mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-27 04:52:05 +08:00
c8693053f8
GDB currently doesn't build on 32-bit Solaris: * On Solaris 11.4/x86: In file included from /usr/include/sys/procfs.h:26, from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24: /usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment" #error "Cannot use procfs in the large file compilation environment" ^~~~~ * On Solaris 11.3/x86 there are several more instances of this. The interaction between procfs and large-file support historically has been a royal mess on Solaris: * There are two versions of the procfs interface: ** The old ioctl-based /proc, deprecated and not used any longer in either gdb or binutils. ** The `new' (introduced in Solaris 2.6, 1997) structured /proc. * There are two headers one can possibly include: ** <procfs.h> which only provides the structured /proc, definining _STRUCTURED_PROC=1 and then including ... ** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based /proc, but provides structured /proc if _STRUCTURED_PROC == 1. * procfs and the large-file environment didn't go well together: ** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit compilations when the large-file environment was active (_FILE_OFFSET_BITS == 64). ** In both Solaris 11.4 and Illumos, this restriction was lifted for structured /proc. So one has to be careful always to define _STRUCTURED_PROC=1 when testing for or using <sys/procfs.h> on Solaris. As the errors above show, this isn't always the case in binutils-gdb right now. Also one may need to disable large-file support for 32-bit compilations on Solaris. config/largefile.m4 meant to do this by wrapping the AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because it neglects the _STRUCTURED_PROC part. To make things even worse, since GCC 9 g++ predefines _FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to enable large-file support, this has no effect, breaking the gdb build. This patch addresses all this as follows: * All tests for the <sys/procfs.h> header are made with _STRUCTURED_PROC=1, the definition going into the various config.h files instead of having to make them (and sometimes failing) in the affected sources. * To cope with the g++ predefine of _FILE_OFFSET_BITS=64, -U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had been far easier to have just #undef _FILE_OFFSET_BITS in config.h, but unfortunately such a construct in config.in is commented by config.status irrespective of indentation and whitespace if large-file support is disabled. I found no way around this and putting the #undef in several global headers for bfd, binutils, ld, and gdb seemed way more invasive. * Last, the applicability check in largefile.m4 was modified only to disable largefile support if really needed. To do so, it checks if <sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it doesn't, the disabling only happens if gdb exists in-tree and isn't disabled, otherwise (building binutils from a tarball), there's no conflict. What initially confused me was the check for $plugins here, which originally caused the disabling not to take place. Since AC_PLUGINGS does enable plugin support if <dlfcn.h> exists (which it does on Solaris), the disabling never happened. I could find no explanation why the linker plugin needs large-file support but thought it would be enough if gld and GCC's lto-plugin agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not enough: lto-plugin uses the simple-object interface from libiberty, which includes off_t arguments. So to fully disable large-file support would mean also disabling it in libiberty and its users: gcc and libstdc++-v3. This seems highly undesirable, so I decided to disable the linker plugin instead if large-file support won't work. The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to predefined _FILE_OFFSET_BITS=64). Also regtested on amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4), x86_64-pc-linux-gnu and i686-pc-linux-gnu. config: * largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>: Check for <sys/procfs.h> incompatilibity with large-file support on Solaris. Only disable large-file support and perhaps plugins if needed. Set, substitute LARGEFILE_CPPFLAGS if so. bfd: * bfd.m4 (BFD_SYS_PROCFS_H): New macro. (BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H. Don't define _STRUCTURED_PROC. (BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise. * elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define. * configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * configure, config.in: Regenerate. * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. binutils: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gas: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in, doc/Makefile.in: Regenerate. * configure: Regenerate. gdb: * proc-api.c (_STRUCTURED_PROC): Don't define. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * procfs.c: Likewise. * Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * configure, config.in: Regenerate. gdbserver: * configure, config.in: Regenerate. gdbsupport: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>. * Makefile.in: Regenerate. * configure, config.in: Regenerate. gnulib: * configure.ac: Run ACX_LARGEFILE before gl_EARLY. * configure: Regenerate. gprof: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate. ld: * Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS. * Makefile.in: Regenerate. * configure: Regenerate.
436 lines
12 KiB
C
436 lines
12 KiB
C
/* Machine independent support for Solaris /proc (process file system) for GDB.
|
|
|
|
Copyright (C) 1999-2020 Free Software Foundation, Inc.
|
|
|
|
Written by Michael Snyder at Cygnus Solutions.
|
|
Based on work by Fred Fish, Stu Grossman, Geoff Noer, and others.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
/*
|
|
* Pretty-print trace of api calls to the /proc api
|
|
*/
|
|
|
|
#include "defs.h"
|
|
#include "gdbcmd.h"
|
|
#include "completer.h"
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/procfs.h>
|
|
#include <sys/proc.h> /* for struct proc */
|
|
#include <sys/user.h> /* for struct user */
|
|
#include <fcntl.h> /* for O_RDWR etc. */
|
|
#include "gdbsupport/gdb_wait.h"
|
|
|
|
#include "proc-utils.h"
|
|
|
|
/* Much of the information used in the /proc interface, particularly for
|
|
printing status information, is kept as tables of structures of the
|
|
following form. These tables can be used to map numeric values to
|
|
their symbolic names and to a string that describes their specific use. */
|
|
|
|
struct trans {
|
|
long value; /* The numeric value */
|
|
const char *name; /* The equivalent symbolic value */
|
|
const char *desc; /* Short description of value */
|
|
};
|
|
|
|
static bool procfs_trace = false;
|
|
static FILE *procfs_file = NULL;
|
|
static char *procfs_filename;
|
|
|
|
static void
|
|
prepare_to_trace (void)
|
|
{
|
|
if (procfs_trace) /* if procfs tracing turned on */
|
|
if (procfs_file == NULL) /* if output file not yet open */
|
|
procfs_file = fopen (procfs_filename, "a"); /* open output file */
|
|
}
|
|
|
|
static void
|
|
set_procfs_trace_cmd (const char *args,
|
|
int from_tty, struct cmd_list_element *c)
|
|
{
|
|
#if 0 /* not sure what I might actually need to do here, if anything */
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
set_procfs_file_cmd (const char *args,
|
|
int from_tty, struct cmd_list_element *c)
|
|
{
|
|
/* Just changed the filename for procfs tracing.
|
|
If a file was already open, close it. */
|
|
if (procfs_file)
|
|
fclose (procfs_file);
|
|
procfs_file = NULL;
|
|
}
|
|
|
|
static struct trans rw_table[] = {
|
|
{ PCAGENT, "PCAGENT", "create agent lwp with regs from argument" },
|
|
{ PCCFAULT, "PCCFAULT", "clear current fault" },
|
|
{ PCCSIG, "PCCSIG", "clear current signal" },
|
|
{ PCDSTOP, "PCDSTOP", "post stop request" },
|
|
{ PCKILL, "PCKILL", "post a signal" },
|
|
{ PCNICE, "PCNICE", "set nice priority" },
|
|
{ PCREAD, "PCREAD", "read from the address space" },
|
|
{ PCWRITE, "PCWRITE", "write to the address space" },
|
|
{ PCRUN, "PCRUN", "make process/lwp runnable" },
|
|
{ PCSASRS, "PCSASRS", "set ancillary state registers" },
|
|
{ PCSCRED, "PCSCRED", "set process credentials" },
|
|
{ PCSENTRY, "PCSENTRY", "set traced syscall entry set" },
|
|
{ PCSET, "PCSET", "set modes" },
|
|
{ PCSEXIT, "PCSEXIT", "set traced syscall exit set" },
|
|
{ PCSFAULT, "PCSFAULT", "set traced fault set" },
|
|
{ PCSFPREG, "PCSFPREG", "set floating point registers" },
|
|
{ PCSHOLD, "PCSHOLD", "set signal mask" },
|
|
{ PCSREG, "PCSREG", "set general registers" },
|
|
{ PCSSIG, "PCSSIG", "set current signal" },
|
|
{ PCSTOP, "PCSTOP", "post stop request and wait" },
|
|
{ PCSTRACE, "PCSTRACE", "set traced signal set" },
|
|
{ PCSVADDR, "PCSVADDR", "set pc virtual address" },
|
|
{ PCSXREG, "PCSXREG", "set extra registers" },
|
|
{ PCTWSTOP, "PCTWSTOP", "wait for stop, with timeout arg" },
|
|
{ PCUNKILL, "PCUNKILL", "delete a pending signal" },
|
|
{ PCUNSET, "PCUNSET", "unset modes" },
|
|
{ PCWATCH, "PCWATCH", "set/unset watched memory area" },
|
|
{ PCWSTOP, "PCWSTOP", "wait for process/lwp to stop, no timeout" },
|
|
{ 0, NULL, NULL }
|
|
};
|
|
|
|
static off_t lseek_offset;
|
|
|
|
int
|
|
write_with_trace (int fd, void *varg, size_t len, char *file, int line)
|
|
{
|
|
int i = ARRAY_SIZE (rw_table) - 1;
|
|
int ret;
|
|
procfs_ctl_t *arg = (procfs_ctl_t *) varg;
|
|
|
|
prepare_to_trace ();
|
|
if (procfs_trace)
|
|
{
|
|
procfs_ctl_t opcode = arg[0];
|
|
for (i = 0; rw_table[i].name != NULL; i++)
|
|
if (rw_table[i].value == opcode)
|
|
break;
|
|
|
|
if (info_verbose)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"%s:%d -- ", file, line);
|
|
switch (opcode) {
|
|
case PCSET:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCSET, %s) %s\n",
|
|
arg[1] == PR_FORK ? "PR_FORK" :
|
|
arg[1] == PR_RLC ? "PR_RLC" :
|
|
arg[1] == PR_ASYNC ? "PR_ASYNC" :
|
|
"<unknown flag>",
|
|
info_verbose ? rw_table[i].desc : "");
|
|
break;
|
|
case PCUNSET:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCRESET, %s) %s\n",
|
|
arg[1] == PR_FORK ? "PR_FORK" :
|
|
arg[1] == PR_RLC ? "PR_RLC" :
|
|
arg[1] == PR_ASYNC ? "PR_ASYNC" :
|
|
"<unknown flag>",
|
|
info_verbose ? rw_table[i].desc : "");
|
|
break;
|
|
case PCSTRACE:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCSTRACE) ");
|
|
proc_prettyfprint_signalset (procfs_file ? procfs_file : stdout,
|
|
(sigset_t *) &arg[1], 0);
|
|
break;
|
|
case PCSFAULT:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCSFAULT) ");
|
|
proc_prettyfprint_faultset (procfs_file ? procfs_file : stdout,
|
|
(fltset_t *) &arg[1], 0);
|
|
break;
|
|
case PCSENTRY:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCSENTRY) ");
|
|
proc_prettyfprint_syscalls (procfs_file ? procfs_file : stdout,
|
|
(sysset_t *) &arg[1], 0);
|
|
break;
|
|
case PCSEXIT:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCSEXIT) ");
|
|
proc_prettyfprint_syscalls (procfs_file ? procfs_file : stdout,
|
|
(sysset_t *) &arg[1], 0);
|
|
break;
|
|
case PCSHOLD:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCSHOLD) ");
|
|
proc_prettyfprint_signalset (procfs_file ? procfs_file : stdout,
|
|
(sigset_t *) &arg[1], 0);
|
|
break;
|
|
case PCSSIG:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCSSIG) ");
|
|
proc_prettyfprint_signal (procfs_file ? procfs_file : stdout,
|
|
arg[1] ? ((siginfo_t *) &arg[1])->si_signo
|
|
: 0,
|
|
0);
|
|
fprintf (procfs_file ? procfs_file : stdout, "\n");
|
|
break;
|
|
case PCRUN:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCRUN) ");
|
|
if (arg[1] & PRCSIG)
|
|
fprintf (procfs_file ? procfs_file : stdout, "clearSig ");
|
|
if (arg[1] & PRCFAULT)
|
|
fprintf (procfs_file ? procfs_file : stdout, "clearFlt ");
|
|
if (arg[1] & PRSTEP)
|
|
fprintf (procfs_file ? procfs_file : stdout, "step ");
|
|
if (arg[1] & PRSABORT)
|
|
fprintf (procfs_file ? procfs_file : stdout, "syscallAbort ");
|
|
if (arg[1] & PRSTOP)
|
|
fprintf (procfs_file ? procfs_file : stdout, "stopReq ");
|
|
|
|
fprintf (procfs_file ? procfs_file : stdout, "\n");
|
|
break;
|
|
case PCKILL:
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (PCKILL) ");
|
|
proc_prettyfprint_signal (procfs_file ? procfs_file : stdout,
|
|
arg[1], 0);
|
|
fprintf (procfs_file ? procfs_file : stdout, "\n");
|
|
break;
|
|
default:
|
|
{
|
|
if (rw_table[i].name)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (%s) %s\n",
|
|
rw_table[i].name,
|
|
info_verbose ? rw_table[i].desc : "");
|
|
else
|
|
{
|
|
if (lseek_offset != -1)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (<unknown>, %lud bytes at 0x%08lx) \n",
|
|
(unsigned long) len, (unsigned long) lseek_offset);
|
|
else
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"write (<unknown>, %lud bytes) \n",
|
|
(unsigned long) len);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
}
|
|
errno = 0;
|
|
ret = write (fd, (void *) arg, len);
|
|
if (procfs_trace && ret != len)
|
|
{
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"[write (%s) FAILED! (%s)]\n",
|
|
rw_table[i].name != NULL ?
|
|
rw_table[i].name : "<unknown>",
|
|
safe_strerror (errno));
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
}
|
|
|
|
lseek_offset = -1;
|
|
return ret;
|
|
}
|
|
|
|
off_t
|
|
lseek_with_trace (int fd, off_t offset, int whence, char *file, int line)
|
|
{
|
|
off_t ret;
|
|
|
|
prepare_to_trace ();
|
|
errno = 0;
|
|
ret = lseek (fd, offset, whence);
|
|
lseek_offset = ret;
|
|
if (procfs_trace && (ret == -1 || errno != 0))
|
|
{
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"[lseek (0x%08lx) FAILED! (%s)]\n",
|
|
(unsigned long) offset, safe_strerror (errno));
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
open_with_trace (char *filename, int mode, char *file, int line)
|
|
{
|
|
int ret;
|
|
|
|
prepare_to_trace ();
|
|
errno = 0;
|
|
ret = open (filename, mode);
|
|
if (procfs_trace)
|
|
{
|
|
if (info_verbose)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"%s:%d -- ", file, line);
|
|
|
|
if (errno)
|
|
{
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"[open FAILED! (%s) line %d]\\n",
|
|
safe_strerror (errno), line);
|
|
}
|
|
else
|
|
{
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"%d = open (%s, ", ret, filename);
|
|
if (mode == O_RDONLY)
|
|
fprintf (procfs_file ? procfs_file : stdout, "O_RDONLY) %d\n",
|
|
line);
|
|
else if (mode == O_WRONLY)
|
|
fprintf (procfs_file ? procfs_file : stdout, "O_WRONLY) %d\n",
|
|
line);
|
|
else if (mode == O_RDWR)
|
|
fprintf (procfs_file ? procfs_file : stdout, "O_RDWR) %d\n",
|
|
line);
|
|
}
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
close_with_trace (int fd, char *file, int line)
|
|
{
|
|
int ret;
|
|
|
|
prepare_to_trace ();
|
|
errno = 0;
|
|
ret = close (fd);
|
|
if (procfs_trace)
|
|
{
|
|
if (info_verbose)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"%s:%d -- ", file, line);
|
|
if (errno)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"[close FAILED! (%s)]\n", safe_strerror (errno));
|
|
else
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"%d = close (%d)\n", ret, fd);
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
pid_t
|
|
wait_with_trace (int *wstat, char *file, int line)
|
|
{
|
|
int ret, lstat = 0;
|
|
|
|
prepare_to_trace ();
|
|
if (procfs_trace)
|
|
{
|
|
if (info_verbose)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"%s:%d -- ", file, line);
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"wait (line %d) ", line);
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
}
|
|
errno = 0;
|
|
ret = wait (&lstat);
|
|
if (procfs_trace)
|
|
{
|
|
if (errno)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"[wait FAILED! (%s)]\n", safe_strerror (errno));
|
|
else
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"returned pid %d, status 0x%x\n", ret, lstat);
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
}
|
|
if (wstat)
|
|
*wstat = lstat;
|
|
|
|
return ret;
|
|
}
|
|
|
|
void
|
|
procfs_note (const char *msg, const char *file, int line)
|
|
{
|
|
prepare_to_trace ();
|
|
if (procfs_trace)
|
|
{
|
|
if (info_verbose)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"%s:%d -- ", file, line);
|
|
fprintf (procfs_file ? procfs_file : stdout, "%s", msg);
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
}
|
|
}
|
|
|
|
void
|
|
proc_prettyfprint_status (long flags, int why, int what, int thread)
|
|
{
|
|
prepare_to_trace ();
|
|
if (procfs_trace)
|
|
{
|
|
if (thread)
|
|
fprintf (procfs_file ? procfs_file : stdout,
|
|
"Thread %d: ", thread);
|
|
|
|
proc_prettyfprint_flags (procfs_file ? procfs_file : stdout,
|
|
flags, 0);
|
|
|
|
if (flags & (PR_STOPPED | PR_ISTOP))
|
|
proc_prettyfprint_why (procfs_file ? procfs_file : stdout,
|
|
why, what, 0);
|
|
if (procfs_file)
|
|
fflush (procfs_file);
|
|
}
|
|
}
|
|
|
|
void _initialize_proc_api ();
|
|
void
|
|
_initialize_proc_api ()
|
|
{
|
|
add_setshow_boolean_cmd ("procfs-trace", no_class, &procfs_trace, _("\
|
|
Set tracing for /proc api calls."), _("\
|
|
Show tracing for /proc api calls."), NULL,
|
|
set_procfs_trace_cmd,
|
|
NULL, /* FIXME: i18n: */
|
|
&setlist, &showlist);
|
|
|
|
procfs_filename = xstrdup ("procfs_trace");
|
|
add_setshow_filename_cmd ("procfs-file", no_class, &procfs_filename, _("\
|
|
Set filename for /proc tracefile."), _("\
|
|
Show filename for /proc tracefile."), NULL,
|
|
set_procfs_file_cmd,
|
|
NULL, /* FIXME: i18n: */
|
|
&setlist, &showlist);
|
|
}
|