max-page-size only matters for demand paged executables or shared
libraries, and the ideal size is the largest value used by your
operating system. Values larger than necessary just waste file space
and memory. common-page-size also affects file and memory size,
trading a possible small increase in file size for a decrease in
memory size when the operating system is using a common-page-size
page. With a powerpc max-page-size of 64k and common-page-size of 4k
many executables will use no more memory pages when the system page
size is 4k than an executable linked with -z max-page-size=0x1000,
yet will still run on a system using 64k pages. However, when running
on a system using 64k pages relro protection will not be completely
effective.
Due to the relro problem, powerpc binutils has been using a default
common-page-size of 64k since 2014-12-18 (git commit 04c6a44c7),
leading to complaints about increased file and memory sizes. People
not using relro do have a valid reason to complain..
So this patch introduces an extra back-end value to use as the default
for common-page-size when generating relro executables, and enables
the support for powerpc. Non relro executables will now be generated
with a default common-page-size of 4k.
bfd/
* elf-bfd.h (struct elf_backend_data): Add relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Provide default and
sanity test.
(elfNN_bed): Init relropagesize.
* bfd.c (bfd_emul_get_commonpagesize): Add boolean param to
select relropagesize.
* elf32-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
(ELF_MINPAGESIZE): Don't define.
* elf64-ppc.c (ELF_COMMONPAGESIZE): Define as 0x1000.
(ELF_RELROPAGESIZE): Define as ELF_MAXPAGESIZE.
* bfd-in2.h: Regenerate.
ld/
* ldmain.c (main): Move config.maxpagesize and
config.commonpagesize initialization to..
* ldemul.c (after_parse_default): ..here.
* testsuite/ld-powerpc/ppc476-shared.d: Pass -z common-page-size.
* testsuite/ld-powerpc/ppc476-shared2.d: Likewise.
Enabling shared lib tests showed the powerpc-lynxos target is broken,
and has been for a long time. The breakage happened in a 2005-05-07
patch of mine, git commit 3b36f7e62, I think. There have been no bug
reports I recall so it seems the target is dead. powerpc-windiss is
similarly broken.
This patch fixes the breakage, and puts the targets on the obsolete
list.
bfd/
* config.bfd: Add powerpc-*-lynxos* and powerpc-*-windiss*
to obsolete list.
ld/
* emulparams/elf32ppcwindiss.sh: Rewrite to use elf32ppc.sh.
* emulparams/ppclynx.sh: Likewise.
The gold change is to pick up HJ's PR22318 AC_PLUGINS update. The
ld change is to correct a file I generated from a modified tree.
gold/
* configure: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
This patch adds the analysis part of PLT call optimization, enabling
the code added with the previous patch that actually performs the
optimization.
Gold support is not available yet.
bfd/
* elf64-ppc.c (struct _ppc64_elf_section_data): Add has_pltcall field.
(struct ppc_link_hash_table): Add can_convert_all_inline_plt.
(ppc64_elf_check_relocs): Set has_pltcall.
(ppc64_elf_adjust_dynamic_symbol): Discard some PLT entries.
(ppc64_elf_inline_plt): New function.
(ppc64_elf_size_dynamic_sections): Discard some PLT entries for locals.
* elf64-ppc.h (ppc64_elf_inline_plt): Declare.
* elf32-ppc.c (has_pltcall): Define.
(struct ppc_elf_link_hash_table): Add can_convert_all_inline_plt.
(ppc_elf_check_relocs): Set has_pltcall.
(ppc_elf_inline_plt): New function.
(ppc_elf_adjust_dynamic_symbol): Discard some PLT entries.
(ppc_elf_size_dynamic_sections): Likewise.
* elf32-ppc.h (ppc_elf_inline_plt): Declare.
ld/
* emultempl/ppc64elf.em (no_inline_plt): New var.
(ppc_before_allocation): Call ppc64_elf_inline_plt.
(enum ppc64_opt): Add OPTION_NO_INLINE_OPT.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-inline-optimize.
* emultemps/ppc32elf.em (no_inline_opt): New var.
(prelim_size_sections): New function, extracted from..
(ppc_before_allocation): ..here. Call ppc_elf_inline_plt.
(enum ppc32_opt): Add OPTION_NO_INLINE_OPT.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-inline-optimize.
Necessary if gcc is to use PLT16 relocs to implement -mlongcall, and
there isn't a good technical reason why local symbols should be
excluded from PLT16 support. Non-ifunc local symbol PLT entries go in
a separate section to other PLT entries. In a fixed position
executable they won't need to be relocated, and in a PIE or shared
library I chose to not implement lazy relocation.
bfd/
* elf64-ppc.c (LOCAL_PLT_ENTRY_SIZE): Define.
(struct ppc_stub_hash_entry): Add symtype field.
(PLT_KEEP): Define.
(struct ppc_link_hash_table): Add pltlocal and relpltlocal.
(create_linkage_sections): Create pltlocal and relpltlocal.
(ppc64_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP.
(ppc64_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc64_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
Keep PLT entries for inline calls against locals.
(ppc_build_one_stub): Use pltlocal as appropriate.
(ppc_size_one_stub): Likewise.
(ppc64_elf_size_stubs): Set symtype.
(build_global_entry_stubs_and_plt): Init pltlocal and write
relpltlocal for globals.
(write_plt_relocs_for_local_syms): Likewise for local syms.
(ppc64_elf_relocate_section): Support PLT for local syms.
* elf32-ppc.c (PLT_KEEP): Define.
(struct ppc_elf_link_hash_table): Add pltlocal and relpltlocal.
(ppc_elf_create_glink): Create pltlocal and relpltlocal.
(ppc_elf_check_relocs): Allow PLT relocs on local symbols.
Set PLT_KEEP. Adjust update_local_sym_info call.
(ppc_elf_adjust_dynamic_symbol): Keep PLT entries for inline calls.
(allocate_dynrelocs): Allocate pltlocal and relpltlocal.
(ppc_elf_size_dynamic_sections): Size pltlocal and relpltlocal.
(ppc_elf_relocate_section): Support PLT16 relocs for local syms.
(write_global_sym_plt): Init pltlocal and write relpltlocal.
(ppc_finish_symbols): Likewise for locals.
ld/
* emulparams/elf32ppc.sh (OTHER_RELRO_SECTIONS_2): Add .branch_lt.
(OTHER_GOT_RELOC_SECTIONS): Add .rela.branch_lt.
* testsuite/ld-powerpc/elfv2so.d: Update for symbol/stub reordering.
* testsuite/ld-powerpc/relbrlt.d: Likewise.
* testsuite/ld-powerpc/relbrlt.s: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlstocso.r: Likewise.
gold/
* powerpc.cc (Target_powerpc::lplt_): New variable.
(Target_powerpc::lplt_section): Associated accessor.
(Target_powerpc::plt_off): Handle local non-ifunc symbols.
(Target_powerpc::make_lplt_section): New function.
(Target_powerpc::make_local_plt_entry): New function.
(Powerpc_relobj::do_relocate_sections): Write out lplt.
(Output_data_plt_powerpc::first_plt_entry_offset): Zero for lplt.
(Output_data_plt_powerpc::add_local_entry): New function.
(Output_data_plt_powerpc::do_write): Ignore lplt.
(Target_powerpc::make_iplt_section): Make lplt first.
(Target_powerpc::make_brlt_section): Make .branch_lt relro.
(Target_powerpc::Scan::local): Handle PLT16 relocs.
The current scheme where we output PLT relocs for global symbols in
finish_dynamic_symbol, and PLT relocs for local symbols when
outputting stubs does not work if PLT entries are to be used for
inline PLT sequences against non-dynamic globals or local symbols.
bfd/
* elf64-ppc.c (ppc_build_one_stub): Move output of PLT relocs
for local symbols to..
(write_plt_relocs_for_local_syms): ..here. New function.
(ppc64_elf_finish_dynamic_symbol): Move output of PLT relocs for
global symbols to..
(build_global_entry_stubs_and_plt): ..here. Rename from
build_global_entry_stubs.
(ppc64_elf_build_stubs): Always call build_global_entry_stubs_and_plt.
Call write_plt_relocs_for_local_syms.
* elf32-ppc.c (get_sym_h): New function.
(ppc_elf_relax_section): Use get_sym_h.
(ppc_elf_relocate_section): Move output of PLT relocs and glink
stubs for local symbols to..
(ppc_finish_symbols): ..here. New function.
(ppc_elf_finish_dynamic_symbol): Move output of PLT relocs for
global syms to..
(write_global_sym_plt): ..here. New function.
* elf32-ppc.h (ppc_elf_modify_segment_map): Delete attribute.
(ppc_finish_symbols): Declare.
ld/
* ppc32elf.em (ppc_finish): Call ppc_finish_symbols.
config/plugins.m4 has
if test "$plugins" = "yes"; then
AC_SEARCH_LIBS([dlopen], [dl])
fi
Plugin uses dlsym, but libasan.so only intercepts dlopen, not dlsym:
[hjl@gnu-tools-1 binutils-text]$ nm -D /lib64/libasan.so.4| grep " dl"
0000000000038580 W dlclose
U dl_iterate_phdr
000000000004dc50 W dlopen
U dlsym
U dlvsym
[hjl@gnu-tools-1 binutils-text]$
Testing dlopen for libdl leads to false negative when -fsanitize=address
is used. It results in link failure:
../bfd/.libs/libbfd.a(plugin.o): undefined reference to symbol 'dlsym@@GLIBC_2.16'
dlsym should be used to check if libdl is needed for plugin.
bfd/
PR gas/22318
* configure: Regenerated.
binutils/
PR gas/22318
* configure: Regenerated.
gas/
PR gas/22318
* configure: Regenerated.
gprof/
PR gas/22318
* configure: Regenerated.
ld/
PR gas/22318
* configure: Regenerated.
PR 23030
* emulparams/elf64_ia64.sh (OTHER_READONLY_SECTIONS): Make sure
that the .IA_64.unwind_info and .IA_64.unwind sections are not
subject to garbage collection.
This patch deals with the generation of the import library on the fly.
The implementation is inefficient because the linker makes a lot of
calls to realloc and memmove when importing the symbols in order to
maintain a sorted list of symbols.
This is fixable by relying on the fact that, for every linked DLL,
the list of symbols it exports is already sorted so you can import
them en masse once you have found the insertion point.
ld/
* deffile.h (def_file_add_import_from): Declare.
(def_file_add_import_at): Likewise.
* deffilep.y (fill_in_import): New function extracted from...
(def_file_add_import): ...here. Call it.
(def_file_add_import_from): New function.
(def_file_add_import_at): Likewise.
* pe-dll.c (pe_implied_import_dll): Use an optimized version of the
insertion loop for imported symbols if possible.
This patch deals with the auto-import feature. There are 2 versions
of this feature: the original one, which was piggybacked on the OS
loader with an optional help from the runtime (--enable-auto-import
--enable-runtime-pseudo-reloc-v1) and is still the one mostly
documented in the sources and manual; the enhanced one by Kai Tietz,
which is entirely piggybacked on the runtime (--enable-auto-import
--enable-runtime-pseudo-reloc-v2) and is the default for Mingw and
Cygwin nowadays.
The implementation is inefficient because of pe[p]_find_data_imports:
for every undefined symbol, the function walks the entire set of
relocations for all the input files and does a direct name comparison
for each of them.
This is easily fixable by using a hash-based map for v1 and a simple
hash table for v2. This patch leaves v1 alone and only changes v2.
It also factors out pe[p]_find_data_imports into a common function,
removes old cruft left and right, and attempts to better separate
the implementations of v1 and v2 in the code.
ld/
* emultempl/pe.em (U_SIZE): Delete.
(pe_data_import_dll): Likewise.
(make_import_fixup): Return void, take 4th parameter and pass it down
in call to pe_create_import_fixup.
(pe_find_data_imports): Move to...
(gld_${EMULATION_NAME}_after_open): Run the stdcall fixup pass after
the auto-import pass and add a guard before running the latter.
* emultempl/pep.em (U_SIZE): Delete.
(pep_data_import_dll): Likewise.
(make_import_fixup): Return void, take 4th parameter and pass it down
in call to pe_create_import_fixup.
(pep_find_data_imports): Move to...
(gld_${EMULATION_NAME}_after_open): Run the stdcall fixup pass after
the auto-import pass and add a guard before running the latter.
* pe-dll.c (runtime_pseudp_reloc_v2_init): Change type to bfd_boolean.
(pe_walk_relocs_of_symbol): Rename into...
(pe_walk_relocs): ...this. Add 2 more parameters,4th parameter to the
callback prototype and pass 4th parameter in calls to the callback.
If the import hash table is present, invoke the callback on the reloc
if the symbol name is in the table.
(pe_find_data_imports): ...here. Take 2 parameters. Build an import
hash table for the pseudo-relocation support version 2. When it is
built, walk the relocations only once at the end; when it is not, do
not build a fixup when the symbol isn't part of an import table.
Issue the associated warning only after a first fixup is built.
(tmp_seq2): Delete.
(make_singleton_name_imp): Likewise.
(make_import_fixup_mark): Return const char * and a stable string.
(make_import_fixup_entry): Do not deal with the pseudo-relocation
support version 2.
(make_runtime_pseudo_reloc): Factor out code and fix formatting.
(pe_create_import_fixup): Add 5th parameter. Clearly separate the
pseudo-relocation support version 2 from the rest. Fix formatting.
* pe-dll.h (pe_walk_relocs_of_symbol): Delete.
(pe_find_data_imports): Declare.
(pe_create_import_fixup): Add 5th parameter.
* pep-dll.c (pe_data_import_dll): Delete.
(pe_find_data_imports): Define.
(pe_walk_relocs_of_symbol): Delete.
* pep-dll.h (pep_walk_relocs_of_symbol): Delete.
(pep_find_data_imports): Declare.
(pep_create_import_fixup): Add 5th parameter.
* ld.texinfo (--enable-auto-import): Adjust to new implementation.
Complement commit 86b24e15c4 ("MIPS/LD/testsuite: Correct
comm-data.exp test ABI/emul/endian arrangement") and set LD emulations
correctly for `mips*-*-kfreebsd*-gnu' targets in comm-data.exp, removing
test suite failures:
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/copyreloc common symbol override test
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/nocopyreloc common symbol override test
ld/
* testsuite/ld-mips-elf/comm-data.exp: Correct support for
`mips*-*-kfreebsd*-gnu' targets.
This patch adds the following relocation support into binutils bfd linker.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
This is a regression for the corner case of a hidden symbol in a PIC/PIE
binary which is subject to both a new-style GOTDATA relocation and an
old-style GOT relocation. In this case, depending on the link order,
the R_SPARC_RELATIVE dynamic relocation for the GOT slot needed because
of the old-style relocation can be replaced with R_SPARC_NONE coming
from the GOTDATA relocation.
The fix simply records whether an old-style GOT relocation is seen for a
symbol and prevents the R_SPARC_NONE from being generated in this case.
bfd/
* elfxx-sparc.c (struct _bfd_sparc_elf_link_hash_entry): Add new flag
has_old_style_got_reloc.
(_bfd_sparc_elf_check_relocs) <GOT relocations>: Set it for old-style
relocations. Fix a couple of long lines.
(_bfd_sparc_elf_relocate_section) <R_SPARC_GOTDATA_OP>: Do not generate
a R_SPARC_NONE for the GOT slot if the symbol is also subject to
old-style GOT relocations.
ld/
* testsuite/ld-sparc/sparc.exp: Add test for mixed GOTDATA/GOT relocs.
* testsuite/ld-sparc/gotop-hidden.c: New file.
* testsuite/ld-sparc/got-hidden32.s: Likewise.
* testsuite/ld-sparc/got-hidden64.s: Likewise.
* testsuite/ld-sparc/pass.out: Likewise.
The TLSDESC entry in a lazy procedure linkage table is called indirectly
with "callq *(%rax)". This patch adds an ENDBR64 to support indirect
branch tracking in Intel CET. The TLSDESC PLT entry now looks like:
0xf3, 0x0f, 0x1e, 0xfa, /* endbr64 */
0xff, 0x35, 8, 0, 0, 0, /* pushq GOT+8(%rip) */
0xff, 0x25, 16, 0, 0, 0 /* jmpq *GOT+TDG(%rip) */
The BND prefix isn't needed since MPX isn't used for TLSDESC.
bfd/
PR ld/23000
* elf64-x86-64.c (elf_x86_64_finish_dynamic_sections): Add
ENDBR64 to the TLSDESC PLT entry.
ld/
PR ld/23000
* testsuite/ld-x86-64/tlsdesc.pd: Updated.
Complement commit 8988502d75 ("MIPS/LD/testsuite: Correct dynamic
links with VR4100, VR4300 and VR5000") and commit bf48520113 ("gc.exp:
Fix a typo: $LFLAGS -> $LDFLAGS"), and remove extraneous additional LD
flags explicitly passed to the personality test on invocation. This
passing has accidentally leaked from a WIP version of the former change.
With the actual version committed the $LDFLAGS global variable is used
instead for `run_dump_test' to use implicitly, so that `-call_shared'
precedes `-lpersonality' on the linker's command line, as otherwise a
shared `libpersonality.so' library wouldn't be considered for linking,
causing the test to fail.
ld/
* testsuite/ld-gc/gc.exp: Remove extraneous LD flags from the
personality test.
If a symbol is made dynamic by --dynamic-list, it has non-IR reference.
bfd/
PR ld/22983
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Set
non_ir_ref_dynamic if a symbol is made dynamic by --dynamic-list.
ld/
PR ld/22983
* testsuite/ld-plugin/lto.exp: Run PR ld/22983 test.
* testsuite/ld-plugin/pr22983.d: New file.
* testsuite/ld-plugin/pr22983.t: Likewise.
* testsuite/ld-plugin/pr22983a.c: Likewise.
* testsuite/ld-plugin/pr22983b.c: Likewise.
Extend
commit b7c871edcd
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed May 17 07:57:15 2017 -0700
Mark debug sections referenced by kept debug sections
to handle the local debug definition section.
bfd/
PR ld/20882
* elflink.c (elf_gc_mark_debug_section): Also check the local
debug definition section.
ld/
PR ld/20882
* testsuite/ld-gc/pr20882.d: Also dump and check .debug_abbrev
section.
* testsuite/ld-gc/pr20882b.s: Add .debug_abbrev section.
Following on from PR 22929, I have found the same problem exists with
other ifunc supporting targets too. Plus see this link for the bug
being reported against the s390x binutils for Fedora rawhide:
https://bugzilla.redhat.com/show_bug.cgi?id=1553705
So I am going to check in the patch below which applies the same
change that H.J. made for the x86_64 target to the other affected
targets. (Specifically: S390, AArch64 and Sparc). Plus it adds a new
test to the linker testsuite to make sure that this problem stays
fixed.
bfd * elf64-s390.c (elf_s390_relocate_section): Move check for
relocations against non-allocated sections to before the code that
handles ifunc relocations.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Treat
relocs against IFUNC symbols in non-allocated sections as relocs
against FUNC symbols.
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise.
ld * testsuite/ld-ifunc/ifuncmod5.s: New test. Checks that targets
that support IFUNC symbols can handle relocations against those
symbols in NOTE sections.
* testsuite/ld-ifunc/ifuncmod5.d: New file: Driver for the new
test.
* testsuite/ld-ifunc/ifunc.exp: Run the new test.
When resolving a relocation against IFUNC symbol in a SHT_NOTE section
without SHF_ALLOC, we treat it as relocation against FUNC symbol since
it needs the address of IFUNC symbol, not the address returned by IFUNC
function.
bfd/
PR ld/22929
* elf32-i386.c (elf_i386_relocate_section): Treat relocation
against IFUNC symbol in SHT_NOTE section without SHF_ALLOC as
relocation against FUNC symbol.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
ld/
PR ld/22929
* testsuite/ld-i386/i386.exp: Run PR ld/22929 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22929.d: New file.
* testsuite/ld-i386/pr22929.s: Likewise.
* testsuite/ld-x86-64/pr22929.d: Likewise.
* testsuite/ld-x86-64/pr22929.s: Likewise.
For absolute symbols which are forced local or not dynamic, the ABS relocation
should be resolved at static linking time.
Originally, an RELATIVE/ABS relocation will be generated even for absolution
symbols for the dynamic linker to resolve.
bfd/
2018-03-07 Renlin Li <renlin.li@arm.com>
PR ld/20402
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Check absolute symbol,
and don't emit relocation in specific case.
ld/
2018-03-07 Renlin Li <renlin.li@arm.com>
PR ld/20402
* testsuite/ld-aarch64/aarch64-elf.exp: Run new test.
* testsuite/ld-aarch64/pr20402.s: New.
* testsuite/ld-aarch64/pr20402.d: New.
Currently, when `mips_elf_calculate_relocation' is asked to relocate an
undefined symbol, it reports an error or a warning and immediately
returns without performing the relocation. This is fine if the link
fails, but if unresolved_syms_in_objects == RM_GENERATE_WARNING, the
link will continue and output some unrelocated code, which is a
regression from commit e7e2196da3 ("MIPS/BFD: Correctly report
undefined relocations").
Fix this by continuing after calling the `undefined_symbol' hook unless
this is an error condition.
bfd/
PR ld/21900
* elfxx-mips.c (mips_elf_calculate_relocation): Only return
after calling `undefined_symbol' hook if this is an error
condition. Assume the value of 0 for the symbol requested
otherwise.
ld/
PR ld/21900
* testsuite/ld-mips-elf/undefined-warn.d: New test.
* testsuite/ld-mips-elf/undefined.s: Add padding at the end.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
The problem was the ld expect libiberty/lrealpath() to always return a
path, but in some cases it returns a prefix. It seemed like too much of
an earthquake to propose a fix to lrealpath.
* ldmain.c (main): Remove directory separator, if any, from the
end of the canonicalized sysroot.
This patch adds --enable-separate-code to ld configure to turn on
-z separate-code by default and enables it by default for Linux/x86.
This avoids mixing code pages with data to improve cache performance
as well as security.
To reduce x86-64 executable and shared object sizes, the maximum page
size is reduced from 2MB to 4KB when -z separate-code is turned on by
default. Note: -z max-page-size= can be used to set the maximum page
size.
We compared SPEC CPU 2017 performance before and after this change on
Skylake server. There are no any significant performance changes.
Everything is mostly below +/-1%.
bfd/
* config.in: Regenerated.
* configure: Likewise.
* configure.ac: Add --enable-separate-code.
(DEFAULT_LD_Z_SEPARATE_CODE): New AC_DEFINE_UNQUOTED. Default
to 1 for Linux/x86 targets,
* elf64-x86-64.c (ELF_MAXPAGESIZE): Set to 0x1000 if
DEFAULT_LD_Z_SEPARATE_CODE is 1.
ld/
* NEWS: Mention --enable-separate-code.
* configure.ac: Add --enable-separate-code.
(DEFAULT_LD_Z_SEPARATE_CODE): New AC_DEFINE_UNQUOTED.
* configure.tgt: Default ac_default_ld_z_separate_code to 1 for
Linux/x86 targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.separate_code DEFAULT_LD_Z_SEPARATE_CODE.
Most of the emultempl/*.em error/warning messages do not currently
appear in ld.pot, and fixing that is not simply a matter of adding
missing files to POTFILES. The difficulty is the shell-script
quoting, for example aarch64elf.em:PARSE_AND_LIST_OPTIONS "Don'\''t".
I suppose you could avoid contractions like "don't" but I'm unsure as
to whether gettext could handle everything in the emulparams scripts.
The right thing to do is feed the generated C files to gettext, as
this patch does. The patch just copies what is already done in bfd/
for generated files.
* Makefile.am (EMULATION_FILES, POTFILES): Delete.
(SRC_POTFILES, BLD_POTFILES): Define.
(po/POTFILES.in): Delete rule.
(po/SRC-POTFILES.in, po/BLD-POTFILES.in): New rules.
* configure.ac: Add AC_CONFIG_COMMANDS to create po/Makefile.
* po/Make-in (DISTFILES): Remove POTFILES.in, add SRC-POTFILES.in
and BLD-POTFILES.in.
(POTFILES): Delete.
(SRC-POTFILES, BLD-POTFILES): Define place marker.
(ld.pot): Build from SRC-POTFILES plus BLD-POTFILES.
(distclean, maintainer-clean): Tidy up new files.
(POTFILES, POTFILES.in): Delete rules.
(SRC-POTFILES, BLD-POTFILES, SRC-POTFILES.in, BLD-POTFILES.in):
New rules.
(Makefile): Depend on SRC-POTFILES and BLD-POTFILES.
* po/SRC-POTFILES.in: Rename from po/POTFILES.in.
* po/BLD-POTFILES.in: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
More standarization of error/warning messages. The ARM backend has
some multi-line error messages, which don't fit particularly well with
the GNU coding standard insistence that error messages shouldn't be
capitalized or have a full-stop. I've replaced the line breaks with
semicolons.
So for instance the following
system/path/to/ld: myobject.o: invalid special symbol `foo'.
system/path/to/ld: It must be a global or weak function symbol.
becomes
system/path/to/ld: myobject.o: invalid special symbol `foo'; it must be a global or weak function symbol
bfd/
* elf32-arm.c, * elfnn-aarch64.c: Standardize error/warning messages.
ld/
* testsuite/ld-aarch64/reloc-overflow-bad.d,
* testsuite/ld-arm/attr-merge-9.out,
* testsuite/ld-arm/attr-merge-arch-2.d,
* testsuite/ld-arm/attr-merge-unknown-1.d,
* testsuite/ld-arm/attr-merge-unknown-2.d,
* testsuite/ld-arm/attr-merge-unknown-2r.d,
* testsuite/ld-arm/attr-merge-unknown-3.d,
* testsuite/ld-arm/cmse-implib-errors.out,
* testsuite/ld-arm/cmse-new-earlier-later-implib.out,
* testsuite/ld-arm/cmse-new-implib-no-output.out,
* testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out,
* testsuite/ld-arm/cmse-new-implib.out,
* testsuite/ld-arm/cmse-new-wrong-implib.out,
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out,
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out,
* testsuite/ld-arm/group-relocs-alu-bad-2.d,
* testsuite/ld-arm/group-relocs-alu-bad.d,
* testsuite/ld-arm/group-relocs-ldc-bad-2.d,
* testsuite/ld-arm/group-relocs-ldc-bad.d,
* testsuite/ld-arm/group-relocs-ldr-bad-2.d,
* testsuite/ld-arm/group-relocs-ldr-bad.d,
* testsuite/ld-arm/group-relocs-ldrs-bad-2.d,
* testsuite/ld-arm/group-relocs-ldrs-bad.d,
* testsuite/ld-arm/stm32l4xx-cannot-fix-far-ldm.d: Update.
The GNU coding standard says error messages should be of the form
program:sourcefile:lineno: message
or
program: message
and
"The string message should not begin with a capital letter when it
follows a program name and/or file name, because that isn’t the
beginning of a sentence. (The sentence conceptually starts at the
beginning of the line.) Also, it should not end with a period."
This patch does that for ppc, and removes some British spelling.
I've also switched some error output from using the linker callback
einfo to _bfd_error_handler, due to improved compilation time
argument checking now done for the latter function.
bfd/
* elf32-ppc.c: Standardize error/warning messages. Use
_bfd_error_handler rather than einfo when einfo features not used.
* elf64-ppc.c: Likewise.
ld/
* testsuite/ld-powerpc/attr-gnu-12-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-12.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-13.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-23.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-31.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Update.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Update.
Use the SEC_FIXED_SIZE flag to actually fix the size of `.reginfo' and
`.MIPS.abiflags' sections in `_bfd_mips_elf_always_size_sections', as
originally intended, removing link failures such as:
ld: final link failed: Section has no contents
or:
ld: final link failed: Bad value
or:
ld: foo: .reginfo section size should be 24 bytes, actual size is 32
and assertion failures like:
ld: BFD (GNU Binutils) 2.30.51.20180131 assertion fail .../bfd/elfxx-mips.c:14322
in link scenarios involving a linker script that either creates an
output `.reginfo' or `.MIPS.abiflags' section from scratch or produces
either section from different sections. If such an output section's
size turns out to be incorrect according to the psABI, then the section
is either truncated or padded out to the correct size, as relevant.
This allows people to handle these sections in a link in an unusual way,
while still addressing the issue covered by commit 58807c48a5
("_bfd_mips_elf_final_link: Notify user about wrong .reginfo size").
The original arrangement, coming from an unindentified change made to
what was called `mips_elf_always_size_sections' back then, between
commit 02650bd0a9 ("This adds ABI flags to MIPS/ELF object files.")
and commit 252b5132c7 ("19990502 sourceware import"), also missing
from BFD ChangeLog files, assumed that the output section size is not
going to change after return from `bfd_elf_size_dynamic_sections', the
caller of that function, called in turn from `ldemul_before_allocation'
via `gld${EMULATION_NAME}_before_allocation' in ld/emultempl/elf32.em,
and ultimately from `lang_process'. This is because later on in
`lang_process' processing `lang_size_sections' is called , happily
recalculating the section size, and it has actually already been the
case at the time of commit 252b5132c7 ("19990502 sourceware import"),
so the assumption was clearly incorrect right from the beginning.
bfd/
* elfxx-mips.c (_bfd_mips_elf_always_size_sections): Set
SEC_FIXED_SIZE and SEC_HAS_CONTENTS flags for `.reginfo' and
`.MIPS.abiflags' sections.
(_bfd_mips_elf_final_link): Avoid reading beyond `.reginfo'
section's end.
ld/
* testsuite/ld-mips-elf/reginfo-0.d: New test.
* testsuite/ld-mips-elf/reginfo-0r.d: New test.
* testsuite/ld-mips-elf/reginfo-1.d: New test.
* testsuite/ld-mips-elf/reginfo-1r.d: New test.
* testsuite/ld-mips-elf/reginfo-2.d: New test.
* testsuite/ld-mips-elf/reginfo-2r.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-0.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-0r.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-1.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-1r.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-2.d: New test.
* testsuite/ld-mips-elf/mips-abiflags-2r.d: New test.
* testsuite/ld-mips-elf/reginfo-0.ld: New test linker script.
* testsuite/ld-mips-elf/reginfo-1.ld: New test linker script.
* testsuite/ld-mips-elf/mips-abiflags-0.ld: New test linker
script.
* testsuite/ld-mips-elf/mips-abiflags-1.ld: New test linker
script.
* testsuite/ld-mips-elf/reginfo-1.s: New test source.
* testsuite/ld-mips-elf/reginfo-2.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Define a SEC_FIXED_SIZE section flag for target backends to use for
output sections whose size has been fixed in the psABI. The size of
such sections will not be changed anyhow by the generic linker and it is
up to the target backend to get their size right.
bfd/
* section.c (SEC_FIXED_SIZE): New macro.
* bfd-in2.h: Regenerate.
ld/
* ldlang.c (insert_pad): Do not change output section's size if
SEC_FIXED_SIZE is set in the flags.
(size_input_section): Likewise.
(lang_size_sections_1): Likewise.
(lang_reset_memory_regions): Likewise.
ld-elf/ehdr_start fails with -z separate-code. Since there is no data
LOAD segment before code LOAD segment:
There are 2 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x200000 0x0000000000600000 0x0000000000600000 0x000010 0x000010 R E 0x200000
LOAD 0x400000 0x0000000000800000 0x0000000000800000 0x000008 0x000008 R 0x200000
Section to Segment mapping:
Segment Sections...
00 .text
01 .rodata
the program header isn't included in any LOAD segment. As the result,
reference to __ehdr_start is resolved to zero. Pass --build-id to ld
to add a data LOAD segment before code LOAD segment to put the program
header in the data LOAD segment.
PR ld/22845
* testsuite/ld-elf/ehdr_start.d: Pass --build-id to ld.
-z separate-code creates separate code LOAD segment, aligns it to the
maximum page size and places .plt section before .text section. But
ld-elf/eh4 passes -Ttext 0x400 to linker to place .text section at
address 0x400, which is impossible for linker to accomplish:
$ ld -shared -Ttext 0x400 -z separate-code -o x.so eh4.o
ld: section .eh_frame LMA [0000000000200000,000000000020006b] overlaps section .plt LMA [0000000000200000,000000000020001f]
Since ld-elf/eh4 also checks exact addresses, this patch passes
-z max-page-size=0x200000 -z noseparate-code to ld.
PR ld/22845
* ld-elf/eh4.d: Pass -z max-page-size=0x200000 -z noseparate-code
to ld.
"-z separate-code" generates different addresses. Update these tests
to accept any addresses.
* testsuite/ld-x86-64/bnd-ifunc-1.d: Updated.
* testsuite/ld-x86-64/ilp32-4.d: Likewise.
Add -z noseparate-code -z max-page-size=0x200000 since these tests
check for exact addresses and don't expect extra PT_LOAD segment. But
don't add them to nacl targets since they generate different addresses.
* testsuite/ld-x86-64/x86-64.exp: Add -z noseparate-code
-z max-page-size=0x200000, excluding NaCl target.
These tests fail due to one extra PT_LOAD segment with -z separate-code.
* testsuite/ld-elf/pr19162.d: Add -z noseparate-code.
* testsuite/ld-elf/textaddr1.d: Likewise.
* testsuite/ld-elf/textaddr2.d: Likewise.
* testsuite/ld-elf/textaddr4.d: Likewise.
* testsuite/ld-elf/textaddr6.d: Likewise.
bfd/
* elfnn-riscv.c (riscv_elf_relocate_section): Use bfd_reloc_dangerous
when pcrel_lo reloc has an addend. Use reloc_dangerous callback for
bfd_reloc_dangerous. Use einfo instead of warning callback for errors.
Add %X%P to error messages.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Run pcrel-lo-addend test.
* testsuite/ld-riscv-elf/pcrel-lo-addend.d: New.
* testsuite/ld-riscv-elf/pcrel-lo-addend.s: New.
Since PLT in PDE and PC-relative PLT in PIE can be used as function
address, there is no need for dynamic PC-relative relocation against
a dynamic function definition in PIE. Linker should resolve PC-relative
reference to its PLT address.
NB: i386 has non-PIC PLT and PIC PLT. Only non-PIC PLT in PDE can
be used as function address. PIC PLT in PIE can't be used as
function address.
bfd/
PR ld/22842
* elf32-i386.c (elf_i386_check_relocs): Pass FALSE for non
PC-relative PLT to NEED_DYNAMIC_RELOCATION_P.
* elf64-x86-64.c (elf_x86_64_check_relocs): Create PLT for
R_X86_64_PC32 reloc against dynamic function in data section.
Pass TRUE for PC-relative PLT to NEED_DYNAMIC_RELOCATION_P.
(elf_x86_64_relocate_section): Use PLT for R_X86_64_PC32 reloc
against dynamic function in data section.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Use PLT in PIE as
function address only if pcrel_plt is true.
(_bfd_x86_elf_link_hash_table_create): Set pcrel_plt.
* elfxx-x86.h (NEED_DYNAMIC_RELOCATION_P): Add PCREL_PLT for
PC-relative PLT. If PLT is PC-relative, don't generate dynamic
PC-relative relocation against a function definition in data
secton in PIE. Remove the obsolete comments.
(elf_x86_link_hash_table): Add pcrel_plt.
ld/
PR ld/22842
* testsuite/ld-i386/i386.exp: Run PR ld/22842 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22842a.c: New file.
* testsuite/ld-i386/pr22842b.S: Likewise.
* testsuite/ld-x86-64/pr22842a.c: Likewise.
* testsuite/ld-x86-64/pr22842a.rd: Likewise.
* testsuite/ld-x86-64/pr22842b.S: Likewise.
* testsuite/ld-x86-64/pr22842b.rd: Likewise.
Complement commit d4e5e3c330 ("Use getopt instead of lex and yacc to
parse the command line.") and remove a stale `ldlex_command' prototype
for an inexistent function removed back in 1994.
ld/
* ldlex.h (ldlex_command): Remove prototype.
They should be pr22393-3a.so and pr22393-3a-now.so, not pr22393-2a.so
and pr22393-2a-now.so. Since ld-elf/shared.exp creates pr22393-2a.so
and pr22393-2a-now.so, we won't notice the problem if x86-64.exp runs
after ld-elf/shared.exp.
* testsuite/ld-x86-64/x86-64.exp: Replace pr22393-2a.so and
pr22393-2a-now.so with pr22393-3a.so and pr22393-3a-now.so.
Since there is no need to prepare for PLT branch on x86-64, generate
R_X86_64_PLT32, instead of R_X86_64_PC32, if possible, which can be
used as a marker for 32-bit PC-relative branches.
To compile Linux kernel, this patch:
From: "H.J. Lu" <hjl.tools@gmail.com>
Subject: [PATCH] x86: Treat R_X86_64_PLT32 as R_X86_64_PC32
On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared
objects must use PIC PLT. To use PIC PLT, you need to load
_GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on
x86-64 since x86-64 uses PC-relative PLT.
On x86-64, for 32-bit PC-relative branches, we can generate PLT32
relocation, instead of PC32 relocation, which can also be used as
a marker for 32-bit PC-relative branches. Linker can always reduce
PLT32 relocation to PC32 if function is defined locally. Local
functions should use PC32 relocation. As far as Linux kernel is
concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32
since Linux kernel doesn't use PLT.
is needed. It is available on hjl/plt32/master branch at
https://github.com/hjl-tools/linux
bfd/
PR gas/22791
* elf64-x86-64.c (is_32bit_relative_branch): Removed.
(elf_x86_64_relocate_section): Check PIC relocations in PIE.
Remove is_32bit_relative_branch usage. Disallow PC32 reloc
against protected function in shared object.
gas/
PR gas/22791
* config/tc-i386.c (need_plt32_p): New function.
(output_jump): Generate BFD_RELOC_X86_64_PLT32 if possible.
(md_estimate_size_before_relax): Likewise.
* testsuite/gas/i386/reloc64.d: Updated.
* testsuite/gas/i386/x86-64-jump.d: Likewise.
* testsuite/gas/i386/x86-64-mpx-branch-1.d: Likewise.
* testsuite/gas/i386/x86-64-mpx-branch-2.d: Likewise.
* testsuite/gas/i386/x86-64-relax-2.d: Likewise.
* testsuite/gas/i386/x86-64-relax-3.d: Likewise.
* testsuite/gas/i386/ilp32/reloc64.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
ld/
PR gas/22791
* testsuite/ld-x86-64/mpx1c.rd: Updated.
* testsuite/ld-x86-64/pr22791-1.err: New file.
* testsuite/ld-x86-64/pr22791-1a.c: Likewise.
* testsuite/ld-x86-64/pr22791-1b.s: Likewise.
* testsuite/ld-x86-64/pr22791-2.rd: Likewise.
* testsuite/ld-x86-64/pr22791-2a.s: Likewise.
* testsuite/ld-x86-64/pr22791-2b.c: Likewise.
* testsuite/ld-x86-64/pr22791-2c.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/22791 tests.
This fixes the case where all of a group is removed with ld -r, the
situation in the PR, and failures where part of a group is removed
that contain relocs.
bfd/
PR 22836
* elf.c (_bfd_elf_fixup_group_sections): Account for removed
relocation sections. If size reduces to just the flag word,
remove that too and mark with SEC_EXCLUDE.
* elflink.c (bfd_elf_final_link): Strip empty group sections.
binutils/
* testsuite/binutils-all/group-7.s,
* testsuite/binutils-all/group-7a.d,
* testsuite/binutils-all/group-7b.d,
* testsuite/binutils-all/group-7c.d: New tests.
* testsuite/binutils-all/objcopy.exp: Run them.
ld/
* testsuite/ld-elf/pr22836-2.d,
* testsuite/ld-elf/pr22836-2.s: New test.
lld lays out the relro segment differently to GNU ld, not bothering to
include the first few bytes of .got.plt and padding out to a page at
the end of the segment. This patch teaches binutils to recognize the
different (and somewhat inferior) layout as valid.
bfd/
PR 22829
* elf.c (assign_file_positions_for_non_load_sections): Rewrite
PT_GNU_RELRO setup.
ld/
* testsuite/ld-x86-64/pr14207.d: Adjust relro p_filesz.
This reverts most of commit 1be5d8d3bb.
Left in place are addition of --no-plt-align to some ppc32 ld tests
and the ld.texinfo --no-plt-thread-safe fix.
This is -fpie -pie generating dynamic relocations in the text section,
simply because no TLS transitions are applied in PIE mode. The meat
of the patch is to turn calls to bfd_link_pic (info) in TLS-related code
into !bfd_link_executable (info) and there are quite a lot of them...
bfd/
* elfxx-sparc.c (sparc_elf_tls_transition): Turn call to bfd_link_pic
into call to !bfd_link_executable and tidy up.
(_bfd_sparc_elf_check_relocs): Fix formatting and tidy up.
<R_SPARC_TLS_LE_HIX22>: Turn call to bfd_link_pic into call to
!bfd_link_executable.
<R_SPARC_TLS_IE_HI22>: Likewise.
<GOT relocations>: Remove useless code, tidy and merge blocks.
<R_SPARC_TLS_GD_CALL>: Turn call to bfd_link_pic into call to
!bfd_link_executable.
<R_SPARC_WPLT30>: Tidy up.
(_bfd_sparc_elf_gc_mark_hook): Turn call to bfd_link_pic into call
to !bfd_link_executable.
(allocate_dynrelocs): Likewise.
(_bfd_sparc_elf_relocate_section): Fix formatting and tidy up.
<R_SPARC_TLS_GD_HI22>: Merge into...
<R_SPARC_TLS_GD_LO10>: ...this. Adjust 4th argument in call to
sparc_elf_tls_transition and remove redundant code.
<R_SPARC_TLS_LDM_HI22>: Turn call to bfd_link_pic into call to
!bfd_link_executable.
<R_SPARC_TLS_LDO_HIX22>: Likewise.
<R_SPARC_TLS_LE_HIX22>: Likewise. Tidy up.
<R_SPARC_TLS_LDM_CALL>: Likewise.
<R_SPARC_TLS_GD_CALL>: Likewise. Tidy up.
<R_SPARC_TLS_GD_ADD>: Likewise.
<R_SPARC_TLS_LDM_ADD>: Likewise.
<R_SPARC_TLS_LDO_ADD>: Likewise.
<R_SPARC_TLS_IE_LD>: Likewise.
ld/
* testsuite/ld-elf/tls.exp (AFLAGS_PIC): Define on SPARC.
(pr22263-1): Pass AFLAGS_PIC to the assembler.
* testsuite/ld-sparc/tlspie32.s: Add test for other 3 transitions.
* testsuite/ld-sparc/tlspie32.dd: Adjust to above.
* testsuite/ld-sparc/tlspie64.s: Add test for other 3 transitions.
* testsuite/ld-sparc/tlspie64.dd: Adjust to above.
The assumption that R_AARCH64_ABS16 and R_AARCH64_ABS32 relocation in LP64 abi
will be used to generate an address does not hold for absolute symbol.
In this case, it is a value fixed at static linking time.
The condition to check the relocations is relax to allow absolute symbol and
undefined symbol case.
bfd/
2018-02-05 Renlin Li <renlin.li@arm.com>
PR ld/22764
* elfnn-aarch64.c (elfNN_aarch64_check_relocs): Relax the
R_AARCH64_ABS32 and R_AARCH64_ABS16 for absolute symbol. Apply the
check for writeable section as well.
ld/
2018-02-05 Renlin Li <renlin.li@arm.com>
PR ld/22764
* testsuite/ld-aarch64/emit-relocs-258.s: Define symbol as an address.
* testsuite/ld-aarch64/emit-relocs-259.s: Likewise.
* testsuite/ld-aarch64/aarch64-elf.exp: Run new test.
* testsuite/ld-aarch64/pr22764.s: New.
* testsuite/ld-aarch64/pr22764.d: New.
Since _GLOBAL_OFFSET_TABLE_ may be referenced implicitly on x86,
checking ref_regular_nonweak leaves the unused _GLOBAL_OFFSET_TABLE_
in output. This patch checks explicit GOT references instead.
ld-i386/discarded1.s and ld-x86-64/discarded1.s are updated to avoid
linker optimization which removes GOT references.
bfd/
PR ld/22782
* elf32-i386.c (elf_i386_check_relocs): Set got_referenced if
_GLOBAL_OFFSET_TABLE_ is referenced or GOT is needed to resolve
undefined weak symbol to 0.
* elf64-x86-64.c (elf_x86_64_check_relocs): Set got_referenced
if _GLOBAL_OFFSET_TABLE_ is referenced.
* elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Check
got_referenced instead of ref_regular_nonweak. Remove the
unused _GLOBAL_OFFSET_TABLE_ from symbol table.
* elfxx-x86.h (elf_x86_link_hash_table): Add got_referenced.
ld/
PR ld/22782
* testsuite/ld-i386/discarded1.s: Replace mov with div.
* testsuite/ld-x86-64/discarded1.s: Likewise.
* testsuite/ld-i386/i386.exp: Run pr22782.
* testsuite/ld-i386/load1-nacl.d: Updated for removing
_GLOBAL_OFFSET_TABLE_ from output.
* testsuite/ld-i386/load1.d: Likewise.
* testsuite/ld-x86-64/load1a-nacl.d: Likewise.
* testsuite/ld-x86-64/load1a.d: Likewise.
* testsuite/ld-x86-64/load1b-nacl.d: Likewise.
* testsuite/ld-x86-64/load1b.d: Likewise.
* testsuite/ld-i386/pr22782.d: New file.
* testsuite/ld-i386/pr22782.s: Likewise.
* testsuite/ld-x86-64/pr22782.s: Likewise.
* testsuite/ld-x86-64/pr22782a.d: Likewise.
* testsuite/ld-x86-64/pr22782b.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr22782a and pr22782b.
PR 22762
* scripttempl/pe.sc: Remove PROVIDE()s from __CTOR_LIST__ and
__DTOR_LIST__ symbols. Add a comment explaining why this is
necessary.
* scripttemp/pep.sc: Likewise.
* ld.texinfo (PROVIDE): Add a note about the effect of common
symbols.
Add $AFLAGS_PIC flags for PIC assembly to a number of tests missing them
and remove `tic6x-*-*' XFAIL annotations from them, previously added to
paper over:
.../ld-new: warning: generating a shared library containing non-PID code
error messages produced due to `-mpic -mpid=near' GAS options having not
been used. Such errors now do not happen anymore, removing:
XFAIL: Build shared library for pr14170
XFAIL: PR ld/21703 shared
XFAIL: Build shared library for broken linker script test
XFAIL: Build pr17068.so
XFAIL: -Bsymbolic-functions
XFAIL: Build pr20995.so
XFAIL: Build pr22374 shared library
with `tic6x-elf' and `tic6x-uclinux' targets. These tests now pass all
except for:
FAIL: PR ld/21703 shared
which is now due to a different reason, as follows:
extra regexps in .../ld/testsuite/ld-elf/pr21703-shared.sd starting with "^Symbol table '\.dynsym' contains [0-9]+ entries:$"
EOF from dump.out
FAIL: PR ld/21703 shared
The addition of $AFLAGS_PIC requires the affected test cases to use the
`list' command rather than `{}' characters to create a list, to avoid
the quoting property `{}' also have in TCL. Consequently the change is
slightly more extensive than it could otherwise be.
ld/
* testsuite/ld-elf/shared.exp: Add $AFLAGS_PIC throughout to PIC
assembly builds where missing and remove `tic6x-*-*' XFAIL
markings accordingly.
bfdI would like to fix instances of the following warning, when building
with clang with no special CFLAGS other than -g3 -O0.
/home/emaisin/src/binutils-gdb/bfd/elflink.c:5425:45: error: performing pointer arithmetic on a null pointer has undefined behavior [-Werror,-Wnull-pointer-arithmetic]
return (struct elf_link_hash_entry *) 0 - 1;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
Replacing those with "(struct elf_link_hash_entry *) -1" gets rid of the
warning. I wanted to check that it didn't change the resulting code, so
I tried to build this:
$ cat test.c
int *before()
{
return (int *) 0 - 1;
}
int *after()
{
return (int *) - 1;
}
$ gcc -c test.c -g
$ objdump -d test.o
test.o: file format elf64-x86-64
Disassembly of section .text:
0000000000000000 <before>:
0: 55 push %rbp
1: 48 89 e5 mov %rsp,%rbp
4: 48 c7 c0 fc ff ff ff mov $0xfffffffffffffffc,%rax
b: 5d pop %rbp
c: c3 retq
000000000000000d <after>:
d: 55 push %rbp
e: 48 89 e5 mov %rsp,%rbp
11: 48 c7 c0 ff ff ff ff mov $0xffffffffffffffff,%rax
18: 5d pop %rbp
19: c3 retq
This shows that the previous code doesn't actually return -1 as the
function documentation says, but the new one does, so it's kind of a
bugfix.
bfd * elf64-ppc.c (ppc64_elf_archive_symbol_lookup): Avoid pointer
arithmetic on NULL pointer.
* elflink.c (_bfd_elf_archive_symbol_lookup,
elf_link_add_archive_symbols): Likewise.
ld * ldexp.c (fold_name, exp_fold_tree_1): Avoid pointer arithmetic
on NULL pointer.
Correct LD test suite failures with VR4100, VR4300 and VR5000 bare metal
MIPS/ELF targets which do not default to linking with shared libraries,
which leads to link failures like:
.../ld/ld-new: cannot find -lcomm-data
FAIL: Common symbol override test
or:
.../ld/ld-new: attempted static link of dynamic object `tmpdir/pr14170.so'
FAIL: PR ld/14170
removing:
FAIL: Build pr22471b.so
FAIL: Build pr22471
FAIL: Build pr22649-2b.so
FAIL: Build pr22649-2d.so
FAIL: Build pr22150
FAIL: PR ld/14170
FAIL: --gc-sections with __gxx_personality
test failures.
ld/
* testsuite/ld-elf/comm-data.exp: Pass `-call_shared' to links
involving a shared library for `mips*vr4100*-*-elf*',
`mips*vr4300*-*-elf*' and `mips*vr5000*-*-elf*' targets.
* testsuite/ld-elf/provide-hidden.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-mips-elf/comm-data.exp: Likewise.
Move those ELF shared library tests that are in ld-elf/elf.exp over to
ld-elf/shared.exp, to keep them all together and make the maintenance of
extra flags needed with some targets and shared library builds easier,
and also removing the need for the large:
if { [check_shared_lib_support] } then {
[...]
}
conditional block and consequently reducing indentation, which always
helps with TCL code. No functional change, except for the order of
individual test case execution which has changed accordingly, i.e. the
test results are shuffled.
ld/
* testsuite/ld-elf/elf.exp: Move shared library tests over to...
* testsuite/ld-elf/shared.exp: ... here.
We really need to check for a dynamic def, not only a ref.
See added testcase.
bfd/
* elflink.c (bfd_elf_define_start_stop): Fix check of
def_dynamic.
ld/
* testsuite/ld-elf/pr21964-5.c: New test.
* testsuite/ld-elf/shared.exp: Run it.
Define __start/__stop symbols if they are referenced by shared objects,
not if they are also defined in shared objects.
bfd/
PR ld/21964
* elflink.c (bfd_elf_define_start_stop): Check if __start and
__stop symbols are referenced by shared objects.
ld/
PR ld/21964
* testsuite/ld-elf/pr21964-4.c: New file.
* testsuite/ld-elf/shared.exp: Run pr21964-4 test on Linux.
Fix commit d664fd41e1 ("Ignore dynamic references on forced local
symbols") and use alternative test actions and match patterns to
correctly handle messages like:
.../ld/ld-new: Removing unused section '.reginfo' in file 'tmpdir/pr22649-2b.o'
or:
.../ld/ld-new: Removing unused section '.MIPS.options' in file 'tmpdir/pr22649-2b.o'
produced by LD on MIPS targets, removing:
FAIL: Build pr22649-2c.so
FAIL: Build pr22649-2d.so
test suite failures and tightening checks made with `pr22649-2a.so' and
`pr22649-2b.so' test cases.
Keep the original empty action with `pr22649-2c.so' and `pr22649-2d.so'
links and MIPS/ELF targets though, because for them the linker does not
garbage-collect the `.reginfo' section. This is because the section has
its flags set differently by code in GAS in `md_begin':
if (strncmp (TARGET_OS, "elf", 3) != 0)
flags |= SEC_ALLOC | SEC_LOAD;
and consequently BFD linker code in `_bfd_elf_gc_mark_extra_sections':
else if (((isec->flags & SEC_DEBUGGING) != 0
|| (isec->flags & (SEC_ALLOC | SEC_LOAD | SEC_RELOC)) == 0)
&& elf_next_in_group (isec) == NULL)
isec->gc_mark = 1;
marks these sections to be kept due to their SEC_ALLOC, SEC_LOAD and
SEC_RELOC flags all being zero (`.reginfo' sections never have
relocations attached).
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-2ab-mips.msg: New stderr output.
* testsuite/ld-elf/pr22649-2cd-mips.msg: New stderr output.
* testsuite/ld-elf/shared.exp: Use the new outputs with
`mips*-*-*' targets.
Update `readelf' symbol table dump match patterns to handle SHN_MIPS_DATA
and SHN_MIPS_TEXT special section indexes produced by the IRIX ELF format
variation used with a number of MIPS targets and printed by `readelf' as
PRC[0xff02] and PRC[0xff01] respectively, correcting LD test suite
failures:
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: Common symbol override test (auxiliary shared object build)
extra regexps in .../ld/testsuite/ld-elf/pr21703-shared.sd starting with "^ +[0-9]+: +[0-9a-f]+ +4 +FUNC +GLOBAL +DEFAULT +[0-9] +foo@FOO$"
EOF from dump.out
FAIL: PR ld/21703 shared
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared object build)
observed due to file contents like:
7: 5ffe02e8 0 OBJECT GLOBAL DEFAULT PRC[0xff02] foo
shown by `readelf -s' vs:
+[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo
pattern expected, triggered by widening testing to these targets by commit
05a5feafdd ("Rewrite check_shared_lib_support").
ld/
* testsuite/ld-elf/comm-data1.sd: Alternatively accept
`PRC[0xff02]' in place of a regular section index.
* testsuite/ld-elf/pr21703-shared.sd: Likewise `PRC[0xff01]'.
bfd/
* elflink.c (bfd_elf_define_start_stop): Make __start and __stop
symbols dynamic.
ld/
* testsuite/ld-elf/pr21964-3a.c: New file.
* testsuite/ld-elf/pr21964-3c.c: New file.
* testsuite/ld-elf/shared.exp: Run new __start/__stop testcase.
On the SPARC architecture, you need to pass a special flag to GNU as
when you're assembling PIC/PIE code or else you get a wrong relocation
for the GOT symbol.
ld/
* testsuite/ld-elf/shared.exp (AFLAGS_PIC): Define on SPARC.
(pr22269-1): Pass AFLAGS_PIC to the assembler.
The .dc.a directive has wrong size (32 bits) on SPARC 64-bit because
the assembler sets the correct BFD architecture only at the very end
of the processing and it's too late for the directive. It's fixed by
defining TARGET_MACH and making it return a sensible default value.
gas/
* config/tc-sparc.h (sparc_mach): Declare.
(TARGET_MACH): Define to above.
* config/tc-sparc.c (sparc_mach): New function.
(sparc_md_end): Minor tweak.
ld/
* testsuite/ld-elf/pr22450.d: Remove reference to SPARC64.
Update the ld-mips-elf/comm-data.exp test script to correctly select
emulations for targets using non-traditional MIPS emulation and also
correctly select ABIs for targets that do not support all of them, and
finally use the default endianness selection to benefit targets which
support only one, complementing commit 05a5feafdd ("Rewrite
check_shared_lib_support") and removing numerous test failures such as:
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/copyreloc common symbol override test
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared objectbuild)
FAIL: MIPS o32/nocopyreloc common symbol override test
FAIL: MIPS n32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS n32/copyreloc common symbol override test
FAIL: MIPS n32/nocopyreloc common symbol override test (auxiliary shared objectbuild)
FAIL: MIPS n32/nocopyreloc common symbol override test
due to:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf64btsmip elf64ltsmip
or:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf32ebmip
or:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf32l4300
etc., and:
ERROR: -n32 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n32/copyreloc common symbol override test (auxiliary shared object build)
ERROR: -n32 -march=mips3 -EB -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s: assembly failed
UNRESOLVED: MIPS n32/copyreloc common symbol override test
ERROR: -n32 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n32/nocopyreloc common symbol override test (auxiliary shared object build)
ERROR: -n32 -march=mips3 -EB -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s: assembly failed
UNRESOLVED: MIPS n32/nocopyreloc common symbol override test
due to:
Assembler messages:
Fatal error: selected target format 'elf32-nbigmips' unknown
and:
ERROR: -64 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n64/copyreloc common symbol override test (auxiliary shared object build)
ERROR: -64 -march=mips3 -EB --defsym ELF64=1 -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s:assembly failed
UNRESOLVED: MIPS n64/copyreloc common symbol override test
ERROR: -64 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n64/nocopyreloc common symbol override test (auxiliary shared object build)
ERROR: -64 -march=mips3 -EB --defsym ELF64=1 -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s:assembly failed
UNRESOLVED: MIPS n64/nocopyreloc common symbol override test
due to:
Assembler messages:
Fatal error: no compiled in support for 64 bit object file format
ld/
* testsuite/ld-mips-elf/comm-data.exp: Correct support for
targets using non-traditional MIPS emulation or having a limited
selection of ABIs available. Don't force big endianness, use
defaults.
Skip static executable tests if static executable is unsupported.
Tested on Linux/x86 without libc.a.
PR ld/22732
* testsuite/config/default.exp (STATIC_LDFLAGS): New. Set to
"-static" if target compiler supports it.
* testsuite/ld-bootstrap/bootstrap.exp: Skip static executable
tests if target compiler doesn't support it.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Likewise.
(run_cc_link_tests): Likewise.
Since dummy.o must be placed before
-Wl,--whole-archive tmpdir/pr22751.a -Wl,--no-whole-archive
to trigger the bug, this patch adds an optional trailing ld options to
run_ld_link_exec_tests.
PR ld/22751
* testsuite/config/default.exp (INT128_CFLAGS): New.
* testsuite/ld-plugin/lto.exp (INT128_CFLAGS): New.
Run ld/22751 tests.
* testsuite/ld-plugin/pr22751.c: New file.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Add
ld trailing options.
So what was happening was that the file added from libgcc.a during the
rescan was not put on file_chain. map_input_to_output_sections then
doesn't see the file and its sections are treated as discarded.
The file_chain list pointer bug was caused by that fact that an
archive element claimed by the plugin does not have my_archive set.
Or more correctly, the actual archive element does have my_archive
set, but this bfd is replaced with a dummy bfd that doesn't have
my_archive set.
PR 22751
* ldlang.c (find_rescan_insertion): Look past bfds with claim_archive
set.
Fix an issue with commit 73934d319d ("Disable .gnu.hash on MIPS
targets"), <https://sourceware.org/ml/binutils/2006-07/msg00341.html>,
which in turn caused a regression with commit 861fb55ab5 ("Defer
allocation of R_MIPS_REL32 GOT slots"),
<https://sourceware.org/ml/binutils/2008-08/msg00096.html>, and use
`mipself.em' as the extra emulation file for `mips-*-windiss' targets,
removing a segmentation fault triggered as `_bfd_mips_elf_final_link'
calls `htab_traverse' to process LA25 stubs with `htab->la25_stubs'
being NULL. This is in turn due to `_bfd_mips_elf_init_stubs' not
having been called, which is only done by `mipself.em'. No LA25 stubs
are supposed to be produced for `mips-*-windiss' targets, however the
internal data structures have to be initialized.
ld/
* emulparams/elf32mipswindiss.sh (EXTRA_EM_FILE): Set to
`mipself'.
There are actually 2 different bugs:
1. TLS transition is broken in PIE mode.
2. TLS is broken in PIC/PIE mode when the __tls_get_addr symbol
is versioned (as is the case on Linux and Solaris at least).
The 1st bug is fixed by reverting the problematic change for now
(note that the associated test doesn't pass on SPARC because of another
issue so there is no formal regression in the testsuite). The 2nd bug
is fixed by changing the call to _bfd_generic_link_add_one_symbol
on __tls_get_addr into a mere lookup in _bfd_sparc_elf_check_relocs.
bfd/
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs) <R_SPARC_TLS_GD_CALL>:
Do a mere lookup of the __tls_get_addr symbol instead of adding it.
Revert
2017-10-19 H.J. Lu <hongjiu.lu@intel.com>
PR ld/22263
* elfxx-sparc.c (sparc_elf_tls_transition): Replace
bfd_link_pic with !bfd_link_executable, !bfd_link_pic with
bfd_link_executable for TLS check.
(_bfd_sparc_elf_check_relocs): Likewise.
(allocate_dynrelocs): Likewise.
(_bfd_sparc_elf_relocate_section): Likewise.
ld/
* testsuite/ld-sparc/sparc.exp (32-bit: Helper shared library):
Link with a version script.
(32-bit: TLS -fpie): New test.
(64-bit: Helper shared library): Link with a version script.
(64-bit: TLS -fpie): New test.
(64-bit: GOTDATA relocations): Pass -Av9 to the assembler.
* testsuite/ld-sparc/tlslib.ver: New file.
* testsuite/ld-sparc/tlspie32.dd: Likewise.
* testsuite/ld-sparc/tlspie32.s: Likewise.
* testsuite/ld-sparc/tlspie64.dd: Likewise.
* testsuite/ld-sparc/tlspie64.s: Likewise.
* testsuite/ld-sparc/tlssunbin32.dd: Adjust for versioned symbol.
* testsuite/ld-sparc/tlssunbin32.rd: Likewise.
* testsuite/ld-sparc/tlssunbin32.sd: Likewise.
* testsuite/ld-sparc/tlssunbin64.dd: Likewise.
* testsuite/ld-sparc/tlssunbin64.rd: Likewise.
* testsuite/ld-sparc/tlssunbin64.sd: Likewise.
We need to check the versioned __tls_get_addr symbol when looking up
"__tls_get_addr".
bfd/
PR ld/22721
* elfxx-x86.c (_bfd_x86_elf_link_check_relocs): Check the
versioned __tls_get_addr symbol.
ld/
PR ld/22721
* testsuite/ld-plugin/lto.exp: Run PR ld/22721 tests.
* testsuite/ld-plugin/pr22721.t: New file.
* testsuite/ld-plugin/pr22721a.s: Likewise.
* testsuite/ld-plugin/pr22721b.c: Likewise.
Also xfail ld-elf/group1.d for Solaris since _GLOBAL_OFFSET_TABLE_ is
always generated for Solaris as a global symbol after
.*: 0+1000 +0 +(NOTYPE|OBJECT) +WEAK +DEFAULT +. foo
instead of appending "#..." which will weaken the test.
* testsuite/ld-elf/group1.d: Also xfail Solaris.
Update ld-elf/linkinfo1[ab].d to accommodate slightly different PLT/GOT
order/layout for Solaris/x86 targets.
* testsuite/ld-elf/linkinfo1a.d: Updated for slightly different
PLT/GOT order/layout for Solaris/x86 targets.
* testsuite/ld-elf/linkinfo1b.d: Likewise.
Since all ELF linkers call check_relocs after opening all inputs, we
can fold after_allocation into before_allocation so that local dynamic
symbols will be placed before global dynamic symbols in .dynsym section.
This fixed:
FAIL: Common symbol override test (auxiliary shared object build)
FAIL: ld-elf/pr19617a
FAIL: ld-elf/pr19698
for i386-solaris2.12 and x86_64-solaris2.12 targets.
PR ld/22728
* emultempl/solaris2.em (elf_solaris2_after_allocation): Fold
into ...
(elf_solaris2_before_allocation): This.
(LDEMUL_AFTER_ALLOCATION): Removed.
Asking for ppc32 plt call stubs to be aligned at 32 byte boundaries
didn't quite work. For ld.bfd they were spaced 32 bytes apart, but
only started on a 16 byte boundary. ld.gold also didn't get it right.
Finding that bug made me check over the ppc64 plt stub alignment,
where I found that negative values for alignment (meaning align to
minimize boundary crossing) were not accepted. Since no one has
complained about that, I guess I could have removed the feature from
ld.bfd documentation, but I've opted instead to correct the code.
I've also added an optional alignment paramenter for ppc32
--plt-align, for some consistency with gold and ppc64 ld.bfd.
bfd/
* elf32-ppc.c (ppc_elf_create_glink): Correct alignment of .glink.
* elf64-ppc.c (ppc64_elf_size_stubs): Handle negative plt_stub_align.
(ppc64_elf_build_stubs): Likewise.
gold/
* powerpc.cc (param_plt_align): New function supplying default
--plt-align values. Use it..
(Stub_table::plt_call_align): ..here, and..
(Output_data_glink::global_entry_align): ..here.
(Stub_table::stub_align): Correct 32-bit minimum alignment.
ld/
* emultempl/ppc32elf.em: Support optional --plt-align arg.
* emultempl/ppc64elf.em: Support negative --plt-align arg.
This is in preparation for the next patch adding Spectre variant 2
mitigation for PowerPC and PowerPC64. Besides tidying code involved
in stub output (to reduce the number of places where bctr is output),
the patch adds some user visible features:
1) PowerPC64 ELFv2 global entry stubs now are aligned under the
control of --plt-align, with a default alignment of 32 bytes.
2) PowerPC64 __glink_PLTresolve is no longer padded out with nops.
3) PowerPC32 PLT stubs are aligned under the control of --plt-align,
with the default alignment being 16 bytes as before.
4) The PowerPC32 branch/nop table emitted before __glink_PLTresolve
is now smaller in many cases. It was sized incorrectly when the
__tls_get_addr_opt stub was used, and unnecessarily included space
for local ifuncs.
bfd/
* elf32-ppc.c (GLINK_ENTRY_SIZE): Add parameters, handle
__tls_get_addr_opt, and alignment sizing.
(TLS_GET_ADDR_GLINK_SIZE): Delete.
(is_nonpic_glink_stub): Don't use GLINK_ENTRY_SIZE.
(ppc_elf_get_synthetic_symtab): Recognize stubs spaced at 4, 6,
or 8 insns.
(ppc_elf_link_hash_table_create): Init new ppc_elf_params field.
(allocate_dynrelocs): Use new GLINK_ENTRY_SIZE.
(ppc_elf_size_dynamic_sections): Likewise. Size branch table
by PLT reloc count.
(write_glink_stub): Handle __tls_get_addr_opt stub.
Pad out to size given by GLINK_ENTRY_SIZE.
(ppc_elf_relocate_section): Adjust write_glink_stub call.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_finish_dynamic_sections): Write PLTresolve without using
insn array since so many need rewriting.
* elf32-ppc.h (struct ppc_elf_params): Add plt_stub_align.
* elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Rename from
GLINK_CALL_STUB_SIZE. Add htab param and evaluate to size without
nops. Adjust all uses.
(ppc64_elf_get_synthetic_symtab): Don't use GLINK_CALL_STUB_SIZE
in glink_vma calculation.
(struct ppc_link_hash_table): Add global_entry section pointer.
(create_linkage_sections): Create separate section for global
entry stubs.
(PPC_LO, PPC_HI, PPC_HA): Move earlier.
(size_global_entry_stubs): Handle sizing for aligned stubs.
(ppc64_elf_size_dynamic_sections): Handle global_entry alloc,
and don't stash end of glink branch table in rawsize.
(ppc_build_one_stub): Rewrite stub size calculations.
(build_global_entry_stubs): Use new section.
(ppc64_elf_build_stubs): Don't pad __glink_PLTresolve with nops.
Build lazy link stubs out to end of section. Build global entry
stubs in new section.
gold/
* options.h (plt_align): Support for PowerPC32 too.
* powerpc.cc (Stub_table::stub_align): Heed --plt-align for 32-bit.
(Stub_table::plt_call_size, branch_stub_size): Tidy.
(Stub_table::plt_call_align): Implement using stub_align.
(Output_data_glink::global_entry_align): New function.
(Output_data_glink::global_entry_off): New function.
(Output_data_glink::global_entry_address): Use global_entry_off.
(Output_data_glink::pltresolve_size): New function, replacing
pltresolve_size_ constant. Update all uses.
(Output_data_glink::add_global_entry): Align offset.
(Output_data_glink::set_final_data_size): Use global_entry_align.
(Stub_table::do_write): Don't pad __glink_PLTrelsolve with nops.
Tidy stub output. Use global_entry_off.
ld/
* emultempl/ppc32elf.em (params): Init new field.
(enum ppc32_opt): New enum to define OPTION_* values. Add
OPTION_PLT_ALIGN and OPTION_NO_PLT_ALIGN.
(PARSE_AND_LIST_LONGOPTS): Handle new options.
(PARSE_AND_LIST_ARGS_CASES): Likewise.
(PARSE_AND_LIST_OPTIONS): Likewise. Break up help output.
* emultempl/ppc64elf.em (ppc_add_stub_section): Init alignment
correctly for negative --plt-stub-align.
* testsuite/ld-powerpc/elfv2exe.d,
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/relbrlt.d,
* testsuite/ld-powerpc/relbrlt.s,
* testsuite/ld-powerpc/tlsexe.d,
* testsuite/ld-powerpc/tlsexe.r,
* testsuite/ld-powerpc/tlsexe32.d,
* testsuite/ld-powerpc/tlsexe32.g,
* testsuite/ld-powerpc/tlsexe32.r,
* testsuite/ld-powerpc/tlsexetoc.d,
* testsuite/ld-powerpc/tlsexetoc.r,
* testsuite/ld-powerpc/tlsopt5_32.d,
* testsuite/ld-powerpc/tlsso.d,
* testsuite/ld-powerpc/tlstocso.d: Update for changed stub order.
When I added this test I said I'd look at fixing more targets.
That hasn't happened yet, so xfail to tidy results.
* testsuite/ld-elf/elf.exp: xfail "pr22374 function pointer
initialization" for currently failing targets.
PowerPC64 has its own mark_dynamic_ref, which needs the same change as
made by d664fd41e1 to the generic ELF version. Some other targets
discard more than just .data, so allow for that too in expected ld
messages.
bfd/
PR ld/22649
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649.msg: Allow other messages.
* testsuite/ld-elf/shared.exp: Check that --gc-sections is
supported before running ld/22649 tests.
Currently we have no obvious way to revert the action of the "-z defs"
command line option. The "--unresolved-symbols=ignore-in-object-files"
does pretty much what is needed, but it is non-obvious and it also
touches the setting for reporting unresolved symbol references from
shared libraries. So I am proposing adding a "-z undefs" option to be
the inverse of "-z defs". (I thought that "-z nodefs" might be
confusing since it implies banning all definitions, rather than
allowing them).
In addition the description of the "-z defs" option in the linker
documentation is misleading in one place, where it says:
'defs'
Disallows undefined symbols in object files. Undefined
symbols in shared libraries are still allowed.
whereas later on it gets it right:
'-z defs'
Report unresolved symbol references from regular object files.
This is done even if the linker is creating a non-symbolic shared
library. The switch '--[no-]allow-shlib-undefined' controls the
behaviour for reporting unresolved references found in shared
libraries being linked in.
* emultempl/elf32.em (_handle_option): Add support for "-z undefs"
as the opposite of "-z defs".
* ld.texinfo: Document the new option. Update the description of
the -z defs option to make it clear that it does generate an error
if an undefined symbol reference is found in an object file whilst
creating a shared library.
* NEWS: Document this new feature.
Although they aren't passed to linker, we should get it right.
* testsuite/ld-elf/pr22393-2a.rd: Replace "-z textonly" with
"-z separate-code".
* testsuite/ld-elf/pr22393-2b.rd: Likewise.
* testsuite/ld-x86-64/pr22393-3a.rd: Likewise.
* testsuite/ld-x86-64/pr22393-3b.rd: Likewise.
The new "-z separate-code" option will generate separate code LOAD
segment which must be in wholly disjoint pages from any other data.
include/
PR ld/22393
* bfdlink.h (bfd_link_info): Add separate_code.
ld/
PR ld/22393
* NEWS: Mention "-z separate-code".
* emultempl/elf32.em (gld${EMULATION_NAME}_get_script): Get
builtin linker scripts and return linker scripts from disk for
"-z separate-code".
(gld${EMULATION_NAME}_handle_option): Handle "-z separate-code"
and "-z noseparate-code".
* genscripts.sh: Generate linker scripts for "-z separate-code".
(LD_FLAG): Set to *textonly for "-z separate-code".
* ld.texinfo: Document "-z separate-code".
* lexsup.c (elf_shlib_list_options): Add linker help messsages
for "-z separate-code" and "-z noseparate-code".
* scripttempl/elf.sc (SEPARATE_TEXT): New
(TEXT_SEGMENT_ALIGN): Likewise.
Use ${TEXT_SEGMENT_ALIGN} to align and pad text segment to
${MAXPAGESIZE}.
We should ignore dynamic references on forced local symbols during
garbage collection since they can never be referenced dynamically.
bfd/
PR ld/22649
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Ignore dynamic
references on forced local symbols.
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-1.s: New file.
* testsuite/ld-elf/pr22649-2a.s: Likewise.
* testsuite/ld-elf/pr22649-2b.s: Likewise.
* testsuite/ld-elf/pr22649.msg: Likewise.
* testsuite/ld-elf/shared.exp: Run ld/22649 tests.
We must keep all PREINIT_ARRAY, INIT_ARRAY as well as FINI_ARRAY sections
for ld -r --gc-sections.
bfd/
PR ld/22677
* elflink.c (bfd_elf_gc_sections): Keep all PREINIT_ARRAY,
INIT_ARRAY as well as FINI_ARRAY sections for ld -r --gc-sections.
ld/
PR ld/22677
* scripttempl/elf.sc (PREINIT_ARRAY): New.
Don't add .preinit_array for ld -r.
* testsuite/ld-elf/pr22677.d: New file.
* testsuite/ld-elf/pr22677.s: Likewise.
Previous commit removed all uses of the defsym field within the linker
expression union. This commit cleans up the now redundant state.
ld/ChangeLog:
* ldexp.h (union etree_union): Remove defsym field.
* ldexp.c (exp_assop): Remove defsym parameter, and use of defsym
parameter.
(exp_assign): Remove passing of defsym parameter.
(exp_defsym): Likewise.
(exp_provide): Likewise.
In a linker script, a sequence like this:
foo = ADDR (.some_section);
bar = foo;
PROVIDE (foo = 0);
will result in 'bar = ADDR (.some_section)' and 'foo = 0', which seems
like incorrect behaviour, foo is clearly defined elsewhere, and so the
PROVIDE should not trigger.
The problem is that an expression like this:
foo = ADDR (.some_section);
can't be evaluated until a late phase of the linker, due to the need
for the section '.some_section' to have been placed, then the PROVIDE
was being marked as being used during an earlier phase. At the end of
the link, both lines:
foo = ADDR (.some_section);
PROVIDE (foo = 0);
are active, and this causes the final value of 'foo' to be 0.
The solution proposed in this commit is that, during earlier phases of
the linker, when we see the expression 'foo = ADDR (.some_section);',
instead of ignoring the expression, we create a "fake" definition of
'foo'. The existence of this "fake" definition prevents the PROVIDE
from being marked used, and during the final phase the real definition
of 'foo' will replace the "fake" definition.
The new test provide-6 covers the exact case described above. The
provide-7 test is similar to the above, but using constant
expressions, this was never broken, but is added here to increase
coverage.
The provide-8 case also didn't fail before this commit, but I did
manage to break this case during development of this patch. This case
was only covered by a mmix test before, so I've added this here to
increase coverage.
ld/ChangeLog:
* ldexp.c (exp_fold_tree_1): Rework condition underwhich provide
nodes are ignored in the tree walk, and move the location at which
we change provide nodes into provided nodes.
(exp_init_os): Add etree_provided.
* testsuite/ld-scripts/provide-6.d: New file.
* testsuite/ld-scripts/provide-6.t: New file.
* testsuite/ld-scripts/provide-7.d: New file.
* testsuite/ld-scripts/provide-7.t: New file.
* testsuite/ld-scripts/provide-8.d: New file.
* testsuite/ld-scripts/provide-8.t: New file.
Find the ld-script/provide-*.d tests using a wildcard, then run them in
a loop. This will make it easier to add more tests in the future. Some
associated clean up is required.
ld/ChangeLog:
* testsuite/ld-scripts/provide-3.d: Add xfail directive.
* testsuite/ld-scripts/provide-4.d: Use new map file name.
* testsuite/ld-scripts/provide-5.d: Use new map file name.
* testsuite/ld-scripts/provide-4-map.d: Renamed to...
* testsuite/ld-scripts/provide-4.map: ...this.
* testsuite/ld-scripts/provide-5-map.d: Renamed to...
* testsuite/ld-scripts/provide-5.map: ...this.
* testsuite/ld-scripts/provide.exp: Move xfail into provide-3.d
file, and run tests in a loop.
Currently when recording a PROVIDE statement in a linker map file we
display something like:
PROVIDE (SYMBOL, VALUE)
However, in a linker script we write these statements like this:
PROVIDE (SYMBOL = VALUE);
This commit changes the output in the map file to be closer to linker
script format, the map file now contains:
PROVIDE (SYMBOL = VALUE)
The ';' is still missing from the end, but map files are not intended
to be valid linker script input, so adding the ';' just seems like
clutter.
ld/ChangeLog:
* ldexp.c (exp_print_tree): Use '=' instead of ',' when printing
PROVIDE statements.
* testsuite/ld-scripts/provide-4.map: Update expected output.
* testsuite/ld-scripts/provide-5.map: Likewise.
elf.sc has
if test -n "${RODATA_ADDR}"; then
RODATA_ADDR="\
SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR}) + SIZEOF_HEADERS"
else
RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
^^^^^^^^^^ Set RODATA_ADDR
RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR})"
^^^^^^^^^^ Set RODATA_ADDR with ${RODATA_ADDR}
fi
if test -n "${SHLIB_RODATA_ADDR}"; then
SHLIB_RODATA_ADDR="\
SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS"
else
SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})"
^^^^^^^^^^ Set SHLIB_RODATA_ADDR
SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
^^^^^^^^^^ Override SHLIB_RODATA_ADDR
fi
The order should be:
if test -n "${SHLIB_RODATA_ADDR}"; then
SHLIB_RODATA_ADDR="\
SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS"
else
SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})"
fi
PR ld/22696
* scripttempl/elf.sc: Fix the order of SHLIB_RODATA_ADDR.
ld/
* emulparams/elf32lriscv-defs.sh (GENERATE_SHLIB_SCRIPT): Move inside
case on $target, and don't set for riscv*-elf targets.
(GENERATE_PIE_SCRIPT): Likewise.
R_AARCH64_ABS64, R_AARCH64_ABS32 and R_AARCH64_ABS16 are data relocations
supported in AArch64 elf ABI.
R_AARCH64_ABS64 under LP64 is allowed in shared object and a dynamic relocation entry
will be generated. This allows the dynamic linker to do further symbol resolution.
R_AARCH64_ABS32 likewise is allowed in shared object, however under ILP32 abi.
The original behavior for R_AARCH64_ABS32 under LP64 is that, it's allowed
in shared object and silently resolved at static linking time.
No dynamic relocation entry is generate for it.
R_AARCH64_ABS16 is allowed in shared object under both L64 and ILP32.
It's resolved at static linking time as well.
Under LP64, the address should be 64-bit. R_AARCH64_ABS32 relocation indicates
an address that is only sized 32 bits which is meaningless in LP64 shared object.
It's useful to error out.
I have checked glibc dynamic linker code, R_AARCH64_ABS16 is not supported at all. So
R_AARCH64_ABS16 should be reject in shared object completely.
In this patch, R_AARCH64_ABS32 is rejected under LP64 in constant section of shared object.
R_AARCH64_ABS16 is rejected in constant section of shared object in both ABI.
This will sometimes provide useful information for buggy code.
PR 22465
* testsuite/ld-elf/interleave.s: Use .data sections and provide
section attrs.
* testsuite/ld-elf/interleave.ld: Discard other sections. Adjust
for changed section names.
elf32-mcore.c has no backend create_dynamic_sections function so can't
support shared libs.
* emulparams/elf32mcore.sh (GENERATE_SHLIB_SCRIPT): Don't define.
PR 22465
binutils/
* objcopy.c (copy_section): New local extra. If isection->lma not
exactly divisible by interleave, then bias from. Also adjust
osection->lma if necessary.
ld/
* testsuite/ld-elf/interleave-0.d, testsuite/ld-elf/interleave-4.d,
* testsuite/ld-elf/interleave.ld, testsuite/ld-elf/interleave.s: New.
These claim to support shared libs when configuring for <target>-linux
(in contrast to <target>-elf which doesn't support shared libs).
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Return true
for frv, lm32, m32r, microblaze, nds32 and or1k linux targets.
This adds the test I was using when testing 60d67dc8.
* testsuite/ld-elfweak/alias.c,
* testsuite/ld-elfweak/alias.dat,
* testsuite/ld-elfweak/aliasmain.c,
* testsuite/ld-elfweak/weakref1.c,
* testsuite/ld-elfweak/weakref2.c: New test.
* testsuite/ld-elfweak/elfweak.exp: Run it. Don't return on fails,
attempt other tests.
In early October, HJ Lu added support for a number of targets to "Dump
dynamic relocation in read-only section with minfo". This extends
that support to more targets, displays the symbol involved, and splits
the existing function that sets TEXTREL into a "readonly_dynrelocs"
and "maybe_set_textrel" function. I'll need "readonly_dynrelocs" if I
ever get around to fixing "pr22374 function pointer initialization"
fails.
am33_2.0, arc, bfin, hppa64, mn10300, and nios2 fail to mark a binary
needing text relocations with DT_TEXTREL. That's not good. xtensa also
fails to do so but complains about "dangerous relocation: dynamic
relocation in read-only section" so I reckon that is fine and have
marked the test as an xfail. The other targets need maintainer
attention.
Curiously, the map file dump wasn't added for x86, so the map test
currently fail on x86. It also fails on alpha, am33_2.0, arc, bfin,
hppa64, ia64, m68k, mips, mn10300, nios2, score and vax. cris
complains with "tmpdir/textrel.o, section .rodata: relocation
R_CRIS_32 should not be used in a shared object; recompile with -fPIC"
so I've marked it as an xfail.
bfd/
* elf32-hppa.c (maybe_set_textrel): Print symbol for map file output.
* elf32-ppc.c (maybe_set_textrel): Likewise.
* elf64-ppc.c (maybe_set_textrel): Likewise.
* elf32-arm.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_arm_readonly_dynrelocs): ..this.
* elf32-lm32.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-m32r.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-metag.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-nds32.c: Delete unnecessary forward declarations.
(readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-or1k.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-sh.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf32-tic6x.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(elf32_tic6x_readonly_dynrelocs): ..this.
* elf32-tilepro.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elf64-s390.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfnn-aarch64.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing..
(aarch64_readonly_readonly_dynrelocs): ..this.
* elfnn-riscv.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-sparc.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
* elfxx-tilegx.c (readonly_dynrelocs): New function.
(maybe_set_textrel): New function, replacing old version of..
(readonly_dynrelocs): ..this.
ld/
* testsuite/ld-elf/shared.exp: Run new textrel tests.
* testsuite/ld-elf/textrel.map: New file.
* testsuite/ld-elf/textrel.rd: New file.
* testsuite/ld-elf/textrel.s: New file.
* testsuite/ld-elf/textrel.warn: New file.
ASFLAGS should be restored after any modification. Fixes
metag-linux +FAIL: Long branch stub
metag-linux +FAIL: Long branch stub (PIC, app)
mn10300-elf +FAIL: difference of two same-section symbols where the difference is held in another section
mn10300-elf +FAIL: relaxation and alignment directives
PR 22471
* testsuite/ld-elf/shared.exp: Save and restore ASFLAGS.
bfd/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
binutils/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gas/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gold/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
gprof/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
ld/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
opcodes/
* po/Make-in (datadir): Define as @datadir@.
(localedir): Define as @localedir@.
(gnulocaledir, gettextsrcdir): Use @datarootdir@.
This patch processes linker script assignment statements before ld
opens DT_NEEDED libraries, in order to define symbols like __bss_start
that might also be defined by a library, falsely triggering an error
about "DSO missing from command line".
The initial value won't be correct when assigning a symbol from dot,
and I make no attempt to handle all expressions. For example, an
assignment like "_start_foo = ADDR (.foo)" isn't valid until sections
are laid out, so won't define _start_foo early. What's here should be
enough for most common scripts, and hopefully won't perturb fragile
scripts.
bfd/
PR 22471
* elflink.c (_bfd_elf_merge_symbol): Allow weak symbols to override
early passes over linker script symbols.
* linker.c (_bfd_generic_link_add_one_symbol): Allow symbols to
override early passes over linker script symbols. Clear ldscript_def
on symbol definitions.
ld/
PR 22471
* ldexp.c (struct definedness_hash_entry): Delete "by_script". Make
"iteration" an 8-bit field, and update mask in all uses.
(definedness_newfunc): Don't init "by_script".
(update_definedness): Test ldscript_def rather than by_script.
(is_sym_value): Likewise.
(fold_name <DEFINED>): Return a result for first phase. Test
ldscript_def.
(fold_name <NAME>): Return a result for first phase.
* ldlang.c (open_input_bfds): Process all assignments, not just
defsym.
(lang_process): Increment lang_statement_iteration before
open_input_bfds.
* testsuite/ld-mips-elf/tlsdyn-o32-1.d: Adjust for larger .dynsym.
* testsuite/ld-mips-elf/tlsdyn-o32-1.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-2.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-2.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-3.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-3.got: Likewise.
There is a call to update_definedness between code that evaluates an
assignment expression value and code that transfers symbol
attributes. When script assignment expressions contain DEFINED, that
can mean the wrong symbol type is copied. This patch tracks symbols
read during expression evaluation, rather than examining the
expression and re-evaluating conditionals. Not only does this
simplify the code, it also means ld can now copy symbol types in more
complex expressions.
An unfortunate side effect of copying symbol type for more complex
expressions affects mmix, which uses
PROVIDE (Main = DEFINED (Main) ? Main : (DEFINED (_start) ? _start : _start.));
in a default script. So now _start or _start. symbol type may be
copied, losing the function type specially set up for Main. This can
be avoided by making bfd_copy_link_hash_symbol_type do nothing for
mmix.
bfd/
* elf64-mmix.c (bfd_elf64_bfd_copy_link_hash_symbol_type): Define.
ld/
* ldexp.h (struct ldexp_control): Add "assign_src".
* ldexp.c (fold_trinary): Save and restore assign_src around
condition evaluation.
(fold_name <NAME>): Set expld.assign_src.
(try_copy_symbol_type): Delete.
(exp_fold_tree_1): Set symbol type using expld.assign_src.
If linker plugin is enabled, set non_ir_ref_regular on symbols referenced
in regular objects so that linker plugin will get the correct symbol
resolution.
bfd/
PR ld/22502
* elflink.c (_bfd_elf_merge_symbol): Also skip definition from
an IR object.
(elf_link_add_object_symbols): If linker plugin is enabled, set
non_ir_ref_regular on symbols referenced in regular objects so
that linker plugin will get the correct symbol resolution.
ld/
PR ld/22502
* testsuite/ld-plugin/lto.exp: Run PR ld/22502 test.
* testsuite/ld-plugin/pr22502a.c: New file.
* testsuite/ld-plugin/pr22502b.c: Likewise.
We also need to provide __start_scnfoo and __stop_scnfoo with the extra
leading underscore for underscore targets.
This patch fixed:
FAIL: ld-elf/pr21562k
FAIL: ld-elf/pr21562l
FAIL: ld-elf/pr21562m
FAIL: ld-elf/pr21562n
for metag-linux,
* testsuite/ld-elf/pr21562c.t: Also provide ___start_scnfoo and
___stop_scnfoo.
* testsuite/ld-elf/pr21562d.t: Likewise.
In the latest git version of mingw-w64, one can set the default
libmsvcrt.a to actually be the import library of another CRT version,
to facilitate switching to ucrtbase.dll. In these versions, the
traditional libmsvcrt.a (for linking to msvcrt.dll) is also provided
with the name libmsvcrt-os.a.
The import libraries for the CRT also contain a number of compatibility
wrapper functions. The ones in libmsvcrt.a have so far been excluded
automatically since they in most cases come with a corresponding
__imp_foo function. None of these make sense to export automatically
from a DLL though, so add these libraries to the exclude list.
libucrtbase.a contains a number of compatibility wrapper functions
that don't have a corresponding __imp_foo symbol, which cause
these symbols to be exported from DLLs.
This can be worked around on the mingw-w64 side by adding extra
__imp_ symbols, but since they aren't strictly necessary for linking
to succeed, it's probably better long-term to add these libraries to
the exclusion list.
ld * pe-dll.c (autofilter_liblist): Add libmsvcrt, libmsvcrt-os and
libucrtbase.
Except for %eip-relative addressing, where we don't have a suitable
relocation type silently wrapping at the 4G boundary, consistently
force use of R_X86_64_32 (in ELF terms) instead of its sign-extending
counterpart. This wasn't right in case there was no base register in
the addressing expression.
PR 22419
* emultempl/v850elf.em (v850_create_output_section_statements):
New function. Generate an error if attempting to convert the
format of the output file.
* testsuite/ld-unique/pr21529.d: Skip for the V850.
* testsuite/ld-elf/pr21884.d: Skip for the V850.
PR 22450
gas * elf-properties.c (_bfd_elf_link_setup_gnu_properties): Skip
objects without a GNU_PROPERTY note section when looking for a bfd
onto which notes can be accumulated.
ld * testsuite/ld-elf/elf.exp: Add --defsym ALIGN=2|3 to assembler
command line depending upon the size of the target address space.
* testsuite/ld-elf/pr22450.s: New test file.
* testsuite/ld-elf/pr22450.d: New test driver.
* testsuite/config/default.exp: Add note that LD_CLASS refers to
the size of the host linker not the size of the target linker.
Hi Guys,
I am applying the rather large patch attached to this email to enhance
the readelf and objdump programs so that they now have the ability to
follow links to separate debug info files. (As requested by PR
15152). So for example whereas before we had this output:
$ readelf -wi main.exe
Contents of the .debug_info section:
[...]
<15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c)
[...]
With the new option enabled we get:
$ readelf -wiK main.exe
main.exe: Found separate debug info file: dwz.debug
Contents of the .debug_info section (loaded from main.exe):
[...]
<15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c) /home/nickc/Downloads/dwzm
[...]
The link following feature also means that we can get two lots of
output if the same section exists in both the main file and the
separate debug info file:
$ readelf -wiK main.exe
main.exe: Found separate debug info file: dwz.debug
Contents of the .debug_info section (loaded from main.exe):
[...]
Contents of the .debug_info section (loaded from dwz.debug):
[...]
The patch also adds the ability to display the contents of debuglink
sections:
$ readelf -wk main.exe
Contents of the .gnu_debugaltlink section:
Separate debug info file: dwz.debug
Build-ID (0x14 bytes):
c4 a8 89 8d 64 cf 70 8a 35 68 21 f2 ed 24 45 3e 18 7a 7a 93
Naturally there are long versions of these options (=follow-links and
=links). The documentation has been updated as well, and since both
readelf and objdump use the same set of debug display options, I have
moved the text into a separate file. There are also a couple of new
binutils tests to exercise the new behaviour.
There are a couple of missing features in the current patch however,
although I do intend to address them in follow up submissions:
Firstly the code does not check the build-id inside separate debug
info files when it is searching for a file specified by a
.gnu_debugaltlink section. It just assumes that if the file is there,
then it contains the information being sought.
Secondly I have not checked the DWARF-5 version of these link
features, so there will probably be code to add there.
Thirdly I have only implemented link following for the
DW_FORM_GNU_strp_alt format. Other alternate formats (eg
DW_FORM_GNU_ref_alt) have yet to be implemented.
Lastly, whilst implementing this feature I found it necessary to move
some of the global variables used by readelf (eg section_headers) into
a structure that can be passed around. I have moved all of the global
variables that were necessary to get the patch working, but I need to
complete the operation and move the remaining, file-specific variables
(eg dynamic_strings).
Cheers
Nick
binutils PR 15152
* dwarf.h (enum dwarf_section_display_enum): Add gnu_debuglink,
gnu_debugaltlink and separate_debug_str.
(struct dwarf_section): Add filename field.
Add prototypes for load_separate_debug_file, close_debug_file and
open_debug_file.
* dwarf.c (do_debug_links): New.
(do_follow_links): New.
(separate_debug_file, separate_debug_filename): New.
(fetch_alt_indirect_string): New function. Retrieves a string
from the debug string table in the separate debug info file.
(read_and_display_attr_value): Use it with DW_FORM_GNU_strp_alt.
(load_debug_section_with_follow): New function. Like
load_debug_section, but if the first attempt fails, then tries
again in the separate debug info file.
(introduce): New function.
(process_debug_info): Use load_debug_section_with_follow and
introduce.
(load_debug_info): Likewise.
(display_debug_lines_raw): Likewise.
(display_debug_lines_decoded): Likewise.
(display_debug_macinfo): Likewise.
(display_debug_macro): Likewise.
(display_debug_abbrev): Likewise.
(display_debug_loc): Likewise.
(display_debug_str): Likewise.
(display_debug_aranges): Likewise.
(display_debug_addr); Likewise.
(display_debug_frames): Likewise.
(display_gdb_index): Likewise.
(process_cu_tu_index): Likewise.
(load_cu_tu_indexes): Likewise.
(display_debug_links): New function. Displays the contents of a
.gnu_debuglink or .gnu_debugaltlink section.
(calc_gnu_debuglink_ctc32):New function. Calculates a CRC32
value.
(check_gnu_debuglink): New function. Checks the CRC of a
potential separate debug info file.
(parse_gnu_debuglink): New function. Reads a CRC value out of a
.gnu_debuglink section.
(check_gnu_debugaltlink): New function.
(parse_gnu_debugaltlink): New function. Reads the build-id value
out of a .gnu_debugaltlink section.
(load_separate_debug_info): New function. Finds and loads a
separate debug info file.
(load_separate_debug_file): New function. Attempts to find and
follow a link to a separate debug info file.
(free_debug_memory): Free the separate debug info file
information.
(opts_table): Add "follow-links" and "links".
(dwarf_select_sections_by_letters): Add "k" and "K".
(debug_displays): Reformat. Add .gnu-debuglink and
.gnu_debugaltlink.
Add an extra entry for .debug_str in a separate debug info file.
* doc/binutils.texi: Move description of debug dump features
common to both readelf and objdump into...
* objdump.c (usage): Add -Wk and -WK.
(load_specific_debug_section): Initialise the filename field in
the dwarf_section structure.
(close_debug_file): New function.
(open_debug_file): New function.
(dump_dwarf): Load and dump the separate debug info sections.
* readelf.c (struct filedata): New structure. Contains various
variables that used to be global:
(current_file_size, string_table, string_table_length, elf_header)
(section_headers, program_headers, dump_sects, num_dump_sects):
Move into filedata structure.
(cmdline): New global variable. Contains list of sections to dump
by number, as specified on the command line.
Add filedata parameter to most functions.
(load_debug_section): Load the string table if it has not already
been retrieved.
(close_file): New function.
(close_debug_file): New function.
(open_file): New function.
(open_debug_file): New function.
(process_object): Process sections in any separate debug info files.
* doc/debug.options.texi: New file. Add description of =links and
=follow-links options.
* NEWS: Mention the new feature.
* elfcomm.c: Have the byte gte functions take a const pointer.
* elfcomm.h: Update prototypes.
* testsuite/binutils-all/dw5.W: Update expected output.
* testsuite/binutils-all/objdump.WL: Update expected output.
* testsuite/binutils-all/objdump.exp: Add test of -WK and -Wk.
* testsuite/binutils-all/readelf.exp: Add test of -wK and -wk.
* testsuite/binutils-all/readelf.k: New file.
* testsuite/binutils-all/objdump.Wk: New file.
* testsuite/binutils-all/objdump.WK2: New file.
* testsuite/binutils-all/linkdebug.s: New file.
* testsuite/binutils-all/debuglink.s: New file.
gas * testsuite/gas/avr/large-debug-line-table.d: Update expected
output.
* testsuite/gas/elf/dwarf2-11.d: Likewise.
* testsuite/gas/elf/dwarf2-12.d: Likewise.
* testsuite/gas/elf/dwarf2-13.d: Likewise.
* testsuite/gas/elf/dwarf2-14.d: Likewise.
* testsuite/gas/elf/dwarf2-15.d: Likewise.
* testsuite/gas/elf/dwarf2-16.d: Likewise.
* testsuite/gas/elf/dwarf2-17.d: Likewise.
* testsuite/gas/elf/dwarf2-18.d: Likewise.
* testsuite/gas/elf/dwarf2-5.d: Likewise.
* testsuite/gas/elf/dwarf2-6.d: Likewise.
* testsuite/gas/elf/dwarf2-7.d: Likewise.
ld * testsuite/ld-avr/gc-section-debugline.d: Update expected
output.
To allow translators to reorder values in translated strings. This
should mean that all binutils messages now have support for
reordering.
Note to translators: Not all % letters take arguments, so for example
the following only has two arguments, the two %s strings.
"%P%F: output format %s cannot represent section called %s: %E\n"
You could reorder this if you liked to:
"%P%F: %E: section %2$s cannot be represented in output format %1$s\n"
einfo lacks support for flags, field width, precision and length
modifier (apart from %ld and %lu) so don't try to use them in
translations. Both ld and bfd lack support to use a positional arg
twice. These features could be added if needed..
* ldmisc.c (vfinfo): Support up to 9 positional args.
The fix for the PR is to not use input_section->output_section->owner
to get to the output bfd, but use the output bfd directly since it is
available nowadays in struct bfd_link_info.
I thought it worth warning when non-empty dynamic sections are
discarded too, which meant a tweak to one of the ld tests to avoid the
warning.
bfd/
PR 22431
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Warn on discarding
non-empty dynamic section.
(ppc_build_one_stub): Take elf_gp from output bfd, not output
section owner.
(ppc_size_one_stub, ppc64_elf_next_toc_section): Likewise.
ld/
* testsuite/ld-elf/note-3.t: Don't discard .got.
Extract GNU_RELRO region check into a new funtion and pass a pointer to
seg_align_type to lang_find_relro_sections_1 so that they can also be
used for text-only LOAD segment.
* ldlang.c (lang_size_sections_1): Extract GNU_RELRO region check
into ...
(ldlang_check_relro_region): New function.
(lang_find_relro_sections_1): Add an argument for pointer to
seg_align_type and replace expld.dataseg with the pointer.
(lang_find_relro_sections): Pass address of expld.dataseg to
lang_find_relro_sections_1.
Break lang_size_sections down into separate functions so that they can
also be used for text-only LOAD segment. lang_size_relro_segment will
call lang_size_relro_segment_1 and lang_size_segment for both GNU_RELRO
segment and text-only LOAD segment.
* ldlang.c (lang_size_segment): New function.
(lang_size_relro_segment_1): Likewise.
(lang_size_relro_segment): Likewise.
(lang_size_sections): Rewrite to call lang_size_relro_segment.
Extract DATA_SEGMENT_END/DATA_SEGMENT_ALIGN/DATA_SEGMENT_RELRO_END cases
for GNU_RELRO segment into separate functions so that they can also be
used for text-only LOAD segment.
* ldexp.c (fold_unary): Extract the DATA_SEGMENT_END case to ...
(fold_segment_end): New function.
(fold_binary): Extract the DATA_SEGMENT_ALIGN case to ...
(fold_segment_align): New function.
(fold_binary): Extract the DATA_SEGMENT_RELRO_END case to ...
(fold_segment_relro_end): New function.
Update GNU_RELRO date type so that they can also be used for text-only
LOAD segment.
* ldexp.h (phase_enum): Rename exp_dataseg_none,
exp_dataseg_align_seen, exp_dataseg_relro_seen,
exp_dataseg_end_seen, exp_dataseg_relro_adjust,
exp_dataseg_adjust and exp_dataseg_done to exp_seg_none,
exp_seg_align_seen, exp_seg_relro_seen, exp_seg_end_seen,
exp_seg_relro_adjust, exp_seg_adjust and exp_seg_done.
(relro_enum): Rename exp_dataseg_relro_none,
exp_dataseg_relro_start and exp_dataseg_relro_end to
exp_seg_relro_none, exp_seg_relro_start and exp_seg_relro_end.
(seg_align_type): New struct type.
(ldexp_control): Use seg_align_type.
* ldexp.c (fold_unary): Updated.
(fold_binary): Likewise.
* ldlang.c (strip_excluded_output_sections): Likewise.
(lang_size_sections_1): Likewise.
(lang_size_sections): Likewise.
It was reasonable to mark PT_PHDR segment with PF_X for compatibility
with UnixWare and Solaris linkers 20 years ago. But it is inappropriate
today when the primary OS of GNU ld is Linux. This patch removes PF_X
from PT_PHDR segment as gold does.
Tested natively on Linux/x86 as well as crosss-binutils for alpha-linux,
ia64-linux, powerpc64-linux, powerpc-linux, s390-linux, s390x-linux,
sparc64-linux and sparc-linux.
bfd/
PR ld/22423
* elf.c (_bfd_elf_map_sections_to_segments): Remove PF_X from
PT_PHDR segment.
ld/
PR ld/22423
* testsuite/ld-alpha/tlsbin.rd: Replace "R E " with "R +" for
PT_PHDR segment.
* testsuite/ld-alpha/tlsbinr.rd: Likewise.
* testsuite/ld-ia64/tlsbin.rd: Likewise.
* testsuite/ld-powerpc/tlsexe.r: Likewise.
* testsuite/ld-powerpc/tlsexe32.r: Likewise.
* testsuite/ld-powerpc/tlsexetoc.r: Likewise.
* testsuite/ld-s390/tlsbin.rd: Likewise.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
* testsuite/ld-sparc/tlssunbin32.rd: Likewise.
* testsuite/ld-sparc/tlssunbin64.rd: Likewise.
* testsuite/ld-elf/pr22423.d: New test.
OTHER_PLT_SECTIONS contains sections which should be placed right after
.plt section.
* emulparams/elf32_x86_64.sh (TINY_READONLY_SECTION): Renamed
to ...
(OTHER_PLT_SECTIONS): This.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_iamcu.sh: Likewise.
* emulparams/elf_x86_64.sh: Likewise.
* scripttempl/elf.sc: Place ${OTHER_PLT_SECTIONS} just after
.plt.
binutils has lacked proper pluralization of output messages for a long
time, for example, readelf will display information about a section
that "contains 1 entries" or "There are 1 section headers". Fixing
this properly requires us to use ngettext, because other languages
have different rules to English.
This patch defines macros for ngettext and friends to handle builds
with --disable-nls, and tidies the existing nls support. I've
redefined gettext rather than just defining "_" as dgettext in bfd and
opcodes in case someone wants to use gettext there (which might
conceivably happen with generated code).
bfd/
* sysdep.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
* hosts/alphavms.h (textdomain, bindtextdomain): Likewise.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
opcodes/
* opintl.h: Formatting, comment fixes.
(gettext, ngettext): Redefine when ENABLE_NLS.
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
(_): Define using gettext.
(textdomain, bindtextdomain): Use safer "do nothing".
binutils/
* sysdep.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gas/
* asintl.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
gold/
* system.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
ld/
* ld.h (textdomain, bindtextdomain): Use safer "do nothing".
(ngettext, dngettext, dcngettext): Define when !ENABLE_NLS.
We don't need a PLT entry when function pointer initialization in a
read/write section is the only reference to a given function symbol.
This patch prevents the unnecessary PLT entry, and ensures no dynamic
relocs are emitted when UNDEFWEAK_NO_DYNAMIC_RELOC says so.
bfd/
PR 22374
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Don't create a plt
entry when just a dynamic reloc can serve. Ensure no dynamic
relocations when UNDEFWEAK_NO_DYNAMIC_RELOC by setting non_got_ref.
Expand and move the non_got_ref comment.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Likewise.
ld/
* testsuite/ld-powerpc/ambiguousv2.d: Remove FIXME.
Function pointer references in .data ought to use a dynamic reloc.
There shouldn't be any need for a PLT entry and definitely no copy
reloc.
This test fails on quite a few targets, but isn't something that
anyone should worry about too much. It's really just a missed
optimization.
PR 22374
* testsuite/ld-elf/pr22374a.s,
* testsuite/ld-elf/pr22374b.s,
* testsuite/ld-elf/pr22374-1.r,
* testsuite/ld-elf/pr22374-2.r: New test.
* testsuite/ld-elf/elf.exp: Run it.
* testsuite/ld-elf/elf.exp: Merge some conditionals, a better
name than "shared library for next test", and use xfail arg
of run_ld_link_tests in a few places.
xfail tests for certain targets.
Check shared library support for shared test.
Relax pr21703-r.sd and pr21703-shared.sd with additional "#..." pattern lines.
ld/
* testsuite/ld-elf/elf.exp: xfail pr21703 tests on specific targets.
Only run shared lib test for targets which support it.
* testsuite/ld-elf/pr21703-r.sd: Adjust the expected output.
* testsuite/ld-elf/pr21703-shared.sd: Likewise.
Checked with an arm-none-eabi tester and an arm-none-linux-gnueabi tester with no issues.
* testsuite/ld-arm/cortex-a8-far.d: Update expected disassembly.
* testsuite/ld-arm/farcall-group-size2: Likewise.
* testsuite/ld-arm/farcall-group.d: Likewise.
Some targets prefix global symbols with "_".
bfd/
* archive.c (_bfd_compute_and_write_armap): Match "__gnu_lto_slim"
optionally prefixed with "_".
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
binutils/
* nm.c (filter_symbols): Match "__gnu_lto_slim" optionally prefixed
with "_".
gold/
* symtab.cc (Symbol_table::add_from_relobj): Match "__gnu_lto_slim"
optionally prefixed with "_".
ld/
* testsuite/ld-plugin/lto-3r.d: Match "__gnu_lto_v" optionally
prefixed with "_".
* testsuite/ld-plugin/lto-5r.d: Likewise.
This matches the ISA specification. This also adds two tests: one to
make sure the assembler rejects invalid 'c.lui's, and one to make sure
we only relax valid 'c.lui's.
bfd/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (_bfd_riscv_relax_lui): Don't relax to c.lui
when rd is x0.
include/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* opcode/riscv.h (VALID_RVC_LUI_IMM): c.lui can't load the
immediate 0.
gas/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* testsuite/gas/riscv/c-lui-fail.d: New testcase.
gas/testsuite/gas/riscv/c-lui-fail.l: Likewise.
gas/testsuite/gas/riscv/c-lui-fail.s: Likewise.
gas/testsuite/gas/riscv/riscv.exp: Likewise.
ld/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* ld/testsuite/ld-riscv-elf/c-lui.d: New testcase.
ld/testsuite/ld-riscv-elf/c-lui.s: Likewise.
ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp: New test suite.
The behavior of _bfd_elf_merge_symbol and _bfd_generic_link_add_one_symbol is
inconsistent.
In multiple definition case, _bfd_elf_merge_symbol decided to override the old
symbol definition with the new defintion, (size, type, target data)
In _bfd_generic_link_add_one_symbol, it simply return without doing anything
because of allow-multiple-definition is provided.
This leaves the symbol in a wrong state.
Here, following the documentation, I made this patch to force the old definition
override the new definition if the old symbol is not dynamic or weak.
Because, in those two cases, it's expected to do some merge. I have checked
that, those two cases are properly handled.
bfd/
PR ld/21703
* elflink.c (_bfd_elf_merge_symbol): Handle multiple definition case.
ld/
PR ld/21703
* testsuite/ld-elf/elf.exp: Run new tests.
* testsuite/ld-elf/pr21703-1.s: New.
* testsuite/ld-elf/pr21703-2.s: New.
* testsuite/ld-elf/pr21703-3.s: New.
* testsuite/ld-elf/pr21703-4.s: New.
* testsuite/ld-elf/pr21703-r.sd: New.
* testsuite/ld-elf/pr21703-shared.sd: New.
* testsuite/ld-elf/pr21703.sd: New.
* testsuite/ld-elf/pr21703.ver: New.
For 32-bit BFD, since elf64-x86-64.o isn't compiled in, "-m elf32_x86_64"
never worked. Don't add elf32_x86_64 to supported emulations with 32-bit
BFD.
* configure.tgt (i[3-7]86-*-linux-*): Move elf32_x86_64 from
targ_extra_libpath to targ64_extra_libpath.
PR 22319
bfd * elflink.c (elf_link_output_extsym): Keep global undefined
symbols if they have been marked as needed.
ld * testsuite/ld-elf/pr22310.s: New test source file.
* testsuite/ld-elf/pr22310.d: New test driver.
* testsuite/ld-mmix/undef-3.d: Update expected output from readelf.
* testsuite/ld-elf/shared.exp: Remove kfails.
The test-cases started passing with 5c3261b0e8,
"ELF: Call check_relocs after opening all inputs".
The lists could now be re-concatenated (see other run_ld_link_tests
calls in shared.exp), but are for now left separate to simplify future
kfail/xfailing.
This compile-time test requires a target C compiler to run. It fails
on many targets where ELF backend linkers fail to check undefined weak
symbol in static PIE via UNDEFWEAK_NO_DYNAMIC_RELOC.
PR ld/22269
* testsuite/ld-elf/pr22269-1.rd: New file.
* testsuite/ld-elf/pr22269-1.c: Likewise.
* testsuite/ld-elf/shared.exp: Run pr22269-1.
We currently delete bytes by shifting an entire BFD backwards to
overwrite the bytes we no longer need. The result is that relaxing a
BFD is quadratic time.
This patch adds an additional relocation that specifies a byte range
that will be deleted from the final object file, and adds a relaxation
pass (between the existing passes that delete bytes and the alignment
pass) that actually deletes the bytes. Note that deletion is still
quadratic time, and nothing uses R_RISCV_DELETE yet.
I've been meaning to go convert all the other relaxations to use
R_RISCV_DELETE and then make it faster, but this patch has been sitting
around for months so it looks like that won't happen for a bit. The
PCREL->GPREL relaxation that comes next uses this, and since we've been
using these two patches out of tree since I wrote them months ago I
figure it's better to just get them in now. I (or someone else :)) can
convert all the relocations later...
R_RISCV_DELETE will never be emitted into ELF objects, so therefor isn't
exposed to the rest of binutils. As such, we're not considering this as
part of the ABI.
bfd/ChangeLog
2017-10-19 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv (R_RISCV_DELETE): New define.
(_bfd_riscv_relax_delete): New function.
(perform_relocation): Handle R_RISCV_DELETE.
(_bfd_riscv_relax_section): Likewise.
ld/ChangeLog
2017-10-19 Palmer Dabbelt <palmer@dabbelt.com>
* emultempl/riscvelf.em (riscv_elf_before_allocation): Add a
third relaxation pass.
-z text applies to all dynamic binaries, not just shared libraries.
A lot of the other options needed attention too.
* ld.texinfo (-z): Combine negative options with corresponding
positive option. Sort the table. Expand and correct "combreloc",
"common", "common-page-size", "interpose", "loadfltr",
"max-page-size", "muldefs", "nodefaultlib", "nodelete", "nodlopen",
"nodump", "noextern-protected-data", "now", "origin", and "text".
Don't generate dynamic relocation against weak undefined symbol if it
is resolved to zero. FIXME: UNDEFWEAK_NO_DYNAMIC_RELOC may need to be
checked in more places.
bfd/
PR ld/22269
* elf32-cris.c (cris_elf_relocate_section): Don't generate
dynamic relocation if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
(cris_elf_check_relocs): Don't allocate dynamic relocation
if UNDEFWEAK_NO_DYNAMIC_RELOC is true.
ld/
PR ld/22269
* testsuite/ld-cris/weakhiddso.d: Update and remove R_CRIS_NONE.
A number of targets need dynamic relocs in PIEs for reasons other than
relocating thread variables. The PR is about text relocations, and,
reading between the lines, unnecessary dynamic tprel relocations.
Change the test to check for those conditions rather than no dynamic
relocations
PR ld/22263
* testsuite/ld-elf/tls.exp: Link with -z text.
* testsuite/ld-elf/pr22263-1.rd: Test for tprel relocs.
This compile-time test requires a target C compiler to run. It fails
on many targets where ELF backend linkers incorrectly check bfd_link_pic
for TLS relocations, which should check bfd_link_executable instead.
PR ld/22263
* testsuite/ld-elf/pr22263-1.rd: New file.
* testsuite/ld-elf/pr22263-1a.c: Likewise.
* testsuite/ld-elf/pr22263-1b.c: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.
* reloc.c (enum bfd_reloc_status): Start values at 2.
* bfd-in2.h: Regenerate.
* elfnn-aarch64.c (aarch64_relocate): Invert sense of function, so
that a TRUE return indicates success. Compare the result of
calling _bfd_aarch64_elf_put_addend against bfd_reloc_ok.
(build_one_stub): Change sense of tests against aarch64_relocate
return value.
(elfNN_aarch64_tls_relax): Return bfd_reloc_notsupported, rather
than FALSE, when an error is detected.
(elfNN_aarch64_final_link_relocate): Likewise.
* testsuite/ld-aarch64/pcrel_pic_defined.d: Expect errors not
warnings. Expect errors about unsupported relocations.
* testsuite/ld-aarch64/pcrel_pic_undefined.d: Likewise.
I believe we should be warning if ld is given both --no-dynamic-linker
and -z dynamic-undefined-weak. The two options are contradictory, the
first says an executable has no dynamic interpreter to resolve dynamic
symbols, while the second is asking for dynamic symbols to be emitted.
(And even if a static PIE's relocation code, which is needed to
process R_*_RELATIVE relocs, could process symbols, there are no
DT_NEEDED dynamic objects to define such symbols.)
I also think that dynamic_undefined_weak is the right flag to control
whether undefined weaks are made dynamic, whether in static PIEs or
anywhere else. So force it to 0 for static PIEs, fixing PR 22269 for
powerpc and any other target where the backend usually defaults to
undefined weaks being made dynamic.
This patch introduces regressions. I'd normally not do that, but
these are all in very recently added test cases, or expose bugs in the
x86 backend. The test cases were added after I'd made it known that
this patch or one like it was imminent.
PR 22269
* emultempl/elf32.em (after_parse): Warn on --no-dynamic-linker
-z dynamic-undefined-weak combination. Set dynamic_undefined_weak
to zero when nointerp.
This function shouldn't be called directly, except from backend code.
bfd/
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Call
elf_backend_hide_symbol, not _bfd_elf_link_hash_hide_symbol.
(bfd_elf_define_start_stop): Likewise.
ld/
* emultempl/elf32.em (before_allocation): Call
elf_backend_hide_symbol, not _bfd_elf_link_hash_hide_symbol.
Formatting.
Since undefined weak symbols in static PIE are always resolved to 0 at
run-time, linker should resolve them as 0 at link-time, regardless of
whether "-z dynamic-undefined-weak" is used. "-z dynamic-undefined-weak"
only makes undefined weak symbols dynamic, but doesn't change undefined
weak symbol resolution in static PIE at link-time. These tests currently
pass on x86, but fails on many other targets.
The framework to resolve weak symbols in static PE at link-time is
posted at
https://sourceware.org/ml/binutils/2017-10/msg00087.html
which requires users/hjl/check_relocs branch to call check_relocs after
opening all inputs. I will submit backend patches for failling targets
after merging users/hjl/check_relocs branch next.
* PR ld/22269
* testsuite/ld-elf/pr22269.s: New file.
* testsuite/ld-elf/pr22269a.d: Likewise.
* testsuite/ld-elf/pr22269b.d: Likewise.
Similar as aarch64 backend, arm backend only overrides the decision on undefined
weak symbols. arm backend part already emits necessary relative relocation for
this case.
bfd/
PR ld/21402
* elf32-arm.c (allocate_dynrelocs_for_symbol): Only make undefined weak
symbols into dynamic.
ld/
PR ld/21402
* testsuite/ld-arm/tls-app.d: Update address.
* testsuite/ld-arm/tls-app.r: Remove relocations.
* testsuite/ld-arm/unresolved-1-dyn.d: Update.
There were two copies of earmelf_fuchsia.c dependencies.
* Makefile.am (earmelfb_fuchsia.c): Rename rule from earmelf_fuchsia.c.
* Makefile.in: Regenerate.
Don't allow '~' as the first character in symbol name in linker script.
PR ld/22267
* ldlex.l (SYMBOLNAMECHAR1) New.
(DEFSYMEXP): Replace FILENAMECHAR1 with SYMBOLNAMECHAR1.
(EXPRESSION): Likewise.
* testsuite/ld-scripts/expr.exp: Run pr22267.
* testsuite/ld-scripts/pr22267.d: New file.
* testsuite/ld-scripts/pr22267.s: Likewise.
* testsuite/ld-scripts/pr22267.t: Likewise.
This fixes a wart I've known about for years, but haven't done
anything about because BFD treats relocation sections as an adjunct to
the section they relocate. SHF_GROUP on the section thus implicitly
applies to its relocation section(s), but it is an error that the
reloc sections aren't part of the group.
Like many patches to gas, this wasn't as straightforward as it could
be due to a number of backends, i386, cr16 and others, removing relocs
in tc_get_reloc rather than marking them as "done" earlier in
md_apply_reloc. So it isn't possible for the group support to
reliably detect the presence of relocs by looking at fixups earlier
than write_relocs. However the group support needs to create
signature symbols, and that must be done before the symbol table is
frozen, before write_relocs. So split off the group sizing from
elf_adjust_symtab and put it in elf_frob_file_after_relocs.
bfd/
PR 21167
* elf.c (_bfd_elf_setup_sections): Don't trim reloc sections from
groups.
(_bfd_elf_init_reloc_shdr): Pass sec_hdr, use it to copy SHF_GROUP
flag from section.
(elf_fake_sections): Adjust calls. Exit immediately on failure.
(bfd_elf_set_group_contents): Add associated reloc section indices
to group contents
gas/
PR 21167
* config/obj-elf.c (struct group_list): Delete elt_count.
(groups): New static.
(build_group_lists): Don't count elements.
(elf_adjust_symtab): Use groups rather than auto list. Set up
pointer from group member to SHT_GROUP section. Don't size
SHT_GROUP section or clean up here..
(elf_frob_file_after_relocs): ..do so here instead.
* testsuite/gas/arc/jli-1.d,
* testsuite/gas/elf/groupautob.d,
* testsuite/gas/mips/compact-eh-eb-2.d,
* testsuite/gas/mips/compact-eh-eb-5.d,
* testsuite/gas/mips/compact-eh-el-2.d,
* testsuite/gas/mips/compact-eh-el-5.d: Adjust.
ld/
PR 21167
* testsuite/ld-elf/group9b.d: Adjust for relocs included in group.
* ld.texinfo (-z relro): Expand description.
(DATA_SEGMENT_ALIGN): Note that -z relro is not effective when
running with system page size larger than commonpagesize.
(DATA_SEGMENT_RELRO_END): Be explicit about the alignment.
I am applying a patch that has been lying around in the Fedora
binutils sources for a while. It skips the PR14918 linker test for
ARM based targets. This test checks that libgcc is not included in a
link of an empty executable. This works for most targets, but on the
ARM the crt1.o startup code calls __libc_csu_init which is in
/usr/lib/libc_nonshared.a(elf-init.oS). This in turn needs
__aeabi_unwind_cpp_pr0@@GCC_3.5 which is provided by libgcc_s.so.1,
and so the test fails.
non_ir_ref_dynamic wasn't being set in the case where we have a
versioned dynamic symbol definition with a non-versioned matching IR
symbol.
bfd/
PR 22220
* elflink.c (_bfd_elf_merge_symbol): Set non_ir_ref_dynamic in
a case where plugin_notice isn't called.
ld/
* testsuite/ld-plugin/pr22220.h,
* testsuite/ld-plugin/pr22220lib.cc,
* testsuite/ld-plugin/pr22220lib.ver,
* testsuite/ld-plugin/pr22220main.cc: New test.
* testsuite/ld-plugin/lto.exp: Run it.
Fix commit 647d4de92e ("Test undefined symbols in shared libraries")
and remove "undefined symbols in shared lib (dyn reloc)" test failures
for MIPS and S+core targets.
This test assumes 3 dynamic relocation entries, however the respective
psABIs define an extra single dummy *_NONE relocation at the beginning
of the dynamic relocation table, which results in test output like the
following for MIPS:
Relocation section '.rel.dyn' at offset 0x33c contains 4 entries:
Offset Info Type Sym.Value Sym. Name
00000000 00000000 R_MIPS_NONE
00010364 00000903 R_MIPS_REL32 00000000 undef_pfun
00010360 00000a03 R_MIPS_REL32 00000000 undef_data
00010368 00000b03 R_MIPS_REL32 00000000 undef_notype
and S+core:
Relocation section '.rel.dyn' at offset 0x274 contains 4 entries:
Offset Info Type Sym.Value Sym. Name
00000000 00000000 R_SCORE_NONE
5ffe0464 00000e12 R_SCORE_REL32 00000000 undef_notype
5ffe045c 00000f12 R_SCORE_REL32 00000000 undef_data
5ffe0460 00001012 R_SCORE_REL32 00000000 undef_pfun
targets respectively, and also n64 MIPS targets pad relocation triplets
they use with extra *_NONE relocations, resulting in output like this:
Relocation section '.rel.dyn' at offset 0x4c0 contains 4 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000000000000 R_MIPS_NONE
Type2: R_MIPS_NONE
Type3: R_MIPS_NONE
000000010508 000900001203 R_MIPS_REL32 0000000000000000 undef_pfun
Type2: R_MIPS_64
Type3: R_MIPS_NONE
000000010500 000a00001203 R_MIPS_REL32 0000000000000000 undef_data
Type2: R_MIPS_64
Type3: R_MIPS_NONE
000000010510 000b00001203 R_MIPS_REL32 0000000000000000 undef_notype
Type2: R_MIPS_64
Type3: R_MIPS_NONE
Expect the right number of *_NONE relocations then, and adjust the total
number of relocations expected accordingly.
ld/
* testsuite/ld-undefined/undefined.exp: Correct the dyn reloc
test for MIPS and S+core targets.
PowerPC64 .cfi directives use DW_EH_PE_sdata4 encoding for .eh_frame,
so there is no real reason why .eh_frame should be 8 byte aligned.
gas/
* config/tc-ppc.h (EH_FRAME_ALIGNMENT): Define.
ld/
* testsuite/ld-powerpc/tlsopt5.wf: Update for reduced alignment.
Complement commit 26eebcf553 ("Update OpenBSD/mips64 support"),
<https://sourceware.org/ml/binutils/2005-04/msg00382.html>, which added
OpenBSD/mips64 support to GAS, and also add it to LD, avoiding a build
failure at the configuration stage, like:
*** ld does not support target mips64-unknown-openbsd
*** see ld/configure.tgt for supported targets
make[1]: *** [configure-ld] Error 1
As per OS support only include n64 MIPS emulations, and use the
traditional ones, matching the choice already made with the addition of
GAS support.
ld/
* configure.tgt <mips64el-*-openbsd*, mips64-*-openbsd*>: New
targets.
With -PIE on x86-64, we get
0x000000006ffffffb (FLAGS_1) Flags: GLOBAUDIT PIE
We should allow additional bits in DT_FLAGS_1.
PR ld/22139
* testsuite/ld-elf/globalaudit.rd: Allow additional bits in
DT_FLAGS_1.
bfd/
PR ld/22135
* elf32-i386.c (elf_i386_convert_load_reloc): Add an argument
to indicate if conversion is performed.
(elf_i386_check_relocs): Cache section contents and relocations
if conversion is performed.
* elf64-x86-64.c (elf_x86_64_check_relocs): Cache section
contents and relocations if conversion is performed.
ld/
PR ld/22135
* testsuite/ld-i386/i386.exp: Run pr22135.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22135.d: New file.
* testsuite/ld-i386/pr22135.s: Likewise.
* testsuite/ld-x86-64/pr22135.d: Likewise.
* testsuite/ld-x86-64/pr22135.s: Likewise.
This changes the PowerPC64 --plt-align option to perform the usual
alignment of code as suggested by its name, as well as the previous
behaviour of padding so as to reduce boundary crossing. The old
behaviour is had by using a negative parameter.
The default is also changed to align plt stub code by default to 32
byte boundaries, the point being to get better bctr branch prediction
on power8 and power9 hardware.
bfd/
* elf64-ppp.c (plt_stub_pad): Handle positive and negative
plt_stub_align.
ld/
* ld.texinfo (--plt-align): Describe new behaviour of option.
* emultempl/ppc64elf.em (params): Default plt_stub_align to 5.
* testsuite/ld-powerpc/powerpc.exp: Pass --no-plt-align for
selected tests.
* testsuite/ld-powerpc/relbrlt.d: Pass --no-plt-align.
* testsuite/ld-powerpc/elfv2so.d: Adjust expected output.
After _bfd_i386_elf_convert_load and _bfd_x86_64_elf_convert_load are
removed, elf_i386_convert_load_reloc and elf_x86_64_convert_load_reloc
see __ehdr_start as an undefined symbol when they are called from
check_relocs to convert GOT relocations against local symbols. But
__ehdr_start will be defined as a hidden symbol by linker at the later
stage if it is referenced. This patch marks __ehdr_start as a defined
local symbol at the start of check_relocs if it is referenced and not
defined.
bfd/
PR ld/22115
* elf32-i386.c (elf_i386_convert_load_reloc): Check linker_def.
Don't use UNDEFINED_WEAK_RESOLVED_TO_ZERO.
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Check
linker_def. Don't use UNDEFINED_WEAK_RESOLVED_TO_ZERO.
* elfxx-x86.c (_bfd_x86_elf_link_check_relocs): Set local_ref
and linker_def on __ehdr_start if it is referenced and not
defined.
(_bfd_x86_elf_link_symbol_references_local): Also set local_ref
and return TRUE when building executable, if a symbol has
non-GOT/non-PLT relocations in text section or there is no
dynamic linker.
* elfxx-x86.h (elf_x86_link_hash_entry): Add linker_def.
ld/
PR ld/22115
* ld-i386/i386.exp: Run PR ld/22115 tests,
* ld/testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22115-1.s: New file.
* testsuite/ld-i386/pr22115-1a.d: Likewise.
* testsuite/ld-i386/pr22115-1b.d: Likewise.
* testsuite/ld-i386/pr22115-1c.d: Likewise.
* testsuite/ld-i386/pr22115-1d.d: Likewise.
* testsuite/ld-x86-64/pr22115-1.s: Likewise.
* testsuite/ld-x86-64/pr22115-1a-x32.d: Likewise.
* testsuite/ld-x86-64/pr22115-1a.d: Likewise.
* testsuite/ld-x86-64/pr22115-1b-x32.d: Likewise.
* testsuite/ld-x86-64/pr22115-1b.d: Likewise.
* testsuite/ld-x86-64/pr22115-1c-x32.d: Likewise.
* testsuite/ld-x86-64/pr22115-1c.d: Likewise.
* testsuite/ld-x86-64/pr22115-1d-x32.d: Likewise.
* testsuite/ld-x86-64/pr22115-1d.d: Likewise.
Add R_X86_64_converted_reloc_bit to relocation type to indicate if a
relocation is converted from a GOTPCREL relocation. Linker now generates
failed to convert GOTPCREL relocation; relink with --no-relax
for all cases, including relocations against local symbols.
bfd/
* elf64-x86-64.c (R_X86_64_converted_reloc_bit): New.
(elf_x86_64_info_to_howto): Get the real relocation type by
masking out R_X86_64_converted_reloc_bit.
(elf_x86_64_check_tls_transition): Get the real relocation type
by masking out R_X86_64_converted_reloc_bit.
(elf_x86_64_convert_load_reloc): Set R_X86_64_converted_reloc_bit
instead of setting converted_reloc.
(elf_x86_64_relocate_section): Check R_X86_64_converted_reloc_bit
instead of converted_reloc. Get the real relocation type by
masking out R_X86_64_converted_reloc_bit.
(elf_x86_64_link_setup_gnu_properties): Verify that the value of
R_X86_64_converted_reloc_bit is valid.
* elfxx-x86.h (converted_reloc): Removed.
ld/
* testsuite/ld-x86-64/pr19609-2a.d: Updated.
* testsuite/ld-x86-64/pr19609-2b.d: Likewise.
* testsuite/ld-x86-64/pr19609-4a.d: Likewise.
* testsuite/ld-x86-64/pr19609-4c.d: Likewise.
When GOTPCREL relocation conversion leads to relocation overflow, we
may get a mysterious linker message, like
relocation truncated to fit: R_X86_64_32S against symbol `foo'
This patch changes the linker message to
failed to convert GOTPCREL relocation; relink with --no-relax
bfd/
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Remove the sec
argument. Don't check relocation overflow. Avoid relocation
overflow if --no-relax is used. Set converted_reloc on symbol
if a GOTPCREL relocation is converted.
(elf_x86_64_relocate_section): Issue a fatal error and suggest
--no-relax if GOTPCREL relocation conversion leads to relocation
overflow.
* elfxx-x86.h (elf_x86_link_hash_entry): Add converted_reloc.
ld/
* testsuite/ld-x86-64/pr19609-4e.d: Updated.
* testsuite/ld-x86-64/pr19609-6a.d: Likewise.
We need to set tlsdesc_plt for x86-64 if GOT_TLS_GDESC_P is true when
allocating dynamic relocations so that _bfd_x86_elf_size_dynamic_sections
will generate TLSDESC_PLT and TLSDESC_GOT in x86-64 output.
bfd/
PR ld/22071
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Set tlsdesc_plt
for x86-64 if GOT_TLS_GDESC_P is true.
ld/
PR ld/22071
* testsuite/ld-x86-64/pr22071.d: New file.
* testsuite/ld-x86-64/pr22071.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr22071.
ld ought to be more clever about where it puts LTO recompiled objects.
Ideally the recompiled objects ought to be ordered to the same place
their IR objects were, and files extracted from archives on the second
pass ought to go in the same place as they would if extracted on the
first pass. This patch addresses the archive problem. Without this
fix, objects extracted from archives might be placed after the crt
files intended to go at the end of an executable or shared library,
possibly causing exception handling failures.
* ldlang.h (lang_input_statement_type): Expand comments.
(LANG_FOR_EACH_INPUT_STATEMENT): Rewrite without casts.
* ldlang.c (lang_for_each_input_file): Likewise.
(load_symbols): Set usrdata for archives.
(find_rescan_insertion): New function.
(lang_process): Trim off and reinsert entries added to file chain
when rescanning archives for LTO.
* ldmain.c (add_archive_element): Set my_archive input_statement
next pointer to last element added.
The machinery to do this was there, but not enabled if the terminator
was the only thing in the section.
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Don't exit early
for a section containing just a terminator. Allow multiple
terminators at end of section.
* elflink.c (bfd_elf_discard_info): Iterate over .eh_frame
sections when not adding alignment. Assert on terminator in
the middle of FDEs.
ld/
* testsuite/ld-elf/eh3.d: Update.
* testsuite/ld-elf/eh4.d: Update.
Complement commit 5b5f4e6f8c ("ld: Early detection of orphans we know
will be discarded") and add `.MIPS.options' to the list of sections
discarded with orphan tests, removing failures like:
./ld-new: error: unplaced orphan section `.MIPS.options' from `tmpdir/orphan-11.o'.
FAIL: ld-elf/orphan-11
and:
./ld-new: error: unplaced orphan section `.MIPS.options' from `tmpdir/orphan-12.o'.
FAIL: ld-elf/orphan-12
from n64 MIPS testing.
ld/
* testsuite/ld-elf/orphan-11.ld: Also discard `.MIPS.options'
sections.
Fix a bug in commit a6ebf6169a ("MIPS: Convert cross-mode BAL to
JALX") and in BFD linker relaxation correct the microMIPS interpretation
of the branch offset, which is supposed to be shifted by 1 bit, rather
than 2 as in the regular MIPS case.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Correct microMIPS
branch offset interpretation.
gas/
* testsuite/gas/mips/branch-addend-micromips.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n32.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n64.d: New test.
* testsuite/gas/mips/branch-addend-micromips.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/bal-jalx-addend-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
In the TLS GD/LD to LE optimization, ld replaces a sequence like
addi 3,2,x@got@tlsgd R_PPC64_GOT_TLSGD16 x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
with
addis 3,13,x@tprel@ha R_PPC64_TPREL16_HA x
addi 3,3,x@tprel@l R_PPC64_TPREL16_LO x
nop
When the tprel offset is small, this can be further optimized to
nop
addi 3,13,x@tprel
nop
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add do_tls_opt.
(ppc64_elf_tls_optimize): Set it.
(ppc64_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO and TPREL16_LO_DS relocs to use r13 when
addis would add zero.
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add do_tls_opt.
(ppc_elf_tls_optimize): Set it.
(ppc_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO relocs to use r2 when addis would add zero.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Nop addis on
TPREL16_HA, and convert insn on TPREL16_LO and TPREL16_LO_DS
relocs to use r2/r13 when addis would add zero.
ld/
* testsuite/ld-powerpc/tls.s: Add calls with tls markers.
* testsuite/ld-powerpc/tls32.s: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Run tls marker tests.
* testsuite/ld-powerpc/tls.d: Adjust for TPREL16_HA/LO optimization.
* testsuite/ld-powerpc/tlsexe.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
* testsuite/ld-powerpc/tlsmark.d: Likewise.
* testsuite/ld-powerpc/tlsopt4.d: Likewise.
* testsuite/ld-powerpc/tlstoc.d: Likewise.
There isn't a good reason for ld.bfd to behave differently from gold
in the code generated by TLS GD/LD to LE optimization.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): When optimizing
__tls_get_addr call sequences to LE, don't move the addi down
to the nop. Replace the bl with addi and leave the nop alone.
ld/
* testsuite/ld-powerpc/tls.d: Update.
* testsuite/ld-powerpc/tlsexe.d: Update.
* testsuite/ld-powerpc/tlsexetoc.d: Update.
* testsuite/ld-powerpc/tlsld.d: Update.
* testsuite/ld-powerpc/tlsmark.d: Update.
* testsuite/ld-powerpc/tlsopt4.d: Update.
* testsuite/ld-powerpc/tlstoc.d: Update.
