mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
7fb45a6895
When configuring with '--enbale-cgen-maint' the default for both the
opcodes/ and sim/ directories is to assume that the cgen source is
within the binutils-gdb source tree as binutils-gdb/cgen/.
In the old cvs days, this worked well, as cgen was just another
sub-module of the single cvs repository and could easily be checked
out within the binutils-gdb directory, and managed by cvs in the
normal way.
Now that binutils-gdb is in git, while cgen is still in cvs, placing
the cgen respository within the binutils-gdb tree is more troublesome,
and it would be nice if the two tools could be kept separate.
Luckily there is already some initial code in the configure.ac files
for both opcodes/ and sim/ to support having cgen be located outside
of the binutils-gdb tree, however, this was speculative code written
imagining a future where cgen would be built and installed to some
location.
Right now there is no install support for cgen, and so the configure
code in opcodes/ and sim/ doesn't really do anything useful. In this
commit I repurpose this code to allow binutils-gdb to be configured so
that it can make use of a cgen source directory that is outside of the
binutils-gdb tree.
With this commit applied it is now possible to configure and build
binutils-gdb like this:
/path/to/binutils-gdb/src/configure --enable-cgen-maint=/path/to/cgen/src/cgen/
make all-opcodes
make -C opcodes run-cgen-all
Just in case anyone is still using cgen inside the binutils-gdb tree,
I have left the default behaviour of '--enable-cgen-maint' (with no
parameter) unchanged, that is it looks for the cgen directory as
'binutils-gdb/cgen/'.
opcodes/ChangeLog:
* configure.ac (enable-cgen-maint): Support passing path to cgen
source tree.
* configure: Regenerate.
sim/ChangeLog:
* common/acinclude.m4 (enable-cgen-maint): Support passing path to
cgen source tree.
* cris/configure: Regenerate.
* frv/configure: Regenerate.
* iq2000/configure: Regenerate.
* lm32/configure: Regenerate.
* m32r/configure: Regenerate.
* or1k/configure: Regenerate.
* sh64/configure: Regenerate.
877 lines
30 KiB
Plaintext
877 lines
30 KiB
Plaintext
# This file contains common code used by all simulators.
|
|
#
|
|
# SIM_AC_COMMON invokes AC macros used by all simulators and by the common
|
|
# directory. It is intended to be invoked before any target specific stuff.
|
|
# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
|
|
# It is intended to be invoked last.
|
|
#
|
|
# The simulator's configure.ac should look like:
|
|
#
|
|
# dnl Process this file with autoconf to produce a configure script.
|
|
# AC_PREREQ(2.64)dnl
|
|
# AC_INIT(Makefile.in)
|
|
# sinclude(../common/aclocal.m4)
|
|
#
|
|
# SIM_AC_COMMON
|
|
#
|
|
# ... target specific stuff ...
|
|
#
|
|
# SIM_AC_OUTPUT
|
|
|
|
# Include global overrides and fixes for Autoconf.
|
|
m4_include(../../config/override.m4)
|
|
sinclude([../../config/zlib.m4])
|
|
m4_include([../../config/plugins.m4])
|
|
m4_include([../../libtool.m4])
|
|
m4_include([../../ltoptions.m4])
|
|
m4_include([../../ltsugar.m4])
|
|
m4_include([../../ltversion.m4])
|
|
m4_include([../../lt~obsolete.m4])
|
|
sinclude([../../config/depstand.m4])
|
|
|
|
AC_DEFUN([SIM_AC_COMMON],
|
|
[
|
|
AC_REQUIRE([AC_PROG_CC])
|
|
# autoconf.info says this should be called right after AC_INIT.
|
|
AC_CONFIG_HEADER(ifelse([$1],,config.h,[$1]):config.in)
|
|
AC_CANONICAL_SYSTEM
|
|
AC_USE_SYSTEM_EXTENSIONS
|
|
AC_C_BIGENDIAN
|
|
AC_ARG_PROGRAM
|
|
AC_PROG_INSTALL
|
|
|
|
# Put a plausible default for CC_FOR_BUILD in Makefile.
|
|
if test -z "$CC_FOR_BUILD"; then
|
|
if test "x$cross_compiling" = "xno"; then
|
|
CC_FOR_BUILD='$(CC)'
|
|
else
|
|
CC_FOR_BUILD=gcc
|
|
fi
|
|
fi
|
|
AC_SUBST(CC_FOR_BUILD)
|
|
|
|
AC_SUBST(CFLAGS)
|
|
AC_SUBST(HDEFINES)
|
|
AR=${AR-ar}
|
|
AC_SUBST(AR)
|
|
AC_PROG_RANLIB
|
|
|
|
# Some of the common include files depend on bfd.h, and bfd.h checks
|
|
# that config.h is included first by testing that the PACKAGE macro
|
|
# is defined.
|
|
PACKAGE=sim
|
|
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of this package. ])
|
|
AC_SUBST(PACKAGE)
|
|
|
|
# Dependency checking.
|
|
ZW_CREATE_DEPDIR
|
|
ZW_PROG_COMPILER_DEPENDENCIES([CC])
|
|
|
|
# Check for the 'make' the user wants to use.
|
|
AC_CHECK_PROGS(MAKE, make)
|
|
MAKE_IS_GNU=
|
|
case "`$MAKE --version 2>&1 | sed 1q`" in
|
|
*GNU*)
|
|
MAKE_IS_GNU=yes
|
|
;;
|
|
esac
|
|
AM_CONDITIONAL(GMAKE, test "$MAKE_IS_GNU" = yes)
|
|
|
|
dnl We don't use gettext, but bfd does. So we do the appropriate checks
|
|
dnl to see if there are intl libraries we should link against.
|
|
ALL_LINGUAS=
|
|
ZW_GNU_GETTEXT_SISTER_DIR(../../intl)
|
|
|
|
# Check for common headers.
|
|
# FIXME: Seems to me this can cause problems for i386-windows hosts.
|
|
# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
|
|
AC_CHECK_HEADERS(stdlib.h string.h strings.h unistd.h time.h)
|
|
AC_CHECK_HEADERS(sys/time.h sys/times.h sys/resource.h sys/mman.h)
|
|
AC_CHECK_HEADERS(fcntl.h fpu_control.h)
|
|
AC_CHECK_HEADERS(dlfcn.h errno.h sys/stat.h)
|
|
AC_CHECK_FUNCS(getrusage time sigaction __setfpucw)
|
|
AC_CHECK_FUNCS(mmap munmap lstat truncate ftruncate posix_fallocate)
|
|
AC_CHECK_MEMBERS([[struct stat.st_dev], [struct stat.st_ino],
|
|
[struct stat.st_mode], [struct stat.st_nlink], [struct stat.st_uid],
|
|
[struct stat.st_gid], [struct stat.st_rdev], [struct stat.st_size],
|
|
[struct stat.st_blksize], [struct stat.st_blocks], [struct stat.st_atime],
|
|
[struct stat.st_mtime], [struct stat.st_ctime]], [], [],
|
|
[[#ifdef HAVE_SYS_TYPES_H
|
|
#include <sys/types.h>
|
|
#endif
|
|
#ifdef HAVE_SYS_STAT_H
|
|
#include <sys/stat.h>
|
|
#endif]])
|
|
AC_CHECK_TYPES(socklen_t, [], [],
|
|
[#include <sys/types.h>
|
|
#include <sys/socket.h>
|
|
])
|
|
|
|
# Check for socket libraries
|
|
AC_CHECK_LIB(socket, bind)
|
|
AC_CHECK_LIB(nsl, gethostbyname)
|
|
|
|
# BFD conditionally uses zlib, so we must link it in if libbfd does, by
|
|
# using the same condition.
|
|
AM_ZLIB
|
|
|
|
# BFD uses libdl when when plugins enabled.
|
|
AC_PLUGINS
|
|
AM_CONDITIONAL(PLUGINS, test "$plugins" = yes)
|
|
LT_INIT([dlopen])
|
|
AC_SUBST(lt_cv_dlopen_libs)
|
|
|
|
. ${srcdir}/../../bfd/configure.host
|
|
|
|
dnl Standard (and optional) simulator options.
|
|
dnl Eventually all simulators will support these.
|
|
dnl Do not add any here that cannot be supported by all simulators.
|
|
dnl Do not add similar but different options to a particular simulator,
|
|
dnl all shall eventually behave the same way.
|
|
|
|
|
|
dnl We don't use automake, but we still want to support
|
|
dnl --enable-maintainer-mode.
|
|
AM_MAINTAINER_MODE
|
|
|
|
|
|
dnl --enable-sim-debug is for developers of the simulator
|
|
dnl the allowable values are work-in-progress
|
|
AC_MSG_CHECKING([for sim debug setting])
|
|
sim_debug="0"
|
|
AC_ARG_ENABLE(sim-debug,
|
|
[AS_HELP_STRING([--enable-sim-debug=opts],
|
|
[Enable debugging flags (for developers of the sim itself)])],
|
|
[case "${enableval}" in
|
|
yes) sim_debug="7";;
|
|
no) sim_debug="0";;
|
|
*) sim_debug="($enableval)";;
|
|
esac])dnl
|
|
if test "$sim_debug" != "0"; then
|
|
AC_DEFINE_UNQUOTED([DEBUG], [$sim_debug], [Sim debug setting])
|
|
fi
|
|
AC_DEFINE_UNQUOTED([WITH_DEBUG], [$sim_debug], [Sim debug setting])
|
|
AC_MSG_RESULT($sim_debug)
|
|
|
|
|
|
dnl --enable-sim-stdio is for users of the simulator
|
|
dnl It determines if IO from the program is routed through STDIO (buffered)
|
|
AC_MSG_CHECKING([for sim stdio debug behavior])
|
|
sim_stdio="0"
|
|
AC_ARG_ENABLE(sim-stdio,
|
|
[AS_HELP_STRING([--enable-sim-stdio],
|
|
[Specify whether to use stdio for console input/output])],
|
|
[case "${enableval}" in
|
|
yes) sim_stdio="DO_USE_STDIO";;
|
|
no) sim_stdio="DONT_USE_STDIO";;
|
|
*) AC_MSG_ERROR([Unknown value $enableval passed to --enable-sim-stdio]);;
|
|
esac])dnl
|
|
AC_DEFINE_UNQUOTED([WITH_STDIO], [$sim_stdio], [How to route I/O])
|
|
AC_MSG_RESULT($sim_stdio)
|
|
|
|
|
|
dnl --enable-sim-trace is for users of the simulator
|
|
dnl The argument is either a bitmask of things to enable [exactly what is
|
|
dnl up to the simulator], or is a comma separated list of names of tracing
|
|
dnl elements to enable. The latter is only supported on simulators that
|
|
dnl use WITH_TRACE. Default to all tracing but internal debug.
|
|
AC_MSG_CHECKING([for sim trace settings])
|
|
sim_trace="~TRACE_debug"
|
|
AC_ARG_ENABLE(sim-trace,
|
|
[AS_HELP_STRING([--enable-sim-trace=opts],
|
|
[Enable tracing of simulated programs])],
|
|
[case "${enableval}" in
|
|
yes) sim_trace="-1";;
|
|
no) sim_trace="0";;
|
|
[[-0-9]]*)
|
|
sim_trace="'(${enableval})'";;
|
|
[[[:lower:]]]*)
|
|
sim_trace=""
|
|
for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
|
|
if test x"$sim_trace" = x; then
|
|
sim_trace="(TRACE_$x"
|
|
else
|
|
sim_trace="${sim_trace}|TRACE_$x"
|
|
fi
|
|
done
|
|
sim_trace="$sim_trace)" ;;
|
|
esac])dnl
|
|
AC_DEFINE_UNQUOTED([WITH_TRACE], [$sim_trace], [Sim trace settings])
|
|
AC_MSG_RESULT($sim_trace)
|
|
|
|
|
|
dnl --enable-sim-profile
|
|
dnl The argument is either a bitmask of things to enable [exactly what is
|
|
dnl up to the simulator], or is a comma separated list of names of profiling
|
|
dnl elements to enable. The latter is only supported on simulators that
|
|
dnl use WITH_PROFILE.
|
|
AC_MSG_CHECKING([for sim profile settings])
|
|
profile="1"
|
|
sim_profile="-1"
|
|
AC_ARG_ENABLE(sim-profile,
|
|
[AS_HELP_STRING([--enable-sim-profile=opts], [Enable profiling flags])],
|
|
[case "${enableval}" in
|
|
yes) profile="1" sim_profile="-1";;
|
|
no) profile="0" sim_profile="0";;
|
|
[[-0-9]]*)
|
|
profile="(${enableval})" sim_profile="(${enableval})";;
|
|
[[a-z]]*)
|
|
profile="1"
|
|
sim_profile=""
|
|
for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
|
|
if test x"$sim_profile" = x; then
|
|
sim_profile="(PROFILE_$x"
|
|
else
|
|
sim_profile="${sim_profile}|PROFILE_$x"
|
|
fi
|
|
done
|
|
sim_profile="$sim_profile)" ;;
|
|
esac])dnl
|
|
AC_DEFINE_UNQUOTED([PROFILE], [$profile], [Sim profile settings])
|
|
AC_DEFINE_UNQUOTED([WITH_PROFILE], [$sim_profile], [Sim profile settings])
|
|
AC_MSG_RESULT($sim_profile)
|
|
|
|
|
|
SIM_AC_OPTION_ASSERT
|
|
SIM_AC_OPTION_ENVIRONMENT
|
|
SIM_AC_OPTION_INLINE
|
|
|
|
ACX_PKGVERSION([SIM])
|
|
ACX_BUGURL([http://www.gnu.org/software/gdb/bugs/])
|
|
AC_DEFINE_UNQUOTED([PKGVERSION], ["$PKGVERSION"], [Additional package description])
|
|
AC_DEFINE_UNQUOTED([REPORT_BUGS_TO], ["$REPORT_BUGS_TO"], [Bug reporting address])
|
|
|
|
dnl Types used by common code
|
|
AC_TYPE_SIGNAL
|
|
|
|
dnl Detect exe extension
|
|
AC_EXEEXT
|
|
|
|
]) dnl End of SIM_AC_COMMON
|
|
|
|
|
|
dnl Additional SIM options that can (optionally) be configured
|
|
dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined.
|
|
dnl Simulators that wish to use the relevant option specify the macro
|
|
dnl in the simulator specific configure.ac file between the SIM_AC_COMMON
|
|
dnl and SIM_AC_OUTPUT lines.
|
|
|
|
|
|
dnl Specify the running environment.
|
|
dnl If the simulator invokes this in its configure.ac then without this option
|
|
dnl the default is the user environment and all are runtime selectable.
|
|
dnl If the simulator doesn't invoke this, only the user environment is
|
|
dnl supported.
|
|
dnl ??? Until there is demonstrable value in doing something more complicated,
|
|
dnl let's not.
|
|
AC_DEFUN([SIM_AC_OPTION_ENVIRONMENT],
|
|
[
|
|
AC_MSG_CHECKING([default sim environment setting])
|
|
sim_environment="ALL_ENVIRONMENT"
|
|
AC_ARG_ENABLE(sim-environment,
|
|
[AS_HELP_STRING([--enable-sim-environment=environment],
|
|
[Specify mixed, user, virtual or operating environment])],
|
|
[case "${enableval}" in
|
|
all | ALL) sim_environment="ALL_ENVIRONMENT";;
|
|
user | USER) sim_environment="USER_ENVIRONMENT";;
|
|
virtual | VIRTUAL) sim_environment="VIRTUAL_ENVIRONMENT";;
|
|
operating | OPERATING) sim_environment="OPERATING_ENVIRONMENT";;
|
|
*) AC_MSG_ERROR([Unknown value $enableval passed to --enable-sim-environment]);;
|
|
esac])dnl
|
|
AC_DEFINE_UNQUOTED([WITH_ENVIRONMENT], [$sim_environment], [Sim default environment])
|
|
AC_MSG_RESULT($sim_environment)
|
|
])
|
|
|
|
|
|
dnl Specify the alignment restrictions of the target architecture.
|
|
dnl Without this option all possible alignment restrictions are accommodated.
|
|
dnl arg[1] is hardwired target alignment
|
|
dnl arg[2] is default target alignment
|
|
AC_DEFUN([SIM_AC_OPTION_ALIGNMENT],
|
|
wire_alignment="[$1]"
|
|
default_alignment="[$2]"
|
|
[
|
|
AC_ARG_ENABLE(sim-alignment,
|
|
[AS_HELP_STRING([--enable-sim-alignment=align],
|
|
[Specify strict, nonstrict or forced alignment of memory accesses])],
|
|
[case "${enableval}" in
|
|
strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
|
|
nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
|
|
forced | FORCED) sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
|
|
yes) if test x"$wire_alignment" != x; then
|
|
sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
|
|
else
|
|
if test x"$default_alignment" != x; then
|
|
sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
|
|
else
|
|
echo "No hard-wired alignment for target $target" 1>&6
|
|
sim_alignment="-DWITH_ALIGNMENT=0"
|
|
fi
|
|
fi;;
|
|
no) if test x"$default_alignment" != x; then
|
|
sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
|
|
else
|
|
if test x"$wire_alignment" != x; then
|
|
sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
|
|
else
|
|
echo "No default alignment for target $target" 1>&6
|
|
sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
|
|
fi
|
|
fi;;
|
|
*) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
|
|
echo "Setting alignment flags = $sim_alignment" 6>&1
|
|
fi],
|
|
[if test x"$default_alignment" != x; then
|
|
sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
|
|
else
|
|
if test x"$wire_alignment" != x; then
|
|
sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
|
|
else
|
|
sim_alignment=
|
|
fi
|
|
fi])dnl
|
|
])dnl
|
|
AC_SUBST(sim_alignment)
|
|
|
|
|
|
dnl Conditionally compile in assertion statements.
|
|
AC_DEFUN([SIM_AC_OPTION_ASSERT],
|
|
[
|
|
AC_MSG_CHECKING([whether to enable sim asserts])
|
|
sim_assert="1"
|
|
AC_ARG_ENABLE(sim-assert,
|
|
[AS_HELP_STRING([--enable-sim-assert],
|
|
[Specify whether to perform random assertions])],
|
|
[case "${enableval}" in
|
|
yes) sim_assert="1";;
|
|
no) sim_assert="0";;
|
|
*) AC_MSG_ERROR([--enable-sim-assert does not take a value]);;
|
|
esac])dnl
|
|
AC_DEFINE_UNQUOTED([WITH_ASSERT], [$sim_assert], [Sim assert settings])
|
|
AC_MSG_RESULT($sim_assert)
|
|
])
|
|
|
|
|
|
|
|
dnl --enable-sim-bitsize is for developers of the simulator
|
|
dnl It specifies the number of BITS in the target.
|
|
dnl arg[1] is the number of bits in a word
|
|
dnl arg[2] is the number assigned to the most significant bit
|
|
dnl arg[3] is the number of bits in an address
|
|
dnl arg[4] is the number of bits in an OpenFirmware cell.
|
|
dnl FIXME: this information should be obtained from bfd/archure
|
|
AC_DEFUN([SIM_AC_OPTION_BITSIZE],
|
|
wire_word_bitsize="[$1]"
|
|
wire_word_msb="[$2]"
|
|
wire_address_bitsize="[$3]"
|
|
wire_cell_bitsize="[$4]"
|
|
[AC_ARG_ENABLE(sim-bitsize,
|
|
[AS_HELP_STRING([--enable-sim-bitsize=N], [Specify target bitsize (32 or 64)])],
|
|
[sim_bitsize=
|
|
case "${enableval}" in
|
|
64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
|
|
32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
|
|
64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
|
|
32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
|
|
32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
|
|
sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
|
|
else
|
|
sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
|
|
fi ;;
|
|
64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
|
|
sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
|
|
else
|
|
sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
|
|
fi ;;
|
|
*) AC_MSG_ERROR("--enable-sim-bitsize was given $enableval. Expected 32 or 64") ;;
|
|
esac
|
|
# address bitsize
|
|
tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9]]*,*//"`
|
|
case x"${tmp}" in
|
|
x ) ;;
|
|
x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
|
|
x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
|
|
* ) AC_MSG_ERROR("--enable-sim-bitsize was given address size $enableval. Expected 32 or 64") ;;
|
|
esac
|
|
# cell bitsize
|
|
tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9*]]*,*[[0-9]]*,*//"`
|
|
case x"${tmp}" in
|
|
x ) ;;
|
|
x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
|
|
x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
|
|
* ) AC_MSG_ERROR("--enable-sim-bitsize was given cell size $enableval. Expected 32 or 64") ;;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
|
|
echo "Setting bitsize flags = $sim_bitsize" 6>&1
|
|
fi],
|
|
[sim_bitsize=""
|
|
if test x"$wire_word_bitsize" != x; then
|
|
sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
|
|
fi
|
|
if test x"$wire_word_msb" != x; then
|
|
sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
|
|
fi
|
|
if test x"$wire_address_bitsize" != x; then
|
|
sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
|
|
fi
|
|
if test x"$wire_cell_bitsize" != x; then
|
|
sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
|
|
fi])dnl
|
|
])
|
|
AC_SUBST(sim_bitsize)
|
|
|
|
|
|
|
|
dnl --enable-sim-endian={yes,no,big,little} is for simulators
|
|
dnl that support both big and little endian targets.
|
|
dnl arg[1] is hardwired target endianness.
|
|
dnl arg[2] is default target endianness.
|
|
AC_DEFUN([SIM_AC_OPTION_ENDIAN],
|
|
[
|
|
wire_endian="[$1]"
|
|
default_endian="[$2]"
|
|
AC_ARG_ENABLE(sim-endian,
|
|
[AS_HELP_STRING([--enable-sim-endian=endian],
|
|
[Specify target byte endian orientation])],
|
|
[case "${enableval}" in
|
|
b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
|
|
l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
|
|
yes) if test x"$wire_endian" != x; then
|
|
sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
|
|
else
|
|
if test x"$default_endian" != x; then
|
|
sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
|
|
else
|
|
echo "No hard-wired endian for target $target" 1>&6
|
|
sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
|
|
fi
|
|
fi;;
|
|
no) if test x"$default_endian" != x; then
|
|
sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
|
|
else
|
|
if test x"$wire_endian" != x; then
|
|
sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
|
|
else
|
|
echo "No default endian for target $target" 1>&6
|
|
sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
|
|
fi
|
|
fi;;
|
|
*) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
|
|
echo "Setting endian flags = $sim_endian" 6>&1
|
|
fi],
|
|
[if test x"$default_endian" != x; then
|
|
sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
|
|
else
|
|
if test x"$wire_endian" != x; then
|
|
sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
|
|
else
|
|
sim_endian=
|
|
fi
|
|
fi])dnl
|
|
])
|
|
AC_SUBST(sim_endian)
|
|
|
|
|
|
dnl --enable-sim-float is for developers of the simulator
|
|
dnl It specifies the presence of hardware floating point
|
|
dnl And optionally the bitsize of the floating point register.
|
|
dnl arg[1] specifies the presence (or absence) of floating point hardware
|
|
dnl arg[2] specifies the number of bits in a floating point register
|
|
AC_DEFUN([SIM_AC_OPTION_FLOAT],
|
|
[
|
|
default_sim_float="[$1]"
|
|
default_sim_float_bitsize="[$2]"
|
|
AC_ARG_ENABLE(sim-float,
|
|
[AS_HELP_STRING([--enable-sim-float],
|
|
[Specify that the target processor has floating point hardware])],
|
|
[case "${enableval}" in
|
|
yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
|
|
no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
|
|
32) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=32";;
|
|
64) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=64";;
|
|
*) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
|
|
echo "Setting float flags = $sim_float" 6>&1
|
|
fi],[
|
|
sim_float=
|
|
if test x"${default_sim_float}" != x""; then
|
|
sim_float="-DWITH_FLOATING_POINT=${default_sim_float}"
|
|
fi
|
|
if test x"${default_sim_float_bitsize}" != x""; then
|
|
sim_float="$sim_float -DWITH_TARGET_FLOATING_POINT_BITSIZE=${default_sim_float_bitsize}"
|
|
fi
|
|
])dnl
|
|
])
|
|
AC_SUBST(sim_float)
|
|
|
|
|
|
dnl The argument is the default cache size if none is specified.
|
|
AC_DEFUN([SIM_AC_OPTION_SCACHE],
|
|
[
|
|
default_sim_scache="ifelse([$1],,0,[$1])"
|
|
AC_ARG_ENABLE(sim-scache,
|
|
[AS_HELP_STRING([--enable-sim-scache=size],
|
|
[Specify simulator execution cache size])],
|
|
[case "${enableval}" in
|
|
yes) sim_scache="-DWITH_SCACHE=${default_sim_scache}";;
|
|
no) sim_scache="-DWITH_SCACHE=0" ;;
|
|
[[0-9]]*) sim_scache="-DWITH_SCACHE=${enableval}";;
|
|
*) AC_MSG_ERROR("Bad value $enableval passed to --enable-sim-scache");
|
|
sim_scache="";;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$sim_scache" != x""; then
|
|
echo "Setting scache size = $sim_scache" 6>&1
|
|
fi],[sim_scache="-DWITH_SCACHE=${default_sim_scache}"])
|
|
])
|
|
AC_SUBST(sim_scache)
|
|
|
|
|
|
dnl The argument is the default model if none is specified.
|
|
AC_DEFUN([SIM_AC_OPTION_DEFAULT_MODEL],
|
|
[
|
|
default_sim_default_model="ifelse([$1],,0,[$1])"
|
|
AC_ARG_ENABLE(sim-default-model,
|
|
[AS_HELP_STRING([--enable-sim-default-model=model],
|
|
[Specify default model to simulate])],
|
|
[case "${enableval}" in
|
|
yes|no) AC_MSG_ERROR("Missing argument to --enable-sim-default-model");;
|
|
*) sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
|
|
echo "Setting default model = $sim_default_model" 6>&1
|
|
fi],[sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"])
|
|
])
|
|
AC_SUBST(sim_default_model)
|
|
|
|
|
|
dnl --enable-sim-hardware is for users of the simulator
|
|
dnl arg[1] Enable sim-hw by default? ("yes" or "no")
|
|
dnl arg[2] is a space separated list of devices that override the defaults
|
|
dnl arg[3] is a space separated list of extra target specific devices.
|
|
AC_DEFUN([SIM_AC_OPTION_HARDWARE],
|
|
[
|
|
if test "[$2]"; then
|
|
hardware="[$2]"
|
|
else
|
|
hardware="cfi core pal glue"
|
|
fi
|
|
hardware="$hardware [$3]"
|
|
|
|
sim_hw_cflags="-DWITH_HW=1"
|
|
sim_hw="$hardware"
|
|
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"
|
|
|
|
AC_ARG_ENABLE(sim-hardware,
|
|
[AS_HELP_STRING([--enable-sim-hardware=LIST],
|
|
[Specify the hardware to be included in the build.])],
|
|
,[enable_sim_hardware="[$1]"])
|
|
case ${enable_sim_hardware} in
|
|
yes|no) ;;
|
|
,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
|
|
*,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
|
|
*) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
|
|
esac
|
|
|
|
if test "$enable_sim_hardware" = no; then
|
|
sim_hw_objs=
|
|
sim_hw_cflags="-DWITH_HW=0"
|
|
sim_hw=
|
|
else
|
|
sim_hw_cflags="-DWITH_HW=1"
|
|
# remove duplicates
|
|
sim_hw=""
|
|
sim_hw_objs="\$(SIM_COMMON_HW_OBJS)"
|
|
for i in $hardware ; do
|
|
case " $sim_hw " in
|
|
*" $i "*) ;;
|
|
*) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
|
|
esac
|
|
done
|
|
# mingw does not support sockser
|
|
case ${host} in
|
|
*mingw*) ;;
|
|
*) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device
|
|
# that you instatiate. Instead, other code will call into it directly.
|
|
# At some point, we should convert it over.
|
|
sim_hw_objs="$sim_hw_objs dv-sockser.o"
|
|
AC_DEFINE_UNQUOTED(
|
|
[HAVE_DV_SOCKSER], 1, [Define if dv-sockser is usable.])
|
|
;;
|
|
esac
|
|
if test x"$silent" != x"yes"; then
|
|
echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
|
|
fi
|
|
dnl Some devices require extra libraries.
|
|
case " $hardware " in
|
|
*" cfi "*) AC_CHECK_LIB(m, log2);;
|
|
esac
|
|
fi
|
|
])
|
|
AC_SUBST(sim_hw_cflags)
|
|
AC_SUBST(sim_hw_objs)
|
|
AC_SUBST(sim_hw)
|
|
|
|
|
|
dnl --enable-sim-inline is for users that wish to ramp up the simulator's
|
|
dnl performance by inlining functions.
|
|
dnl Default sims to no inlining.
|
|
AC_DEFUN([SIM_AC_OPTION_INLINE],
|
|
[
|
|
sim_inline="-DDEFAULT_INLINE=m4_ifblank([$1],[0],[$1])"
|
|
AC_ARG_ENABLE(sim-inline,
|
|
[AS_HELP_STRING([--enable-sim-inline=inlines],
|
|
[Specify which functions should be inlined])],
|
|
[sim_inline=""
|
|
case "$enableval" in
|
|
no) sim_inline="-DDEFAULT_INLINE=0";;
|
|
0) sim_inline="-DDEFAULT_INLINE=0";;
|
|
yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;
|
|
1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
|
|
*) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
|
|
new_flag=""
|
|
case "$x" in
|
|
*_INLINE=*) new_flag="-D$x";;
|
|
*=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
|
|
*_INLINE) new_flag="-D$x=ALL_C_INLINE";;
|
|
*) new_flag="-D$x""_INLINE=ALL_C_INLINE";;
|
|
esac
|
|
if test x"$sim_inline" = x""; then
|
|
sim_inline="$new_flag"
|
|
else
|
|
sim_inline="$sim_inline $new_flag"
|
|
fi
|
|
done;;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
|
|
echo "Setting inline flags = $sim_inline" 6>&1
|
|
fi])dnl
|
|
])
|
|
AC_SUBST(sim_inline)
|
|
|
|
|
|
AC_DEFUN([SIM_AC_OPTION_RESERVED_BITS],
|
|
[
|
|
default_sim_reserved_bits="ifelse([$1],,1,[$1])"
|
|
AC_ARG_ENABLE(sim-reserved-bits,
|
|
[AS_HELP_STRING([--enable-sim-reserved-bits],
|
|
[Specify whether to check reserved bits in instruction])],
|
|
[case "${enableval}" in
|
|
yes) sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
|
|
no) sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
|
|
*) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
|
|
echo "Setting reserved flags = $sim_reserved_bits" 6>&1
|
|
fi],[sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"])dnl
|
|
])
|
|
AC_SUBST(sim_reserved_bits)
|
|
|
|
|
|
AC_DEFUN([SIM_AC_OPTION_SMP],
|
|
[
|
|
AC_MSG_CHECKING([number of sim cpus to support])
|
|
default_sim_smp="ifelse([$1],,5,[$1])"
|
|
sim_smp="$default_sim_smp""
|
|
AC_ARG_ENABLE(sim-smp,
|
|
[AS_HELP_STRING([--enable-sim-smp=n],
|
|
[Specify number of processors to configure for (default ${default_sim_smp})])],
|
|
[case "${enableval}" in
|
|
yes) sim_smp="5";;
|
|
no) sim_smp="0";;
|
|
*) sim_smp="$enableval";;
|
|
esac])dnl
|
|
sim_igen_smp="-N ${sim_smp}"
|
|
AC_DEFINE_UNQUOTED([WITH_SMP], [$sim_smp], [Sim SMP settings])
|
|
AC_MSG_RESULT($sim_smp)
|
|
])
|
|
|
|
|
|
AC_DEFUN([SIM_AC_OPTION_XOR_ENDIAN],
|
|
[
|
|
AC_MSG_CHECKING([for xor endian support])
|
|
default_sim_xor_endian="ifelse([$1],,8,[$1])"
|
|
sim_xor_endian="$default_sim_xor_endian"
|
|
AC_ARG_ENABLE(sim-xor-endian,
|
|
[AS_HELP_STRING([--enable-sim-xor-endian=n],
|
|
[Specify number bytes involved in XOR bi-endian mode (default ${default_sim_xor_endian})])],
|
|
[case "${enableval}" in
|
|
yes) sim_xor_endian="8";;
|
|
no) sim_xor_endian="0";;
|
|
*) sim_xor_endian="$enableval";;
|
|
esac])dnl
|
|
AC_DEFINE_UNQUOTED([WITH_XOR_ENDIAN], [$sim_xor_endian], [Sim XOR endian settings])
|
|
AC_MSG_RESULT($sim_smp)
|
|
])
|
|
|
|
|
|
dnl --enable-build-warnings is for developers of the simulator.
|
|
dnl it enables extra GCC specific warnings.
|
|
AC_DEFUN([SIM_AC_OPTION_WARNINGS],
|
|
[
|
|
AC_ARG_ENABLE(werror,
|
|
AS_HELP_STRING([--enable-werror], [treat compile warnings as errors]),
|
|
[case "${enableval}" in
|
|
yes | y) ERROR_ON_WARNING="yes" ;;
|
|
no | n) ERROR_ON_WARNING="no" ;;
|
|
*) AC_MSG_ERROR(bad value ${enableval} for --enable-werror) ;;
|
|
esac])
|
|
|
|
# Enable -Werror by default when using gcc
|
|
if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
|
|
ERROR_ON_WARNING=yes
|
|
fi
|
|
|
|
WERROR_CFLAGS=""
|
|
if test "${ERROR_ON_WARNING}" = yes ; then
|
|
# NOTE: Disabled in the sim dir due to most sims generating warnings.
|
|
# WERROR_CFLAGS="-Werror"
|
|
true
|
|
fi
|
|
|
|
build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \
|
|
-Wpointer-sign \
|
|
-Wno-unused -Wunused-value -Wunused-function \
|
|
-Wno-switch -Wno-char-subscripts -Wmissing-prototypes
|
|
-Wdeclaration-after-statement -Wempty-body -Wmissing-parameter-type \
|
|
-Wold-style-declaration -Wold-style-definition"
|
|
|
|
# Enable -Wno-format by default when using gcc on mingw since many
|
|
# GCC versions complain about %I64.
|
|
case "${host}" in
|
|
*-*-mingw32*) build_warnings="$build_warnings -Wno-format" ;;
|
|
*) build_warnings="$build_warnings -Wformat-nonliteral" ;;
|
|
esac
|
|
|
|
AC_ARG_ENABLE(build-warnings,
|
|
AS_HELP_STRING([--enable-build-warnings], [enable build-time compiler warnings if gcc is used]),
|
|
[case "${enableval}" in
|
|
yes) ;;
|
|
no) build_warnings="-w";;
|
|
,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
|
|
build_warnings="${build_warnings} ${t}";;
|
|
*,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
|
|
build_warnings="${t} ${build_warnings}";;
|
|
*) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
|
|
echo "Setting compiler warning flags = $build_warnings" 6>&1
|
|
fi])dnl
|
|
AC_ARG_ENABLE(sim-build-warnings,
|
|
AS_HELP_STRING([--enable-sim-build-warnings], [enable SIM specific build-time compiler warnings if gcc is used]),
|
|
[case "${enableval}" in
|
|
yes) ;;
|
|
no) build_warnings="-w";;
|
|
,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
|
|
build_warnings="${build_warnings} ${t}";;
|
|
*,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
|
|
build_warnings="${t} ${build_warnings}";;
|
|
*) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
|
|
esac
|
|
if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
|
|
echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
|
|
fi])dnl
|
|
WARN_CFLAGS=""
|
|
if test "x${build_warnings}" != x -a "x$GCC" = xyes
|
|
then
|
|
AC_MSG_CHECKING(compiler warning flags)
|
|
# Separate out the -Werror flag as some files just cannot be
|
|
# compiled with it enabled.
|
|
for w in ${build_warnings}; do
|
|
case $w in
|
|
-Werr*) WERROR_CFLAGS=-Werror ;;
|
|
*) # Check that GCC accepts it
|
|
saved_CFLAGS="$CFLAGS"
|
|
CFLAGS="$CFLAGS $w"
|
|
AC_TRY_COMPILE([],[],WARN_CFLAGS="${WARN_CFLAGS} $w",)
|
|
CFLAGS="$saved_CFLAGS"
|
|
esac
|
|
done
|
|
AC_MSG_RESULT(${WARN_CFLAGS} ${WERROR_CFLAGS})
|
|
fi
|
|
])
|
|
AC_SUBST(WARN_CFLAGS)
|
|
AC_SUBST(WERROR_CFLAGS)
|
|
|
|
|
|
dnl Generate the Makefile in a target specific directory.
|
|
dnl Substitutions aren't performed on the file in AC_SUBST_FILE,
|
|
dnl so this is a cover macro to tuck the details away of how we cope.
|
|
dnl We cope by having autoconf generate two files and then merge them into
|
|
dnl one afterwards. The two pieces of the common fragment are inserted into
|
|
dnl the target's fragment at the appropriate points.
|
|
|
|
AC_DEFUN([SIM_AC_OUTPUT],
|
|
[
|
|
dnl Make @cgen_breaks@ non-null only if the sim uses CGEN.
|
|
cgen_breaks=""
|
|
if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
|
|
cgen_breaks="break cgen_rtx_error";
|
|
fi
|
|
AC_SUBST(cgen_breaks)
|
|
AC_CONFIG_FILES(Makefile.sim:Makefile.in)
|
|
AC_CONFIG_FILES(Make-common.sim:../common/Make-common.in)
|
|
AC_CONFIG_FILES(.gdbinit:../common/gdbinit.in)
|
|
AC_CONFIG_COMMANDS([Makefile],
|
|
[echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
|
|
rm -f Makesim1.tmp Makesim2.tmp Makefile
|
|
sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
|
|
sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
|
|
sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
|
|
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
|
|
<Makefile.sim >Makefile
|
|
rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
|
|
])
|
|
AC_CONFIG_COMMANDS([stamp-h], [echo > stamp-h])
|
|
AC_OUTPUT
|
|
])
|
|
|
|
sinclude(../../config/gettext-sister.m4)
|
|
sinclude(../../config/acx.m4)
|
|
|
|
dnl --enable-cgen-maint support
|
|
AC_DEFUN([SIM_AC_OPTION_CGEN_MAINT],
|
|
[
|
|
cgen_maint=no
|
|
dnl Default is to use one in build tree.
|
|
cgen=guile
|
|
cgendir='$(srcdir)/../../cgen'
|
|
dnl Having --enable-maintainer-mode take arguments is another way to go.
|
|
dnl ??? One can argue --with is more appropriate if one wants to specify
|
|
dnl a directory name, but what we're doing here is an enable/disable kind
|
|
dnl of thing and specifying both --enable and --with is klunky.
|
|
dnl If you reeely want this to be --with, go ahead and change it.
|
|
AC_ARG_ENABLE(cgen-maint,
|
|
[AS_HELP_STRING([--enable-cgen-maint[=DIR]], [build cgen generated files])],
|
|
[case "${enableval}" in
|
|
yes) cgen_maint=yes ;;
|
|
no) cgen_maint=no ;;
|
|
*)
|
|
# Argument is a directory where cgen can be found. In some
|
|
# future world cgen could be installable, but right now this
|
|
# is not the case. Instead we assume the directory is a path
|
|
# to the cgen source tree.
|
|
cgen_maint=yes
|
|
if test -r ${enableval}/iformat.scm; then
|
|
# This looks like a cgen source tree.
|
|
cgendir=${enableval}
|
|
else
|
|
AC_MSG_ERROR(${enableval} doesn't look like a cgen source tree)
|
|
fi
|
|
;;
|
|
esac])dnl
|
|
dnl AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} != xno)
|
|
if test x${cgen_maint} != xno ; then
|
|
CGEN_MAINT=''
|
|
else
|
|
CGEN_MAINT='#'
|
|
fi
|
|
AC_SUBST(CGEN_MAINT)
|
|
AC_SUBST(cgendir)
|
|
AC_SUBST(cgen)
|
|
])
|