binutils-gdb/bfd
Kai Tietz d078078ddb binutils/
2008-10-09  Kai Tietz  <kai.tietz@onevision.com>

	* dlltool.c (PAGE_SIZE): Make sure it has bfd_vma type.
	(PAGE_MASK): Likewise.
	(sfunc): Change to address size of bfd_vma for base-file.
	(flush_page): Likewise.
	(gen_exp_file): Likewise.
bfd/
2008-10-09  Kai Tietz  <kai.tietz@onevision.com>

	* cofflink.c (_bfd_coff_generic_relocate_section): Dump bfd_vma sized addresses instead of long sized.
2008-10-09 09:00:08 +00:00
..
doc * configure: Regenerate for new libtool. 2008-09-29 15:34:33 +00:00
hosts
po * configure.in (ALL_LINGUAS): Add "id". 2008-10-08 15:58:26 +00:00
acinclude.m4
aclocal.m4 * configure: Regenerate for new libtool. 2008-09-29 15:34:33 +00:00
aix5ppc-core.c
aix386-core.c
aout0.c
aout32.c
aout64.c
aout-adobe.c
aout-arm.c
aout-cris.c
aout-ns32k.c
aout-sparcle.c
aout-target.h
aout-tic30.c
aoutf1.h
aoutx.h
archive64.c
archive.c * archive.c (_bfd_archive_bsd_update_armap_timestamp): Cast stat 2008-08-10 18:49:09 +00:00
archures.c Add AVR architectures avr25, avr31, avr35, and avr51 to match GCC. 2008-08-09 05:35:13 +00:00
armnetbsd.c
bfd-in2.h * elf32-cris.c (TLSHOWTO32, TLSHOWTO16): New macros. 2008-10-04 17:18:36 +00:00
bfd-in.h bfd/ 2008-07-28 04:07:32 +00:00
bfd.c bfd/ 2008-08-17 03:12:50 +00:00
bfd.m4
bfdio.c
bfdwin.c
binary.c
bout.c
cache.c
cf-i386lynx.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
cf-sparclynx.c
ChangeLog binutils/ 2008-10-09 09:00:08 +00:00
ChangeLog-0001
ChangeLog-0203
ChangeLog-2004
ChangeLog-2005
ChangeLog-2006
ChangeLog-2007
ChangeLog-9193
ChangeLog-9495
ChangeLog-9697
ChangeLog-9899
cisco-core.c
coff64-rs6000.c * coffgen.c (coff_write_symbols): Check to see if a symbol's flags 2008-09-30 10:50:03 +00:00
coff-alpha.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-apollo.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-arm.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-aux.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-go32.c
coff-h8300.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-h8500.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-i386.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-i860.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-i960.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-ia64.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-m68k.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-m88k.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-maxq.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-mcore.c
coff-mips.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-or32.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-pmac.c
coff-ppc.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
coff-rs6000.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-sh.c * coff-sh.c (bfd_pe_print_pdata): Define to NULL for non 2008-07-21 14:09:57 +00:00
coff-sparc.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-stgo32.c
coff-svm68k.c
coff-tic4x.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-tic30.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-tic54x.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-tic80.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-u68k.c
coff-w65.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-we32k.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-x86_64.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-z8k.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coff-z80.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
coffcode.h * coffcode.h (coff_slurp_line_table): bfd_alloc lineno_cache first 2008-08-05 03:03:46 +00:00
coffgen.c * coffgen.c (coff_write_symbols): Check to see if a symbol's flags 2008-09-30 10:50:03 +00:00
cofflink.c binutils/ 2008-10-09 09:00:08 +00:00
coffswap.h
compress.c bfd/ 2008-07-10 01:32:23 +00:00
config.bfd
config.in bfd/ 2008-09-11 19:02:04 +00:00
configure * configure.in (ALL_LINGUAS): Add "id". 2008-10-08 15:58:26 +00:00
configure.com
configure.host
configure.in * configure.in (ALL_LINGUAS): Add "id". 2008-10-08 15:58:26 +00:00
COPYING
corefile.c
cpu-alpha.c
cpu-arc.c
cpu-arm.c
cpu-avr.c Add AVR architectures avr25, avr31, avr35, and avr51 to match GCC. 2008-08-09 05:35:13 +00:00
cpu-bfin.c
cpu-cr16.c
cpu-cr16c.c
cpu-cris.c
cpu-crx.c
cpu-d10v.c
cpu-d30v.c
cpu-dlx.c
cpu-fr30.c
cpu-frv.c
cpu-h8300.c
cpu-h8500.c
cpu-hppa.c
cpu-i370.c
cpu-i386.c
cpu-i860.c
cpu-i960.c
cpu-ia64-opc.c
cpu-ia64.c
cpu-ip2k.c
cpu-iq2000.c
cpu-m32c.c
cpu-m32r.c
cpu-m68hc11.c
cpu-m68hc12.c
cpu-m68k.c
cpu-m88k.c
cpu-m10200.c
cpu-m10300.c
cpu-maxq.c
cpu-mcore.c
cpu-mep.c
cpu-mips.c
cpu-mmix.c
cpu-msp430.c
cpu-mt.c
cpu-ns32k.c
cpu-openrisc.c
cpu-or32.c
cpu-pdp11.c
cpu-pj.c
cpu-powerpc.c
cpu-rs6000.c
cpu-s390.c
cpu-score.c
cpu-sh.c
cpu-sparc.c
cpu-spu.c
cpu-tic4x.c
cpu-tic30.c
cpu-tic54x.c
cpu-tic80.c
cpu-v850.c
cpu-vax.c
cpu-w65.c
cpu-we32k.c
cpu-xc16x.c
cpu-xstormy16.c
cpu-xtensa.c
cpu-z8k.c
cpu-z80.c
demo64.c
dep-in.sed
dwarf1.c
dwarf2.c PR ld/3191 2008-09-08 21:58:29 +00:00
ecoff.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
ecofflink.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
ecoffswap.h
efi-app-ia32.c
efi-app-ia64.c
efi-app-x86_64.c
efi-bsdrv-ia32.c
efi-bsdrv-ia64.c
efi-bsdrv-x86_64.c
efi-rtdrv-ia32.c
efi-rtdrv-ia64.c
efi-rtdrv-x86_64.c
elf32-am33lin.c
elf32-arc.c
elf32-arm.c * elf32-arm.c: Fix up comment describing Thumb to ARM interworking 2008-08-26 14:40:18 +00:00
elf32-avr.c Add AVR architectures avr25, avr31, avr35, and avr51 to match GCC. 2008-08-09 05:35:13 +00:00
elf32-avr.h
elf32-bfin.c * elf32-bfin.c (bfin_check_relocs, bfin_relocate_section, 2008-07-16 15:27:05 +00:00
elf32-cr16.c
elf32-cr16c.c
elf32-cris.c * elf32-cris.c (TLSHOWTO32, TLSHOWTO16): New macros. 2008-10-04 17:18:36 +00:00
elf32-crx.c
elf32-d10v.c
elf32-d30v.c
elf32-dlx.c
elf32-fr30.c
elf32-frv.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
elf32-gen.c
elf32-h8300.c
elf32-hppa.c
elf32-hppa.h
elf32-i370.c
elf32-i386.c bfd/ChangeLog: 2008-07-28 18:07:05 +00:00
elf32-i860.c
elf32-i960.c
elf32-ip2k.c
elf32-iq2000.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
elf32-m32c.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
elf32-m32r.c
elf32-m68hc1x.c
elf32-m68hc1x.h
elf32-m68hc11.c
elf32-m68hc12.c
elf32-m68k.c
elf32-m88k.c
elf32-mcore.c
elf32-mep.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
elf32-mips.c 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> 2008-08-08 19:24:49 +00:00
elf32-msp430.c
elf32-mt.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
elf32-openrisc.c
elf32-or32.c
elf32-pj.c
elf32-ppc.c * elf32-ppc.c (ppc_elf_finish_dynamic_sections): Handle vxworks 2008-09-19 09:51:32 +00:00
elf32-ppc.h
elf32-s390.c
elf32-score.c
elf32-sh64-com.c
elf32-sh64.c
elf32-sh64.h
elf32-sh-relocs.h
elf32-sh-symbian.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
elf32-sh.c
elf32-sparc.c
elf32-spu.c bfd/ 2008-09-29 14:12:02 +00:00
elf32-spu.h
elf32-v850.c
elf32-vax.c
elf32-xc16x.c
elf32-xstormy16.c
elf32-xtensa.c * elf32-xtensa.c (elf_xtensa_check_relocs): Check for negative refcount. 2008-09-18 00:37:47 +00:00
elf32.c
elf64-alpha.c
elf64-gen.c
elf64-hppa.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
elf64-hppa.h
elf64-mips.c 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> 2008-08-08 19:24:49 +00:00
elf64-mmix.c
elf64-ppc.c * elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Don't attempt to 2008-10-09 00:55:52 +00:00
elf64-ppc.h
elf64-s390.c
elf64-sh64.c
elf64-sparc.c
elf64-x86-64.c bfd/ChangeLog: 2008-07-28 18:07:05 +00:00
elf64.c
elf-attrs.c
elf-bfd.h 2008-08-20 Bob Wilson <bob.wilson@acm.org> 2008-08-20 23:28:59 +00:00
elf-eh-frame.c bfd/ 2008-09-17 07:50:29 +00:00
elf-hppa.h * elf-hppa.h (elf_hppa_reloc_final_type): Handle R_PARISC_GPREL64, 2008-08-28 02:33:45 +00:00
elf-m10200.c
elf-m10300.c * elf-m10300.c (mn10300_elf_final_link_relocate): Correct overflow 2008-07-15 18:48:07 +00:00
elf-strtab.c
elf-vxworks.c
elf-vxworks.h
elf.c * elf.c (assign_file_positions_for_load_sections): When checking 2008-10-08 08:30:27 +00:00
elfcode.h * elfcore.h (elf_core_file_p): Ensure we have a backend match 2008-08-01 12:21:28 +00:00
elfcore.h * elfcore.h (elf_core_file_p): Ensure we have a backend match 2008-08-01 12:21:28 +00:00
elflink.c bfd/ 2008-10-03 09:40:49 +00:00
elfn32-mips.c 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> 2008-08-08 19:24:49 +00:00
elfxx-ia64.c
elfxx-mips.c * elfxx-mips.c (mips16_stub_symndx) <sec>: Mark argument as 2008-09-09 03:17:13 +00:00
elfxx-mips.h 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com> 2008-08-08 19:24:49 +00:00
elfxx-sparc.c
elfxx-sparc.h
elfxx-target.h bfd/ 2008-08-07 20:04:32 +00:00
epoc-pe-arm.c
epoc-pei-arm.c
format.c
freebsd.h
gen-aout.c
genlink.h
go32stub.h
hash.c
host-aout.c
hp300bsd.c
hp300hpux.c
hppabsd-core.c
hpux-core.c
i386aout.c
i386bsd.c
i386dynix.c
i386freebsd.c
i386linux.c
i386lynx.c
i386mach3.c
i386msdos.c
i386netbsd.c
i386os9k.c
ieee.c
ihex.c
init.c
irix-core.c
libaout.h
libbfd-in.h
libbfd.c
libbfd.h * elf32-cris.c (TLSHOWTO32, TLSHOWTO16): New macros. 2008-10-04 17:18:36 +00:00
libcoff-in.h * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
libcoff.h Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
libecoff.h
libhppa.h
libieee.h
libnlm.h
liboasys.h
libpei.h * coff-sh.c (bfd_pe_print_pdata): Define to NULL for non 2008-07-21 14:09:57 +00:00
libxcoff.h
linker.c bfd/ 2008-10-03 09:40:49 +00:00
lynx-core.c
m68k4knetbsd.c
m68klinux.c
m68knetbsd.c
m88kmach3.c
m88kopenbsd.c
mach-o-target.c
mach-o.c 2008-09-05 Tristan Gingold <gingold@adacore.com> 2008-09-05 08:07:54 +00:00
mach-o.h 2008-09-05 Tristan Gingold <gingold@adacore.com> 2008-09-05 08:07:54 +00:00
MAINTAINERS
Makefile.am run "make dep-am" 2008-09-30 07:49:32 +00:00
Makefile.in run "make dep-am" 2008-09-30 07:49:32 +00:00
makefile.vms
mep-relocs.pl
merge.c
mipsbsd.c
mmo.c
netbsd-core.c
netbsd.h
newsos3.c
nlm32-alpha.c
nlm32-i386.c
nlm32-ppc.c
nlm32-sparc.c
nlm32.c
nlm64.c
nlm-target.h
nlm.c
nlmcode.h
nlmswap.h
ns32k.h
ns32knetbsd.c
oasys.c
opncls.c (find_separate_debug_file): Use the canonical 2008-08-23 08:08:58 +00:00
osf-core.c
pc532-mach.c
pdp11.c
pe-arm-wince.c * coff-sh.c (bfd_pe_print_pdata): Define to NULL for non 2008-07-21 14:09:57 +00:00
pe-arm.c
pe-i386.c
pe-mcore.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
pe-mips.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
pe-ppc.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
pe-sh.c
pe-x86_64.c
pef-traceback.h
pef.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
pef.h
pei-arm-wince.c
pei-arm.c
pei-i386.c
pei-mcore.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
pei-mips.c
pei-ppc.c * pe-arm-wince.c (pe_print_compressed_pdata): Define new function to 2008-07-18 11:30:22 +00:00
pei-sh.c
pei-x86_64.c
peicode.h
peXXigen.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
PORTING
ppcboot.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
ptrace-core.c
README
reloc16.c
reloc.c * elf32-cris.c (TLSHOWTO32, TLSHOWTO16): New macros. 2008-10-04 17:18:36 +00:00
riscix.c
rs6000-core.c
sco5-core.c
section.c
simple.c
som.c * elf-hppa.h (elf_hppa_reloc_final_type): Handle R_PARISC_GPREL64, 2008-08-28 02:33:45 +00:00
som.h
sparclinux.c
sparclynx.c
sparcnetbsd.c
srec.c
stab-syms.c
stabs.c
stamp-h.in
sunos.c
syms.c
sysdep.h
targets.c
targmatch.sed
tekhex.c
ticoff.h
TODO
trad-core.c
vax1knetbsd.c
vaxbsd.c
vaxnetbsd.c
versados.c
version.h daily update 2008-10-09 00:14:24 +00:00
vms-gsd.c
vms-hdr.c
vms-misc.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
vms-tir.c
vms.c
vms.h
warning.m4
xcoff-target.h
xcofflink.c
xsym.c Silence gcc printf warnings 2008-07-30 04:34:58 +00:00
xsym.h
xtensa-isa.c
xtensa-modules.c

BFD is an object file library.  It permits applications to use the
same routines to process object files regardless of their format.

BFD is used by the GNU debugger, assembler, linker, and the binary
utilities.

The documentation on using BFD is scanty and may be occasionally
incorrect.  Pointers to documentation problems, or an entirely
rewritten manual, would be appreciated.

There is some BFD internals documentation in doc/bfdint.texi which may
help programmers who want to modify BFD.

BFD is normally built as part of another package.  See the build
instructions for that package, probably in a README file in the
appropriate directory.

BFD supports the following configure options:

  --target=TARGET
	The default target for which to build the library.  TARGET is
	a configuration target triplet, such as sparc-sun-solaris.
  --enable-targets=TARGET,TARGET,TARGET...
	Additional targets the library should support.  To include
	support for all known targets, use --enable-targets=all.
  --enable-64-bit-bfd
	Include support for 64 bit targets.  This is automatically
	turned on if you explicitly request a 64 bit target, but not
	for --enable-targets=all.  This requires a compiler with a 64
	bit integer type, such as gcc.
  --enable-shared
	Build BFD as a shared library.
  --with-mmap
	Use mmap when accessing files.  This is faster on some hosts,
	but slower on others.  It may not work on all hosts.

Report bugs with BFD to bug-binutils@gnu.org.

Patches are encouraged.  When sending patches, always send the output
of diff -u or diff -c from the original file to the new file.  Do not
send default diff output.  Do not make the diff from the new file to
the original file.  Remember that any patch must not break other
systems.  Remember that BFD must support cross compilation from any
host to any target, so patches which use ``#ifdef HOST'' are not
acceptable.  Please also read the ``Reporting Bugs'' section of the
gcc manual.

Bug reports without patches will be remembered, but they may never get
fixed until somebody volunteers to fix them.