binutils-gdb/gdb/values.c
Stu Grossman 6c310da826 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
ENABLE_OBS, and THREAD_DB_OBS.  These are consolidated into LIBS
	and CONFIG_OBS.
	* configure configure.in:  Clean up test cases around thread support.
start-sanitize-v850
	* configure.tgt (v850-*-*):  Include v850ice.o and v850.lib if
	host is Windows.
end-sanitize-v850
	* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
	printcmd.c valops.c value.h values.c:  Add bfd_section arg to
	value_at and value_at_lazy.
	* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
	Add bfd_section arg to prim_record_minimal_symbol_and_info.
	* corefile.c gdbcore.h printcmd.c valops.c:  Use read_memory_section
	instead of read_memory.  It takes a bfd_section arg.
	* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h:  Remove
	unnecessary cast for assignment of struct dbx_symfile_info.
	Struct objfile now uses a real pointer instead of PTR for this
	element.
	* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
	text, data and bss into dbx_symfile_info.
	* exec.c (xfer_memory):  Handle transfers for user-specified
	sections.
	* findvar.c (read_var_value locate_var_value):  Copy bfd section
	from the symbol to the value.
	* gdb-stabs.h:  Add section pointers for text, data and bss
	sections.
	* maint.c (translate address command):  Add test code for overlay
	address translation.
	* printcmd.c (do_examine do_one_display):  Now takes a bfd section
	arg.
	* (print_formatted x_command):  Record current section along with
	current address for repeated commands.
	* sparc-nat.c (fetch_inferior_registers):  Change
	target_xfer_memory to target_{read write}_memory to allow changes
	to target_xfer_memory interface for section info.
	* symmisc.c (dump_msymbols print_symbol):  Print section
	assocaited with symbol.
	* symtab.c (fixup_symbol_section):  New routine to
	add section info to symbols returned by lookup_symbol.
	* symtab.h (struct general_symbol_info):  Add bfd section to
	symbols.
	* target.c target.h (target_xfer_memory):  Add bfd section to
	args.
	* (target_read_memory_section):  New routine to read data from a
	specific section.
	* (target_memory_bfd_section):  New global variable to pass bfd
	section in to targets.
	* valarith.c (value_add value_addr value_array):  Preserve bfd
	section when computing new value.
	* value.h (struct value):  Add bfd section to values.
	* values.c (allocate_value value_copy):  Initialize/preserve bfd
	section.
	* (unpack_double):  Clean up _MSC_VER conditionals to remove
	duplicate code.
start-sanitize-v850
	* v850ice.c:  New module to support communication with NEC's
	PC-based ICE.
	* config/v850/tm-v850.h (REGISTER_NAMES):  Replace sp, gp, fp, and
	ep names with rxx names.  sp and fp are renamed via a different
	mechanism.
end-sanitize-v850
1997-01-04 00:25:53 +00:00

1428 lines
42 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Low level packing and unpacking of values for GDB, the GNU Debugger.
Copyright 1986, 1987, 1989, 1991, 1993, 1994, 1995, 1996
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "gdb_string.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "value.h"
#include "gdbcore.h"
#include "frame.h"
#include "command.h"
#include "gdbcmd.h"
#include "target.h"
#include "language.h"
#include "scm-lang.h"
#include "demangle.h"
/* Local function prototypes. */
static value_ptr value_headof PARAMS ((value_ptr, struct type *,
struct type *));
static void show_values PARAMS ((char *, int));
static void show_convenience PARAMS ((char *, int));
static int vb_match PARAMS ((struct type *, int, struct type *));
/* The value-history records all the values printed
by print commands during this session. Each chunk
records 60 consecutive values. The first chunk on
the chain records the most recent values.
The total number of values is in value_history_count. */
#define VALUE_HISTORY_CHUNK 60
struct value_history_chunk
{
struct value_history_chunk *next;
value_ptr values[VALUE_HISTORY_CHUNK];
};
/* Chain of chunks now in use. */
static struct value_history_chunk *value_history_chain;
static int value_history_count; /* Abs number of last entry stored */
/* List of all value objects currently allocated
(except for those released by calls to release_value)
This is so they can be freed after each command. */
static value_ptr all_values;
/* Allocate a value that has the correct length for type TYPE. */
value_ptr
allocate_value (type)
struct type *type;
{
register value_ptr val;
struct type *atype = check_typedef (type);
val = (struct value *) xmalloc (sizeof (struct value) + TYPE_LENGTH (atype));
VALUE_NEXT (val) = all_values;
all_values = val;
VALUE_TYPE (val) = type;
VALUE_LVAL (val) = not_lval;
VALUE_ADDRESS (val) = 0;
VALUE_FRAME (val) = 0;
VALUE_OFFSET (val) = 0;
VALUE_BITPOS (val) = 0;
VALUE_BITSIZE (val) = 0;
VALUE_REGNO (val) = -1;
VALUE_LAZY (val) = 0;
VALUE_OPTIMIZED_OUT (val) = 0;
VALUE_BFD_SECTION (val) = NULL;
val->modifiable = 1;
return val;
}
/* Allocate a value that has the correct length
for COUNT repetitions type TYPE. */
value_ptr
allocate_repeat_value (type, count)
struct type *type;
int count;
{
int low_bound = current_language->string_lower_bound; /* ??? */
/* FIXME-type-allocation: need a way to free this type when we are
done with it. */
struct type *range_type
= create_range_type ((struct type *) NULL, builtin_type_int,
low_bound, count + low_bound - 1);
/* FIXME-type-allocation: need a way to free this type when we are
done with it. */
return allocate_value (create_array_type ((struct type *) NULL,
type, range_type));
}
/* Return a mark in the value chain. All values allocated after the
mark is obtained (except for those released) are subject to being freed
if a subsequent value_free_to_mark is passed the mark. */
value_ptr
value_mark ()
{
return all_values;
}
/* Free all values allocated since MARK was obtained by value_mark
(except for those released). */
void
value_free_to_mark (mark)
value_ptr mark;
{
value_ptr val, next;
for (val = all_values; val && val != mark; val = next)
{
next = VALUE_NEXT (val);
value_free (val);
}
all_values = val;
}
/* Free all the values that have been allocated (except for those released).
Called after each command, successful or not. */
void
free_all_values ()
{
register value_ptr val, next;
for (val = all_values; val; val = next)
{
next = VALUE_NEXT (val);
value_free (val);
}
all_values = 0;
}
/* Remove VAL from the chain all_values
so it will not be freed automatically. */
void
release_value (val)
register value_ptr val;
{
register value_ptr v;
if (all_values == val)
{
all_values = val->next;
return;
}
for (v = all_values; v; v = v->next)
{
if (v->next == val)
{
v->next = val->next;
break;
}
}
}
/* Release all values up to mark */
value_ptr
value_release_to_mark (mark)
value_ptr mark;
{
value_ptr val, next;
for (val = next = all_values; next; next = VALUE_NEXT (next))
if (VALUE_NEXT (next) == mark)
{
all_values = VALUE_NEXT (next);
VALUE_NEXT (next) = 0;
return val;
}
all_values = 0;
return val;
}
/* Return a copy of the value ARG.
It contains the same contents, for same memory address,
but it's a different block of storage. */
value_ptr
value_copy (arg)
value_ptr arg;
{
register struct type *type = VALUE_TYPE (arg);
register value_ptr val = allocate_value (type);
VALUE_LVAL (val) = VALUE_LVAL (arg);
VALUE_ADDRESS (val) = VALUE_ADDRESS (arg);
VALUE_OFFSET (val) = VALUE_OFFSET (arg);
VALUE_BITPOS (val) = VALUE_BITPOS (arg);
VALUE_BITSIZE (val) = VALUE_BITSIZE (arg);
VALUE_FRAME (val) = VALUE_FRAME (arg);
VALUE_REGNO (val) = VALUE_REGNO (arg);
VALUE_LAZY (val) = VALUE_LAZY (arg);
VALUE_OPTIMIZED_OUT (val) = VALUE_OPTIMIZED_OUT (arg);
VALUE_BFD_SECTION (val) = VALUE_BFD_SECTION (arg);
val->modifiable = arg->modifiable;
if (!VALUE_LAZY (val))
{
memcpy (VALUE_CONTENTS_RAW (val), VALUE_CONTENTS_RAW (arg),
TYPE_LENGTH (VALUE_TYPE (arg)));
}
return val;
}
/* Access to the value history. */
/* Record a new value in the value history.
Returns the absolute history index of the entry.
Result of -1 indicates the value was not saved; otherwise it is the
value history index of this new item. */
int
record_latest_value (val)
value_ptr val;
{
int i;
/* We don't want this value to have anything to do with the inferior anymore.
In particular, "set $1 = 50" should not affect the variable from which
the value was taken, and fast watchpoints should be able to assume that
a value on the value history never changes. */
if (VALUE_LAZY (val))
value_fetch_lazy (val);
/* We preserve VALUE_LVAL so that the user can find out where it was fetched
from. This is a bit dubious, because then *&$1 does not just return $1
but the current contents of that location. c'est la vie... */
val->modifiable = 0;
release_value (val);
/* Here we treat value_history_count as origin-zero
and applying to the value being stored now. */
i = value_history_count % VALUE_HISTORY_CHUNK;
if (i == 0)
{
register struct value_history_chunk *new
= (struct value_history_chunk *)
xmalloc (sizeof (struct value_history_chunk));
memset (new->values, 0, sizeof new->values);
new->next = value_history_chain;
value_history_chain = new;
}
value_history_chain->values[i] = val;
/* Now we regard value_history_count as origin-one
and applying to the value just stored. */
return ++value_history_count;
}
/* Return a copy of the value in the history with sequence number NUM. */
value_ptr
access_value_history (num)
int num;
{
register struct value_history_chunk *chunk;
register int i;
register int absnum = num;
if (absnum <= 0)
absnum += value_history_count;
if (absnum <= 0)
{
if (num == 0)
error ("The history is empty.");
else if (num == 1)
error ("There is only one value in the history.");
else
error ("History does not go back to $$%d.", -num);
}
if (absnum > value_history_count)
error ("History has not yet reached $%d.", absnum);
absnum--;
/* Now absnum is always absolute and origin zero. */
chunk = value_history_chain;
for (i = (value_history_count - 1) / VALUE_HISTORY_CHUNK - absnum / VALUE_HISTORY_CHUNK;
i > 0; i--)
chunk = chunk->next;
return value_copy (chunk->values[absnum % VALUE_HISTORY_CHUNK]);
}
/* Clear the value history entirely.
Must be done when new symbol tables are loaded,
because the type pointers become invalid. */
void
clear_value_history ()
{
register struct value_history_chunk *next;
register int i;
register value_ptr val;
while (value_history_chain)
{
for (i = 0; i < VALUE_HISTORY_CHUNK; i++)
if ((val = value_history_chain->values[i]) != NULL)
free ((PTR)val);
next = value_history_chain->next;
free ((PTR)value_history_chain);
value_history_chain = next;
}
value_history_count = 0;
}
static void
show_values (num_exp, from_tty)
char *num_exp;
int from_tty;
{
register int i;
register value_ptr val;
static int num = 1;
if (num_exp)
{
/* "info history +" should print from the stored position.
"info history <exp>" should print around value number <exp>. */
if (num_exp[0] != '+' || num_exp[1] != '\0')
num = parse_and_eval_address (num_exp) - 5;
}
else
{
/* "info history" means print the last 10 values. */
num = value_history_count - 9;
}
if (num <= 0)
num = 1;
for (i = num; i < num + 10 && i <= value_history_count; i++)
{
val = access_value_history (i);
printf_filtered ("$%d = ", i);
value_print (val, gdb_stdout, 0, Val_pretty_default);
printf_filtered ("\n");
}
/* The next "info history +" should start after what we just printed. */
num += 10;
/* Hitting just return after this command should do the same thing as
"info history +". If num_exp is null, this is unnecessary, since
"info history +" is not useful after "info history". */
if (from_tty && num_exp)
{
num_exp[0] = '+';
num_exp[1] = '\0';
}
}
/* Internal variables. These are variables within the debugger
that hold values assigned by debugger commands.
The user refers to them with a '$' prefix
that does not appear in the variable names stored internally. */
static struct internalvar *internalvars;
/* Look up an internal variable with name NAME. NAME should not
normally include a dollar sign.
If the specified internal variable does not exist,
one is created, with a void value. */
struct internalvar *
lookup_internalvar (name)
char *name;
{
register struct internalvar *var;
for (var = internalvars; var; var = var->next)
if (STREQ (var->name, name))
return var;
var = (struct internalvar *) xmalloc (sizeof (struct internalvar));
var->name = concat (name, NULL);
var->value = allocate_value (builtin_type_void);
release_value (var->value);
var->next = internalvars;
internalvars = var;
return var;
}
value_ptr
value_of_internalvar (var)
struct internalvar *var;
{
register value_ptr val;
#ifdef IS_TRAPPED_INTERNALVAR
if (IS_TRAPPED_INTERNALVAR (var->name))
return VALUE_OF_TRAPPED_INTERNALVAR (var);
#endif
val = value_copy (var->value);
if (VALUE_LAZY (val))
value_fetch_lazy (val);
VALUE_LVAL (val) = lval_internalvar;
VALUE_INTERNALVAR (val) = var;
return val;
}
void
set_internalvar_component (var, offset, bitpos, bitsize, newval)
struct internalvar *var;
int offset, bitpos, bitsize;
value_ptr newval;
{
register char *addr = VALUE_CONTENTS (var->value) + offset;
#ifdef IS_TRAPPED_INTERNALVAR
if (IS_TRAPPED_INTERNALVAR (var->name))
SET_TRAPPED_INTERNALVAR (var, newval, bitpos, bitsize, offset);
#endif
if (bitsize)
modify_field (addr, value_as_long (newval),
bitpos, bitsize);
else
memcpy (addr, VALUE_CONTENTS (newval), TYPE_LENGTH (VALUE_TYPE (newval)));
}
void
set_internalvar (var, val)
struct internalvar *var;
value_ptr val;
{
value_ptr newval;
#ifdef IS_TRAPPED_INTERNALVAR
if (IS_TRAPPED_INTERNALVAR (var->name))
SET_TRAPPED_INTERNALVAR (var, val, 0, 0, 0);
#endif
newval = value_copy (val);
newval->modifiable = 1;
/* Force the value to be fetched from the target now, to avoid problems
later when this internalvar is referenced and the target is gone or
has changed. */
if (VALUE_LAZY (newval))
value_fetch_lazy (newval);
/* Begin code which must not call error(). If var->value points to
something free'd, an error() obviously leaves a dangling pointer.
But we also get a danling pointer if var->value points to
something in the value chain (i.e., before release_value is
called), because after the error free_all_values will get called before
long. */
free ((PTR)var->value);
var->value = newval;
release_value (newval);
/* End code which must not call error(). */
}
char *
internalvar_name (var)
struct internalvar *var;
{
return var->name;
}
/* Free all internalvars. Done when new symtabs are loaded,
because that makes the values invalid. */
void
clear_internalvars ()
{
register struct internalvar *var;
while (internalvars)
{
var = internalvars;
internalvars = var->next;
free ((PTR)var->name);
free ((PTR)var->value);
free ((PTR)var);
}
}
static void
show_convenience (ignore, from_tty)
char *ignore;
int from_tty;
{
register struct internalvar *var;
int varseen = 0;
for (var = internalvars; var; var = var->next)
{
#ifdef IS_TRAPPED_INTERNALVAR
if (IS_TRAPPED_INTERNALVAR (var->name))
continue;
#endif
if (!varseen)
{
varseen = 1;
}
printf_filtered ("$%s = ", var->name);
value_print (var->value, gdb_stdout, 0, Val_pretty_default);
printf_filtered ("\n");
}
if (!varseen)
printf_unfiltered ("No debugger convenience variables now defined.\n\
Convenience variables have names starting with \"$\";\n\
use \"set\" as in \"set $foo = 5\" to define them.\n");
}
/* Extract a value as a C number (either long or double).
Knows how to convert fixed values to double, or
floating values to long.
Does not deallocate the value. */
LONGEST
value_as_long (val)
register value_ptr val;
{
/* This coerces arrays and functions, which is necessary (e.g.
in disassemble_command). It also dereferences references, which
I suspect is the most logical thing to do. */
COERCE_ARRAY (val);
return unpack_long (VALUE_TYPE (val), VALUE_CONTENTS (val));
}
DOUBLEST
value_as_double (val)
register value_ptr val;
{
DOUBLEST foo;
int inv;
foo = unpack_double (VALUE_TYPE (val), VALUE_CONTENTS (val), &inv);
if (inv)
error ("Invalid floating value found in program.");
return foo;
}
/* Extract a value as a C pointer.
Does not deallocate the value. */
CORE_ADDR
value_as_pointer (val)
value_ptr val;
{
/* Assume a CORE_ADDR can fit in a LONGEST (for now). Not sure
whether we want this to be true eventually. */
#if 0
/* ADDR_BITS_REMOVE is wrong if we are being called for a
non-address (e.g. argument to "signal", "info break", etc.), or
for pointers to char, in which the low bits *are* significant. */
return ADDR_BITS_REMOVE(value_as_long (val));
#else
return value_as_long (val);
#endif
}
/* Unpack raw data (copied from debugee, target byte order) at VALADDR
as a long, or as a double, assuming the raw data is described
by type TYPE. Knows how to convert different sizes of values
and can convert between fixed and floating point. We don't assume
any alignment for the raw data. Return value is in host byte order.
If you want functions and arrays to be coerced to pointers, and
references to be dereferenced, call value_as_long() instead.
C++: It is assumed that the front-end has taken care of
all matters concerning pointers to members. A pointer
to member which reaches here is considered to be equivalent
to an INT (or some size). After all, it is only an offset. */
LONGEST
unpack_long (type, valaddr)
struct type *type;
char *valaddr;
{
register enum type_code code = TYPE_CODE (type);
register int len = TYPE_LENGTH (type);
register int nosign = TYPE_UNSIGNED (type);
if (current_language->la_language == language_scm
&& is_scmvalue_type (type))
return scm_unpack (type, valaddr, TYPE_CODE_INT);
switch (code)
{
case TYPE_CODE_TYPEDEF:
return unpack_long (check_typedef (type), valaddr);
case TYPE_CODE_ENUM:
case TYPE_CODE_BOOL:
case TYPE_CODE_INT:
case TYPE_CODE_CHAR:
case TYPE_CODE_RANGE:
if (nosign)
return extract_unsigned_integer (valaddr, len);
else
return extract_signed_integer (valaddr, len);
case TYPE_CODE_FLT:
return extract_floating (valaddr, len);
case TYPE_CODE_PTR:
case TYPE_CODE_REF:
/* Assume a CORE_ADDR can fit in a LONGEST (for now). Not sure
whether we want this to be true eventually. */
return extract_address (valaddr, len);
case TYPE_CODE_MEMBER:
error ("not implemented: member types in unpack_long");
default:
error ("Value can't be converted to integer.");
}
return 0; /* Placate lint. */
}
/* Return a double value from the specified type and address.
INVP points to an int which is set to 0 for valid value,
1 for invalid value (bad float format). In either case,
the returned double is OK to use. Argument is in target
format, result is in host format. */
DOUBLEST
unpack_double (type, valaddr, invp)
struct type *type;
char *valaddr;
int *invp;
{
register enum type_code code = TYPE_CODE (type);
register int len = TYPE_LENGTH (type);
register int nosign = TYPE_UNSIGNED (type);
*invp = 0; /* Assume valid. */
CHECK_TYPEDEF (type);
if (code == TYPE_CODE_FLT)
{
#ifdef INVALID_FLOAT
if (INVALID_FLOAT (valaddr, len))
{
*invp = 1;
return 1.234567891011121314;
}
#endif
return extract_floating (valaddr, len);
}
else if (nosign)
{
/* Unsigned -- be sure we compensate for signed LONGEST. */
#if !defined (_MSC_VER) || (_MSC_VER > 900)
return (ULONGEST) unpack_long (type, valaddr);
#else
/* FIXME!!! msvc22 doesn't support unsigned __int64 -> double */
return (LONGEST) unpack_long (type, valaddr);
#endif /* _MSC_VER */
}
else
{
/* Signed -- we are OK with unpack_long. */
return unpack_long (type, valaddr);
}
}
/* Unpack raw data (copied from debugee, target byte order) at VALADDR
as a CORE_ADDR, assuming the raw data is described by type TYPE.
We don't assume any alignment for the raw data. Return value is in
host byte order.
If you want functions and arrays to be coerced to pointers, and
references to be dereferenced, call value_as_pointer() instead.
C++: It is assumed that the front-end has taken care of
all matters concerning pointers to members. A pointer
to member which reaches here is considered to be equivalent
to an INT (or some size). After all, it is only an offset. */
CORE_ADDR
unpack_pointer (type, valaddr)
struct type *type;
char *valaddr;
{
/* Assume a CORE_ADDR can fit in a LONGEST (for now). Not sure
whether we want this to be true eventually. */
return unpack_long (type, valaddr);
}
/* Given a value ARG1 (offset by OFFSET bytes)
of a struct or union type ARG_TYPE,
extract and return the value of one of its fields.
FIELDNO says which field.
For C++, must also be able to return values from static fields */
value_ptr
value_primitive_field (arg1, offset, fieldno, arg_type)
register value_ptr arg1;
int offset;
register int fieldno;
register struct type *arg_type;
{
register value_ptr v;
register struct type *type;
CHECK_TYPEDEF (arg_type);
type = TYPE_FIELD_TYPE (arg_type, fieldno);
/* Handle packed fields */
offset += TYPE_FIELD_BITPOS (arg_type, fieldno) / 8;
if (TYPE_FIELD_BITSIZE (arg_type, fieldno))
{
v = value_from_longest (type,
unpack_field_as_long (arg_type,
VALUE_CONTENTS (arg1),
fieldno));
VALUE_BITPOS (v) = TYPE_FIELD_BITPOS (arg_type, fieldno) % 8;
VALUE_BITSIZE (v) = TYPE_FIELD_BITSIZE (arg_type, fieldno);
}
else
{
v = allocate_value (type);
if (VALUE_LAZY (arg1))
VALUE_LAZY (v) = 1;
else
memcpy (VALUE_CONTENTS_RAW (v), VALUE_CONTENTS_RAW (arg1) + offset,
TYPE_LENGTH (type));
}
VALUE_LVAL (v) = VALUE_LVAL (arg1);
if (VALUE_LVAL (arg1) == lval_internalvar)
VALUE_LVAL (v) = lval_internalvar_component;
VALUE_ADDRESS (v) = VALUE_ADDRESS (arg1);
VALUE_OFFSET (v) = offset + VALUE_OFFSET (arg1);
return v;
}
/* Given a value ARG1 of a struct or union type,
extract and return the value of one of its fields.
FIELDNO says which field.
For C++, must also be able to return values from static fields */
value_ptr
value_field (arg1, fieldno)
register value_ptr arg1;
register int fieldno;
{
return value_primitive_field (arg1, 0, fieldno, VALUE_TYPE (arg1));
}
/* Return a non-virtual function as a value.
F is the list of member functions which contains the desired method.
J is an index into F which provides the desired method. */
value_ptr
value_fn_field (arg1p, f, j, type, offset)
value_ptr *arg1p;
struct fn_field *f;
int j;
struct type *type;
int offset;
{
register value_ptr v;
register struct type *ftype = TYPE_FN_FIELD_TYPE (f, j);
struct symbol *sym;
sym = lookup_symbol (TYPE_FN_FIELD_PHYSNAME (f, j),
0, VAR_NAMESPACE, 0, NULL);
if (! sym)
return NULL;
/*
error ("Internal error: could not find physical method named %s",
TYPE_FN_FIELD_PHYSNAME (f, j));
*/
v = allocate_value (ftype);
VALUE_ADDRESS (v) = BLOCK_START (SYMBOL_BLOCK_VALUE (sym));
VALUE_TYPE (v) = ftype;
if (arg1p)
{
if (type != VALUE_TYPE (*arg1p))
*arg1p = value_ind (value_cast (lookup_pointer_type (type),
value_addr (*arg1p)));
/* Move the `this' pointer according to the offset.
VALUE_OFFSET (*arg1p) += offset;
*/
}
return v;
}
/* Return a virtual function as a value.
ARG1 is the object which provides the virtual function
table pointer. *ARG1P is side-effected in calling this function.
F is the list of member functions which contains the desired virtual
function.
J is an index into F which provides the desired virtual function.
TYPE is the type in which F is located. */
value_ptr
value_virtual_fn_field (arg1p, f, j, type, offset)
value_ptr *arg1p;
struct fn_field *f;
int j;
struct type *type;
int offset;
{
value_ptr arg1 = *arg1p;
struct type *type1 = check_typedef (VALUE_TYPE (arg1));
struct type *entry_type;
/* First, get the virtual function table pointer. That comes
with a strange type, so cast it to type `pointer to long' (which
should serve just fine as a function type). Then, index into
the table, and convert final value to appropriate function type. */
value_ptr entry, vfn, vtbl;
value_ptr vi = value_from_longest (builtin_type_int,
(LONGEST) TYPE_FN_FIELD_VOFFSET (f, j));
struct type *fcontext = TYPE_FN_FIELD_FCONTEXT (f, j);
struct type *context;
if (fcontext == NULL)
/* We don't have an fcontext (e.g. the program was compiled with
g++ version 1). Try to get the vtbl from the TYPE_VPTR_BASETYPE.
This won't work right for multiple inheritance, but at least we
should do as well as GDB 3.x did. */
fcontext = TYPE_VPTR_BASETYPE (type);
context = lookup_pointer_type (fcontext);
/* Now context is a pointer to the basetype containing the vtbl. */
if (TYPE_TARGET_TYPE (context) != type1)
{
arg1 = value_ind (value_cast (context, value_addr (arg1)));
type1 = check_typedef (VALUE_TYPE (arg1));
}
context = type1;
/* Now context is the basetype containing the vtbl. */
/* This type may have been defined before its virtual function table
was. If so, fill in the virtual function table entry for the
type now. */
if (TYPE_VPTR_FIELDNO (context) < 0)
fill_in_vptr_fieldno (context);
/* The virtual function table is now an array of structures
which have the form { int16 offset, delta; void *pfn; }. */
vtbl = value_ind (value_primitive_field (arg1, 0,
TYPE_VPTR_FIELDNO (context),
TYPE_VPTR_BASETYPE (context)));
/* Index into the virtual function table. This is hard-coded because
looking up a field is not cheap, and it may be important to save
time, e.g. if the user has set a conditional breakpoint calling
a virtual function. */
entry = value_subscript (vtbl, vi);
entry_type = check_typedef (VALUE_TYPE (entry));
if (TYPE_CODE (entry_type) == TYPE_CODE_STRUCT)
{
/* Move the `this' pointer according to the virtual function table. */
VALUE_OFFSET (arg1) += value_as_long (value_field (entry, 0));
if (! VALUE_LAZY (arg1))
{
VALUE_LAZY (arg1) = 1;
value_fetch_lazy (arg1);
}
vfn = value_field (entry, 2);
}
else if (TYPE_CODE (entry_type) == TYPE_CODE_PTR)
vfn = entry;
else
error ("I'm confused: virtual function table has bad type");
/* Reinstantiate the function pointer with the correct type. */
VALUE_TYPE (vfn) = lookup_pointer_type (TYPE_FN_FIELD_TYPE (f, j));
*arg1p = arg1;
return vfn;
}
/* ARG is a pointer to an object we know to be at least
a DTYPE. BTYPE is the most derived basetype that has
already been searched (and need not be searched again).
After looking at the vtables between BTYPE and DTYPE,
return the most derived type we find. The caller must
be satisfied when the return value == DTYPE.
FIXME-tiemann: should work with dossier entries as well. */
static value_ptr
value_headof (in_arg, btype, dtype)
value_ptr in_arg;
struct type *btype, *dtype;
{
/* First collect the vtables we must look at for this object. */
/* FIXME-tiemann: right now, just look at top-most vtable. */
value_ptr arg, vtbl, entry, best_entry = 0;
int i, nelems;
int offset, best_offset = 0;
struct symbol *sym;
CORE_ADDR pc_for_sym;
char *demangled_name;
struct minimal_symbol *msymbol;
btype = TYPE_VPTR_BASETYPE (dtype);
CHECK_TYPEDEF (btype);
arg = in_arg;
if (btype != dtype)
arg = value_cast (lookup_pointer_type (btype), arg);
vtbl = value_ind (value_field (value_ind (arg), TYPE_VPTR_FIELDNO (btype)));
/* Check that VTBL looks like it points to a virtual function table. */
msymbol = lookup_minimal_symbol_by_pc (VALUE_ADDRESS (vtbl));
if (msymbol == NULL
|| (demangled_name = SYMBOL_NAME (msymbol)) == NULL
|| !VTBL_PREFIX_P (demangled_name))
{
/* If we expected to find a vtable, but did not, let the user
know that we aren't happy, but don't throw an error.
FIXME: there has to be a better way to do this. */
struct type *error_type = (struct type *)xmalloc (sizeof (struct type));
memcpy (error_type, VALUE_TYPE (in_arg), sizeof (struct type));
TYPE_NAME (error_type) = savestring ("suspicious *", sizeof ("suspicious *"));
VALUE_TYPE (in_arg) = error_type;
return in_arg;
}
/* Now search through the virtual function table. */
entry = value_ind (vtbl);
nelems = longest_to_int (value_as_long (value_field (entry, 2)));
for (i = 1; i <= nelems; i++)
{
entry = value_subscript (vtbl, value_from_longest (builtin_type_int,
(LONGEST) i));
/* This won't work if we're using thunks. */
if (TYPE_CODE (check_typedef (VALUE_TYPE (entry))) != TYPE_CODE_STRUCT)
break;
offset = longest_to_int (value_as_long (value_field (entry, 0)));
/* If we use '<=' we can handle single inheritance
* where all offsets are zero - just use the first entry found. */
if (offset <= best_offset)
{
best_offset = offset;
best_entry = entry;
}
}
/* Move the pointer according to BEST_ENTRY's offset, and figure
out what type we should return as the new pointer. */
if (best_entry == 0)
{
/* An alternative method (which should no longer be necessary).
* But we leave it in for future use, when we will hopefully
* have optimizes the vtable to use thunks instead of offsets. */
/* Use the name of vtable itself to extract a base type. */
demangled_name += 4; /* Skip _vt$ prefix. */
}
else
{
pc_for_sym = value_as_pointer (value_field (best_entry, 2));
sym = find_pc_function (pc_for_sym);
demangled_name = cplus_demangle (SYMBOL_NAME (sym), DMGL_ANSI);
*(strchr (demangled_name, ':')) = '\0';
}
sym = lookup_symbol (demangled_name, 0, VAR_NAMESPACE, 0, 0);
if (sym == NULL)
error ("could not find type declaration for `%s'", demangled_name);
if (best_entry)
{
free (demangled_name);
arg = value_add (value_cast (builtin_type_int, arg),
value_field (best_entry, 0));
}
else arg = in_arg;
VALUE_TYPE (arg) = lookup_pointer_type (SYMBOL_TYPE (sym));
return arg;
}
/* ARG is a pointer object of type TYPE. If TYPE has virtual
function tables, probe ARG's tables (including the vtables
of its baseclasses) to figure out the most derived type that ARG
could actually be a pointer to. */
value_ptr
value_from_vtable_info (arg, type)
value_ptr arg;
struct type *type;
{
/* Take care of preliminaries. */
if (TYPE_VPTR_FIELDNO (type) < 0)
fill_in_vptr_fieldno (type);
if (TYPE_VPTR_FIELDNO (type) < 0)
return 0;
return value_headof (arg, 0, type);
}
/* Return true if the INDEXth field of TYPE is a virtual baseclass
pointer which is for the base class whose type is BASECLASS. */
static int
vb_match (type, index, basetype)
struct type *type;
int index;
struct type *basetype;
{
struct type *fieldtype;
char *name = TYPE_FIELD_NAME (type, index);
char *field_class_name = NULL;
if (*name != '_')
return 0;
/* gcc 2.4 uses _vb$. */
if (name[1] == 'v' && name[2] == 'b' && is_cplus_marker (name[3]))
field_class_name = name + 4;
/* gcc 2.5 will use __vb_. */
if (name[1] == '_' && name[2] == 'v' && name[3] == 'b' && name[4] == '_')
field_class_name = name + 5;
if (field_class_name == NULL)
/* This field is not a virtual base class pointer. */
return 0;
/* It's a virtual baseclass pointer, now we just need to find out whether
it is for this baseclass. */
fieldtype = TYPE_FIELD_TYPE (type, index);
if (fieldtype == NULL
|| TYPE_CODE (fieldtype) != TYPE_CODE_PTR)
/* "Can't happen". */
return 0;
/* What we check for is that either the types are equal (needed for
nameless types) or have the same name. This is ugly, and a more
elegant solution should be devised (which would probably just push
the ugliness into symbol reading unless we change the stabs format). */
if (TYPE_TARGET_TYPE (fieldtype) == basetype)
return 1;
if (TYPE_NAME (basetype) != NULL
&& TYPE_NAME (TYPE_TARGET_TYPE (fieldtype)) != NULL
&& STREQ (TYPE_NAME (basetype),
TYPE_NAME (TYPE_TARGET_TYPE (fieldtype))))
return 1;
return 0;
}
/* Compute the offset of the baseclass which is
the INDEXth baseclass of class TYPE,
for value at VALADDR (in host) at ADDRESS (in target).
The result is the offset of the baseclass value relative
to (the address of)(ARG) + OFFSET.
-1 is returned on error. */
int
baseclass_offset (type, index, valaddr, address)
struct type *type;
int index;
char *valaddr;
CORE_ADDR address;
{
struct type *basetype = TYPE_BASECLASS (type, index);
if (BASETYPE_VIA_VIRTUAL (type, index))
{
/* Must hunt for the pointer to this virtual baseclass. */
register int i, len = TYPE_NFIELDS (type);
register int n_baseclasses = TYPE_N_BASECLASSES (type);
/* First look for the virtual baseclass pointer
in the fields. */
for (i = n_baseclasses; i < len; i++)
{
if (vb_match (type, i, basetype))
{
CORE_ADDR addr
= unpack_pointer (TYPE_FIELD_TYPE (type, i),
valaddr + (TYPE_FIELD_BITPOS (type, i) / 8));
return addr - (LONGEST) address;
}
}
/* Not in the fields, so try looking through the baseclasses. */
for (i = index+1; i < n_baseclasses; i++)
{
int boffset =
baseclass_offset (type, i, valaddr, address);
if (boffset)
return boffset;
}
/* Not found. */
return -1;
}
/* Baseclass is easily computed. */
return TYPE_BASECLASS_BITPOS (type, index) / 8;
}
/* Unpack a field FIELDNO of the specified TYPE, from the anonymous object at
VALADDR.
Extracting bits depends on endianness of the machine. Compute the
number of least significant bits to discard. For big endian machines,
we compute the total number of bits in the anonymous object, subtract
off the bit count from the MSB of the object to the MSB of the
bitfield, then the size of the bitfield, which leaves the LSB discard
count. For little endian machines, the discard count is simply the
number of bits from the LSB of the anonymous object to the LSB of the
bitfield.
If the field is signed, we also do sign extension. */
LONGEST
unpack_field_as_long (type, valaddr, fieldno)
struct type *type;
char *valaddr;
int fieldno;
{
ULONGEST val;
ULONGEST valmask;
int bitpos = TYPE_FIELD_BITPOS (type, fieldno);
int bitsize = TYPE_FIELD_BITSIZE (type, fieldno);
int lsbcount;
val = extract_unsigned_integer (valaddr + bitpos / 8, sizeof (val));
/* Extract bits. See comment above. */
if (BITS_BIG_ENDIAN)
lsbcount = (sizeof val * 8 - bitpos % 8 - bitsize);
else
lsbcount = (bitpos % 8);
val >>= lsbcount;
/* If the field does not entirely fill a LONGEST, then zero the sign bits.
If the field is signed, and is negative, then sign extend. */
if ((bitsize > 0) && (bitsize < 8 * (int) sizeof (val)))
{
valmask = (((ULONGEST) 1) << bitsize) - 1;
val &= valmask;
if (!TYPE_UNSIGNED (TYPE_FIELD_TYPE (type, fieldno)))
{
if (val & (valmask ^ (valmask >> 1)))
{
val |= ~valmask;
}
}
}
return (val);
}
/* Modify the value of a bitfield. ADDR points to a block of memory in
target byte order; the bitfield starts in the byte pointed to. FIELDVAL
is the desired value of the field, in host byte order. BITPOS and BITSIZE
indicate which bits (in target bit order) comprise the bitfield. */
void
modify_field (addr, fieldval, bitpos, bitsize)
char *addr;
LONGEST fieldval;
int bitpos, bitsize;
{
LONGEST oword;
/* If a negative fieldval fits in the field in question, chop
off the sign extension bits. */
if (bitsize < (8 * (int) sizeof (fieldval))
&& (~fieldval & ~((1 << (bitsize - 1)) - 1)) == 0)
fieldval = fieldval & ((1 << bitsize) - 1);
/* Warn if value is too big to fit in the field in question. */
if (bitsize < (8 * (int) sizeof (fieldval))
&& 0 != (fieldval & ~((1<<bitsize)-1)))
{
/* FIXME: would like to include fieldval in the message, but
we don't have a sprintf_longest. */
warning ("Value does not fit in %d bits.", bitsize);
/* Truncate it, otherwise adjoining fields may be corrupted. */
fieldval = fieldval & ((1 << bitsize) - 1);
}
oword = extract_signed_integer (addr, sizeof oword);
/* Shifting for bit field depends on endianness of the target machine. */
if (BITS_BIG_ENDIAN)
bitpos = sizeof (oword) * 8 - bitpos - bitsize;
/* Mask out old value, while avoiding shifts >= size of oword */
if (bitsize < 8 * (int) sizeof (oword))
oword &= ~(((((ULONGEST)1) << bitsize) - 1) << bitpos);
else
oword &= ~((~(ULONGEST)0) << bitpos);
oword |= fieldval << bitpos;
store_signed_integer (addr, sizeof oword, oword);
}
/* Convert C numbers into newly allocated values */
value_ptr
value_from_longest (type, num)
struct type *type;
register LONGEST num;
{
register value_ptr val = allocate_value (type);
register enum type_code code;
register int len;
retry:
code = TYPE_CODE (type);
len = TYPE_LENGTH (type);
switch (code)
{
case TYPE_CODE_TYPEDEF:
type = check_typedef (type);
goto retry;
case TYPE_CODE_INT:
case TYPE_CODE_CHAR:
case TYPE_CODE_ENUM:
case TYPE_CODE_BOOL:
case TYPE_CODE_RANGE:
store_signed_integer (VALUE_CONTENTS_RAW (val), len, num);
break;
case TYPE_CODE_REF:
case TYPE_CODE_PTR:
/* This assumes that all pointers of a given length
have the same form. */
store_address (VALUE_CONTENTS_RAW (val), len, (CORE_ADDR) num);
break;
default:
error ("Unexpected type encountered for integer constant.");
}
return val;
}
value_ptr
value_from_double (type, num)
struct type *type;
DOUBLEST num;
{
register value_ptr val = allocate_value (type);
struct type *base_type = check_typedef (type);
register enum type_code code = TYPE_CODE (base_type);
register int len = TYPE_LENGTH (base_type);
if (code == TYPE_CODE_FLT)
{
store_floating (VALUE_CONTENTS_RAW (val), len, num);
}
else
error ("Unexpected type encountered for floating constant.");
return val;
}
/* Deal with the value that is "about to be returned". */
/* Return the value that a function returning now
would be returning to its caller, assuming its type is VALTYPE.
RETBUF is where we look for what ought to be the contents
of the registers (in raw form). This is because it is often
desirable to restore old values to those registers
after saving the contents of interest, and then call
this function using the saved values.
struct_return is non-zero when the function in question is
using the structure return conventions on the machine in question;
0 when it is using the value returning conventions (this often
means returning pointer to where structure is vs. returning value). */
value_ptr
value_being_returned (valtype, retbuf, struct_return)
register struct type *valtype;
char retbuf[REGISTER_BYTES];
int struct_return;
/*ARGSUSED*/
{
register value_ptr val;
CORE_ADDR addr;
#if defined (EXTRACT_STRUCT_VALUE_ADDRESS)
/* If this is not defined, just use EXTRACT_RETURN_VALUE instead. */
if (struct_return) {
addr = EXTRACT_STRUCT_VALUE_ADDRESS (retbuf);
if (!addr)
error ("Function return value unknown");
return value_at (valtype, addr, NULL);
}
#endif
val = allocate_value (valtype);
CHECK_TYPEDEF (valtype);
EXTRACT_RETURN_VALUE (valtype, retbuf, VALUE_CONTENTS_RAW (val));
return val;
}
/* Should we use EXTRACT_STRUCT_VALUE_ADDRESS instead of
EXTRACT_RETURN_VALUE? GCC_P is true if compiled with gcc
and TYPE is the type (which is known to be struct, union or array).
On most machines, the struct convention is used unless we are
using gcc and the type is of a special size. */
/* As of about 31 Mar 93, GCC was changed to be compatible with the
native compiler. GCC 2.3.3 was the last release that did it the
old way. Since gcc2_compiled was not changed, we have no
way to correctly win in all cases, so we just do the right thing
for gcc1 and for gcc2 after this change. Thus it loses for gcc
2.0-2.3.3. This is somewhat unfortunate, but changing gcc2_compiled
would cause more chaos than dealing with some struct returns being
handled wrong. */
#if !defined (USE_STRUCT_CONVENTION)
#define USE_STRUCT_CONVENTION(gcc_p, type)\
(!((gcc_p == 1) && (TYPE_LENGTH (value_type) == 1 \
|| TYPE_LENGTH (value_type) == 2 \
|| TYPE_LENGTH (value_type) == 4 \
|| TYPE_LENGTH (value_type) == 8 \
) \
))
#endif
/* Some fundamental types (such as long double) are returned on the stack for
certain architectures. This macro should return true for any type besides
struct, union or array that gets returned on the stack. */
#ifndef RETURN_VALUE_ON_STACK
#define RETURN_VALUE_ON_STACK(TYPE) 0
#endif
/* Return true if the function specified is using the structure returning
convention on this machine to return arguments, or 0 if it is using
the value returning convention. FUNCTION is the value representing
the function, FUNCADDR is the address of the function, and VALUE_TYPE
is the type returned by the function. GCC_P is nonzero if compiled
with GCC. */
int
using_struct_return (function, funcaddr, value_type, gcc_p)
value_ptr function;
CORE_ADDR funcaddr;
struct type *value_type;
int gcc_p;
/*ARGSUSED*/
{
register enum type_code code = TYPE_CODE (value_type);
if (code == TYPE_CODE_ERROR)
error ("Function return type unknown.");
if (code == TYPE_CODE_STRUCT
|| code == TYPE_CODE_UNION
|| code == TYPE_CODE_ARRAY
|| RETURN_VALUE_ON_STACK (value_type))
return USE_STRUCT_CONVENTION (gcc_p, value_type);
return 0;
}
/* Store VAL so it will be returned if a function returns now.
Does not verify that VAL's type matches what the current
function wants to return. */
void
set_return_value (val)
value_ptr val;
{
struct type *type = check_typedef (VALUE_TYPE (val));
register enum type_code code = TYPE_CODE (type);
if (code == TYPE_CODE_ERROR)
error ("Function return type unknown.");
if ( code == TYPE_CODE_STRUCT
|| code == TYPE_CODE_UNION) /* FIXME, implement struct return. */
error ("GDB does not support specifying a struct or union return value.");
STORE_RETURN_VALUE (type, VALUE_CONTENTS (val));
}
void
_initialize_values ()
{
add_cmd ("convenience", no_class, show_convenience,
"Debugger convenience (\"$foo\") variables.\n\
These variables are created when you assign them values;\n\
thus, \"print $foo=1\" gives \"$foo\" the value 1. Values may be any type.\n\n\
A few convenience variables are given values automatically:\n\
\"$_\"holds the last address examined with \"x\" or \"info lines\",\n\
\"$__\" holds the contents of the last address examined with \"x\".",
&showlist);
add_cmd ("values", no_class, show_values,
"Elements of value history around item number IDX (or last ten).",
&showlist);
}