# Mappings from configurations to GDB target definitions. This is # invoked from the autoconf generated configure script. # This file sets the following shell variables: # gdb_target_cpu generic name of CPU # gdb_target name of GDB target definition to use # This file may also modify configdirs. # Map target cpu into the config cpu subdirectory name. # The default is $target_cpu. case "${target_cpu}" in alpha*) gdb_target_cpu=alpha ;; arm*) gdb_target_cpu=arm ;; avr*) gdb_target_cpu=avr ;; hppa*) gdb_target_cpu=pa ;; i[34567]86*) gdb_target_cpu=i386 ;; m68hc11*|m6811*) gdb_target_cpu=m68hc11 ;; m68*) gdb_target_cpu=m68k ;; mips*) gdb_target_cpu=mips ;; powerpc*) gdb_target_cpu=powerpc ;; sparc*) gdb_target_cpu=sparc ;; thumb*) gdb_target_cpu=arm ;; s390*) gdb_target_cpu=s390 ;; sh*) gdb_target_cpu=sh ;; strongarm*) gdb_target_cpu=arm ;; xscale*) gdb_target_cpu=arm ;; v850*) gdb_target_cpu=v850 ;; x86_64*) gdb_target_cpu=i386 ;; *) gdb_target_cpu=$target_cpu ;; esac # map target info into gdb names. case "${target}" in x86_64-*-freebsd*) gdb_target=fbsd64 ;; *-*-freebsd*) gdb_target=fbsd ;; alpha*-*-osf*) gdb_target=alpha-osf1 ;; alpha*-*-linux*) gdb_target=alpha-linux ;; alpha*-*-netbsd*) gdb_target=nbsd ;; alpha*-*-*) gdb_target=alpha ;; arm*-wince-pe) gdb_target=wince ;; arm*-*-linux*) gdb_target=linux build_gdbserver=yes ;; arm*-*-netbsd*) gdb_target=nbsd ;; arm-*-nto*) gdb_target=nto ;; arm*-*-* | thumb*-*-* | strongarm*-*-*) gdb_target=embed configdirs="$configdirs rdi-share" ;; xscale-*-*) gdb_target=embed configdirs="$configdirs rdi-share" ;; avr-*-*) gdb_target=avr ;; cris*) gdb_target=cris ;; d10v-*-*) gdb_target=d10v ;; h8300-*-*) gdb_target=h8300 ;; frv-*-*) gdb_target=frv ;; hppa*64*-*-hpux11*) gdb_target=hppa64 ;; hppa*-*-hpux*) gdb_target=hppahpux ;; hppa*-*-hiux*) gdb_target=hppahpux ;; hppa*-*-*) gdb_target=hppa ;; i[34567]86-ncr-*) gdb_target=ncr3000 ;; i[34567]86-*-bsd*) gdb_target=i386bsd ;; i[34567]86-*-netbsd*) gdb_target=nbsd ;; i[34567]86-*-openbsd*) gdb_target=obsd ;; i[34567]86-*-go32*) gdb_target=i386aout ;; i[34567]86-*-msdosdjgpp*) gdb_target=go32 ;; i[34567]86-*-nto*) gdb_target=nto ;; i[34567]86-*-lynxos*) gdb_target=i386lynx ;; i[34567]86-*-solaris*) gdb_target=i386sol2 ;; i[34567]86-*-sco*) gdb_target=i386v ;; i[34567]86-*-sysv*) gdb_target=i386v ;; i[34567]86-*-linux*) gdb_target=linux build_gdbserver=yes ;; i[34567]86-*-isc*) gdb_target=i386v ;; i[34567]86-*-gnu*) gdb_target=i386gnu ;; i[34567]86-*-netware*) gdb_target=i386nw configdirs="${configdirs} nlm" ;; i[34567]86-*-cygwin*) gdb_target=cygwin ;; i[34567]86-*-vxworks*) gdb_target=vxworks ;; i[34567]86-*-*) gdb_target=embed ;; ia64-*-aix*) gdb_target=aix ;; ia64-*-linux*) gdb_target=linux build_gdbserver=yes ;; ia64*-*-*) gdb_target=ia64 ;; m32r-*-*) gdb_target=m32r ;; m68hc11*-*-*|m6811*-*-*) gdb_target=m68hc11 ;; # OBSOLETE m68000-*-sunos3*) gdb_target=sun2os3 ;; # OBSOLETE m68000-*-sunos4*) gdb_target=sun2os4 ;; # OBSOLETE m68*-bull-sysv*) gdb_target=dpx2 ;; # OBSOLETE m68*-att-*) gdb_target=3b1 ;; m68*-cisco*-*) gdb_target=cisco ;; # OBSOLETE m68*-motorola-*) gdb_target=delta68 ;; m68*-netx-*) gdb_target=vxworks68 ;; m68*-tandem-*) gdb_target=st2000 ;; m68*-*-aout*) gdb_target=monitor ;; m68*-*-coff*) gdb_target=monitor ;; m68*-*-elf*) gdb_target=monitor ;; m68*-*-linux*) gdb_target=linux build_gdbserver=yes ;; # OBSOLETE m68*-*-lynxos*) gdb_target=m68klynx ;; m68*-*-netbsd*) gdb_target=nbsdaout ;; m68*-*-os68k*) gdb_target=os68k ;; # OBSOLETE m68*-*-sunos3*) gdb_target=sun3os3 ;; # OBSOLETE m68*-*-sunos4*) gdb_target=sun3os4 ;; # OBSOLETE m68*-*-sysv4*) gdb_target=m68kv4 ;; m68*-*-vxworks*) gdb_target=vxworks68 ;; mcore*-*-*) gdb_target=mcore ;; mips*-*-pe) gdb_target=wince ;; mips*-sgi-irix5*) gdb_target=irix5 ;; mips*-sgi-irix6*) gdb_target=irix6 ;; mips*-*-linux*) gdb_target=linux build_gdbserver=yes ;; mips*-*-netbsd*) gdb_target=nbsd ;; mips*-*-sysv4*) gdb_target=mipsv4 ;; mips*-*-vxworks*) gdb_target=vxmips ;; mips*-*-*) gdb_target=embed ;; mn10300-*-*) gdb_target=mn10300 ;; none-*-*) gdb_target=none ;; ns32k-*-netbsd*) gdb_target=nbsdaout ;; powerpc-*-netbsd*) gdb_target=nbsd ;; powerpc-*-aix*) gdb_target=aix ;; powerpc-*-linux*) gdb_target=linux build_gdbserver=yes ;; powerpc64-*-linux*) gdb_target=linux ;; powerpc-*-vxworks*) gdb_target=vxworks ;; powerpc*-*-*) if test -f ../sim/ppc/Makefile; then gdb_target=ppc-sim else gdb_target=ppc-eabi fi ;; rs6000-*-lynxos*) gdb_target=rs6000lynx ;; rs6000-*-aix4*) gdb_target=aix4 ;; rs6000-*-*) gdb_target=rs6000 ;; s390-*-*) gdb_target=s390 build_gdbserver=yes ;; s390x-*-*) gdb_target=s390x build_gdbserver=yes ;; sh*-*-pe) gdb_target=wince ;; sh-*-coff*) gdb_target=embed ;; sh-*-elf*) gdb_target=embed ;; # FIXME should that be sh*-*-linux*, perhaps? sh-*-linux*) gdb_target=linux build_gdbserver=yes ;; sh*-*-netbsdelf*) gdb_target=nbsd ;; sh-*-nto*) gdb_target=nto ;; sh*) gdb_target=embed ;; sparc-*-aout*) gdb_target=sparc-em ;; sparc-*-coff*) gdb_target=sparc-em ;; sparc-*-elf*) gdb_target=sparc-em ;; sparc-*-linux*) gdb_target=linux ;; sparc-*-lynxos*) gdb_target=sparclynx ;; sparc-*-netbsd*) gdb_target=nbsd ;; sparc-*-solaris2*) gdb_target=sun4sol2 ;; sparc-*-sunos4*) gdb_target=sun4os4 ;; sparc-*-sunos5*) gdb_target=sun4sol2 ;; sparc-*-vxworks*) gdb_target=vxsparc ;; sparc-*-*) gdb_target=sun4os4 ;; # It's not clear what the right solution for "v8plus" systems is yet. # For now, stick with sparc-sun-solaris2 since that's what config.guess # should return. Work is still needed to get gdb to print the 64 bit # regs (some of which are usable in v8plus) so sp64sol.mt hasn't been # deleted though presumably it should be eventually. #sparc64-*-solaris2*) gdb_target=sp64sol2 ;; sparc64-*-linux*) gdb_target=sp64linux ;; sparc64-*-netbsd*) gdb_target=nbsd64 ;; sparcv9-*-* | sparc64-*-*) gdb_target=sp64 ;; xstormy16-*-*) gdb_target=xstormy16 ;; vax-*-*) gdb_target=vax ;; v850*-*-*) gdb_target=v850 case ${gdb_host} in cygwin*) CONFIG_OBS="${CONFIG_OBS} v850ice.o" ;; * ) ;; esac ;; x86_64-*-linux*) gdb_target=x86-64linux build_gdbserver=yes ;; x86_64-*-netbsd*) gdb_target=nbsd64 ;; esac # map target onto default OS ABI case "${target}" in *-*-linux*) gdb_osabi=GDB_OSABI_LINUX ;; *-*-gnu*) gdb_osabi=GDB_OSABI_HURD ;; *-*-nto*) gdb_osabi=GDB_OSABI_QNXNTO ;; *-*-solaris*) gdb_osabi=GDB_OSABI_SOLARIS ;; esac