mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-27 04:52:05 +08:00
44122162ae
This is the previously mentioned patch to get rid of unstructured/ioctl-based procfs support in procfs.c. Given that support for structured procfs was introduced in Solaris 2.6 back in 1997 and we're just removing support for Solaris < 10, there's no point in carrying that baggage (and tons of support for IRIX and OSF/1 as well) around any longer. Most of the patch should be straightforward (removing support for !NEW_PROC_API, non-Solaris OSes and pre-Solaris 10 quirks). Only a few points need explanations: * <sys/syscall.h> was already included unconditionally in most places, so there's no need to have guards in a few remaining ones. * configure.host already obsoletes i?86-*-sysv4.2, i?86-*-sysv5, so NEW_PROC_API detection for those in configure.ac can go. * I'm still including <sys/procfs.h> with #define _STRUCTURED_PROC 1. Theoretically, it would be better to include <procfs.h> on Solaris (which includes that define), but that breaks the build over <procfs.h> vs. gdb's "procfs.h", and doesn't exist on Linux. * I've regenerated syscall_table[] in proc-events.c with a small script from Solaris 10, 11.3, 11.4 <sys/syscall.h>, so there should be no traces of older Solaris versions and other OSes left. * prsysent_t and DYNAMIC_SYSCALLS was only used for AIX 5, but AIX doesn't use procfs.c any longer, so all related code can go. The patch was generated with diff -w so one can easier see changes without being distracted by simple reindentations. So far, it has only been compiled and smoke-tested on amd64-pc-solaris2.1[01], sparcv9-sun-solaris2.1[01], and x86_64-pc-linux-gnu. Certainly needs more testing (Solaris 11.3 vs. 11.4, 32-bit gdb, testsuite once I've figured out what's wrong on Solaris 10 etc.), but it's enough to get a first impression how much cleanup is possible here. * configure.ac Don't check for sys/fault.h, sys/syscall.h, sys/proc.h. (NEW_PROC_API): Remove. (prsysent_t, pr_sigset_t, pr_sigaction64_t, pr_siginfo64_t): Likewise. * common/common.m4 (GDB_AC_COMMON): Don't check for sys/syscall.h. * configure: Regenerate. * config.in: Regenerate. * gdbserver/configure: Regenerate. * gdbserver/config.in: Regenerate. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Remove NEW_PROC_API test. * sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Likewise. * linux-btrace.c: Remove HAVE_SYS_SYSCALL_H test. * proc-api.c: Remove !NEW_PROC_API support. Remove HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests. Remove tests for macros always defined on Solaris. * proc-events.c: Remove !NEW_PROC_API support. Remove Remove HAVE_SYS_SYSCALL_H, HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests. (init_syscall_table): Remove non-Solaris syscalls. Remove tests for syscalls present on all Solaris versions. Add missing Solaris 10+ syscalls. (signal_table): Remove non-Solaris signals. Remove tests for signals present on all Solaris versions. (fault_table): Remove non-Solaris faults. Remove tests for faults present on all Solaris versions. * proc-flags.c: Remove !NEW_PROC_API support. (pr_flag_table): Remove non-Solaris and pre-Solaris 7 comments. Remove non-Solaris flags. * proc-why.c: Remove !NEW_PROC_API support. (pr_why_table): Remove meaningless comments. Remove tests for reasons present on all Solaris versions. Remove OSF/1 cases. (proc_prettyfprint_why): Likewise. * procfs.c: Remove !NEW_PROC_API and DYNAMIC_SYSCALLS support. Remove HAVE_SYS_FAULT_H and HAVE_SYS_SYSCALL_H tests. Remove WA_READ test, IRIX watchpoint support. (gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t): Replace by base types. Change users. (gdb_praddset, gdb_prdelset, gdb_premptysysset, gdb_praddsysset) (gdb_prdelset, gdb_pr_issyssetmember): Replace by base macros. Change callers. Remove CTL_PROC_NAME_FMT tests. (gdb_prstatus_t, gdb_lwpstatus_t): Replace by base types. Change users. (sysset_t_size): Remove. Use sizeof (sysset_t) in callers. Remove PROCFS_DONT_PIOCSSIG_CURSIG support. (proc_modify_flag): Replace GDBRESET by PCUNSET. Remove PR_ASYNC, PR_KLC tests. (proc_unset_inherit_on_fork): Remove PR_ASYNC test. (proc_parent_pid): Remove PCWATCH etc. tests. (proc_set_watchpoint): Remove !PCWATCH && !PIOCSWATCH support. Remove PCAGENT test. (proc_get_nthreads) [PIOCNTHR && PIOCTLIST]: Remove. Remove SYS_lwpcreate || SYS_lwp_create test. (proc_get_current_thread): Likewise. [PIOCNTHR && PIOCTLIST]: Remove. [PIOCLSTATUS]: Remove. (procfs_debug_inferior): Remove non-Solaris cases, conditionals. [PRFS_STOPEXEC]: Remove. (syscall_is_lwp_exit): Remove non-Solaris cases, conditionals. (syscall_is_exit): Likewise. (syscall_is_exec): Likewise. (syscall_is_lwp_create): Likewise. Remove SYS_syssgi support. (procfs_wait): Remove PR_ASYNC, !PIOCSSPCACT tests. [SYS_syssgi]: Remove. Remove non-Solaris cases, conditionals. (unconditionally_kill_inferior) [PROCFS_NEED_PIOCSSIG_FOR_KILL]: Remove. (procfs_init_inferior) [SYS_syssgi]: Remove. (procfs_set_exec_trap) [PRFS_STOPEXEC]: Remove. (procfs_inferior_created) [SYS_syssgi]: Remove. (procfs_set_watchpoint): Remove !AIX5 test. (procfs_stopped_by_watchpoint): Remove FLTWATCH test, FLTKWATCH case. (mappingflags) [MA_PHYS]: Remove. (info_mappings_callback): Remove PCAGENT test. Remove PIOCOPENLWP || PCAGENT test.
220 lines
8.3 KiB
Plaintext
220 lines
8.3 KiB
Plaintext
# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
|
|
|
|
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
|
|
# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
|
|
# Inc.
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
|
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
|
# PARTICULAR PURPOSE.
|
|
|
|
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
|
|
|
|
# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# serial 1
|
|
|
|
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
|
|
# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
|
|
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
|
|
#
|
|
# Of course, Automake must honor this variable whenever it calls a
|
|
# tool from the auxiliary directory. The problem is that $srcdir (and
|
|
# therefore $ac_aux_dir as well) can be either absolute or relative,
|
|
# depending on how configure is run. This is pretty annoying, since
|
|
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
|
|
# source directory, any form will work fine, but in subdirectories a
|
|
# relative path needs to be adjusted first.
|
|
#
|
|
# $ac_aux_dir/missing
|
|
# fails when called from a subdirectory if $ac_aux_dir is relative
|
|
# $top_srcdir/$ac_aux_dir/missing
|
|
# fails if $ac_aux_dir is absolute,
|
|
# fails when called from a subdirectory in a VPATH build with
|
|
# a relative $ac_aux_dir
|
|
#
|
|
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
|
|
# are both prefixed by $srcdir. In an in-source build this is usually
|
|
# harmless because $srcdir is `.', but things will broke when you
|
|
# start a VPATH build or use an absolute $srcdir.
|
|
#
|
|
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
|
|
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
|
|
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
|
|
# and then we would define $MISSING as
|
|
# MISSING="\${SHELL} $am_aux_dir/missing"
|
|
# This will work as long as MISSING is not called from configure, because
|
|
# unfortunately $(top_srcdir) has no meaning in configure.
|
|
# However there are other variables, like CC, which are often used in
|
|
# configure, and could therefore not use this "fixed" $ac_aux_dir.
|
|
#
|
|
# Another solution, used here, is to always expand $ac_aux_dir to an
|
|
# absolute PATH. The drawback is that using absolute paths prevent a
|
|
# configured tree to be moved without reconfiguration.
|
|
|
|
AC_DEFUN([AM_AUX_DIR_EXPAND],
|
|
[dnl Rely on autoconf to set up CDPATH properly.
|
|
AC_PREREQ([2.50])dnl
|
|
# expand $ac_aux_dir to an absolute path
|
|
am_aux_dir=`cd $ac_aux_dir && pwd`
|
|
])
|
|
|
|
# AM_CONDITIONAL -*- Autoconf -*-
|
|
|
|
# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
|
|
# Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# serial 9
|
|
|
|
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
|
|
# -------------------------------------
|
|
# Define a conditional.
|
|
AC_DEFUN([AM_CONDITIONAL],
|
|
[AC_PREREQ(2.52)dnl
|
|
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
|
|
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
|
|
AC_SUBST([$1_TRUE])dnl
|
|
AC_SUBST([$1_FALSE])dnl
|
|
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
|
|
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
|
|
m4_define([_AM_COND_VALUE_$1], [$2])dnl
|
|
if $2; then
|
|
$1_TRUE=
|
|
$1_FALSE='#'
|
|
else
|
|
$1_TRUE='#'
|
|
$1_FALSE=
|
|
fi
|
|
AC_CONFIG_COMMANDS_PRE(
|
|
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
|
|
AC_MSG_ERROR([[conditional "$1" was never defined.
|
|
Usually this means the macro was only invoked conditionally.]])
|
|
fi])])
|
|
|
|
# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
|
|
# Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# serial 1
|
|
|
|
# AM_PROG_INSTALL_SH
|
|
# ------------------
|
|
# Define $install_sh.
|
|
AC_DEFUN([AM_PROG_INSTALL_SH],
|
|
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
|
|
if test x"${install_sh}" != xset; then
|
|
case $am_aux_dir in
|
|
*\ * | *\ *)
|
|
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
|
|
*)
|
|
install_sh="\${SHELL} $am_aux_dir/install-sh"
|
|
esac
|
|
fi
|
|
AC_SUBST(install_sh)])
|
|
|
|
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
|
|
# From Jim Meyering
|
|
|
|
# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008,
|
|
# 2011 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# serial 5
|
|
|
|
# AM_MAINTAINER_MODE([DEFAULT-MODE])
|
|
# ----------------------------------
|
|
# Control maintainer-specific portions of Makefiles.
|
|
# Default is to disable them, unless `enable' is passed literally.
|
|
# For symmetry, `disable' may be passed as well. Anyway, the user
|
|
# can override the default with the --enable/--disable switch.
|
|
AC_DEFUN([AM_MAINTAINER_MODE],
|
|
[m4_case(m4_default([$1], [disable]),
|
|
[enable], [m4_define([am_maintainer_other], [disable])],
|
|
[disable], [m4_define([am_maintainer_other], [enable])],
|
|
[m4_define([am_maintainer_other], [enable])
|
|
m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
|
|
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
|
|
dnl maintainer-mode's default is 'disable' unless 'enable' is passed
|
|
AC_ARG_ENABLE([maintainer-mode],
|
|
[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
|
|
(and sometimes confusing) to the casual installer],
|
|
[USE_MAINTAINER_MODE=$enableval],
|
|
[USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
|
|
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
|
|
AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
|
|
MAINT=$MAINTAINER_MODE_TRUE
|
|
AC_SUBST([MAINT])dnl
|
|
]
|
|
)
|
|
|
|
AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
|
|
|
|
# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# serial 1
|
|
|
|
# AM_PROG_INSTALL_STRIP
|
|
# ---------------------
|
|
# One issue with vendor `install' (even GNU) is that you can't
|
|
# specify the program used to strip binaries. This is especially
|
|
# annoying in cross-compiling environments, where the build's strip
|
|
# is unlikely to handle the host's binaries.
|
|
# Fortunately install-sh will honor a STRIPPROG variable, so we
|
|
# always use install-sh in `make install-strip', and initialize
|
|
# STRIPPROG with the value of the STRIP variable (set by the user).
|
|
AC_DEFUN([AM_PROG_INSTALL_STRIP],
|
|
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
|
|
# Installed binaries are usually stripped using `strip' when the user
|
|
# run `make install-strip'. However `strip' might not be the right
|
|
# tool to use in cross-compilation environments, therefore Automake
|
|
# will honor the `STRIP' environment variable to overrule this program.
|
|
dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
|
|
if test "$cross_compiling" != no; then
|
|
AC_CHECK_TOOL([STRIP], [strip], :)
|
|
fi
|
|
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
|
|
AC_SUBST([INSTALL_STRIP_PROGRAM])])
|
|
|
|
# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# serial 3
|
|
|
|
# _AM_SUBST_NOTMAKE(VARIABLE)
|
|
# ---------------------------
|
|
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
|
|
# This macro is traced by Automake.
|
|
AC_DEFUN([_AM_SUBST_NOTMAKE])
|
|
|
|
# AM_SUBST_NOTMAKE(VARIABLE)
|
|
# --------------------------
|
|
# Public sister of _AM_SUBST_NOTMAKE.
|
|
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
|
|
|
|
m4_include([acinclude.m4])
|