binutils-gdb/gas/configure.in
Ian Lance Taylor 894cca2569 Fri Apr 18 11:51:35 1997 Niklas Hallqvist <niklas@appli.se>
* configure.in (alpha*-*-openbsd*): New target.
	* configure: Rebuild.
1997-04-18 15:52:33 +00:00

824 lines
24 KiB
Plaintext

dnl Process this file with autoconf to produce a configure script.
dnl
dnl And be careful when changing it! If you must add tests with square
dnl brackets, be sure changequote invocations surround it.
dnl
dnl
AC_PREREQ(2.5)dnl v2.5 needed for --bindir et al
AC_INIT(as.h)dnl
dnl
user_bfd_gas=
AC_ARG_ENABLE(bfd-assembler,
[ --enable-bfd-assembler use BFD back end for writing object files],
[case "${enableval}" in
yes) need_bfd=yes user_bfd_gas=yes ;;
no) user_bfd_gas=no ;;
*) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
esac])dnl
AC_ARG_ENABLE(targets,
[ targets alternative target configurations besides the primary],
[case "${enableval}" in
yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
;;
no) enable_targets= ;;
*) enable_targets=$enableval ;;
esac])dnl
AC_ARG_ENABLE(shared,
[ --enable-shared build shared BFD library],
[case "${enableval}" in
yes) shared=true shared_bfd=true shared_opcodes=true ;;
no) shared=false ;;
*bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
*opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
*bfd*) shared=true shared_bfd=true ;;
*opcodes*) shared=true shared_opcodes=true ;;
*) shared=false ;;
esac])dnl
AC_ARG_ENABLE(commonbfdlib,
[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
[case "${enableval}" in
yes) commonbfdlib=true ;;
no) commonbfdlib=false ;;
*) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
esac])dnl
# Generate a header file -- gets more post-processing by Makefile later.
AC_CONFIG_HEADER(conf)
dnl For recursion to work right, this must be an absolute pathname.
AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
te_file=generic
canon_targets=""
if test -n "$enable_targets" ; then
for t in `echo $enable_targets | sed 's/,/ /g'`; do
result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $t 2>/dev/null`
if test -n "$result" ; then
canon_targets="$canon_targets $result"
# else
# # Permit "all", etc. We don't support it yet though.
# canon_targets="$canon_targets $t"
fi
done
GAS_UNIQ(canon_targets)
fi
emulations=""
for this_target in $target $canon_targets ; do
changequote(,)dnl
eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
changequote([,])dnl
# check for architecture variants
case ${cpu} in
armeb) cpu_type=arm endian=big ;;
arm*) cpu_type=arm endian=little ;;
hppa*) cpu_type=hppa ;;
changequote(,)dnl
i[456]86) cpu_type=i386 ;;
m680[012346]0) cpu_type=m68k ;;
m68008) cpu_type=m68k ;;
m683??) cpu_type=m68k ;;
changequote([,])dnl
m8*) cpu_type=m88k ;;
mips*el) cpu_type=mips endian=little ;;
mips*) cpu_type=mips endian=big ;;
powerpcle*) cpu_type=ppc endian=little ;;
powerpc*) cpu_type=ppc endian=big ;;
rs6000*) cpu_type=ppc ;;
sparc64) cpu_type=sparc want_sparc_v9=true ;;
sparc*) cpu_type=sparc ;;
*) cpu_type=${cpu} ;;
esac
if test ${this_target} = $target ; then
target_cpu_type=${cpu_type}
elif test ${target_cpu_type} != ${cpu_type} ; then
continue
fi
targ=${cpu_type}
generic_target=${cpu_type}-$vendor-$os
dev=no
bfd_gas=no
em=generic
# assign object format
case ${generic_target} in
a29k-*-coff) fmt=coff targ=ebmon29k ;;
a29k-amd-udi) fmt=coff targ=ebmon29k ;;
a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
a29k-*-vxworks*) fmt=coff ;;
alpha-*-*vms*) fmt=evax ;;
alpha-*-netware*) fmt=ecoff ;;
alpha-*-openbsd*) fmt=ecoff ;;
alpha-*-osf*) fmt=ecoff ;;
alpha-*-linuxecoff*) fmt=ecoff ;;
alpha-*-linux*) fmt=elf em=linux ;;
# start-sanitize-arc
arc-*-elf*) fmt=elf bfd_gas=yes ;;
# end-sanitize-arc
arm-*-riscix*) fmt=aout targ=arm-lit em=riscix ;;
arm-*-aout) fmt=aout
case "$endian" in
big) targ=arm-big ;;
*) targ=arm-lit ;;
esac
;;
arm-*-coff) fmt=coff ;;
arm-*-riscix*) fmt=aout ;;
arm-*-pe) fmt=coff targ=armcoff em=pe ;;
d10v-*-*) fmt=elf bfd_gas=yes ;;
# start-sanitize-d30v
d30v-*-*) fmt=elf bfd_gas=yes ;;
# end-sanitize-d30v
hppa-*-*elf*) fmt=elf em=hppa ;;
hppa-*-lites*) fmt=elf em=hppa ;;
hppa-*-osf*) fmt=som em=hppa ;;
hppa-*-rtems*) fmt=elf em=hppa ;;
hppa-*-hpux*) fmt=som em=hppa ;;
hppa-*-bsd*) fmt=som em=hppa ;;
hppa-*-hiux*) fmt=som em=hppa ;;
h8300-*-coff) fmt=coff ;;
i386-ibm-aix*) fmt=coff targ=i386coff
em=i386aix ;;
i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;;
i386-*-bsd*) fmt=aout em=386bsd ;;
i386-*-netbsd0.8) fmt=aout em=386bsd ;;
i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
i386-*-linux*coff*) fmt=coff em=linux
targ=i386coff ;;
i386-*-linux*) fmt=elf em=linux ;;
i386-*-lynxos*) fmt=coff targ=i386coff
em=lynx ;;
i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
fmt=elf ;;
i386-*-sco*elf*) fmt=elf targ=sco5 ;;
i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
fmt=coff targ=i386coff ;;
i386-*-vsta) fmt=aout ;;
i386-*-go32) fmt=coff targ=i386coff ;;
i386-*-rtems*) fmt=coff targ=i386coff ;;
i386-*-gnu*) fmt=elf ;;
i386-*-mach*)
fmt=aout em=mach bfd_gas=yes ;;
i386-*-msdos*) fmt=aout ;;
i386-*-moss*) fmt=elf ;;
i386-*-pe) fmt=coff targ=i386coff em=pe ;;
i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
i960-*-bout) fmt=bout ;;
i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
i960-*-nindy*) fmt=bout ;;
i960-*-vxworks4*) fmt=bout ;;
i960-*-vxworks5.0) fmt=bout ;;
i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
i960-*-vxworks*) fmt=bout ;;
m32r-*-*) fmt=elf bfd_gas=yes ;;
m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
fmt=aout em=sun3 ;;
m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
m68k-*-sysv4*) # must be before -sysv*
fmt=elf em=svr4 ;;
m68k-*-elf*) fmt=elf ;;
m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
fmt=coff targ=m68kcoff ;;
m68k-*-hpux*) fmt=hp300 em=hp300 ;;
m68k-*-linux*aout*) fmt=aout em=linux ;;
m68k-*-linux*) fmt=elf em=linux ;;
m68k-*-lynxos*) fmt=coff targ=m68kcoff
em=lynx ;;
m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
m68k-*-psos*) fmt=elf em=psos;;
m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
m88k-*-coff*) fmt=coff targ=m88kcoff ;;
# don't change em like *-*-bsd does
mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
mips-dec-bsd*) fmt=aout targ=mips-lit ;;
mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
mips-*-osf*) fmt=ecoff targ=mips-lit endian=little ;;
mips-*-ecoff*) fmt=ecoff
case "$endian" in
big) targ=mips-big ;;
*) targ=mips-lit ;;
esac
;;
mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
mips-*-irix6*) fmt=elf targ=mips-big ;;
mips-*-irix5*) fmt=elf targ=mips-big ;;
mips-*-irix*) fmt=ecoff targ=mips-big ;;
mips-*-lnews*) fmt=ecoff targ=mips-lit em=lnews ;;
mips-*-riscos*) fmt=ecoff targ=mips-big ;;
mips-*-sysv*) fmt=ecoff targ=mips-big ;;
mips-*-elf* | mips-*-rtems* | mips-*-linux* | mips-*-gnu* | mips-*-openbsd*)
fmt=elf
case "$endian" in
big) targ=mips-big ;;
*) targ=mips-lit ;;
esac
;;
mn10200-*-*) fmt=elf bfd_gas=yes ;;
mn10300-*-*) fmt=elf bfd_gas=yes ;;
ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
fmt=coff em=pe
case "$endian" in
big) targ=ppc-big ;;
*) targ=ppc-lit ;;
esac
;;
ppc-*-aix*) fmt=coff ;;
ppc-*-beos*) fmt=coff ;;
ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
fmt=elf
case "$endian" in
big) targ=ppc-big ;;
*) targ=ppc-lit ;;
esac
;;
ppc-*-linux*) fmt=elf
case "$endian" in
big) targ=ppc-big ;;
*) AC_MSG_ERROR(Linux must be configured big endian) ;;
esac
;;
ppc-*-solaris*) fmt=elf
case "$endian" in
big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
*) targ=ppc-sol ;;
esac
;;
ppc-*-rtems*)
fmt=elf
case "$endian" in
big) targ=ppc-big ;;
*) targ=ppc-lit ;;
esac
;;
ppc-*-macos* | ppc-*-mpw*)
fmt=coff em=macos ;;
ppc-*-netware*) fmt=elf em=ppcnw ;;
sh-*-elf*) fmt=elf ;;
sh-*-coff*) fmt=coff ;;
ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
sparc-*-rtems*) fmt=aout ;;
sparc-*-sunos4*) fmt=aout em=sun3 ;;
sparc-*-aout | sparc*-*-vxworks*)
fmt=aout em=sparcaout ;;
sparc-*-coff) fmt=coff ;;
sparc-*-linux*aout*) fmt=aout em=linux ;;
sparc-*-linux*) fmt=elf em=linux ;;
sparc-*-lynxos*) fmt=coff em=lynx ;;
sparc-fujitsu-none) fmt=aout ;;
sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
fmt=elf ;;
sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
# start-sanitize-tic80
tic80-*-*) fmt=coff targ=tic80coff;;
# end-sanitize-tic80
# start-sanitize-v850
v850-*-*) fmt=elf bfd_gas=yes ;;
# end-sanitize-v850
vax-*-bsd* | vax-*-ultrix*)
fmt=aout ;;
vax-*-vms) fmt=vms ;;
z8k-*-coff | z8k-*-sim)
fmt=coff ;;
w65-*-*) fmt=coff ;;
*-*-aout | *-*-scout)
fmt=aout ;;
*-*-nindy*)
fmt=bout ;;
*-*-bsd*)
fmt=aout em=sun3 ;;
*-*-generic) fmt=generic ;;
*-*-xray | *-*-hms) fmt=coff ;;
*-*-sim) fmt=coff ;;
*-*-elf | *-*-sysv4* | *-*-solaris*)
AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
fmt=elf dev=yes ;;
*-*-vxworks) fmt=aout ;;
*-*-netware) fmt=elf ;;
esac
case ${cpu_type}-${fmt} in
alpha-*) bfd_gas=yes ;;
arm-*) bfd_gas=yes ;;
# not yet
# i386-aout) bfd_gas=preferred ;;
mips-*) bfd_gas=yes ;;
ns32k-*) bfd_gas=yes ;;
ppc-*) bfd_gas=yes ;;
sparc-*) bfd_gas=yes ;;
*-elf) bfd_gas=yes ;;
*-ecoff) bfd_gas=yes ;;
*-som) bfd_gas=yes ;;
*) ;;
esac
# Other random stuff.
# do we need the opcodes library?
case ${cpu_type} in
vax | i386)
;;
*)
need_opcodes=yes
if test "${shared_opcodes}" = "true"; then
# A shared libopcodes must be linked against libbfd.
need_bfd=yes
fi
;;
esac
test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
case ${cpu}-${vendor}-${os} in
sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
esac
case ${cpu_type} in
m32r)
case ${extra_objects} in
*cgen.o*) ;;
*) extra_objects="$extra_objects cgen.o"
AC_DEFINE(USING_CGEN)
;;
esac
;;
m68k)
case ${extra_objects} in
*m68k-parse.o*) ;;
*) extra_objects="$extra_objects m68k-parse.o" ;;
esac
;;
mips)
echo ${extra_objects} | grep -s "itbl-parse.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects itbl-parse.o"
fi
echo ${extra_objects} | grep -s "itbl-lex.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects itbl-lex.o"
fi
echo ${extra_objects} | grep -s "itbl-ops.o"
if test $? -ne 0 ; then
extra_objects="$extra_objects itbl-ops.o"
fi
;;
*)
;;
esac
# See if we really can support this configuration with the emulation code.
if test $this_target = $target ; then
primary_bfd_gas=$bfd_gas
obj_format=$fmt
gas_target=$targ
te_file=$em
if test $bfd_gas = no ; then
# Can't support other configurations this way.
break
fi
elif test $bfd_gas = no ; then
# Can't support this configuration.
break
fi
# From target name and format, produce a list of supported emulations.
case ${generic_target}-${fmt} in
mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
mips-*-linux*-*) case "$endian" in
big) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
*) emulation="mipslelf mipsbelf mipself mipslecoff mipsbecoff mipsecoff" ;;
esac ;;
mips-*-lnews*-ecoff) ;;
mips-*-*-ecoff) case "$endian" in
big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
*) emulation="mipslecoff mipsbecoff mipsecoff" ;;
esac ;;
mips-*-*-elf) case "$endian" in
big) emulation="mipsbelf mipslelf mipself" ;;
*) emulation="mipslelf mipsbelf mipself" ;;
# Uncommenting the next line will turn on support for i386 COFF
# in any i386 ELF configuration. This probably doesn't work
# correctly.
# i386-*-*-elf) emulation="i386coff i386elf" ;;
esac ;;
esac
emulations="$emulations $emulation"
done
# Assign floating point type. Most processors with FP support
# IEEE FP. On those that don't support FP at all, usually IEEE
# is emulated.
case ${target_cpu} in
vax | tahoe ) atof=${target_cpu} ;;
*) atof=ieee ;;
esac
case "${obj_format}" in
"") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
esac
dnl
dnl Make sure the desired support files exist.
dnl
if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
fi
if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
fi
# and target makefile frag
target_frag=${srcdir}/config/${gas_target}.mt
if test ! -r ${target_frag}; then
target_frag=/dev/null # ick! but subst_file can't be conditionalized
fi
AC_SUBST_FILE(target_frag)
case ${user_bfd_gas}-${primary_bfd_gas} in
yes-yes | no-no)
# We didn't override user's choice.
;;
no-yes)
AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
;;
no-preferred)
primary_bfd_gas=no
;;
*-preferred)
primary_bfd_gas=yes
;;
yes-*)
primary_bfd_gas=yes
;;
-*)
# User specified nothing.
;;
esac
# Some COFF configurations want these random other flags set.
case ${obj_format} in
coff)
case ${target_cpu_type} in
i386) AC_DEFINE(I386COFF) ;;
m68k) AC_DEFINE(M68KCOFF) ;;
m88k) AC_DEFINE(M88KCOFF) ;;
esac
;;
esac
# Getting this done right is going to be a bitch. Each configuration specified
# with --enable-targets=... should be checked for environment, format, cpu, and
# bfd_gas setting.
#
# For each configuration, the necessary object file support code must be linked
# in. This might be only one, it might be up to four. The necessary emulation
# code needs to be provided, too.
#
# And then there's "--enable-targets=all"....
#
# For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
formats="${obj_format}"
emfiles=""
EMULATIONS=""
GAS_UNIQ(emulations)
for em in . $emulations ; do
case $em in
.) continue ;;
mipsbelf | mipslelf)
fmt=elf file=mipself ;;
mipsbecoff | mipslecoff)
fmt=ecoff file=mipsecoff ;;
i386coff)
fmt=coff file=i386coff ;;
i386elf)
fmt=elf file=i386elf ;;
esac
formats="$formats $fmt"
emfiles="$emfiles e-$file.o"
EMULATIONS="$EMULATIONS &$em,"
done
GAS_UNIQ(formats)
GAS_UNIQ(emfiles)
if test `set . $formats ; shift ; echo $#` -gt 1 ; then
for fmt in $formats ; do
case $fmt in
aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
esac
extra_objects="$extra_objects obj-$fmt.o"
done
obj_format=multi
fi
if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
te_file=multi
extra_objects="$extra_objects $emfiles"
DEFAULT_EMULATION=`set . $emulations ; echo $2`
AC_DEFINE(USE_EMULATIONS)
fi
AC_SUBST(extra_objects)
AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
yes-*-coff) need_bfd=yes ;;
no-*-coff) need_bfd=yes
AC_DEFINE(MANY_SEGMENTS) ;;
esac
reject_dev_configs=yes
case ${reject_dev_configs}-${dev} in
yes-yes) # Oops.
AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
;;
esac
AC_SUBST(target_cpu_type)
AC_SUBST(obj_format)
AC_SUBST(te_file)
AC_SUBST(atof)
dnl AC_SUBST(emulation)
case "${primary_bfd_gas}" in
yes) AC_DEFINE(BFD_ASSEMBLER)
need_bfd=yes ;;
esac
# do we need the opcodes library?
case "${need_opcodes}" in
yes)
OPCODES_DEP=../opcodes/libopcodes.a
OPCODES_LIB='-L../opcodes -lopcodes'
# We need to handle some special cases for shared libraries.
case "${host}" in
*-*-sunos*)
# On SunOS, we must link against the name we are going to install,
# not -lbfd, since SunOS does not support SONAME.
if test "${shared_opcodes}" = "true"; then
OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
fi
;;
alpha*-*-osf*)
# On Alpha OSF/1, the native linker searches all the -L
# directories for any LIB.so files, and only then searches for any
# LIB.a files. That means that if there is an installed
# libbfd.so, but this build is not done with --enable-shared, the
# link will wind up being against the install libbfd.so rather
# than the newly built libbfd. To avoid this, we must explicitly
# link against libbfd.a when --enable-shared is not used.
if test "${shared_opcodes}" != "true"; then
OPCODES_LIB='../opcodes/libopcodes.a'
fi
;;
esac
;;
esac
case "${need_bfd}" in
yes)
BFDDEP=../bfd/libbfd.a
BFDLIB='-L../bfd -lbfd'
ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
# We need to handle some special cases for shared libraries
case "${host}" in
*-*-sunos*)
# On SunOS, we must link against the name we are going to install,
# not -lbfd, since SunOS does not support SONAME.
if test "${shared_bfd}" = "true"; then
BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
fi
;;
alpha*-*-osf*)
# On Alpha OSF/1, the native linker searches all the -L
# directories for any LIB.so files, and only then searches for any
# LIB.a files. That means that if there is an installed
# libbfd.so, but this build is not done with --enable-shared, the
# link will wind up being against the install libbfd.so rather
# than the newly built libbfd. To avoid this, we must explicitly
# link against libbfd.a when --enable-shared is not used.
if test "${shared_bfd}" != "true"; then
BFDLIB='../bfd/libbfd.a'
fi
;;
esac
if test "${commonbfdlib}" = "true"; then
# when a shared libbfd is built with --enable-commonbfdlib,
# all of libopcodes is available in libbfd.so
OPCODES_LIB=
fi
;;
esac
AC_SUBST(BFDDEP)
AC_SUBST(BFDLIB)
AC_SUBST(OPCODES_DEP)
AC_SUBST(OPCODES_LIB)
AC_SUBST(ALL_OBJ_DEPS)
AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
AC_PROG_CC
AC_PROG_INSTALL
AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
AC_MSG_CHECKING(whether compiling a cross-assembler)
if test "${host}" = "${target}"; then
cross_gas=no
else
cross_gas=yes
AC_DEFINE(CROSS_COMPILE)
fi
AC_MSG_RESULT($cross_gas)
dnl ansidecl.h will deal with const
dnl AC_CONST
AC_FUNC_ALLOCA
AC_C_INLINE
# VMS doesn't have unlink.
AC_CHECK_FUNCS(unlink remove, break)
# Some systems don't have sbrk().
AC_CHECK_FUNCS(sbrk)
# Some non-ANSI preprocessors botch requoting inside strings. That's bad
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
GAS_WORKING_ASSERT
# On some systems, the system header files may not declare malloc, realloc,
# and free. There are places where gas needs these functions to have been
# declared -- such as when taking their addresses.
gas_test_headers="
#ifdef HAVE_MEMORY_H
#include <memory.h>
#endif
#ifdef HAVE_STRING_H
#include <string.h>
#else
#ifdef HAVE_STRINGS_H
#include <strings.h>
#endif
#endif
#ifdef HAVE_STDLIB_H
#include <stdlib.h>
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
"
GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
# Does errno.h declare errno, or do we have to add a separate declaration
# for it?
GAS_CHECK_DECL_NEEDED(errno, f, int f, [
#ifdef HAVE_ERRNO_H
#include <errno.h>
#endif
])
HLDFLAGS=
HLDENV=
RPATH_ENVVAR=LD_LIBRARY_PATH
# If we have shared libraries, try to set rpath reasonably.
if test "${shared}" = "true"; then
case "${host}" in
*-*-hpux*)
HLDFLAGS='-Wl,+s,+b,$(libdir)'
RPATH_ENVVAR=SHLIB_PATH
;;
*-*-irix5* | *-*-irix6*)
HLDFLAGS='-Wl,-rpath,$(libdir)'
;;
*-*-linux*aout*)
;;
*-*-linux*)
HLDFLAGS='-Wl,-rpath,$(libdir)'
;;
*-*-solaris*)
HLDFLAGS='-R $(libdir)'
;;
*-*-sysv4*)
HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
;;
esac
fi
# On SunOS, if the linker supports the -rpath option, use it to
# prevent ../bfd and ../opcodes from being included in the run time
# search path.
case "${host}" in
*-*-sunos*)
echo 'main () { }' > conftest.c
${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
:
elif grep 'No such file' conftest.t >/dev/null 2>&1; then
:
elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
:
elif test "${shared}" = "true"; then
HLDFLAGS='-Wl,-rpath=$(libdir)'
else
HLDFLAGS='-Wl,-rpath='
fi
rm -f conftest.t conftest.c conftest
;;
esac
AC_SUBST(HLDFLAGS)
AC_SUBST(HLDENV)
AC_SUBST(RPATH_ENVVAR)
dnl This must come last.
dnl We used to make symlinks to files in the source directory, but now
dnl we just use the right name for .c files, and create .h files in
dnl the build directory which include the right .h file. Make sure
dnl the old symlinks don't exist, so that a reconfigure in an existing
dnl directory behaves reasonably.
AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in,
[rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
echo '#include "te-'"${te_file}"'.h"' > targ-env.h
echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
case ${target_cpu_type} in
m32r) echo '#include "opcodes/'"${target_cpu_type}"'-opc.h"' > cgen-opc.h ;;
esac],
[target_cpu_type=${target_cpu_type}
obj_format=${obj_format}
te_file=${te_file}])