mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2025-02-11 13:02:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
08be322439
binutils-gdb/gold/ChangeLog
Alan Modra 08be322439 PowerPC PLT16 relocations 
The PowerPC64 ELFv2 ABI and the PowerPC SysV ABI support a number of
relocations that can be used to create and access a PLT entry.
However, the relocs are not well defined.  The PLT16 family of relocs
talk about "the section offset or address of the procedure linkage
table entry".  It's plain that we do need a relative address when PIC
as otherwise we'd have dynamic text relocations, but "section offset"
doesn't specify which section.  The most obvious one, ".plt", isn't
that useful because there is no readily available way of addressing
the start of the ".plt" section.  Much more useful would be "the
GOT/TOC-pointer relative offset of the procedure linkage table entry",
and I suppose you could argue that is a "section offset" of sorts.
For PowerPC64 it is better to use the same TOC-pointer relative
addressing even when non-PIC, since ".plt" may be located outside the
range of a 32-bit address.  However, for ppc32 we do want an absolute
address when non-PIC as a GOT pointer may not be set up.  Also, for
ppc32 PIC we have a similar situation to R_PPC_PLTREL24 in that the
GOT pointer is set to a location in the .got2 section and we need to
specify the .got2 offset in the PLT16 reloc addend.

This patch supports PLT16 relocations using these semantics.  This is
not an ABI change for ppc32 since the relocations were not previously
supported by GNU ld, but is for ppc64 where some of the PLT16 relocs
were supported.  I'm not particularly concerned since the old ppc64
PLT16 reloc semantics made them almost completely useless.

bfd/
	* elf32-ppc.c (ppc_elf_check_relocs): Handle PLT16 relocs.
	(ppc_elf_relocate_section): Likewise.
	* elf64-ppc.c (ppc64_elf_check_relocs): Handle PLT16_LO_DS.
	(ppc64_elf_relocate_section): Likewise.  Correct PLT16
	resolution to plt entry relative to toc pointer.
gold/
	* powerpc.cc (Target_powerpc::plt_off): New functions.
	(is_plt16_reloc): New function.
	(Stub_table::plt_off): Use Target_powerpc::plt_off.
	(Stub_table::plt_call_size): Use plt_off.
	(Stub_table::do_write): Likewise.
	(Target_powerpc::Scan::get_reference_flags): Return RELATIVE_REF
	for PLT16 relocations.
	(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Return true
	for PLT16 relocations.
	(Target_powerpc::Scan::global): Make a PLT entry for PLT16 relocations.
	(Target_powerpc::Relocate::relocate): Support PLT16 relocations.
	(Powerpc_scan_relocatable_reloc::global_strategy): Return RELOC_SPECIAL
	for ppc32 plt16 relocs.
2018-04-09 16:56:35 +09:30

348 lines
14 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2018-04-09 Alan Modra <amodra@gmail.com>
* powerpc.cc (Target_powerpc::plt_off): New functions.
(is_plt16_reloc): New function.
(Stub_table::plt_off): Use Target_powerpc::plt_off.
(Stub_table::plt_call_size): Use plt_off.
(Stub_table::do_write): Likewise.
(Target_powerpc::Scan::get_reference_flags): Return RELATIVE_REF
for PLT16 relocations.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Return true
for PLT16 relocations.
(Target_powerpc::Scan::global): Make a PLT entry for PLT16 relocations.
(Target_powerpc::Relocate::relocate): Support PLT16 relocations.
(Powerpc_scan_relocatable_reloc::global_strategy): Return RELOC_SPECIAL
for ppc32 plt16 relocs.
2018-04-06 Cary Coutant <ccoutant@gmail.com>
* object.cc (Sized_relobj_file::include_section_group): Store
reference to Kept_section info for discarded comdat sections
regardless of size. Move size checking to map_to_kept_section.
(Sized_relobj_file::include_linkonce_section): Likewise.
(Sized_relobj_file::map_to_kept_section): Add section name parameter.
Insert size checking logic from above functions.
(Sized_relobj_file::find_kept_section_object): New method.
(Sized_relobj_file::get_symbol_name): New method.
* object.h (Sized_relobj_file::map_to_kept_section): Add section_name
parameter. Adjust all callers.
(Sized_relobj_file::find_kept_section_object): New method.
(Sized_relobj_file::get_symbol_name): New method.
(Sized_relobj_file::Kept_comdat_section): Replace object and shndx
fields with sh_size, kept_section, symndx, and is_comdat fields.
(Sized_relobj_file::set_kept_comdat_section): Replace kept_object
and kept_shndx parameters with is_comdat, symndx, sh_size, and
kept_section.
(Sized_relobj_file::get_kept_comdat_section): Likewise.
* target-reloc.h (enum Comdat_behavior): Change CB_WARNING to CB_ERROR.
Adjust all references.
(issue_undefined_symbol_error): New function template.
(relocate_section): Pass section name to map_to_kept_section.
Move discarded section code to new function above.
* aarch64.cc (Target_aarch64::scan_reloc_section_for_stubs): Move
declaration for gsym out one level. Call issue_discarded_error.
* arm.cc (Target_arm::scan_reloc_section_for_stubs): Likewise.
* powerpc.cc (Relocate_comdat_behavior): Change CB_WARNING to CB_ERROR.
2018-04-05 Cary Coutant <ccoutant@gmail.com>
* target-reloc.h (relocate_section): Add local symbol index or global
symbol name to warning about relocation that refers to discarded
section.
2018-04-05 James Cowgill <james.cowgill@mips.com>
Revert previous patch and apply revised patch.
PR gold/22770
* mips.cc (Mips_got_info::record_got_page_entry): Don't insert
Got_page_entry for object's GOT.
(Mips_got_info::add_got_page_entries): Add all pages from from's GOT.
Rename to add_got_page_count.
(Got_page_entry): Remove num_pages.
2018-04-05 James Cowgill <james.cowgill@mips.com>
PR gold/22770
* mips.cc (Mips_got_info::record_got_page_entry): Fetch existing
page entries for the object's GOT.
2018-04-05 Alan Modra <amodra@gmail.com>
* powerpc.cc (Target_powerpc::make_brlt_section): Make .branch_lt relro.
2018-04-04 Nick Clifton <nickc@redhat.com>
* po/es.po: Updated Spanish translation.
2018-04-02 Cary Coutant <ccoutant@gmail.com>
PR gold/23016
* incremental.cc (can_incremental_update): Check for unwind section
type.
* layout.h (Layout::layout): Add sh_type parameter.
* layout.cc (Layout::layout): Likewise.
(Layout::layout_reloc): Create new output reloc section if data
section does not already have one.
(Layout::layout_eh_frame): Check for unwind section type.
(Layout::make_eh_frame_section): Use unwind section type for .eh_frame
and .eh_frame_hdr.
* object.h (Sized_relobj_file::Shdr_write): New typedef.
(Sized_relobj_file::layout_section): Add sh_type parameter.
(Sized_relobj_file::Deferred_layout::Deferred_layout): Add sh_type
parameter.
* object.cc (Sized_relobj_file::check_eh_frame_flags): Check for
unwind section type.
(Sized_relobj_file::layout_section): Add sh_type parameter; pass it
to Layout::layout.
(Sized_relobj_file::do_layout): Make local copy of sh_type.
Force .eh_frame sections to unwind section type.
Pass sh_type to layout_section.
(Sized_relobj_file<size, big_endian>::do_layout_deferred_sections):
Pass sh_type to layout_section.
* output.cc (Output_section::Output_section): Initialize reloc_section_.
* output.h (Output_section::reloc_section): New method.
(Output_section::set_reloc_section): New method.
(Output_section::reloc_section_): New data member.
* target.h (Target::unwind_section_type): New method.
(Target::Target_info::unwind_section_type): New data member.
* aarch64.cc (aarch64_info): Add unwind_section_type.
* arm.cc (arm_info, arm_nacl_info): Likewise.
* i386.cc (i386_info, i386_nacl_info, iamcu_info): Likewise.
* mips.cc (mips_info, mips_nacl_info): Likewise.
* powerpc.cc (powerpc_info): Likewise.
* s390.cc (s390_info): Likewise.
* sparc.cc (sparc_info): Likewise.
* tilegx.cc (tilegx_info): Likewise.
* x86_64.cc (x86_64_info, x86_64_nacl_info): Likewise.
* testsuite/Makefile.am (pr23016_1, pr23016_2): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/testfile.cc: Add unwind_section_type.
* testsuite/pr23016_1.sh: New test script.
* testsuite/pr23016_1a.s: New source file.
* testsuite/pr23016_1b.s: New source file.
* testsuite/pr23016_2.sh: New test script.
* testsuite/pr23016_2a.s: New source file.
* testsuite/pr23016_2b.s: New source file.
2018-03-28 Cary Coutant <ccoutant@gmail.com>
PR gold/21423
PR gold/22500
* configure.ac: Call AC_USE_SYSTEM_EXTENSIONS.
Replace check for --enable-plugins with AC_PLUGINS.
* options.cc (parse_plugin, parse_plugin_opt): Remove #ifdef.
(General_options::finalize): Check if plugins enabled.
* options.h (--plugin, --plugin-opt): Define even if plugins not
enabled.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.in: Regenerate.
2018-03-28 Cary Coutant <ccoutant@gmail.com>
PR gold/22969
* aarch64-reloc.def: Add TLSLE_LDST* relocations.
* aarch64.cc (Target_aarch64::optimize_tls_reloc): Likewise.
(Target_aarch64::Scan::local): Likewise.
(Target_aarch64::Scan::global): Likewise.
(Target_aarch64::Relocate::relocate): Likewise.
(Target_aarch64::Relocate::relocate_tls): Likewise.
2018-03-27 Roland McGrath <mcgrathr@google.com>
* testsuite/split_x86_64.sh: Fix bad regexp.
2018-03-26 Cary Coutant <ccoutant@gmail.com>
PR gold/22868
* plugin.cc (Sized_pluginobj::do_add_symbols): Use a real section
index instead of SHN_ABS for defined symbols.
* testsuite/Makefile.am (plugin_pr22868): New test case.
* testsuite/Makefile.in: Regenerate
* testsuite/plugin_pr22868.sh: New test script.
* testsuite/plugin_pr22868_a.c: New source file.
* testsuite/plugin_pr22868_b.c: New source file.
2018-03-23 Cary Coutant <ccoutant@gmail.com>
* plugin.cc (link_or_copy_file): Remove newlines from warning messages.
Add pedantic check for return value from ::write.
2018-03-23 Cary Coutant <ccoutant@gmail.com>
* debug.h (DEBUG_PLUGIN): New constant.
(DEBUG_ALL): Add DEBUG_PLUGIN.
(debug_string_to_enum): Likewise.
* plugin.cc (make_sized_plugin_object): Add filename parameter.
(Plugin_recorder): New class.
(Plugin_manager::~Plugin_manager): Delete recorder_.
(Plugin_manager::load_plugins): Create and initialize recorder_.
(Plugin_manager::claim_file): Record claimed and unclaimed files.
(Plugin_manager::make_plugin_object): Use object name as name for
plugin object, if available.
(Plugin_manager::add_input_file): Record replacement files.
(Sized_pluginobj::do_add_symbols): Record plugin symbols.
(Plugin_finish::run): Call Plugin_recorder::finish().
(make_sized_plugin_object): Add filename parameter and pass to
Sized_pluginobj constructor.
* plugin.h (Plugin::filename): New method.
(Plugin::recorder): New method.
(Plugin::recorder_): New data member.
2018-03-07 Sriraman Tallam <tmsriram@google.com>
* layout.cc (Layout::default_section_order): Check for text section
prefixes.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
(Layout::output_section_name): Check for text section prefixes.
* layout.h (Output_section_order::ORDER_TEXT_HOT): New enum value.
(Output_section_order::ORDER_TEXT_STARTUP): New enum value.
(Output_section_order::ORDER_TEXT_EXIT): New enum value.
(Output_section_order::ORDER_TEXT_UNLIKELY): New enum value.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
* options.h (keep_text_section_prefix): New -z option.
* testsuite/Makefile.am (keep_text_section_prefix): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/keep_text_section_prefix.cc: New test source.
* testsuite/keep_text_section_prefix.sh: New test script.
2018-02-22 Sriraman Tallam <tmsriram@google.com>
* plugin.cc (get_wrap_symbols): New plugin interface.
(load): Add get_wrap_symbols to transfer vector.
* plugin-api.h (ld_plugin_get_wrap_symbols): New plugin interface.
* testsuite/plugin_test.c (onload): Call and check get_wrap_symbols
interface.
* testsuite/plugin_test_wrap_symbols.sh: New test script.
* testsuite/plugin_test_wrap_symbols_1.cc: New file.
* testsuite/plugin_test_wrap_symbols_2.cc: New file.
* testsuite/Makefile.am (plugin_test_wrap_symbols): New test.
* testsuite/Makefile.in: Regenerate.
2018-02-07 Sriraman Tallam <tmsriram@google.com>
* expression.cc (Symbol_expression::set_expr_sym_in_real_elf):
New method.
(Unary_expression::set_expr_sym_in_real_elf): New method.
(Binary_expression::set_expr_sym_in_real_elf): New method.
(Trinary_expression::set_expr_sym_in_real_elf): New method.
* plugin.cc (get_symbol_resolution_info): Fix symbol resolution if
defined or used in defsyms.
* plugin.h (Plugin_manager::is_defsym_def): New method.
(Plugin_manager::Plugin_manager): Initialize defsym_defines_set_.
(Plugin_manager::defsym_defines_set_): New member.
(Plugin_manager::Defsym_defines_set): New typedef.
* script.cc (Script_options::set_defsym_uses_in_real_elf): New method.
(Script_options::find_defsym_defs): New method.
* script.h (Expression::set_expr_sym_in_real_elf): New method.
(Symbol_assignment::is_defsym): New method.
(Symbol_assignment::value): New method.
(Script_options::find_defsym_defs): New method.
(Script_options::set_defsym_uses_in_real_elf): New method.
* testsuite/Makefile.am (plugin_test_defsym): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test.c: Check for new symbol resolution.
* testsuite/plugin_test_defsym.sh: New script.
* testsuite/plugin_test_defsym.c: New test source.
2018-02-07 Alan Modra <amodra@gmail.com>
Revert 2018-01-17 Alan Modra <amodra@gmail.com>
* options.h: Remove --speculate-indirect-jumps support.
* powerpc.cc: Likewise.
2018-02-02 Cary Coutant <ccoutant@gmail.com>
* PR gold/22776
* dwarf_reader.cc (Sized_dwarf_line_info::read_header_prolog): Add
support for DWARF-4 line number tables.
* dwarf_reader.h (Sized_dwarf_line_info::max_ops_per_insn): New field.
2018-01-18 Alan Modra <amodra@gmail.com>
* powerpc.cc (param_plt_align): New function supplying default
--plt-align values. Use it..
(Stub_table::plt_call_align): ..here, and..
(Output_data_glink::global_entry_align): ..here.
(Stub_table::stub_align): Correct 32-bit minimum alignment.
2018-01-17 Alan Modra <amodra@gmail.com>
* options.h (speculate_indirect_jumps): New option.
* powerpc.cc (beqctrm, beqctrlm, crseteq): New insn constants.
(output_bctr): New function.
(Stub_table::plt_call_size): Add space for speculation barrier.
(Stub_table::branch_stub_size): Likewise.
(Output_data_glink::pltresolve_size): Likewise.
(Stub_table::do_write): Output speculation barriers.
2018-01-17 Alan Modra <amodra@gmail.com>
* options.h (plt_align): Support for PowerPC32 too.
* powerpc.cc (Stub_table::stub_align): Heed --plt-align for 32-bit.
(Stub_table::plt_call_size, branch_stub_size): Tidy.
(Stub_table::plt_call_align): Implement using stub_align.
(Output_data_glink::global_entry_align): New function.
(Output_data_glink::global_entry_off): New function.
(Output_data_glink::global_entry_address): Use global_entry_off.
(Output_data_glink::pltresolve_size): New function, replacing
pltresolve_size_ constant. Update all uses.
(Output_data_glink::add_global_entry): Align offset.
(Output_data_glink::set_final_data_size): Use global_entry_align.
(Stub_table::do_write): Don't pad __glink_PLTrelsolve with nops.
Tidy stub output. Use global_entry_off.
2018-01-15 Cary Coutant <ccoutant@gmail.com>
PR gold/22694
* options.h (-fuse-ld): Add correct helparg.
2018-01-15 Nick Clifton <nickc@redhat.com>
* po/uk.po: Updated Ukranian translation.
2018-01-13 Nick Clifton <nickc@redhat.com>
* po/gold.pot: Regenerated.
2018-01-13 Nick Clifton <nickc@redhat.com>
2.30 branch created.
2018-01-12 Cary Coutant <ccoutant@gmail.com>
* NEWS: Add new features in 1.15.
* version.cc (version_string): Bump to 1.15.
2018-01-12 Sterling Augustine <saugustine@google.com>
* cref.cc (Cref_inputs::Cref_table_compare::operator): Add
conditionals and calls to is_forwarder.
2018-01-03 Alan Modra <amodra@gmail.com>
Update year range in copyright notice of all files.
For older changes see ChangeLog-2017
Copyright (C) 2018 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End:
Reference in New Issue View Git Blame Copy Permalink