binutils-gdb/gdb/i386gnu-nat.c
Ulrich Weigand ac3d87c0d2 Use core regset iterators on GNU Hurd
Remove native-only core file handling on GNU Hurd.  Instead, enable the
x86 target generic core regset logic on the Hurd by providing an
appropriate register offset map.

Thanks to Samuel Thibault for testing!

gdb/

	* config/i386/i386gnu.mh (NATDEPFILES): Remove core-regset.o.
	* i386gnu-nat.c: Do not include <sys/procfs.h> or "gregset.h".
	(CREG_OFFSET, creg_offset, CREG_ADDR): Remove.
	(supply_gregset, supply_fpregset): Remove.
	* i386gnu-tdep.c (i386gnu_gregset_reg_offset): New variable.
	(i386gnu_init_abi): Set tdep->gregset_reg_offset, gregset_num_regs,
	and sizeof_gregset.
2014-12-01 13:42:41 +01:00

437 lines
12 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Low level interface to i386 running the GNU Hurd.
Copyright (C) 1992-2014 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "x86-nat.h"
#include "inferior.h"
#include "floatformat.h"
#include "regcache.h"
#include <mach.h>
#include <mach_error.h>
#include <mach/message.h>
#include <mach/exception.h>
#include "i386-tdep.h"
#include "gnu-nat.h"
#include "inf-child.h"
#include "i387-tdep.h"
/* Offset to the thread_state_t location where REG is stored. */
#define REG_OFFSET(reg) offsetof (struct i386_thread_state, reg)
/* At REG_OFFSET[N] is the offset to the thread_state_t location where
the GDB register N is stored. */
static int reg_offset[] =
{
REG_OFFSET (eax), REG_OFFSET (ecx), REG_OFFSET (edx), REG_OFFSET (ebx),
REG_OFFSET (uesp), REG_OFFSET (ebp), REG_OFFSET (esi), REG_OFFSET (edi),
REG_OFFSET (eip), REG_OFFSET (efl), REG_OFFSET (cs), REG_OFFSET (ss),
REG_OFFSET (ds), REG_OFFSET (es), REG_OFFSET (fs), REG_OFFSET (gs)
};
#define REG_ADDR(state, regnum) ((char *)(state) + reg_offset[regnum])
/* Get the whole floating-point state of THREAD and record the values
of the corresponding (pseudo) registers. */
static void
fetch_fpregs (struct regcache *regcache, struct proc *thread)
{
mach_msg_type_number_t count = i386_FLOAT_STATE_COUNT;
struct i386_float_state state;
error_t err;
err = thread_get_state (thread->port, i386_FLOAT_STATE,
(thread_state_t) &state, &count);
if (err)
{
warning (_("Couldn't fetch floating-point state from %s"),
proc_string (thread));
return;
}
if (!state.initialized)
{
/* The floating-point state isn't initialized. */
i387_supply_fsave (regcache, -1, NULL);
}
else
{
/* Supply the floating-point registers. */
i387_supply_fsave (regcache, -1, state.hw_state);
}
}
/* Fetch register REGNO, or all regs if REGNO is -1. */
static void
gnu_fetch_registers (struct target_ops *ops,
struct regcache *regcache, int regno)
{
struct proc *thread;
/* Make sure we know about new threads. */
inf_update_procs (gnu_current_inf);
thread = inf_tid_to_thread (gnu_current_inf,
ptid_get_lwp (inferior_ptid));
if (!thread)
error (_("Can't fetch registers from thread %s: No such thread"),
target_pid_to_str (inferior_ptid));
if (regno < I386_NUM_GREGS || regno == -1)
{
thread_state_t state;
/* This does the dirty work for us. */
state = proc_get_state (thread, 0);
if (!state)
{
warning (_("Couldn't fetch registers from %s"),
proc_string (thread));
return;
}
if (regno == -1)
{
int i;
proc_debug (thread, "fetching all register");
for (i = 0; i < I386_NUM_GREGS; i++)
regcache_raw_supply (regcache, i, REG_ADDR (state, i));
thread->fetched_regs = ~0;
}
else
{
proc_debug (thread, "fetching register %s",
gdbarch_register_name (get_regcache_arch (regcache),
regno));
regcache_raw_supply (regcache, regno,
REG_ADDR (state, regno));
thread->fetched_regs |= (1 << regno);
}
}
if (regno >= I386_NUM_GREGS || regno == -1)
{
proc_debug (thread, "fetching floating-point registers");
fetch_fpregs (regcache, thread);
}
}
/* Store the whole floating-point state into THREAD using information
from the corresponding (pseudo) registers. */
static void
store_fpregs (const struct regcache *regcache, struct proc *thread, int regno)
{
mach_msg_type_number_t count = i386_FLOAT_STATE_COUNT;
struct i386_float_state state;
error_t err;
err = thread_get_state (thread->port, i386_FLOAT_STATE,
(thread_state_t) &state, &count);
if (err)
{
warning (_("Couldn't fetch floating-point state from %s"),
proc_string (thread));
return;
}
/* FIXME: kettenis/2001-07-15: Is this right? Should we somehow
take into account DEPRECATED_REGISTER_VALID like the old code did? */
i387_collect_fsave (regcache, regno, state.hw_state);
err = thread_set_state (thread->port, i386_FLOAT_STATE,
(thread_state_t) &state, i386_FLOAT_STATE_COUNT);
if (err)
{
warning (_("Couldn't store floating-point state into %s"),
proc_string (thread));
return;
}
}
/* Store at least register REGNO, or all regs if REGNO == -1. */
static void
gnu_store_registers (struct target_ops *ops,
struct regcache *regcache, int regno)
{
struct proc *thread;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
/* Make sure we know about new threads. */
inf_update_procs (gnu_current_inf);
thread = inf_tid_to_thread (gnu_current_inf,
ptid_get_lwp (inferior_ptid));
if (!thread)
error (_("Couldn't store registers into thread %s: No such thread"),
target_pid_to_str (inferior_ptid));
if (regno < I386_NUM_GREGS || regno == -1)
{
thread_state_t state;
thread_state_data_t old_state;
int was_aborted = thread->aborted;
int was_valid = thread->state_valid;
int trace;
if (!was_aborted && was_valid)
memcpy (&old_state, &thread->state, sizeof (old_state));
state = proc_get_state (thread, 1);
if (!state)
{
warning (_("Couldn't store registers into %s"),
proc_string (thread));
return;
}
/* Save the T bit. We might try to restore the %eflags register
below, but changing the T bit would seriously confuse GDB. */
trace = ((struct i386_thread_state *)state)->efl & 0x100;
if (!was_aborted && was_valid)
/* See which registers have changed after aborting the thread. */
{
int check_regno;
for (check_regno = 0; check_regno < I386_NUM_GREGS; check_regno++)
if ((thread->fetched_regs & (1 << check_regno))
&& memcpy (REG_ADDR (&old_state, check_regno),
REG_ADDR (state, check_regno),
register_size (gdbarch, check_regno)))
/* Register CHECK_REGNO has changed! Ack! */
{
warning (_("Register %s changed after the thread was aborted"),
gdbarch_register_name (gdbarch, check_regno));
if (regno >= 0 && regno != check_regno)
/* Update GDB's copy of the register. */
regcache_raw_supply (regcache, check_regno,
REG_ADDR (state, check_regno));
else
warning (_("... also writing this register! "
"Suspicious..."));
}
}
if (regno == -1)
{
int i;
proc_debug (thread, "storing all registers");
for (i = 0; i < I386_NUM_GREGS; i++)
if (REG_VALID == regcache_register_status (regcache, i))
regcache_raw_collect (regcache, i, REG_ADDR (state, i));
}
else
{
proc_debug (thread, "storing register %s",
gdbarch_register_name (gdbarch, regno));
gdb_assert (REG_VALID == regcache_register_status (regcache, regno));
regcache_raw_collect (regcache, regno, REG_ADDR (state, regno));
}
/* Restore the T bit. */
((struct i386_thread_state *)state)->efl &= ~0x100;
((struct i386_thread_state *)state)->efl |= trace;
}
if (regno >= I386_NUM_GREGS || regno == -1)
{
proc_debug (thread, "storing floating-point registers");
store_fpregs (regcache, thread, regno);
}
}
/* Support for debug registers. */
#ifdef i386_DEBUG_STATE
/* Get debug registers for thread THREAD. */
static void
i386_gnu_dr_get (struct i386_debug_state *regs, struct proc *thread)
{
mach_msg_type_number_t count = i386_DEBUG_STATE_COUNT;
error_t err;
err = thread_get_state (thread->port, i386_DEBUG_STATE,
(thread_state_t) regs, &count);
if (err != 0 || count != i386_DEBUG_STATE_COUNT)
warning (_("Couldn't fetch debug state from %s"),
proc_string (thread));
}
/* Set debug registers for thread THREAD. */
static void
i386_gnu_dr_set (const struct i386_debug_state *regs, struct proc *thread)
{
error_t err;
err = thread_set_state (thread->port, i386_DEBUG_STATE,
(thread_state_t) regs, i386_DEBUG_STATE_COUNT);
if (err != 0)
warning (_("Couldn't store debug state into %s"),
proc_string (thread));
}
/* Set DR_CONTROL in THREAD. */
static void
i386_gnu_dr_set_control_one (struct proc *thread, void *arg)
{
unsigned long *control = arg;
struct i386_debug_state regs;
i386_gnu_dr_get (&regs, thread);
regs.dr[DR_CONTROL] = *control;
i386_gnu_dr_set (&regs, thread);
}
/* Set DR_CONTROL to CONTROL in all threads. */
static void
i386_gnu_dr_set_control (unsigned long control)
{
inf_update_procs (gnu_current_inf);
inf_threads (gnu_current_inf, i386_gnu_dr_set_control_one, &control);
}
/* Parameters to set a debugging address. */
struct reg_addr
{
int regnum; /* Register number (zero based). */
CORE_ADDR addr; /* Address. */
};
/* Set address REGNUM (zero based) to ADDR in THREAD. */
static void
i386_gnu_dr_set_addr_one (struct proc *thread, void *arg)
{
struct reg_addr *reg_addr = arg;
struct i386_debug_state regs;
i386_gnu_dr_get (&regs, thread);
regs.dr[reg_addr->regnum] = reg_addr->addr;
i386_gnu_dr_set (&regs, thread);
}
/* Set address REGNUM (zero based) to ADDR in all threads. */
static void
i386_gnu_dr_set_addr (int regnum, CORE_ADDR addr)
{
struct reg_addr reg_addr;
gdb_assert (DR_FIRSTADDR <= regnum && regnum <= DR_LASTADDR);
reg_addr.regnum = regnum;
reg_addr.addr = addr;
inf_update_procs (gnu_current_inf);
inf_threads (gnu_current_inf, i386_gnu_dr_set_addr_one, &reg_addr);
}
/* Get debug register REGNUM value from only the one LWP of PTID. */
static unsigned long
i386_gnu_dr_get_reg (ptid_t ptid, int regnum)
{
struct i386_debug_state regs;
struct proc *thread;
/* Make sure we know about new threads. */
inf_update_procs (gnu_current_inf);
thread = inf_tid_to_thread (gnu_current_inf, ptid_get_lwp (ptid));
i386_gnu_dr_get (&regs, thread);
return regs.dr[regnum];
}
/* Return the inferior's debug register REGNUM. */
static CORE_ADDR
i386_gnu_dr_get_addr (int regnum)
{
gdb_assert (DR_FIRSTADDR <= regnum && regnum <= DR_LASTADDR);
return i386_gnu_dr_get_reg (inferior_ptid, regnum);
}
/* Get DR_STATUS from only the one thread of INFERIOR_PTID. */
static unsigned long
i386_gnu_dr_get_status (void)
{
return i386_gnu_dr_get_reg (inferior_ptid, DR_STATUS);
}
/* Return the inferior's DR7 debug control register. */
static unsigned long
i386_gnu_dr_get_control (void)
{
return i386_gnu_dr_get_reg (inferior_ptid, DR_CONTROL);
}
#endif /* i386_DEBUG_STATE */
/* Provide a prototype to silence -Wmissing-prototypes. */
extern initialize_file_ftype _initialize_i386gnu_nat;
void
_initialize_i386gnu_nat (void)
{
struct target_ops *t;
/* Fill in the generic GNU/Hurd methods. */
t = gnu_target ();
#ifdef i386_DEBUG_STATE
x86_use_watchpoints (t);
x86_dr_low.set_control = i386_gnu_dr_set_control;
gdb_assert (DR_FIRSTADDR == 0 && DR_LASTADDR < i386_DEBUG_STATE_COUNT);
x86_dr_low.set_addr = i386_gnu_dr_set_addr;
x86_dr_low.get_addr = i386_gnu_dr_get_addr;
x86_dr_low.get_status = i386_gnu_dr_get_status;
x86_dr_low.get_control = i386_gnu_dr_get_control;
x86_set_debug_register_length (4);
#endif /* i386_DEBUG_STATE */
t->to_fetch_registers = gnu_fetch_registers;
t->to_store_registers = gnu_store_registers;
/* Register the target. */
add_target (t);
}