Wed Apr 29 15:26:51 1992 Per Bothner (bothner@rtl.cygnus.com) * cplus-dem.c: Allow nested class names (as in Foo::Bar::method()). Allow the cleaner cfront style of nested class names (Q2_3Foo3Bar as well as Q23Foo3Bar). Make cplus_demangle re-entrant by removing use of global variables. Instead, place all shared variables in a stack-allocated structure, and pass around its address. Fri Apr 24 07:41:19 1992 Stu Grossman (grossman at cygnus.com) * Makefile.in (make-proto-gdb-1): 1st cut at packaging 29k-share/* subdirs... * remote-udi.c (udi_insert/remove_breakpoint): Completely rewrite, only leave out the bugs. * Makefile.in: Add 29k/UDI support. Improve depend. * .Sanitize, alldeps.mak, configure.in, depend: Add 29k/UDI support. * am29k-tdep.c: Update to use new calling conventions, and misc symbol elements. * m68k-pinsn.c (print_insn_arg): Make branch offsets be signed. Thu Apr 23 18:43:17 1992 Fred Fish (fnf@cygnus.com) * tm-29k.h: Set DECR_PC_AFTER_BREAK to 0, as 29ks have nice breakpoint instructions that leave PC pointing at the right place. * core.c (core_open): Call warning() to print warnings. Wed Apr 22 09:55:42 1992 Stu Grossman (grossman at cygnus.com) * symtab.c (lookup_symbol): Need to check if msymbol->name is NULL, as ALL_MSYMBOLS will never return a NULL msymbol pointer. This prevents a crash when trying to lookup the value of a non-existent symbol. Wed Apr 22 09:42:15 1992 Fred Fish (fnf@cygnus.com) * signame.c, signame.h: Remove, replaced by strsignal.c in libiberty. * i960-tdep.c, infrun.c, mach386-xdep.c, procfs.c, sparc-tdep.c, sun386-xdep.c: Remove include of signame.h * Makefile.in (SFILES_MAINDIR): Remove signame.c * Makefile.in (HFILES): Remove signame.h * Makefile.in (OBS): Remove signame.o * defs.h (safe_strerror, safe_strsignal, strerrno, strsigno, errno_max, signo_max, strtoerrno, strtosigno, strsignal, psignal, perror): Add prototypes. * defs.h, xm-apollo68v.h, xm-ultra3.h (SYS_SIGLIST_MISSING): Remove define. * depend: Manually remove signame.[cho] references. * convex-tdep.c (subsig_name): Replace use of sys_siglist with strsignal. * convex-xdep.c (core_file_command): Replace use of sys_siglist with safe_strsignal. * core.c (core_open): Replace use of sys_siglist with safe_strsignal. * core.c (memory_error): Replace use of sys_errlist with safe_strerror. * i960-tdep.c (print_fault): Replace use of sys_siglist with safe_strsignal. * infcmd.c (program_info): Replace use of sys_siglist with safe_strsignal. * infrun.c (signal_stop, signal_print, signal_program): Allocate dynamically based on dynamic determination of number of signals to support. * infrun.c (child_create_inferior): Replace use of sys_errlist with safe_strerror. * infrun.c (wait_for_inferior): Replace use of sys_siglist with safe_strsignal. * infrun.c (sig_print_info): Replace use of sig_abbrev with strsigno and sys_siglist with safe_strsignal. * infrun.c (handle_command): Call signo_max to find number of signals. Replace sig_number with strtosigno and sig_abbrev with strsigno. * infrun.c (signals_info): Replace sig_number with strtosigno. * infrun.c (_initialize_infrun): Call signo_max to find number of signals. Dynamically allocate signal_{stop,print,program}. * procfs.c (errno_table): Remove, now in libiberty/strerror.c. * procfs.c (errnoname): Add function and prototype. * procfs.c (info_proc_siginfo): Call errnoname, replace use of sys_siglist with safe_strsignal. * procfs.c (info_proc_stop, info_proc_signals): Replace use of sys_siglist with safe_strsignal. * procfs.c (info_proc_stop): Call errnoname. * procfs.c (signalname): Replace sig_abbrev with strsigno. * stuff.c (main, get_offset): Replace use of sys_errlist with strerror. * sun386-xdep.c (core_file_command): Replace use of sys_siglist with safe_strsignal. * umax-xdep.c (core_file_command): Replace use of sys_siglist with safe_strsignal. * utils.c (safe_strerror, safe_strsignal): Add functions that call strerror and strsignal respectively, and deal with NULL returns. * utils.c (perror_with_name, print_sys_errmsg): Replace use of sys_errlist with safe_strerror. * valprint.c (val_print): Replace use of sys_errlist with safe_strerror. Tue Apr 21 12:00:47 1992 K. Richard Pixley (rich@cygnus.com) * Makefile.in: rework CFLAGS so that they can be set from the command line to make. CFLAGS -> INTERNAL_CFLAGS. USER_CFLAGS -> CFLAGS. Remove MINUS_G. Default CFLAGS to -g. Pass CFLAGS on recusions. Fri Apr 17 19:25:57 1992 Fred Fish (fnf@cygnus.com) * gdbtypes.h, c-exp.y, m2-exp.y, mipsread.c, gdbtypes.c: Back out of change on 4/14/92 and remove TYPE_FLAG_FUND_TYPE. It was overkill for the problem it solved. * valprint.c (type_print_base): Remove TYPE_FLAG_FUND_TYPE test and default to simply printing type names as appropriate. * main.c (main): Remove one of the leading newlines from warning_pre_print initialization. * objfiles.c (open_existing_mapped_file): Add function and prototype. * objfiles.c (open_mapped_file): Rewrite to use new function open_existing_mapped_file. Thu Apr 16 23:50:12 1992 John Gilmore (gnu at cygnus.com) * sun3-xdep.c (fetch_core_registers): Lint. * tm-sun3.h: Prototype lint. * value.h: Typo. Thu Apr 16 19:56:50 1992 Fred Fish (fnf@cygnus.com) * dwarfread.c (TARGET_FT_POINTER_SIZE, TARGET_FT_LONG_SIZE): Define using TARGET_PTR_BIT and TARGET_LONG_BIT for now. * objfiles.c: Cast calls to close() with unused returns to void. * objfiles.c (allocate_objfile): Initialize objfile's mmfd, free old objfile's name before updating it. * objfiles.c (free_objfile): Major rewrite for mapped objfiles. * objfiles.h (objfile struct): Add mmfd member. * symfile.c (syms_from_objfile): Move some code to new_symfile_objfile. * symfile.c (new_symfile_objfile): Add new function, common code from syms_from_objfile. * symfile.c (symbol_file_add): Call new_symfile_objfile for both mapped and unmapped symbol files. * symfile.c (symbol_file_command): Print "No symbol file now" message, ala exec_file_command for the exec file. * symfile.h (new_symfile_objfile): Add prototype. * xcoffexec.c (map_vmap): Add call to new_symfile_objfile. * xcoffsolib.c (solib_add): Add call to new_symfile_objfile. Thu Apr 16 18:26:34 1992 Per Bothner (bothner@cygnus.com) * rs6000-pinsn.c: New version from IBM (Metin). * m2-exp.y: Re-write string initializers ("<>" => {'<', '>'}) to avoid warnings from some compilers. Tue Apr 14 22:33:55 1992 Fred Fish (fnf@cygnus.com) * gdbtypes.h (FT_FIXED_DECIMAL, FT_FLOAT_DECIMAL): Add defines. * gdbtypes.h (TYPE_FLAG_FUND_TYPE): Add define for bit in a type's flag word that marks it as a fundamental type. * c-exp.y (_initialize_c_exp): Add TYPE_FLAG_FUND_TYPE bit to flags argument for all calls to init_type(). * m2-exp.y (_initialize_m2_exp): Add TYPE_FLAG_FUND_TYPE bit to flags argument for all calls to init_type(). Also remove dependency on host sizes for ints, floats, etc. * mipsread.c (_initialize_mipsread): Add TYPE_FLAG_FUND_TYPE bit to flags argument for all calls to init_type(). Also remove dependency on host sizes for ints, floats, etc. * gdbtypes.c (lookup_fundamental_type): Add TYPE_FLAG_FUND_TYPE bit to flags argument for all calls to init_type(). Add types FT_FIXED_DECIMAL and FT_FLOAT_DECIMAL. * valprint.c (unsigned_type_table, signed_type_table, float_type_table): Remove. * valprint.c (type_print_base): Test new TYPE_FLAG_FUND_TYPE bit when printing fundamental types, and print the actual name for such types, rather than inventing one. Remove code that invented fundamental type names. * valprint.c (_initialize_valprint): Remove initializations for now removed unsigned_type_table, signed_type_table, and float_type_table. Tue Apr 14 14:30:46 1992 Stu Grossman (grossman at cygnus.com) * remote-vx.c, vx-share/xdr_ptrace.c, vx-share/xdr_ptrace.h, vx-share/xdr_rdb.h: Update for new remote protocol under VxWorks 5.0.2. Mon Apr 13 20:59:21 1992 Fred Fish (fnf@cygnus.com) * dwarfread.c (target_to_host): New function similar to previous swapin function. * dwarfread.c (SWAPIN, swapin): Remove macro and support function. Extensive changes to convert all previous usages to use new target_to_host() function. * dwarfread.c (struct dieinfo): Change types of most integral members to be unsigned. Mon Apr 13 15:59:10 1992 John Gilmore (gnu at cygnus.com) * WHATS.NEW: Revise -mapped doc. Sat Apr 11 23:14:36 1992 John Gilmore (gnu at cygnus.com) * mipsread.c (parse_partial_symbols): Complain when sh->index is too high or when skipping `forwards' moves us backwards. (parse_type): Print mis-guessed tag name in complaint. (parse_external): Eliminate cur_stab and obscure top_stack clobbers. (parse_procedure): Do not attempt to create symbols; just fill in the SYMBOL_VALUE field of a .gdbinfo. symbol if we can find one. (psymtab_to_symtab_1): Split up `stabs' from `native ecoff' code for clarity. Set top_stack before calling parse_external. In stabs, sort symbols before calling parse_procedure. * mipsread.c: Lint. * symmisc.c (std_in, std_out, std_err): Add vars to access std FILE *'s when debugging GDB (e.g. as args to dump_symtab). * Makefile.in: Remove stage* targets. Avoid echo on recursive makes. Eliminate doc/Makefile from tar.Z file if doc/Makefile.in exists. Fri Apr 10 23:47:37 1992 John Gilmore (gnu at cygnus.com) * Makefile.in (VERSION): Set to 4.5.1. * xcoffread.c (NO_TYPEDEFS): Fix typo in commented-out #define. * sparc-tdep.c (supply_gregset, fill_gregset, supply_fpregset, fill_gregset): New functions for SVR4 /proc support. * mipsread.c: Cleanup. Add more complaints for unhandled cases. Remove new symbol types and such to ../include/coff/symconst.h. (parse_symbol): Simplify code for parsing struct/enum/unions. (parse_type): Handle `long long' types. (upgrade_type): Handle `const' qualifier. (parse_partial_symbols): fix indentation, clean a bit. Fri Apr 10 22:41:03 1992 Fred Fish (fnf@cygnus.com) * dwarfread.c (SWAPIN,swapin): New macro and function to call to copy in data from raw read buffers, calling bfd byteswapping routines as appropriate. Use to replace most existing memcpy calls. * dwarfread.c (basicdieinfo, completedieinfo): Add objfile arg. * configure.in: Recognize new ncr3000 config. * config/ncr3000.mh: New config file. Fri Apr 10 08:30:58 1992 Stu Grossman (grossman at cygnus.com) GDB-4.5 release! * README: Update for release. * Makefile.in: Update version to 4.5. * WHATS.NEW: The obvious. * depend: Generate new depend file for this release. * Makefile.in (depend): Fix dependancy generation so that it does not include gcc 'fixincluded' files, which are usually in a system specific location. Thu Apr 9 13:35:00 1992 Per Bothner (bothner@rtl.cygnus.com) Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik). * buildsym.c (#ifdef RS6000_TARGET): Don't create unnecessary symbols for nameless types. And, handle `R' (register parameter type) for AIX. (an extension to existing stabstring grammar). * rs6000-xdep.c: Fix typo (= should have been ==). Thu Apr 9 12:10:06 1992 Stu Grossman (grossman at cygnus.com) * Makefile.in: version=4.4.88, add xm-vax.h to HFILES. Thu Apr 9 02:29:03 1992 John Gilmore (gnu at cygnus.com) * xm-sun4os5.h (DO_DEFERRED_STORES, CLEAR_DEFERRED_STORES): Zap. * signame.c (SIGWAITING, SIGLWP): Add. Tue Apr 7 16:34:07 1992 Per Bothner (bothner@cygnus.com) * xm-i386mach.h: add decls for errno and strdup(). * breakpoint.c (breakpoint_1): Add (int) casts for enums used in array index context (otherwise, some compilers barf). Tue Apr 7 08:45:46 1992 Stu Grossman (grossman at cygnus.com) * m68k-tdep.c, tm-sun3.h: #ifdef around get_longjmp_target(). Change def of SAVED_PC_AFTER_CALL to call routine to see if we are in a system call, and provide better backtrace if so. * Makefile.in (HFILES): Add xcoffsolib.h. * rs6k-opcode.h: Move to ../include/opcode/rs6k.h. * rs6000-pinsn.c: #include "opcode/rs6k.h" * mipsread.c (read_mips_symtab, read_the_mips_symtab, mipscoff_symfile_read): Convert to BFD to do file I/O. * symfile.c: #include to get proper def if isspace(). * i386-tdep.c (get_longjmp_target): #ifdef GET_LONGJMP_TARGET. Mon Apr 6 17:25:45 1992 Per Bothner (bothner@cygnus.com) * mipsread.c: Create a .gdbinfo pseudo-symbol for each function also when parsing embedded stabs. Mon Apr 6 15:25:03 1992 Stu Grossman (grossman at cygnus.com) * mipsread.c: Fix more declarations. * mipsread.c: Fix many invocations of complain. Use enum type_code where appropriate. * xm-vaxult.h: Add decl for strdup(). * Makefile.in: Add dependancies for xm-vaxbsd.h and xm-vaxult.h for xm-vax.h. Fri Apr 3 17:41:29 1992 Stu Grossman (grossman at cygnus.com) * buildsym.h, dbxread.c, mipsread.c: Add objfile arg to process_one_symbol. Fri Apr 3 12:17:14 1992 Per Bothner (bothner@cygnus.com) * munch: Must pre-pend "_" to "initialize" for SYSV style nm. * tm-rs6000.h, xcoffexec.c, xcoffread.c, xm-rs6000.h: Merge in more patches for rs6000 from Metin Ozisik. * utils.c: Fix typo in comment. Fri Apr 3 11:23:03 1992 Fred Fish (fnf@cygnus.com) * procfs.c (procinfo struct): Add nopass_next_sigstop member. * procfs.c (attach): Set nopass_next_sigstop if attached process is forcibly stopped. * procfs.c (child_resume): Use nopass_next_sigstop to suppress resending SIGSTOP to attached process on first resume. Fri Apr 3 01:37:26 1992 Stu Grossman (grossman at cygnus.com) * Makefile.in (SFILES_MAINDIR): add mipsread.c Thu Apr 2 20:20:54 1992 John Gilmore (gnu at cygnus.com) * Makefile.in (OBS): Compile mipsread.c for all targets now. (VERSION): Bump to 4.4.85. * mipsread.c: Update for new include files. Lint. * tm-irix3.h, tm-mips.h: Use new include files for ECOFF symtab. * config/{bigmips.mt, littlemips.mt, irix3.mt, decstation.mt}: Don't need to bring in mipsread.o specially any more. Thu Apr 2 19:38:31 1992 Stu Grossman (grossman at cygnus.com) * mipsread.c (fixup_sigtramp): Also look for _sigtramp as a real routine (for Irix-4.x). Make many funcs static and void. * mips-tdep.c (mips-frame-chain): Clean up, simplify. * (init_extra_frame_info): Don't trash cached value of frame pointer register. This fixes backtracing through routines that use alloca(). Generally clean up declarations of functions, and use typedefs and macros to reference data structures as appropriate. * tm-irix3.h, tm-mips.h (EXTRA_FRAME_INFO): use proper type for proc_desc element. Thu Apr 2 09:47:11 1992 Fred Fish (fnf@cygnus.com) * values.c (unpack_long): Fix unpacking error for signed chars on hosts where the default character type is unsigned. * procfs.c (pr_flag_table, pr_why_table): Add some entries for newer SVR4 variants. * procfs.c (proc_set_exec_trap): Reorder tests for ioctl's that turn off trace inherit-on-fork flag to favor latest SVR4 method. * procfs.c (mappingflags): Add support for MA_PHYS Thu Apr 2 00:55:56 1992 John Gilmore (gnu at cygnus.com) * buildsym.c (read_struct_type): Avoid coredump when C++ abbreviated type name is messed up. Reported by Joe Buck. FIXME, we need to determine whether GDB or GCC needs to be smarter to correctly locate this type name. * c-exp.y, coffread.c, command.c, command.h, copying.awk, dbxread.c, gdbtypes.c, infcmd.c, inferior.h, infrun.c, m2-exp.y, printcmd.c, remote.c, solib.c, source.c, stack.c, symtab.c, tm-sun4os4.h, tm-sun4os5.h, values.c: Lint. * symfile.c (add_symbol_file_command): Initialize mapped/readnow. Wed Apr 1 11:39:52 1992 Fred Fish (fnf@cygnus.com) * breakpoint.h (bpdisp, bptype): Remove trailing comma. * symtab.h (current_source_symtab): Make extern * symtab.h (current_source_line): Make extern * inferior.h: Move all procfs.c prototypes to one place, add prototype for proc_signal_handling_change. Add prototypes for signal_stop_state, signal_print_state, and signal_pass_state. * inferior.h (stop_soon_quietly): Make extern * inferior.h (attach_flag): Make extern * infrun.c (NOTICE_SIGNAL_HANDLING_CHANGE): Default is null. * infrun.c (signal_stop_state, signal_print_state, signal_pass_state): New functions to query specific signal handling flags. * infrun.c (handle_command): Minor error message change, add NOTICE_SIGNAL_HANDLING_CHANGE. * procfs.c (open_proc_file): Remove iris specific reset of inherit-on-fork flag, moved to proc_set_exec_trap(). * procfs.c (proc_set_exec_trap): Add SVR4 and iris code to reset inherit-on-fork flag, bash comment to GNU form. * procfs.c (proc_base_address, set_proc_siginfo, fetch_core_registers): Conform to code style. * procfs.c (signame.h): Include. * procfs.c (MAX_SYSCALLS, syscall_table[], init_syscalltable(), syscallname(), info_proc_syscalls()): New macros, tables, and functions to organize and report system call information. * procfs.c (saved_fltset, saved_trace, saved_sighold, saved_exitset, saved_entryset): Add to procinfo struct. * procfs.c (struct trans): Add. * procfs.c (pr_flag_table, pr_why_table, faults_table, siginfo_table, errno_table): Tables to translate numeric values to symbolic names and short descriptions. * procfs.c (signalname, info_proc_signals): Add function and prototype. * procfs.c (proc_info): Now info_proc. * procfs.c (proc_info_address_map): Now info_proc_mappings. * procfs.c (info_proc_flags, info_proc_stop, info_proc_siginfo, info_proc_faults, lookupname, lookupdesc, sigcodename, sigcodedesc): New functions. * procfs.c (proc_signal_handling_change): New function to set the trace flags based on the state of gdb's signal handling flags. * procfs.c (inferior_proc_init): Call proc_signal_handling_change and remove code to do PIOCSTRACE ioctl. * procfs.c (attach, detach): Preserve and restore process flags using saved_* fields in procinfo struct. * procfs.c (attach): Call proc_signal_handling_change. * procfs.c (info_proc): Major rework to expand "info proc" cmd. * procfs.c (proc_desc): Update for latest changes. * xm-irix4.h (CREATE_INFERIOR_HOOK): Protect by USE_PROC_FS. * xm-irix4.h (NOTICE_SIGNAL_HANDLING_CHANGE): Add definition. * xm-sysv4.h (NOTICE_SIGNAL_HANDLING_CHANGE): Add definition. Tue Mar 31 18:38:28 1992 Fred Fish (fnf@cygnus.com) * procfs.c (set_proc_siginfo): Add prototype and new function. * procfs.c (detach, child_resume): Call set_proc_siginfo to set up inferior siginfo struct. * elfread.c (elf_symfile_read): Compute the relocation amount by subtracting off the address of the ".text" section. * solib.c: Add pointer to ".text" section to so_list struct. * solib.c (solib_map_sections): Initialize pointer to ".text" section in so_list struct. * solib.c (symbol_add_stub): Pass base address of ".text" section to symbol_file_add, rather than the load address of the shared library. On SunOS they are the same. On SVR4 they are not. Tue Mar 31 17:48:15 1992 Stu Grossman (grossman at cygnus.com) * mipsread.c (parse_procedure): PDR.isym should get pointer to function name, not .gdbinfo. symbol. Tue Mar 31 17:05:04 1992 John Gilmore (gnu at cygnus.com) * breakpoint.c (breakpoint_1): Fix prototype, this time for sure! Tue Mar 31 11:01:06 1992 Stu Grossman (grossman at cygnus.com) * Makefile.in (VERSION): 4.4.8 * procfs.c (open_proc_file): Disable inherit-on-fork flag so that commands in .cshrc/.profile won't get traced. Tue Mar 31 08:11:58 1992 John Gilmore (gnu at cygnus.com) * elfread.c (elf_symtab_read): Use xmalloc, not bfd_xmalloc. * exec.c (build_section_table): Don't abort if no sections. * sparc-tdep.c (single_step): Lint. * utils.c (mrealloc): Handle realloc (0, size) case here. Mon Mar 30 16:50:43 1992 Stu Grossman (grossman at cygnus.com) * Makefile.in (alldeps.mak): Config files are now *.m[ht] as opposed to m[ht]-*! * config/irix4.mh: Don't use coredep.o. It doesn't work with procfs. * mipsread.c (parse_symbol, parse_procedure): Re-do the way that .gdbinfo. symbols are created. Move creation from parse_procedure to parse_symbol, where it is fairly easy to grow the symtab. This also fixes a symtab trashing bug on all mips-based systems. * (got_numargs, lookup_numargs, free_numargs): Delete. Not needed anymore. * tm-mips.h, tm-iris3.h, mips-tdep.c, mipsread.c: Re-do struct mips_extra_func_info, and all the PROC_xxx macros that look at it. Mon Mar 30 14:17:53 1992 Per Bothner (bothner@cygnus.com) * c-exp.y: Add missing return type to yyparse() prototype. Sat Mar 28 22:22:06 1992 John Gilmore (gnu at cygnus.com) Create and use macros for iterating on symtabs, psymtabs, msymbols. * minsyms.c (iterate_over_msymbols): Remove; clunky and slow. * symfile.h, symtab.h (iterate_over_msymbols): Remove prototype * coffread.c (coff_symfile_read): iterate_over_symtabs => ALL_SYMTABS. (patch_opaque_types): Avoid dummy args and result. * objfiles.c (have_partial_symbols, have_full_symbols, have_minimal_symbols): explicit iteration => ALL_OBJFILES; simplify. (iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs): Remove, clunky and slow. * objfiles.h: Replace iterate_over_* prototypes with ALL_SYMTABS, ALL_PSYMTABS, and ALL_MSYMBOLS macros. * symmisc.c (dump_symtab, dump_psymtab, dump_msymbols, dump_objfile): Remove dummy args and results. Move filename comparisons to callers. (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): iterate_over_* => ALL_*. Compare filenames. * symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab, lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info, list_symbols, make_symbol_completion_list): Replace explicit iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS. Eliminate Dijkstra flag crap, break out of loops with gotos. (lookup_symtab_1): Protect '/' tests from short filenames. (cplus_mangled_symbol): Move inline into lookup_symbol. * xcoffexec.c (relocate_objfile_msymbols): Remove poor hack. (relocate_minimal_symbol): Move inline to vmap_symtab. (vmap_symtab): Replace iteration with ALL_OBJFILES, iterate_over_msymbols with ALL_MSYMBOLS. Misc cleanup prior to release. * Makefile.in (VERSION): Roll to 4.4.7. (HFILES): Add call-cmds.h. * call-cmds.h: New header for command fns called by other files. * breakpoint.c (watchpoints_info): Remove, same as breakpoints_info. (breakpoint_1): Remove unused type arg. Change callers. * dwarfread.c (dwarf_build_psymtabs): Remove mainline test. * mipsread.c (compare_symtabs, compare_psymtabs): Remove, unused. * mipsread.c: Add prototypes for all static functions. * symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove, unused. * xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab, dump_blockvector, dump_block, dump_addrchass, dump_namespace, dump_symbol, dump_type, dump_linetable, dump_strtbl): Remove 2nd unused copy! * buildsym.c (define_symbol): Handle global register variables (from Pierre Willard). Complain if register numbers are too large. * target.c (nomemory): Now that higher levels examine errno, give EIO. * tm-sparc.h: Don't #include . * sparc-tdep.c (sparc_frame_chain, frame_saved_pc): Remove dependency on . Start to handle cross-byte-order. * language.h: Avoid forward enum declaration. * configure.in, tm-sun4os5.h, xm-sun4os5.h, config/sun4os5.mh, config/sun4os5.mt: New host and target. * defs.h (errno): #include rather than assuming int. From Pierre Willard. * breakpoint.c, breakpoint.h, buildsym.c, coffread.c, cplus-dem.c, dbxread.c, dwarfread.c, elfread.c, infcmd.c, infrun.c, inftarg.c, language.c, main.c, mem-break.c, mips-tdep.c, mipsread.c, partial-stab.h, remote.c, saber.suppress, symfile.c, symtab.c, valops.c, valprint.c, xcoffread.c, c-exp.y, m2-exp.y, blockframe.c, command.c, core.c, exec.c, gdbtypes.h, parse.c, printcmd.c, solib.c, sparc-xdep.c, utils.c, value.h, values.c: Lint. Sat Mar 28 02:43:26 1992 John Gilmore (gnu at cygnus.com) * buildsym.c (read_range_type): Avoid int overflow by using unsigned. * dbxread.c (dbx_symfile_init): Remove bogus `lvalue cast'. * language.h (enum exp_opcode): Avoid forward enum def. * main.c (define_command, user_defined_command): Lint. * mem-break.c, xcoffread.c: Lint. * solib.c: Only #include on SunOS, not SVR4. Sun Mar 29 14:16:22 1992 Per Bothner (bothner@cygnus.com) * Merged in latest RS6000 diffs from Metin G. Ozisik. * xcoffsolib.c, xcoffsolib.h: New files, from Metin. * Various files: Changed #ifdef IBM6000 to IBM6000_HOST or IBM6000_TARGET as (approximately) appropriate. Sat Mar 28 13:00:10 1992 Fred Fish (fnf@cygnus.com) * objfiles.h (OBJF_SYMS): Define flag bit for objfile flags. * symfile.c (symbol_file_add): Use OBJF_SYMS to decide whether or not to try reading symbols from a mapped objfile. Plugs memory leak due to shared libraries generating no psymtabs or symtabs. Fri Mar 27 15:44:55 1992 John Gilmore (gnu at cygnus.com) * buildsym.c (MAX_OF_C_TYPE, MIN_OF_C_TYPE): Unused, remove. * copying.awk: Lint. Make stronger warning at top of copying.c. * elfread.c (elf_symtab_read): Eliminate check of mainline. * gdbtypes.c (smash_to_*): Remove FIXME comments. (lookup_pointer_type): Add FIXME comment. * main.c (set_history_size_command): Disallow negative size. * partial-stab.h: Update copyright. * rs6000-tdep.c (skip_trampoline_code): Better comments. Wed Mar 25 10:45:38 1992 John Gilmore (gnu at cygnus.com) * main.c (set_history_size_command): Negative size is error. (Reported by Peggy Fieland.) Thu Mar 26 17:01:18 1992 Fred Fish (fnf@cygnus.com) * coffread.c (coff_symfile_init): Update comment. * dbxread.c (DBX_SYMFILE_INFO, DBX_TEXT_SECT, DBX_SYMCOUNT, DBX_STRINGTAB, DBX_STRINGTAB_SIZE, DBX_SYMTAB_OFFSET): Define macros to access the dbx specific objfile information. * dbxread.c (symfile_string_table, symfile_string_table_size): Remove these local variables. * dbxread.c (read_ofile_symtab, psymtab_to_symtab_1, read_dbx_symtab): Remove the stringtab and stringtab_size params from the function prototypes, the function definition, and the function calls. These are now available via DBX_STRINGTAB and DBX_STRINGTAB_SIZE using the objfile pointer. * dbxread.c (dbx_symfile_read): Relocate addr before using as an arg to read_dbx_symtab. * dbxread.c (dbx_symfile_read): Remove code that free'd the stringtab and the dbx specific per-objfile private info. * dbxread.c (init_psymbol_list): Remove symbol count from passed args in prototype, function definition, and function calls. It is now available via the DBX_SYMCOUNT macro using the objfile pointer. * dbxread.c (dbx_symfile_read, dbx_symfile_init): Remove the local instance of struct dbx_symfile_info and replace with DBX_* macros. * dbxread.c (dbx_symfile_read): Remove init's of now deleted symfile_string_table and symfile_string_table_size. * dbxread.c (dbx_symfile_finish): Remove now obsolete free of symfile_string_table. * dbxread.c (init_psymbol_list): Use DBX_SYMCOUNT. * dbxread.c (dbx_psymtab_to_symtab): Remove local stringtab and stringtab size variables. Remove all code that used to reread the stringtab. * objfiles.c (allocate_objfile): Move calls to init_malloc() to prior to any calls to mmalloc for the objfile specific heap. * utils.c (init_malloc): Document the requirement that for each heap for which corruption checking is desired, that init_mmalloc must be called prior to any mmalloc calls on the heap. Thu Mar 26 13:20:06 1992 Per Bothner (bothner@cygnus.com) * rs6000-pinsn.c: Make dis-assembly output more like other targets: Don't print instruction in hex before the assembly; use print_address to print out jump destinations. Wed Mar 25 16:52:35 1992 Per Bothner (bothner@cygnus.com) * c-exp.y, gdbtypes.h: Add builtin_type_signed_char. * cplus-dem.c: Support "Sc" meaning "signed char". Wed Mar 25 15:21:44 1992 Stu Grossman (grossman at cygnus.com) * configure.in: fix iris/iris3. Wed Mar 25 14:55:48 1992 Per Bothner (bothner@cygnus.com) * command.c, main.c (various places): Use ctype.h macros (such as isupper(x)), instead of hard-wiring in ASCII-isms (such as (x >= 'A' && x <= 'Z')). (There are still more of these in other files.) * main.c (defined_command): Lower-case the user's new command before entering it. Needed because command lookup is case-insensitive (and also lower-cases). (Based on Metin's earlier patch.) Tue Mar 24 23:27:01 1992 K. Richard Pixley (rich@cygnus.com) * config/irix4.mh: new file. Tue Mar 24 14:17:48 1992 Stu Grossman (grossman@cygnus.com) * infcmd.c (step_1): Call disable_longjmp_breakpoint at the right time. * xm-mips.h: Declare strdup for ultrix. * mipsread.c (fixup_sigtramp): Make sure that current_objfile is setup when calling new_symbol. * mips-tdep.c (mips_frame_chain): Use symfile_objfile instead of current_objfile. Tue Mar 24 13:26:25 1992 Per Bothner (bothner@rtl.cygnus.com) * config/rs6000.mh: Update (for Fred's new mmalloc) flags to disable use of GNU malloc/mmalloc. * munch: Change SYSV rule to allow .text before the label, as well as after, to work for AIX. * gdbtypes.h: Minor clarifiction. Tue Mar 24 07:26:19 1992 Michael Tiemann (tiemann@cygnus.com) * buildsym.c (read_struct_type): Handle cretinous dbx symbol name continuation in yet another place (between method declarations). Mon Mar 23 23:01:41 1992 Stu Grossman (grossman at cygnus.com) * mips-tdep.c: include symfile.h and objfiles.h to fix compilation errors. Mon Mar 23 15:49:14 1992 Per Bothner (bothner@cygnus.com) * valops.c (value_struct_elt_for_reference): Added 'offset' parameter to handle multiple inheritance. * eval.c, value.h: Update accordingly. Fri Mar 20 17:43:27 1992 Fred Fish (fnf@cygnus.com) * objfiles.h: New file * Makefile.in (HFILES): Add objfiles.h * blockframe.c: Remove entry_scope_lowpc, entry_scope_highpc, main_scope_lowpc, main_scope_highpc. * blockframe.c, buildsym.c, coffread.c, dbxread.c, dwarfread.c, elfread.c, gdbtypes.h, minsyms.c, mipsread.c, objfiles.c, solib.c, source.c, symfile.c, symmisc.c, symtab.c, target.c, xcoffexec.c, xcoffread.c, : Include objfiles.h. * tm-29k.h, tm-i386v.h, tm-merlin.h, tm-rs6000.h, tm-sun386.h, tm-symmetry.h, tm-tahoe.h, tm-umax.h, tm-vax.h, m88k-tdep.c, mips-tdep.c (FRAME_CHAIN): Renamed outside_startup_file to inside_entry_file() and logic changed appropriately. * blockframe.c (outside_startup_file): Renamed to inside_entry_file() and logic changed appropriately. * blockframe.c (inside_main_scope): Renamed to inside_main_func() and logic changed to use per-objfile specific fields. * blockframe.c (inside_entry_scope): Renamed to inside_entry_func() and logic changed to use per-objfile specific fields. * blockframe.c, buildsym.h, coffread.c, dwarfread.c, mipsread.c, symfile.c, mips-tdep.c (startup_file_start, startup_file_end): Remove extern decls. * symfile.c, symfile.h (entry_point): Remove extern decl. * coffread.c (coff_symfile_init): Common entry point init code moved to symfiles.c, call init_entry_point_info(). * coffread.c (complete_symtab): Use new per-objfile entry info. * mip-tdep.c (mips_frame_chain): Use new per-objfile entry info. * mipsread.c (parse_partial_symbols): Use new per-objfile entry info. * dbxread.c (read_dbx_symtab): Use new per-objfile entry info. * defs.h (inside_entry_scope, outside_startup_file, inside_main_scope): Prototypes changed for renames to inside_entry_func, inside_entry_file, inside_main_func, respectively. * symfile.c (syms_from_objfile): Common entry point init code moved to init_entry_point_info() and call init_entry_point_info(). * symfile.h (init_entry_point_info): Include prototype. * xcoffread.c (aixcoff_symfile_init): Common entry point init code moved to symfiles.c and call init_entry_point_info(). * dwarfread.c (entry_scope_lowpc, entry_scope_highpc, main_scope_lowpc, main_scope_highpc): Remove extern decls. * dwarfread.c (read_func_scope, read_file_scope): Use new per- objfile entry info. * frame.h (FRAME_CHAIN_VALID): Provide default definition that works for the majority of targets. * tm-68k.h, tm-convex.h, tm-h8300.h, tm-i386v.h, tm-irix3.h, tm-merlin.h, tm-mips.h, tm-pyr.h, tm-rs6000.h, tm-sparc.h, tm-sun386.h, tm-tahoe.h, tm-umax.h, tm-vax.h (FRAME_CHAIN_VALID): Use default definition in frame.h. * frame.h (selected_frame_level): Make decl extern. * objfiles.c, symfile.c (current_objfile): Moved to objfiles.c * objfiles.c, symfile.c (symfile_objfile): Moved to objfiles.c * partial-stab.h: Use new per-objfile entry info. * symfile.h (struct objfile): Removed, moved to objfiles.h. * symfile.h, objfiles.h (allocate_objfile, free_objfile, free_all_objfiles, iterate_over_objfiles, iterate_over_symtabs, iterate_over_psymtabs, have_partial_symbols, have_full_symbols, have_minimal_symbols): Prototypes moved to objfiles.h. * symfile.h, objfiles.h (ALL_OBJFILES, ALL_OBJFILES_SAFE): Macros moved to objfiles.h. * tm-h8300.h, tm-i386v4.h (FRAME_CHAIN_VALID_ALTERNATE): Define. Thu Mar 19 18:49:45 1992 Per Bothner (bothner@cygnus.com) More C++ improvements (pointers to members, qualified names). * c-exp.y: Support exp.type::name and exp->type::name syntaxes. (Unfortunately, doesn't work for static members.) * c-exp.y, eval.c: Make type::~type work better. * eval.c (evaluate_subexp: OP_SCOPE): Replace use of value_static_field by value_struct_elt_for_reference. * eval.c (evaluate_subexp): Merge code for STRUCTOP_MEMBER and STRUCTOP_MPTR; cast arg1 to domain-type of arg2. * eval.c (evaluate_subexp): Remove special case for UNOP_ADDR for OP_SCOPE operand; no point in it now that we use lazy reading of values, and use "reference to member" objects. * gdbtypes.h: Clarify comment. * valops.c: Change value_struct_elt_for_address to return a reference (or variable), rather than a pointer. Change the name to value_struct_elt_for_reference to reflect this. Returning a reference instead of a address provides a generalization, since we can use the routine for both class::name as well as &class::name. Also, recurse to handle multiple inheritance properly. * valprint.c: Moved code to print pointer-to-members to new function point_class_member. This allows a "reference-to-member" to be printed using the same code. * valprint.c (type_print_varspec_prefix): Avoid printing "struct " for domains of class-member types. * valops.c (search_struct_field): Inline code for simplified version of value_static_field (which can then be deleted). * value.h: Rename value_struct_elt_for_address to value_struct_elt_for_reference. Delete value_static_field. * values.c: Remove no longer used function value_static_field. Thu Mar 19 13:54:11 1992 Fred Fish (fnf@cygnus.com) * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (coff_symfile_finish): Add function, prototype, and add to the xxxx_sym_fns struct for each file type. Also reformat the xxxx_sym_fns vector to a standard format and add comments. * coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c, elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read): Pass pointer to struct objfile rather than pointer to sym_fns. Change references inside each function accordingly. Allocate any symbol file specific info in the per-objfile memory region. * dbxread.c (free_and_init_header_files): Break function into free_header_files(), called from dbx_symfile_finish(), and init_header_files(), called from dbx_new_init(). * dbxread.c (dbx_new_init): Move deallocation things to new dbx_symfile_finish function. * elfread.c (elf_new_init): Call buildsym_new_init(). * objfiles.c (free_objfile): Call the appropriate symfile_finish() routine for the objfile before deallocating other stuff. * sparc-tdep.c (get_longjmp_target): Cast target_read_memory arg. * symfile.h: Move struct sym_fns to before struct objfile def. Add sym_finish function pointer and change prototypes of other function pointers to reflect passing struct objfile pointer rather than struct sym_fns pointer. * symfile.c: Remove now obsolete symtab_fns pointer. * symfile.c (symfile_init): Renamed to find_sym_fns, and now only locates the correct sym_fns struct for the given objfile. * symfile.c (syms_from_objfile, symbol_file_add): Restructured for better support of mapped symbol tables. * symfile.c (symbol_file_command): Remove obsolete code using symfile_fns. * symfile.h: Remove duplicate declarations for symfile_objfile, entry_point, and object_files. * target.c (target_info): Compare symfile_objfile to NULL. * xcoffread.c (aixcoff_new_init): Move deallocation stuff to aixcoff_symfile_finish(). Wed Mar 18 18:22:46 1992 Fred Fish (fnf@cygnus.com) * infrun.c (IN_SOLIB_TRAMPOLINE): Add default definition. * infrun.c (wait_for_inferior): Use IN_SOLIB_TRAMPOLINE. * tm-sysv4.h (IN_SOLIB_TRAMPOLINE): Add SVR4 definition. Wed Mar 18 15:51:15 1992 Per Bothner (bothner@cygnus.com) Some improvements to g++ debugging. * symtab.c (list_symbols): demangle before pattern matching. * symtab.c: Other fixes to improve handing of operators. * valprint.c (type_print_base): Fix test for constructor. * values.c (value_static_field): Allow evaluation of CLASS::METHOD, returning a function pointer. Wed Mar 18 08:39:52 1992 Fred Fish (fnf@cygnus.com) * Makefile.in (VERSION): Roll 4.4.6. * exec.c (exec_file_command): Add code to ignore optional args passed in by file_command() for use in symbol_file_command(). * main.c (main): Document -mapped and -readnow in help summary. * objfiles.c (open_mapped_file): Cosmetic change, arg renamed. * objfiles.c (allocate_objfile): Filename arg removed. Changes to get filename from bfd with bfd_get_filename(). Test mapto against 0, not NULL. Use mstrsave() to make copy of filename. * remote-mm.c (mm_load): Symbol_file_add() takes an additional arg. * remote-vx.c (vx_load_command, add_symbol_stub): Symbol_file_add() takes an additional arg. * solib.c (symbol_add_stub): Symbol_file_add() takes an additional arg. * symfile.c (symfile_open): Renamed to symfile_bfd_open and changed to return a bfd not an objfile pointer. * symfile.c (syms_from_objfile): Eliminate local copy of bfd. * symfile.c (symbol_file_add): Takes an additional arg (readnow). Change to eliminate local bfd and use symfile_bfd_open() plus allocate_objfile(). Add code to implement readnow option. * symfile.c (symbol_file_command): Changes to option handling, readnow functionality moved to symbol_file_add(). * symfile.c (symfile_init): Eliminate local copy of bfd. * symfile.c (add_symbol_file_command): Changes to parse mapped and readnow options. * symfile.h (allocate_objfile): Arg removed from prototype. * symtab.h (symbol_file_add): Arg added to prototype. * xcoffexec.c (map_vmap): Allocate_objfile() takes an additional arg. Sat Mar 14 16:38:47 1992 Fred Fish (fnf@cygnus.com) * gmalloc.c, gmalloc.h mcheck.c mmap-alloc.c mmap-sbrk.c mtrace.c, mtrace.awk, state.c, state.h: Removed. * .gdbinit: Add ../malloc, ../libiberty, and ../bfd to list of directories searched for source files. * Makefile.in (GNU_MALLOC, MALLOC_CFLAGS, MALLOCSRC): Removed * Makefile.in (MMALLOC_DIR, MMALLOC_DEP, MMALLOC_LIB, MMALLOC_DISABLE, MMALLOC_CHECK, MMALLOC_CFLAGS): Add * Makefile.in (CFLAGS): Replace MALLOC_CFLAGS with MMALLOC_CFLAGS. * Makefile.in (CLIBS, CDEPS): Add MMALLOC_LIB * Makefile.in (ADD_FILES, ADD_DEPS): Remove GNU_MALLOC. * Makefile.in (SFILES_MAINDIR): Remove stat.c mmap-alloc.c, mmap- sbrk.c * Makefile.in (HFILES): Remove state.h * Makefile.in (POSSLIBS_MAINDIR): Remove MALLOCSRC. * Makefile.in (OBS): Remove state.o mmap-alloc.o mmap-sbrk.o * Makefile.in (saber_gdb): Remove mcheck, mtrace. Add MMALLOC_DIR. * Makefile.in (clean): Remove all object files. * c-exp.y: Define malloc to xmalloc and realloc to xrealloc. * cplus-dem.c: Remove prototypes definitions that are now done in def.h. * dbxread.c (throughout): Change from using per-objfile xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree. * defs.h: Remove prototypes for mmap_* functions. Add prototypes for xmmalloc, xmrealloc, mfree, mmcheck, mmtrace, mmalloc_attach, mmalloc_detach, mmalloc_setkey, msavestring, and mstrsave, nomem. * depend: Remove dependencies for state.o, state.h. * dwarfread.c: Add declaration for warning_pre_print. * dwarfread.c (dwarfwarn): Use warning_pre_print. * dwarfread.c (throughout): Change from using per-objfile xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree. * gdbtypes.c (lookup_fundamental_type): Fix init_type calls to use supplied objfile. * i386-xdep.c (print_387_status): Change to use warning() rather than printfs. * i387-tdep.c (print_387_control_word): Change to use warning() rather than printfs. * infrun.c (wait_for_inferior): Remove unreachable abort() call that some compilers grumble about. * language.c (throughout): Add declaration for warning_pre_print and using warning() instead of printfs. * m2-exp.y: Define malloc to xmalloc and realloc to xrealloc. * main.c (main): Add declaration for warning_pre_print and set it similarly to error_pre_print. Add declarations for mapped_symbol_files and readnow_symbol_files. Add appropriate definitions to long_options[]. * minsyms.c: Trivial fix to comment. * objfiles.c (allocate_objfile): Substantially rewritten for using mapped symbol files. * objfiles.c (throughout): Change from using per-objfile xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree. * objfiles.c (open_mapped_file, mapped_to_address): Add functions. * source.c (throughout): Change from using per-objfile xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree. * source.c (open_source_file): Use mstrsave to save file name in mapped symbol region for objfile. * symfile.c: Remove include for state.h. include to local form. * symfile.c (symbol_file_add_digested): Remove. * symfile.c (symbol_file_add): Substantially rewritten for mapped symbol files. * symfile.h: Remove malloc/xrealloc/xmalloc/xrealloc/free members from objfile structure. Add malloc descriptor pointer (md). * symfile.h (OBJF_DUMPABLE): Changed name to OBJF_MAPPED. * symm-xdep.c (print_fpu_status): Use warning() rather than printfs. * symmisc.c (free_symtab_block): Now takes and uses current objfile pointer. * symmisc.c (throughout): Change from using per-objfile xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree. * symtab.c (cplus_mangled_symbol): Cast return value to avoid Sun compiler grumblings when PTR is char *. * symtab.c (lookup_symbol): Cast return value of iterate_over_ msymbols() to correct pointer type. * utils.c (warning_pre_print): Initialize to "\nwarning: ". * utils.c (fatal, fatal_dump_core): Ensure that the fatal error always starts on a line of it's own. * utils.c (init_malloc, malloc_botch, xmalloc, xrealloc): Rewrite for new mapped malloc package use. * utils.c (mmalloc, mrealloc, mfree): Stubs for configurations that don't want to use the mapped malloc package; pass arguments on to traditional malloc package functions. * utils.c (nomem): Add for fatal virtual memory exhausted aborts. * utils.c (xmmalloc, xmrealloc, xmalloc, xrealloc): Like mmalloc, mrealloc, malloc, and realloc but get fatal error if runs out of memory. * utils.c (msavestring, mstrsave): Save a string in a specific mapped malloc region. * utils.c (print_spaces): Use xmalloc to get the buffer. * xm-amix.h, xm-i386v4.h, xm-sun3os4.h, xm-sun4os4.h: Add defines for MMAP_BASE_ADDRESS and MMAP_INCREMENT. * config/i386v4.mh: Insignificant reorganization. Sat Mar 14 11:44:47 1992 Fred Fish (fnf@cygnus.com) * xcoffread.c: Only enable compilation of debugging functions if IBM6000 is defined. Fails to compile otherwise. Fri Mar 13 15:51:11 1992 K. Richard Pixley (rich@cygnus.com) * Makefile.in: pass MAKEINFO down on info. Fri Mar 13 12:56:36 1992 John Gilmore (gnu at cygnus.com) * mipsread.c (mipscoff_symfile_read): Eliminate a lot of useless code, including an lseek to an uninitialized variable. Reported by Jim Williams . Thu Mar 12 11:56:46 1992 Per Bothner (bothner@cygnus.com) Merged in patches from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik) (dated Fri, 6 Mar 92 17:51) for the rs6000. * minsyms.c, symfile.c: Changes that may be generally applicable, but are #ifdef IBM6000 for now. * rs6000-xdep.c: Fixed typo in comment. * rs6000-tdep.c: Non-substatial changes. * xoffread.c: The main change here is addition of some debugging functions. * xoffexec.c: More changes. * xcoffread.c: Fixed two too-few-parameters bugs. * solib.h, infrun.c, tm-rs6000.h: Add a PID parameter to SOLIB_CREATE_INFERIOR_HOOK macro. Sun Mar 8 21:17:48 1992 Fred Fish (fnf@cygnus.com) * symfile.h: Add prototype for iterate_over_msymbols(). * symtab.c (cplus_mangled_symbol): Add function. * symtab.c (lookup_symbol): Call cplus_mangled_symbol via iterate_over_msymbols to find demangled C++ symbol. * xcoffexec.c (relocate_minimal_symbol): Return meaningful value to iterate_over_msymbols(). * xcoffexec.c (vmap_symtab): Ignore return from iterate_over_ msymbols(). Fri Mar 6 21:59:34 1992 K. Richard Pixley (rich@cygnus.com) * Makefile.in: added check target. Thu Mar 5 23:56:01 1992 John Gilmore (gnu at cygnus.com) * ecoff.c: Move to ../bfd/coff-msym.c. * config/mt-*mips: Remove ecoff.o from the configuration. * remote.c (): Add newline to initial +. (remote_resume): Mention how to cope with signals. (remote_interrupt): Add debug msg. (remote-wait): Implement new 'T' reply, which includes status, PC, and FP all in a single short message. (putpkt): Add further debugging of packet acks. * mipsread.c (fixup_symtab): Also swap RFD's. (parse_partial_symbols): Avoid bug on unknown symbol types. * Makefile.in (VERSION): Roll to 4.4.5. * mips-tdep.c (heuristic_proc_start): Avoid long delays for remote MIPS by limiting heuristic to 200 byte search. (heuristic_proc_desc): Byte-swapping. (mips_print_register): Cope with failure of read_relative_register_raw_bytes. Byte-swap integers for printing. * mips-pinsn.c (print_insn): Byte-swap instruction. Thu Mar 5 12:32:09 1992 Stu Grossman (grossman at cygnus.com) * config.sub configure.in config/.Sanitize config/mh-irix4 gdb/.Sanitize gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c gdb/procfs.c gdb/signame.h gdb/tm-irix3.h gdb/tm-mips.h gdb/xm-irix4.h gdb/config/.Sanitize gdb/config/mt-irix3 gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x. Wed Mar 4 11:56:42 1992 Fred Fish (fnf@cygnus.com) * defs.h, utils.c: xrealloc takes PTR as first arg. * defs.h: Reword confusing comment about ANSI prototypes. * defs.h: Some minor whitespace changes. * infrun.c (wait_for_inferior): Compare int tmp to int 0, not NULL, which can be (void *). * tm-amix.h, tm-i386v4.h: Add defines for setjmp/longjmp handling. * tm-i386v.h (SP_ARG0): Define * xm-sysv4.h: Back out of change for missing prototypes. * i386-tdep.c (get_longjmp_target): Add function. Wed Mar 4 05:46:11 1992 K. Richard Pixley (rich@rtl.cygnus.com) * Makefile.in: install man page too. Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com) * All GDB files that #include defs.h: Removed stdio.h. (defs.h): #include stdio.h. Mon Mar 2 23:00:12 1992 Steve Chamberlain (sac@thepub.cygnus.com) * gdbtypes.c (lookup_pointer_type): initialize the TYPE_LENGTH of a ptype to reflect the setting of TARGET_PTR_BIT. Set the TYPE_FLAGS of a ptype to TYPE_FLAG_UNSIGNED. * tm-h8300.h, h8300-tdep.c, remote-hms.c: personal checkpoint * printcmd.c (print_address): if ADDR_BITS_REMOVE is defined, use it before printing out the hex shape of an address. Sun Mar 1 17:41:09 1992 Per Bothner (bothner@cygnus.com) * rs6000-xdep.c (frame_initial_stack_address): Move code to set frame->cache_fsr into new separate function frame_get_cacahe_fsr. This allows fixing a fatal error. * xcoffexec.c: Turn previously suppressed error message back on, after cleaning up BFD. * breakpoint.c (breakpoint_re_set): Removed (at least for now) printing of blank line, since it cases printing of an extra blank line. Is this intended? It does mess up gdb test suite. * defs.h: Put back declarations of malloc and realloc, but protected by #ifndef MALLOC_INCOMPATIBLE. * objfiles.c: Undo previous change: Use malloc/realloc for objfile malloc/realloc fields (but add a cast). * xcoffexec.c: Suppress an error message (for now). Sat Feb 29 14:43:02 1992 Per Bothner (bothner@cygnus.com) Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik) [Mail dated Fri, 21 Feb 92 13:14:54 -0800] * buildsym.c: Use smash_to_pointer_type() to handle forward type references. * xcoffread.c: Modifications to C_DECL storage class handling, and introduction of an old smash_to_pointer_type() routine. Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik) [Mail dated Thu, 20 Feb 92 13:57:16 -0800] * rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h: function_frame_info() parameters have been modified. Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik) [Mail dated Thu, 20 Feb 92 10:10:05 -0800] * rs6000-tdep.c: Before Feb 5 92, register_valid[] array was not used, and fetch_inferior_registers() always fetched all the registers resulting valid register values at hand all the time. Pushing a dummy frame did not require validating all register values first. After putting the above mechanism into action, we didn't have valid registers values always ready. Thus, all registers need to be fetched before pushing a dummy frame now. Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik) [Mail dated Thu, 13 Feb 92 16:22:44 -0800] * rs6000-xdep.c: frame_initial_stack_address() function to calculate the starting address (actual frame address) of a frame. * rs6000-tdep.c: modifications to function_frame_info() to see if function reserves a frame pointer register (alloca register) * tm-rs6000.h: EXTRA_FRAME_INFO, FRAME_ARGS_ADDRESS and FRAME_LOCALS_ADDRESS has been updated to support debugging of functions with alloca() calls. Sun Mar 1 13:13:39 1992 Fred Fish (fnf@cygnus.com) * xm-sysv4.h: Provide definitions/prototypes for host environment functions for which no definitions or prototypes are provided in any currently included gdb or host environment header files. For SVR4, this currently includes malloc and realloc, which cannot be portably prototyped in any gdb include file. Sat Feb 29 14:43:02 1992 Per Bothner (bothner@cygnus.com) * buildsym.h: Remove obsolete variable file_stabs. * Makefile.in: Move place where configure merges in host- and target-dependent fragments later, so the latter can override (say) GNU_MALLOC. * config/mh-rs6000: Use system malloc. Otherwise, I ended up with *two* incompatible versions of malloc (functions in libc would call the malloc in libc). I assume this is a shared library problem. * remote.c: Fix (presumed) typo. * objfiles.c: Use xmalloc/xrealloc instead of malloc/realloc (since the latter are no longer declared). Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik) [Mail dated Thu, 6 Feb 1992 10:22:02 -0800] * rs6000-xdep.c: Improvements to fetch_inferior_registers() to handle individual registers. * tm-rs6000.h: Fix SAVED_PC_AFTER_CALL macro to handle pc value correctly in case it wasn't cached yet. (A problem showed up after fetching individual registers.) * buildsym.c: Disable type_synonym_name's type name overwriting in cases it is unnecesary. rs6000 portation doesn't use type_synonym_name, and it used to nullify type names * xcoffread.c: to handle g++'s typename abbreviation, fill in a type's name as soon as space for that type is allocated. * xcoffread.c: ignore a section's lineno information if it is not `.text'. (In rs6000 bfd portation integration, skipping over `.pad' sections are ignored since it was in machine independent part of the code. Thus, a problem of fake sections with invalid lineno information arised.) Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik) [Mail dated Thu, 6 Feb 1992 13:26:22 -0800] * rs6000-tdep.c: make function_frame_info() work whether or not reading from a core file. * tm-rs6000.h: Implementation of FRAME_FIND_SAVED_REGS macro. * infrun.c. main.c, printcmd.c. symtab.c: More changes from IBM for rs6000. Thu Feb 27 22:57:19 1992 Per Bothner (bothner@cygnus.com) * rs6k-opcode.h, tm-rs6000.h, xm-rs6000.h, rs6000-tdep.c, rs6000-xdep.c, xcoffexec.c, xcoffread.c: Merge in changes (mostly from IBM) for RS6000. * breakpoint.c, buildsym.c, infptrace.c, stack.c, symtab.c: More changes from IBM for RS6000. These are in machine- independent code, and probably could do with some cleaning up. The most questionable of these are #ifdef IBM6000. * infrun.c, sparc-tdep.c: Pass a parameter (signal number) to single_step() (for consistency with rs6000 and i860). * utils.c: Allow the 1st arg to xrealloc to be NULL (in which case do malloc). This removes the need for some tests in xcoff code (and perhaps other places?). * coffread.c: Removed variables last_source_file, type_vector, and type_vector_length as these are now defined by buildsym.[ch]. * defs.h: Remove prototypes for malloc and realloc, since these should only be used to implement xmalloc and xrealloc, and they conflict with in AIX - where they return void* even when __STDC__ isn't defined. Sigh. * munch: Recognize *initialize* in data as well as text (AIX uses data). Also, incorporate a patch from Garrett Wollman to make the sed script much more sensible, by only trying to match the name of the initialize_foo function, and not the junk before it. Thu Feb 27 20:07:43 1992 Stu Grossman (grossman at cygnus.com) * breakpoint.c (breakpoint_re_set_one): Don't reset breakpoint unless symbol table indicates that something has changed. Thu Feb 27 11:48:47 1992 John Gilmore (gnu at cygnus.com) * remote.c: Make it work for embedded MIPS. Increase buffer size, and use throughout. Round buffer size up if too many regs. Support baud rate setting and try for an 8-bit path. If interrupted while waiting for target, send a ^C down the wire. Avoid single-byte reads. * tm-mips.h: Add more embedded-system registers to REGISTER_NAMES and NUM_REGS. * mips-xdep.h: Avoid the embedded regs when on Unix. * mipsread.c: Byte-swap the symbol table structures, using routines from ecoff.c, to read a symbol table written in any of the four possible byte orders. * configure.in (mips-big-* target): Same as Sony News. * config/mt-bigmips, config/mt-littlemips: Add ecoff.o. * ecoff.c: New file for symbol swapping routines. Thu Feb 27 09:26:38 1992 Stu Grossman (grossman at cygnus.com) * breakpoint.c (all_breakpoints_info, breakpoint_1): Add 'info all-breakpoints' command. * (get_number): Allow users to enter negative breakpoint numbers. * (breakpoint_1): Reformat display of 'info break' to show new fields. * (create_longjmp_breakpoint, breakpoint_re_set, breakpoint_re_set_one, enable/disable_longjmp_breakpoint), symfile.c (syms_from_objfile): Re-do insertion of longjmp breakpoints. Move all code into breakpoint_re_set, and call that instead of create_longjmp_breakpoint in symfile.c. Thu Feb 27 06:11:05 1992 John Gilmore (gnu at cygnus.com) * breakpoint.h (ALL_BREAKPOINTS_SAFE): Add. * breakpoint.c (breakpoint_re_set): Use ALL_BREAKPOINTS_SAFE. * symtab.c (find_pc_symtab): Handle having no objfiles. * infcmd.c: Fix comment. * objfiles.c (free_all_objfiles): Add. * symfile.h (ALL_OBJFILES, ALL_OBJFILES_SAFE): Add. * symfile.c (symbol_file_command): free all objfiles when specifying a new symbol file. (reread_symbols): Stat the file name, don't fstat the descriptor. Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com) * Makefile.in, configure.in: removed traces of namesubdir, -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced copyrights to '92, changed some from Cygnus to FSF. Tue Feb 25 19:31:19 1992 Stu Grossman (grossman at cygnus.com) * dbxread.c (end_psymtab): Delete empty psymtabs. * symfile.c (allocate_psymtab): Recycle empty psymtabs. * symfile.h (struct objfile): Add free_psymtabs. Sat Feb 22 02:00:32 1992 John Gilmore (gnu at cygnus.com) * Makefile.in (VERSION): Roll to gdb-4.4.4. * symfile.c (symbol_file_command): strcmp => !strcmp. * breakpoint.h: Move prototypes to follow enum definition they need. * breakpoint.c, infrun.c: Lint. * printcmd.c: Use `enum enable' rather than `enum display_status'. * mipsread.c: First pass at making it compile with the new objfile changes. Probably seriously broken still, but it compiles. FIXME. Sat Feb 22 00:56:39 1992 Stu Grossman (grossman at cygnus.com) * infrun.c, infcmd.c, breakpoint.c, main.c, symfile.c, breakpoint.h, tm-sun4os4.h, tm-sparc.h, sparc-tdep.c, tm-mips.h, mips-tdep.h, tm-sun3.h, tm-68k.h, m68k-tdep.h: Add support for stepping (and nexting) through longjmp(). Also, cleanup breakpoint handling quite a bit by creating explicit breakpoint types instead of using magic breakpoint numbers. Makefile.in: Update version to 4.4.3 Sat Feb 22 00:08:50 1992 John Gilmore (gnu at cygnus.com) * buildsym.c, dwarfread.c, gdbtypes.c, inflow.c, main.c, minsyms.c, printcmd.c, remote.c, saber.suppress: Saberlint. * symmisc.c, xcoffread.c: Move debug functions to symmisc.c. * xm-sun3os4.h, xm-sun4os4.h: Enable HAVE_MMAP. * minsyms.c (install_minimal_symbols): Add bunches to any existing minsyms in the objfile. Avoid extra mallocation by working directly in the obstack. Remove ignored `mainline' parm. * coffread.c, dbxread.c, elfread.c, mipsread.c, solib.c, symtab.h, xcoffread.c: Change all callers. * FIXME: We should be able to eliminate MAINLINE from all the symbol readers now, with a small bit of work. * valops.c, value.h: Lint. * remote-vx.c: Add missing break; statement. Bugfix by Michael Sclafani, . Fri Feb 21 17:29:54 1992 Fred Fish (fnf at cygnus.com) * Makefile.in (VERSION): Update version to 4.4.2 * Makefile.in (SFILES_MAINDIR): Add gdbtypes.c, state.c, objfiles.c, minsyms.c, mmap-alloc.c, mmap-sbrk.c * Makefile.in (HFILES): Add gdbtypes.h, state.h, solib.h * Makefile.in (OBS): Add gdbtypes.o, state.o, objfiles.o, minsyms.o, mmap-alloc.o, mmap-sbrk.o * altos-xdep.c: Minor whitespace change. * am29k-tdep.c (examine_prologue): Convert from misc function vector use to new minimal symbol table use. * arm-xdep.c (fetch_inferior_registers): Document unused argument. * arm-xdep.c (store_inferior_registers): Returns void. * blockframe.c (get_pc_function_start, find_pc_partial_function): Convert from misc function vector use to new minimal symbol table use. Remove find_pc_misc_function(). Ifdef out block_innermost_frame(). * breakpoint.c: Add prototypes for local functions. * breakpoint.c (catch_command_1): Change to static and remove unused local "pc". * breakpoint.c (map_breakpoint_numbers): Prototype arg "function". * breakpoint.h: Change function decls to prototype form. * buildsym.c: Add prototypes for local functions. * buildsym.c: Moved hashname() function here from dbxread.c. * buildsym.c (dbx_lookup_type): Cast args to xrealloc(). * buildsym.c: Remove dbx_create_type(), uses changed to alloc_type(). * buildsym.c (dbx_alloc_type): Change to static. * buildsym.c (finish_block): Add objfile parameter. * buildsym.c (misc): Change symbol_obstack to objfile version. * buildsym.c (make_blockvector): Change to static. * buildsym.c (start_subfile): Use strdup instead of obsavestring. * buildsym.c (compare_line_numbers): Change to static, args are const, cast args when used. * buildsym.c (start_symtab): Inline new_object_header_files() call. * buildsym.c (patch_block_stabs): Moved to this file from xcoffread and made static. Add objfile parameter. * buildsym.c (end_symtab): Simplify code using line table size. Realloc the linetable on the objfile symbol_obstack and copy there. * buildsym.c (scan_file_globals): Convert from misc function vector use to new minimal symbol use. * buildsym.c (define_symbol): Add objfile parameter. Make sure strings get allocated in objfile's symbol_obstack. Convert references to builtin types to lookup_fundamental_type(). * buildsym.c (read_type): Make static, add objfile parameter, convert references to buildin types to lookup_fundamental_type(). * buildsym.c (read_struct_type): Add objfile parameter. * buildsym.c (read_array_type): Make static, add objfile parameter. * buildsym.c (read_enum_type): Make static, add objfile parameter. * buildsym.c (read_huge_number): Make static. * buildsym.c (read_range_type): Make static, add objfile parameter, convert references to buildin types to lookup_fundamental_type (). * buildsym.c (read_args): Make static, add objfile parameter. * buildsym.h: Convert function decl's to prototype form. * c-exp.y: Add prototypes for local functions, convert uses of misc function vector to minimal symbol table. Reformat all builtin type initializations and pass a NULL objfile to init_type() for them. * coffread.c: Change context_stack ref's to coff_context_stack, add local function prototypes. Cast uses of xrealloc arg 1. * coffread.c (coff_alloc_type): Call alloc_type instead of hand- crafting a new type. * coffread.c (add_symbol_to_list): Change to coff_add_symbol_to_list. * coffread.c (finish_block): Change name to coff_finish_block. * coffread.c (make_blockvector): Add and use objfile parameter. * coffread.c (record_line): Change name to coff_record_line. * coffread.c (start_symtab): Change name to coff_start_symtab. * coffread.c (end_symtab): Change name to coff_end_symtab. * coffread.c (record_misc_function): Change name to record_minimal_ symbol and change to minimal symbol table use from misc func tbl. * coffread.c (coff_symfile_read): Convert from misc function vector use to minimal symbol table use. * coffread.c (hashname): Remove; use common version in buildsym.c. * coffread.c (decode_base_type): Change references to builtin types to calls to lookup_fundamental_type(). * coffread.c (read_struct_type): Change name to coff_read_struct_type. * coffread.c (read_enum_type): Change name to coff_read_enum_type. * command.c: Add prototypes for local functions. * command.c (add_cmd): Prototype the 'fun' parameter and use the appropriate member of the function union for that type. * command.c (add_abbrev_cmd): Prototype the 'fun' parameter and ifdef out the function since it isn't currently used. * command.c (add_alias_cmd): Pass correct function type to add_cmd. * command.c (add_prefix_cmd): Prototype the 'fun' parameter. * command.c (add_abbrev_prefix_cmd): Prototype the 'fun' parameter. * command.c (help_cmd): Compare function pointer to NULL. * command.c (help_cmd_list): Compare function pointer to NULL. * command.c (lookup_cmd_1): Use correct member of function union. * command.c (undef_cmd_error): Make static. * command.c (complete_on_cmdlist): Use correct member of func union. * command.c (do_setshow_command): Use correct member of func union. * command.c (shell_escape): Convert rindex use to strrchr. * command.h (COMMAND_H): Define if already included. * command.h (cmd_list_element struct): Change 'function' to a union and prototype args. Prototype completer function. * command.h: Convert decl's to prototype form. * convex-xdep.c (store_inferior_registers): Returns void. * copying.c: Prototype local functions. * coredep.c: Minor whitespace change. * cplus-dem.c: Remove hack to use BSD equivalents of mem* and str*. * cplus-dem.c: Prototype local functions. * dbxread.c (hashname): Remove; moved to buildsym.c. * dbxread.c (free_and_init_header_files): Make static. * dbxread.c: Add prototypes for local functions. * dbxread.c (new_object_header_files): Remove; inlined usages. * dbxread.c (xrealloc usages): Cast args. * dbxread.c (record_misc_function): Change to record_minimal_symbol and change usages accordingly. * dbxread.c (static_psymbols usages): Change to use per-objfile copy. * dbxread.c (xmalloc usages): Use per-objfile copy when appropriate. * dbxread.c (dbx_next_symbol_text): Make static. * dbxread.c (init_psymbol_list): Convert to use per-objfile data. * dbxread.c (init_bincl_list): Add and use objfile parameter. * dbxread.c (free_bincl_list): Add and use objfile parameter. * dbxread.c (compare_psymbols): Remove; use common symfile.c version. * dbxread.c (end_psymtab): Convert to use per-objfile data. * dwarfread.c (DEFUN/EXFUN): Remove all usages. Use PARAMS for prototypes. * dwarfread.c (record_misc_function): Change name to record_minimal_ symbol and use minimal symbol table throughout. * dwarfread.c (compare_psymbols): Remove; use common symtab.c version. * dwarfread.c: Convert all references to builtin types to use the new lookup_fundamental_type function. * dwarfread.c (read_enumeration): Add and use objfile parameter. * elfread.c (DEFUN/EXFUN): Remove all usages. Use PARAMS for proto- types. * elfread.c (record_misc_function): Convert to use record_minimal_ symbol. * elfread.c (elf_symtab_read): Add objfile parameter. * eval.c: Add prototypes for local functions and move some decls around to accomodate prototypes. * expprint.c: Add prototypes for local functions. Change references to misc function vector to minimal symbol table. * findvar.c (read_memory usages): Cast args. * gdbtypes.h: New file, type info from symfile.h and symtab.h. * gmalloc.c: Use NOARGS where prototypes used hardwired void. * gmalloc.c (BLOCKSIZE): Constant to be shifted is unsigned. * gmalloc.h: Use NOARGS where prototypes used hardwired void. * gould-xdep.c: Minor whitespace change. * hp300ux-xdep.c (fetch_inferior_registers): Remove unused regno var. * hp300ux-xdep.c (store_inferior_registers): Returns void. * hp300ux-xdep.c (fetch_core_registers): Takes unused arg reg_addr. * i386-stub.c: Add prototypes, change "volatile" to NORETURN. * i386-tdep.c: Add prototypes for local functions. * i386-tdep.c (codestream_fill, codestream_seek, codestream_read, i386_get_frame_setup, i386_skip_prologue): Explicitly declare params that defaulted to int. * i386-tdep.c (i386_follow_jump, i386_frame_find_saved_regs, i386_push_dummy_frame): Returns void. * i386-xdep.c (i386_register_u_addr): Declare params that default to int and explicitly declare return type as int. * i387-tdep.c: Minor formatting changes. * i960-tdep.c (leafproc_return): Convert from misc function vector use to minimal symbol table use. * infcmd.c: Add prototypes for local functions. * infcmd.c (continue_command, until_next_command, until_command, path_info, path_command): Make static. * infcmd.c (step_1, until_next_command): Convert from misc func vector to minimal symbol table use. * inflow.c: Add prototypes for local functions. * infptrace.c (store_inferior_registers): Returns void, not int. * language.c (_initialize_language): Use proper member of function union. * m2-exp.y: Add prototypes for local functions, convert misc function vector uses to minimal symbol table uses. * m2-exp.y (make_qualname, yyerror): Make static. * m2-exp.y (_initialize_m2_exp): Call init_types with NULL objfile. * m68k-pinsn.c: Add prototypes for local functions. * m68k-pinsn.c (print_insn): Cast args to read_memory. * m68k-pinsn.c (fetch_arg): Make parameter 'code' and int. * m68k-stub.c: Add prototypes. * m88k-pinsn.c (sprint_address): Convert from misc function vector use to minimal symbol table use. * m88k-xdep.c (fetch_inferior_registers): Takes an unused parameter. * m88k-xdep.c (store_inferior_registers): Returns void. * mach386-xdep.c (fetch_inferior_registers): Takes an unused param. * mach386-xdep.c (store_inferior_registers): Returns void. * mach386-xdep.c (fetch_core_registers): Takes an unused parameter. * main.c: Add prototypes for local functions. * main.c (return_to_top_level): Is type NORETURN (volatile). Cast longjmp() result to (NORETURN void). * main.c (catch_errors): Prototype the 'func' parameter. * main.c (disconnect, stop_sig, do_nothin, float_handler): Takes an unused arg. * main.c (execute_command): Call the right member of the func union. * main.c (command_loop_marker, symbol_completion_function, command_loop): Make static. * main.c (command_line_input): Make linelength unsigned, cast arg to command_line_input(). * main.c (add_info, add_com): Prototype the 'fun' parameter. * main.c (initialize_main): Call right member of function union. * mcheck.c (NOARGS): Change hardwired void in prototypes to NOARGS. * mem-break.c: Include symtab.h * mips-xdep.c (fetch_inferior_registers): Takes unused param. * mips-xdep.c (store_inferior_registers): Returns void. * mipsread.c (mipscoff_symfile_read): Change from misc function vector use to minimal symbol table use. * mipsread.c (symbol_obstack usages): Convert all to use per-objfile version. * mipsread.c (make_type): Remove, convert usages to init_type. * mipsread.c (_initialize_mipsread): Call init_type with NULL objfile. * nindy-tdep.c (nindy_frame_chain_valid): Convert from misc function vector use to minimal symbol table use. * parse.c: Add prototypes for local functions. * parse.c (xrealloc usages): Cast args. * parse.c (prefixify_expression, length_of_subexp): Make static. * parser-defs.h (PARSER_DEFS_H): Define when first included. * parser-defs.h: Convert function decls to prototype form. * partial-stab.h: Convert from misc function vector use to new minimal symbol table use. * partial-stab.h (global_psymbols, static_psymbols usages): Reference the per-objfile copies. * printcmd.c: Add prototypes for local functions. Move some struct definitions around to accomodate prototypes. * printcmd.c (decode_format): Make static, change args oformat and osize to int from char. * printcmd.c (print_formatted): Change 'format' and 'size' to int. * printcmd.c (print_scalar_formatted): Change arg 'format' to int. * printcmd.c (print_address_symbolic): Convert from misc function vector use to minimal symbol table use. * printcmd.c (address_info): Convert from misc function vector use to minimal symbol table use. * printcmd.c (delete_display, enable_display, disable_display_command): Make static. * procfs.c (EXFUN/DEFUN): Remove all usages, convert to PARAM. * procfs.c (fetch_core_registers): Add unused param reg_addr. * pyr-xdep.c (fetch_inferior_registers): Add unused param regno. * pyr-xdep.c (store_inferior_registers): Returns void. * remote-mm.c (mm_load): symbol_file_add return value unused. * remote-nindy.c: Minor format change. * remote-vx.c (vx_load_command): symbol_file_add result unused. * rs6000-xdep.c (fetch_inferior_registers): Add unused param regno. * rs6000-xdep.c (store_inferior_registers): Returns void. * rs6000-xdep.c (fetch_core_registers): add unused param reg_addr * rs6000-xdep.c (aixcoff_relocate_symtab): Convert from misc function vector use to minimal symbol table use. * solib.c: Add prototypes for local functions. * solib.c (solib_add_common_symbols, locate_base): Convert from misc function vector use to minimal symbol table use. * solib.c (EXFUN/DEFUN): Remove all usages, convert to PARAM. * solib.c (find_solib, shared_library_command): Make static * solib.c (read_memory, write_memory usages): Cast args. * solib.c (special_symbol_handling): Add function * source.c: Add prototypes for local functions. * source.c (select_source_symtab): Convert to scan objfiles. * source.c (open_source_file): Make static. * source.c (xrealloc usages): Cast args. * source.c (source_line_charpos): ifdef out, unused. * source.c (get_filename_and_charpos): Make static. * stack.c: Add prototypes for local functions. * stack.c (print_frame_info, frame_info): Convert from misc function vector use to minimal symbol table use. * symfile.c: Add prototypes for local functions. * symfile.c (compare_symbols): Make args const PTR's. * symfile.c (compare_psymbols, sort_pst_symbols) add. * symfile.c (sort_all_symtab_syms): Scan objfile list. * symfile.c (obsavestring): Add objfile parameter. * symfile.c (init_misc_bunches, prim_record_misc_function, compare_misc_functions, discard_misc_bunches, condense_misc_bunches, sort_misc_function_vector, compact_misc_function_vector): Remove * symfile.c (symbol_file_add_digested): Add function. * symfile.c (symbol_file_add): Returns struct objfile *. * symfile.c (symbol_file_command): Modify for state file use. * symfile.c (symfile_open): Add parameter "dumpable". * symfile.c (allocate_objfile, free_objfile): Moved to objfiles.c * symfile.c (load_command, add_symbol_file_command): Make static. * symfile.c (fill_in_vptr_fieldno): Moved to gdbtypes.c * symfile.c (rindex usages): Converted to strrchr. * symfile.c (allocate_psymtab): New * symfile.c (free_named_symtabs): Ifdef out code that needs to be converted to minimal symbol table usage, but no obvious conversion. * symfile.c (free_all_symtabs): Remove. * symfile.c (_initialize_symfile): Use per-objfile info. * symfile.h: Rework the objfile structure to add per-objfile data objects (psymbol_obstack, symbol_obstack, type_obstack, global_psymbols, static_psymbols, msymbols, minimal_symbol_count, fundamental_types, malloc, realloc, free, xmalloc, xrealloc, etc). Add prototypes to function declarations. * symm-tdep.c (symmetry_extract_return_value): Convert from misc function vector usage to minimal symbol table usage. * symmisc.c (DEV_TTY): Define if not defined. * symmisc.c: Add local function prototypes. * symmisc.c (dump_objfile, dump_msymbols, dump-symtab, print_syms, printpsyms_command, print_objfiles, print_objfiles_command): Rework to use iterate_over_* * symtab.c: Add prototypes for local functions. * symtab.c (lookup_symtab_1): Convert to look through objfiles. * symtab.c (lookup_partial_symtab): Scan through objfiles. * symtab.c (lookup_primitive_typename, lookup_typename, lookup_ unsigned_typename, lookup_struct, lookup_union, lookup_enum, lookup_template_type, lookup_struct_elt_type, lookup_pointer_type, lookup_reference_type, lookup_member_type, allocate_stub_method, check_stub_method, create_array_type, smash_to_member_type,): Moved to gdbtypes.c * symtab.c (lookup_symbol): Some args are const. * symtab.h: All type related defs and structs moved to gdbtypes.h * symtab.h: Convert decls to prototypes. * target.c (noprocess): Make static. * target.h: Change decl's to prototypes. * tm-sunos.h: (CLEAR_SOLIB, SOLIB_ADD, SOLIB_CREATE_INFERIOR_HOOK, DISABLE_UNSETTABLE_BREAK) Moved to solib.h. * utils.c (_initialize_utils): Use correct member of function union. * valarith.c: include gdbtypes.h * valops.c: include gdbtypes.h, add prototypes for local functions. * valops.c (value_push, value_arg_push, find_function_addr): Make static. * valops.c (value_string): Convert from misc function vector use to minimal symbol table use. * valops.c (check_field_in): Make arg const. * valprint.c: Add prototypes for local functions. * valprint.c (print_string): Make static * valprint.c (value_print, val_print_fields, val_print): Make arg int. * values.c: Add prototypes for local functions. * values.c (value_headof): Convert from misc function vector to minimal symbol table. * xcoffexec.c: Add prototypes for local functions. * xcoffexec.c (exec_close, file_command, add_to_section_table): Make static. * xcoffexec.c (relocate_minimal_symbol): Add. * xcoffread.c (patch_block_stabs): Moved to buildsyms.c. * xcoffread.c: Add prototypes for local functions. * xcoffread.c (sort_syms): Convert to scan objfiles. * xcoffread.c (read_xcoff_symtab): Make static. * xcoffread.c (various): Replace references to builtin types with calls to lookup_fundamental_type. Replace references to symbol_obstack and psymbol_obstack with pointers to the per-objfile copies. * xcoffread.c (dump_linetable, dump_type, dump_symbol, dump_namespace, dump_block, dump_blockvector, dump_last_symtab, dump_symtabs): Make static. * xcoffread.c (init_stringtab): Add objfile parameter. * gdbtypes.c: New file * minsyms.c: New file * mmap-alloc.c: New file * mmap-sbrk.c: New file * objfiles.c: New file * state.c: New file * state.h: New file Fri Feb 21 17:29:54 1992 John Gilmore (gnu at cygnus.com) * Check in Fred Fish's changes in these modules. Fred will make ChangeLog entries for all of them. Update VERSION to 4.4.2. Thu Feb 20 18:10:17 1992 Fred Fish (fnf at cygnus.com) * tm-sparc.h, tm-sysv4.h, solib.h: Move shared lib definitions into solib.h. * sparc-pinsn.c, sparc-tdep.c, standalonec, sun3-xdep.c, sun386-xdep.c, symm-xdep.c, target.c, ultra3-xdep.c, utils.c, value.h: Prototypes for static functions; lint. * gdbtypes.h: Empty file to ease transition. Thu Feb 20 16:43:13 1992 Fred Fish (fnf at cygnus.com) * environ.h, expression.h, frame.h, gdbcmd.h, gdbcore.h, inferior.h, language.h, signame.h, target.h, terminal.h, tm-68k.h, tm-i386v.h, tm-sparc.h, tm-sun386.h, tm-symmetry.h, xm-i386v.h, xm-sparc.h: Prototypes for all external functions. Lint. * core.c, exec.c, infrun.c, inftarg.c, language.c, remote.c, signame.c, sparc-xdep.c: Prototypes for all static functions. Lint. * core.c, eval.c, exec.c, inftarg.c, remote-adapt.c, remote-eb.c, remote-hms.c, remote-mm.c, remote-nindy.c, remote-vx.c, remote.c, target.c, target.h, valarith.c, valops.c, value.h, xcoffexec.c: Remove to_call_function and target_call_function, since it always calls the same thing (call_function_by_hand). * core.c, exec.c, solib.c: Rename target_ops sections => to_sections, etc. * infcmd.c, inflow.c, infptrace.c, infrun.c, main.c, target.c, target.h: target_kill takes no args. * language.c (language_info): Scaffolding to allow briefer messages when the current language changes. FIXME. * xm-amix.h, xm-i386v4.h, xm-stratus.h: Define NORETURN to avoid complaints about volatile functions. * xm-sysv4.h (HAVE_MMAP): Define. Thu Feb 20 09:04:18 1992 Fred Fish (fnf at cygnus.com) * defs.h: Include ansidecl.h and PARAMS macro. Use PARAMS to make prototypes for all functions declared here. * cplus-dem.c: Avoid declaring xmalloc and xrealloc. * c-exp.y: Rename SIGNED, OR, and AND to avoid conflict. * environ.c: Include before defs.h. Minor cleanup. * ieee-float.h: Use PARAMS for prototypes; make some params const. * ieee-float.c, valarith.c: Include . Lint. b*=>mem*. * m2-exp.y: Remove unused CONST; Rename OR and AND. * utils.c: Avoid declaring malloc and realloc. Lint. (request_quit): Accept signal-number parameter. Mon Feb 17 07:13:27 1992 Fred Fish (fnf at cygnus.com) * dwarfread.c (process_dies): Add case to handle TAG_pointer_type DIE's. Add new function read_tag_pointer_type() to read them. * dwarfread.c (dwarf_read_array_type, read_subroutine_type): When creating a new user defined type, check to see if a partial type already exists, and if so, bash it to fit. Fri Feb 14 19:00:17 1992 John Gilmore (gnu at cygnus.com) * coffread.c (decode_base_type): Pass long, not union. Fix by Eric Valette, ev@chorus.fr. Thu Feb 13 17:14:28 1992 Fred Fish (fnf at cygnus.com) * elfread.c (elf_symtab_read): Fix code to correctly track changes in bfd for absolute symbols. Thu Feb 13 12:43:29 1992 Stu Grossman (grossman at cygnus.com) * xm-vaxbsd.h: Close off comment. Thu Feb 13 07:45:19 1992 Fred Fish (fnf at cygnus.com) * xm-sysv4.h: Define NEED_POSIX_SETPGID. Fri Feb 7 11:51:12 1992 Per Bothner (bothner at cygnus.com) * mips-tdep.c (mips_print_registers): Print correct register number for double pseudo-registers. Fri Feb 7 07:56:05 1992 John Gilmore (gnu at cygnus.com) * buildsym.c (read_struct_type): Avoid double-bump of parse ptr in the op$::OPERATOR. case. From Steven McCanne, . * exec.c (set_section_name): Pass arg to exec_files_info; only call it if interactive. From Francis Kauth . Thu Feb 6 17:41:32 1992 John Gilmore (gnu at cygnus.com) * main.c (print_gdb_version): Copyright msg: only this year. (cd_command): Avoid changing current_directory on error. Thu Feb 6 15:14:01 1992 Per Bothner (bothner at cygnus.com) * mipsread.c (parse_partial_symbols): Handle dependencies between partial symbol tables (when not doing stabs-in-ecoff). (This used to be handled by parse_fdr, but parse_fdr was incompatible with handling stabs-in-ecoff, so the code was re-written to not use parse_fdr. Unfortunately, the logic to handle dependencies was overlooked.) Thu Feb 6 11:51:39 1992 Steve Chamberlain (sac at rtl.cygnus.com) * coffread.c (read_enum_type): Use the size of a target int when describing enum. * defs.h: added new #define for TARGET_PTR_BIT, defaults to size of target int. * h8300-tdep.c, remote-hms.c, tm-h8300.h: too many changes to count * symtab.c (lookup_reference_type, lookup_ptr_type): use TARGET_PTR_BIT to determine size of a pointer * values.c (unpack_long): when unpacking a REF or a PTR don't assume the size of the type. Wed Feb 5 22:29:59 1992 John Gilmore (gnu at cygnus.com) * mipsread.c (parse_symbol): Avoid clobbering enum pointer when looking at its members. Improve guess between struct and union, only assuming union if multiple members have offsets of zero. Tue Feb 4 18:05:44 1992 Per Bothner (bothner at cygnus.com) * mipsread.c: Use (FP0_REGNUM-32) instead of magic number 6. (This is just for clarity - and one day permitting us to change FP0_REGNUM from 38 to 32, which would make more sense.) * tm-mips.h: Added STAB_REG_TO_REGNUM macro, so that register numbers in stabs-in-ecoff get handled correctly. Sat Feb 1 04:45:10 1992 Stu Grossman (grossman at cygnus.com) * xm-vax.h, xm-vaxult.h, xm-vaxbsd.h, config/mh-vaxult, config/mh-vaxbsd, configure.in: Split up config stuff for Vaxen into BSD and Ultrix. Sat Feb 1 04:39:41 1992 John Gilmore (gnu at cygnus.com) * dbxread.c (dbx_symfile_init): Call malloc, not xmalloc. Sat Feb 1 04:15:41 1992 Stu Grossman (grossman at cygnus.com) * Makefile.in: Increment version to 4.4.1. * main.c (print_gdb_version): Update copyright notice. Sat Feb 1 01:43:11 1992 Per Bothner (bothner at cygnus.com) * mipsread.c: Prepend "struct " to the names of structure types, and similarly for enums and unions. (This used to be done, but got lost in the re-write to "guess" the difference between enum/struct/union.) Also, guess that a tag is an enum if the first member has type btNil. Fri Jan 31 21:45:51 1992 Stu Grossman (grossman at cygnus.com) * xm-vax.h: #ifndef ultrix around #include of endian.h and limits.h (sigh). Fri Jan 31 00:05:01 1992 John Gilmore (gnu at cygnus.com) * Projects: Patching executables is done. * Makefile.in (VERSION): Roll to gdb-4.4. * README, WHATS.NEW: Update for gdb-4.4. * symfile.c (reread_symbols): Whenever we reread one object file's symbols, we must restart the scan, because the object_files chain has been permuted. * exec.c (exec_files_info): Split out into print_section_info. Print BFD filename of each section if it's not the default one. * core.c (core_files_info): Call print_section_info. * xm-vax.h: Include a few system header files whose definitions must precede defs.h. * language.c, language.h: Make some things const. * expression.h, main.c: const spreads like ooze. * mem-break.c (break_insn, break_insn_size): Use unsigned chars, since BREAKPOINT values can be >0x80. Thu Jan 30 17:21:14 1992 Stu Grossman (grossman at cygnus.com) * infrun.c, xm-i386sco.h: SCO needs to use setpgid(). Thu Jan 30 01:04:23 1992 John Gilmore (gnu at cygnus.com) * sparc-pinsn.c: Remove kludge for preferring architectures. Remove #ifdef's for SORT_NEEDED. We need to sort the table, now and forever. Add `add' instruction to the set that get checked for a preceding `sethi' in order to print an absolute address. Corresponding changes in ../include/opcode/sparc.h needed to eliminate garbage instructions. Wed Jan 29 19:24:34 1992 Per Bothner (bothner at cygnus.com) * mipsread.c (parse_partial_symbols): Make sure partial symbols are created for external symbols (as used to be the case). This is a bit of a pain with the mips-coff. It uses a table which points to all of the external symbols belonging to a particular FDR or psymtab. Once we've generated this table, we might as well save it, and then use it in psymtab_to_symtab_1 to find the symbols to pass to parse_external(). * symfile.c, symfile.c: New function start_psymtab_common to share the common parts of allocating a new psymtab for dbxread, mipsread (and later dwarfread). Its code was pulled out from start_psymtab in dbxread.c. * dbxread.c (start_psymtab): Use start_psymtab_common(). * valprint.c (val_print): If there is an error when trying to print a string, check to see if there really is a problem by reading just one character. If that works, assume things are ok. Wed Jan 29 18:58:43 1992 Stu Grossman (grossman at cygnus.com) * sparc-pinsn.c (compare_opcodes): Make it prefer v6, v7, cypress, v8 mnemonics in that order. Tue Jan 28 17:32:13 1992 Per Bothner (bothner at cygnus.com) * sparc-pinsn.c: Put the qsort() back in. Mon Jan 27 18:51:03 1992 John Gilmore (gnu at cygnus.com) * findvar.c (read_register, write_register): Handle machines where REGISTER_TYPE is not the same size as "int". Handle debug symbols in dynamically loaded (relocated) code: * dbxread.c (read_ofile_symtab): Fix up N_CATCH better. Pass offset to process_one_symbol. (process_one_symbol): Take new offset parameter. Add it into appropriate symbol types to relocate symbols to loaded addresses. Handle all possible symbol types, and complain() about types that we don't expect to see. * mipsread.c (psymtab_to_symtab_1): Pass offset of zero to process_one_symbol (FIXME, should pass real offset). Misc bugfixes: * breakpoint.c (resolve_sal_pc): Split out code to resolve a sal's PC value. (set_breakpoint, break_command_1, until_break_command, catch_command_1, breakpoint_re_set_one): Use it. * symtab.h (resolve_sal_pc): Declare. * infcmd.c (jump_command): Use resolve_sal_pc. * source.c (list_command): Shorten "FILE, line N" to "FILE:N". * putenv.c (putenv): Avoid unportably casting pointers to unsigneds. * c-exp.y (yylex): `this' and `template' are only tokens in C++. * xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, xm-np1.h, xm-pn.h, xm-pyr.h, xm-rtbsd.h, xm-symmetry.h, xm-umax.h: Remove MISSING_VPRINTF declaration, and superfluous "kgdb" defines. Mon Jan 27 15:46:21 1992 Stu Grossman (grossman at cygnus.com) * dbxread.c (process_one_symbol): Make a first cut at handling symbol tables generated by Sun's acc. (#ifdef'd out, FIXME.) * symtab.c (find_pc_line): Fix stepping into and out of #included files. Mon Jan 27 13:00:55 1992 Stu Grossman (grossman at cygnus.com) * Makefile.in (OPCODES): Remove OPCODES defs and refs. There is no longer any need to copy ../include/opcode/* into gdb. Mon Jan 27 12:30:38 1992 John Gilmore (gnu at cygnus.com) * ChangeLog, ChangeLog-9091: Split ChangeLog at 1992. Sun Jan 26 19:05:40 1992 Per Bothner (bothner at cygnus.com) * valprint.c (type_print_base, type_print_method_args): Print C++ constructor methods without bogus "return type." Sat Jan 25 15:57:59 1992 Fred Fish (fnf at cygnus.com) * infptrace.c (child_xfer_memory): Parameter "target" should be a pointer to a structure, not the entire structure. Fri Jan 24 01:30:27 1992 Fred Fish (fnf at cygnus.com) * depend: Convert the couple of references to ansidecl.h that used the local gdb version to use the ../include version. Thu Jan 23 22:24:43 1992 Fred Fish (fnf at cygnus.com) * procfs.c (child_xfer_memory): Takes pointer to a struct, not entire struct. (inferior_proc_init): Fix non-ANSI version of args. (attach): Call print_sys_errmsg with correct number of args. (mappingflags): Make static, does not need to be global. * i386-tdep.c (i386_frame_num_args): Takes a pointer to a struct not the entire struct itself. * valops.c (value_assign): Cast some args to modify_field() and {read,write}_register_bytes() correctly. * ansidecl.h: Removed, is duplicate of ../include/ansidecl.h * Makefile.in (MALLOCSRC): Removed reference to removed local copy of ansidecl.h. * dwarfread.c (list_in_scope): Needs an initial value, use file scope. Mon Jan 20 19:06:28 1992 Stu Grossman (grossman at cygnus.com) * main.c (main): Make option_index local to keep new getopt happy. main.c, solib.c, Makefile.in: Update copyright notices. Mon Jan 20 08:54:00 1992 Michael Tiemann (tiemann at cygnus.com) * cplus-dem.c (cplus_demangle): Correctly demangle destructors. Sat Jan 18 17:17:45 1992 Stu Grossman (grossman at cygnus.com) * Makefile.in (HFILES): Add partial-stab.h. Sat Jan 18 16:45:01 1992 Fred Fish (fnf at cygnus.com) * config/mh-stratus, config/mt-stratus, tm-stratus.h, xm-stratus.h: New files for stratus. Not complete enough to actually build on the Stratus machine; that awaits copyright assignment for i860 changes. * Makefile.in (USER_CFLAGS): Add macro specifically reserved for getting custom flags into CFLAGS when doing makes. * configure.in: Add config information for stratus. Thu Jan 16 00:51:46 1992 Fred Fish (fnf at cygnus.com) * dbxread.c (process_one_symbol): Pass address of structure to complain(), rather than the whole structure. Wed Jan 15 09:56:16 1992 Fred Fish (fnf at cygnus.com) * solib.c (solib_add_common_symbols): Only compile in when not using SVR4 style shared libraries. Tue Jan 14 22:34:00 1992 Fred Fish (fnf at cygnus.com) * dwarfread.c (locval): Add offreg flag to indicate location values that are computed off a base register. * dwarfread.c (new_symbol): Rework TAG_global_variable and TAG_local_variable cases to account for static variables within function scopes. Tue Jan 14 12:28:52 1992 Stu Grossman (grossman at cygnus.com) * inflow.c: remove #include . Not necessary, and doesn't exist on some systems. * infrun.c (wait_for_inferior!!!!): Prevent gdb from hanging when nexting over recursive function calls. * target.c (target_read_string): Create this routine to read null terminated strings from the target. It deals with running off the end of memory elegantly as well. solib.c (find_solib): Use target_read_string() to avoid problems with running off the end of memory. * inflow.c (child_terminal_info): #ifdef TIOCPGRP around lines that reference pgrp_inferior. Mon Jan 13 14:57:11 1992 Per Bothner (bothner at cygnus.com) * tm-mips.h: Removed BLOCK_ADDRESS_ABSOLUTE, now that mips-tfile has been hacked to act more "traditionally." * dbxread.c: Fixed typo in comment. Sun Jan 12 13:08:36 1992 Per Bothner (bothner at cygnus.com) * mips-tdep.c (mips_skip_prologue): Add some number of 'sw' instructions before 'addiu' adjusts the stack. Fri Jan 10 13:47:06 1992 Fred Fish (fnf at cygnus.com) * dwarfread.c (start_symtab, end_symtab, scopecount, openscope, freescope, buildblock closescope, record_line, add_symbol_to_list, gatherblocks, make_blockvector): Extensive changes to switch to generic symbol table building code in buildsym.c. Remove scope tree structures and functions, symbol table building functions, and lots of other small changes. * dwarfread.c: Add new macros GCC_PRODUCER and STREQN. Remove GCC_COMPILED_FLAG_SYMBOL and GCC2_COMPILED_FLAG_SYMBOL. Tue Jan 7 13:09:57 1992 Stu Grossman (grossman at cygnus.com) * buildsym.c (cleanup_undefined_types): Add support for enums. This fixes the 'GDB internal error. cleanup_undefined_types with bad type' problem. Sun Jan 5 09:47:50 1992 Stu Grossman (grossman at cygnus.com) * dbxread.c: detect gcc2 compilations. Thu Jan 2 15:07:41 1992 John Gilmore (gnu at cygnus.com) * sparc-pinsn.c: Rename bitfields that overlap with macro names in ../include/opcode/sparc.h. Wed Jan 1 04:29:00 1992 Fred Fish (fnf at cygnus.com) * Makefile.in: Change tm-svr4.h to tm-sysv4.h. Change xm-svr4.h to xm-sysv4.h. Split OPCODE_DIR into OPCODE_DIR1 and OPCODE_DIR2 to reflect actual locations of opcode files, so TAGS target will be buildable. * i386-tdep.c: Change an erroneous 'm68k' reference to 'i386'. * i386-tdep.c (supply_fpregset, fill_fpregset): Remove m68k code. * m68k-tdep.c (supply_fpregset, fill_fpregset): Fix array dereferencing to access the correct elements. * valops.c (value_addr): Declare return type of external func value_copy(). * xcoffread.c: Undefine next_symbol_text before redefining it. For older changes see ChangeLog-9091 Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: