The FPCCR.TS bit is used to identify if FPU registers are considered
non-secure or secure. If they are secure, then callee saved registers
(S16 to S31) are stacked on exception entry or otherwise skipped.
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
Signed-off-by: Yvan Roux <yvan.roux@foss.st.com>
The function aarch64_print_operand (aarch64-opc.c) is responsible for
converting an instruction operand into the textual representation of
that operand.
In some cases, a comment is included in the operand representation,
though this (currently) only happens for the last operand of the
instruction.
In a future commit I would like to enable the new libopcodes styling
for AArch64, this will allow objdump and GDB[1] to syntax highlight
the disassembler output, however, having operands and comments
combined in a single string like this makes such styling harder.
In this commit, I propose to extend aarch64_print_operand to take a
second buffer. Any comments for the instruction are written into this
extra buffer. The two callers of aarch64_print_operand are then
updated to pass an extra buffer, and print any resulting comment.
In this commit no styling is added, that will come later. However, I
have adjusted the output slightly. Before this commit some comments
would be separated from the instruction operands with a tab character,
while in other cases the comment was separated with two single spaces.
After this commit I use a single tab character in all cases. This
means a few test cases needed updated. If people would prefer me to
move everyone to use the two spaces, then just let me know. Or maybe
there was a good reason why we used a mix of styles, I could probably
figure out a way to maintain the old output exactly if that is
critical.
Other than that, there should be no user visible changes after this
commit.
[1] GDB patches have not been merged yet, but have been posted to the
GDB mailing list:
https://sourceware.org/pipermail/gdb-patches/2022-June/190142.html
When running the gdb.base/break-idempotent.exp test on ppc, I was
seeing some test failures (or rather errors), that looked like this:
(gdb) watch local
Hardware watchpoint 2: local
has_hw_wp_support: Hardware watchpoint detected
ERROR: no fileid for gcc2-power8
ERROR: Couldn't send delete breakpoints to GDB.
ERROR OCCURED: can't read "gdb_spawn_id": no such variable
while executing
"expect {
-i 1000 -timeout 100
-re ".*A problem internal to GDB has been detected" {
fail "$message (GDB internal error)"
gdb_internal_erro..."
("uplevel" body line 1)
invoked from within
What happens is that in break-idempotent.exp we basically do this:
if {[prepare_for_testing "failed to prepare" $binfile $srcfile $opts]} {
continue
}
# ....
if {![skip_hw_watchpoint_tests]} {
test_break $always_inserted "watch"
}
The problem with this is that skip_hw_watchpoint_tests, includes this:
if { [istarget "i?86-*-*"]
|| [istarget "x86_64-*-*"]
|| [istarget "ia64-*-*"]
|| [istarget "arm*-*-*"]
|| [istarget "aarch64*-*-*"]
|| ([istarget "powerpc*-*-linux*"] && [has_hw_wp_support])
|| [istarget "s390*-*-*"] } {
return 0
}
For powerpc only we call has_hw_wp_support. This is a caching proc
that runs a test within GDB to detect if we have hardware watchpoint
support or not.
Unfortunately, to run this test we restart GDB, and when the test has
completed, we exit GDB. This means that in break-idempotent.exp, when
we call skip_hw_watchpoint_tests for the first time on powerpc, GDB
will unexpectedly be exited. When we later call delete_breakpoints we
see the errors I reported above.
The fix is to call skip_hw_watchpoint_tests early, before we start GDB
as part of the break-idempotent.exp script, and store the result in a
variable, we can then check this variable in the script as needed.
After this change break-idempotent.exp runs fine on powerpc.
Co-authored-by: Andrew Burgess <aburgess@redhat.com>
gprofng/ChangeLog
2022-06-28 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
PR gprofng/29131
* gp-display-html/Makefile.am: Set man_MANS only when BUILD_MAN is true.
* src/Makefile.am: Likewise.
* gp-display-html/Makefile.in: Rebuild.
* src/Makefile.in: Rebuild.
commit d0e0f9c87a results "ERROR: i586-linux-cc does not exist" if
cross-building an i586-linux target without a target compiler
installed.
* testsuite/ld-elf/linux-x86.exp (compiler_honours_aligned): New.
Use it after first testing check_compiler_available.
For every stop, Linux GDB and GDBserver save the stopped thread's PC,
in lwp->stop_pc. This is done in save_stop_reason, in both
gdb/linux-nat.c and gdbserver/linux-low.cc. However, while we're
going through the shell after "run", in startup_inferior, we shouldn't
be reading registers, as we haven't yet determined the target's
architecture -- the shell's architecture may not even be the same as
the final inferior's.
In gdb/linux-nat.c, lwp->stop_pc is only needed when the thread has
stopped for a breakpoint, and since when going through the shell, no
breakpoint is going to hit, we could simply teach save_stop_reason to
only record the stop pc when the thread stopped for a breakpoint.
However, in gdbserver/linux-low.cc, lwp->stop_pc is used in more cases
than breakpoint hits (e.g., it's used in tracepoints & the
"while-stepping" feature).
So to avoid GDB vs GDBserver divergence, we apply the same approach to
both implementations.
We set a flag in the inferior (process in GDBserver) whenever it is
being nursed through the shell, and when that flag is set,
save_stop_reason bails out early. While going through the shell,
we'll only ever get process exits (normal or signalled), random
signals, and exec events, so nothing is lost.
Change-Id: If0f01831514d3a74d17efd102875de7d2c6401ad
When building gdb with system gcc 7.5.0, I run into:
...
gdb/ia64-tdep.c: In function ‘int is_float_or_hfa_type_recurse(type*, type**)’:
gdb/ia64-tdep.c:3362:1: error: control reaches end of non-void function \
[-Werror=return-type]
...
This is due to PR gcc/81275 - "-fsanitize=thread produce incorrect
-Wreturn-type warning", which has been fixed in gcc-8.
Work around this by moving the default return outside the switch.
Tested on x86_64-linux.
Even if MS docs say that CP_UTF8 should always be used on newer
applications, forcing it might produce undefined filename if the
encoding isn't UTF-8.
MinGW seems to call ___lc_codepage_func() in order to retrieve the
current thread codepage.
bfd/ChangeLog:
* bfdio.c (_bfd_real_fopen): Retrieve codepage with
___lc_codepage_func() on MinGW.
This patch ensures that the gcc binary called by windres is quoted if
needed. Otherwise, errors can occur if the gcc is under a folder having
a name containing a space (eg "Program Files").
binutils/
* resrc.c (DEFAULT_PREPROCESSOR): Split into...
(DEFAULT_PREPROCESSOR_CMD): that...
(DEFAULT_PREPROCESSOR_ARGS): and that.
(look_for_default): Add quotes around the command if needed.
(read_rc_file): Adapt to new defines.
PR 29267
* dwarf.c (display_debug_rnglists): New function, broken out of..
(display_debug_ranges): ... here.
(read_and_display_attr_value): Correct calculation of index
displayed for DW_FORM_loclistx and DW_FORM_rnglistx.
* testsuite/binutils-all/x86-64/pr26808.dump: Update expected
output.
When the compiler doesn't properly arrange for foo's alignment, there's
no point even trying these tests. Report the situation as a single
"unsupported" test.
plt_branch stubs are similar to plt_call stubs in that they branch
via bctr. Align them too.
bfd/
* elf64-ppc.c (ppc_size_one_stub): Align plt_branch stubs as for
plt_call stubs.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Adjust for plt_branch changes.
* testsuite/ld-powerpc/notoc.d: Likewise.
* testsuite/ld-powerpc/notoc.wf: Likewise.
* testsuite/ld-powerpc/notoc3.d: Likewise.
* testsuite/ld-powerpc/pr23937.d: Likewise.
* elf64-ppc.c (plt_stub_pad): Simplify parameters and untangle
from plt_stub_size.
(ppc_size_one_stub): Call plt_stub_size before plt_stub_pad to
provide size. Recalculate size if it might change.
It made sense before I started using separate fields for main type and
sub type to add a difference in main type to the type (thus keeping
sub type unchanged). Not so much now.
* elf64-ppc.c (ppc_merge_stub): Simplify stub type change.
(ppc_size_one_stub): Likewise.
In the existing CSKY architecture, there are at most 32 floating
and 16 vector registers. Float registers's count can be configured
as 16 or 32. In the future, the vector registers's count may be
extended to 32.
The bit width of floating-point register is 64bits, and the bit
width of vector register is 128bit.
Special points: in fr0~fr15 and vr0~vr15, each FRx is the lower
64 bits of the corresponding VRx.
Here, we will split each floating-point and vector register to
32bits wide, add the corresponding pseudo registers, and finally
use them for the dwarf registers.
There are 128 pseudo registers in total, s0~s127, including:
1. s0 and s1 correspond to fr0, s4 and s5 correspond to fr1, and so on.
Every two separated pseudo registers correspond to a float register.
2. s0, s1, s2 and s3 correspond to vr0; s4, s5, s6 and s7 correspond to vr1,
and so on. Every four pseudo registers corresponds to a vector register.
Therefore, in s64~s127, there are general registers that are not actually
used. This part is to prepare for the expansion of vector registers to 32
Therefore, in s64~s127, half of the registers are actually unused. This
part is to prepare for the expansion of the vector register to 32.
To support feature gate like Smstateen && H, this commit adds certain
CSR feature gate handling. It also changes how RV32-only CSRs are
handled for cleanliness.
gas/ChangeLog:
* config/tc-riscv.c (riscv_csr_address): Add CSR feature gate
handling for H. Change handling on RV32.
Some tests link to outdated bug numbers when an XFAIL or a KFAIL happen.
gdb.base/macscp.exp was referencing bug number 555, and the bug 7660
mentions that it used to be 555 on the Gnats system and seems to relate
to the issue at hand.
gdb.base/annota1.exp was referencing bug number 1270, and bug 8375
mentions being number 1270 on Gnats, and mentions annota1 specifically,
so it seemed pretty obvious.
When building gdb with --enable-shared, I run into:
...
ld: build/zlib/libz.a(libz_a-inffast.o): relocation R_X86_64_32S against \
`.rodata' can not be used when making a shared object; recompile with -fPIC
ld: build/zlib/libz.a(libz_a-inflate.o): warning: relocation against \
`inflateResetKeep' in read-only section `.text'
collect2: error: ld returned 1 exit status
make[3]: *** [libbfd.la] Error 1
...
This is a regression since commit a08bdb159b ("[gdb/build] Fix gdbserver
build with -fsanitize=thread").
The problem is that a single case statement in configure is shared to handle
special requirements for both the host libiberty and host zlib, which has the
effect that only one is handled.
Fix this by handling libiberty and zlib each in its own case statement.
Build on x86_64-linux, with and without --enable-shared.
ChangeLog:
2022-06-27 Tom de Vries <tdevries@suse.de>
* configure.ac: Set extra_host_libiberty_configure_flags and
extra_host_zlib_configure_flags in separate case statements.
* configure: Regenerate.
Currently, if GDBserver hits some internal assertion, it exits with
error status, instead of aborting. This makes it harder to debug
GDBserver, as you can't just debug a core file if GDBserver fails an
assertion. I've had to hack the code to make GDBserver abort to debug
something several times before.
I believe the reason it exits instead of aborting, is to prevent
potentially littering the filesystem of smaller embedded targets with
core files. I think I recall Daniel Jacobowitz once saying that many
years ago, but I can't be sure. Anyhow, that seems reasonable to me.
Since we nowadays have a distinction between development and release
modes, I propose to make GDBserver abort on internal error if in
development mode, while keeping the status quo when in release mode.
Thus, after this patch, in development mode, you get:
$ ../gdbserver/gdbserver
../../src/gdbserver/server.cc:3711: A problem internal to GDBserver has been detected.
captured_main: Assertion `0' failed.
Aborted (core dumped)
$
while in release mode, you'll continue to get:
$ ../gdbserver/gdbserver
../../src/gdbserver/server.cc:3711: A problem internal to GDBserver has been detected.
captured_main: Assertion `0' failed.
$ echo $?
1
I do not think that this requires a separate configure switch.
A "--target_board=native-extended-gdbserver" run on Ubuntu 20.04 ends
up with:
=== gdb Summary ===
# of unexpected core files 29
...
for me, of which 8 are GDBserver core dumps, 7 more than without this
patch.
Change-Id: I6861e08ad71f65a0332c91ec95ca001d130b0e9d
Without this changeset, the unwinding doesn't take into account
Non-Secure to Secure stack unwinding enablement status and
doesn't choose the proper SP to do the unwinding.
This patch only unwinds the stack when Non-Secure to Secure
unwinding is enabled, previous SP is set w/r to the current mode
(Handler -> msp_s, Thread -> psp_s) and then the Secure stack is
unwound. Ensure thumb bit is set in PSR when needed. Also, drop
thumb bit from PC if set.
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
Signed-off-by: Yvan ROUX <yvan.roux@foss.st.com>
* dwarf.c (fetch_indexed_string): Do not use length of first table
in string section as the length of every table in the section.
* testsuite/binutils-all/pr26112.r: Update expected output.
With python 3.4, I run into:
...
Traceback (most recent call last):^M
File "<string>", line 1, in <module>^M
File
"outputs/gdb.python/py-send-packet/py-send-packet.py", line 128, in \
run_set_global_var_test^M
res = conn.send_packet(b"X%x,4:\x02\x02\x02\x02" % addr)^M
TypeError: Could not convert Python object: b'X%x,4:\x02\x02\x02\x02'.^M
Error while executing Python code.^M
...
while with python 3.6 this works fine.
The type of addr is <class 'gdb.Value'>, so the first thing to try is whether
changing it into a string works:
...
addr_str = "%x" % addr
res = conn.send_packet(b"X%s,4:\x02\x02\x02\x02" % addr_str)
...
which gets us the more detailed:
...
TypeError: unsupported operand type(s) for %: 'bytes' and 'str'
...
Fix this by avoiding the '%' operator in the byte literal, and use instead:
...
def xpacket_header (addr):
return ("X%x,4:" % addr).encode('ascii')
...
res = conn.send_packet(xpacket_header(addr) + b"\x02\x02\x02\x02")
...
Tested on x86_64-linux, with python 3.4 and 3.6, and a backported version was
tested on the gdb-12-branch in combination with python 2.7.
When running test-case gdb.reverse/i387-env-reverse.exp for x86_64-linux with
target board unix/-m32/-fPIE/-pie, we run into:
...
(gdb) PASS: gdb.reverse/i387-env-reverse.exp: push st0
info register eax^M
eax 0x56550000 1448411136^M
(gdb) FAIL: gdb.reverse/i387-env-reverse.exp: verify eax == 0x8040000
...
The problem is that the tested instruction (fstsw) only sets $ax, not $eax.
Fix this by verifying $ax instead of $eax.
Tested on x86_64-linux with target boards unix/-m32 and unix/-m32/-fPIE/-pie.
When trying to run test-case gdb.reverse/i387-env-reverse.exp for x86_64-linux
with target board unix/-m32, it's skipped.
Fix this by using is_x86_like_target instead of istarget "i?86-*linux*".
This exposes a number of duplicates, fix those by making the test names unique.
Likewise in a couple of other test-cases.
Tested on x86_64-linux with target boards unix/-m32.
After running test-case gdb.fortran/namelist.exp with gfortran 4.8.5, I'm left
with:
...
$ git sti
On branch master
Your branch is up to date with 'origin/master'.
Untracked files:
(use "git add <file>..." to include in what will be committed)
gdb/testsuite/lib/compiler.s
nothing added to commit but untracked files present (use "git add" to track)
...
We're running into PR gcc/60447, which was fixed in gcc 4.9.0.
Workaround this by first copying the source file to the temp dir, such that
the .s file is left there instead:
...
$ ls build/gdb/testsuite/temp/<runtest pid>/
compiler.c compiler.F90 compiler.s
...
Tested on x86_64-linux.
The test-case gdb.fortran/namelist.exp uses a gfortran feature (emitting
DW_TAG_namelist in the debug info) that has been supported since gfortran 4.9,
see PR gcc/37132.
Skip the test for gfortran 4.8 and earlier. Do this using gcc_major_version,
and update it to be able to handle "gcc_major_version {gfortran-*} f90".
Tested on x86_64-linux, with gfortran 4.8.5, 7.5.0, and 12.1.1.
When running test-case gdb.dwarf2/fission-mix.exp with target board dwarf64
and gcc-12 (defaulting to DWARF5), I run into:
...
(gdb) break func2^M
Offset from DW_FORM_GNU_str_index or DW_FORM_strx pointing outside of \
.debug_str.dwo section in CU at offset 0x0 [in module fission-mix]^M
(gdb) FAIL: gdb.dwarf2/fission-mix.exp: break func2
...
The .debug_str_offsets section has version 5, so as per the standard it has
it's own header, with initial length and version:
...
Contents of the .debug_str_offsets.dwo section (loaded from fission-mix2.dwo):
Length: 0x1c
Version: 0x5
Index Offset [String]
0 0 build/gdb/testsuite
1 33 GNU C17
2 8f src/gdb/testsuite/gdb.dwarf2/fission-mix-2.c
...
But when trying to read the string offset at index 0 in the table (which
is 0), we start reading at offset 8, which points in the header, at the last
4 bytes of the initial length (it's 12 bytes because of 64-bit dwarf), as well
at the 2-byte version field and 2 bytes of padding, so we get:
...
(gdb) p /x str_offset
$1 = 0x500000000
...
which indeed is an offset that doesn't fit in the .debug_str section.
The offset 8 is based on reader->cu->header.addr_size:
...
static const char *
read_dwo_str_index (const struct die_reader_specs *reader, ULONGEST str_index)
{
ULONGEST str_offsets_base = reader->cu->header.version >= 5
? reader->cu->header.addr_size : 0;
...
which doesn't in look in agreement with the standard.
Note that this happens to give the right answer for 32-bit dwarf and
addr_size == 8, because then we have header size ==
(initial length (4) + version (2) + padding (2)) == 8.
Conversely, for 32-bit dwarf and addr_size == 4 (target board unix/-m32)
we run into a similar problem. It just happens to not trigger the warning,
instead we get the wrong strings, like "func2" for DW_AT_producer and
"build/gdb/testsuite" for DW_AT_name of the DW_TAG_compile_unit DIE.
Fix this by parsing the .debug_str_offsets header in read_dwo_str_index.
Add a FIXME that we should not parse this for every call.
Tested on x86_64-linux.
[ Copied from gcc commit 153689603fd ("[gdb/build] Fix gdbserver build with
-fsanitize=thread"). ]
When building gdbserver with -fsanitize=thread (added to CFLAGS/CXXFLAGS) we
run into:
...
ld: ../libiberty/libiberty.a(safe-ctype.o): warning: relocation against \
`__tsan_init' in read-only section `.text'
ld: ../libiberty/libiberty.a(safe-ctype.o): relocation R_X86_64_PC32 \
against symbol `__tsan_init' can not be used when making a shared object; \
recompile with -fPIC
ld: final link failed: bad value
collect2: error: ld returned 1 exit status
make[1]: *** [libinproctrace.so] Error 1
...
which looks similar to what is described in commit 78e4948694 ("[gdb/build]
Fix gdbserver build with -fsanitize=address").
The gdbserver component builds a shared library libinproctrace.so, which uses
libiberty and therefore requires the pic variant. The gdbserver Makefile is
setup to use this variant, if available, but it's not there.
Fix this by listing gdbserver in the toplevel configure alongside libcc1, as a
component that needs the libiberty pic variant, setting:
...
extra_host_libiberty_configure_flags=--enable-shared
...
Tested on x86_64-linux.
ChangeLog:
2022-06-27 Tom de Vries <tdevries@suse.de>
* configure.ac: Build libiberty pic variant for gdbserver.
* configure: Regenerate.
PR 29263
* configure.ac: Move HPPA specific code from here...
* configure.tgt: ... to here. Add similar code for MIPS.
Move code for CRIS, MIPS and HPPA to block at start of file.
* configure: Regenerate.
The final "match all" case can take care of a few explicit entries:
Purge those. Also move s12z* into proper position (the table is
otherwise sorted, after all).
Commit 04f096fb9e ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
For clang compiled objects with dwarf-5, location list offset address dump
under DW_AT_location is corrected, where DW_FORM_loclistx is used. While
dumping the location list offset, the address dumped is wrong where it was
refering to .debug_addr instead of .debug_loclists
* dwarf.c (fetch_indexed_value): Add base_address as parameter and
use it to access the section offset.
(read_and_display_attr_value): Handle DW_FORM_loclistx form separately.
Pass loclists_base to fetch_indexed_value().
.branch_lt is really an extension of .plt, as is .iplt. We'd like all
of the PLT sections to be fixed relative to .TOC. after stub sizing,
because changes in offset to PLT entries might mean a change in stub
sizes. When -z relro, the relro layout does this by laying out
sections from the end of the relro segment. So for example, a change
in .eh_frame (which happens after stub sizing) will keep the same GOT
to PLT offset when -z relro. Not so when -z norelro, because then the
usual forward layout of section is done and .got is more aligned than
.branch_lt.
* emulparams/elf64ppc.sh: Set .branch_lt address fixed relative
to .got.
* testsuite/ld-powerpc/elfv2exe.d: Adjust to suit.
A number of targets use assignments like:
. = DATA_SEGMENT_RELRO_END (SIZEOF (.got.plt) >= 12 ? 12 : 0, .);
(from i386) in linker scripts to put the end of the relro segment past
the header in .got.plt. Examination of testcases like those edited by
this patch instead sees the end of the relro segment being placed at
the start of .got.plt. For the i386 pie1 test:
[ 9] .got.plt PROGBITS 00002000 001000 00000c 04 WA 0 0 4
GNU_RELRO 0x000f90 0x00001f90 0x00001f90 0x00070 0x00070 R 0x1
A map file shows:
.dynamic 0x0000000000001f90 0x70
*(.dynamic)
.dynamic 0x0000000000001f90 0x70 tmpdir/pie1.o
0x0000000000001f90 _DYNAMIC
.got 0x0000000000002000 0x0
*(.got)
.got 0x0000000000002000 0x0 tmpdir/pie1.o
*(.igot)
0x0000000000002ff4 . = DATA_SEGMENT_RELRO_END (., (SIZEOF (.got.plt) >= 0xc)?0xc:0x0)
.got.plt 0x0000000000002000 0xc
*(.got.plt)
.got.plt 0x0000000000002000 0xc tmpdir/pie1.o
0x0000000000002000 _GLOBAL_OFFSET_TABLE_
The DATA_SEGMENT_RELRO_END value in the map file is weird too. All of
this is triggered by SIZEOF (.got.plt) being evaluated wrongly as
zero. Fix it by taking into account the action of
lang_reset_memory_regions during relaxation.
* ldexp.c (fold_name <SIZEOF>): Use rawsize if size has been reset.
* ldlang.c (lang_size_sections_1): Don't reset processed_vma here.
* testsuite/ld-i386/pie1.d: Adjust to suit.
* testsuite/ld-x86-64/pr20830a.d: Likewise.
* testsuite/ld-x86-64/pr20830b.d: Likewise.
* testsuite/ld-x86-64/pr21038a.d: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038c.d: Likewise.
Similar to commit 4fb55bf6a9 for aarch64.
Commit b68a20d667 changed ld to produce
R_ARM_GLOB_DAT but that defeated the purpose of protected visibility
as an optimization. Restore the previous behavior (which matches
ld.lld) by defining elf_backend_extern_protected_data to 0.
The dw2-double-set-die-type.exp test case caused an AddressSanitizer
failure in the new DWARF scanner.
The immediate cause was bad DWARF in the test -- in particular, the
the sibling attribute here:
<2><181>: Abbrev Number: 33 (DW_TAG_subprogram)
<182> DW_AT_external : 1
<183> DW_AT_name : address
<18b> DW_AT_type : <0x171>
<18f> DW_AT_declaration : 1
<190> DW_AT_sibling : <0x1a1>
...
<1><1a1>: Abbrev Number: 23 (DW_TAG_pointer_type)
<1a2> DW_AT_byte_size : 4
<1a3> DW_AT_type : <0x1a7>
...points to a "sibling" DIE that is at a different child depth.
Because this test case doesn't really require sibling attributes, this
patch fixes the problem by removing them from the test.
Note that gdb is not generally robust against malformed DWARF.
Detecting and compensating for this problem would probably be
expensive and, IMO, is better left to some (still hypothetical) DWARF
linter.
