This seems a little easier to understand than using a sentinal, and will
hopefully let the compiler optimize the loop better. It also has the effect
that we stop initializing a field of the sentinal that is an enum with zero.
gas/ChangeLog:
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-avr.c (avr_parse_cons_expression): Replace iteration to
sentinal with iteration to array size.
Instead of canonicalizing the argument we can just use a case insensitive
compare.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-avr.c (md_parse_option): Use strcasecmp () to compare
strings.
This commit fixes a few issues in the mechanism for passing information
about ".org" and ".align" directives from the assembler to the linker,
used by the avr target.
In the original commit fdd410ac7a, there
were some mistakes when writing out information about ".align"
directives:
- An align with fill does not write out its information correctly, the
fill data overwrites the alignment data.
- Each alignment directive is recorded at the location where the
previous alignment directive should be recorded, the first alignment
directive is discarded.
In commit 137c83d69f, the data produced by
objdump is not correct:
- It's miss-aligned due to a missing whitespace.
- The fill data for align with fill records is not displayed
correctly.
All of the above issues are addressed in this commit, and the test is
improved to cover these cases.
binutils/ChangeLog:
* od-elf32_avr.c (elf32_avr_dump_avr_prop): Fix printing of align
specific data, fix formatting for align and org data.
gas/ChangeLog:
* config/tc-avr.c (avr_output_property_record): Fix overwrite bug
for align and fill records.
(avr_handle_align): Record fill information for align frags.
(create_record_for_frag): Add next frag assertion, use correct
address for align records.
gas/testsuite/ChangeLog:
* gas/avr/avr-prop-1.s: Use fill in some cases.
* gas/avr/avr-prop-1.d: Update expected results.
When generating relocation (tc_gen_reloc) 32 bit relocation fixup
is changed to new 32 bit PC relative relocation if the fixup has pc-relative
flag set.
bfd/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* elf32-avr.c: Add 32 bit PC relative relocation for AVR target.
gas/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
32 bit PC relative and update offset if the fixup is pc-relative.
* config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
relocs.
gas/testsuite/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* gas/avr/pc-relative-reloc.d: New test for 32 bit pc relative reloc.
* gas/avr/per-function-debugline.s: New test source.
include/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* elf/avr.h: Add new 32 bit PC relative relocation.
ld/testsuite/ChangeLog
2015-07-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* ld-avr/gc-section-debugline.d: New test.
* ld-avr/per-function-debugline.s: Source for new test.
Adds support to the assembler to write out data for tracking the use of
.org and .align directives. This data is collected within the assembler
and written out to a section ".avr.prop" (if there's anything to write
out).
This patch does not add any tests. The next patch in this series will
add a better mechanism for visualising the contents of .avr.prop which
will make writing tests much easier.
This patch also does not make any use of this collected data, that will
also come along in a later patch; the intended consumer is the linker,
during linker relaxation this information will be used to ensure that
the .org and .align directives are honoured.
bfd/ChangeLog:
* elf32-avr.h (AVR_PROPERTY_RECORD_SECTION_NAME): Define.
(AVR_PROPERTY_RECORDS_VERSION): Define.
(AVR_PROPERTY_SECTION_HEADER_SIZE): Define.
(struct avr_property_record): New structure.
gas/ChangeLog:
* config/tc-avr.c: Add elf32-avr.h include.
(struct avr_property_record_link): New structure.
(avr_output_property_section_header): New function.
(avr_record_size): New function.
(avr_output_property_record): New function.
(avr_create_property_section): New function.
(avr_handle_align): New function.
(exclude_section_from_property_tables): New function.
(create_record_for_frag): New function.
(append_records_for_section): New function.
(avr_create_and_fill_property_section): New function.
(avr_post_relax_hook): New function.
* config/tc-avr.h (md_post_relax_hook): Define.
(avr_post_relax_hook): Declare.
(HANDLE_ALIGN): Define.
(avr_handle_align): Declare.
(strut avr_frag_data): New structure.
(TC_FRAG_TYPE): Define.
When fixups are converted to a difference type within md_apply_fix, we
previously left the contents of VALP (the value that was initially
computed within write.c:fixup_segment) unchanged. This is harmless,
except that this value is used within write.c:fixup_segment once we
return from md_apply_fix to perform an overflow check.
In some cases, the value computed in write.c:fixup_segment is so wrong
that an overflow error can be triggered. These errors are incorrect.
This patch avoids the overflow errors by adjusting the value in
write.c:fixup_segment using the VALP pointer in md_apply_fix.
A test for this issue is included.
gas/ChangeLog:
* config/tc-avr.c (md_apply_fix): Update the contents of VALP for
diff fixups.
gas/testsuite/ChangeLog:
* gas/avr/large-debug-line-table.d: New file.
* gas/avr/large-debug-line-table.s: New file.
Have the assembler prepare for linker relaxation by default. This
means that users will be able to make use of linker relaxation without
having to adjust the assembler flags, this can make life easier when
compiling libraries.
Having this on by default in the assembler should make no difference to
the assembler code produced, however, some of the debug information will
be slightly less compressed.
A few tests needed to be updated as a result of this change as they
relied on linker relaxation support being off by default.
I've tightened up the definition of which sections can be relaxed on AVR
as part of this commit, the assembler used to think that all
non-debugging sections could be relaxed, when in reality only code
sections can be relaxed for AVR. The previous definition was not
dangerous, just over cautious. The new tighter definition allows an
extra test (gas/testsuite/gas/all/forward.d) to continue to pass.
gas/ChangeLog:
* config/tc-avr.c (struct avr_opt_s): Change link_relax to
no_link_relax, extend comment.
(enum options): Add new OPTION_NO_LINK_RELAX.
(md_longopts): Add entry for -mno-link-relax.
(md_parse_option): Handle OPTION_NO_LINK_RELAX, and update
OPTION_LINK_RELAX.
(md_begin): Initialise linkrelax from no_link_relax.
(md_show_usage): Include -mno-link-relax option.
(relaxable_section): Only allocatable code sections can be
relaxed.
* config/tc-avr.h (TC_LINKRELAX_FIXUP): Define.
gas/testsuite/ChangeLog:
* gas/all/gas.exp: Test will not pass on AVR due to linker
relaxation support.
* gas/avr/noreloc_withoutrelax.d: Add -mno-link-relax option.
* gas/avr/link-relax-elf-flag-clear.d: Likewise.
ld/testsuite/ChangeLog:
* ld/testsuite/ld-avr/relax-elf-flags-02.d: Add -mno-link-relax
option.
* ld/testsuite/ld-avr/relax-elf-flags-03.d: Likewise.
* ld/testsuite/ld-avr/relax-elf-flags-04.d: Likewise.
* ld/testsuite/ld-avr/relax-elf-flags-05.d: Likewise.
* ld/testsuite/ld-avr/relax-elf-flags-06.d: Likewise.
The AVR target uses a bit in the elf header flags to indicate if the
object was assembled ready for linker relaxation. Previously this flag
was always set, even when the object was not assembled ready for linker
relaxation.
This patch moves setting of the flag into the assembler, and sets it
only when the assembler is preparing the file for linker relaxation.
bfd/ChangeLog:
* elf32-avr.c (bfd_elf_avr_final_write_processing): Don't set
EF_AVR_LINKRELAX_PREPARED unconditionally.
gas/ChangeLog:
* config/tc-avr.c: Add include for elf/avr.h.
(avr_elf_final_processing): New function.
* config/tc-avr.h (elf_tc_final_processing): Define.
(avr_elf_final_processing): Declare
gas/testsuite/ChangeLog:
* gas/avr/link-relax-elf-flag-clear.d: New file.
* gas/avr/link-relax-elf-flag-set.d: New file.
* gas/avr/link-relax-elf-flag.s: New file.
* elf32-avr.c: Handle R_AVR_PORT5 and R_AVR_PORT6.
* reloc.c: Add BFD_RELOC_AVR_PORT5 and BFD_RELOC_AVR_PORT6.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* avr.h: Add R_AVR_PORT5 and R_AVR_PORT6.
* config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
name as [xyz][hl]. Permit using a symbol whoes name begins with
`r' to refer to a register.
Allow arbitrary expressions for the P and p operators.
(md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
BFD_RELOC_AVR_PORT6 relocations.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
(enum options): add OPTION_RMW_ISA for -mrmw option.
(struct option md_longopts): Add mrmw option.
(md_show_usage): add -mrmw option description.
(md_parse_option): Update isa details if -mrmw option specified.
* doc/c-avr.texi: Add doc for new option -mrmw.
* gas/avr/avr.exp: Run new tests.
* gas/avr/rmw.d: Add test for additional ISA support.
* gas/avr/rmw.s: Ditto.
(enum options): add OPTION_RMW_ISA for -mrmw option.
(struct option md_longopts): Add mrmw option.
(md_show_usage): add -mrmw option description.
(md_parse_option): Update isa details if -mrmw option specified.
* doc/c-avr.texi: Add doc for new option -mrmw.
* gas/avr/avr.exp: Run new tests.
* gas/avr/rmw.d: Add test for additional ISA support.
* gas/avr/rmw.s: Ditto.
* config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
Don't skip fixups with fx_subsy non-NULL.
* config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
with fx_subsy non-NULL.
* reloc.c: Add new ENUM for BFD_RELOC_AVR_8_LO,
BFD_RELOC_AVR_8_HI, BFD_RELOC_AVR_8_HHI.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenrate.
* elf32-avr.c (elf_avr_howto_table): Add entries for
R_AVR_8_LO8, R_AVR_8_HI8, R_AVR_8_HHI8.
(avr_reloc_map): Add RELOC mappings for R_AVR_8_LO8, R_AVR_8_HI8,
R_AVR_8_HHI8.
* config/tc-avr.c (exp_mod_pm): Remove variable.
(exp_mod_data_t): New typedef.
(pexp_mod_data, exp_mod_data): New variables.
(avr_parse_cons_expression): Scan through exp_mod_data[] to find
data expression modifiers "pm", "gs", "lo8", hi8", "hhi8", "hh8"
and set pexp_mod_data accordingly to be used in avr_cons_fix_new.
(avr_cons_fix_new): Handle new data expression modifiers shipped
in pexp_mod_data.
(md_apply_fix): Handle BFD_RELOC_AVR_8_LO, BFD_RELOC_AVR_8_HI,
BFD_RELOC_AVR_8_HHI.
* elf/avr.h (RELOC_NUMBERS): Add values for R_AVR_8_LO8,
R_AVR_8_HI8, R_AVR_8_HHI8.
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* archures.c: Add AVR XMEGA architecture information.
* cpu-avr.c (arch_info_struct): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
(elf32_avr_object_p): Likewise.
/gas:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
(AVR_INSN): Change definition to match.
(avr_opcodes): Likewise, change to match.
(mcu_types): Add XMEGA architecture names and new XMEGA device names.
(md_show_usage): Add XMEGA architecture names.
(avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
Add support for SPM Z+ instruction.
* doc/c-avr.texi: Add documentation for XMEGA architectures and
devices.
/include/opcode:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr.h (AVR_ISA_SPMX,AVR_ISA_DES,AVR_ISA_M256,AVR_ISA_XMEGA):
New instruction set flags.
(AVR_INSN): Add new instructions for SPM Z+, DES for XMEGA.
/ld:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add AVR XMEGA architectures.
(eavrxmega?.c): Likewise.
* configure.tgt (targ_extra_emuls): Likewise.
* emulparams/avrxmega1.sh: New file.
* emulparams/avrxmega2.sh: Likewise.
* emulparams/avrxmega3.sh: Likewise.
* emulparams/avrxmega4.sh: Likewise.
* emulparams/avrxmega5.sh: Likewise.
* emulparams/avrxmega6.sh: Likewise.
* emulparams/avrxmega7.sh: Likewise.
* emultempl/avrelf.em (avr_elf_${EMULATION_NAME}_before_allocation):
Add avrxmega6, avrxmega7 to list of architectures for no stubs.
/opcodes:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
post-increment to support LPM Z+ instruction. Add support for 'E'
constraint for DES instruction.
(print_insn_avr): Adjust calls to avr_operand. Rename variable.
* config/tc-mep.c (md_pseudo_table): Remove dwarf2 pseudo
as they are already defined in obj-elf.c
* config/tc-m32c.c (md_pseudo_table): Ditto.
* config/tc-spu.c (md_pseudo_table): Ditto.
* config/tc-avr.c (md_pseudo_table): Ditto.
