binutils-gdb/gdb/testsuite/gdb.trace/disconnected-tracing.exp
Pedro Alves 4ec7020176 Remove superfluous semicolons from testsuite throughout.
A few months ago semicolons after "return" were removed throughout the
testsuite.  However, as I pointed out in review, they're unnecessary
not just after "return", but pretty much after any tcl command.  ';'
is the command separator, and you only need it if there's another
command on the same line afterwards.

This patch was written by running:

 $ find . -name "*.exp" | xargs grep -l ";\s*$" | xargs sed -i 's/\([^#][^\s*;]*\)\s*;\s*$/\1/'

and then undoing changes to comments, and lib/future.exp.

Tested on x86_64 Fedora 17.

gdb/testsuite/
2013-06-07  Pedro Alves  <palves@redhat.com>

	* boards/native-extended-gdbserver.exp: Remove semicolon.
	* config/arm-ice.exp: Likewise.
	* config/bfin.exp: Likewise.
	* config/cygmon.exp: Likewise.
	* config/h8300.exp: Likewise.
	* config/monitor.exp: Likewise.
	* config/sid.exp: Likewise.
	* config/sim.exp: Likewise.
	* config/slite.exp: Likewise.
	* config/vx.exp: Likewise.
	* gdb.arch/i386-bp_permanent.exp: Likewise.
	* gdb.asm/asm-source.exp: Likewise.
	* gdb.base/args.exp: Likewise.
	* gdb.base/attach-pie-misread.exp: Likewise.
	* gdb.base/auxv.exp: Likewise.
	* gdb.base/bigcore.exp: Likewise.
	* gdb.base/bitfields2.exp: Likewise.
	* gdb.base/bitfields.exp: Likewise.
	* gdb.base/break.exp: Likewise.
	* gdb.base/break-interp.exp: Likewise.
	* gdb.base/callfuncs.exp: Likewise.
	* gdb.base/call-sc.exp: Likewise.
	* gdb.base/commands.exp: Likewise.
	* gdb.base/corefile.exp: Likewise.
	* gdb.base/dbx.exp: Likewise.
	* gdb.base/ending-run.exp: Likewise.
	* gdb.base/exprs.exp: Likewise.
	* gdb.base/funcargs.exp: Likewise.
	* gdb.base/hbreak2.exp: Likewise.
	* gdb.base/huge.exp: Likewise.
	* gdb.base/list.exp: Likewise.
	* gdb.base/memattr.exp: Likewise.
	* gdb.base/overlays.exp: Likewise.
	* gdb.base/printcmds.exp: Likewise.
	* gdb.base/recurse.exp: Likewise.
	* gdb.base/remotetimeout.exp: Likewise.
	* gdb.base/reread.exp: Likewise.
	* gdb.base/savedregs.exp: Likewise.
	* gdb.base/scope.exp: Likewise.
	* gdb.base/sepdebug.exp: Likewise.
	* gdb.base/setshow.exp: Likewise.
	* gdb.base/setvar.exp: Likewise.
	* gdb.base/sigaltstack.exp: Likewise.
	* gdb.base/siginfo-addr.exp: Likewise.
	* gdb.base/siginfo.exp: Likewise.
	* gdb.base/siginfo-obj.exp: Likewise.
	* gdb.base/sigrepeat.exp: Likewise.
	* gdb.base/sigstep.exp: Likewise.
	* gdb.base/structs.exp: Likewise.
	* gdb.base/testenv.exp: Likewise.
	* gdb.base/twice.exp: Likewise.
	* gdb.base/valgrind-db-attach.exp: Likewise.
	* gdb.base/valgrind-infcall.exp: Likewise.
	* gdb.base/varargs.exp: Likewise.
	* gdb.base/watchpoint.exp: Likewise.
	* gdb.cp/gdb1355.exp: Likewise.
	* gdb.cp/misc.exp: Likewise.
	* gdb.disasm/hppa.exp: Likewise.
	* gdb.disasm/t01_mov.exp: Likewise.
	* gdb.disasm/t02_mova.exp: Likewise.
	* gdb.disasm/t03_add.exp: Likewise.
	* gdb.disasm/t04_sub.exp: Likewise.
	* gdb.disasm/t05_cmp.exp: Likewise.
	* gdb.disasm/t06_ari2.exp: Likewise.
	* gdb.disasm/t07_ari3.exp: Likewise.
	* gdb.disasm/t08_or.exp: Likewise.
	* gdb.disasm/t09_xor.exp: Likewise.
	* gdb.disasm/t10_and.exp: Likewise.
	* gdb.disasm/t11_logs.exp: Likewise.
	* gdb.disasm/t12_bit.exp: Likewise.
	* gdb.disasm/t13_otr.exp: Likewise.
	* gdb.gdb/selftest.exp: Likewise.
	* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
	* gdb.mi/mi-reverse.exp: Likewise.
	* gdb.pascal/floats.exp: Likewise.
	* gdb.python/py-inferior.exp: Likewise.
	* gdb.threads/attach-into-signal.exp: Likewise.
	* gdb.threads/pthreads.exp: Likewise.
	* gdb.threads/thread_events.exp: Likewise.
	* gdb.threads/watchthreads.exp: Likewise.
	* gdb.trace/actions-changed.exp: Likewise.
	* gdb.trace/actions.exp: Likewise.
	* gdb.trace/ax.exp: Likewise.
	* gdb.trace/backtrace.exp: Likewise.
	* gdb.trace/change-loc.exp: Likewise.
	* gdb.trace/deltrace.exp: Likewise.
	* gdb.trace/disconnected-tracing.exp: Likewise.
	* gdb.trace/ftrace.exp: Likewise.
	* gdb.trace/infotrace.exp: Likewise.
	* gdb.trace/passc-dyn.exp: Likewise.
	* gdb.trace/passcount.exp: Likewise.
	* gdb.trace/pending.exp: Likewise.
	* gdb.trace/qtro.exp: Likewise.
	* gdb.trace/range-stepping.exp: Likewise.
	* gdb.trace/report.exp: Likewise.
	* gdb.trace/save-trace.exp: Likewise.
	* gdb.trace/status-stop.exp: Likewise.
	* gdb.trace/strace.exp: Likewise.
	* gdb.trace/tfile.exp: Likewise.
	* gdb.trace/tfind.exp: Likewise.
	* gdb.trace/trace-break.exp: Likewise.
	* gdb.trace/tracecmd.exp: Likewise.
	* gdb.trace/trace-mt.exp: Likewise.
	* gdb.trace/tspeed.exp: Likewise.
	* gdb.trace/tsv.exp: Likewise.
	* gdb.trace/while-stepping.exp: Likewise.
	* lib/gdb.exp: Likewise.
	* lib/gdbserver-support.exp: Likewise.
	* lib/java.exp: Likewise.
	* lib/mi-support.exp: Likewise.
	* lib/pascal.exp: Likewise.
	* lib/prompt.exp: Likewise.
	* lib/trace-support.exp: Likewise.
2013-06-07 17:31:09 +00:00

150 lines
4.1 KiB
Plaintext

# Copyright 2012-2013 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Test of disconnected-tracing.
load_lib "trace-support.exp"
standard_testfile
set executable $testfile
set expfile $testfile.exp
set gdbserver_reconnect_p 1
if { [info proc gdb_reconnect] == "" } {
unsupported "target does not support reconnect"
return -1
}
if [prepare_for_testing $expfile $executable $srcfile \
{debug nowarnings}] {
untested "failed to prepare for trace tests"
return -1
}
if ![runto_main] {
fail "can't run to main to check for trace support"
return -1
}
if ![gdb_target_supports_trace] {
unsupported "target does not support trace"
return -1
}
# Disconnect in tracing.
proc disconnected_tracing { } {
with_test_prefix "trace" {
global executable
global decimal
global srcfile
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
fail "Can't run to main"
return -1
}
gdb_test_no_output "set confirm off"
gdb_test_no_output "set disconnected-tracing on"
gdb_test "trace start" ".*"
gdb_trace_setactions "collect on tracepoint 2" "2" \
"collect foo" "^$"
gdb_test "break end" "Breakpoint ${decimal} at .*"
gdb_test_no_output "tstart"
gdb_test "continue" "Continuing\\.\[ \r\n\]+Breakpoint.*"
gdb_test_no_output "tstop"
gdb_test "info tracepoints" ".*in start at.*" \
"first info tracepoints"
gdb_test "disconnect" "Ending remote debugging\\." "first disconnect"
if { [gdb_reconnect] == 0 } {
pass "first reconnect after unload"
} else {
fail "first reconnect after unload"
return 0
}
gdb_test "info tracepoints" ".*in start at.*" \
"second info tracepoints"
delete_breakpoints
gdb_test "info tracepoints" ".*No tracepoints..*" \
"third info tracepoints"
gdb_test "disconnect" "Ending remote debugging\\." "second disconnect"
if { [gdb_reconnect] == 0 } {
pass "second reconnect after unload"
} else {
fail "second reconnect after unload"
return 0
}
gdb_test "tstatus"
gdb_test "info tracepoints" \
"Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+tracepoint keep y.* in start at .*$srcfile:\[0-9\]+.
\[\t \]+tracepoint already hit 1 time.
\[\t \]+trace buffer usage ${decimal} bytes.
\[\t \]+collect foo.*" \
"fourth info tracepoints"
}
}
disconnected_tracing
# Disconnected in tfind
proc disconnected_tfind { } {
with_test_prefix "tfind" {
global executable
global decimal
# Start with a fresh gdb.
clean_restart ${executable}
if ![runto_main] {
fail "Can't run to main"
return -1
}
gdb_test_no_output "set confirm off"
gdb_test_no_output "set disconnected-tracing on"
gdb_test "trace start" ".*"
gdb_test_no_output "tstart"
gdb_test "break end" "Breakpoint ${decimal} at .*"
gdb_test "continue" "Continuing\\.\[ \r\n\]+Breakpoint.*"
gdb_test_no_output "tstop"
gdb_test "tfind" "Found trace frame 0, tracepoint .*" "tfind frame 0"
gdb_test "p \$trace_frame" ".*\\\$${decimal} = 0.*" \
"p \$trace_frame before disconnected"
gdb_test "p \$tracepoint" ".*\\\$${decimal} = 2.*" \
"p \$tracepoint before disconnected"
gdb_test "disconnect" "Ending remote debugging\\." "first disconnect"
gdb_test "p \$trace_frame" ".*\\\$${decimal} = -1.*"
gdb_test "p \$tracepoint" ".*\\\$${decimal} = -1.*"
gdb_test "p \$trace_line" ".*\\\$${decimal} = -1.*"
gdb_test "p \$trace_file" ".*\\\$${decimal} = void.*"
gdb_test "p \$trace_func" ".*\\\$${decimal} = void.*"
}
}
disconnected_tfind