dnl Process this file with autoconf to produce a configure script. dnl dnl And be careful when changing it! If you must add tests with square dnl brackets, be sure changequote invocations surround it. dnl dnl dnl v2.5 needed for --bindir et al AC_PREREQ(2.13) AC_INIT(as.h) AC_CANONICAL_SYSTEM AC_ISC_POSIX changequote(,)dnl BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in` changequote([,])dnl AM_INIT_AUTOMAKE(gas, ${BFD_VERSION}) AM_PROG_LIBTOOL user_bfd_gas= AC_ARG_ENABLE(bfd-assembler, [ --enable-bfd-assembler use BFD back end for writing object files], [case "${enableval}" in yes) need_bfd=yes user_bfd_gas=yes ;; no) user_bfd_gas=no ;; *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;; esac])dnl AC_ARG_ENABLE(targets, [ targets alternative target configurations besides the primary], [case "${enableval}" in yes | "") AC_ERROR(enable-targets option must specify target names or 'all') ;; no) enable_targets= ;; *) enable_targets=$enableval ;; esac])dnl AC_ARG_ENABLE(commonbfdlib, [ --enable-commonbfdlib build shared BFD/opcodes/libiberty library], [case "${enableval}" in yes) commonbfdlib=true ;; no) commonbfdlib=false ;; *) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;; esac])dnl using_cgen=no build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes" AC_ARG_ENABLE(build-warnings, [ --enable-build-warnings Enable build-time compiler warnings if gcc is used], [case "${enableval}" in yes) ;; no) build_warnings="-w";; ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` build_warnings="${build_warnings} ${t}";; *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` build_warnings="${t} ${build_warnings}";; *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; esac if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then echo "Setting warning flags = $build_warnings" 6>&1 fi])dnl WARN_CFLAGS="" if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then WARN_CFLAGS="${build_warnings}" fi AC_SUBST(WARN_CFLAGS) # Generate a header file AM_CONFIG_HEADER(config.h:config.in) # If we are on a DOS filesystem, we must use gdb.ini rather than # .gdbinit. GDBINIT=".gdbinit" case "${host}" in *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*) GDBINIT="gdb.ini" ;; esac AC_SUBST(GDBINIT) te_file=generic # Makefile target for installing gas in $(tooldir)/bin. install_tooldir=install-exec-tooldir canon_targets="" all_targets=no if test -n "$enable_targets" ; then for t in `echo $enable_targets | sed 's/,/ /g'`; do if test $t = "all"; then all_targets=yes continue fi result=`$ac_config_sub $t 2>/dev/null` if test -n "$result" ; then canon_targets="$canon_targets $result" # else # # Permit "all", etc. We don't support it yet though. # canon_targets="$canon_targets $t" fi done GAS_UNIQ(canon_targets) fi emulations="" for this_target in $target $canon_targets ; do changequote(,)dnl eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'` changequote([,])dnl # check for architecture variants arch= endian= case ${cpu} in alpha*) cpu_type=alpha ;; armeb) cpu_type=arm endian=big ;; arm*) cpu_type=arm endian=little ;; armb*) cpu_type=arm endian=little ;; armv*l) cpu_type=arm endian=little ;; armv*b) cpu_type=arm endian=big ;; xscale*) cpu_type=arm endian=little ;; strongarm*) cpu_type=arm endian=little ;; thumb*) cpu_type=arm endian=little ;; hppa*) cpu_type=hppa ;; changequote(,)dnl i[3456]86) cpu_type=i386 arch=i386;; x86_64) cpu_type=i386 arch=x86_64;; ia64) cpu_type=ia64 ;; m6811|m6812|m68hc12) cpu_type=m68hc11 ;; m680[012346]0) cpu_type=m68k ;; changequote([,])dnl m68008) cpu_type=m68k ;; m683??) cpu_type=m68k ;; m5200) cpu_type=m68k ;; m8*) cpu_type=m88k ;; mips*el) cpu_type=mips endian=little ;; mips*) cpu_type=mips endian=big ;; pjl*) cpu_type=pj endian=little ;; pj*) cpu_type=pj endian=big ;; powerpc*le*) cpu_type=ppc endian=little ;; powerpc*) cpu_type=ppc endian=big ;; rs6000*) cpu_type=ppc ;; s390x*) cpu_type=s390 arch=s390x ;; s390*) cpu_type=s390 arch=s390 ;; sh*le) cpu_type=sh endian=little ;; sh*) cpu_type=sh endian=big ;; sparclite*) cpu_type=sparc arch=sparclite ;; sparclet*) cpu_type=sparc arch=sparclet ;; sparc64*) cpu_type=sparc arch=v9-64 ;; sparc86x*) cpu_type=sparc arch=sparc86x ;; sparc*) cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c. v850*) cpu_type=v850 ;; *) cpu_type=${cpu} ;; esac if test ${this_target} = $target ; then target_cpu_type=${cpu_type} elif test ${target_cpu_type} != ${cpu_type} ; then continue fi generic_target=${cpu_type}-$vendor-$os dev=no bfd_gas=no em=generic mips_stabs_elf= # assign object format case ${generic_target} in a29k-*-coff) fmt=coff ;; a29k-amd-udi) fmt=coff ;; a29k-amd-ebmon) fmt=coff ;; a29k-nyu-sym1) fmt=coff ;; a29k-*-rtems*) fmt=coff ;; a29k-*-vxworks*) fmt=coff ;; alpha*-*-*vms*) fmt=evax ;; alpha*-*-netware*) fmt=ecoff ;; alpha*-*-openbsd*) fmt=ecoff ;; alpha*-*-osf*) fmt=ecoff ;; alpha*-*-linuxecoff*) fmt=ecoff ;; alpha*-*-linux-gnu*) fmt=elf em=linux ;; alpha*-*-netbsd*) fmt=elf em=nbsd ;; arc-*-elf*) fmt=elf bfd_gas=yes ;; arm-*-aout) fmt=aout ;; arm-*-coff | thumb-*-coff) fmt=coff ;; arm-*-rtems | thumb-*-rtems) fmt=elf ;; arm-*-elf | thumb-*-elf) fmt=elf ;; arm*-*-conix*) fmt=elf ;; arm-*-linux*aout*) fmt=aout em=linux ;; arm*-*-linux-gnu* | arm*-*-uclinux*) fmt=elf em=linux ;; arm-*-netbsdelf*) fmt=elf em=nbsd ;; arm-*-netbsd* | arm-*-openbsd*) fmt=aout em=nbsd ;; arm-*-oabi | thumb-*-oabi) fmt=elf ;; arm-epoc-pe | thumb-epoc-pe) fmt=coff em=epoc-pe ;; arm-*-wince) fmt=coff em=wince-pe ;; arm-*-pe | thumb-*-pe) fmt=coff em=pe ;; arm-*-riscix*) fmt=aout em=riscix ;; arm-*-vxworks) fmt=coff ;; avr-*-*) fmt=elf bfd_gas=yes ;; cris-*-*) fmt=multi bfd_gas=yes ;; d10v-*-*) fmt=elf bfd_gas=yes ;; d30v-*-*) fmt=elf bfd_gas=yes ;; fr30-*-*) fmt=elf bfd_gas=yes ;; hppa-*-linux-gnu*) case ${cpu} in hppa*64*) fmt=elf em=hppalinux64;; hppa*) fmt=elf em=linux;; esac ;; hppa-*-*elf*) fmt=elf em=hppa ;; hppa-*-lites*) fmt=elf em=hppa ;; hppa-*-osf*) fmt=som em=hppa ;; hppa-*-rtems*) fmt=elf em=hppa ;; hppa-*-hpux11*) case ${cpu} in hppa*64*) fmt=elf em=hppa64 ;; hppa*) fmt=som em=hppa ;; esac ;; hppa-*-hpux*) fmt=som em=hppa ;; hppa-*-mpeix*) fmt=som em=hppa ;; hppa-*-bsd*) fmt=som em=hppa ;; hppa-*-hiux*) fmt=som em=hppa ;; h8300-*-rtems*) fmt=coff ;; h8300-*-coff) fmt=coff ;; h8300-*-elf) fmt=elf ;; h8500-*-rtems*) fmt=coff ;; h8500-*-coff) fmt=coff ;; i370-*-elf* | i370-*-linux*) fmt=elf ;; i386-ibm-aix*) fmt=coff em=i386aix ;; i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;; i386-*-beospe*) fmt=coff em=pe bfd_gas=yes ;; i386-*-beoself* | i386-*-beos*) fmt=elf bfd_gas=yes ;; i386-*-bsd*) fmt=aout em=386bsd ;; i386-*-netbsd0.8) fmt=aout em=386bsd ;; i386-*-netbsd*) em=nbsd bfd_gas=yes case ${cpu} in x86_64) fmt=elf ;; *) case ${os} in *elf*) fmt=elf ;; *) fmt=aout ;; esac ;; esac ;; i386-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes;; i386-*-linux*aout* | i386-*-linux*oldld) fmt=aout em=linux ;; i386-*-linux*coff*) fmt=coff em=linux ;; i386-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;; x86_64-*-linux-gnu*) fmt=elf em=linux bfd_gas=yes ;; i386-*-lynxos*) fmt=coff em=lynx ;; changequote(,)dnl i386-*-sysv[45]* | i386-*-solaris* | i386-*-elf) fmt=elf bfd_gas=yes ;; i386-*-freebsdaout* | i386-*-freebsd[12].* | i386-*-freebsd[12]) fmt=aout em=386bsd ;; changequote([,])dnl i386-*-coff | i386-*-sysv* | i386-*-sco3.2v5*coff | i386-*-isc*) fmt=coff ;; i386-*-sco3.2v5*) fmt=elf if test ${this_target} = $target; then AC_DEFINE(SCO_ELF, 1, [Define if defaulting to ELF on SCO 5.]) fi ;; i386-*-sco3.2*) fmt=coff ;; i386-*-vsta) fmt=aout ;; i386-*-msdosdjgpp* | i386-*-go32* | i386-go32-rtems*) fmt=coff em=go32 bfd_gas=yes AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?]) ;; i386-*-rtemself*) fmt=elf ;; i386-*-rtemscoff*) fmt=coff ;; i386-*-rtems*) fmt=elf ;; i386-*-gnu*) fmt=elf ;; i386-*-mach*) fmt=aout em=mach bfd_gas=yes ;; i386-*-msdos*) fmt=aout ;; i386-*-moss*) fmt=elf ;; i386-*-pe) fmt=coff em=pe bfd_gas=yes ;; i386-*-cygwin*) fmt=coff em=pe bfd_gas=yes ;; i386-*-interix*) fmt=coff em=interix bfd_gas=yes ;; i386-*-mingw32*) fmt=coff em=pe bfd_gas=yes ;; i386-*-*nt*) fmt=coff em=pe bfd_gas=yes ;; i386-*-vxworks*) fmt=aout ;; i386-*-chaos) fmt=elf ;; i860-stardent-sysv4* | i860-stardent-elf*) fmt=elf bfd_gas=yes endian=little AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress) ;; i960-*-bout) fmt=bout ;; i960-*-coff) fmt=coff em=ic960 ;; i960-*-rtems*) fmt=coff em=ic960 ;; i960-*-nindy*) fmt=bout ;; i960-*-vxworks4*) fmt=bout ;; i960-*-vxworks5.0) fmt=bout ;; i960-*-vxworks5.*) fmt=coff em=ic960 ;; i960-*-vxworks*) fmt=bout ;; i960-*-elf*) fmt=elf ;; ia64-*-elf*) fmt=elf ;; ia64-*-aix*) fmt=elf em=ia64aix ;; ia64-*-linux-gnu*) fmt=elf em=linux ;; ia64-*-hpux*) fmt=elf em=hpux ;; m32r-*-*) fmt=elf bfd_gas=yes ;; m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)fmt=elf bfd_gas=yes ;; m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*) fmt=aout em=sun3 ;; m68k-motorola-sysv*) fmt=coff em=delta ;; m68k-bull-sysv3*) fmt=coff em=dpx2 ;; m68k-apollo-*) fmt=coff em=apollo ;; m68k-*-sysv4*) # must be before -sysv* fmt=elf em=svr4 ;; m68k-*-elf*) fmt=elf ;; m68k-*-coff | m68k-*-sysv* | m68k-*-rtemscoff*) fmt=coff ;; m68k-*-rtems*) fmt=elf ;; m68k-*-hpux*) fmt=hp300 em=hp300 ;; m68k-*-linux*aout*) fmt=aout em=linux ;; m68k-*-linux-gnu*) fmt=elf em=linux ;; m68k-*-gnu*) fmt=elf ;; m68k-*-lynxos*) fmt=coff em=lynx ;; m68k-*-netbsdelf*) fmt=elf em=nbsd bfd_gas=yes ;; m68k-*-netbsdaout* | m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;; m68k-*-openbsd*) fmt=aout em=nbsd bfd_gas=yes ;; m68k-apple-aux*) fmt=coff em=aux ;; m68k-*-psos*) fmt=elf em=psos;; m88k-motorola-sysv3*) fmt=coff em=delt88 ;; m88k-*-coff*) fmt=coff ;; mcore-*-elf) fmt=elf bfd_gas=yes ;; mcore-*-pe) fmt=coff em=pe bfd_gas=yes ;; # don't change em like *-*-bsd does mips-dec-openbsd*) fmt=elf endian=little ;; mips-dec-bsd*) fmt=aout endian=little ;; mips-sony-bsd*) fmt=ecoff ;; mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;; mips-*-ultrix*) fmt=ecoff endian=little ;; mips-*-osf*) fmt=ecoff endian=little ;; mips-*-ecoff*) fmt=ecoff ;; mips-*-pe*) fmt=coff endian=little em=pe ;; mips-*-irix6*) fmt=elf ;; mips-*-irix5*) fmt=elf ;; mips-*-irix*) fmt=ecoff ;; mips-*-lnews*) fmt=ecoff em=lnews ;; mips-*-riscos*) fmt=ecoff ;; mips*-*-linux*) fmt=elf em=tmips mips_stabs_elf=y ;; mips-*-sysv4*MP* | mips-*-gnu*) fmt=elf em=tmips ;; mips-*-sysv*) fmt=ecoff ;; mips-*-elf* | mips-*-rtems* | mips-*-netbsd* | mips-*-openbsd*) fmt=elf ;; mips-*-vxworks*) fmt=elf mips_stabs_elf=y ;; mmix-*-*) fmt=elf bfd_gas=yes ;; mn10200-*-*) fmt=elf bfd_gas=yes ;; mn10300-*-*) fmt=elf bfd_gas=yes ;; openrisc-*-*) fmt=elf bfd_gas=yes ;; pj*) fmt=elf ;; ppc-*-pe | ppc-*-cygwin* | ppc-*-winnt*) fmt=coff em=pe ;; ppc-*-aix*) fmt=coff ;; ppc-*-beos*) fmt=coff ;; ppc-*-*bsd* | ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*) fmt=elf ;; ppc-*-linux-gnu*) fmt=elf case "$endian" in big) ;; *) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;; esac ;; ppc-*-solaris*) fmt=elf if test ${this_target} = $target; then AC_DEFINE(TARGET_SOLARIS_COMMENT, 1, [Define if default target is PowerPC Solaris.]) fi if test x${endian} = xbig; then AC_MSG_ERROR(Solaris must be configured little endian) fi ;; ppc-*-rtems*) fmt=elf ;; ppc-*-macos* | ppc-*-mpw*) fmt=coff em=macos ;; ppc-*-netware*) fmt=elf em=ppcnw ;; ppc-*-vxworks*) fmt=elf ;; s390x-*-linux-gnu*) fmt=elf em=linux ;; s390-*-linux-gnu*) fmt=elf em=linux ;; sh*-*-linux*) fmt=elf em=linux case ${cpu} in sh*eb) endian=big ;; sh*) endian=little ;; esac ;; sh*-*-netbsdelf*) fmt=elf em=nbsd ;; sh-*-elf*) fmt=elf ;; sh-*-coff*) fmt=coff bfd_gas=yes;; sh-*-pe*) fmt=coff em=pe bfd_gas=yes endian=little ;; sh-*-rtemself*) fmt=elf ;; sh-*-rtems*) fmt=coff bfd_gas=yes;; ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;; ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;; ns32k-pc532-openbsd*) fmt=aout em=nbsd532 ;; sparc-*-rtemsaout*) fmt=aout ;; sparc-*-rtemself*) fmt=elf ;; sparc-*-rtems*) fmt=elf ;; sparc-*-sunos4*) fmt=aout em=sun3 ;; sparc-*-aout | sparc*-*-vxworks*) fmt=aout em=sparcaout ;; sparc-*-coff) fmt=coff ;; sparc-*-linux*aout*) fmt=aout em=linux ;; sparc-*-linux-gnu*) fmt=elf em=linux ;; sparc-*-lynxos*) fmt=coff em=lynx ;; sparc-fujitsu-none) fmt=aout ;; sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*) fmt=elf ;; sparc-*-netbsd*) em=nbsd bfd_gas=yes case ${cpu} in sparc) case ${os} in *elf*) fmt=elf ;; *) fmt=aout ;; esac ;; sparc64) fmt=elf ;; esac ;; sparc-*-openbsd*) fmt=aout em=nbsd ;; strongarm-*-coff) fmt=coff ;; strongarm-*-elf) fmt=elf ;; xscale-*-coff) fmt=coff ;; xscale-*-elf) fmt=elf ;; tic30-*-*aout*) fmt=aout bfd_gas=yes ;; tic30-*-*coff*) fmt=coff bfd_gas=yes ;; tic54x-*-* | c54x*-*-*) fmt=coff bfd_gas=yes need_libm=yes;; tic80-*-*) fmt=coff ;; v850-*-*) fmt=elf bfd_gas=yes ;; v850e-*-*) fmt=elf bfd_gas=yes ;; v850ea-*-*) fmt=elf bfd_gas=yes ;; vax-*-bsd* | vax-*-ultrix*) fmt=aout ;; vax-*-vms) fmt=vms ;; w65-*-*) fmt=coff ;; xstormy16-*-*) fmt=elf bfd_gas=yes ;; z8k-*-coff | z8k-*-sim) fmt=coff ;; *-*-aout | *-*-scout) fmt=aout ;; *-*-freebsd*) fmt=elf em=freebsd bfd_gas=yes ;; *-*-nindy*) fmt=bout ;; *-*-bsd*) fmt=aout em=sun3 ;; *-*-generic) fmt=generic ;; *-*-xray | *-*-hms) fmt=coff ;; *-*-sim) fmt=coff ;; *-*-elf | *-*-sysv4* | *-*-solaris*) AC_MSG_WARN(GAS support for ${generic_target} is incomplete.) fmt=elf dev=yes ;; *-*-vxworks) fmt=aout ;; *-*-netware) fmt=elf ;; esac if test ${this_target} = $target ; then endian_def= if test x${endian} = xbig; then endian_def=1 elif test x${endian} = xlittle; then endian_def=0 fi if test x${endian_def} != x; then AC_DEFINE_UNQUOTED(TARGET_BYTES_BIG_ENDIAN, $endian_def, [Define as 1 if big endian.]) fi fi if test x${mips_stabs_elf} != x; then AC_DEFINE(MIPS_STABS_ELF, 1, [Use ELF stabs for MIPS, not ECOFF stabs]) fi case ${cpu_type}-${fmt} in alpha*-*) bfd_gas=yes ;; arm-*) bfd_gas=yes ;; # not yet # i386-aout) bfd_gas=preferred ;; ia64*-*) bfd_gas=yes ;; mips-*) bfd_gas=yes ;; ns32k-*) bfd_gas=yes ;; pdp11-*) bfd_gas=yes ;; ppc-*) bfd_gas=yes ;; sparc-*) bfd_gas=yes ;; strongarm-*) bfd_gas=yes ;; xscale-*) bfd_gas=yes ;; *-elf) bfd_gas=yes ;; *-ecoff) bfd_gas=yes ;; *-som) bfd_gas=yes ;; #enable bfd for coff and aout to allow testing if a bfd target is #the primary target, but not for coff or aout as the primary target i386-coff) if test x${primary_bfd_gas} = xyes; then bfd_gas=yes; fi ;; i386-aout) if test x${primary_bfd_gas} = xyes; then bfd_gas=yes; fi ;; *) ;; esac # Other random stuff. # Do we need the opcodes library? case ${cpu_type} in vax | i386 | tic30) ;; *) need_opcodes=yes case "${enable_shared}" in yes) shared_opcodes=true ;; *opcodes*) shared_opcodes=true ;; *) shared_opcodes=false ;; esac if test "${shared_opcodes}" = "true"; then # A shared libopcodes must be linked against libbfd. need_bfd=yes fi ;; esac # Any other special object files needed ? case ${cpu_type} in fr30 | m32r | openrisc) using_cgen=yes ;; m68k) case ${extra_objects} in *m68k-parse.o*) ;; *) extra_objects="$extra_objects m68k-parse.o" ;; esac ;; mips) echo ${extra_objects} | grep -s "itbl-parse.o" if test $? -ne 0 ; then extra_objects="$extra_objects itbl-parse.o" fi echo ${extra_objects} | grep -s "itbl-lex.o" if test $? -ne 0 ; then extra_objects="$extra_objects itbl-lex.o" fi echo ${extra_objects} | grep -s "itbl-ops.o" if test $? -ne 0 ; then extra_objects="$extra_objects itbl-ops.o" fi ;; i386 | s390 | sparc) if test $this_target = $target ; then AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.]) fi ;; xstormy16) using_cgen=yes ;; *) ;; esac if test $using_cgen = yes ; then case "x${extra_objects}" in *cgen.o*) ;; *) extra_objects="$extra_objects cgen.o" ;; esac fi # See if we really can support this configuration with the emulation code. if test $this_target = $target ; then primary_bfd_gas=$bfd_gas obj_format=$fmt te_file=$em if test $bfd_gas = no ; then # Can't support other configurations this way. break fi elif test $bfd_gas = no ; then # Can't support this configuration. break fi # From target name and format, produce a list of supported emulations. case ${generic_target}-${fmt} in mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;; mips*-*-linux*-*) case "$endian" in big) emulation="mipsbelf mipslelf mipself" ;; *) emulation="mipslelf mipsbelf mipself" ;; esac ;; mips-*-lnews*-ecoff) ;; mips-*-*-ecoff) case "$endian" in big) emulation="mipsbecoff mipslecoff mipsecoff" ;; *) emulation="mipslecoff mipsbecoff mipsecoff" ;; esac ;; mips-*-*-elf) case "$endian" in big) emulation="mipsbelf mipslelf mipself" ;; *) emulation="mipslelf mipsbelf mipself" ;; esac ;; mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;; # i386-pc-pe-coff != i386-pc-coff. i386-*-pe-coff) ;; # Uncommenting the next line will turn on support for i386 AOUT # for the default linux configuration # i386-*-linux*-elf) emulation="i386elf i386aout" ;; # i386-*-aout) emulation="i386aout" ;; i386-*-coff) emulation="i386coff" ;; i386-*-elf) emulation="i386elf" ;; # Always all formats. The first stated emulation becomes the default. cris-*-*aout*) emulation="crisaout criself" ;; cris-*-*) emulation="criself crisaout" ;; esac emulations="$emulations $emulation" done # Turn on all targets if possible if test ${all_targets} = "yes"; then case ${target_cpu_type} in i386) case ${obj_format} in aout) emulations="$emulations i386coff i386elf" ;; coff) emulations="$emulations i386aout i386elf" ;; elf) emulations="$emulations i386aout i386coff" ;; esac ;; esac fi # Assign floating point type. Most processors with FP support # IEEE FP. On those that don't support FP at all, usually IEEE # is emulated. case ${target_cpu} in vax | tahoe ) atof=${target_cpu} ;; pdp11) atof=vax ;; *) atof=ieee ;; esac case "${obj_format}" in "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;; esac # Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU). cgen_cpu_prefix="" if test $using_cgen = yes ; then case ${target_cpu} in *) cgen_cpu_prefix=${target_cpu} ;; esac AC_SUBST(cgen_cpu_prefix) AC_DEFINE(USING_CGEN, 1, [Using cgen code?]) fi dnl dnl Make sure the desired support files exist. dnl if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type}) fi if test ! -r ${srcdir}/config/obj-${obj_format}.c; then AC_MSG_ERROR(GAS does not have support for object file format ${obj_format}) fi case ${user_bfd_gas}-${primary_bfd_gas} in yes-yes | no-no) # We didn't override user's choice. ;; no-yes) AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.) ;; no-preferred) primary_bfd_gas=no ;; *-preferred) primary_bfd_gas=yes ;; yes-*) primary_bfd_gas=yes ;; -*) # User specified nothing. ;; esac # Some COFF configurations want these random other flags set. case ${obj_format} in coff) case ${target_cpu_type} in i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;; m68k) AC_DEFINE(M68KCOFF, 1, [Using m68k COFF?]) ;; m88k) AC_DEFINE(M88KCOFF, 1, [Using m88k COFF?]) ;; esac ;; esac # Getting this done right is going to be a bitch. Each configuration specified # with --enable-targets=... should be checked for environment, format, cpu, and # bfd_gas setting. # # For each configuration, the necessary object file support code must be linked # in. This might be only one, it might be up to four. The necessary emulation # code needs to be provided, too. # # And then there's "--enable-targets=all".... # # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh. formats="${obj_format}" emfiles="" EMULATIONS="" GAS_UNIQ(emulations) for em in . $emulations ; do case $em in .) continue ;; mipsbelf | mipslelf | mipself) fmt=elf file=mipself ;; mipsbecoff | mipslecoff | mipsecoff) fmt=ecoff file=mipsecoff ;; *coff) fmt=coff file=$em ;; *aout) fmt=aout file=$em ;; *elf) fmt=elf file=$em ;; esac formats="$formats $fmt" emfiles="$emfiles e-$file.o" EMULATIONS="$EMULATIONS &$em," done GAS_UNIQ(formats) GAS_UNIQ(emfiles) if test `set . $formats ; shift ; echo $#` -gt 1 ; then for fmt in $formats ; do case $fmt in aout) AC_DEFINE(OBJ_MAYBE_AOUT, 1, [a.out support?]) ;; bout) AC_DEFINE(OBJ_MAYBE_BOUT, 1, [b.out support?]) ;; coff) AC_DEFINE(OBJ_MAYBE_COFF, 1, [COFF support?]) ;; ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF, 1, [ECOFF support?]) ;; elf) AC_DEFINE(OBJ_MAYBE_ELF, 1, [ELF support?]) ;; generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;; hp300) AC_DEFINE(OBJ_MAYBE_HP300, 1, [HP300 support?]) ;; ieee) AC_DEFINE(OBJ_MAYBE_IEEE, 1, [IEEE support?]) ;; som) AC_DEFINE(OBJ_MAYBE_SOM, 1, [SOM support?]) ;; vms) AC_DEFINE(OBJ_MAYBE_VMS, 1, [VMS support?]) ;; esac extra_objects="$extra_objects obj-$fmt.o" done obj_format=multi fi if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then DEFAULT_EMULATION=`set . $emulations ; echo $2` # e-mips* has more than one emulation per file, e-i386* has just one at the # moment. If only one emulation is specified, then don't define # USE_EMULATIONS or include any of the e-files as they will only be bloat. case "${obj_format}${emfiles}" in multi* | *mips*) extra_objects="$extra_objects $emfiles" AC_DEFINE(USE_EMULATIONS, 1, [Use emulation support?]) ;; esac fi AC_SUBST(extra_objects) AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS, [Supported emulations.]) AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION", [Default emulation.]) case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in yes-*-coff) need_bfd=yes ;; no-*-coff) need_bfd=yes AC_DEFINE(MANY_SEGMENTS, 1, [old COFF support?]) ;; esac reject_dev_configs=yes case ${reject_dev_configs}-${dev} in yes-yes) # Oops. AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.) ;; esac AC_SUBST(target_cpu_type) AC_SUBST(obj_format) AC_SUBST(te_file) AC_SUBST(install_tooldir) AC_SUBST(atof) dnl AC_SUBST(emulation) case "${primary_bfd_gas}" in yes) AC_DEFINE(BFD_ASSEMBLER, 1, [Use BFD interface?]) need_bfd=yes ;; esac # do we need the opcodes library? case "${need_opcodes}" in yes) OPCODES_LIB=../opcodes/libopcodes.la ;; esac case "${need_bfd}" in yes) BFDLIB=../bfd/libbfd.la ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h" ;; esac AC_SUBST(BFDLIB) AC_SUBST(OPCODES_LIB) AC_SUBST(ALL_OBJ_DEPS) AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}", [Target alias.]) AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}", [Canonical target.]) AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}", [Target CPU.]) AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}", [Target vendor.]) AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}", [Target OS.]) AC_PROG_CC AC_PROG_YACC AM_PROG_LEX ALL_LINGUAS="fr" CY_GNU_GETTEXT AM_MAINTAINER_MODE AC_EXEEXT AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h) # Put this here so that autoconf's "cross-compiling" message doesn't confuse # people who are not cross-compiling but are compiling cross-assemblers. AC_MSG_CHECKING(whether compiling a cross-assembler) if test "${host}" = "${target}"; then cross_gas=no else cross_gas=yes AC_DEFINE(CROSS_COMPILE, 1, [Compiling cross-assembler?]) fi AC_MSG_RESULT($cross_gas) dnl ansidecl.h will deal with const dnl AC_CONST AC_FUNC_ALLOCA AC_C_INLINE # VMS doesn't have unlink. AC_CHECK_FUNCS(unlink remove, break) # Some systems don't have sbrk(). AC_CHECK_FUNCS(sbrk) # do we need the math library? case "${need_libm}" in yes) AC_CHECK_LIBM AC_SUBST(LIBM) ;; esac # Some non-ANSI preprocessors botch requoting inside strings. That's bad # enough, but on some of those systems, the assert macro relies on requoting # working properly! GAS_WORKING_ASSERT # On some systems, the system header files may not declare malloc, realloc, # and free. There are places where gas needs these functions to have been # declared -- such as when taking their addresses. gas_test_headers=" #ifdef HAVE_MEMORY_H #include #endif #ifdef HAVE_STRING_H #include #else #ifdef HAVE_STRINGS_H #include #endif #endif #ifdef HAVE_STDLIB_H #include #endif #ifdef HAVE_UNISTD_H #include #endif " GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers) GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers) GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers) GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers) GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers) # Does errno.h declare errno, or do we have to add a separate declaration # for it? GAS_CHECK_DECL_NEEDED(errno, f, int f, [ #ifdef HAVE_ERRNO_H #include #endif ]) dnl This must come last. dnl We used to make symlinks to files in the source directory, but now dnl we just use the right name for .c files, and create .h files in dnl the build directory which include the right .h file. Make sure dnl the old symlinks don't exist, so that a reconfigure in an existing dnl directory behaves reasonably. AC_OUTPUT(Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in, [rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h echo '#include "te-'"${te_file}"'.h"' > targ-env.h echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h if test "x$cgen_cpu_prefix" != x ; then echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h fi sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile], [target_cpu_type=${target_cpu_type} cgen_cpu_prefix=${cgen_cpu_prefix} obj_format=${obj_format} te_file=${te_file}])