Joern Rennecke 2532761bdf sh-dsp support, simulator speedup by using host byte order: ... * Makefile.in (interp.o): Depends on ppi.c . (ppi.c): New rule. * gencode.c (printonmatch, think, genopc): Deleted. (MAX_NR_STUFF): Now 42. (tab): Add SH-DSP CPU instructions. Amalgamate ldc / stc / lds / sts instructions with similar bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>. Fix semantics of lds.l @<REG_N>+,MACH (no sign extend). (movsxy_tab): New array. For movs, change MMMM field to GGGG, and mmmm field to MMMM. Added entries for movx, movy and parallel processing insns. (ppi_tab): New array. (qfunc): Stabilize sort. (expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy. Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'. (dumptable): Now takes three arguments. Changed all callers. Emit just one contigous jump table. (filltable): Now takes an argument. Changed all callers. Make index static. (ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions. (gensim_caselist): New function, broken out of gensim. Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'. Handle ref '9'. (gensim): Handle 'N' in code field and '8' in refs field. Call gensim_caselist - twice. (ppi_index): New static variable. (main): Unsupport default action. Add dsp support for -x / -s option. Add -p option. * interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare. (saved_state_type): Rearrange to allow amalgamated ldc / stc / lds / sts to work efficiently. (target_dsp): New static variable. (GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change. (FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise. (SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise. (RS, RE, MOD, MOD_ME, DSP_R): Likewise. (set_fpscr1): Likewise. Use target_dsp to check for dsp. (MOD_MSi, SIG_BUS_FETCH): Deleted. (CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros. (SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise. (SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME. (set_sr): Reflect saved_state_type change. Fix SR_RB handling. Use SET_MOD. (MA, L, TL, TB): Now controlled by ACE_FAST. (SEXT32): Just cast to int. (SIGN32): Fixed to only shift by 31. (CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0. (ppi_insn): Declare. (ppi.c): Include. (init_dsp): Set target_dsp. When it changes, switch end of sh_jump_table with sh_dsp_table. (sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead. Don't Declare PR if it's #defined. Fix single-stepping (Was broken in Mar 6 16:59:10 patch). (sim_store_register, sim_read_register): Translate accesses to reflect saved_state_type change. * interp.c (set_sr): Set sr. (SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros. (set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp. (DSP_R): Fix definition. (sim_resume): Remove outdated SET_SR use. * interp.c (saved_state): New members for struct member asregs: rs, re, insn_end, xram_start, yram_start. (struct loop_bounds): New struct. (SKIP_INSN): New macro. (get_loop_bounds): New function. (endianw): Renamed to global_endianw. (maskw): negated bits. (PC): Now insn_ptr. (SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros. (RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise. (M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise. (SIG_BUS_FETCH): Likewise (raise_exception, riat_fast): New functions. (raise_buserror, sim_stop): Use raise_exception. (PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start. (BUSERROR, WRITE_BUSERROR, READ_BUSERROR): Reverse sense of mask argument. (FP_OP, set_dr): Use RAISE_EXCEPTION. (wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast): Declare. Remove redundant masking. (wwat_fast, rwat_fast): Add argument endianw. Changed callers. (MA): Updated for change pc -> PC. (Delay_Slot): Use RIAT. (empty): Deleted. (trap): Remove argument little_endian. Add argument endianw. Changed all callers. Use raise_exception. (macw): Add argument endainw. Changed all callers. (init_dsp): New function, extended after broken out of init_pointers. (sim_resume): Replace pc with insn_ptr. Replace little_endian with endianw. Replace nia with nip. Reverse sense of maskb / maskw / maskl. Implement logic for zero-overhead loops. Don't try to interpret garbage when getting a SIGBUS at insn fetch. (sim_open): Call init_dsp. * gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H / RAISE_EXCEPTION where appropriate. Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr. * interp.c (sim_store_register, sim_fetch_register): Do proper endianness switch. * interp.c (saved_state_type): New members for struct member asregs: xymem_select, xmem, ymem, xmem_offset, ymem_offset. (special_address): Delete. (BUSERROR): Now a two-argument predicate. (PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros. (wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete. (process_wlat_addr, process_wwat_addr): New functions. (process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise. (process_rbat_addr): Likewise. (wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR. (rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete. (rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR. (RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions. (do_rdat, trap): Delete SLOW code. (SEXT32, SIGN32): New macros. (swap, swap16): Now integer in - integer out. Changed all callers. (strswaplen, strnswap): Delete SLOW versions. (init_pointers): Initialize dsp memory selection (preliminary). (sim_store_register, sim_fetch_register): Use swap instead of big / little endian read / write functions. * interp.c (maskl): Deleted. (endianw, endianb): New variables. (special_address): Now inline. (bp_holder): Put raising of buserror there, rename to: (raise_buserror). (BUSERROR): Now yields a value. Changed all users. (wbat_big): Delete. (wlat_fast, wwat_fast, wbat_fast): New functions. (rlat_fast, rwat_fast, rbat_fast): Likewise. (RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions. (do_rdat, do_wdat): Likewise. Take maskl argument instead of little_endian one. Changed caller macros. (swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly. (strswaplen, strnswap): New functions. (trap): Use them to fix up endian mismatches; disable SYS_execve and SYS_execv; fix double address translation for SYS_pipe and SYS_stat. (sym_write, sym_read): Add endianness translation. (sym_store_register, sym_fetch_register): Add maskl local variable. (sim_open): Set endianw and endianb.		2000-06-07 14:59:16 +00:00
..
acconfig.h
ChangeLog
config.in
configure
configure.in
gencode.c
interp.c
Makefile.in	sh-dsp support, simulator speedup by using host byte order:	2000-06-07 14:59:16 +00:00
syscall.h
tconfig.in