mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
73cc72729a
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild.
280 lines
11 KiB
C++
280 lines
11 KiB
C++
/* Compile-time assert-like macros.
|
|
|
|
Copyright (C) 2005-2006, 2009-2016 Free Software Foundation, Inc.
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
/* Written by Paul Eggert, Bruno Haible, and Jim Meyering. */
|
|
|
|
#ifndef _GL_VERIFY_H
|
|
#define _GL_VERIFY_H
|
|
|
|
|
|
/* Define _GL_HAVE__STATIC_ASSERT to 1 if _Static_assert works as per C11.
|
|
This is supported by GCC 4.6.0 and later, in C mode, and its use
|
|
here generates easier-to-read diagnostics when verify (R) fails.
|
|
|
|
Define _GL_HAVE_STATIC_ASSERT to 1 if static_assert works as per C++11.
|
|
This will likely be supported by future GCC versions, in C++ mode.
|
|
|
|
Use this only with GCC. If we were willing to slow 'configure'
|
|
down we could also use it with other compilers, but since this
|
|
affects only the quality of diagnostics, why bother? */
|
|
#if (4 < __GNUC__ + (6 <= __GNUC_MINOR__) \
|
|
&& (201112L <= __STDC_VERSION__ || !defined __STRICT_ANSI__) \
|
|
&& !defined __cplusplus)
|
|
# define _GL_HAVE__STATIC_ASSERT 1
|
|
#endif
|
|
/* The condition (99 < __GNUC__) is temporary, until we know about the
|
|
first G++ release that supports static_assert. */
|
|
#if (99 < __GNUC__) && defined __cplusplus
|
|
# define _GL_HAVE_STATIC_ASSERT 1
|
|
#endif
|
|
|
|
/* FreeBSD 9.1 <sys/cdefs.h>, included by <stddef.h> and lots of other
|
|
system headers, defines a conflicting _Static_assert that is no
|
|
better than ours; override it. */
|
|
#ifndef _GL_HAVE_STATIC_ASSERT
|
|
# include <stddef.h>
|
|
# undef _Static_assert
|
|
#endif
|
|
|
|
/* Each of these macros verifies that its argument R is nonzero. To
|
|
be portable, R should be an integer constant expression. Unlike
|
|
assert (R), there is no run-time overhead.
|
|
|
|
If _Static_assert works, verify (R) uses it directly. Similarly,
|
|
_GL_VERIFY_TRUE works by packaging a _Static_assert inside a struct
|
|
that is an operand of sizeof.
|
|
|
|
The code below uses several ideas for C++ compilers, and for C
|
|
compilers that do not support _Static_assert:
|
|
|
|
* The first step is ((R) ? 1 : -1). Given an expression R, of
|
|
integral or boolean or floating-point type, this yields an
|
|
expression of integral type, whose value is later verified to be
|
|
constant and nonnegative.
|
|
|
|
* Next this expression W is wrapped in a type
|
|
struct _gl_verify_type {
|
|
unsigned int _gl_verify_error_if_negative: W;
|
|
}.
|
|
If W is negative, this yields a compile-time error. No compiler can
|
|
deal with a bit-field of negative size.
|
|
|
|
One might think that an array size check would have the same
|
|
effect, that is, that the type struct { unsigned int dummy[W]; }
|
|
would work as well. However, inside a function, some compilers
|
|
(such as C++ compilers and GNU C) allow local parameters and
|
|
variables inside array size expressions. With these compilers,
|
|
an array size check would not properly diagnose this misuse of
|
|
the verify macro:
|
|
|
|
void function (int n) { verify (n < 0); }
|
|
|
|
* For the verify macro, the struct _gl_verify_type will need to
|
|
somehow be embedded into a declaration. To be portable, this
|
|
declaration must declare an object, a constant, a function, or a
|
|
typedef name. If the declared entity uses the type directly,
|
|
such as in
|
|
|
|
struct dummy {...};
|
|
typedef struct {...} dummy;
|
|
extern struct {...} *dummy;
|
|
extern void dummy (struct {...} *);
|
|
extern struct {...} *dummy (void);
|
|
|
|
two uses of the verify macro would yield colliding declarations
|
|
if the entity names are not disambiguated. A workaround is to
|
|
attach the current line number to the entity name:
|
|
|
|
#define _GL_CONCAT0(x, y) x##y
|
|
#define _GL_CONCAT(x, y) _GL_CONCAT0 (x, y)
|
|
extern struct {...} * _GL_CONCAT (dummy, __LINE__);
|
|
|
|
But this has the problem that two invocations of verify from
|
|
within the same macro would collide, since the __LINE__ value
|
|
would be the same for both invocations. (The GCC __COUNTER__
|
|
macro solves this problem, but is not portable.)
|
|
|
|
A solution is to use the sizeof operator. It yields a number,
|
|
getting rid of the identity of the type. Declarations like
|
|
|
|
extern int dummy [sizeof (struct {...})];
|
|
extern void dummy (int [sizeof (struct {...})]);
|
|
extern int (*dummy (void)) [sizeof (struct {...})];
|
|
|
|
can be repeated.
|
|
|
|
* Should the implementation use a named struct or an unnamed struct?
|
|
Which of the following alternatives can be used?
|
|
|
|
extern int dummy [sizeof (struct {...})];
|
|
extern int dummy [sizeof (struct _gl_verify_type {...})];
|
|
extern void dummy (int [sizeof (struct {...})]);
|
|
extern void dummy (int [sizeof (struct _gl_verify_type {...})]);
|
|
extern int (*dummy (void)) [sizeof (struct {...})];
|
|
extern int (*dummy (void)) [sizeof (struct _gl_verify_type {...})];
|
|
|
|
In the second and sixth case, the struct type is exported to the
|
|
outer scope; two such declarations therefore collide. GCC warns
|
|
about the first, third, and fourth cases. So the only remaining
|
|
possibility is the fifth case:
|
|
|
|
extern int (*dummy (void)) [sizeof (struct {...})];
|
|
|
|
* GCC warns about duplicate declarations of the dummy function if
|
|
-Wredundant-decls is used. GCC 4.3 and later have a builtin
|
|
__COUNTER__ macro that can let us generate unique identifiers for
|
|
each dummy function, to suppress this warning.
|
|
|
|
* This implementation exploits the fact that older versions of GCC,
|
|
which do not support _Static_assert, also do not warn about the
|
|
last declaration mentioned above.
|
|
|
|
* GCC warns if -Wnested-externs is enabled and verify() is used
|
|
within a function body; but inside a function, you can always
|
|
arrange to use verify_expr() instead.
|
|
|
|
* In C++, any struct definition inside sizeof is invalid.
|
|
Use a template type to work around the problem. */
|
|
|
|
/* Concatenate two preprocessor tokens. */
|
|
#define _GL_CONCAT(x, y) _GL_CONCAT0 (x, y)
|
|
#define _GL_CONCAT0(x, y) x##y
|
|
|
|
/* _GL_COUNTER is an integer, preferably one that changes each time we
|
|
use it. Use __COUNTER__ if it works, falling back on __LINE__
|
|
otherwise. __LINE__ isn't perfect, but it's better than a
|
|
constant. */
|
|
#if defined __COUNTER__ && __COUNTER__ != __COUNTER__
|
|
# define _GL_COUNTER __COUNTER__
|
|
#else
|
|
# define _GL_COUNTER __LINE__
|
|
#endif
|
|
|
|
/* Generate a symbol with the given prefix, making it unique if
|
|
possible. */
|
|
#define _GL_GENSYM(prefix) _GL_CONCAT (prefix, _GL_COUNTER)
|
|
|
|
/* Verify requirement R at compile-time, as an integer constant expression
|
|
that returns 1. If R is false, fail at compile-time, preferably
|
|
with a diagnostic that includes the string-literal DIAGNOSTIC. */
|
|
|
|
#define _GL_VERIFY_TRUE(R, DIAGNOSTIC) \
|
|
(!!sizeof (_GL_VERIFY_TYPE (R, DIAGNOSTIC)))
|
|
|
|
#ifdef __cplusplus
|
|
# if !GNULIB_defined_struct__gl_verify_type
|
|
template <int w>
|
|
struct _gl_verify_type {
|
|
unsigned int _gl_verify_error_if_negative: w;
|
|
};
|
|
# define GNULIB_defined_struct__gl_verify_type 1
|
|
# endif
|
|
# define _GL_VERIFY_TYPE(R, DIAGNOSTIC) \
|
|
_gl_verify_type<(R) ? 1 : -1>
|
|
#elif defined _GL_HAVE__STATIC_ASSERT
|
|
# define _GL_VERIFY_TYPE(R, DIAGNOSTIC) \
|
|
struct { \
|
|
_Static_assert (R, DIAGNOSTIC); \
|
|
int _gl_dummy; \
|
|
}
|
|
#else
|
|
# define _GL_VERIFY_TYPE(R, DIAGNOSTIC) \
|
|
struct { unsigned int _gl_verify_error_if_negative: (R) ? 1 : -1; }
|
|
#endif
|
|
|
|
/* Verify requirement R at compile-time, as a declaration without a
|
|
trailing ';'. If R is false, fail at compile-time, preferably
|
|
with a diagnostic that includes the string-literal DIAGNOSTIC.
|
|
|
|
Unfortunately, unlike C11, this implementation must appear as an
|
|
ordinary declaration, and cannot appear inside struct { ... }. */
|
|
|
|
#ifdef _GL_HAVE__STATIC_ASSERT
|
|
# define _GL_VERIFY _Static_assert
|
|
#else
|
|
# define _GL_VERIFY(R, DIAGNOSTIC) \
|
|
extern int (*_GL_GENSYM (_gl_verify_function) (void)) \
|
|
[_GL_VERIFY_TRUE (R, DIAGNOSTIC)]
|
|
#endif
|
|
|
|
/* _GL_STATIC_ASSERT_H is defined if this code is copied into assert.h. */
|
|
#ifdef _GL_STATIC_ASSERT_H
|
|
# if !defined _GL_HAVE__STATIC_ASSERT && !defined _Static_assert
|
|
# define _Static_assert(R, DIAGNOSTIC) _GL_VERIFY (R, DIAGNOSTIC)
|
|
# endif
|
|
# if !defined _GL_HAVE_STATIC_ASSERT && !defined static_assert
|
|
# define static_assert _Static_assert /* C11 requires this #define. */
|
|
# endif
|
|
#endif
|
|
|
|
/* @assert.h omit start@ */
|
|
|
|
/* Each of these macros verifies that its argument R is nonzero. To
|
|
be portable, R should be an integer constant expression. Unlike
|
|
assert (R), there is no run-time overhead.
|
|
|
|
There are two macros, since no single macro can be used in all
|
|
contexts in C. verify_true (R) is for scalar contexts, including
|
|
integer constant expression contexts. verify (R) is for declaration
|
|
contexts, e.g., the top level. */
|
|
|
|
/* Verify requirement R at compile-time, as an integer constant expression.
|
|
Return 1. This is equivalent to verify_expr (R, 1).
|
|
|
|
verify_true is obsolescent; please use verify_expr instead. */
|
|
|
|
#define verify_true(R) _GL_VERIFY_TRUE (R, "verify_true (" #R ")")
|
|
|
|
/* Verify requirement R at compile-time. Return the value of the
|
|
expression E. */
|
|
|
|
#define verify_expr(R, E) \
|
|
(_GL_VERIFY_TRUE (R, "verify_expr (" #R ", " #E ")") ? (E) : (E))
|
|
|
|
/* Verify requirement R at compile-time, as a declaration without a
|
|
trailing ';'. */
|
|
|
|
#define verify(R) _GL_VERIFY (R, "verify (" #R ")")
|
|
|
|
#ifndef __has_builtin
|
|
# define __has_builtin(x) 0
|
|
#endif
|
|
|
|
/* Assume that R always holds. This lets the compiler optimize
|
|
accordingly. R should not have side-effects; it may or may not be
|
|
evaluated. Behavior is undefined if R is false. */
|
|
|
|
#if (__has_builtin (__builtin_unreachable) \
|
|
|| 4 < __GNUC__ + (5 <= __GNUC_MINOR__))
|
|
# define assume(R) ((R) ? (void) 0 : __builtin_unreachable ())
|
|
#elif 1200 <= _MSC_VER
|
|
# define assume(R) __assume (R)
|
|
#elif ((defined GCC_LINT || defined lint) \
|
|
&& (__has_builtin (__builtin_trap) \
|
|
|| 3 < __GNUC__ + (3 < __GNUC_MINOR__ + (4 <= __GNUC_PATCHLEVEL__))))
|
|
/* Doing it this way helps various packages when configured with
|
|
--enable-gcc-warnings, which compiles with -Dlint. It's nicer
|
|
when 'assume' silences warnings even with older GCCs. */
|
|
# define assume(R) ((R) ? (void) 0 : __builtin_trap ())
|
|
#else
|
|
# define assume(R) ((void) (0 && (R)))
|
|
#endif
|
|
|
|
/* @assert.h omit end@ */
|
|
|
|
#endif
|