H.J. Lu 14470f0755 x86-64: Fix TLSDESC relaxation for x32 ... For x32, we must encode "lea x@TLSDESC(%rip), %reg" with a REX prefix even if it isn't required. Otherwise linker can’t safely perform GDesc -> IE/LE optimization. X32 TLSDESC sequences can be: 40 8d 05 00 00 00 00 rex lea x@TLSDESC(%rip), %reg ... 67 ff 10 call *x@TLSCALL(%eax) or the same sequence as LP64: 48 8d 05 00 00 00 00 lea foo@TLSDESC(%rip), %reg ... ff 10 call *foo@TLSCALL(%rax) We need to support both sequences for x32. For both GDesc -> IE/LE transitions, 67 ff 10 call *x@TLSCALL(%eax) should relaxed to 0f 1f 00 nopl (%rax) For GDesc -> LE transition, 40 8d 05 00 00 00 00 rex lea x@TLSDESC(%rip), %reg should relaxed to 40 c7 c0 fc ff ff ff rex movl $x@tpoff, %reg For GDesc -> IE transition, 40 8d 05 00 00 00 00 rex lea x@TLSDESC(%rip), %reg should relaxed to 40 8b 05 00 00 00 00 rex movl x@gottpoff(%rip), %eax bfd/ PR ld/25416 * elf64-x86-64.c (elf_x86_64_check_tls_transition): Support "rex leal x@tlsdesc(%rip), %reg" and "call *x@tlsdesc(%eax)" in X32 mode. (elf_x86_64_relocate_section): In x32 mode, for GDesc -> LE transition, relax "rex leal x@tlsdesc(%rip), %reg" to "rex movl $x@tpoff, %reg", for GDesc -> IE transition, relax "rex leal x@tlsdesc(%rip), %reg" to "rex movl x@gottpoff(%rip), %eax". For both transitions, relax "call *(%eax)" to "nopl (%rax)". gas/ PR ld/25416 * config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix for lea with R_X86_64_GOTPC32_TLSDESC relocation when generating x32 object. * testsuite/gas/i386/ilp32/x32-tls.d: Updated. * testsuite/gas/i386/ilp32/x32-tls.s: Add tests for lea with R_X86_64_GOTPC32_TLSDESC relocation. ld/ PR ld/25416 * testsuite/ld-x86-64/pr25416-1.s: New file * testsuite/ld-x86-64/pr25416-1a.d: Likewise. * testsuite/ld-x86-64/pr25416-1b.d: Likewise. * testsuite/ld-x86-64/pr25416-1.s: Likewise. * testsuite/ld-x86-64/pr25416-2.s: Likewise. * testsuite/ld-x86-64/pr25416-2a.d: Likewise. * testsuite/ld-x86-64/pr25416-2b.d: Likewise. * testsuite/ld-x86-64/pr25416-3.d: Likewise. * testsuite/ld-x86-64/pr25416-3.s: Likewise. * testsuite/ld-x86-64/pr25416-4.d: Likewise. * testsuite/ld-x86-64/pr25416-4.s: Likewise. * testsuite/ld-x86-64/pr25416-5a.c: Likewise. * testsuite/ld-x86-64/pr25416-5b.s: Likewise. * testsuite/ld-x86-64/pr25416-5c.s: Likewise. * testsuite/ld-x86-64/pr25416-5d.s: Likewise. * testsuite/ld-x86-64/pr25416-5e.s: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run PR ld/25416 tests.		2020-01-20 07:01:07 -08:00
..
32bit.s
64bit.s
abs-k1om.d
abs-l1om.d
abs.d
align-branch-1.d	Fix ld-x86-64/align-branch-1 test failure on --target=x86_64-elf	2020-01-18 14:42:24 -08:00
align-branch-1.s	i386: Add tests for -malign-branch-boundary and -malign-branch	2019-12-12 12:03:45 -08:00
apic.d
apic.s
bnd-branch-1-now.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-branch-1.d
bnd-branch-1.s
bnd-ifunc-1-now.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-ifunc-1.d
bnd-ifunc-1.s
bnd-ifunc-2-now.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-ifunc-2.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-ifunc-2.s
bnd-plt-1-now.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-plt-1.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
call1.s
call1a.d
call1b.d
call1c.d
call1d.d
call1e.d
call1f.d
call1g.d
call1h.d
call1i.d
compressed1.d
compressed1.s
copyreloc-lib.c
copyreloc-main1.rd
copyreloc-main2.rd
copyreloc-main.out
copyreloc-main.S
discarded1.d
discarded1.s
discarded1.t
dummy.s
dwarfreloc1.s
dwarfreloc2.s
dwarfreloc.exp	Update year range in copyright notice of binutils files	2020-01-01 18:42:54 +10:30
dwarfreloc.rd
export-class.exp	Update year range in copyright notice of binutils files	2020-01-01 18:42:54 +10:30
foo.s
gotpcrel1.dd
gotpcrel1.out
gotpcrel1a.S
gotpcrel1b.c
gotpcrel1c.c
gotpcrel1d.S
gotplt1.d
gotplt1.s
hidden1.d
hidden1.s
hidden2.d
hidden2.s
hidden3.d
hidden3.s
hidden4.d
hidden4.s
hidden5.d
hidden5.s
ia32-1.d
ia32-2.d
ia32-3.d
ibt-plt-1-x32.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-1.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-1.s
ibt-plt-2.s
ibt-plt-2a-x32.d	x86: Remove empty X86_FEATURE_1_AND property	2018-08-17 03:54:16 -07:00
ibt-plt-2a.d	x86: Remove empty X86_FEATURE_1_AND property	2018-08-17 03:54:16 -07:00
ibt-plt-2b-x32.d	x86: Remove empty X86_FEATURE_1_AND property	2018-08-17 03:54:16 -07:00
ibt-plt-2b.d	x86: Remove empty X86_FEATURE_1_AND property	2018-08-17 03:54:16 -07:00
ibt-plt-2c-x32.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-2c.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-2d-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
ibt-plt-2d.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
ibt-plt-3.s
ibt-plt-3a-x32.d
ibt-plt-3a.d
ibt-plt-3b-x32.d
ibt-plt-3b.d
ibt-plt-3c-x32.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-3c.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-3d-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
ibt-plt-3d.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
ilp32-1.d
ilp32-2.d
ilp32-3.d
ilp32-4-nacl.d
ilp32-4.d
ilp32-4.s
ilp32-5.d
ilp32-5.s
ilp32-6.d
ilp32-6.s
ilp32-7.d
ilp32-7.s
ilp32-8.d
ilp32-8.s
ilp32-9.d
ilp32-9.s
ilp32-10.d
ilp32-10.s
ilp32-11.d
ilp32-11.s
incompatible.l
largecomm-1.s
largecomm-1a.d
largecomm-1b.d
largecomm-1c.d
largecomm-1d.d
largecomm-1e.d
largecomm-1f.d
lea1.s
lea1a.d
lea1b.d
lea1c.d
lea1d.d
lea1e.d
lea1f.d
lea1g.d
lea1h.d
lea1i.d
lea1j.d
lea1k.d
lea1l.d
libno-plt-1b.dd
libno-plt-1b.rd
line.exp	Update year range in copyright notice of binutils files	2020-01-01 18:42:54 +10:30
load1.s
load1a-nacl.d
load1a.d
load1b-nacl.d
load1b.d
load1c-nacl.d
load1c.d
load1d-nacl.d
load1d.d
load2.d	Prefer object over notype symbols when disassembling	2019-12-17 20:43:00 +10:30
load2.map
load2.s
lp64-1.d
lp64-2.d
lp64-3.d
mixed1a.s
mixed1b.s
mixed2a.s
mixed2b.s
mov1.s
mov1a.d
mov1b.d
mov1c.d
mov1d.d
mov2.s
mov2a.d
mov2b.d
mov2c.d
mov2d.d
mpx1.out
mpx1a.c
mpx1a.rd
mpx1b.c
mpx1c.c
mpx1c.rd
mpx2.out
mpx2a.c
mpx2a.rd
mpx2b.c
mpx2c.c
mpx2c.rd
mpx3.dd
mpx3a.s
mpx3b.s
mpx3n.dd
mpx4.dd
mpx4a.s
mpx4b.s
mpx4n.dd
mpx.exp	Update year range in copyright notice of binutils files	2020-01-01 18:42:54 +10:30
no-plt-1a.dd
no-plt-1a.rd
no-plt-1b.dd
no-plt-1b.rd
no-plt-1c.dd
no-plt-1c.rd
no-plt-1d.dd
no-plt-1d.rd
no-plt-1e.dd
no-plt-1e.nd
no-plt-1e.rd
no-plt-1f.dd
no-plt-1f.rd
no-plt-1g.dd
no-plt-1g.rd
no-plt-check1.S
no-plt-extern1.S
no-plt-func1.c
no-plt-main1.c
no-plt.exp	Update year range in copyright notice of binutils files	2020-01-01 18:42:54 +10:30
nogot1.d
nogot1.s
nogot2.d
nogot2.s
pass.c
pass.out
pcrel8.d
pcrel16.d
pic1.d
pic1.s
pie1.d
pie1.s
pie2.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pie2.s
pie3-nacl.d
pie3.d
pie3.s
plt2.dd
plt2.rd
plt2.s
plt-lib.c
plt-main1.c
plt-main1.rd
plt-main2.c
plt-main2.rd
plt-main3.c
plt-main3.rd
plt-main4.c
plt-main4.rd
plt-main5.c
plt-main-bnd-now.rd
plt-main-bnd.dd
plt-main-ibt-now.rd
plt-main-ibt-x32.dd
plt-main-ibt.dd
plt-main.out
plt-main.rd
plt-nacl.pd
plt-pic.s
plt.pd
plt.s
pltgot-1.d
pltgot-1.s
pltgot-2.d
pltlib.s
pr12570a.d
pr12570a.s
pr12570b.d
pr12570b.s
pr12718.d
pr12718.s
pr12921.d
pr12921.s
pr13082-1.s
pr13082-1a.d
pr13082-1b.d
pr13082-2.s
pr13082-2a.d
pr13082-2b.d
pr13082-3.s
pr13082-3a.d
pr13082-3b.d
pr13082-3c.d
pr13082-3d.d
pr13082-4.s
pr13082-4a.d
pr13082-4b.d
pr13082-5.s
pr13082-5a.d
pr13082-5b.d
pr13082-6.s
pr13082-6a.d
pr13082-6b.d
pr13947.d
pr13947.s
pr14207.d
pr14207.s
pr14215.d
pr14215.s
pr17306a.s
pr17306b.s
pr17618.d
pr17618.s
pr17689.out
pr17689.rd
pr17689a.c
pr17689b.S
pr17689now.rd
pr17709-nacl.rd
pr17709.rd
pr17709a.s
pr17709b.s
pr17827.rd
pr17935-1.d
pr17935-1.s
pr17935-2.d
pr17935-2.s
pr18160.d
pr18160.s
pr18160.t
pr18176.d
pr18176.s
pr18176.t
pr18591.d
pr18591.s
pr18801.s
pr18801a.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr18801b.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr18815.d
pr18815.s
pr18900.out
pr18900a.c
pr18900a.rd
pr18900b.c
pr18900b.rd
pr18900c.c
pr19013-nacl.d
pr19013-x32.d
pr19013.d
pr19013.s
pr19031.out
pr19031a.c
pr19031b.S
pr19031c.c
pr19162.d
pr19162a.s
pr19162b.s
pr19175.d
pr19175.s
pr19175.t
pr19319.dd
pr19319a.S
pr19319b.S
pr19539.s
pr19539.t
pr19539a.d
pr19539b.d
pr19609-1.s
pr19609-1a.d
pr19609-1b.d
pr19609-1c.d
pr19609-1d.d
pr19609-1e.d
pr19609-1f.d
pr19609-1g.d
pr19609-1h.d
pr19609-1i.d
pr19609-1j.d
pr19609-1k.d
pr19609-1l.d
pr19609-1m.d
pr19609-2.s
pr19609-2a.d
pr19609-2b.d
pr19609-2c.d
pr19609-2d.d
pr19609-3.s
pr19609-3a.d
pr19609-3b.d
pr19609-4.s
pr19609-4a.d
pr19609-4b.d
pr19609-4c.d
pr19609-4d.d
pr19609-4e.d
pr19609-5.s
pr19609-5a.d
pr19609-5b.d
pr19609-5c.d
pr19609-5d.d
pr19609-5e.d
pr19609-6.s
pr19609-6a.d
pr19609-6b.d
pr19609-6c.d
pr19609-6d.d
pr19609-7.s
pr19609-7a.d
pr19609-7b.d
pr19609-7c.d
pr19609-7d.d
pr19615.d
pr19615.s
pr19636-1.s
pr19636-1a.d
pr19636-1b.d
pr19636-1c.d
pr19636-1d.d
pr19636-1e.d
pr19636-1f.d
pr19636-1g.d
pr19636-1h.d
pr19636-1i.d
pr19636-1j.d
pr19636-2.s
pr19636-2a.d
pr19636-2b.d
pr19636-2c.d
pr19636-2d-nacl.d
pr19636-2d.d
pr19636-2e.d
pr19636-2f.d
pr19636-2g.d
pr19636-2h.d
pr19636-2i.d
pr19636-2j.d
pr19636-2k.d
pr19636-2l.d
pr19636-2m.d
pr19636-3.s
pr19636-3a.d
pr19636-3b.d
pr19636-3c.d
pr19636-3d.d
pr19645.d
pr19645.s
pr19704.out
pr19704a.c
pr19704b.c
pr19719.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr19719.s
pr19784a.c
pr19784b.c
pr19784c.c
pr19807-1.s
pr19807-1a.d
pr19807-1b.d
pr19807-2.s
pr19807-2a.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr19807-2b.d
pr19807-2c.d
pr19807-2d.d
pr19807-2e.d
pr19827-nacl.rd
pr19827.rd
pr19827a.S
pr19827b.S
pr19939.s
pr19939a.d
pr19939b.d
pr19969.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr19969a.S
pr19969b.S
pr20093-1.d
pr20093-1.s
pr20093-2.d
pr20093-2.s
pr20253-1.s
pr20253-1a.d
pr20253-1b.d
pr20253-1c.d
pr20253-1d.d
pr20253-1e.d
pr20253-1f.d
pr20253-1g.d
pr20253-1h.d
pr20253-1i.d
pr20253-1j.d
pr20253-1k.d
pr20253-1l.d
pr20253-2a.c
pr20253-2b.S
pr20253-2c.S
pr20253-2d.S
pr20253-3.d
pr20253-3.s
pr20253-4.s
pr20253-4a.d
pr20253-4b.d
pr20253-4c.d
pr20253-4d.d
pr20253-4e.d
pr20253-4f.d
pr20253-5.s
pr20253-5a.d
pr20253-5b.d
pr20550a.s
pr20550b.s
pr20800a.S
pr20800b.S
pr20830.s
pr20830a-now.d
pr20830a.d
pr20830b-now.d
pr20830b.d
pr21038a-now.d
pr21038a.d
pr21038a.s
pr21038b-now.d
pr21038b.d
pr21038b.s
pr21038c-now.d
pr21038c.d
pr21038c.s
pr21481a.c
pr21481b.S
pr21884-nacl.d
pr21884-nacl.t
pr21884.d
pr21884.t
pr21997-1a.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr21997-1a.S
pr21997-1b.c
pr21997-1b.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr21997-1c.c
pr22001-1a.c
pr22001-1a.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr22001-1b.c
pr22001-1b.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr22001-1c.c
pr22048.d
pr22048a.s
pr22048b.s
pr22064a.S
pr22064b.c
pr22071.d
pr22071.s
pr22115-1.s
pr22115-1a-x32.d
pr22115-1a.d
pr22115-1b-x32.d
pr22115-1b.d
pr22115-1c-x32.d
pr22115-1c.d
pr22115-1d-x32.d
pr22115-1d.d
pr22135.d
pr22135.s
pr22393-3a.c
pr22393-3a.rd
pr22393-3b.c
pr22393-3b.rd
pr22782.s
pr22782a.d
pr22782b.d
pr22791-1.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr22791-1a.c
pr22791-1b.s
pr22791-2.rd
pr22791-2a.s
pr22791-2b.c
pr22791-2c.s
pr22842a.c
pr22842a.rd
pr22842b.rd
pr22842b.S
pr22929.d
pr22929.s
pr23189.d
pr23189.s
pr23189.t
pr23194.d
pr23194.map
pr23194.s
pr23324.s
pr23324a.d
pr23324b.d
pr23372a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23372a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23372a.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372b-x32.d
pr23372b.d
pr23372b.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372c-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23372c.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23372c.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372d-x32.d	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372d.d	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372d.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372e.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372f.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23486a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486a.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23486b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486b.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23486c-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486c.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486c.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23486d-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486d.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486d.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23854.d	x86: Disable GOT relaxation with data prefix	2018-11-05 09:01:43 -08:00
pr23854.s	x86: Disable GOT relaxation with data prefix	2018-11-05 09:01:43 -08:00
pr23930-32.t	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930-x32.d	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930.d	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930.t	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930a.s	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930b.s	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23997a.s	x86: Properly handle PLT expression in directive	2018-12-19 12:22:12 -08:00
pr23997b.c	x86: Properly handle PLT expression in directive	2018-12-19 12:22:12 -08:00
pr23997c.c	x86: Properly handle PLT expression in directive	2018-12-19 12:22:12 -08:00
pr24151a-x32.d	x86-64: Restore PIC check for PCREL reloc against protected symbol	2019-02-05 18:45:34 -08:00
pr24151a.d	x86-64: Restore PIC check for PCREL reloc against protected symbol	2019-02-05 18:45:34 -08:00
pr24151a.s	x86-64: Restore PIC check for PCREL reloc against protected symbol	2019-02-05 18:45:34 -08:00
pr24276.dso	x86-64: Skip protected check on symbol defined by linker	2019-02-27 11:53:27 -08:00
pr24276.warn	x86-64: Skip protected check on symbol defined by linker	2019-02-27 11:53:27 -08:00
pr24322a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24322a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24322a.s	x86: Properly set IBT and SHSTK properties for -z ibt/shstk	2019-03-13 14:38:29 +08:00
pr24322b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24322b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24322b.s	x86: Properly set IBT and SHSTK properties for -z ibt/shstk	2019-03-13 14:38:29 +08:00
pr24322c.s	x86: Properly set IBT and SHSTK properties for -z ibt/shstk	2019-03-13 14:38:29 +08:00
pr24458.s	x86: Also check x86 linker_def for non-shared definition	2019-04-17 09:08:46 -07:00
pr24458a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458c-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458c.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24721-x32.d	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24721.d	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24721.map	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24721a.s	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24721b.s	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24905-x32.d	x86-64: Move PIC check for PC-relative relocations back	2019-08-16 14:25:58 -07:00
pr24905.d	x86-64: Move PIC check for PC-relative relocations back	2019-08-16 14:25:58 -07:00
pr24905.s	x86-64: Move PIC check for PC-relative relocations back	2019-08-16 14:25:58 -07:00
pr24905.t	x86-64: Move PIC check for PC-relative relocations back	2019-08-16 14:25:58 -07:00
pr25416-1.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-1a.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-1b.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-2.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-2a.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-2b.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-3.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-3.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-4.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-4.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5a.c	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5b.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5c.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5d.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5e.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
property-1.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-1a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-2.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-2a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-3.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-3a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-4.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-4a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-5.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-5a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-6.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-6a.c
property-6b.c
property-6c.S
property-7.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-7a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-no-copy.S
property-stack.S
property-unsorted-1.S
property-unsorted-2.S
property-x86-1.S	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
property-x86-2.S	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
property-x86-3-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-3.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-3.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
property-x86-4a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-4a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-4a.s
property-x86-4b-x32.d
property-x86-4b.d
property-x86-4b.s
property-x86-5-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-5.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-5a.s	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
property-x86-5b.s	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
property-x86-cet1-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet1.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet2a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet2a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet2b-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet2b.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet3a-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet3a.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet3b-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet3b.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet4a-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet4a.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet4b-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet4b.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet5a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet5a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet5b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet5b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet6-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet6.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet.s	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-empty.s
property-x86-ibt1a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt1a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt1a.map	elf: Report property change when merging properties	2018-12-07 08:30:43 -08:00
property-x86-ibt1b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt1b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt2-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt2.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt3a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt3a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt3b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt3b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt4-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt4.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt5-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt5.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt.s
property-x86-shstk1a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk1a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk1b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk1b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk2-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk2.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk3a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk3a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk3b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk3b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk4-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk4.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk5-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk5.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk.s
protected1.d
protected1.s
protected2-k1om.d
protected2-l1om.d
protected2.d
protected2.s
protected3-k1om.d
protected3-l1om.d
protected3.d
protected3.s
protected4.d
protected4.s
protected5.d
protected5.s
protected6.s
protected6a.d
protected6b.d
protected7.s
protected7a.d
protected7b.d
protected8.d
protected8.s
simple.c
split-by-file1.s
split-by-file2.s
split-by-file-nacl.rd
split-by-file.rd
start.s
tls-def1.c
tls-gd1.S
tls-ld1.S
tls-main1.c
tls.exp	Update year range in copyright notice of binutils files	2020-01-01 18:42:54 +10:30
tlsbin2-nacl.rd
tlsbin2.dd
tlsbin2.rd
tlsbin2.sd
tlsbin2.td
tlsbin-nacl.rd
tlsbin.dd
tlsbin.rd
tlsbin.s
tlsbin.sd
tlsbin.td
tlsbindesc-nacl.rd
tlsbindesc.dd
tlsbindesc.rd
tlsbindesc.s
tlsbindesc.sd
tlsbindesc.td
tlsbinpic2.s
tlsbinpic.s
tlsdesc1a.c
tlsdesc1b.c
tlsdesc2.d
tlsdesc-nacl.pd
tlsdesc-nacl.rd
tlsdesc.dd
tlsdesc.pd
tlsdesc.rd
tlsdesc.s
tlsdesc.sd
tlsdesc.td
tlsg.s
tlsg.sd
tlsgd1.dd
tlsgd1.s
tlsgd2.d
tlsgd2.s
tlsgd3.d
tlsgd3.s
tlsgd4.dd
tlsgd4.s
tlsgd5.dd
tlsgd5a.s
tlsgd5b.s
tlsgd5c.s
tlsgd6.dd
tlsgd6a.s
tlsgd6b.s
tlsgd6c.s
tlsgd7.dd
tlsgd7.s
tlsgd8.dd
tlsgd8.s
tlsgd9.dd
tlsgd9.s
tlsgd10.dd
tlsgd10.s
tlsgd11.dd
tlsgd11.s
tlsgd12.d
tlsgd12.s
tlsgd13.d
tlsgd13.s
tlsgd14.dd
tlsgd14.s
tlsgdesc-nacl.rd
tlsgdesc.dd
tlsgdesc.rd
tlsgdesc.s
tlsie1.dd
tlsie1.s
tlsie2.d
tlsie2.s
tlsie3.d
tlsie3.s
tlsie4.dd
tlsie4.s
tlsld1.dd
tlsld1.s
tlsld2.dd
tlsld2.s
tlsld3.dd
tlsld3.s
tlsld4.dd
tlsld4.s
tlsld5.dd
tlsld5.s
tlsld6.dd
tlsld6.s
tlsle1.d
tlsle1.s
tlslib.s
tlspic1.s
tlspic2-nacl.rd
tlspic2.dd
tlspic2.rd
tlspic2.s
tlspic2.sd
tlspic2.td
tlspic3.s
tlspic-nacl.rd
tlspic.dd
tlspic.rd
tlspic.sd
tlspic.td
tlspie1.d	Ensure that binutils test names are unique.	2018-09-17 10:10:47 +01:00
tlspie1.s
tlspie2.s
tlspie2a.d
tlspie2b.d
tlspie2c.d
undefined.s
unique1.d
unique1.s
x86-64-64-export-class.rd
x86-64-x32-export-class.rd
x86-64-x32.rd
x86-64.exp	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00