cat << EOF
OUTPUT_FORMAT("elf32-v850-rh850", "elf32-v850-rh850",
	      "elf32-v850-rh850")
OUTPUT_ARCH(v850-rh850)
${RELOCATING+ENTRY(_start)}
SEARCH_DIR(.);
EXTERN(__ctbp __ep __gp);
SECTIONS
{
  /* This saves a little space in the ELF file, since the zda starts
     at a higher location that the ELF headers take up.  */

  .zdata ${ZDATA_START_ADDR} :
  {
	*(.zdata)
	*(.zdata23)
	*(.zbss)
	*(.zbss23)
	*(reszdata)
	*(.zcommon)
  }

  /* This is the read only part of the zero data area.
     Having it as a seperate section prevents its
     attributes from being inherited by the zdata
     section.  Specifically it prevents the zdata
     section from being marked READONLY.  */

  .rozdata ${ROZDATA_START_ADDR} :
  {
	*(.rozdata)
	*(romzdata)
	*(romzbss)
	*(.zconst)
	*(.zconst23)
  }

  /* Read-only sections, merged into text segment.  */
  . = ${TEXT_START_ADDR};
  .interp	: { *(.interp) }
  .hash		: { *(.hash) }
  .dynsym	: { *(.dynsym) }
  .dynstr	: { *(.dynstr) }
  .rel.text	: { *(.rel.text) }
  .rela.text	: { *(.rela.text) }
  .rel.data	: { *(.rel.data) }
  .rela.data	: { *(.rela.data) }
  .rel.rodata	: { *(.rel.rodata) }
  .rela.rodata	: { *(.rela.rodata) }
  .rel.gcc_except_table : { *(.rel.gcc_except_table) }
  .rela.gcc_except_table : { *(.rela.gcc_except_table) }
  .rel.got	: { *(.rel.got) }
  .rela.got	: { *(.rela.got) }
  .rel.ctors	: { *(.rel.ctors) }
  .rela.ctors	: { *(.rela.ctors) }
  .rel.dtors	: { *(.rel.dtors) }
  .rela.dtors	: { *(.rela.dtors) }
  .rel.init	: { *(.rel.init) }
  .rela.init	: { *(.rela.init) }
  .rel.fini	: { *(.rel.fini) }
  .rela.fini	: { *(.rela.fini) }
  .rel.bss	: { *(.rel.bss) }
  .rela.bss	: { *(.rela.bss) }
  .rel.plt	: { *(.rel.plt) }
  .rela.plt	: { *(.rela.plt) }
  .init		: { KEEP (*(.init)) } =0
  .plt		: { *(.plt) }

  .text		:
  {
    *(.text)
    ${RELOCATING+*(.text.*)}
    
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
    *(.gnu.linkonce.t*)
  } =0

  ${RELOCATING+_etext = .;}
  ${RELOCATING+PROVIDE (etext = .);}

   /* This is special code area at the end of the normal text section.
      It contains a small lookup table at the start followed by the
      code pointed to by entries in the lookup table.  */

  .call_table_data ${CALL_TABLE_START_ADDR} :
  {
    ${RELOCATING+PROVIDE(__ctbp = .);}
    *(.call_table_data)
  } = 0xff   /* Fill gaps with 0xff.  */
  
  .call_table_text :
  {
    *(.call_table_text)
  }

  .fini		: { KEEP (*(.fini)) } =0
  .rodata	:
  {
	*(.rodata)
	${RELOCATING+*(.rodata.*)}
	*(.gnu.linkonce.r*)
	*(.const)
  }
  .rodata1	: { *(.rodata1) }

  .data		:
  {
    *(.data)
    ${RELOCATING+*(.data.*)}
    *(.gnu.linkonce.d*)
    CONSTRUCTORS
  }
  .data1	: { *(.data1) }
  .ctors	:
  {
    ${CONSTRUCTING+___ctors = .;}
    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*crtend(.ctors))
    ${CONSTRUCTING+___ctors_end = .;}
  }
  .dtors	:
  {
    ${CONSTRUCTING+___dtors = .;}
    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*crtend.o(.dtors))
    ${CONSTRUCTING+___dtors_end = .;}
  }
  .jcr		:
  {
    KEEP (*(.jcr))
  }

  .gcc_except_table : { *(.gcc_except_table) }

  .got		: { *(.got.plt) *(.got) }
  .dynamic	: { *(.dynamic) }

  .tdata ${TDATA_START_ADDR} :
  {
	${RELOCATING+PROVIDE (__ep = .);}
	*(.edata)
	*(.edata23)
	*(.tbyte)
	*(.tcommon_byte)
	*(.tdata)
	*(.tdata*)
	*(.ebss)
	*(.ebss23)
	*(.tbss)
	*(.tbss*)
	*(.tcommon)
  }

  /* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
     
  .sdata ${SDATA_START_ADDR} :
  {
	${RELOCATING+PROVIDE (__gp = . + 0x8000);}
	*(.sdata)
	*(.sdata23)
   }

  /* See comment about .rozdata. */
  .rosdata ${ROSDATA_START_ADDR} :
  {
	*(.rosdata)
	*(.sconst)
	*(.sconst23)
  }

  /* We place the .sbss data section AFTER the .rosdata section, so that
     it can directly preceed the .bss section.  This allows runtime startup
     code to initialise all the zero-data sections by simply taking the
     value of '_edata' and zeroing until it reaches '_end'.  */
     
  .sbss :
  {
	${RELOCATING+__sbss_start = .;}
	*(.sbss)
	*(.sbss23)
	*(.scommon)
  }

  ${RELOCATING+_edata  = DEFINED (__sbss_start) ? __sbss_start : . ;}
  ${RELOCATING+PROVIDE (edata = _edata);}

  .bss       :
  {
	${RELOCATING+__bss_start = DEFINED (__sbss_start) ? __sbss_start : . ;}
	${RELOCATING+__real_bss_start = . ;}
	*(.dynbss)
	*(.bss)
	*(COMMON)
  }

  ${RELOCATING+_end = . ;}
  ${RELOCATING+PROVIDE (end = .);}
  ${RELOCATING+PROVIDE (_heap_start = .);}

  /* Stabs debugging sections.  */
  .stab 0		: { *(.stab) }
  .stabstr 0		: { *(.stabstr) }
  .stab.excl 0		: { *(.stab.excl) }
  .stab.exclstr 0	: { *(.stab.exclstr) }
  .stab.index 0		: { *(.stab.index) }
  .stab.indexstr 0	: { *(.stab.indexstr) }
  .comment 0		: { *(.comment) }

EOF

. $srcdir/scripttempl/DWARF.sc

cat <<EOF
  /* User stack.  */
  .stack 0x200000	:
  {
	${RELOCATING+__stack = .;}
	*(.stack)
  }
}
EOF