binutils-gdb/gdb/configure.tgt
Jan Kratochvil 61a12cfa7b Remove HPUX
IIUC it is a pre-requisite for IPv6 support, some UNICes do not support
getaddrinfo required for IPv6.  But coincidentally such UNICes are no longer
really supported by GDB.  Therefore it was concluded we can remove all such
UNICes and then we can implement IPv6 easily with getaddrinfo.

In mail
        Re: getaddrinfo available on all GDB hosts? [Re: [PATCH v2] Add IPv6 support for remote TCP connections]
        Message-ID: <20140211034157.GG5485@adacore.com>
        https://sourceware.org/ml/gdb-patches/2014-02/msg00333.html
Joel said:

So I chose HP-UX first for this patch.

gdb/ChangeLog
2014-10-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Remove HPUX.
	* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
	(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
	(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
	ia64-hpux-tdep.h, solib-ia64-hpux.h.
	(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
	ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
	* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
	hppa-hpux-tdep.c.
	* config/ia64/hpux.mh: Remove file.
	* config/pa/hpux.mh: Remove file.
	* configure: Rebuilt.
	* configure.ac (dlgetmodinfo, somread.o): Remove.
	* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
	(ia64-*-hpux*): Remove its float format exception.
	* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
	* hppa-hpux-nat.c: Remove file.
	* hppa-hpux-tdep.c: Remove file.
	* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
	Move them here from hppa-tdep.h
	(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
	(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
	* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
	Move them to hppa-tdep.c.
	(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
	declarations.
	* ia64-hpux-nat.c: Remove file.
	* ia64-hpux-tdep.c: Remove file.
	* ia64-hpux-tdep.h: Remove file.
	* inf-ttrace.c: Remove file.
	* inf-ttrace.h: Remove file.
	* solib-ia64-hpux.c: Remove file.
	* solib-ia64-hpux.h: Remove file.
	* solib-pa64.c: Remove file.
	* solib-pa64.h: Remove file.
	* solib-som.c: Remove file.
	* solib-som.h: Remove file.
	* somread.c: Remove file.
2015-03-13 20:24:22 +01:00

724 lines
20 KiB
Plaintext

# Mappings from configurations to GDB target definitions. This is
# invoked from the autoconf generated configure script.
# This file sets the following shell variables:
# gdb_target_obs target-specific object files to use
# gdb_sim simulator library for target
# gdb_osabi default OS ABI to use with target
# build_gdbserver set to "yes" if gdbserver supports target
# gdb_have_gcore set to "true"/"false" if this target can run gcore
# NOTE: Every file added to a gdb_target_obs variable for any target here
# must also be added to either ALL_TARGET_OBS or ALL_64_TARGET_OBS
# in Makefile.in!
case $targ in
*-*-irix* | \
alpha*-*-osf* | \
d10v-*-* | \
hppa*-*-hiux* | \
i[34567]86-ncr-* | \
m68*-cisco*-* | \
m68*-tandem-* | \
m68*-*-os68k* | \
mips*-*-pe | \
rs6000-*-lynxos* | \
sh*-*-pe | \
hppa*-*-hpux* | \
ia64-*-hpux* | \
null)
echo "*** Configuration $targ is obsolete." >&2
echo "*** Support has been REMOVED." >&2
exit 1
;;
esac
# map target info into gdb names.
case "${targ}" in
aarch64*-*-elf)
# Target: AArch64 embedded system
gdb_target_obs="aarch64-tdep.o aarch64-newlib-tdep.o"
;;
aarch64*-*-linux*)
# Target: AArch64 linux
gdb_target_obs="aarch64-tdep.o aarch64-linux-tdep.o \
glibc-tdep.o linux-tdep.o solib-svr4.o \
symfile-mem.o"
build_gdbserver=yes
;;
alpha*-*-linux*)
# Target: Little-endian Alpha running Linux
gdb_target_obs="alpha-tdep.o alpha-mdebug-tdep.o alpha-linux-tdep.o \
linux-tdep.o solib-svr4.o"
;;
alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
# Target: FreeBSD/alpha
gdb_target_obs="alpha-tdep.o alpha-mdebug-tdep.o alphabsd-tdep.o \
alphafbsd-tdep.o solib-svr4.o"
;;
alpha*-*-netbsd* | alpha*-*-knetbsd*-gnu)
# Target: NetBSD/alpha
gdb_target_obs="alpha-tdep.o alpha-mdebug-tdep.o alphabsd-tdep.o \
alphanbsd-tdep.o nbsd-tdep.o solib-svr4.o"
;;
alpha*-*-openbsd*)
# Target: OpenBSD/alpha
gdb_target_obs="alpha-tdep.o alpha-mdebug-tdep.o alphabsd-tdep.o \
alphanbsd-tdep.o alphaobsd-tdep.o nbsd-tdep.o \
obsd-tdep.o solib-svr4.o"
;;
alpha*-*-*)
# Target: Alpha
gdb_target_obs="alpha-tdep.o"
;;
am33_2.0*-*-linux*)
# Target: Matsushita mn10300 (AM33) running Linux
gdb_target_obs="mn10300-tdep.o mn10300-linux-tdep.o linux-tdep.o \
solib-svr4.o"
;;
arm*-wince-pe | arm*-*-mingw32ce*)
# Target: ARM based machine running Windows CE (win32)
gdb_target_obs="arm-tdep.o arm-wince-tdep.o windows-tdep.o"
build_gdbserver=yes
;;
arm*-*-linux*)
# Target: ARM based machine running GNU/Linux
gdb_target_obs="arm-tdep.o arm-linux-tdep.o glibc-tdep.o \
solib-svr4.o symfile-mem.o linux-tdep.o linux-record.o"
build_gdbserver=yes
;;
arm*-*-netbsd* | arm*-*-knetbsd*-gnu)
# Target: NetBSD/arm
gdb_target_obs="arm-tdep.o armnbsd-tdep.o solib-svr4.o"
;;
arm*-*-openbsd*)
# Target: OpenBSD/arm
gdb_target_obs="arm-tdep.o armbsd-tdep.o armobsd-tdep.o obsd-tdep.o \
solib-svr4.o"
;;
arm*-*-symbianelf*)
# Target: SymbianOS/arm
gdb_target_obs="arm-tdep.o arm-symbian-tdep.o"
;;
arm*-*-*)
# Target: ARM embedded system
gdb_target_obs="arm-tdep.o"
gdb_sim=../sim/arm/libsim.a
;;
avr-*-*)
# Target: AVR
gdb_target_obs="avr-tdep.o"
gdb_sim=../sim/avr/libsim.a
;;
bfin-*-*linux*)
# Target: Blackfin Linux
gdb_target_obs="bfin-tdep.o bfin-linux-tdep.o linux-tdep.o"
gdb_sim=../sim/bfin/libsim.a
build_gdbserver=yes
;;
bfin-*-*)
# Target: Blackfin processor
gdb_target_obs="bfin-tdep.o"
gdb_sim=../sim/bfin/libsim.a
;;
cris*)
# Target: CRIS
gdb_target_obs="cris-tdep.o cris-linux-tdep.o linux-tdep.o solib-svr4.o"
;;
frv-*-*)
# Target: Fujitsu FRV processor
gdb_target_obs="frv-tdep.o frv-linux-tdep.o linux-tdep.o solib-frv.o"
gdb_sim=../sim/frv/libsim.a
;;
moxie-*-elf | moxie-*-moxiebox | moxie-*-rtems*)
gdb_target_obs="moxie-tdep.o"
gdb_sim=../sim/moxie/libsim.a
;;
h8300-*-*)
# Target: H8300 with HMS monitor and H8 simulator
gdb_target_obs="h8300-tdep.o monitor.o dsrec.o"
gdb_sim=../sim/h8300/libsim.a
;;
hppa*-*-linux*)
# Target: HP PA-RISC running Linux
gdb_target_obs="hppa-tdep.o hppa-linux-tdep.o glibc-tdep.o \
linux-tdep.o solib-svr4.o symfile-mem.o"
;;
hppa*-*-netbsd*)
# Target: NetBSD/hppa
gdb_target_obs="hppa-tdep.o hppabsd-tdep.o hppanbsd-tdep.o solib-svr4.o"
;;
hppa*-*-openbsd*)
# Target: OpenBSD/hppa
gdb_target_obs="hppa-tdep.o hppabsd-tdep.o hppaobsd-tdep.o solib-svr4.o"
;;
hppa*-*-*)
# Target: HP PA-RISC
gdb_target_obs="hppa-tdep.o"
;;
i[34567]86-*-darwin*)
# Target: Darwin/i386
gdb_target_obs="i386-tdep.o i387-tdep.o \
i386-darwin-tdep.o solib-darwin.o"
if test "x$enable_64_bit_bfd" = "xyes"; then
# Target: GNU/Linux x86-64
gdb_target_obs="amd64-tdep.o amd64-darwin-tdep.o ${gdb_target_obs}"
fi
;;
i[34567]86-*-dicos*)
# Target: DICOS/i386
gdb_target_obs="i386-tdep.o i387-tdep.o dicos-tdep.o i386-dicos-tdep.o"
;;
i[34567]86-*-freebsd* | i[34567]86-*-kfreebsd*-gnu)
# Target: FreeBSD/i386
gdb_target_obs="i386-tdep.o i387-tdep.o i386bsd-tdep.o i386fbsd-tdep.o \
bsd-uthread.o fbsd-tdep.o solib-svr4.o"
;;
i[34567]86-*-netbsd* | i[34567]86-*-knetbsd*-gnu)
# Target: NetBSD/i386
gdb_target_obs="i386-tdep.o i387-tdep.o i386bsd-tdep.o i386nbsd-tdep.o \
nbsd-tdep.o solib-svr4.o"
;;
i[34567]86-*-openbsd*)
# Target: OpenBSD/i386
gdb_target_obs="i386-tdep.o i387-tdep.o i386bsd-tdep.o i386obsd-tdep.o \
obsd-tdep.o bsd-uthread.o solib-svr4.o"
;;
i[34567]86-*-nto*)
# Target: Intel 386 running qnx6.
gdb_target_obs="i386-tdep.o i387-tdep.o solib-svr4.o \
i386-nto-tdep.o nto-tdep.o"
build_gdbserver=yes
;;
i[34567]86-*-solaris2.1[0-9]* | x86_64-*-solaris2.1[0-9]*)
# Target: Solaris x86_64
gdb_target_obs="i386-tdep.o i387-tdep.o amd64-tdep.o amd64-sol2-tdep.o \
i386-sol2-tdep.o sol2-tdep.o solib-svr4.o"
;;
i[34567]86-*-solaris*)
# Target: Solaris x86
gdb_target_obs="i386-tdep.o i387-tdep.o i386-sol2-tdep.o sol2-tdep.o \
solib-svr4.o"
;;
i[34567]86-*-linux*)
# Target: Intel 386 running GNU/Linux
gdb_target_obs="i386-tdep.o i386-linux-tdep.o glibc-tdep.o i387-tdep.o \
solib-svr4.o symfile-mem.o \
linux-tdep.o linux-record.o"
if test "x$enable_64_bit_bfd" = "xyes"; then
# Target: GNU/Linux x86-64
gdb_target_obs="amd64-tdep.o amd64-linux-tdep.o ${gdb_target_obs}"
fi
build_gdbserver=yes
;;
i[34567]86-*-gnu*)
# Target: Intel 386 running the GNU Hurd
gdb_target_obs="i386-tdep.o i387-tdep.o i386gnu-tdep.o solib-svr4.o"
;;
i[34567]86-*-cygwin*)
# Target: Intel 386 running win32
gdb_target_obs="i386-tdep.o i386-cygwin-tdep.o i387-tdep.o \
windows-tdep.o"
build_gdbserver=yes
;;
i[34567]86-*-mingw32*)
# Target: Intel 386 running win32
gdb_target_obs="i386-tdep.o i386-cygwin-tdep.o i387-tdep.o \
windows-tdep.o"
build_gdbserver=yes
;;
i[34567]86-*-*)
# Target: i386
gdb_target_obs="i386-tdep.o i387-tdep.o"
;;
ia64-*-linux*)
# Target: Intel IA-64 running GNU/Linux
gdb_target_obs="ia64-tdep.o ia64-linux-tdep.o linux-tdep.o \
solib-svr4.o symfile-mem.o"
build_gdbserver=yes
;;
ia64-*-*vms*)
# Target: Intel IA-64 running OpenVMS
gdb_target_obs="ia64-tdep.o ia64-vms-tdep.o"
;;
ia64*-*-*)
# Target: Intel IA-64
gdb_target_obs="ia64-tdep.o"
;;
iq2000-*-*)
gdb_target_obs="iq2000-tdep.o"
gdb_sim=../sim/iq2000/libsim.a
;;
lm32-*-*)
gdb_target_obs="lm32-tdep.o"
gdb_sim=../sim/lm32/libsim.a
;;
m32c-*-*)
# Target: Renesas M32C family
gdb_target_obs="m32c-tdep.o"
# There may also be a SID / CGEN simulator for this,
# but we do have DJ Delorie's mini-sim.
gdb_sim=../sim/m32c/libsim.a
;;
m32r*-*-linux*)
# Target: Renesas M32R running GNU/Linux
gdb_target_obs="m32r-tdep.o m32r-linux-tdep.o remote-m32r-sdi.o \
glibc-tdep.o solib-svr4.o symfile-mem.o \
linux-tdep.o"
gdb_sim=../sim/m32r/libsim.a
build_gdbserver=yes
;;
m32r*-*-*)
# Target: Renesas m32r processor
gdb_target_obs="m32r-tdep.o monitor.o m32r-rom.o dsrec.o \
remote-m32r-sdi.o"
gdb_sim=../sim/m32r/libsim.a
;;
m68hc11*-*-*|m6811*-*-*)
# Target: Motorola 68HC11 processor
gdb_target_obs="m68hc11-tdep.o"
gdb_sim=../sim/m68hc11/libsim.a
;;
m68*-*-aout* | m68*-*-coff* | m68*-*-elf* | m68*-*-rtems* | m68*-*-uclinux* | \
fido-*-elf*)
# Target: Motorola m68k embedded (e.g. bug monitors)
gdb_target_obs="m68k-tdep.o monitor.o dbug-rom.o dsrec.o"
;;
m68*-*-linux*)
# Target: Motorola m68k with a.out and ELF
gdb_target_obs="m68k-tdep.o m68klinux-tdep.o solib-svr4.o \
linux-tdep.o glibc-tdep.o symfile-mem.o"
build_gdbserver=yes
;;
m68*-*-netbsd* | m68*-*-knetbsd*-gnu)
# Target: NetBSD/m68k
gdb_target_obs="m68k-tdep.o m68kbsd-tdep.o solib-svr4.o"
;;
m68*-*-openbsd*)
# Target: OpenBSD/m68k
gdb_target_obs="m68k-tdep.o m68kbsd-tdep.o solib-svr4.o"
;;
m88*-*-openbsd*)
# Target: OpenBSD/m88k
gdb_target_obs="m88k-tdep.o"
;;
mep-*-*)
# Target: Toshiba Media Processor (MEP)
gdb_target_obs="mep-tdep.o"
# No sim needed. Target uses SID.
;;
microblaze*-linux-*|microblaze*-*-linux*)
# Target: Xilinx MicroBlaze running Linux
gdb_target_obs="microblaze-tdep.o microblaze-linux-tdep.o microblaze-rom.o \
monitor.o dsrec.o solib-svr4.o symfile-mem.o linux-tdep.o"
gdb_sim=../sim/microblaze/libsim.a
;;
microblaze*-*-*)
# Target: Xilinx MicroBlaze running standalone
gdb_target_obs="microblaze-tdep.o microblaze-rom.o monitor.o dsrec.o"
gdb_sim=../sim/microblaze/libsim.a
;;
mips*-*-linux*)
# Target: Linux/MIPS
gdb_target_obs="mips-tdep.o mips-linux-tdep.o glibc-tdep.o \
solib-svr4.o symfile-mem.o linux-tdep.o"
gdb_sim=../sim/mips/libsim.a
build_gdbserver=yes
;;
mips*-*-netbsd* | mips*-*-knetbsd*-gnu)
# Target: MIPS running NetBSD
gdb_target_obs="mips-tdep.o mipsnbsd-tdep.o solib-svr4.o nbsd-tdep.o"
gdb_sim=../sim/mips/libsim.a
;;
mips64*-*-openbsd*)
# Target: OpenBSD/mips64
gdb_target_obs="mips-tdep.o mips64obsd-tdep.o obsd-tdep.o solib-svr4.o"
;;
mips*-sde*-elf*)
# Target: MIPS SDE
gdb_target_obs="mips-tdep.o mips-sde-tdep.o remote-mips.o"
gdb_sim=../sim/mips/libsim.a
;;
mips*-*-elf)
# Target: MIPS ELF
gdb_target_obs="mips-tdep.o remote-mips.o"
gdb_sim=../sim/mips/libsim.a
;;
mips*-*-*)
# Target: MIPS
gdb_target_obs="mips-tdep.o"
gdb_sim=../sim/mips/libsim.a
;;
mn10300-*-*)
# Target: Matsushita mn10300
gdb_target_obs="mn10300-tdep.o"
gdb_sim=../sim/mn10300/libsim.a
;;
msp430*-*-elf)
gdb_target_obs="msp430-tdep.o"
gdb_sim=../sim/msp430/libsim.a
;;
mt-*-*)
# Target: Morpho Technologies ms1 processor
gdb_target_obs="mt-tdep.o"
;;
nios2*-*-linux*)
# Target: Altera Nios II running Linux
gdb_target_obs="nios2-tdep.o nios2-linux-tdep.o solib-svr4.o \
symfile-mem.o glibc-tdep.o linux-tdep.o"
;;
nios2*-*-*)
# Target: Altera Nios II bare-metal
gdb_target_obs="nios2-tdep.o"
;;
powerpc*-*-freebsd*)
# Target: FreeBSD/powerpc
gdb_target_obs="rs6000-tdep.o ppc-sysv-tdep.o ppc64-tdep.o \
ppcfbsd-tdep.o fbsd-tdep.o solib-svr4.o \
ravenscar-thread.o ppc-ravenscar-thread.o"
;;
powerpc-*-netbsd* | powerpc-*-knetbsd*-gnu)
# Target: NetBSD/powerpc
gdb_target_obs="rs6000-tdep.o ppc-sysv-tdep.o ppcnbsd-tdep.o \
solib-svr4.o \
ravenscar-thread.o ppc-ravenscar-thread.o"
gdb_sim=../sim/ppc/libsim.a
;;
powerpc-*-openbsd*)
# Target: OpenBSD/powerpc
gdb_target_obs="rs6000-tdep.o ppc-sysv-tdep.o ppcobsd-tdep.o \
solib-svr4.o \
ravenscar-thread.o ppc-ravenscar-thread.o"
;;
powerpc-*-aix* | rs6000-*-* | powerpc64-*-aix*)
# Target: PowerPC running AIX
gdb_target_obs="rs6000-tdep.o rs6000-aix-tdep.o xcoffread.o \
ppc-sysv-tdep.o solib-aix.o \
ravenscar-thread.o ppc-ravenscar-thread.o"
;;
powerpc*-*-linux*)
# Target: PowerPC running Linux
gdb_target_obs="rs6000-tdep.o ppc-linux-tdep.o ppc-sysv-tdep.o \
ppc64-tdep.o solib-svr4.o solib-spu.o \
spu-multiarch.o \
glibc-tdep.o symfile-mem.o linux-tdep.o \
ravenscar-thread.o ppc-ravenscar-thread.o \
linux-record.o "
gdb_sim=../sim/ppc/libsim.a
build_gdbserver=yes
;;
powerpc-*-lynx*178)
# Target: PowerPC running Lynx178.
gdb_target_obs="rs6000-tdep.o rs6000-lynx178-tdep.o \
xcoffread.o monitor.o dsrec.o ppc-sysv-tdep.o \
ravenscar-thread.o ppc-ravenscar-thread.o"
;;
powerpc*-*-*)
# Target: PowerPC running eabi
gdb_target_obs="rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o \
dink32-rom.o ppc-sysv-tdep.o solib-svr4.o \
ravenscar-thread.o ppc-ravenscar-thread.o"
if test -f ../sim/ppc/Makefile; then
gdb_sim=../sim/ppc/libsim.a
fi
;;
s390*-*-linux*)
# Target: S390 running Linux
gdb_target_obs="s390-linux-tdep.o solib-svr4.o linux-tdep.o"
build_gdbserver=yes
;;
rl78-*-elf)
# Target: Renesas rl78
gdb_target_obs="rl78-tdep.o"
gdb_sim=../sim/rl78/libsim.a
;;
rx-*-elf)
# Target: Renesas RX
gdb_target_obs="rx-tdep.o"
gdb_sim=../sim/rx/libsim.a
;;
score-*-*)
# Target: S+core embedded system
gdb_target_obs="score-tdep.o"
if test -f ../sim/score/Makefile; then
gdb_sim=../sim/score/libsim.a
fi
build_gdbserver=yes
;;
sh*-*-linux*)
# Target: GNU/Linux Super-H
gdb_target_obs="sh-tdep.o sh64-tdep.o sh-linux-tdep.o monitor.o \
dsrec.o solib-svr4.o symfile-mem.o \
glibc-tdep.o linux-tdep.o"
gdb_sim=../sim/sh/libsim.a
build_gdbserver=yes
;;
sh*-*-netbsdelf* | sh*-*-knetbsd*-gnu)
# Target: NetBSD/sh
gdb_target_obs="sh-tdep.o shnbsd-tdep.o solib-svr4.o"
gdb_sim=../sim/sh/libsim.a
;;
sh*-*-openbsd*)
# Target: OpenBSD/sh
gdb_target_obs="sh-tdep.o sh64-tdep.o shnbsd-tdep.o solib-svr4.o"
;;
sh64-*-elf*)
# Target: Renesas/Super-H 64 bit with simulator
gdb_target_obs="sh-tdep.o sh64-tdep.o"
gdb_sim=../sim/sh64/libsim.a
;;
sh*)
# Target: Embedded Renesas Super-H with ICE and simulator
gdb_target_obs="sh-tdep.o sh64-tdep.o monitor.o dsrec.o"
gdb_sim=../sim/sh/libsim.a
;;
sparc-*-linux*)
# Target: GNU/Linux SPARC
gdb_target_obs="sparc-tdep.o sparc-sol2-tdep.o sol2-tdep.o \
sparc-linux-tdep.o solib-svr4.o symfile-mem.o \
linux-tdep.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
if test "x$enable_64_bit_bfd" = "xyes"; then
# Target: GNU/Linux UltraSPARC
gdb_target_obs="sparc64-tdep.o sparc64-sol2-tdep.o \
sparc64-linux-tdep.o ${gdb_target_obs}"
fi
build_gdbserver=yes
;;
sparc64-*-linux*)
# Target: GNU/Linux UltraSPARC
gdb_target_obs="sparc64-tdep.o sparc64-sol2-tdep.o sol2-tdep.o \
sparc64-linux-tdep.o sparc-tdep.o sparc-sol2-tdep.o \
sparc-linux-tdep.o solib-svr4.o linux-tdep.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
build_gdbserver=yes
;;
sparc*-*-freebsd* | sparc*-*-kfreebsd*-gnu)
# Target: FreeBSD/sparc64
gdb_target_obs="sparc-tdep.o sparc64-tdep.o sparc64fbsd-tdep.o \
fbsd-tdep.o solib-svr4.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
;;
sparc-*-netbsd* | sparc-*-knetbsd*-gnu)
# Target: NetBSD/sparc
gdb_target_obs="sparc-tdep.o sparcnbsd-tdep.o nbsd-tdep.o \
solib-svr4.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
;;
sparc64-*-netbsd* | sparc64-*-knetbsd*-gnu)
# Target: NetBSD/sparc64
gdb_target_obs="sparc64-tdep.o sparc64nbsd-tdep.o sparc-tdep.o \
sparcnbsd-tdep.o nbsd-tdep.o solib-svr4.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
;;
sparc-*-openbsd*)
# Target: OpenBSD/sparc
gdb_target_obs="sparc-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
nbsd-tdep.o obsd-tdep.o bsd-uthread.o solib-svr4.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
;;
sparc64-*-openbsd*)
# Target: OpenBSD/sparc64
gdb_target_obs="sparc64-tdep.o sparc64nbsd-tdep.o sparc64obsd-tdep.o \
sparc-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
nbsd-tdep.o obsd-tdep.o bsd-uthread.o solib-svr4.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
;;
sparc-*-solaris2.[0-6] | sparc-*-solaris2.[0-6].*)
# Target: Solaris SPARC
gdb_target_obs="sparc-tdep.o sparc-sol2-tdep.o sol2-tdep.o \
solib-svr4.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
;;
sparc-*-solaris2* | sparcv9-*-solaris2* | sparc64-*-solaris2*)
# Target: Solaris UltraSPARC
gdb_target_obs="sparc64-tdep.o sparc64-sol2-tdep.o sparc-tdep.o \
sparc-sol2-tdep.o sol2-tdep.o solib-svr4.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
;;
sparc-*-*)
# Target: SPARC
gdb_target_obs="sparc-tdep.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
gdb_sim=../sim/erc32/libsim.a
;;
sparc64-*-*)
# Target: UltraSPARC
gdb_target_obs="sparc-tdep.o sparc64-tdep.o \
ravenscar-thread.o sparc-ravenscar-thread.o"
;;
spu*-*-*)
# Target: Cell BE SPU
gdb_target_obs="spu-tdep.o"
build_gdbserver=yes
;;
tic6x-*-*linux)
# Target: GNU/Linux TI C6x
gdb_target_obs="tic6x-tdep.o tic6x-linux-tdep.o solib-dsbt.o \
glibc-tdep.o linux-tdep.o"
;;
tic6x-*-*)
# Target: TI C6X
gdb_target_obs="tic6x-tdep.o"
;;
tilegx-*-linux*)
# Target: TILE-Gx
gdb_target_obs="tilegx-tdep.o tilegx-linux-tdep.o solib-svr4.o \
symfile-mem.o glibc-tdep.o linux-tdep.o"
build_gdbserver=yes
;;
xstormy16-*-*)
# Target: Sanyo Xstormy16a processor
gdb_target_obs="xstormy16-tdep.o"
# No simulator libraries are needed -- target uses SID.
;;
v850*-*-elf | v850*-*-rtems*)
# Target: NEC V850 processor
gdb_target_obs="v850-tdep.o"
gdb_sim=../sim/v850/libsim.a
;;
vax-*-netbsd* | vax-*-knetbsd*-gnu)
# Target: NetBSD/vax
gdb_target_obs="vax-tdep.o vaxnbsd-tdep.o solib-svr4.o"
;;
vax-*-openbsd*)
# Target: OpenBSD/vax
gdb_target_obs="vax-tdep.o vaxobsd-tdep.o"
;;
vax-*-*)
# Target: VAX
gdb_target_obs="vax-tdep.o"
;;
x86_64-*-darwin*)
# Target: Darwin/x86-64
gdb_target_obs="amd64-tdep.o i386-tdep.o i387-tdep.o \
i386-darwin-tdep.o amd64-darwin-tdep.o \
solib-darwin.o"
;;
x86_64-*-dicos*)
# Target: DICOS/x86-64
gdb_target_obs="amd64-tdep.o i386-tdep.o i387-tdep.o \
dicos-tdep.o i386-dicos-tdep.o amd64-dicos-tdep.o"
;;
x86_64-*-linux*)
# Target: GNU/Linux x86-64
gdb_target_obs="amd64-tdep.o amd64-linux-tdep.o i386-tdep.o \
i387-tdep.o i386-linux-tdep.o glibc-tdep.o \
solib-svr4.o symfile-mem.o linux-tdep.o linux-record.o"
build_gdbserver=yes
;;
x86_64-*-freebsd* | x86_64-*-kfreebsd*-gnu)
# Target: FreeBSD/amd64
gdb_target_obs="amd64-tdep.o amd64fbsd-tdep.o i386-tdep.o \
i387-tdep.o i386bsd-tdep.o i386fbsd-tdep.o \
bsd-uthread.o fbsd-tdep.o solib-svr4.o"
;;
x86_64-*-mingw* | x86_64-*-cygwin*)
# Target: MingW/amd64
gdb_target_obs="amd64-tdep.o amd64-windows-tdep.o \
i386-tdep.o i386-cygwin-tdep.o i387-tdep.o \
windows-tdep.o"
build_gdbserver=yes
;;
x86_64-*-netbsd* | x86_64-*-knetbsd*-gnu)
# Target: NetBSD/amd64
gdb_target_obs="amd64-tdep.o amd64nbsd-tdep.o i386-tdep.o i387-tdep.o \
nbsd-tdep.o solib-svr4.o"
;;
x86_64-*-openbsd*)
# Target: OpenBSD/amd64
gdb_target_obs="amd64-tdep.o amd64obsd-tdep.o i386-tdep.o \
i387-tdep.o i386bsd-tdep.o i386obsd-tdep.o \
obsd-tdep.o bsd-uthread.o solib-svr4.o"
;;
xtensa*-*-linux*) gdb_target=linux
# Target: GNU/Linux Xtensa
gdb_target_obs="xtensa-tdep.o xtensa-config.o xtensa-linux-tdep.o \
solib-svr4.o symfile-mem.o linux-tdep.o"
build_gdbserver=yes
;;
xtensa*)
# Target: Tensilica Xtensa processors
gdb_target_obs="xtensa-tdep.o xtensa-config.o solib-svr4.o"
;;
esac
# map target onto default OS ABI
case "${targ}" in
*-*-freebsd* | *-*-kfreebsd*-gnu)
gdb_osabi=GDB_OSABI_FREEBSD_ELF ;;
*-*-linux* | *-*-uclinux*)
gdb_osabi=GDB_OSABI_LINUX ;;
*-*-nto*) gdb_osabi=GDB_OSABI_QNXNTO ;;
m68*-*-openbsd* | m88*-*-openbsd* | vax-*-openbsd*) ;;
*-*-openbsd*) gdb_osabi=GDB_OSABI_OPENBSD_ELF ;;
*-*-solaris*) gdb_osabi=GDB_OSABI_SOLARIS ;;
*-*-*-gnu*) ;; # prevent non-GNU kernels to match the Hurd rule below
*-*-gnu*) gdb_osabi=GDB_OSABI_HURD ;;
*-*-mingw32ce*) gdb_osabi=GDB_OSABI_WINCE ;;
*-*-mingw* | *-*-cygwin*)
gdb_osabi=GDB_OSABI_CYGWIN ;;
*-*-dicos*) gdb_osabi=GDB_OSABI_DICOS ;;
*-*-symbianelf*)
gdb_osabi=GDB_OSABI_SYMBIAN ;;
powerpc-*-aix* | rs6000-*-* | powerpc64-*-aix*)
gdb_osabi=GDB_OSABI_AIX ;;
esac
# Check whether this target supports gcore.
# Such target has to call set_gdbarch_find_memory_regions.
gdb_have_gcore=false
for t in x ${gdb_target_obs}; do
if test "$t" = linux-tdep.o; then
gdb_have_gcore=true
fi
done