binutils-gdb/gdb/configure.ac
Andrew Burgess 6aa4f97c2b gdb: print backtrace on fatal SIGSEGV
This commit adds a new maintenance feature, the ability to print
a (limited) backtrace if GDB dies due to a fatal signal.

The backtrace is produced using the backtrace and backtrace_symbols_fd
functions which are declared in the execinfo.h header, and both of
which are async signal safe.  A configure check has been added to
check for these features, if they are not available then the new code
is not compiled into GDB and the backtrace will not be printed.

The motivation for this new feature is to aid in debugging GDB in
situations where GDB has crashed at a users site, but the user is
reluctant to share core files, possibly due to concerns about what
might be in the memory image within the core file.  Such a user might
be happy to share a simple backtrace that was written to stderr.

The production of the backtrace is on by default, but can switched off
using the new commands:

  maintenance set backtrace-on-fatal-signal on|off
  maintenance show backtrace-on-fatal-signal

Right now, I have hooked this feature in to GDB's existing handling of
SIGSEGV only, but this will be extended to more signals in a later
commit.

One additional change I have made in this commit is that, when we
decide GDB should terminate due to the fatal signal, we now
raise the same fatal signal rather than raising SIGABRT.

Currently, this is only effecting our handling of SIGSEGV.  So,
previously, if GDB hit a SEGV then we would terminate GDB with a
SIGABRT.  After this commit we will terminate GDB with a SIGSEGV.

This feels like an improvement to me, we should still get a core dump,
but in many shells, the user will see a more specific message once GDB
exits, in bash for example "Segmentation fault" rather than "Aborted".

Finally then, here is an example of the output a user would see if GDB
should hit an internal SIGSEGV:

  Fatal signal: Segmentation fault
  ----- Backtrace -----
  ./gdb/gdb[0x8078e6]
  ./gdb/gdb[0x807b20]
  /lib64/libpthread.so.0(+0x14b20)[0x7f6648c92b20]
  /lib64/libc.so.6(__poll+0x4f)[0x7f66484d3a5f]
  ./gdb/gdb[0x1540f4c]
  ./gdb/gdb[0x154034a]
  ./gdb/gdb[0x9b002d]
  ./gdb/gdb[0x9b014d]
  ./gdb/gdb[0x9b1aa6]
  ./gdb/gdb[0x9b1b0c]
  ./gdb/gdb[0x41756d]
  /lib64/libc.so.6(__libc_start_main+0xf3)[0x7f66484041a3]
  ./gdb/gdb[0x41746e]
  ---------------------
  A fatal error internal to GDB has been detected, further
  debugging is not possible.  GDB will now terminate.

  This is a bug, please report it.  For instructions, see:
  <https://www.gnu.org/software/gdb/bugs/>.

  Segmentation fault (core dumped)

It is disappointing that backtrace_symbols_fd does not actually map
the addresses back to symbols, this appears, in part, to be due to GDB
not being built with -rdynamic as the manual page for
backtrace_symbols_fd suggests, however, even when I do add -rdynamic
to the build of GDB I only see symbols for some addresses.

We could potentially look at alternative libraries to provide the
backtrace (e.g. libunwind) however, the solution presented here, which
is available as part of glibc is probably a good baseline from which
we might improve things in future.
2021-08-11 12:35:14 +01:00

2263 lines
70 KiB
Plaintext

dnl Autoconf configure script for GDB, the GNU debugger.
dnl Copyright (C) 1995-2021 Free Software Foundation, Inc.
dnl
dnl This file is part of GDB.
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 3 of the License, or
dnl (at your option) any later version.
dnl
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
dnl GNU General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
dnl Process this file with autoconf to produce a configure script.
AC_INIT
AC_CONFIG_MACRO_DIRS([../config])
AC_CONFIG_SRCDIR([main.c])
AC_CONFIG_HEADERS(config.h:config.in, [echo > stamp-h])
AM_MAINTAINER_MODE
AC_PROG_CC
AC_PROG_CXX
AC_USE_SYSTEM_EXTENSIONS
ACX_LARGEFILE
AM_PROG_INSTALL_STRIP
AC_CONFIG_AUX_DIR(..)
# Set build, build_cpu, build_vendor and build_os.
AC_CANONICAL_BUILD
# Set host, host_cpu, host_vendor, and host_os.
AC_CANONICAL_HOST
# Set target, target_cpu, target_vendor, and target_os.
AC_CANONICAL_TARGET
ACX_NONCANONICAL_TARGET
AC_ARG_PROGRAM
# We require a C++11 compiler. Check if one is available, and if
# necessary, set CXX_DIALECT to some -std=xxx switch.
AX_CXX_COMPILE_STDCXX(11, , mandatory)
# Dependency checking.
ZW_CREATE_DEPDIR
ZW_PROG_COMPILER_DEPENDENCIES([CC])
dnl List of object files and targets accumulated by configure.
CONFIG_OBS=
CONFIG_DEPS=
CONFIG_SRCS=
ENABLE_CFLAGS=
CONFIG_ALL=
CONFIG_CLEAN=
CONFIG_INSTALL=
CONFIG_UNINSTALL=
dnl Set up for gettext.
ZW_GNU_GETTEXT_SISTER_DIR
localedir='${datadir}/locale'
AC_SUBST(localedir)
if test x"$USE_NLS" = xyes; then
CONFIG_ALL="$CONFIG_ALL all-po"
CONFIG_CLEAN="$CONFIG_CLEAN clean-po"
CONFIG_INSTALL="$CONFIG_INSTALL install-po"
CONFIG_UNINSTALL="$CONFIG_UNINSTALL uninstall-po"
fi
PACKAGE=gdb
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of this package. ])
AC_SUBST(PACKAGE)
# We never need to detect it in this sub-configure.
# But preserve it for config.status --recheck.
AC_ARG_VAR(MAKEINFO,
[Parent configure detects if it is of sufficient version.])
AC_ARG_VAR(MAKEINFOFLAGS,
[Parameters for MAKEINFO.])
MAKEINFO_EXTRA_FLAGS=""
AC_CACHE_CHECK([whether $MAKEINFO supports @click], gdb_cv_have_makeinfo_click,
[echo '@clicksequence{a @click{} b}' >conftest.texinfo
if eval "$MAKEINFO conftest.texinfo >&5 2>&5"; then
gdb_cv_have_makeinfo_click=yes
else
gdb_cv_have_makeinfo_click=no
fi])
if test x"$gdb_cv_have_makeinfo_click" = xyes; then
MAKEINFO_EXTRA_FLAGS="$MAKEINFO_EXTRA_FLAGS -DHAVE_MAKEINFO_CLICK"
fi
AC_SUBST(MAKEINFO_EXTRA_FLAGS)
GDB_AC_WITH_DIR(DEBUGDIR, separate-debug-dir,
[look for global separate debug info in this path @<:@LIBDIR/debug@:>@],
[${libdir}/debug])
# We can't pass paths as command line arguments.
# Mingw32 tries to be clever and will convert the paths for us.
# For example -DBINDIR="/usr/local/bin" passed on the command line may get
# converted to -DBINDIR="E:/msys/mingw32/msys/1.0/local/bin".
# This breaks GDB's relocatable path conversions since paths passed in
# config.h would not get so translated, the path prefixes no longer match.
AC_DEFINE_DIR(BINDIR, bindir, [Directory of programs.])
# GDB's datadir relocation
GDB_AC_WITH_DIR(GDB_DATADIR, gdb-datadir,
[look for global separate data files in this path @<:@DATADIR/gdb@:>@],
[${datadir}/gdb])
AC_ARG_WITH(relocated-sources,
AS_HELP_STRING([--with-relocated-sources=PATH], [automatically relocate this path for source files]),
[reloc_srcdir="${withval}"
AC_DEFINE_DIR(RELOC_SRCDIR, reloc_srcdir,
[Relocated directory for source files. ])
])
AC_MSG_CHECKING([for default auto-load directory])
AC_ARG_WITH(auto-load-dir,
AS_HELP_STRING([--with-auto-load-dir=PATH],
[directories from which to load auto-loaded scripts @<:@$debugdir:$datadir/auto-load@:>@]),,
[with_auto_load_dir='$debugdir:$datadir/auto-load'])
escape_dir=`echo $with_auto_load_dir | sed -e 's/[[$]]datadir\>/\\\\\\\\\\\\&/g' -e 's/[[$]]debugdir\>/\\\\\\\\\\\\&/g'`
AC_DEFINE_DIR(AUTO_LOAD_DIR, escape_dir,
[Directories from which to load auto-loaded scripts.])
AC_MSG_RESULT([$with_auto_load_dir])
AC_MSG_CHECKING([for default auto-load safe-path])
AC_ARG_WITH(auto-load-safe-path,
AS_HELP_STRING([--with-auto-load-safe-path=PATH],
[directories safe to hold auto-loaded files @<:@--with-auto-load-dir@:>@])
AS_HELP_STRING([--without-auto-load-safe-path],
[do not restrict auto-loaded files locations]),
[if test "$with_auto_load_safe_path" = "no"; then
with_auto_load_safe_path="/"
fi],
[with_auto_load_safe_path="$with_auto_load_dir"])
escape_dir=`echo $with_auto_load_safe_path | sed -e 's/[[$]]datadir\>/\\\\\\\\\\\\&/g' -e 's/[[$]]debugdir\>/\\\\\\\\\\\\&/g'`
AC_DEFINE_DIR(AUTO_LOAD_SAFE_PATH, escape_dir,
[Directories safe to hold auto-loaded files.])
AC_MSG_RESULT([$with_auto_load_safe_path])
AC_CONFIG_SUBDIRS(testsuite)
# Check whether to support alternative target configurations
AC_ARG_ENABLE(targets,
AS_HELP_STRING([--enable-targets=TARGETS], [alternative target configurations]),
[case "${enableval}" in
yes | "") AC_MSG_ERROR(enable-targets option must specify target names or 'all')
;;
no) enable_targets= ;;
*) enable_targets=$enableval ;;
esac])
# Check whether to enable 64-bit support on 32-bit hosts
AC_ARG_ENABLE(64-bit-bfd,
AS_HELP_STRING([--enable-64-bit-bfd], [64-bit support (on hosts with narrower word sizes)]),
[case "${enableval}" in
yes) want64=true ;;
no) want64=false ;;
*) AC_MSG_ERROR(bad value ${enableval} for 64-bit-bfd option) ;;
esac],[want64=false])dnl
# Provide defaults for some variables set by the per-host and per-target
# configuration.
gdb_host_obs=posix-hdep.o
if test "${target}" = "${host}"; then
gdb_native=yes
else
gdb_native=no
fi
. $srcdir/configure.host
# Accumulate some settings from configure.tgt over all enabled targets
TARGET_OBS=
all_targets=
HAVE_NATIVE_GCORE_TARGET=
for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
do
if test "$targ_alias" = "all"; then
all_targets=true
else
# Canonicalize the secondary target names.
result=`$ac_config_sub $targ_alias 2>/dev/null`
if test -n "$result"; then
targ=$result
else
targ=$targ_alias
fi
. ${srcdir}/configure.tgt
AS_IF([test -z "${gdb_target_obs}"],
[AC_MSG_ERROR([configuration ${targ} is unsupported.])])
# Target-specific object files
for i in ${gdb_target_obs}; do
case " $TARGET_OBS " in
*" ${i} "*) ;;
*)
TARGET_OBS="$TARGET_OBS ${i}"
;;
esac
done
# Check whether this target needs 64-bit CORE_ADDR
if test x${want64} = xfalse; then
. ${srcdir}/../bfd/config.bfd
fi
# Check whether this target is native and supports gcore.
if test $gdb_native = yes -a "$targ_alias" = "$target_alias" \
&& $gdb_have_gcore; then
HAVE_NATIVE_GCORE_TARGET=1
fi
fi
done
if test x${all_targets} = xtrue; then
# We want all 64-bit targets if we either:
# - run on a 64-bit host or
# - already require 64-bit support for some other target or
# - the --enable-64-bit-bfd option was supplied
# Otherwise we only support all 32-bit targets.
#
# NOTE: This test must be in sync with the corresponding
# tests in BFD!
if test x${want64} = xfalse; then
AC_CHECK_SIZEOF(long)
if test "x${ac_cv_sizeof_long}" = "x8"; then
want64=true
fi
fi
if test x${want64} = xtrue; then
TARGET_OBS='$(ALL_TARGET_OBS) $(ALL_64_TARGET_OBS)'
else
TARGET_OBS='$(ALL_TARGET_OBS)'
fi
fi
AC_SUBST(TARGET_OBS)
AC_SUBST(HAVE_NATIVE_GCORE_TARGET)
# For other settings, only the main target counts.
gdb_sim=
gdb_osabi=
targ=$target; . ${srcdir}/configure.tgt
# Fetch the default architecture and default target vector from BFD.
targ=$target; . $srcdir/../bfd/config.bfd
# We only want the first architecture, so strip off the others if
# there is more than one.
targ_archs=`echo $targ_archs | sed 's/ .*//'`
if test "x$targ_archs" != x; then
AC_DEFINE_UNQUOTED(DEFAULT_BFD_ARCH, $targ_archs,
[Define to BFD's default architecture. ])
fi
if test "x$targ_defvec" != x; then
AC_DEFINE_UNQUOTED(DEFAULT_BFD_VEC, $targ_defvec,
[Define to BFD's default target vector. ])
fi
# Enable MI.
AC_ARG_ENABLE(gdbmi,
AS_HELP_STRING([--disable-gdbmi], [disable machine-interface (MI)]),
[case $enableval in
yes | no)
;;
*)
AC_MSG_ERROR([bad value $enableval for --enable-gdbmi]) ;;
esac],
[enable_gdbmi=yes])
if test x"$enable_gdbmi" = xyes; then
if test -d "$srcdir/mi"; then
CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_MI_OBS)"
CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_MI_DEPS)"
CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_MI_SRCS)"
ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_MI_CFLAGS)"
fi
fi
# Enable TUI.
AC_ARG_ENABLE(tui,
AS_HELP_STRING([--enable-tui], [enable full-screen terminal user interface (TUI)]),
[case $enableval in
yes | no | auto)
;;
*)
AC_MSG_ERROR([bad value $enableval for --enable-tui]) ;;
esac],enable_tui=auto)
# Enable gdbtk.
AC_ARG_ENABLE(gdbtk,
AS_HELP_STRING([--enable-gdbtk], [enable gdbtk graphical user interface (GUI)]),
[case $enableval in
yes | no)
;;
*)
AC_MSG_ERROR([bad value $enableval for --enable-gdbtk]) ;;
esac],
[if test -d "$srcdir/gdbtk"; then
enable_gdbtk=yes
else
enable_gdbtk=no
fi])
# We unconditionally disable gdbtk tests on selected platforms.
case $host_os in
go32* | windows*)
AC_MSG_WARN([gdbtk isn't supported on $host; disabling])
enable_gdbtk=no ;;
esac
# Handle optional debuginfod support
AC_DEBUGINFOD
# Libunwind support for ia64.
AC_ARG_WITH(libunwind-ia64,
AS_HELP_STRING([--with-libunwind-ia64],
[use libunwind frame unwinding for ia64 targets]),,
[with_libunwind_ia64=auto])
# Backward compatibility option.
if test "${with_libunwind+set}" = set; then
if test x"$with_libunwind_ia64" != xauto; then
AC_MSG_ERROR(
[option --with-libunwind is deprecated, use --with-libunwind-ia64])
fi
AC_MSG_WARN([option --with-libunwind is deprecated, use --with-libunwind-ia64])
with_libunwind_ia64="$with_libunwind"
fi
case "$with_libunwind_ia64" in
yes | no)
;;
auto)
AC_CHECK_HEADERS(libunwind-ia64.h)
with_libunwind_ia64=$ac_cv_header_libunwind_ia64_h
;;
*)
AC_MSG_ERROR(
[bad value $with_libunwind_ia64 for GDB --with-libunwind-ia64 option])
;;
esac
if test x"$with_libunwind_ia64" = xyes; then
AC_CHECK_HEADERS(libunwind-ia64.h)
if test x"$ac_cv_header_libunwind_ia64_h" != xyes; then
AC_MSG_ERROR([GDB option --with-libunwind-ia64 requires libunwind-ia64.h])
fi
CONFIG_OBS="$CONFIG_OBS ia64-libunwind-tdep.o"
CONFIG_DEPS="$CONFIG_DEPS ia64-libunwind-tdep.o"
CONFIG_SRCS="$CONFIG_SRCS ia64-libunwind-tdep.c"
fi
opt_curses=no
AC_ARG_WITH(curses, AS_HELP_STRING([--with-curses], [use the curses library instead of the termcap library]), opt_curses=$withval)
prefer_curses=no
if test "$opt_curses" = "yes"; then
prefer_curses=yes
fi
# Profiling support.
AC_ARG_ENABLE(profiling,
AS_HELP_STRING([--enable-profiling], [enable profiling of GDB]),
[case $enableval in
yes | no)
;;
*)
AC_MSG_ERROR([bad value $enableval for --enable-profile]) ;;
esac],
[enable_profiling=no])
AC_CHECK_FUNCS(monstartup _mcleanup)
AC_CACHE_CHECK(
[for _etext],
[ac_cv_var__etext],
[AC_LINK_IFELSE(
[AC_LANG_PROGRAM(
[#include <stdlib.h>
extern char _etext;],
[free (&_etext);]
)],
[ac_cv_var__etext=yes],
[ac_cv_var__etext=no]
)]
)
if test "$ac_cv_var__etext" = yes; then
AC_DEFINE(HAVE__ETEXT, 1,
[Define to 1 if your system has the _etext variable. ])
fi
AC_CACHE_CHECK(
[for etext],
[ac_cv_var_etext],
[AC_LINK_IFELSE(
[AC_LANG_PROGRAM(
[#include <stdlib.h>
extern char etext;],
[free (&etext);]
)],
[ac_cv_var_etext=yes],
[ac_cv_var_etext=no]
)]
)
if test "$ac_cv_var_etext" = yes; then
AC_DEFINE(HAVE_ETEXT, 1,
[Define to 1 if your system has the etext variable. ])
fi
if test "$enable_profiling" = yes ; then
if test "$ac_cv_func_monstartup" = no || test "$ac_cv_func__mcleanup" = no; then
AC_MSG_ERROR(--enable-profiling requires monstartup and _mcleanup)
fi
PROFILE_CFLAGS=-pg
OLD_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $PROFILE_CFLAGS"
AC_CACHE_CHECK(
[whether $CC supports -pg],
[ac_cv_cc_supports_pg],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM([], [int x;])],
[ac_cv_cc_supports_pg=yes],
[ac_cv_cc_supports_pg=no]
)]
)
if test "$ac_cv_cc_supports_pg" = no; then
AC_MSG_ERROR(--enable-profiling requires a compiler which supports -pg)
fi
CFLAGS="$OLD_CFLAGS"
fi
CODESIGN_CERT=
AC_ARG_ENABLE([codesign],
AS_HELP_STRING([--enable-codesign=CERT],
[sign gdb with 'codesign -s CERT']),
[CODESIGN_CERT=$enableval])
AC_SUBST([CODESIGN_CERT])
ACX_PKGVERSION([GDB])
ACX_BUGURL([https://www.gnu.org/software/gdb/bugs/])
AC_DEFINE_UNQUOTED([PKGVERSION], ["$PKGVERSION"], [Additional package description])
AC_DEFINE_UNQUOTED([REPORT_BUGS_TO], ["$REPORT_BUGS_TO"], [Bug reporting address])
# --------------------- #
# Checks for programs. #
# --------------------- #
AC_PROG_AWK
AC_PROG_INSTALL
AC_PROG_LN_S
AC_PROG_RANLIB
AC_PROG_YACC
AC_CHECK_TOOL(AR, ar)
AC_CHECK_TOOL(DLLTOOL, dlltool)
AC_CHECK_TOOL(WINDRES, windres)
case $host_os in
gnu*)
# Needed for GNU Hurd hosts.
AC_CHECK_TOOL(MIG, mig)
if test x"$MIG" = x; then
AC_MSG_ERROR([MIG not found but required for $host hosts])
fi
;;
esac
# ---------------------- #
# Checks for libraries. #
# ---------------------- #
# We might need to link with -lm; most simulators need it.
AC_CHECK_LIB(m, main)
# Some systems (e.g. Solaris) have `gethostbyname' in libnsl.
AC_SEARCH_LIBS(gethostbyname, nsl)
# Some systems (e.g. Solaris) have `socketpair' in libsocket.
AC_SEARCH_LIBS(socketpair, socket)
# Link in zlib if we can. This allows us to read compressed debug sections.
AM_ZLIB
AM_ICONV
# GDB may fork/exec the iconv program to get the list of supported character
# sets. Allow the user to specify where to find it.
# There are several factors affecting the choice of option name:
# - There is already --with-libiconv-prefix but we can't use it, it specifies
# the build-time location of libiconv files.
# - The program we need to find is iconv, which comes with glibc. The user
# doesn't necessarily have libiconv installed. Therefore naming this
# --with-libiconv-foo feels wrong.
# - We want the path to be relocatable, but GDB_AC_DEFINE_RELOCATABLE is
# defined to work on directories not files (though it really doesn't know
# the difference).
# - Calling this --with-iconv-prefix is perceived to cause too much confusion
# with --with-libiconv-prefix.
# Putting these together is why the option name is --with-iconv-bin.
AC_ARG_WITH(iconv-bin,
AS_HELP_STRING([--with-iconv-bin=PATH], [specify where to find the iconv program]),
[iconv_bin="${withval}"
AC_DEFINE_UNQUOTED([ICONV_BIN], ["${iconv_bin}"],
[Path of directory of iconv program.])
GDB_AC_DEFINE_RELOCATABLE(ICONV_BIN, iconv, ${iconv_bin})
])
# For the TUI, we need enhanced curses functionality.
if test x"$enable_tui" != xno; then
prefer_curses=yes
fi
curses_found=no
if test x"$prefer_curses" = xyes; then
# FIXME: kettenis/20040905: We prefer ncurses over the vendor-supplied
# curses library because the latter might not provide all the
# functionality we need. However, this leads to problems on systems
# where the linker searches /usr/local/lib, but the compiler doesn't
# search /usr/local/include, if ncurses is installed in /usr/local. A
# default installation of ncurses on alpha*-dec-osf* will lead to such
# a situation.
AC_SEARCH_LIBS(waddstr, [ncursesw ncurses cursesX curses])
if test "$ac_cv_search_waddstr" != no; then
curses_found=yes
fi
fi
# Check whether we should enable the TUI, but only do so if we really
# can.
if test x"$enable_tui" != xno; then
if test -d "$srcdir/tui"; then
if test "$curses_found" != no; then
CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_TUI_OBS)"
CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_TUI_DEPS)"
CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_TUI_SRCS)"
ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_TUI_CFLAGS)"
else
if test x"$enable_tui" = xyes; then
AC_MSG_ERROR([no enhanced curses library found; disable TUI])
else
AC_MSG_WARN([no enhanced curses library found; disabling TUI])
fi
fi
fi
fi
# Since GDB uses Readline, we need termcap functionality. In many
# cases this will be provided by the curses library, but some systems
# have a separate termcap library, or no curses library at all.
case $host_os in
cygwin*)
if test -d "$srcdir/libtermcap"; then
LIBS="../libtermcap/libtermcap.a $LIBS"
ac_cv_search_tgetent="../libtermcap/libtermcap.a"
fi ;;
go32* | *djgpp*)
ac_cv_search_tgetent="none required"
;;
esac
# These are the libraries checked by Readline.
AC_SEARCH_LIBS(tgetent, [termcap tinfow tinfo curses ncursesw ncurses])
if test "$ac_cv_search_tgetent" = no; then
CONFIG_OBS="$CONFIG_OBS stub-termcap.o"
fi
AC_ARG_WITH([system-readline],
[AS_HELP_STRING([--with-system-readline],
[use installed readline library])])
if test "$with_system_readline" = yes; then
AC_CACHE_CHECK(
[whether system readline is new enough],
[gdb_cv_readline_ok],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <stdio.h>
#include <readline/readline.h>],
[#if RL_VERSION_MAJOR < 7
# error "readline version 7 required"
#endif]
)],
[gdb_cv_readline_ok=yes],
[gdb_cv_readline_ok=no]
)]
)
if test "$gdb_cv_readline_ok" != yes; then
AC_MSG_ERROR([system readline is not new enough])
fi
READLINE=-lreadline
READLINE_DEPS=
READLINE_CFLAGS=
READLINE_TEXI_INCFLAG=
else
READLINE='$(READLINE_DIR)/libreadline.a'
READLINE_DEPS='$(READLINE)'
READLINE_CFLAGS='-I$(READLINE_SRC)/..'
READLINE_TEXI_INCFLAG='-I $(READLINE_DIR)'
fi
AC_SUBST(READLINE)
AC_SUBST(READLINE_DEPS)
AC_SUBST(READLINE_CFLAGS)
AC_SUBST(READLINE_TEXI_INCFLAG)
# Generate jit-reader.h
# This is typedeffed to GDB_CORE_ADDR in jit-reader.h
TARGET_PTR=
AC_CHECK_SIZEOF(unsigned long long)
AC_CHECK_SIZEOF(unsigned long)
AC_CHECK_SIZEOF(unsigned __int128)
if test "x${ac_cv_sizeof_unsigned_long}" = "x8"; then
TARGET_PTR="unsigned long"
elif test "x${ac_cv_sizeof_unsigned_long_long}" = "x8"; then
TARGET_PTR="unsigned long long"
elif test "x${ac_cv_sizeof_unsigned___int128}" = "x16"; then
TARGET_PTR="unsigned __int128"
else
TARGET_PTR="unsigned long"
fi
AC_SUBST(TARGET_PTR)
AC_CONFIG_FILES([jit-reader.h:jit-reader.in])
AC_SEARCH_LIBS(dlopen, dl)
GDB_AC_WITH_DIR([JIT_READER_DIR], [jit-reader-dir],
[directory to load the JIT readers from],
[${libdir}/gdb])
AC_ARG_WITH(expat,
AS_HELP_STRING([--with-expat], [include expat support (auto/yes/no)]),
[], [with_expat=auto])
AC_MSG_CHECKING([whether to use expat])
AC_MSG_RESULT([$with_expat])
if test "${with_expat}" = no; then
AC_MSG_WARN([expat support disabled; some features may be unavailable.])
HAVE_LIBEXPAT=no
else
AC_LIB_HAVE_LINKFLAGS([expat], [], [#include "expat.h"],
[XML_Parser p = XML_ParserCreate (0);])
if test "$HAVE_LIBEXPAT" != yes; then
if test "$with_expat" = yes; then
AC_MSG_ERROR([expat is missing or unusable])
else
AC_MSG_WARN([expat is missing or unusable; some features may be unavailable.])
fi
else
save_LIBS=$LIBS
LIBS="$LIBS $LIBEXPAT"
AC_CHECK_FUNCS(XML_StopParser)
LIBS=$save_LIBS
fi
fi
# Verify that we have a usable GMP library.
AC_LIB_HAVE_LINKFLAGS([gmp], [], [#include <gmp.h>],
[mpz_t n;
mpz_init (n);])
if test "$HAVE_LIBGMP" != yes; then
AC_MSG_ERROR([GMP is missing or unusable])
fi
AC_ARG_WITH(mpfr,
AS_HELP_STRING([--with-mpfr], [include MPFR support (auto/yes/no)]),
[], [with_mpfr=auto])
AC_MSG_CHECKING([whether to use MPFR])
AC_MSG_RESULT([$with_mpfr])
if test "${with_mpfr}" = no; then
AC_MSG_WARN([MPFR support disabled; some features may be unavailable.])
HAVE_LIBMPFR=no
else
AC_LIB_HAVE_LINKFLAGS([mpfr], [gmp], [#include <mpfr.h>],
[mpfr_exp_t exp; mpfr_t x;
mpfr_frexp (&exp, x, x, MPFR_RNDN);])
if test "$HAVE_LIBMPFR" != yes; then
if test "$with_mpfr" = yes; then
AC_MSG_ERROR([MPFR is missing or unusable])
else
AC_MSG_WARN([MPFR is missing or unusable; some features may be unavailable.])
fi
fi
fi
# --------------------- #
# Check for libpython. #
# --------------------- #
dnl Utility to simplify finding libpython.
dnl $1 = the shell variable to assign the result to
dnl If libpython is found we store $version here.
dnl $2 = additional flags to add to CPPFLAGS
dnl $3 = additional flags to add to LIBS
AC_DEFUN([AC_TRY_LIBPYTHON],
[
define([have_libpython_var],$1)
new_CPPFLAGS=$2
new_LIBS=$3
AC_MSG_CHECKING([for python])
save_CPPFLAGS=$CPPFLAGS
save_LIBS=$LIBS
CPPFLAGS="$CPPFLAGS $new_CPPFLAGS"
LIBS="$new_LIBS $LIBS"
found_usable_python=no
AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include "Python.h"]],
[[Py_Initialize ();]])],
[have_libpython_var=yes
found_usable_python=yes
PYTHON_CPPFLAGS=$new_CPPFLAGS
PYTHON_LIBS=$new_LIBS])
CPPFLAGS=$save_CPPFLAGS
LIBS=$save_LIBS
AC_MSG_RESULT([${found_usable_python}])
])
dnl There are several different values for --with-python:
dnl
dnl no - Don't include python support.
dnl yes - Include python support, error if it's missing.
dnl If we find python in $PATH, use it to fetch configure options,
dnl otherwise assume the compiler can find it with no help from us.
dnl Python 2.7 and 2.6 are tried in turn.
dnl auto - Same as "yes", but if python is missing from the system,
dnl fall back to "no".
dnl /path/to/python/exec-prefix -
dnl Use the python located in this directory.
dnl If /path/to/python/exec-prefix/bin/python exists, use it to find
dnl the compilation parameters. Otherwise use
dnl -I/path/to/python/exec-prefix/include,
dnl -L/path/to/python/exec-prefix/lib.
dnl Python 2.7 and 2.6 are tried in turn.
dnl NOTE: This case is historical. It is what was done for 7.0/7.1
dnl but is deprecated.
dnl /path/to/python/executable -
dnl Run python-config.py with this version of python to fetch the
dnl compilation parameters.
dnl NOTE: This needn't be the real python executable.
dnl In a cross-compilation scenario (build != host), this could be
dnl a shell script that provides what python-config.py provides for
dnl --ldflags, --includes, --exec-prefix.
dnl python-executable -
dnl Find python-executable in $PATH, and then handle the same as
dnl /path/to/python/executable.
dnl
dnl If a python program is specified, it is used to run python-config.py and
dnl is passed --ldflags, --includes, --exec-prefix.
AC_ARG_WITH(python,
AS_HELP_STRING([--with-python@<:@=PYTHON@:>@], [include python support (auto/yes/no/<python-program>)]),
[], [with_python=auto])
AC_MSG_CHECKING([whether to use python])
AC_MSG_RESULT([$with_python])
if test "${with_python}" = no; then
AC_MSG_WARN([python support disabled; some features may be unavailable.])
have_libpython=no
else
case "${with_python}" in
[[\\/]]* | ?:[[\\/]]*)
if test -d "${with_python}"; then
# Assume the python binary is ${with_python}/bin/python.
python_prog="${with_python}/bin/python"
python_prefix=
# If python does not exit ${with_python}/bin, then try in
# ${with_python}. On Windows/MinGW, this is where the Python
# executable is.
if test ! -x "${python_prog}"; then
python_prog="${with_python}/python"
python_prefix=
fi
if test ! -x "${python_prog}"; then
# Fall back to gdb 7.0/7.1 behaviour.
python_prog=missing
python_prefix=${with_python}
fi
elif test -x "${with_python}"; then
# While we can't run python compiled for $host (unless host == build),
# the user could write a script that provides the needed information,
# so we support that.
python_prog=${with_python}
python_prefix=
else
AC_MSG_ERROR(invalid value for --with-python)
fi
;;
*/*)
# Disallow --with-python=foo/bar.
AC_MSG_ERROR(invalid value for --with-python)
;;
*)
# The user has either specified auto, yes, or the name of the python
# program assumed to be in $PATH.
python_prefix=
case "${with_python}" in
yes | auto)
if test "${build}" = "${host}"; then
AC_PATH_PROG(python_prog_path, python, missing)
if test "${python_prog_path}" = missing; then
python_prog=missing
else
python_prog=${python_prog_path}
fi
else
# Not much we can do except assume the cross-compiler will find the
# right files.
python_prog=missing
fi
;;
*)
# While we can't run python compiled for $host (unless host == build),
# the user could write a script that provides the needed information,
# so we support that.
python_prog="${with_python}"
AC_PATH_PROG(python_prog_path, ${python_prog}, missing)
if test "${python_prog_path}" = missing; then
AC_MSG_ERROR(unable to find python program ${python_prog})
fi
;;
esac
esac
if test "${python_prog}" != missing; then
# We have a python program to use, but it may be too old.
# Don't flag an error for --with-python=auto (the default).
have_python_config=yes
python_includes=`${python_prog} ${srcdir}/python/python-config.py --includes`
if test $? != 0; then
have_python_config=failed
if test "${with_python}" != auto; then
AC_MSG_ERROR(failure running python-config --includes)
fi
fi
python_libs=`${python_prog} ${srcdir}/python/python-config.py --ldflags`
if test $? != 0; then
have_python_config=failed
if test "${with_python}" != auto; then
AC_MSG_ERROR(failure running python-config --ldflags)
fi
fi
python_prefix=`${python_prog} ${srcdir}/python/python-config.py --exec-prefix`
if test $? != 0; then
have_python_config=failed
if test "${with_python}" != auto; then
AC_MSG_ERROR(failure running python-config --exec-prefix)
fi
fi
else
# We do not have a python executable we can use to determine where
# to find the Python headers and libs. We cannot guess the include
# path from the python_prefix either, because that include path
# depends on the Python version. So, there is nothing much we can
# do except assume that the compiler will be able to find those files.
python_includes=
python_libs=
have_python_config=no
fi
# If we have python-config, only try the configuration it provides.
# Otherwise fallback on the old way of trying different versions of
# python in turn.
have_libpython=no
if test "${have_python_config}" = yes; then
AC_TRY_LIBPYTHON(have_libpython,
${python_includes}, ${python_libs})
elif test "${have_python_config}" != failed; then
if test "${have_libpython}" = no; then
AC_TRY_LIBPYTHON(have_libpython,
${python_includes}, "-lpython2.7 ${python_libs}")
fi
if test "${have_libpython}" = no; then
AC_TRY_LIBPYTHON(have_libpython,
${python_includes}, "-lpython2.6 ${python_libs}")
fi
fi
if test "${have_libpython}" = no; then
case "${with_python}" in
yes)
AC_MSG_ERROR([python is missing or unusable])
;;
auto)
AC_MSG_WARN([python is missing or unusable; some features may be unavailable.])
;;
*)
AC_MSG_ERROR([no usable python found at ${with_python}])
;;
esac
else
if test -n "${python_prefix}"; then
AC_DEFINE_UNQUOTED(WITH_PYTHON_PATH, "${python_prefix}",
[Define if --with-python provides a path, either directly or via python-config.py --exec-prefix.])
GDB_AC_DEFINE_RELOCATABLE(PYTHON_PATH, python, ${python_prefix})
fi
fi
fi
dnl Use --with-python-libdir to control where GDB looks for the Python
dnl libraries.
dnl
dnl If this is not given then the default will be based on the value
dnl passed to --with-python, which is in the python_prefix variable.
dnl If the --with-python option wasn't given then the default value in
dnl python_prefix is based on running the 'gdb/python/python-config
dnl --exec-prefix' script.
AC_ARG_WITH(python-libdir,
AS_HELP_STRING([--with-python-libdir@<:@=DIR@:>@], [search for python's libraries in DIR]),
[],[
# If no python libdir is specified then select one based on
# python's prefix path.
if test -n "${python_prefix}"; then
with_python_libdir=${python_prefix}/lib
fi
])
if test "${have_libpython}" != no; then
AC_DEFINE(HAVE_PYTHON, 1, [Define if Python interpreter is being linked in.])
CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_PYTHON_OBS)"
CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_PYTHON_DEPS)"
CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_PYTHON_SRCS)"
CONFIG_INSTALL="$CONFIG_INSTALL install-python"
ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_PYTHON_CFLAGS)"
if test -n "${with_python_libdir}"; then
AC_DEFINE_UNQUOTED(WITH_PYTHON_LIBDIR, "${with_python_libdir}",
[Directory containing Python's standard libraries from --with-python-libdir.])
GDB_AC_DEFINE_RELOCATABLE(PYTHON_LIBDIR, [python lib], ${with_python_libdir})
fi
# Flags needed to compile Python code (taken from python-config --cflags).
# We cannot call python-config directly because it will output whatever was
# used when compiling the Python interpreter itself, including flags which
# would make the python-related objects be compiled differently from the
# rest of GDB (e.g., -O2 and -fPIC).
if test "${GCC}" = yes; then
tentative_python_cflags="-fno-strict-aliasing -fwrapv"
# Python headers recommend -DNDEBUG, but it's unclear if that just
# refers to building Python itself. In release mode, though, it
# doesn't hurt for the Python code in gdb to follow.
$development || tentative_python_cflags="$tentative_python_cflags -DNDEBUG"
fi
if test "x${tentative_python_cflags}" != x; then
AC_MSG_CHECKING(compiler flags for python code)
for flag in ${tentative_python_cflags}; do
# Check that the compiler accepts it
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $flag"
AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM([], [])],
[PYTHON_CFLAGS="${PYTHON_CFLAGS} $flag"],
[]
)
CFLAGS="$saved_CFLAGS"
done
AC_MSG_RESULT(${PYTHON_CFLAGS})
fi
# On x64 Windows, Python's include headers, and pyconfig.h in
# particular, rely on MS_WIN64 macro to detect that it's a 64bit
# version of Windows. Unfortunately, MS_WIN64 is only defined if
# _MSC_VER, a Microsoft-specific macro, is defined. So, when
# building on x64 Windows with GCC, we define MS_WIN64 ourselves.
# The issue was reported to the Python community, but still isn't
# solved as of 2012-10-02 (http://bugs.python.org/issue4709).
case "$gdb_host" in
mingw64)
if test "${GCC}" = yes; then
CPPFLAGS="$CPPFLAGS -DMS_WIN64"
fi
;;
esac
else
# Even if Python support is not compiled in, we need to have this file
# included so that the "python" command, et.al., still exists.
CONFIG_OBS="$CONFIG_OBS python/python.o"
CONFIG_SRCS="$CONFIG_SRCS python/python.c"
fi
# Work around Python http://bugs.python.org/issue10112. See also
# http://bugs.python.org/issue11410, otherwise -Wl,--dynamic-list has
# no effect. Note that the only test after this that uses Python is
# the -rdynamic/-Wl,--dynamic-list test, and we do want that one to be
# run without -export-dynamic too.
PYTHON_LIBS=`echo $PYTHON_LIBS | sed -e 's/-Xlinker -export-dynamic//'`
AC_SUBST(PYTHON_CFLAGS)
AC_SUBST(PYTHON_CPPFLAGS)
AC_SUBST(PYTHON_LIBS)
AM_CONDITIONAL(HAVE_PYTHON, test "${have_libpython}" != no)
# -------------------- #
# Check for libguile. #
# -------------------- #
dnl Utility to simplify finding libguile.
dnl $1 = pkg-config-program
dnl $2 = space-separate list of guile versions to try
dnl $3 = yes|no, indicating whether to flag errors or ignore them
dnl $4 = the shell variable to assign the result to
dnl If libguile is found we store "yes" here.
AC_DEFUN([AC_TRY_LIBGUILE],
[
pkg_config=$1
guile_version_list=$2
flag_errors=$3
define([have_libguile_var],$4)
found_usable_guile=checking
AC_MSG_CHECKING([for usable guile from ${pkg_config}])
for guile_version in ${guile_version_list}; do
${pkg_config} --exists ${guile_version} 2>/dev/null
if test $? != 0; then
continue
fi
dnl pkg-config says the package exists, so if we get an error now,
dnl that's bad.
new_CPPFLAGS=`${pkg_config} --cflags ${guile_version}`
if test $? != 0; then
AC_MSG_ERROR([failure running pkg-config --cflags ${guile_version}])
fi
new_LIBS=`${pkg_config} --libs ${guile_version}`
if test $? != 0; then
AC_MSG_ERROR([failure running pkg-config --libs ${guile_version}])
fi
dnl If we get this far, great.
found_usable_guile=${guile_version}
break
done
if test "${found_usable_guile}" = "checking"; then
if test "${flag_errors}" = "yes"; then
AC_MSG_ERROR([unable to find usable guile version from "${guile_version_list}"])
else
found_usable_guile=no
fi
fi
dnl One final sanity check.
dnl The user could have said --with-guile=python-2.7.
if test "${found_usable_guile}" != no; then
save_CPPFLAGS=$CPPFLAGS
save_LIBS=$LIBS
CPPFLAGS="$CPPFLAGS $new_CPPFLAGS"
LIBS="$LIBS $new_LIBS"
AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include "libguile.h"]],
[[scm_init_guile ();]])],
[have_libguile_var=yes
GUILE_CPPFLAGS=$new_CPPFLAGS
GUILE_LIBS=$new_LIBS],
[found_usable_guile=no])
dnl scm_set_automatic_finalization_enabled added in Guile 2.2.
AC_CHECK_FUNC(scm_set_automatic_finalization_enabled,
AC_DEFINE(HAVE_GUILE_MANUAL_FINALIZATION, 1,
[Define if Guile supports manual finalization.])
)
CPPFLAGS=$save_CPPFLAGS
LIBS=$save_LIBS
if test "${found_usable_guile}" = no; then
if test "${flag_errors}" = yes; then
AC_MSG_FAILURE([linking guile version ${guile_version} test program failed])
fi
fi
fi
AC_MSG_RESULT([${found_usable_guile}])
])
dnl There are several different values for --with-guile:
dnl
dnl no - Don't include guile support.
dnl yes - Include guile support, error if it's missing.
dnl The pkg-config program must be in $PATH.
dnl auto - Same as "yes", but if guile is missing from the system,
dnl fall back to "no".
dnl guile-version [guile-version-choice-2 ...] -
dnl A space-separated list of guile package versions to try.
dnl These are passed to pkg-config as-is.
dnl E.g., guile-2.0 or guile-2.2-uninstalled
dnl This requires making sure PKG_CONFIG_PATH is set appropriately.
dnl /path/to/pkg-config -
dnl Use this pkg-config program.
dnl NOTE: This needn't be the "real" pkg-config program.
dnl It could be a shell script. It is invoked as:
dnl pkg-config --exists $version
dnl pkg-config --cflags $version
dnl pkg-config --libs $version
dnl pkg-config --variable guild $version
dnl The script will be called with $version having each value in
dnl $try_guile_versions until --exists indicates success.
AC_ARG_WITH(guile,
AS_HELP_STRING([--with-guile@<:@=GUILE@:>@], [include guile support (auto/yes/no/<guile-version>/<pkg-config-program>)]),
[], [with_guile=auto])
AC_MSG_CHECKING([whether to use guile])
AC_MSG_RESULT([$with_guile])
dnl We check guile with pkg-config.
AC_PATH_PROG(pkg_config_prog_path, pkg-config, missing)
try_guile_versions="guile-3.0 guile-2.2 guile-2.0"
have_libguile=no
case "${with_guile}" in
no)
AC_MSG_WARN([guile support disabled; some features will be unavailable.])
;;
auto)
if test "${pkg_config_prog_path}" = "missing"; then
AC_MSG_WARN([pkg-config not found, guile support disabled])
else
AC_TRY_LIBGUILE(${pkg_config_prog_path}, ${try_guile_versions}, no, have_libguile)
fi
;;
yes)
if test "${pkg_config_prog_path}" = "missing"; then
AC_MSG_ERROR([pkg-config not found])
fi
AC_TRY_LIBGUILE(${pkg_config_prog_path}, ${try_guile_versions}, yes, have_libguile)
;;
[[\\/]]* | ?:[[\\/]]*)
if test -x "${with_guile}"; then
AC_TRY_LIBGUILE(${with_guile}, ${try_guile_versions}, yes, have_libguile)
else
AC_MSG_ERROR([Guile config program not executable: ${with_guile}])
fi
;;
"" | */*)
# Disallow --with=guile="" and --with-guile=foo/bar.
AC_MSG_ERROR([invalid value for --with-guile])
;;
*)
# A space separate list of guile versions to try, in order.
if test "${pkg_config_prog_path}" = "missing"; then
AC_MSG_ERROR([pkg-config not found])
fi
AC_TRY_LIBGUILE(${pkg_config_prog_path}, ${with_guile}, yes, have_libguile)
;;
esac
if test "${have_libguile}" != no; then
dnl Get the name of the 'guild' program.
case "${with_guile}" in
[[\\/]]* | ?:[[\\/]]*)
GDB_GUILE_PROGRAM_NAMES(["${with_guile}"], ["${guile_version}"])
;;
*)
GDB_GUILE_PROGRAM_NAMES(["${pkg_config_prog_path}"], ["${guile_version}"])
;;
esac
dnl Make sure guild can handle this host.
GDB_TRY_GUILD([$srcdir/guile/lib/gdb/support.scm])
dnl If not, disable guile support.
if test "$ac_cv_guild_ok" = no; then
have_libguile=no
AC_MSG_WARN(disabling guile support, $GUILD fails compiling for $host)
fi
fi
if test "${have_libguile}" != no; then
AC_DEFINE(HAVE_GUILE, 1, [Define if Guile interpreter is being linked in.])
CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_GUILE_OBS)"
CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_GUILE_DEPS)"
CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_GUILE_SRCS)"
CONFIG_INSTALL="$CONFIG_INSTALL install-guile"
ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_GUILE_CFLAGS)"
dnl The 'scm_new_smob' function appeared in Guile 2.0.6.
save_LIBS="$LIBS"
save_CPPFLAGS="$CPPFLAGS"
LIBS="$GUILE_LIBS"
CPPFLAGS="$GUILE_CPPFLAGS"
AC_CHECK_FUNCS([scm_new_smob])
LIBS="$save_LIBS"
CPPFLAGS="$save_CPPFLAGS"
else
# Even if Guile support is not compiled in, we need to have these files
# included.
CONFIG_OBS="$CONFIG_OBS guile/guile.o"
CONFIG_SRCS="$CONFIG_SRCS guile/guile.c"
fi
AC_SUBST(GUILE_CPPFLAGS)
AC_SUBST(GUILE_LIBS)
AM_CONDITIONAL(HAVE_GUILE, test "${have_libguile}" != no)
# ---------------------------- #
# Check for source highlight. #
# ---------------------------- #
SRCHIGH_LIBS=
SRCHIGH_CFLAGS=
AC_ARG_ENABLE(source-highlight,
AS_HELP_STRING([--enable-source-highlight],
[enable source-highlight for source listings]),
[case "${enableval}" in
yes) enable_source_highlight=yes ;;
no) enable_source_highlight=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for source-highlight option) ;;
esac],
[enable_source_highlight=auto])
if test "${enable_source_highlight}" != "no"; then
AC_MSG_CHECKING([for the source-highlight library])
if test "${pkg_config_prog_path}" = "missing"; then
AC_MSG_RESULT([no - pkg-config not found])
if test "${enable_source_highlight}" = "yes"; then
AC_MSG_ERROR([pkg-config was not found in your system])
fi
else
if ${pkg_config_prog_path} --exists source-highlight; then
case "$LDFLAGS" in
*static-libstdc*)
AC_MSG_ERROR([source highlight is incompatible with -static-libstdc++; dnl
either use --disable-source-highlight or dnl
--without-static-standard-libraries])
;;
esac
SRCHIGH_CFLAGS=`${pkg_config_prog_path} --cflags source-highlight`
SRCHIGH_LIBS=`${pkg_config_prog_path} --libs source-highlight`
AC_DEFINE([HAVE_SOURCE_HIGHLIGHT], 1,
[Define to 1 if the source-highlight library is available])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
if test "${enable_source_highlight}" = "yes"; then
AC_MSG_ERROR([source-highlight was not found in your system])
fi
fi
fi
fi
AC_SUBST(SRCHIGH_LIBS)
AC_SUBST(SRCHIGH_CFLAGS)
# ------------------------- #
# Checks for header files. #
# ------------------------- #
AC_HEADER_STDC
# elf_hp.h is for HP/UX 64-bit shared library support.
AC_CHECK_HEADERS([nlist.h machine/reg.h \
thread_db.h \
sys/file.h sys/filio.h sys/ioctl.h sys/param.h \
sys/procctl.h sys/resource.h sys/ptrace.h ptrace.h \
sys/reg.h sys/debugreg.h \
termios.h elf_hp.h])
AC_CHECK_HEADERS(sys/user.h, [], [],
[#if HAVE_SYS_PARAM_H
# include <sys/param.h>
#endif
])
AC_CHECK_HEADERS(curses.h cursesX.h ncurses.h ncursesw/ncurses.h ncurses/ncurses.h ncurses/term.h)
AC_CHECK_HEADERS(term.h, [], [],
[#if HAVE_CURSES_H
# include <curses.h>
#endif
])
AC_CHECK_HEADERS([sys/socket.h])
AC_CHECK_HEADERS([ws2tcpip.h])
AC_CHECK_HEADERS([execinfo.h])
# ------------------------- #
# Checks for declarations. #
# ------------------------- #
libiberty_INIT
AC_CHECK_DECLS([snprintf])
AM_LC_MESSAGES
# ------------------ #
# Checks for types. #
# ------------------ #
AC_CHECK_TYPES(socklen_t, [], [],
[#include <sys/types.h>
#if HAVE_SYS_SOCKET_H
# include <sys/socket.h>
#elif HAVE_WS2TCPIP_H
# include <ws2tcpip.h>
#endif
])
# ------------------------------------- #
# Checks for compiler characteristics. #
# ------------------------------------- #
AC_C_CONST
AC_C_INLINE
AC_C_BIGENDIAN
# ------------------------------ #
# Checks for library functions. #
# ------------------------------ #
AC_CHECK_FUNCS([getuid getgid \
pipe pread pread64 pwrite resize_term \
getpgid setsid \
sigaction sigsetmask socketpair \
ttrace wborder wresize setlocale iconvlist libiconvlist btowc \
setrlimit getrlimit posix_madvise waitpid \
use_default_colors])
AM_LANGINFO_CODESET
GDB_AC_COMMON
# Check the return and argument types of ptrace.
GDB_AC_PTRACE
dnl AC_FUNC_SETPGRP does not work when cross compiling
dnl Instead, assume we will have a prototype for setpgrp if cross compiling.
if test "$cross_compiling" = no; then
AC_FUNC_SETPGRP
else
AC_CACHE_CHECK(
[whether setpgrp takes no argument],
[ac_cv_func_setpgrp_void],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <unistd.h>],
[if (setpgrp(1,1) == -1)
exit (0);
else
exit (1);]
)],
[ac_cv_func_setpgrp_void=no],
[ac_cv_func_setpgrp_void=yes]
)]
)
if test "$ac_cv_func_setpgrp_void" = yes; then
AC_DEFINE(SETPGRP_VOID, 1)
fi
fi
# Check if <sys/proc.h> defines `struct thread' with a td_pcb member.
AC_CHECK_MEMBERS([struct thread.td_pcb], [], [],
[#include <sys/param.h>
#include <sys/proc.h>
])
# See if <sys/lwp.h> defines `struct lwp`.
AC_CACHE_CHECK(
[for struct lwp],
[gdb_cv_struct_lwp],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <sys/param.h>
#define _KMEMUSER
#include <sys/lwp.h>],
[struct lwp l;]
)],
[gdb_cv_struct_lwp=yes],
[gdb_cv_struct_lwp=no]
)]
)
if test "$gdb_cv_struct_lwp" = yes; then
AC_DEFINE(HAVE_STRUCT_LWP, 1,
[Define to 1 if your system has struct lwp.])
fi
# See if <machine/reg.h> degines `struct reg'.
AC_CACHE_CHECK(
[for struct reg in machine/reg.h],
[gdb_cv_struct_reg],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <sys/types.h>
#include <machine/reg.h>],
[struct reg r;]
)],
[gdb_cv_struct_reg=yes],
[gdb_cv_struct_reg=no]
)]
)
if test "$gdb_cv_struct_reg" = yes; then
AC_DEFINE(HAVE_STRUCT_REG, 1,
[Define to 1 if your system has struct reg in <machine/reg.h>.])
fi
# See if <machine/reg.h> supports the %fs and %gs i386 segment registers.
# Older i386 BSD's don't have the r_fs and r_gs members of `struct reg'.
AC_CHECK_MEMBERS([struct reg.r_fs, struct reg.r_gs], [], [],
[#include <sys/types.h>
#include <machine/reg.h>])
# See if <sys/ptrace.h> provides the PTRACE_GETREGS request.
AC_MSG_CHECKING(for PTRACE_GETREGS)
AC_CACHE_VAL(
[gdb_cv_have_ptrace_getregs],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM([#include <sys/ptrace.h>], [PTRACE_GETREGS;])],
[gdb_cv_have_ptrace_getregs=yes],
[gdb_cv_have_ptrace_getregs=no]
)]
)
AC_MSG_RESULT($gdb_cv_have_ptrace_getregs)
if test "$gdb_cv_have_ptrace_getregs" = yes; then
AC_DEFINE(HAVE_PTRACE_GETREGS, 1,
[Define if sys/ptrace.h defines the PTRACE_GETREGS request.])
fi
# See if <sys/ptrace.h> provides the PTRACE_GETFPXREGS request.
AC_MSG_CHECKING(for PTRACE_GETFPXREGS)
AC_CACHE_VAL(
[gdb_cv_have_ptrace_getfpxregs],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM([#include <sys/ptrace.h>], [PTRACE_GETFPXREGS;])],
[gdb_cv_have_ptrace_getfpxregs=yes],
[gdb_cv_have_ptrace_getfpxregs=no]
)]
)
AC_MSG_RESULT($gdb_cv_have_ptrace_getfpxregs)
if test "$gdb_cv_have_ptrace_getfpxregs" = yes; then
AC_DEFINE(HAVE_PTRACE_GETFPXREGS, 1,
[Define if sys/ptrace.h defines the PTRACE_GETFPXREGS request.])
fi
# See if <sys/ptrace.h> provides the PT_GETDBREGS request.
AC_MSG_CHECKING(for PT_GETDBREGS)
AC_CACHE_VAL(
[gdb_cv_have_pt_getdbregs],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <sys/types.h>
#include <sys/ptrace.h>],
[PT_GETDBREGS;]
)],
[gdb_cv_have_pt_getdbregs=yes],
[gdb_cv_have_pt_getdbregs=no]
)]
)
AC_MSG_RESULT($gdb_cv_have_pt_getdbregs)
if test "$gdb_cv_have_pt_getdbregs" = yes; then
AC_DEFINE(HAVE_PT_GETDBREGS, 1,
[Define if sys/ptrace.h defines the PT_GETDBREGS request.])
fi
# See if <sys/ptrace.h> provides the PT_GETXMMREGS request.
AC_MSG_CHECKING(for PT_GETXMMREGS)
AC_CACHE_VAL(
[gdb_cv_have_pt_getxmmregs],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <sys/types.h>
#include <sys/ptrace.h>],
[PT_GETXMMREGS;]
)],
[gdb_cv_have_pt_getxmmregs=yes],
[gdb_cv_have_pt_getxmmregs=no]
)]
)
AC_MSG_RESULT($gdb_cv_have_pt_getxmmregs)
if test "$gdb_cv_have_pt_getxmmregs" = yes; then
AC_DEFINE(HAVE_PT_GETXMMREGS, 1,
[Define if sys/ptrace.h defines the PT_GETXMMREGS request.])
fi
# See if <sys/ptrace.h> supports LWP names on FreeBSD
# Older FreeBSD versions don't have the pl_tdname member of
# `struct ptrace_lwpinfo'.
AC_CHECK_MEMBERS([struct ptrace_lwpinfo.pl_tdname], [], [],
[#include <sys/ptrace.h>])
# See if <sys/ptrace.h> supports syscall fields on FreeBSD. The
# pl_syscall_code member of `struct ptrace_lwpinfo' was added in
# FreeBSD 10.3.
AC_CHECK_MEMBERS([struct ptrace_lwpinfo.pl_syscall_code], [], [],
[#include <sys/ptrace.h>])
# Check if the compiler supports the `long long' type.
AC_CACHE_CHECK([for long long support in compiler], gdb_cv_c_long_long,
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
[[extern long long foo;]],
[[switch (foo & 2) { case 0: return 1; }]])],
gdb_cv_c_long_long=yes,
gdb_cv_c_long_long=no)])
if test "$gdb_cv_c_long_long" != yes; then
# libdecnumber requires long long.
AC_MSG_ERROR([Compiler must support long long for GDB.])
fi
# Check if the compiler and runtime support printing long longs.
AC_CACHE_CHECK([for long long support in printf],
gdb_cv_printf_has_long_long,
[AC_RUN_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
[[char buf[32];
long long l = 0;
l = (l << 16) + 0x0123;
l = (l << 16) + 0x4567;
l = (l << 16) + 0x89ab;
l = (l << 16) + 0xcdef;
sprintf (buf, "0x%016llx", l);
return (strcmp ("0x0123456789abcdef", buf));]])],
gdb_cv_printf_has_long_long=yes,
gdb_cv_printf_has_long_long=no,
gdb_cv_printf_has_long_long=no)])
if test "$gdb_cv_printf_has_long_long" = yes; then
AC_DEFINE(PRINTF_HAS_LONG_LONG, 1,
[Define to 1 if the "%ll" format works to print long longs.])
fi
# Check if the compiler and runtime support printing decfloats.
AC_CACHE_CHECK([for decfloat support in printf],
gdb_cv_printf_has_decfloat,
[AC_RUN_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
[[char buf[64];
_Decimal32 d32 = 1.2345df;
_Decimal64 d64 = 1.2345dd;
_Decimal128 d128 = 1.2345dl;
sprintf (buf, "Decimal32: %H\nDecimal64: %D\nDecimal128: %DD", d32, d64, d128);
return (strcmp ("Decimal32: 1.2345\nDecimal64: 1.2345\nDecimal128: 1.2345", buf));]])],
gdb_cv_printf_has_decfloat=yes,
gdb_cv_printf_has_decfloat=no,
gdb_cv_printf_has_decfloat=no)])
if test "$gdb_cv_printf_has_decfloat" = yes; then
AC_DEFINE(PRINTF_HAS_DECFLOAT, 1,
[Define to 1 if the "%H, %D and %DD" formats work to print decfloats.])
fi
# Check if the compiler supports the `long double' type. We can't use
# AC_C_LONG_DOUBLE because that one does additional checks on the
# constants defined in <float.h> that fail on some systems,
# e.g. FreeBSD/i386 4.7 and OpenBSD/i386 3.6.
AC_CACHE_CHECK([for long double support in compiler], gdb_cv_c_long_double,
[AC_COMPILE_IFELSE([AC_LANG_SOURCE([[long double foo;]])],
gdb_cv_c_long_double=yes,
gdb_cv_c_long_double=no)])
if test "$gdb_cv_c_long_double" = yes; then
AC_DEFINE(HAVE_LONG_DOUBLE, 1,
[Define to 1 if the compiler supports long double.])
fi
# Check if the compiler and runtime support printing long doubles.
AC_CACHE_CHECK([for long double support in printf],
gdb_cv_printf_has_long_double,
[AC_RUN_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
[[char buf[16];
long double f = 3.141592653;
sprintf (buf, "%Lg", f);
return (strncmp ("3.14159", buf, 7));]])],
gdb_cv_printf_has_long_double=yes,
gdb_cv_printf_has_long_double=no,
gdb_cv_printf_has_long_double=no)])
if test "$gdb_cv_printf_has_long_double" = yes; then
AC_DEFINE(PRINTF_HAS_LONG_DOUBLE, 1,
[Define to 1 if the "%Lg" format works to print long doubles.])
fi
# Check if the compiler and runtime support scanning long doubles.
AC_CACHE_CHECK([for long double support in scanf],
gdb_cv_scanf_has_long_double,
[AC_RUN_IFELSE([AC_LANG_PROGRAM(
[[#include <stdio.h>]],
[[char *buf = "3.141592653";
long double f = 0;
sscanf (buf, "%Lg", &f);
return !(f > 3.14159 && f < 3.14160);]])],
gdb_cv_scanf_has_long_double=yes,
gdb_cv_scanf_has_long_double=no,
gdb_cv_scanf_has_long_double=no)])
if test "$gdb_cv_scanf_has_long_double" = yes; then
AC_DEFINE(SCANF_HAS_LONG_DOUBLE, 1,
[Define to 1 if the "%Lg" format works to scan long doubles.])
fi
case ${host_os} in
aix*)
AC_CACHE_CHECK(
[for -bbigtoc option], [gdb_cv_bigtoc],
[SAVE_LDFLAGS=$LDFLAGS
case $GCC in
yes) gdb_cv_bigtoc=-Wl,-bbigtoc ;;
*) gdb_cv_bigtoc=-bbigtoc ;;
esac
LDFLAGS=$LDFLAGS\ $gdb_cv_bigtoc
AC_LINK_IFELSE(
[AC_LANG_PROGRAM([], [int i;])],
[],
[gdb_cv_bigtoc=]
)
LDFLAGS="${SAVE_LDFLAGS}"]
)
CONFIG_LDFLAGS="${CONFIG_LDFLAGS} ${gdb_cv_bigtoc}"
;;
esac
AC_MSG_CHECKING(for the dynamic export flag)
dynamic_list=false
if test "${gdb_native}" = yes; then
# The dynamically loaded libthread_db needs access to symbols in the gdb
# executable. Older GNU ld supports --export-dynamic but --dynamic-list
# may not be supported there.
old_LDFLAGS="$LDFLAGS"
# Older GNU ld supports --export-dynamic but --dynamic-list it does not.
RDYNAMIC="-Wl,--dynamic-list=${srcdir}/proc-service.list"
LDFLAGS="$LDFLAGS $RDYNAMIC"
if test "${have_libpython}" = no; then
AC_LINK_IFELSE(
[AC_LANG_PROGRAM([], [])],
[dynamic_list=true],
[]
)
else
# Workaround http://bugs.python.org/issue4434 where static
# libpythonX.Y.a would get its symbols required for
# pythonX.Y/lib-dynload/*.so modules hidden by -Wl,--dynamic-list.
# Problem does not happen for the recommended libpythonX.Y.so linkage.
# Note the workaround for Python
# http://bugs.python.org/issue10112 earlier has removed
# -export-dynamic from PYTHON_LIBS. That's exactly what we want
# here too, as otherwise it'd make this -Wl,--dynamic-list test
# always pass.
old_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $PYTHON_CFLAGS"
old_LIBS="$LIBS"
LIBS="$LIBS $PYTHON_LIBS"
old_CPPFLAGS="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $PYTHON_CPPFLAGS"
AC_RUN_IFELSE(
[AC_LANG_PROGRAM(
[#include "Python.h"],
[int err;
Py_Initialize ();
err = PyRun_SimpleString ("import ctypes\n");
Py_Finalize ();
return err == 0 ? 0 : 1;])],
[dynamic_list=true], [], [true])
LIBS="$old_LIBS"
CFLAGS="$old_CFLAGS"
CPPFLAGS="$old_CPPFLAGS"
fi
LDFLAGS="$old_LDFLAGS"
fi
if $dynamic_list; then
found="-Wl,--dynamic-list"
RDYNAMIC='-Wl,--dynamic-list=$(srcdir)/proc-service.list'
else
found="-rdynamic"
RDYNAMIC="-rdynamic"
fi
AC_SUBST(RDYNAMIC)
AC_MSG_RESULT($found)
AC_CACHE_CHECK(
[whether execinfo.h backtrace is available],
gdb_cv_execinfo_backtrace,
[AC_LINK_IFELSE(
[AC_LANG_PROGRAM(
[
#include <execinfo.h>
],
[
int f;
void *b[[2]];
f = backtrace (b, 2);
backtrace_symbols_fd (b, f, 2);
])],
[gdb_cv_execinfo_backtrace=yes],
[gdb_cv_execinfo_backtrace=no])])
if test "$gdb_cv_execinfo_backtrace" = yes; then
AC_DEFINE(HAVE_EXECINFO_BACKTRACE, 1,
[Define to 1 if execinfo.h backtrace functions are available.])
fi
dnl For certain native configurations, we need to check whether thread
dnl support can be built in or not.
dnl
dnl Note that we only want this if we are both native (host == target),
dnl and not doing a canadian cross build (build == host).
if test "${build}" = "${host}" -a "${host}" = "${target}" ; then
case ${host_os} in
aix*)
AC_MSG_CHECKING(for AiX thread debugging library)
AC_CACHE_VAL(
[gdb_cv_have_aix_thread_debug],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <sys/pthdebug.h>],
[#ifndef PTHDB_VERSION_3
#error
#endif]
)],
[gdb_cv_have_aix_thread_debug=yes],
[gdb_cv_have_aix_thread_debug=no]
)]
)
AC_MSG_RESULT($gdb_cv_have_aix_thread_debug)
if test "$gdb_cv_have_aix_thread_debug" = yes; then
CONFIG_SRCS="${CONFIG_SRCS} aix-thread.c"
CONFIG_OBS="${CONFIG_OBS} aix-thread.o"
LIBS="$LIBS -lpthdebug"
# Older versions of AIX do not provide the declaration for
# the getthrds function (it appears that it was introduced
# with AIX 6.x).
AC_CHECK_DECLS(getthrds, [], [], [[#include <procinfo.h>]])
fi
;;
esac
AC_SUBST(CONFIG_LDFLAGS)
fi
dnl See if we have a thread_db header file that has TD_NOTALLOC and
dnl other error codes.
if test "x$ac_cv_header_thread_db_h" = "xyes"; then
AC_CACHE_CHECK(
[whether <thread_db.h> has TD_NOTALLOC],
[gdb_cv_thread_db_h_has_td_notalloc],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <thread_db.h>],
[int i = TD_NOTALLOC;]
)],
[gdb_cv_thread_db_h_has_td_notalloc=yes],
[gdb_cv_thread_db_h_has_td_notalloc=no]
)]
)
AC_CACHE_CHECK(
[whether <thread_db.h> has TD_VERSION],
[gdb_cv_thread_db_h_has_td_version],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <thread_db.h>],
[int i = TD_VERSION;]
)],
[gdb_cv_thread_db_h_has_td_version=yes],
[gdb_cv_thread_db_h_has_td_version=no]
)]
)
AC_CACHE_CHECK(
[whether <thread_db.h> has TD_NOTLS],
[gdb_cv_thread_db_h_has_td_notls],
[AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM(
[#include <thread_db.h>],
[int i = TD_NOTLS;]
)],
[gdb_cv_thread_db_h_has_td_notls=yes],
[gdb_cv_thread_db_h_has_td_notls=no]
)]
)
fi
if test "x$gdb_cv_thread_db_h_has_td_notalloc" = "xyes"; then
AC_DEFINE(THREAD_DB_HAS_TD_NOTALLOC, 1,
[Define if <thread_db.h> has the TD_NOTALLOC error code.])
fi
if test "x$gdb_cv_thread_db_h_has_td_version" = "xyes"; then
AC_DEFINE(THREAD_DB_HAS_TD_VERSION, 1,
[Define if <thread_db.h> has the TD_VERSION error code.])
fi
if test "x$gdb_cv_thread_db_h_has_td_notls" = "xyes"; then
AC_DEFINE(THREAD_DB_HAS_TD_NOTLS, 1,
[Define if <thread_db.h> has the TD_NOTLS error code.])
fi
dnl Set the host's .gdbinit filename.
case $host_os in
go32* | *djgpp*)
gdbinit=gdb.ini
;;
*)
gdbinit=.gdbinit
;;
esac
AC_DEFINE_UNQUOTED(GDBINIT,"$gdbinit",[The .gdbinit filename.])
dnl Set the host's .gdbearlyinit filename
AC_DEFINE_UNQUOTED(GDBEARLYINIT,".gdbearlyinit",[The .gdbearlyinit filename.])
dnl Handle optional features that can be enabled.
# Support for --with-sysroot is a copy of GDB_AC_WITH_DIR,
# except that the argument to --with-sysroot is optional.
# --with-sysroot (or --with-sysroot=yes) sets the default sysroot path.
if test "x$with_sysroot" = xyes; then
with_sysroot="${exec_prefix}/${target_alias}/sys-root"
fi
AC_ARG_WITH(sysroot,
AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
[search for usr/lib et al within DIR]),
[TARGET_SYSTEM_ROOT=$withval], [TARGET_SYSTEM_ROOT=])
AC_DEFINE_DIR(TARGET_SYSTEM_ROOT, TARGET_SYSTEM_ROOT,
[search for usr/lib et al within DIR])
AC_SUBST(TARGET_SYSTEM_ROOT)
GDB_AC_DEFINE_RELOCATABLE(TARGET_SYSTEM_ROOT, sysroot, ${ac_define_dir})
GDB_AC_WITH_DIR(SYSTEM_GDBINIT, system-gdbinit,
[automatically load a system-wide gdbinit file],
[])
GDB_AC_WITH_DIR(SYSTEM_GDBINIT_DIR, system-gdbinit-dir,
[automatically load system-wide gdbinit files from this directory],
[])
AM_GDB_WARNINGS
AM_GDB_UBSAN
# In the Cygwin environment, we need some additional flags.
AC_CACHE_CHECK([for cygwin], gdb_cv_os_cygwin,
[AC_EGREP_CPP(^lose$, [
#if defined (__CYGWIN__) || defined (__CYGWIN32__)
lose
#endif],[gdb_cv_os_cygwin=yes],[gdb_cv_os_cygwin=no])])
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
*) SER_HARDWIRE="$SER_HARDWIRE ser-uds.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
# libreadline needs libuser32.a in a cygwin environment
WIN32LIBS=
if test x"$gdb_cv_os_cygwin" = xyes; then
WIN32LIBS="-luser32"
case "${target}" in
*cygwin*) WIN32LIBS="$WIN32LIBS -limagehlp"
;;
esac
fi
# The ser-tcp.c module requires sockets.
# Note that WIN32APILIBS is set by GDB_AC_COMMON.
WIN32LIBS="$WIN32LIBS $WIN32APILIBS"
# Add ELF support to GDB, but only if BFD includes ELF support.
GDB_AC_CHECK_BFD([for ELF support in BFD], gdb_cv_var_elf,
[bfd_get_elf_phdr_upper_bound (NULL)], elf-bfd.h)
if test "$gdb_cv_var_elf" = yes; then
CONFIG_OBS="$CONFIG_OBS elfread.o stap-probe.o dtrace-probe.o \
gcore-elf.o elf-none-tdep.o"
AC_DEFINE(HAVE_ELF, 1,
[Define if ELF support should be included.])
# -ldl is provided by bfd/Makfile.am (LIBDL) <PLUGINS>.
if test "$plugins" = "yes"; then
AC_SEARCH_LIBS(dlopen, dl)
fi
fi
# Add macho support to GDB, but only if BFD includes it.
GDB_AC_CHECK_BFD([for Mach-O support in BFD], gdb_cv_var_macho,
[bfd_mach_o_lookup_command (NULL, 0, NULL)], mach-o.h)
if test "$gdb_cv_var_macho" = yes; then
CONFIG_OBS="$CONFIG_OBS machoread.o"
fi
# Add any host-specific objects to GDB.
CONFIG_OBS="${CONFIG_OBS} ${gdb_host_obs}"
# If building on ELF, look for lzma support for embedded compressed debug info.
if test "$gdb_cv_var_elf" = yes; then
AC_ARG_WITH(lzma,
AS_HELP_STRING([--with-lzma], [support lzma compression (auto/yes/no)]),
[], [with_lzma=auto])
AC_MSG_CHECKING([whether to use lzma])
AC_MSG_RESULT([$with_lzma])
if test "${with_lzma}" != no; then
AC_LIB_HAVE_LINKFLAGS([lzma], [], [#include "lzma.h"],
[lzma_index_iter iter;
lzma_index_iter_init (&iter, 0);
lzma_mf_is_supported (LZMA_MF_HC3);])
if test "$HAVE_LIBLZMA" != yes; then
if test "$with_lzma" = yes; then
AC_MSG_ERROR([missing liblzma for --with-lzma])
fi
fi
fi
fi
LIBGUI="../libgui/src/libgui.a"
GUI_CFLAGS_X="-I${srcdir}/../libgui/src"
AC_SUBST(LIBGUI)
AC_SUBST(GUI_CFLAGS_X)
WIN32LDAPP=
AC_SUBST(WIN32LIBS)
AC_SUBST(WIN32LDAPP)
case "${host}" in
*-*-cygwin* | *-*-mingw* )
configdir="win"
;;
*)
configdir="unix"
;;
esac
GDBTKLIBS=
if test "${enable_gdbtk}" = "yes"; then
# Gdbtk must have an absolute path to srcdir in order to run
# properly when not installed.
here=`pwd`
cd ${srcdir}
GDBTK_SRC_DIR=`pwd`
cd $here
SC_PATH_TCLCONFIG
# If $no_tk is nonempty, then we can't do Tk, and there is no
# point to doing Tcl.
SC_PATH_TKCONFIG
if test -z "${no_tcl}" -a -z "${no_tk}"; then
SC_LOAD_TCLCONFIG
# Check for in-tree tcl
here=`pwd`
cd ${srcdir}/..
topdir=`pwd`
cd ${here}
intree="no"
if test "${TCL_SRC_DIR}" = "${topdir}/tcl"; then
intree="yes"
fi
# Find Tcl private headers
if test x"${intree}" = xno; then
CY_AC_TCL_PRIVATE_HEADERS
TCL_INCLUDE="${TCL_INCLUDE_SPEC} ${TCL_PRIVATE_INCLUDE}"
TCL_LIBRARY="${TCL_LIB_SPEC}"
TCL_DEPS=""
else
# If building tcl in the same src tree, private headers
# are not needed, but we need to be sure to use the right
# headers library
TCL_INCLUDE="-I${TCL_SRC_DIR}/generic"
TCL_LIBRARY="${TCL_BUILD_LIB_SPEC}"
TCL_DEPS="../tcl/${configdir}${TCL_LIB_FILE}"
fi
AC_SUBST(TCL_INCLUDE)
AC_SUBST(TCL_LIBRARY)
AC_SUBST(TCL_DEPS)
SC_LOAD_TKCONFIG
# Check for in-tree Tk
intree="no"
if test "${TK_SRC_DIR}" = "${topdir}/tk"; then
intree="yes"
fi
# Find Tk private headers
if test x"${intree}" = xno; then
CY_AC_TK_PRIVATE_HEADERS
TK_INCLUDE="${TK_INCLUDE_SPEC} ${TK_PRIVATE_INCLUDE}"
TK_LIBRARY=${TK_LIB_SPEC}
TK_DEPS=""
else
TK_INCLUDE="-I${TK_SRC_DIR}/generic"
TK_LIBRARY="${TK_BUILD_LIB_SPEC}"
TK_DEPS="../tk/${configdir}/${TK_LIB_FILE}"
fi
AC_SUBST(TK_INCLUDE)
AC_SUBST(TK_LIBRARY)
AC_SUBST(TK_DEPS)
AC_SUBST(TK_XINCLUDES)
ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_GDBTK_CFLAGS)"
# Include some libraries that Tcl and Tk want.
TCL_LIBS='$(LIBGUI) $(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS)'
# Yes, the ordering seems wrong here. But it isn't.
# TK_LIBS is the list of libraries that need to be linked
# after Tcl/Tk. Note that this isn't put into LIBS. If it
# were in LIBS then any link tests after this point would
# try to include things like `$(LIBGUI)', which wouldn't work.
GDBTKLIBS="${TCL_LIBS} ${TK_LIBS}"
CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_GDBTK_OBS)"
CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_GDBTK_DEPS)"
CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_GDBTK_SRCS)"
CONFIG_ALL="${CONFIG_ALL} all-gdbtk"
CONFIG_CLEAN="${CONFIG_CLEAN} clean-gdbtk"
CONFIG_INSTALL="${CONFIG_INSTALL} install-gdbtk"
CONFIG_UNINSTALL="${CONFIG_UNINSTALL} uninstall-gdbtk"
if test x"$gdb_cv_os_cygwin" = xyes; then
WIN32LIBS="${WIN32LIBS} -lshell32 -lgdi32 -lcomdlg32 -ladvapi32"
WIN32LDAPP="-Wl,--subsystem,console"
CONFIG_OBS="${CONFIG_OBS} gdbres.o"
fi
AC_CONFIG_SUBDIRS(gdbtk)
fi
fi
AC_SUBST(X_CFLAGS)
AC_SUBST(X_LDFLAGS)
AC_SUBST(X_LIBS)
AC_SUBST(GDBTKLIBS)
AC_SUBST(GDBTK_CFLAGS)
AC_SUBST(GDBTK_SRC_DIR)
AC_PATH_X
# Unlike the sim directory, whether a simulator is linked is controlled by
# presence of a gdb_sim definition in the target configure.tgt entry.
# This code just checks for a few cases where we'd like to ignore those
# definitions, even when they're present in the '.mt' file. These cases
# are when --disable-sim is specified, or if the simulator directory is
# not part of the source tree.
#
AC_ARG_ENABLE(sim,
AS_HELP_STRING([--enable-sim], [link gdb with simulator]),
[echo "enable_sim = $enable_sim";
echo "enableval = ${enableval}";
case "${enableval}" in
yes) ignore_sim=false ;;
no) ignore_sim=true ;;
*) ignore_sim=false ;;
esac],
[ignore_sim=false])
if test ! -d "${srcdir}/../sim"; then
ignore_sim=true
fi
SIM=
SIM_OBS=
if test "${ignore_sim}" = "false"; then
if test x"${gdb_sim}" != x ; then
SIM="${gdb_sim}"
SIM_OBS="remote-sim.o"
AC_DEFINE(WITH_SIM, 1, [Define if the simulator is being linked in.])
# Some tdep code should only be compiled in when the ppc sim is
# built. PR sim/13418.
case $target in
powerpc*-*-*)
AC_DEFINE(WITH_PPC_SIM, 1, [Define if the PPC simulator is being linked in.])
;;
esac
fi
fi
AC_SUBST(SIM)
AC_SUBST(SIM_OBS)
AC_SUBST(ENABLE_CFLAGS)
AC_SUBST(PROFILE_CFLAGS)
AC_SUBST(CONFIG_OBS)
AC_SUBST(CONFIG_DEPS)
AC_SUBST(CONFIG_SRCS)
AC_SUBST(CONFIG_ALL)
AC_SUBST(CONFIG_CLEAN)
AC_SUBST(CONFIG_INSTALL)
AC_SUBST(CONFIG_UNINSTALL)
# List of host floatformats.
AC_DEFINE_UNQUOTED(GDB_HOST_FLOAT_FORMAT,$gdb_host_float_format,[Host float floatformat])
AC_DEFINE_UNQUOTED(GDB_HOST_DOUBLE_FORMAT,$gdb_host_double_format,[Host double floatformat])
AC_DEFINE_UNQUOTED(GDB_HOST_LONG_DOUBLE_FORMAT,$gdb_host_long_double_format,[Host long double floatformat])
# target_subdir is used by the testsuite to find the target libraries.
target_subdir=
if test "${host}" != "${target}"; then
target_subdir="${target_alias}/"
fi
AC_SUBST(target_subdir)
# Import nat definitions.
nat_makefile_frag=/dev/null
if test "${gdb_native}" = "yes"; then
. ${srcdir}/configure.nat
nativefile=$NAT_FILE
fi
AC_SUBST(NAT_FILE)
AC_SUBST(NATDEPFILES)
AC_SUBST(NAT_CDEPS)
AC_SUBST(LOADLIBES)
AC_SUBST(MH_CFLAGS)
AC_SUBST(XM_CLIBS)
AC_SUBST(NAT_GENERATED_FILES)
AC_SUBST(HAVE_NATIVE_GCORE_HOST)
AC_SUBST_FILE(nat_makefile_frag)
if test x"${gdb_osabi}" != x ; then
AC_DEFINE_UNQUOTED(GDB_OSABI_DEFAULT, $gdb_osabi,
[Define to the default OS ABI for this configuration.])
fi
# Check for babeltrace and babeltrace-ctf
AC_ARG_WITH(babeltrace,
AS_HELP_STRING([--with-babeltrace], [include babeltrace support (auto/yes/no)]),
[], [with_babeltrace=auto])
AC_MSG_CHECKING([whether to use babeltrace])
AC_MSG_RESULT([$with_babeltrace])
if test "x$with_babeltrace" = "xno"; then
AC_MSG_WARN([babletrace support disabled; GDB is unable to read CTF data.])
else
# Append -Werror to CFLAGS so that configure can catch the warning
# "assignment from incompatible pointer type", which is related to
# the babeltrace change from 1.0.3 to 1.1.0. Babeltrace 1.1.0 works
# in GDB, while babeltrace 1.0.3 is broken.
# AC_LIB_HAVE_LINKFLAGS may modify CPPFLAGS in it, so it should be
# safe to save and restore CFLAGS here.
saved_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -Werror"
AC_LIB_HAVE_LINKFLAGS([babeltrace], [babeltrace-ctf],
[#include <babeltrace/babeltrace.h>
#include <babeltrace/ctf/events.h>
#include <babeltrace/ctf/iterator.h>],
[struct bt_iter_pos *pos = bt_iter_get_pos (bt_ctf_get_iter (NULL));
struct bt_ctf_event *event = NULL;
const struct bt_definition *scope;
pos->type = BT_SEEK_BEGIN;
bt_iter_set_pos (bt_ctf_get_iter (NULL), pos);
scope = bt_ctf_get_top_level_scope (event,
BT_STREAM_EVENT_HEADER);
bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "id"));
])
CFLAGS=$saved_CFLAGS
if test "$HAVE_LIBBABELTRACE" != yes; then
if test "$with_babeltrace" = yes; then
AC_MSG_ERROR([babeltrace is missing or unusable])
else
AC_MSG_WARN([babeltrace is missing or unusable; GDB is unable to read CTF data.])
fi
fi
fi
# Check for xxhash
AC_ARG_WITH(xxhash,
AS_HELP_STRING([--with-xxhash], [use libxxhash for hashing (faster) (auto/yes/no)]),
[], [with_xxhash=auto])
GCC_ENABLE([libctf], [yes], [], [Handle .ctf type-info sections])
if test x${enable_static} = xno; then
LIBCTF="-Wl,--rpath,../libctf/.libs ../libctf/.libs/libctf.so"
CTF_DEPS="../libctf/.libs/libctf.so"
else
LIBCTF="../libctf/.libs/libctf.a"
CTF_DEPS="$LIBCTF"
fi
if test "${enable_libctf}" = yes; then
AC_DEFINE(ENABLE_LIBCTF, 1, [Handle .ctf type-info sections])
else
LIBCTF=
CTF_DEPS=
fi
AC_SUBST(LIBCTF)
AC_SUBST(CTF_DEPS)
# If nativefile (NAT_FILE) is not set in configure.nat, we link to an
# empty version.
if test "x$with_xxhash" != "xno"; then
AC_LIB_HAVE_LINKFLAGS([xxhash], [],
[#include <xxhash.h>],
[XXH32("foo", 3, 0);
])
if test "$HAVE_LIBXXHASH" != yes; then
if test "$with_xxhash" = yes; then
AC_MSG_ERROR([xxhash is missing or unusable])
fi
fi
if test "x$with_xxhash" = "xauto"; then
with_xxhash="$HAVE_LIBXXHASH"
fi
fi
AC_MSG_CHECKING([whether to use xxhash])
AC_MSG_RESULT([$with_xxhash])
NM_H=
rm -f nm.h
if test "${nativefile}" != ""; then
case "${nativefile}" in
nm-*.h ) GDB_NM_FILE="config/${gdb_host_cpu}/${nativefile}" ;;
* ) GDB_NM_FILE="${nativefile}"
esac
AC_CONFIG_LINKS([nm.h:$GDB_NM_FILE], [echo > stamp-nmh],
[GDB_NM_FILE=$GDB_NM_FILE])
AC_DEFINE_UNQUOTED(GDB_NM_FILE, "${GDB_NM_FILE}", [nativefile])
NM_H=nm.h
fi
AC_SUBST(GDB_NM_FILE)
AC_SUBST(NM_H)
dnl Add dependency for xsltproc if building with maintainer-mode enabled.
AC_PATH_PROGS(XSLTPROC, xsltproc, missing)
if test "x$USE_MAINTAINER_MODE" = xyes; then
if test "${XSLTPROC}" = missing; then
AC_MSG_ERROR(unable to find xsltproc. maintainer-mode requires xsltproc.)
fi
fi
AC_SUBST(XSLTPROC)
dnl Check for exe extension set on certain hosts (e.g. Win32)
AC_EXEEXT
dnl Detect the character set used by this host.
dnl At the moment, we just assume it's UTF-8.
AC_DEFINE(GDB_DEFAULT_HOST_CHARSET, "UTF-8",
[Define to be a string naming the default host character set.])
GDB_AC_SELFTEST([
CONFIG_OBS="$CONFIG_OBS \$(SELFTESTS_OBS)"
CONFIG_SRCS="$CONFIG_SRCS \$(SELFTESTS_SRCS)"
])
GDB_AC_TRANSFORM([gdb], [GDB_TRANSFORM_NAME])
GDB_AC_TRANSFORM([gcore], [GCORE_TRANSFORM_NAME])
AC_CONFIG_FILES([gcore], [chmod +x gcore])
AC_CONFIG_FILES([Makefile gdb-gdb.gdb gdb-gdb.py doc/Makefile data-directory/Makefile])
AC_OUTPUT