2015-06-02 Matthew Wahab * aarch64-tbl.h (aarch64_feature_rdma): New. (RDMA): New. (aarch64_opcode_table): Add "sqrmlah" and "sqrdmlsh" instructions. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. 2015-06-02 Matthew Wahab * aarch64-tbl.h (aarch64_feature_lor): New. (LOR): New. (aarch64_opdocde_table): Add "ldlar", "ldlarb", "ldlarh", "stllr", "stllrb", "stllrh". * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. 2015-06-01 Matthew Wahab * aarch64-opc.c (F_ARCHEXT): New. (aarch64_sys_regs): Add "pan". (aarch64_sys_reg_supported_p): New. (aarch64_pstatefields): Add "pan". (aarch64_pstatefield_supported_p): New. 2015-06-01 Jan Beulich * i386-tbl.h: Regenerate. 2015-06-01 Jan Beulich * i386-dis.c (print_insn): Swap rounding mode specifier and general purpose register in Intel mode. 2015-06-01 Jan Beulich * i386-opc.tbl: New IntelSyntax entries for vcvt{,u}si2s{d,s}. * i386-tbl.h: Regenerate. 2015-05-18 H.J. Lu * i386-opc.tbl: Remove Disp32 from AMD64 direct call/jmp. * i386-init.h: Regenerated. 2015-05-15 H.J. Lu PR binutis/18386 * i386-dis.c: Add comments for '@'. (x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9. (enum x86_64_isa): New. (isa64): Likewise. (print_i386_disassembler_options): Add amd64 and intel64. (print_insn): Handle amd64 and intel64. (putop): Handle '@'. (OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit. * i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64. * i386-opc.h (AMD64): New. (CpuIntel64): Likewise. (i386_cpu_flags): Add cpuamd64 and cpuintel64. * i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64. Mark direct call/jmp without Disp16|Disp32 as Intel64. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2015-05-14 Peter Bergner * ppc-opc.c (IH) New define. (powerpc_opcodes) : Do not enable for POWER7. : Add RS operand for POWER7. : Add IH operand for POWER6. 2015-05-11 H.J. Lu * opcodes/i386-opc.tbl (call): Remove Disp16|Disp32 from 64-bit direct branch. (jmp): Likewise. * i386-tbl.h: Regenerated. 2015-05-11 H.J. Lu * configure.ac: Support bfd_iamcu_arch. * disassemble.c (disassembler): Support bfd_iamcu_arch. * i386-gen.c (cpu_flag_init): Add CPU_IAMCU_FLAGS and CPU_IAMCU_COMPAT_FLAGS. (cpu_flags): Add CpuIAMCU. * i386-opc.h (CpuIAMCU): New. (i386_cpu_flags): Add cpuiamcu. * configure: Regenerated. * i386-init.h: Likewise. * i386-tbl.h: Likewise. 2015-05-08 H.J. Lu PR binutis/18386 * i386-dis.c (X86_64_E8): New. (X86_64_E9): Likewise. Update comments on 'T', 'U', 'V'. Add comments for '^'. (dis386): Replace callT/jmpT with X86_64_E8/X86_64_E9. (x86_64_table): Add X86_64_E8 and X86_64_E9. (mod_table): Replace {T|} with ^ on Jcall/Jmp. (putop): Handle '^'. (OP_J): Ignore the operand size prefix in 64-bit. Don't check REX_W. 2015-04-30 DJ Delorie * disassemble.c (disassembler): Choose suitable disassembler based on E_ABI. * rl78-decode.opc (rl78_decode_opcode): Take ISA parameter. Use it to decode mul/div insns. * rl78-decode.c: Regenerate. * rl78-dis.c (print_insn_rl78): Rename to... (print_insn_rl78_common): ...this, take ISA parameter. (print_insn_rl78): New. (print_insn_rl78_g10): New. (print_insn_rl78_g13): New. (print_insn_rl78_g14): New. (rl78_get_disassembler): New. 2015-04-29 Nick Clifton * po/fr.po: Updated French translation. 2015-04-27 Peter Bergner * ppc-opc.c (DCBT_EO): New define. (powerpc_opcodes) : Enable for POWER8 and later. : Likewise. : Likewise. : Likewise. : Do not enable for POWER7 and later. : Likewise. : Default to the two operand form of the instruction for all "old" cpus. For "new" cpus, use the operand ordering that matches whether the cpu is server or embedded. : Likewise. 2015-04-27 Andreas Krebbel * s390-opc.c: New instruction type VV0UU2. * s390-opc.txt: Fix instruction types for VFCE, VLDE, VFSQ, WFK, and WFC. 2015-04-23 Jan Beulich * i386-dis.c (putop): Extend "XY" handling to AVX512. Handle "XZ". * i386-dis-evex.h.c (vcvtpd2ps, vcvtqq2ps, vcvttpd2udq, vcvtpd2udq, vcvtuqq2ps, vcvttpd2dq, vcvtpd2dq): Add %XY. (vfpclasspd, vfpclassps): Add %XZ. 2015-04-15 H.J. Lu * i386-dis.c (PREFIX_UD_SHIFT): Removed. (PREFIX_UD_REPZ): Likewise. (PREFIX_UD_REPNZ): Likewise. (PREFIX_UD_DATA): Likewise. (PREFIX_UD_ADDR): Likewise. (PREFIX_UD_LOCK): Likewise. 2015-04-15 H.J. Lu * i386-dis.c (prefix_requirement): Removed. (print_insn): Don't set prefix_requirement. Check dp->prefix_requirement instead of prefix_requirement. 2015-04-15 H.J. Lu PR binutils/17898 * i386-dis.c (PREFIX_0FC7_REG_6): Renamed to ... (PREFIX_MOD_0_0FC7_REG_6): This. (PREFIX_MOD_3_0FC7_REG_6): New. (PREFIX_MOD_3_0FC7_REG_7): Likewise. (prefix_table): Replace PREFIX_0FC7_REG_6 with PREFIX_MOD_0_0FC7_REG_6. Add PREFIX_MOD_3_0FC7_REG_6 and PREFIX_MOD_3_0FC7_REG_7. (mod_table): Replace PREFIX_0FC7_REG_6 with PREFIX_MOD_0_0FC7_REG_6. Use PREFIX_MOD_3_0FC7_REG_6 and PREFIX_MOD_3_0FC7_REG_7. 2015-04-15 H.J. Lu * i386-dis.c (PREFIX_MANDATORY_REPZ): Removed. (PREFIX_MANDATORY_REPNZ): Likewise. (PREFIX_MANDATORY_DATA): Likewise. (PREFIX_MANDATORY_ADDR): Likewise. (PREFIX_MANDATORY_LOCK): Likewise. (PREFIX_MANDATORY): Likewise. (PREFIX_UD_SHIFT): Set to 8 (PREFIX_UD_REPZ): Updated. (PREFIX_UD_REPNZ): Likewise. (PREFIX_UD_DATA): Likewise. (PREFIX_UD_ADDR): Likewise. (PREFIX_UD_LOCK): Likewise. (PREFIX_IGNORED_SHIFT): New. (PREFIX_IGNORED_REPZ): Likewise. (PREFIX_IGNORED_REPNZ): Likewise. (PREFIX_IGNORED_DATA): Likewise. (PREFIX_IGNORED_ADDR): Likewise. (PREFIX_IGNORED_LOCK): Likewise. (PREFIX_OPCODE): Likewise. (PREFIX_IGNORED): Likewise. (Bad_Opcode): Replace PREFIX_MANDATORY with 0. (dis386_twobyte): Replace PREFIX_MANDATORY with PREFIX_OPCODE. (three_byte_table): Likewise. (mod_table): Likewise. (mandatory_prefix): Renamed to ... (prefix_requirement): This. (prefix_table): Replace PREFIX_MANDATORY with PREFIX_OPCODE. Update PREFIX_90 entry. (get_valid_dis386): Check prefix_requirement to see if a prefix should be ignored. (print_insn): Replace mandatory_prefix with prefix_requirement. 2015-04-15 Renlin Li * arm-dis.c (thumb32_opcodes): Define 'D' format control code, use it for ssat and ssat16. (print_insn_thumb32): Add handle case for 'D' control code. 2015-04-06 Ilya Tocar H.J. Lu * i386-dis-evex.h (evex_table): Fill prefix_requirement field. * i386-dis.c (PREFIX_MANDATORY_REPZ, PREFIX_MANDATORY_REPNZ, PREFIX_MANDATORY_DATA, PREFIX_MANDATORY_ADDR, PREFIX_MANDATORY_LOCK, PREFIX_UD_SHIFT, PREFIX_UD_REPZ, REFIX_UD_REPNZ, PREFIX_UD_DATA, PREFIX_UD_ADDR, PREFIX_UD_LOCK, PREFIX_MANDATORY): Define. (Bad_Opcode, FLOAT, DIS386, DIS386_PREFIX, THREE_BYTE_TABLE_PREFIX): Fill prefix_requirement field. (struct dis386): Add prefix_requirement field. (dis386): Fill prefix_requirement field. (dis386_twobyte): Ditto. (twobyte_has_mandatory_prefix_: Remove. (reg_table): Fill prefix_requirement field. (prefix_table): Ditto. (x86_64_table): Ditto. (three_byte_table): Ditto. (xop_table): Ditto. (vex_table): Ditto. (vex_len_table): Ditto. (vex_w_table): Ditto. (mod_table): Ditto. (bad_opcode): Ditto. (print_insn): Use prefix_requirement. (FGRPd9_2, FGRPd9_4, FGRPd9_5, FGRPd9_6, FGRPd9_7, FGRPda_5, FGRPdb_4, FGRPde_3, FGRPdf_4): Fill prefix_requirement field. (float_reg): Ditto. 2015-03-30 Mike Frysinger * d10v-opc.c (d10v_reg_name_cnt): Convert old style prototype. 2015-03-29 H.J. Lu * Makefile.in: Regenerated. 2015-03-25 Anton Blanchard * ppc-dis.c (disassemble_init_powerpc): Only initialise powerpc_opcd_indices and vle_opcd_indices once. 2015-03-25 Anton Blanchard * ppc-opc.c (powerpc_opcodes): Add slbfee. 2015-03-24 Terry Guo * arm-dis.c (opcode32): Updated to use new arm feature struct. (opcode16): Likewise. (coprocessor_opcodes): Replace bit with feature struct. (neon_opcodes): Likewise. (arm_opcodes): Likewise. (thumb_opcodes): Likewise. (thumb32_opcodes): Likewise. (print_insn_coprocessor): Likewise. (print_insn_arm): Likewise. (select_arm_features): Follow new feature struct. 2015-03-17 Ganesh Gopalasubramanian * i386-dis.c (rm_table): Add clzero. * i386-gen.c (cpu_flag_init): Add new CPU_ZNVER1_FLAGS. Add CPU_CLZERO_FLAGS. (cpu_flags): Add CpuCLZERO. * i386-opc.h: Add CpuCLZERO. * i386-opc.tbl: Add clzero. * i386-init.h: Re-generated. * i386-tbl.h: Re-generated. 2015-03-13 Andrew Bennett * mips-opc.c (decode_mips_operand): Fix constraint issues with u and y operands. 2015-03-13 Andrew Bennett * mips-opc.c (mips_builtin_opcodes): Add evp and dvp instructions. 2015-03-10 Andreas Krebbel * s390-opc.c: Add new IBM z13 instructions. * s390-opc.txt: Likewise. 2015-03-10 Renlin Li * aarch64-tbl.h (aarch64_opcode_table): Remove strub, ldurb, ldursb, stur, ldur, sturh, ldurh, ldursh, ldursw, prfum F_HAS_ALIAS flag and related alias. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. 2015-03-03 Jiong Wang * arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols. 2015-02-25 Oleg Endo * sh-opc.h (clrs, sets): Mark as arch_sh3_nommu_up instead of arch_sh_up. (pref): Mark as arch_sh2a_nofpu_or_sh3_nommu_up instead of arch_sh2a_nofpu_or_sh4_nommu_nofpu_up. 2015-02-23 Vinay * rl78-decode.opc (MOV): Added space between two operands for 'mov' instruction in index addressing mode. * rl78-decode.c: Regenerate. 2015-02-19 Pedro Alves * microblaze-dis.h [__cplusplus]: Wrap in extern "C". 2015-02-10 Pedro Alves Tom Tromey * microblaze-opcm.h (or, and, xor): Rename to microblaze_or, microblaze_and, microblaze_xor. * microblaze-opc.h (opcodes): Adjust. 2015-01-28 James Bowman * Makefile.am: Add FT32 files. * configure.ac: Handle FT32. * disassemble.c (disassembler): Call print_insn_ft32. * ft32-dis.c: New file. * ft32-opc.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. 2015-01-28 Kuan-Lin Chen * nds32-asm.c (keyword_sr): Add new system registers. 2015-01-16 Andreas Krebbel * s390-dis.c (s390_extract_operand): Support vector register operands. (s390_print_insn_with_opcode): Support new operands types and add new handling of optional operands. * s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove and include opcode/s390.h instead. (struct op_struct): New field `flags'. (insertOpcode, insertExpandedMnemonic): New parameter `flags'. (dumpTable): Dump flags. (main): Parse flags from the s390-opc.txt file. Add z13 as cpu string. * s390-opc.c: Add new operands types, instruction formats, and instruction masks. (s390_opformats): Add new formats for .insn. * s390-opc.txt: Add new instructions. 2015-01-01 Alan Modra Update year range in copyright notice of all files. For older changes see ChangeLog-2014 Copyright (C) 2015 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never End: