specified TARGET.  Without this option, GDB is configured to debug
     programs that run on the same machine (HOST) as GDB itself.

     There is no convenient way to generate a list of all available
     targets.

`HOST ...'
     Configure GDB to run on the specified HOST.

     There is no convenient way to generate a list of all available
     hosts.

`configure' accepts other options, for compatibility with configuring
other GNU tools recursively; but these are the only options that
affect GDB or its supporting libraries.


		Languages other than C

GDB provides some support for debugging C++ progams.  Partial Modula-2
support is now in GDB.  GDB should work with FORTRAN programs.  (If you
have problems, please send a bug report; you may have to refer to some
FORTRAN variables with a trailing underscore).  I am not aware of
anyone who is working on getting gdb to use the syntax of any other
language.  Pascal programs which use sets, subranges, file variables,
or nested functions will not currently work.


		Kernel debugging

I have't done this myself so I can't really offer any advice.
Remote debugging over serial lines works fine, but the kernel debugging
code in here has not been tested in years.  Van Jacobson claims to have
better kernel debugging.


		Remote debugging

The files m68k-stub.c and i386-stub.c contain two examples of remote
stubs to be used with remote.c.  They are designeded to run standalone
on a 68k or 386 cpu and communicate properly with the remote.c stub
over a serial line.

The file rem-multi.shar contains a general stub that can probably
run on various different flavors of unix to allow debugging over a
serial line from one machine to another.

Some working remote interfaces for talking to existing ROM monitors
are:
	remote-eb.c	 AMD 29000 "EBMON"
	remote-nindy.c   Intel 960 "Nindy"
	remote-adapt.c	 AMD 29000 "Adapt"
	remote-mm.c	 AMD 29000 "minimon"

Remote-vx.c and the vx-share subdirectory contain a remote interface for the
VxWorks realtime kernel, which communicates over TCP using the Sun
RPC library.  This would be a useful starting point for other remote-
via-ethernet back ends.


		Reporting Bugs

The correct address for reporting bugs found in gdb is
"bug-gdb@prep.ai.mit.edu".  Please email all bugs to that address.
Please include the GDB version number (e.g. gdb-4.4), and how
you configured it (e.g. "sun4" or "mach386 host, i586-intel-synopsys
target").

A known bug:

  * If you run with a watchpoint enabled, breakpoints will become
    erratic and might not stop the program.  Disabling or deleting the
    watchpoint will fix the problem.

GDB can produce warnings about symbols that it does not understand.  By
default, these warnings are disabled.  You can enable them by executing
`set complaint 10' (which you can put in your ~/.gdbinit if you like).
I recommend doing this if you are working on a compiler, assembler,
linker, or gdb, since it will point out problems that you may be able
to fix.  Warnings produced during symbol reading indicate some mismatch
between the object file and GDB's symbol reading code.  In many cases,
it's a mismatch between the specs for the object file format, and what
the compiler actually outputs or the debugger actually understands.

If you port gdb to a new machine, please send the required changes to
bug-gdb@prep.ai.mit.edu.  There's lots of information about doing your
own port in the file gdb-4.4/gdb/doc/gdbint.texinfo, which you can
print out, or read with `info' (see the Makefile.in there).  If your
changes are more than a few lines, obtain and send in a copyright
assignment from gnu@prep.ai.mit.edu, as described in the section
`Writing Code for GDB'.


		X Windows versus GDB

xgdb is obsolete.  We are not doing any development or support of it.

There is an "xxgdb", which shows more promise, which was posted to
comp.sources.x.

For those intersted in auto display of source and the availability of
an editor while debugging I suggest trying gdb-mode in gnu-emacs
(Try typing M-x gdb RETURN).  Comments on this mode are welcome.


		Writing Code for GDB

We appreciate having users contribute code that is of general use, but
for it to be included in future GDB releases it must be cleanly
written.  We do not want to include changes that will needlessly make
future maintainance difficult.  It is not much harder to do things
right, and in the long term it is worth it to the GNU project, and
probably to you individually as well.

If you make substantial changes, you'll have to file a copyright
assignment with the Free Software Foundation before we can produce a
release that includes your changes.  Send mail requesting the copyright
assignment to gnu@prep.ai.mit.edu.  Do this early, like before the
changes actually work, or even before you start them, because a manager
or lawyer on your end will probably make this a slow process.

Please code according to the GNU coding standards.  If you do not have
a copy, you can request one by sending mail to gnu@prep.ai.mit.edu.

Please try to avoid making machine-specific changes to
machine-independent files.  If this is unavoidable, put a hook in the
machine-independent file which calls a (possibly) machine-dependent
macro (for example, the IGNORE_SYMBOL macro can be used for any
symbols which need to be ignored on a specific machine.  Calling
IGNORE_SYMBOL in dbxread.c is a lot cleaner than a maze of #if
defined's).  The machine-independent code should do whatever "most"
machines want if the macro is not defined in param.h.  Using #if
defined can sometimes be OK (e.g. SET_STACK_LIMIT_HUGE) but should be
conditionalized on a specific feature of an operating system (set in
tm.h or xm.h) rather than something like #if defined(vax) or #if
defined(SYSV).  If you use an #ifdef on some symbol that is defined
in a header file (e.g. #ifdef TIOCSETP), *please* make sure that you
have #include'd the relevant header file in that module!

It is better to replace entire routines which may be system-specific,
rather than put in a whole bunch of hooks which are probably not going
to be helpful for any purpose other than your changes.  For example,
if you want to modify dbxread.c to deal with DBX debugging symbols
which are in COFF files rather than BSD a.out files, do something
along the lines of a macro GET_NEXT_SYMBOL, which could have
different definitions for COFF and a.out, rather than trying to put
the necessary changes throughout all the code in dbxread.c that
currently assumes BSD format.

When generalizing GDB along a particular interface, please use an
attribute-struct rather than inserting tests or switch statements
everywhere.  For example, GDB has been generalized to handle multiple
kinds of remote interfaces -- not by #ifdef's everywhere, but by
defining the "target_ops" structure and having a current target (as
well as a stack of targets below it, for memory references).  Whenever
something needs to be done that depends on which remote interface we
are using, a flag in the current target_ops structure is tested (e.g.
`target_has_stack'), or a function is called through a pointer in the
current target_ops structure.  In this way, when a new remote interface
is added, only one module needs to be touched -- the one that actually
implements the new remote interface.  Other examples of
attribute-structs are BFD access to multiple kinds of object file
formats, or GDB's access to multiple source languages.

Please avoid duplicating code.  For example, in GDB 3.x all the stuff
in infptrace.c was duplicated in *-dep.c, and so changing something
was very painful.  In GDB 4.x, these have all been consolidated
into infptrace.c.  infptrace.c can deal with variations between
systems the same way any system-independent file would (hooks, #if
defined, etc.), and machines which are radically different don't need
to use infptrace.c at all.  The same was true of core_file_command
and exec_file_command.


		Debugging gdb with itself

If gdb is limping on your machine, this is the preferred way to get it
fully functional.  Be warned that in some ancient Unix systems, like
Ultrix 4.0, a program can't be running in one process while it is being
debugged in another.  Rather than doing "./gdb ./gdb", which works on
Suns and such, you can copy gdb to gdb2 and then do "./gdb ./gdb2".

When you run gdb in the gdb source directory, it will read a ".gdbinit"
file that sets up some simple things to make debugging gdb easier.  The
"info" command, when executed without a subcommand in a gdb being
debugged by gdb, will pop you back up to the top level gdb.  See
.gdbinit for details.

I strongly recommend printing out the reference card and using it.
Send reference-card suggestions to bug-gdb@prep.ai.mit.edu, just like bugs.

If you use emacs, you will probably want to do a "make TAGS" after you
configure your distribution; this will put the machine dependent
routines for your local machine where they will be accessed first by a
M-period.

Also, make sure that you've either compiled gdb with your local cc, or
have run `fixincludes' if you are compiling with gcc.

(this is for editing this file with GNU emacs)
Local Variables:
mode: text
End: