Commit Graph

8956 Commits

Author SHA1 Message Date
Stephane Carrez
ea3881d97c Support 68HC12 arch in Gdb 2000-11-24 21:24:04 +00:00
Stephane Carrez
5d1a66bd91 Use gdbarch_tdep for 68hc11 specific data (stack_correction global) 2000-11-24 20:59:42 +00:00
Andrew Cagney
3b851bce1d Add --enable-gdb-build-warnings=... to configure{,.in}. 2000-11-24 11:02:59 +00:00
Fernando Nasser
6442669634 Fix entry typo and missing information. 2000-11-24 00:34:43 +00:00
Peter Schauer
d57fc35284 * target.h (TARGET_SIGNAL_REALTIME_64): Added for IRIX 6.
* target.c (target_signal_from_host, do_target_signal_to_host):
	Handle TARGET_SIGNAL_REALTIME_64.
2000-11-21 10:26:07 +00:00
Kevin Buettner
a7ec76fe2f * solib.c (solib_open): Handle the case where
solib_absolute_prefix is NULL.
2000-11-21 09:23:32 +00:00
Michael Snyder
e4f7b8c818 2000-11-20 Michael Snyder <msnyder@cleaver.cygnus.com>
* solist.h: Declare new function solib_open.
        * solib.c (solib_open): New function.  Abstracts some of the
        code from solib_map_sections, for finding the binary solib file.
        (solib_map_sections): Call solib_open.
        * solib-svr4.c (enable_break): Call solib_open.
2000-11-21 01:09:54 +00:00
J.T. Conklin
22c720812e * gdbserver/low-nbsd.c (fetch_inferior_registers,
store_inferior_registers): Support older NetBSD/powerpc systems
from before fp reg support was added.  Adapt to register number
changes caused when powerpc target was multi-arched.
2000-11-21 00:25:58 +00:00
H.J. Lu
ef58a6ac64 2000-11-20 H.J. Lu <hjl@gnu.org>
* ia64-tdep.c (gdbarch_tdep): Change reference from
	ELFOSABI_MONTEREY to ELFOSABI_AIX.
2000-11-20 23:46:36 +00:00
Peter Schauer
6e77854511 * c-valprint.c (print_function_pointer_address): New function
to automatically dereference a function pointer for printing
	if necessary.
	(c_val_print):  Use print_function_pointer_address when printing
	function pointer addresses.
2000-11-20 20:33:53 +00:00
J.T. Conklin
0c9f8a6941 * gdbserver/low-nbsd.c: Fix typos. 2000-11-20 19:30:29 +00:00
Jeff Law
b57d7d21ef * pa64solib.c (add_to_solib): Pass TARGET to pa64_solib_load_symbols. 2000-11-20 17:44:07 +00:00
Andrew Cagney
81078c5d69 Add linespec maintainers. 2000-11-20 14:42:16 +00:00
Andrew Cagney
2a44e7c4e7 Devolve Solaris/x86 2000-11-20 12:45:01 +00:00
Andrew Cagney
e306c3082a * MAINTAINERS: Peter Schauer and Kevin Buettner maintain AIX. Jim
Blandy, KEvin Buettner and Peter Schauer share shared libs.
2000-11-20 12:31:43 +00:00
Andrew Cagney
c3eb0c00b3 Mark error_no_arg() as no-return. 2000-11-20 03:37:09 +00:00
Andrew Cagney
76995688e8 Replace asprintf() / vasprintf() with xasprintf() xvasprintf(). 2000-11-20 02:06:19 +00:00
Andrew Cagney
896f186799 Add ``extern'' and STREQ to cleanups. 2000-11-20 01:57:26 +00:00
Jim Blandy
e85428fca3 * symtab.c (no_symtab_msg): Remove definition.
(sources_info): Replace use of no_symtab_msg with the string
itself.
* linespec.c (no_symtab_msg): Remove declaration.
(decode_line_1): Replace uses of no_symtab_msg with the string
itself.
2000-11-19 17:27:38 +00:00
Eli Zaretskii
4a92d01105 * gdb.texinfo (Continuing and Stepping): Fixed markup and typos,
as suggested by Dmitry Sivachenko <dima@Chg.RU>.
2000-11-19 06:31:39 +00:00
Kevin Buettner
55d05f3b1d Handle optimizer code motions into the prologue. 2000-11-18 05:50:11 +00:00
Kevin Buettner
ba5f58cb2e Protoization. 2000-11-18 02:05:46 +00:00
Nicholas Duffek
9d2e1bab9d * lib/gdb.exp (gdb_test): Override timeout with board info. 2000-11-17 17:16:24 +00:00
Nicholas Duffek
1aca8eb7fa * gdb.base/display.exp: Don't kill running stub. Add "again" to
the second kill and detach messages.
2000-11-17 17:13:33 +00:00
Nicholas Duffek
930764990d * configure.in: Add AC_EXEEXT.
* configure: Regenerate.
	* Makefile.in (just-check): Export EXEEXT.
	* lib/gdb.exp ($EXEEXT): Import from environment.
	* gdb.base/maint.exp: Expect $EXEEXT in executable name.  Don't
	expect "maint dump-me" on Cygwin.
	* gdb.base/reread.exp ($binfile, $binfile1, $binfile2): Append
	$EXEEXT.
2000-11-17 16:37:48 +00:00
Nicholas Duffek
30e87cd372 * gdb.base/break.exp: Test backtrace and finish from called
function on all platforms, not just HP-UX.
2000-11-17 16:24:48 +00:00
Christopher Faylor
b90a5f516a * gdb.texinfo: Document new 'set step-mode' command. 2000-11-17 03:59:40 +00:00
Christopher Faylor
e35ce267f5 * thread.c (thread_apply_all_command): Save the command before executing it
because it may be modified.  Restore the saved command so that the same command
is executed on next thread.
(thread_apply_command): Same correction.
2000-11-17 03:49:41 +00:00
Michael Snyder
165cd47f5e 2000-11-16 Michael Snyder <msnyder@cleaver.cygnus.com>
* regcache.c (read_register_bytes): Failing to set register_valid
        is not necessarily an error, if the register is a pseudo-register.
        Some pseudo-registers are never marked as valid, so that they will
        be read anew every time.  Determining if a pseudo-register is valid
        (or should be marked invalid) may be difficult, whereas just
        recomputing it may be cheap.
2000-11-17 01:30:53 +00:00
David Taylor
0e828ed163 * tracepoint.c (trace_find_tracepoint_command): Replace call to
parse_and_eval_address with a call to parse_and_eval_long as
	we are evaluating an integer, not an address.
	* top.c (show_commands): Ditto.
2000-11-16 14:51:50 +00:00
Kevin Buettner
b095261a94 Protoization. 2000-11-15 19:58:14 +00:00
David Taylor
79496e2fad * utils.c (strlen_paddr, paddr, paddr_nz): Use TARGET_ADDR_BIT,
not TARGET_PTR_BIT, since we are dealing with addresses, not
	pointers.
2000-11-15 14:33:50 +00:00
Michael Snyder
08e706b15a 2000-11-03 Michael Snyder <msnyder@cleaver.cygnus.com>
* config/monitor.exp (gdb_target_cmd): Abstracts some of the
        code from gdb_target_monitor, so it can be used independantly
        for gdbserver.  Also comment out an unnecessary PUTS.
2000-11-14 22:19:02 +00:00
Michael Snyder
958a4e4cde 2000-11-03 Michael Snyder <msnyder@cleaver.cygnus.com>
* gdb.base/a2-run.exp: Use gdb_skip_stdio_test.
        * gdb.base/corefile.exp: Expect the message "Program is being
        debugged already" when we send the "corefile" command, since
        the preceeding gdb_load may have connected gdb to a remote target.
        * gdb.base/display.exp: Disable hardware watchpoints if new
        board info variable "no_hardware_watchpoints" is true.
        Replace single-letter commands with more readable ones.
        * gdb.base/recurse.exp (recurse_tests): Disable hardware watchpoints
        if new board info variable "no_hardware_watchpoints" is true.
        * gdb.base/restore.exp (restore_tests): Call gdb_skip_stdio_tests
        to see if stdio (printf) testing is possible.
        * gdb.base/watchpoint.exp: Disable hardware watchpoints if new
        board info variable "no_hardware_watchpoints" is true.  Use new
        proc "gdb_skip_stdio_tests" to see if printf tests are possible.
2000-11-14 22:12:26 +00:00
Daniel Berlin
770de1994e From Kenneth Block <kenneth.block@compaq.com>
* demangle.c: Use libibery list of demanglers instead of out of
date local copy.
2000-11-14 16:46:24 +00:00
Andrew Cagney
4ad5b0f716 Fix ``show remotewritesize'' was doing a set. 2000-11-14 13:45:38 +00:00
Fernando Nasser
39124deab4 2000-11-13 Fernando Nasser <fnasser@redhat.com>
From Orjan Friberg  <orjanf@axis.com>:
        * gdb.base/printcmds.exp: Escape curly braces followed by a number
        in array print pattern match.
2000-11-14 02:36:22 +00:00
Eli Zaretskii
158b3de091 * config/djgpp/config.sed: Fix tweaking "VPATH=.:foo", and handle
the gettext's posrcprefix correctly with drive letters.
2000-11-13 14:24:46 +00:00
Jim Blandy
1300f5dda8 * stabsread.c (read_range_type): Properly construct complex
type nodes.
2000-11-10 23:18:16 +00:00
Fernando Nasser
506419459a 2000-11-10 Fernando Nasser <fnasser@totem.toronto.redhat.com>
* symtab.c (decode_line_1, total_number_of_methods, find_methods,
	build_command_line_spec, find_toplevel_char, decode_line_2):
	Move to linespec.c.
	* linespec.c: New file. Routines that handle linespecs, formerly
	in symtab.c.
	* symtab.h: Export find_line_symtab and find_function_start_sal,
	* Makefile.in: Add linespec.c.
2000-11-10 23:02:56 +00:00
Christopher Faylor
5fbbeb2988 * inferior.h (step_over_calls_kind): New enum to clarify values in
step_over_calls.
* infcmd.c (step_over_calls): Change definition.
(step_1): Use new enum values in relation to step_over_calls.
(step_once): Ditto.
(until_next_command): Ditto.
* infrun.c (clear_proceed_status): Ditto.
(handle_inferior_event): Ditto.
* inferior.h (step_stop_if_no_debug): New variable.
* infrun.c (step_stop_if_no_debug): Declare.
(handle_inferior_event): Stop the step command if we entered a function without
line info.
(_initialize_infrun): New command 'set step-mode' to control the step command.
* infcmd.c (step_once): Switch to stepi mode if there is no line info
(and switching is enabled).
2000-11-10 19:27:45 +00:00
J.T. Conklin
67e0617e6e 2000-11-10 J.T. Conklin <jtc@redback.com>
* target.c (do_xfer_memory): Only perform a single memory transfer
        instead of iterating to tranfer the entire region.  Higher layers
        are expected to call this function multiple times for partial
        transfers.
        (target_xfer_memory_partial): Remove unused local variables.

2000-11-10  Nick Duffek  <nsd@redhat.com>

        * target.c (target_xfer_memory_partial): Return bytes transferred
        instead of 0.
2000-11-10 18:34:21 +00:00
Kevin Buettner
1669605fa3 Protoization. 2000-11-10 01:19:47 +00:00
Kevin Buettner
e2a44558ad Add code for relocating dynamic executables. 2000-11-10 01:07:59 +00:00
Fernando Nasser
a9e2e984e2 2000-11-09 Fernando Nasser <fnasser@redhat.com>
* gdb.c++/templates.exp (test_template_breakpoints): Change Britsh
        spelling "cancelled" to U.S. spelling "canceled" to match changes
        made to gdb.
        * gdb.c++/ovldbreak.exp: Ditto.
2000-11-09 23:29:20 +00:00
J.T. Conklin
74e0dee8a1 * config/i386/nbsd.mh: Remove solib.o, solib-svr4.o from NATDEPFILES.
* config/i386/nbsdelf.mh: Likewise.
* config/m68k/nbsd.mh: Likewise.
* config/ns32k/nbsd.mh: Likewise.
* config/powerpc/nbsd.mh: Likewise.
* config/sparc/nbsd.mh: Likewise.
* config/sparc/nbsdelf.mh: Likewise.
* config/i386/nbsd.mt: Add solib.o, solib-svr4.o to TDEPFILES.
* config/i386/nbsdelf.mt: Likewise.
* config/m68k/nbsd.mt: Likewise.
* config/ns32k/nbsd.mt: Likewise.
* config/powerpc/nbsd.mt: Likewise.
* config/sparc/nbsd.mt: Likewise.
2000-11-09 22:57:03 +00:00
Peter Schauer
63f58cc529 Add auto-solib-add support for AIX, remove obsolete and unused
SOLIB_SYMBOLS_MANUAL code, cleanup of AIX shared library handling code.
	* rs6000-nat.c (vmap_symtab):  Do not try to modify offsets
	if symbols are not yet loaded.
	(vmap_add_symbols):  New function to add symbols for a vmap entry.
	(add_vmap):  Turn errors into warnings, return NULL vmap upon
	failure. Add symbols via vmap_add_symbols only if requested.
	(xcoff_relocate_core):  Allow debugging of core files without an
	executable file. Handle NULL returns from add_vmap gracefully.
	* xcoffsolib.c (solib_add):  Remove, no longer needed.
	(solib_info):  Do not check for new shared libraries if there is no
	inferior process.
	(sharedlibrary_command):  Made static.
	Do not check for new shared libraries if there is no inferior process.
	Add symbols for requested shared libraries via vmap_add_symbols.
	(_initialize_solib):  Add `set auto-solib-add' command.
	* xcoffsolib.h (vmap_add_symbols):  Add prototype declaration.

	* config/rs6000/tm-rs6000.h (PC_LOAD_SEGMENT):  Move from here ...
	* config/rs6000/nm-rs6000.h:  ... to here, this is an AIX native
	feature.
	* config/powerpc/tm-macos.h, config/powerpc/tm-ppc-eabi.h,
	config/powerpc/tm-ppc-nw.h, config/rs6000/tm-rs6000ly.h:
	Remove #undef PC_LOAD_SEGMENT.
	* config/powerpc/aix.mt, config/rs6000/aix4.mt, config/rs6000/rs6000.mt
	(TDEPFILES):  Move xcoffsolib.o from here ...
	* config/powerpc/aix.mh, config/rs6000/aix4.mh, config/rs6000/rs6000.mh
	(NATDEPFILES):  ... to here, xcoffsolib.o contains AIX native code
	only.
	* rs6000-tdep.c:  Remove #include xcoffsolib.h, no longer needed.
	* xcoffsolib.h (xcoff_relocate_symtab_hook):  Remove declaration.
	* rs6000-nat.c (_initialize_core_rs6000):  Remove setting of
	xcoff_relocate_symtab_hook, no longer needed.
	* xcoffsolib.c (solib_info, sharedlibrary_command):  Remove
	xcoff_relocate_symtab_hook indirection, call xcoff_relocate_symtab
	directly, as xcoffsolib.c is now compiled in native AIX configurations
	only.
	* Makefile.in:  Update dependencies for rs6000-tdep.o, rs6000-nat.o
	and xcoffsolib.o.
2000-11-09 09:49:00 +00:00
Andrew Cagney
c11c3a98c0 * MAINTAINERS: Specify the vax-dec-vms5.5 target tupple.
* vax-tdep.c: Include "gdbcore.h", "frame.h" and "value.h".
	(vax_print_insn): Change ``d'' to a const char pointer.
2000-11-09 06:48:48 +00:00
Michael Snyder
f44c642f36 2000-11-08 Michael Snyder <msnyder@cleaver.cygnus.com>
* gdbarch.sh: Spelling correction: registrary -> registry.
        * gdbarch.c: Ditto.
2000-11-08 23:58:46 +00:00
Andrew Cagney
2765b7984f Work around targets that don't yet define JB_PC or JB_ELEMENT_SIZE. 2000-11-08 12:26:15 +00:00