In commit b86d3af60f and 0ab0435fe6 I fixed SIGBUS errors found by
oss-fuzz now that --with-mmap defaults to enabled. It turns out there
are further problems with the aout mmap code: aout_read_minisymbols
returns the external symbol array, which is later freed by nm.c. If
the array is mmaped you can't free it. Now this could be fixed by
making aout minisymbols an array of pointers, but I figure there's not
much point in expending effort on that. So delete the aout mmap
support along with bfdwin.c and get_section_contents_in_window.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
The new Synopsys's ARCv3 ISA is capable to run either 64-bit or
32-bit ISA. The new 32-bit ISA is not compatible with the old
Synopsys ARCv1/ARCv2 ISA, however, it retains a lot of common
concepts. Thus, this patch is reusing the old ARC BFD backend and
adds the necessary bits for the new architecture in a similar way as
it is done for RISCV backend.
bfd/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
Cupertino Miranda <cupertinomiranda@gmail.com>
* bfd/Makefile.am: Add ARC64 files.
* bfd/Makefile.in: Regerate.
* bfd/arc-got.h (TCB_SIZE): Depends on the target architecture.
(GOT_ENTRY_SIZE): New define.
(write_in_got): Likewise.
(read_from_got): Likewise.
(align_power): Likewise.
(arc_got_entry_type_for_reloc): Use RELA_SIZE and GOT_ENTRY_SIZE.
(arc_fill_got_info_for_reloc): Update formating.
(relocate_fix_got_relocs_for_got_info): Likewise.
(arc_static_sym_data): Deleted structure.
(get_static_sym_data): Deleted function.
(relocate_fix_got_relocs_for_got_info): Use symbol static data.
(create_got_dynrelocs_for_single_entry): Update formating.
(create_got_dynrelocs_for_got_info): Likewise.
* bfd/arc-plt.c: New file.
* bfd/arc-plt.def: Add ARC64 PLT entry.
* bfd/arc-plt.h: Clean it up, move functionality to arc-plt.c file.
* bfd/archures.c: Add ARC64 target.
* bfd/config.bfd: Likewise.
* bfd/configure.ac: Likewise.
* bfd/bfd-in2.h: Regenerate.
* bfd/configure: Likewise.
* bfd/libbfd.h: Likewise.
* bfd/cpu-arc.c: Clean it up.
* bfd/cpu-arc64.c: New file.
* bfd/elf32-arc.c: Renamed to elfnn-arc.c.
* bfd/elfnn-arc.c: New file.
* bfd/reloc.c: Add new ARC64 relocs.
* bfd/targets.c: Add ARC64 target.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
Pattern rules in doc/local.mk exist that specify how to make
libbfd.texi from libfd.h or libbfd.c. Since both files exist and the
libbfd.h rule is first, libbfd.h is used. libbfd.h doesn't contain
the documentation..
* doc/local.mk (doc/%stamp): Put rule making this from %.c
before %.h rule.
* Makefile.in: Regenerate.
* libbfd.c (Byte swapping routines): Don't omit description.
bfd/
* Makefile.am: Move elf32-kvx.lo from BFD32_BACKENDS to
BFD64_BACKENDS. Remove elfxx-kvx.lo from BFD32_BACKENDS.
Remove elfxx-kvx.c from BFD32_BACKENDS_CFILES.
* Makefile.in: Regenerate.
* config.bfd: Adjust targ_defvec and targ_selvecs and gate them
behind BFD64.
* configure.ac: Add target_size=64 to kvx_elf64_*vec.
* configure: Regenerate.
* elfnn-kvx.c (elfNN_kvx_stub_name): Cast rel->r_addend to
uint64_t to match format string.
(elfNN_kvx_relocate_section): Similarly for r_offset, and
use PRIx64 in format string.
* targets.c (_bfd_target_vector <kvx_elf32_vec>): Move inside
#ifdef BFD64.
ld/
* Makefile.am: Move eelf32kvx.c from ALL_EMULATION_SOURCES to
ALL_64_EMULATION_SOURCES.
* Makefile.in: Regenerate.
The elf32-kvx.c and elf64-kvx.c rules in the bfd makefile are
different to the other similar generated files, and that reminded me
that we need to have $srcdir in the generated #line reference back to
the source for debugging, but don't want it for comments in bfd.pot
(because then bfd.pot will likely reference Nick's source tree).
This patch fixes that by making all the #line use $srcdir by virtue of
using $<, and edits bfd.pot.
I also uniq list of files to remove duplicated elfxx-x86.c, sort lists
of files and regen with our standard automake/autoconf.
* configure: Regenerate.
bfd/
* Makefile.am: Sort various lists of files. Use $< in #line
directive of generated C files.
(po/SRC-POTFILES.in): uniq SRC_POTFILES.
(po/BLD-POTFILES.in): uniq BFD_POTFILES.
* Makefile.in: Regenerate.
* po/Make-in (bfd.pot): Edit out source dir from comments.
* po/SRC-POTFILES.in: Regenerate.
gas/
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Sort.
* Makefile.in: Regenerate.
bfd/doc/chew.c extracts documentation from source code comments
annotated with keywords, and generates much of bfd.h and libbfd.h from
those same comments. The docs have suffered from people (me too)
adding things like CODE_FRAGMENT to the source to put code into bfd.h
without realising that CODE_FRAGMENT also puts @example around said
code into the docs. So we have random senseless things in the docs.
This patch fixes that problem (well, the senseless things from
CODE_FRAGMENT), moves most of the code out of bfd-in.h, and improves a
few chew.c features. libbfd.h now automatically gets ATTRIBUTE_HIDDEN
prototypes, and indentation in bfd.h and libbfd.h is better.
Having been irritated by seeing bfd/elf{32,64}-aarch64.c to be re-
generated in x86-only builds, I came across 769a27ade5 ("Re: bfd
BLD-POTFILES.in dependencies"). I think this went slightly too far, as
outside of maintainer mode dependencies will cause the subset of files
to be (re-)generated which are actually needed for the build.
Generating them all is only needed when wanting to update certain files
under bfd/po/, i.e. in maintainer mode.
In the course of looking around in an attempt to try to understand how
things are meant to work, I further noticed that ld has got things
slightly wrong too: BLD-POTFILES.in depending on $(BLD_POTFILES) isn't
quite right (the output doesn't change when any of the enumerated files
changes; it's the mere presence which matters); like in bfd it looks
like we would better extend BUILT_SOURCES accordingly.
Furthermore it became apparent that ld fails to enumerate the .c files
generated from the .l and .y ones. While in their absence it was benign
whether translatable strings in the source files were actually marked as
such, this now becomes relevant. Mark respective strings at the same
time, but skipping ones which look to be of interest for debugging
purposes only (e.g. such used by printf() enclosed in #ifdef TRACE).
I couldn't see that H_CFLAGS is defined anywhere, so remove it.
2023-02-07 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* doc/local.mk (%D%/chew.stamp): Don't use H_CFLAGS.
So let's not copy .libs/libbfd.a to libbfd.a now that nothing in the
binutils-gdb source tries to link against it.
PR 30022
* Makefile.am (noinst_LIBRARIES, libbfd_a_SOURCES, stamp-lib),
(libbfd.a): Delete rules.
(CLEANFILES): Adjust to suit.
init.c contains just one function that doesn't do much. Move it to
bfd.c and give it something to do, initialising static state. So far
the only initialisation is for bfd.c static variables.
The idea behind reinitialising state is to see whether some set of
flaky oss-fuzz crashes go away. oss-fuzz stresses binutils in ways
that can't occur in reality, feeding multiple testcases into the
internals of binutils. So one testcase may affect the result of the
next testcase.
* init.c: Delete file. Move bfd_init to..
* bfd.c (bfd_init): ..here. Init static variables.
* Makefile.am (BFD32_LIBS): Remove init.lo.
(BFD32_LIBS_CFILES, BFD_H_FILES): Remove init.c.
* doc/local.mk: Remove mention of init.texi and init.c.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
Delete a few files only used for obsolete targets, and tidy config,
xfails and other pieces of support specific to those targets. And
since I was editing target triplets in test files, fix the nm
alpha-linuxecoff fails.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
Commit 5aa0f10c42 added a per_xvec_warn array to provide support for
warnings from elf_object_p (and a later patch for warnings from
pe_bfd_object_p) to be cached and then only printed if the target
matches. It was quite limited in the style of message supported, only
one message could be printed, and didn't really meet the stated aim of
only warning when a target matches: There are many other errors and
warnings that can be emitted by functions called from elf_object_p.
So this patch extends the error handler functions to support printing
to a string buffer, extends per_xvec_warn to support multiple errors/
warnings, and hooks this all into bfd_check_format_matches. If
bfd_check_format_matches succeeds then any errors/warnings are printed
for the matching target. If bfd_check_format_matches fails either due
to no match or to multiple matches and only one target vector produced
errors, then those errors are printed.
* bfd.c (MAX_ARGS): Define, use throughout.
(print_func): New typedef.
(_bfd_doprnt): Add new print param. Replace calls to fprintf
with print.
(PRINT_TYPE): Similarly.
(error_handler_fprintf): Renamed from error_handler_internal.
Use _bfd_get_error_program_name. Add fprintf arg. Move code
setting up args..
(_bfd_doprnt_scan): ..to here. Add ap param.
(struct buf_stream): New.
(err_sprintf): New function.
(error_handler_bfd): New static variable.
(error_handler_sprintf): New function.
(_bfd_set_error_handler_caching): New function.
(_bfd_get_error_program_name): New function.
* elfcode.h (elf_swap_shdr_in): Use _bfd_error_handler in
warning messages.
(elf_object_p): Likewise.
* format.c (print_warnmsg): New function.
(clear_warnmsg): Rewrite.
(null_error_handler): New function.
(bfd_check_format_matches): Ignore warnings from recursive calls
checking first element of an archive. Use caching error handler
otherwise. Print warnings on successful match, or when only one
target has emitted warnings/errors.
* peicode.h (pe_bfd_object_p): Use _bfd_error_handler in
warning messages.
* targets.c (per_xvec_warn): Change type of array elements.
(struct per_xvec_message): New.
(_bfd_per_xvec_warn): Rewrite.
* Makefile.am (LIBBFD_H_FILES): Add bfd.c.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
Import include/xtensa-dynconfig.h that defines XCHAL_* macros as fields
of a structure returned from the xtensa_get_config_v<x> function call.
Define that structure and fill it with default parameter values
specified in the include/xtensa-config.h.
Define reusable function xtensa_load_config that tries to load
configuration and return an address of an exported object from it.
Define functions xtensa_get_config_v{1,2} that use xtensa_load_config
to get structures xtensa_config_v{1,2}, either dynamically configured
or the default.
bfd/
* Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Append
xtensa-dynconfig.c.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac (xtensa_elf32_be_vec, xtensa_elf32_le_vec): Add
xtensa-dynconfig.lo to the tb.
* elf32-xtensa.c (xtensa-config.h): Replace #include with
xtensa-dynconfig.h.
(XSHAL_ABI, XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): Remove
definitions.
* xtensa-dynconfig.c: New file.
* xtensa-isa.c (xtensa-dynconfig.h): New #include.
(xtensa_get_modules): New function.
(xtensa_isa_init): Call xtensa_get_modules instead of taking
address of global xtensa_modules.
gas/
* config/tc-xtensa.c (xtensa-config.h): Replace #include with
xtensa-dynconfig.h.
(XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0, XTENSA_MARCH_EARLIEST):
Remove definitions.
* config/tc-xtensa.h (xtensa-config.h): Replace #include with
xtensa-dynconfig.h.
* config/xtensa-relax.c (xtensa-config.h): Replace #include with
xtensa-dynconfig.h.
(XCHAL_HAVE_WIDE_BRANCHES): Remove definition.
include/
* xtensa-dynconfig.h: New file.
ld/
* emultempl/xtensaelf.em (xtensa-config.h): Replace #include
with xtensa-dynconfig.h.
(XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): Remove definitions.
The linker merges all the input .sframe sections. When merging, the
linker verifies that all the input .sframe sections have the same
abi/arch.
The linker uses libsframe library to perform key actions on the
.sframe sections - decode, read, and create output data. This
implies buildsystem changes to make and install libsframe before
libbfd.
The linker places the output .sframe section in a new segment of its
own: PT_GNU_SFRAME. A new segment is not added, however, if the
generated .sframe section is empty.
When a section is discarded from the final link, the corresponding
entries in the .sframe section for those functions are also deleted.
The linker sorts the SFrame FDEs on start address by default and sets
the SFRAME_F_FDE_SORTED flag in the .sframe section.
This patch also adds support for generation of SFrame unwind
information for the .plt* sections on x86_64. SFrame unwind info is
generated for IBT enabled PLT, lazy/non-lazy PLT.
The existing linker option --no-ld-generated-unwind-info has been
adapted to include the control of whether .sframe unwind information
will be generated for the linker generated sections like PLT.
Changes to the linker script have been made as necessary.
ChangeLog:
* Makefile.def: Add install dependency on libsframe for libbfd.
* Makefile.in: Regenerated.
* bfd/Makefile.am: Add elf-sframe.c
* bfd/Makefile.in: Regenerated.
* bfd/bfd-in2.h (SEC_INFO_TYPE_SFRAME): Regenerated.
* bfd/configure: Regenerate.
* bfd/configure.ac: Add elf-sframe.lo.
* bfd/elf-bfd.h (struct sframe_func_bfdinfo): New struct.
(struct sframe_dec_info): Likewise.
(struct sframe_enc_info): Likewise.
(struct elf_link_hash_table): New member for encoded .sframe
object.
(struct output_elf_obj_tdata): New member.
(elf_sframe): New access macro.
(_bfd_elf_set_section_sframe): New declaration.
* bfd/elf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
(bfd_section_from_phdr): Likewise.
(get_program_header_size): Likewise.
(_bfd_elf_map_sections_to_segments): Likewise.
* bfd/elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Add
contents to the .sframe sections or .plt* entries.
* bfd/elflink.c (elf_section_ignore_discarded_relocs): Handle
SEC_INFO_TYPE_SFRAME.
(_bfd_elf_default_action_discarded): Handle .sframe section.
(elf_link_input_bfd): Merge .sframe section.
(bfd_elf_final_link): Write the output .sframe section.
(bfd_elf_discard_info): Handle discarding .sframe section.
* bfd/elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Create
.sframe section for .plt and .plt.sec.
(_bfd_x86_elf_finish_dynamic_sections): Handle .sframe from
.plt* sections.
* bfd/elfxx-x86.h (PLT_SFRAME_FDE_START_OFFSET): New
definition.
(SFRAME_PLT0_MAX_NUM_FRES): Likewise.
(SFRAME_PLTN_MAX_NUM_FRES): Likewise.
(struct elf_x86_sframe_plt): New structure.
(struct elf_x86_link_hash_table): New member.
(struct elf_x86_init_table): New members for .sframe
creation.
* bfd/section.c: Add new definition SEC_INFO_TYPE_SFRAME.
* binutils/readelf.c (get_segment_type): Handle new segment
PT_GNU_SFRAME.
* ld/ld.texi: Update documentation for
--no-ld-generated-unwind-info.
* ld/scripttempl/elf.sc: Support .sframe sections.
* ld/Makefile.am (TESTSFRAMELIB): Use it.
(check-DEJAGNU): Likewise.
* ld/Makefile.in: Regenerated.
* ld/configure.ac (TESTSFRAMELIB): Set to the .so or .a like TESTBFDLIB.
* ld/configure: Regenerated.
* bfd/elf-sframe.c: New file.
include/ChangeLog:
* elf/common.h (PT_GNU_SFRAME): New definition.
* elf/internal.h (struct elf_segment_map): Handle new segment
type PT_GNU_SFRAME.
ld/testsuite/ChangeLog:
* ld/testsuite/ld-bootstrap/bootstrap.exp: Add SFRAMELIB.
* ld/testsuite/ld-aarch64/aarch64-elf.exp: Add new test
sframe-simple-1.
* ld/testsuite/ld-aarch64/sframe-bar.s: New file.
* ld/testsuite/ld-aarch64/sframe-foo.s: Likewise.
* ld/testsuite/ld-aarch64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-sframe/sframe-empty.d: New test.
* ld/testsuite/ld-sframe/sframe-empty.s: New file.
* ld/testsuite/ld-sframe/sframe.exp: New testsuite.
* ld/testsuite/ld-x86-64/sframe-bar.s: New file.
* ld/testsuite/ld-x86-64/sframe-foo.s: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-plt-1.d: Likewise.
* ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
* ld/testsuite/ld-x86-64/x86-64.exp: Add new tests -
sframe-simple-1, sframe-plt-1.
* ld/testsuite/lib/ld-lib.exp: Add new proc to check if
assembler supports SFrame section.
* ld/testsuite/ld-sframe/discard.d: New file.
* ld/testsuite/ld-sframe/discard.ld: Likewise.
* ld/testsuite/ld-sframe/discard.s: Likewise.
This patch provides a new function to sanity check section sizes.
It's mostly extracted from what we had in bfd_get_full_section_contents
but also handles compressed debug sections.
Improvements are:
- section file offset is taken into account,
- added checks that a compressed section can be read from file.
The function is then used when handling multiple .debug_* sections
that need to be read into a single buffer, to sanity check sizes
before allocating the buffer.
PR 26946, PR 28834
* Makefile.am (LIBBFD_H_FILES): Add section.c.
* compress.c (bfd_get_full_section_contents): Move section size
sanity checks..
* section.c (_bfd_section_size_insane): ..to here. New function.
* dwarf2.c (read_section): Use _bfd_section_size_insane.
(_bfd_dwarf2_slurp_debug_info): Likewise.
* Makefile.in: Regenerate.
* libbfd.h: Regenerate.
After commit:
commit c60b380679
Date: Wed Oct 19 10:57:12 2022 +0200
aarch64-pe support for LD, GAS and BFD
It appears that bfd/Makefile.in and bfd/configure were not regenerated
correctly. The differences in the configure file are only whitespace,
but in Makefile.in a critical reference to pe-aarch64.lo was missing.
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE.
Based on initial work by Jedidiah Thompson
Co-authored-by: Jedidiah Thompson <wej22007@outlook.com>
Co-authored-by: Zac Walker <zac.walker@linaro.org>
Removing $BLD_POTFILES from BFD-POTFILES.in was correct, but left a
hole in dependencies.
make[4]: Entering directory '/home/alan/build/gas/all/bfd/po'
make[4]: *** No rule to make target '../elf32-aarch64.c', needed by '/home/alan/src/binutils-gdb/bfd/po/bfd.pot'. Stop.
* Makefile.am (BUILT_SOURCES): Add BUILD_CFILES.
* Makefile.in: Regenerate.
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
elfcode.h can emit three warnings in elf_object_p for various things,
"section extending past end of file", "corrupt string table index",
and "program header with invalid alignment". The problem with doing
this is that the warning can be emitted for multiple possible targets
as each one is tried. I was looking at a fuzzer testcase that had an
object file with 6144 program headers, 5316 of which had invalid
alignment. It would be bad enough to get 5316 messages all the same,
but this object was contained in an archive and resulted in 4975776
repeats.
Some trimming can be done by not warning if the bfd is already marked
read_only, as is done for the "section extending past end of file"
warning, but that still results in an unacceptable number of
warnings for object files in archives. Besides that, it is just wrong
to warn about a problem detected by a target elf_object_p other than
the one that actually matches. At some point we might have more
target specific warnings.
So what to do? One obvious solution is to remove the warnings.
Another is to poke any warning strings into the target xvec, emitting
them if that xvec is the final one chosen. This also has the benefit
of solving the archive problem. A warning when recursing into
_bfd_check_format for the first element of the archive (to find the
correct target for the archive) will still be on the xvec at the point
that target is chosen for the archive. However, target xvecs are
read-only. Thus the need for per_xvec_warn to logically extend
bfd_target with a writable field. I've made per_xvec_warn one larger
than bfd_target_vector to provide one place for user code that makes
private copies of target xvecs.
* elfcode.h (elf_swap_shdr_in, elf_object_p): Stash potential
warnings in _bfd_per_xvec_warn location.
* format.c (clear_warnmsg): New function.
(bfd_check_format_matches): Call clear_warnmsg before trying
a new xvec. Print warnings for the successful non-archive
match.
* targets.c: Include libiberty.h.
(_bfd_target_vector_entries): Use ARRAY_SIZE.
(per_xvec_warn): New.
(_bfd_per_xvec_warn): New function.
* Makefile.am (LIBBFD_H_FILES): Add targets.c.
* Makefile.in: Regenerate.
* libbfd.h: Regenerate.
A file that consists of a list of files doesn't depend on those files
being built. This patch came from trying to avoid a maintainer-mode
make -j bug, where the recipe for targmatch.h was being run twice in
parallel. Typical output shown below.
make[2]: Entering directory '/build/gas/all/bfd'
GEN bfdver.h
GEN elf32-target.h
GEN elf64-target.h
GEN targmatch.h
Making info in po
make[3]: Entering directory '/build/gas/all/bfd/po'
cd .. && make po/SRC-POTFILES.in
cd .. && make po/BLD-POTFILES.in
make[4]: Entering directory '/build/gas/all/bfd'
GEN elf32-aarch64.c
GEN elf64-aarch64.c
GEN elf32-ia64.c
GEN elf64-ia64.c
GEN elf32-loongarch.c
GEN elf64-loongarch.c
GEN elf32-riscv.c
GEN elf64-riscv.c
GEN peigen.c
GEN pepigen.c
GEN pex64igen.c
GEN pe-aarch64igen.c
GEN targmatch.h
make[4]: Entering directory '/build/gas/all/bfd'
CCLD doc/chew.stamp
mv: cannot stat 'targmatch.new': No such file or directory
make[4]: *** [Makefile:2325: targmatch.h] Error 1
* Makefile.am (po/BLD-POTFILES.in): Don't depend on $(BLD_POTFILES).
(po/SRC-POTFILES.in): Don't depend on $(SRC_POTFILES).
This adds support for efi-loongarch64 by virtue of adding a new PEI target
pei-loongarch64. This is not a full target and only exists to support EFI at
this time.
This means that this target does not support relocation processing and is mostly
a container format. This format has been added to elf based loongarch64 targets
such that efi images can be made natively on Linux.
However this target is not valid for use with gas but only with objcopy.
We should't limit addresses to 32-bits for 64-bit vma, otherwise there will be
"RVA truncated" error when using objcopy on loongarch64.
With these changes the resulting file is recognized as an efi image.
Any magic number is based on the Microsoft PE specification [1].
The test results are as follows:
$ make check-binutils RUNTESTFLAGS='loongarch64.exp'
PASS: Check if efi app format is recognized
$ objdump -h -f tmpdir/loongarch64copy.o
tmpdir/loongarch64copy.o: file format pei-loongarch64
architecture: Loongarch64, flags 0x00000132:
EXEC_P, HAS_SYMS, HAS_LOCALS, D_PAGED
start address 0x0000000000000000
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 0000003c 00000000200000b0 00000000200000b0 00000200 2**2
CONTENTS, ALLOC, LOAD, READONLY, CODE
[1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
bfd:
* .gitignore (pe-loongarch64igen.c): New.
* Makefile.am (pei-loongarch64.lo, pe-loongarch64igen.lo, pei-loongarch64.c,
pe-loongarch64igen.c): Add support.
* Makefile.in: Likewise.
* bfd.c (bfd_get_sign_extend_vma): Add pei-loongarch64.
* coff-loongarch64.c: New file.
* coffcode.h (coff_set_arch_mach_hook, coff_set_flags,
coff_write_object_contents) Add loongarch64 (loongarch64_pei_vec) support.
* config.bfd: Likewise.
* configure: Likewise.
* configure.ac: Likewise.
* libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE,
GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE,
GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT,
GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE,
GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT,
GET_PDATA_ENTRY, _bfd_peLoongArch64_bfd_copy_private_bfd_data_common,
_bfd_peLoongArch64_bfd_copy_private_section_data,
_bfd_peLoongArch64_get_symbol_info, _bfd_peLoongArch64_only_swap_filehdr_out,
_bfd_peLoongArch64_print_private_bfd_data_common,
_bfd_peLoongArch64i_final_link_postscript,
_bfd_peLoongArch64i_only_swap_filehdr_out, _bfd_peLoongArch64i_swap_aouthdr_in,
_bfd_peLoongArch64i_swap_aouthdr_out, _bfd_peLoongArch64i_swap_aux_in,
_bfd_peLoongArch64i_swap_aux_out, _bfd_peLoongArch64i_swap_lineno_in,
_bfd_peLoongArch64i_swap_lineno_out, _bfd_peLoongArch64i_swap_scnhdr_out,
_bfd_peLoongArch64i_swap_sym_in, _bfd_peLoongArch64i_swap_sym_out,
_bfd_peLoongArch64i_swap_debugdir_in, _bfd_peLoongArch64i_swap_debugdir_out,
_bfd_peLoongArch64i_write_codeview_record,
_bfd_peLoongArch64i_slurp_codeview_record,
_bfd_peLoongArch64_print_ce_compressed_pdata): New.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out,
_bfd_XXi_swap_scnhdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common,
_bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript):
Support COFF_WITH_peLoongArch64,
* pei-loongarch64.c: New file.
* peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p):
Support COFF_WITH_peLoongArch64.
(jtab): Add dummy entry that traps.
* targets.c (loongarch64_pei_vec): New.
binutils
* testsuite/binutils-all/loongarch64/loongarch64.exp: New file.
* testsuite/binutils-all/loongarch64/pei-loongarch64.d: New test.
* testsuite/binutils-all/loongarch64/pei-loongarch64.s: New test.
include
* coff/loongarch64.h: New file.
* coff/pe.h (IMAGE_FILE_MACHINE_LOONGARCH64): New.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
There is a problem with my commit 0e3c1eebb2, which replaced
bfd_uint64_t with uint64_t: Some hosts typedef int64_t to long long
even when long is the same size as long long. That confuses the code
choosing one of "l", "ll", or "I64" for BFD_VMA_FMT, and results in
warnings.
Write a direct configure test for the printf int64_t style instead.
This removes the last use of BFD_HOST_64BIT_LONG, so delete that.
Note that the changes to configure.com are pure guesswork.
PR 29348
* bfd-in.h (BFD_HOST_64BIT_LONG): Don't define.
(BFD_VMA_FMT): Define using BFD_INT64_FMT when 64-bit.
(bfd_vma, bfd_signed_vma): Move comments to 64-bit typedefs.
* configure.ac (BFD_HOST_64BIT_LONG): Delete.
(BFD_INT64_FMT): New config test.
* configure.com: Update similarly.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
Commit 04f096fb9e ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
We can't use libiberty.a in chew. libiberty is a host library, chew
a build program. Partly revert commit 7273d78f3f, instead define
local versions of the libiberty functions. ansidecl.h also isn't
needed.
* doc/chew.c: Don't include libiberty.h or ansidecl.h.
(xmalloc, xrealloc, xstrdup): New functions.
* doc/local.mk (LIBIBERTY): Don't define or use.
* Makefile.in: Regenerate.
Catch out of memory.
* doc/chew.c: Include libibery.h.
(init_string_with_size, nextword): Replace malloc with xmalloc.
(newentry, add_to_definition): Likewise.
(catchar, catbuf): Replace realloc with xrealloc.
(add_intrinsic): Replace strdup with xstrdup.
* doc/local.mk (LIBIBERTY): Define.
(chew): Link against libiberty.
* Makefile.in: Regenerate.
bfd_hostptr_t is defined as a type large enough to hold either a long
or a pointer. It mostly appears in the coff backend code in casts.
include/coff/internal.h struct internal_syment and union
internal_auxent have the only uses in data structures, where
comparison with include/coff/external.h and other code reveals that
the type only needs to be large enough for a 32-bit integer or a
pointer. That should mean replacing with uintptr_t is OK.
I hit this just now with a make -j build after touching config.bfd.
mv: cannot stat 'targmatch.new': No such file or directory
make[2]: *** [Makefile:2336: targmatch.h] Error 1
make[2]: *** Waiting for unfinished jobs....
Fix that by not removing the target of the rule, a practice that seems
likely to cause parallel running of the rule recipe. The bug goes
back to 1997, the initial c073470881 commit.
* Makefile.am (targmatch.h): rm the temp file, not targmatch.h.
* Makefile.in: Regenerate.
Add support for the AMDGCN architecture to BFD.
This is the bare minimum to get
$ ./configure --target=amdgcn-hsa-amdhsa --disable-gas
$ make all-binutils
working later in this series.
The specific AMDGCN models added here are a bit arbitrary, based on
what we intend to initially support in GDB. This list will need to be
updated in the future anyway. The complete up-to-date list of existing
AMDGPU models can be found here:
https://llvm.org/docs/AMDGPUUsage.html#processors
The ELF format for this architecture is documented here:
https://llvm.org/docs/AMDGPUUsage.html#elf-code-object
The flags for the "HSA" OS ABI are properly versioned and documented on
that page. But the NONE, PAL and MESA3D OS ABIs are not well documented
nor versioned. Taking a peek at the LLVM source code, we see that they
encode their flags the same way as HSA v3. For example, for PAL:
c8b614cd74/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp (L601)
So at least, we know that all AMDGPU objects (of which AMDGCN objects
are a subset of) at the time of writing encode the specific GPU model in
the EF_AMDGPU_MACH field of e_flags.
bfd/ChangeLog:
* Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES):
Add cpu-amdgcn.c.
(BFD64_BACKENDS): Add elf64-amdgcn.lo.
(BFD64_BACKENDS_CFILES): Add elf64-amdgcn.c.
* Makefile.in: Re-generate.
* cpu-amdgcn.c: New.
* elf64-amdgcn.c: New.
* archures.c (bfd_architecture): Add bfd_arch_amdgcn and related
mach defines.
(bfd_amdgcn_arch): New.
(bfd_archures_list): Add bfd_amdgcn_arch.
* bfd-in2.h: Re-generate.
* config.bfd: Handle amdgcn* target.
* configure.ac: Handle amdgcn_elf64_le_vec.
* configure: Re-generate.
* elf-bfd.h (elf_target_id): Add AMDGCN_ELF_DATA.
* targets.c (amdgcn_elf64_le_vec): New.
(_bfd_target_vector): Add amdgcn_elf64_le_vec.
include/ChangeLog:
* elf/amdgpu.h: New.
* elf/common.h (ELFOSABI_AMDGPU_HSA): Add.
Change-Id: I969f7b14960797e88891c308749a6e341eece5b2
Make bfd.stamp depend on source bfd.texi to avoid regenerating
doc/bfd.info for each make run.
PR binutils/28807
* Makefile.in: Regenerate.
* doc/local.mk (%D%/bfd.stamp): Depend on $(srcdir)/%D%/bfd.texi.
Rename bfdlib_LTLIBRARIES and bfdinclude_HEADERS to lib_LTLIBRARIES and
include_HEADERS to fix the missing installed library and header files in
bfd caused by
commit bd32be01c9
Author: Mike Frysinger <vapier@gentoo.org>
Date: Fri Dec 3 00:23:20 2021 -0500
bfd: merge doc subdir up a level
PR binutils/28807
* Makefile.am (bfdlib_LTLIBRARIES): Renamed to ...
(lib_LTLIBRARIES): This.
(bfdinclude_HEADERS): Renamed to ...
(include_HEADERS): This.
* Makefile.in: Regenerate.
* doc/local.mk (install): Removed.
