This tidies SEC_RELOC handling in bfd, in the process fixing a bug
with objcopy when renaming sections.
bfd/
* reloc.c (_bfd_generic_set_reloc): Set/clear SEC_RELOC depending
on reloc count.
* elf64-sparc.c (elf64_sparc_set_reloc): Likewise.
binutils/
* objcopy.c (copy_relocations_in_section): Remove now unnecessary
clearing of SEC_RELOC.
* testsuite/binutils-all/rename-section-01.d: New test.
* testsuite/binutils-all/objcopy.exp: Run it.
gas/
* write.c (size_seg): Remove unneccesary twiddle of SEC_RELOC.
(write_relocs): Likewise. Always call bfd_set_reloc.
Like commit ffbe89531c this avoids more silliness writing output
that is going to be deleted. bfd_close and bfd_close_all_done differ
in that only the former calls _bfd_write_contents.
* objcopy.c (copy_archive): Don't call bfd_close for elements
that are going to be deleted, call bfd_close_all_done instead.
Do the same for the archive itself.
Given a fuzzed object file in an archive with section size exceeding
file size, objcopy will report an error like "section size (0xfeffffff
bytes) is larger than file size (0x17a bytes)" but will create a copy
of the object laid out for the large section. That means a large
temporary file on disk that is read back and written to the output
archive, which can take a while. The output archive is then deleted
due to the error. Avoid some of this silliness.
* objcopy.c (copy_section): If section contents cannot be read
set output section size to zero.
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
PR 29532
bfd * elf.c (setup_group): Do not return false if there is no group
information available.
bionutils* objcopy.c (setup_section): Leave group sections intact when
creating separate debuginfo files.
2022-08-16 Alan Modra <amodra@gmail.com>
Cunlong Li <shenxiaogll@163.com>
PR 29362
* dwarf.c (free_debug_information): New function, extracted..
(free_debug_memory): ..from here.
(process_debug_info): Use it when before clearing out unit
debug_information. Clear all fields.
* objcopy.c (delete_symbol_htabs): New function.
(main): Call it via xatexit.
(copy_archive): Free "dir".
* objdump.c (free_debug_section): Free reloc_info.
bfd_set_section_alignment currently always returns true. This patch
changes it to return false on silly alignment values, avoiding yet
another way to trigger ubsan errors like coffcode.h:3192:12: runtime
error: shift exponent 299 is too large for 32-bit type 'int'. We'll
catch that one in objcopy.c:setup_sections. However, setup_sections
gives up on other setup operations that are necessary even after an
error of some sort. Change that to keep going, which might change the
error message but that shouldn't matter in the least.
bfd/
* section.c (bfd_set_section_alignment): Return false and
don't set alignment_power for stupidly large alignments.
* bfd-in2.h: Regenerate.
* coffcode.h (coff_compute_section_file_positions): Don't use
an int constant when calculating alignment.
binutils/
* objcopy.c (setup_section): Keep on going after hitting
non-fatal errors.
These two macros print either a 16 digit hex number or an 8 digit
hex number. Unfortunately they depend on both target and host, which
means that the output for 32-bit targets may be either 8 or 16 hex
digits.
Replace them in most cases with code that prints a bfd_vma using
PRIx64. In some cases, deliberately lose the leading zeros.
This change some output, notably in base/offset fields of m68k
disassembly which I think looks better that way, and in error
messages. I've kept leading zeros in symbol dumps (objdump -t)
and in PE header dumps.
bfd/
* bfd-in.h (fprintf_vma, sprintf_vma, printf_vma): Delete.
* bfd-in2.h: Regenerate.
* bfd.c (bfd_sprintf_vma): Don't use sprintf_vma.
(bfd_fprintf_vma): Don't use fprintf_vma.
* coff-rs6000.c (xcoff_reloc_type_tls): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(xcoff_ppc_relocate_section): Likewise.
* cofflink.c (_bfd_coff_write_global_sym): Likewise.
* mmo.c (mmo_write_symbols_and_terminator): Likewise.
* srec.c (srec_write_symbols): Likewise.
* elf32-xtensa.c (print_r_reloc): Similarly for fprintf_vma.
* pei-x86_64.c (pex64_dump_xdata): Likewise.
(pex64_bfd_print_pdata_section): Likewise.
* som.c (som_print_symbol): Likewise.
* ecoff.c (_bfd_ecoff_print_symbol): Use bfd_fprintf_vma.
opcodes/
* dis-buf.c (perror_memory, generic_print_address): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* i386-dis.c (print_operand_value, print_displacement): Likewise.
* m68k-dis.c (print_base, print_indexed): Likewise.
* ns32k-dis.c (print_insn_arg): Likewise.
* ia64-gen.c (_opcode_int64_low, _opcode_int64_high): Delete.
(opcode_fprintf_vma): Delete.
(print_main_table): Use PRIx64 to print opcode.
binutils/
* od-macho.c: Replace all uses of printf_vma with bfd_printf_vma.
* objcopy.c (copy_object): Don't use sprintf_vma. Instead use
PRIx64 to print bfd_vma values.
(copy_main): Likewise.
* readelf.c (CHECK_ENTSIZE_VALUES): Likewise.
(dynamic_section_mips_val): Likewise.
(print_vma): Don't use printf_vma. Instead use PRIx64 to print
bfd_vma values.
(dump_ia64_vms_dynamic_fixups): Likewise.
(process_version_sections): Likewise.
* rddbg.c (stab_context): Likewise.
gas/
* config/tc-i386.c (offset_in_range): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(md_assemble): Likewise.
* config/tc-mips.c (load_register, macro): Likewise.
* messages.c (as_internal_value_out_of_range): Likewise.
* read.c (emit_expr_with_reloc): Likewise.
* config/tc-ia64.c (note_register_values): Don't use fprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(print_dependency): Likewise.
* listing.c (list_symbol_table): Use bfd_sprintf_vma.
* symbols.c (print_symbol_value_1): Use %p to print pointers.
(print_binary): Likewise.
(print_expr_1): Use PRIx64 to print bfd_vma values.
* write.c (print_fixup): Use %p to print pointers. Don't use
fprintf_vma.
* testsuite/gas/all/overflow.l: Update expected output.
* testsuite/gas/m68k/mcf-mov3q.d: Likewise.
* testsuite/gas/m68k/operands.d: Likewise.
* testsuite/gas/s12z/truncated.d: Likewise.
ld/
* deffilep.y (def_file_print): Don't use fprintf_vma. Instead
use PRIx64 to print bfd_vma values.
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* emultempl/pe.em (gld${EMULATION_NAME}_finish): Likewise.
* ldlang.c (lang_map): Use %V to print region origin.
(lang_one_common): Don't use sprintf_vma.
* ldmisc.c (vfinfo): Don't use fprintf_vma or sprintf_vma.
* pe-dll.c (pe_dll_generate_def_file): Likewise.
gdb/
* remote.c (remote_target::trace_set_readonly_regions): Replace
uses of sprintf_vma with bfd_sprintf_vma.
This fixes an inconsequential objcopy memory leak. I'd normally
ignore reports of leaks like this one, that are merely one block or
fewer per section processed, since objcopy soon exits and frees all
memory. However I thought it worth providing support for allocating
memory on a bfd objalloc in objcopy and other utils.
PR 29233
* bucomm.c (bfd_xalloc): New function.
* bucomm.h (bfd_xalloc): Declare.
* objcopy.c (copy_relocations_in_section): Use it to allocate
array of reloc pointers. Rewrite code stripping relocs to do
without extra memory allocation.
Fill the timestamp field suitably for _bfd_XXi_only_swap_filehdr_out().
Instead of re-arranging the present if(), fold this logic with that of
copying the optional header.
From: Peilin Ye <peilin.ye@bytedance.com>
objcopy's --only-keep-debug option has been broken for ELF files since
commit 8c803a2dd7.
1. binutils/objcopy.c:setup_section() marks non-debug sections as
SHT_NOBITS, then calls bfd_copy_private_section_data();
2. If ISEC and OSEC share the same section flags,
bfd/elf.c:_bfd_elf_init_private_section_data() restores OSEC's
section type back to ISEC's section type, effectively undoing
"make_nobits".
* objcopy.c (setup_section): Act on make_nobits after calling
bfd_copy_private_section_data.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
Commit b69c9d41e8 was broken in multiple ways regarding the realloc
of the target string, most notably in that "-little" wasn't actually
appended to the input_target or output_target. This caused asan
errors and "FAIL: Check if efi app format is recognized". I also
noticed that the input_target string wasn't being copied but rather
the output_target when dealing with the input target. Fix that too.
PR 26206
* objcopy.c (convert_efi_target): Rewrite. Allocate modified
target strings here..
(copy_main): ..rather than here. Do handle input_target,
not output_target for input.
This adds support for efi-*-aarch64 by virtue of adding a new PEI target
pei-aarch64-little. This is not a full target and only exists to support EFI
at this time.
This means that this target does not support relocation processing and is mostly
a container format. This format has been added to elf based aarch64 targets
such that efi images can be made natively on Linux.
However this target is not valid for use with gas but only with objcopy.
With these changes the resulting file is recognized as an efi image by
third party tools:
> pecli info hello.efi
Metadata
================================================================================
MD5: 598c32a778b0f0deebe977fef8578c4e
SHA1: 4580121edd5cb4dc40f51b28f171fd15250df84c
SHA256: 3154bd7cf42433d1c957f6bf55a17ad8c57ed41b29df2d485703349fd6ff1d5c
Imphash:
Size: 47561 bytes
Type: PE32+ executable (EFI application) (stripped to external PDB), for MS Windows
Compile Time: 1970-01-01 00:00:00 (UTC - 0x0 )
Entry point: 0x2000 (section .text)
Sections
================================================================================
Name RWX VirtSize VirtAddr RawAddr RawSize Entropy md5
.text R-X 0x5bb0 0x2000 0x400 0x5c00 6.39 551fbc264256a3f387de8a891500ae0d
.reloc R-- 0xc 0x8000 0x6000 0x200 0.02 0c45f6d812d079821c1d54c09ab89e1d
.data RW- 0x1d88 0x9000 0x6200 0x1e00 4.18 5d1137c09f01289dc62bf754f7290db3
.dynamic RW- 0xf0 0xb000 0x8000 0x200 0.34 5c94ed3206f05a277e6f04fbf131f131
.rela R-- 0xe58 0xc000 0x8200 0x1000 1.87 8b5c6bc30f3acb7ca7bf2e6789d68519
.dynsym R-- 0x138 0xd000 0x9200 0x200 0.96 bdcf5101da51aadc663ca8859f88138c
Imports
================================================================================
Any magic number is based on the Microsoft PE specification [1].
[1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
bfd/ChangeLog:
2021-10-21 Tamar Christina <tamar.christina@arm.com>
PR binutils/26206
* .gitignore (pe-aarch64igen.c): New.
* Makefile.am (pei-aarch64.lo, pe-aarch64igen.lo, pei-aarch64.c,
pe-aarch64igen.c): Add support.
* Makefile.in: Likewise.
* bfd.c (bfd_get_sign_extend_vma): Add pei-aarch64-little.
* coff-aarch64.c: New file.
* coffcode.h (coff_set_arch_mach_hook, coff_set_flags,
coff_write_object_contents) Add aarch64 (aarch64_pei_vec) support.
* config.bfd: Likewise.
* configure: Likewise.
* configure.ac: Likewise.
* libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE,
GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE,
GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT,
GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE,
GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT,
GET_PDATA_ENTRY, _bfd_peAArch64_bfd_copy_private_bfd_data_common,
_bfd_peAArch64_bfd_copy_private_section_data,
_bfd_peAArch64_get_symbol_info, _bfd_peAArch64_only_swap_filehdr_out,
_bfd_peAArch64_print_private_bfd_data_common,
_bfd_peAArch64i_final_link_postscript,
_bfd_peAArch64i_only_swap_filehdr_out, _bfd_peAArch64i_swap_aouthdr_in,
_bfd_peAArch64i_swap_aouthdr_out, _bfd_peAArch64i_swap_aux_in,
_bfd_peAArch64i_swap_aux_out, _bfd_peAArch64i_swap_lineno_in,
_bfd_peAArch64i_swap_lineno_out, _bfd_peAArch64i_swap_scnhdr_out,
_bfd_peAArch64i_swap_sym_in, _bfd_peAArch64i_swap_sym_out,
_bfd_peAArch64i_swap_debugdir_in, _bfd_peAArch64i_swap_debugdir_out,
_bfd_peAArch64i_write_codeview_record,
_bfd_peAArch64i_slurp_codeview_record,
_bfd_peAArch64_print_ce_compressed_pdata): New.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out,
pe_print_pdata, _bfd_XX_print_private_bfd_data_common,
_bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript):
Support COFF_WITH_peAArch64,
* pei-aarch64.c: New file.
* peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p):
Support COFF_WITH_peAArch64.
(jtab): Add dummy entry that traps.
* targets.c (aarch64_pei_vec): New.
binutils/ChangeLog:
2021-10-21 Tamar Christina <tamar.christina@arm.com>
PR binutils/26206
* NEWS: Add new support.
* objcopy.c (convert_efi_target): Add efi-*-aarch64 support.
* testsuite/binutils-all/aarch64/pei-aarch64-little.d: New test.
* testsuite/binutils-all/aarch64/pei-aarch64-little.s: New test.
include/ChangeLog:
2021-10-21 Tamar Christina <tamar.christina@arm.com>
PR binutils/26206
* coff/aarch64.h: New file.
* coff/pe.h (IMAGE_FILE_MACHINE_ARM64): New.
"tocopy" in this code was an int, which when the size to be copied was
larger than MAXINT could result in tocopy being negative. A negative
value of course is less than BUFSIZE, but when converted to
bfd_size_type is extremely large.
PR 995
* objcopy.c (copy_unknown_object): Correct calculation of "tocopy".
Use better variable types.
bfd * linker.c (_bfd_generic_link_add_one_symbol): Test for a NULL
name before checking to see if the symbol is __gnu_lto_slim.
* archive.c (_bfd_compute_and_write_armap): Likewise.
binutils
* nm.c (filter_symbols): Test for a NULL name before checking to
see if the symbol is __gnu_lto_slim.
* objcopy.c (filter_symbols): Likewise.
After commit 985e026451 copy_archive function began to pass invalid
values to the utimensat(2) function when it tries to preserve
timestamps in ar archives. This happens because the bfd_stat_arch_elt
implementation for ar archives fills only the st_mtim.tv_sec part of
the st_mtim timespec structure, but leaves the st_mtim.tv_nsec part
and the whole st_atim timespec untouched leaving them uninitialized
PR 28391
* ar.c (extract_file): Clear buf for preserve_dates.
* objcopy.c (copy_archive): Likewise.
A quick check says this is the only place in all of bfd, opcodes,
binutils, gas, ld, gprof that duplicates the new libiberty
htab_eq_string.
* objcopy.c (eq_string): Delete.
(create_symbol_htab): Use htab_eq_string.
More fallout from the PR27456 fixes.
PR 27456
* rename.c (smart_rename): When TO and FROM are equal, just set
file timestamp.
* objcopy.c (strip_main, copy_main): Always call smart_rename.
PR 27478
* objdump.c (process_links): New variable.
(usage): Add --process-links.
(long_options): Likewise.
(dump_bfd): Stop processing once the bfd has been loaded unless
this is the main file or process_links has been enabled.
(main): Handle the process-links option.
* readelf.c (process_links): New variable.
(struct filedata): Add is_separate field.
(options): Add --process-links.
(usage): Likewise.
(parse_args): Likewise.
(process_file_header): Include the filename when dumping
information for separate debuginfo files.
(process_program_headers): Likewise.
(process_section_headers): Likewise.
(process_section_groups): Likewise.
(process_relocs): Likewise.
(process_dynamic_section): Likewise.
(process_version_sections): Likewise.
(display_lto_symtab): Likewise.
(process_symbol_table): Likewise.
(process_syminfo): Likewise.
(initialise_dumps_by_name): Likewise.
(process_section_contents): Likewise.
(process_notes_at): Likewise.
(process_notes): Likewise.
(open_file): Add is_separate parameter. Use to initialise the
is_separate field in the filedata structure.
(open_deug): Update call to open_file.
(process_object): Add processing of the contents of separate
debuginfo files, gated by the process_links variable.
(process_archive): Update call to open_file.
(process_file): Initialise the is_separate field in the filedata
structure.
* dwarf.c (load_separate_debug_info_file): Only report the
loading of a separate file if debug links are being dumped.
* objcopy.c (keep_section_symbols): New variable.
(enum command_line_switch): Add OPTION_KEEP_SYMBOLS.
(strip_options): Add keep-section-symbols.
(copy_options): Likewise.
(copy_usage): Likewise.
(strip_usage): Likewise.
(copy_object): Keep section symbols if requested by command line
option.
(strip_main): Handle --keep-section-symbols.
(copy_main): Likewise.
* doc/binutils.texi: Document the new options.
* NEWS: Mention the new features.
* testsuite/binutils-all/compress.exp (test_gnu_debuglink):
Update options passed to objdump. Use diff rather than cmp to
compare the dumped data.
* testsuite/binutils-all/objdump.WK2: Update regexp.
* testsuite/binutils-all/objdump.WK3: Update regexp.
* testsuite/binutils-all/objdump.exp: Use --process-links
instead of --dwarf=follow-links.
* testsuite/binutils-all/readelf.exp (readelf_test): Include
readelf's output in the log when the test fails.
Add the -P option to the -wKis test.
* testsuite/binutils-all/readelf.wKis: Update expected output.
This patch makes use of the temp file descriptor in smart_rename
rather than reopening the file. I don't believe there is a security
issue in reopening the file, but this way is one less directory
operation. The patch also attempts to preserve S_ISUID and S_ISGID.
PR 27456
* bucomm.h (smart_rename): Update prototype.
* rename.c (smart_rename): Add fromfd and preserve_dates params.
Pass fromfd and target_stat to simple_copy. Call set_times
when preserve_dates.
(simple_copy): Accept fromfd rather than from filename. Add
target_stat param. Rewind fromfd rather than opening. Open
"to" file without O_CREAT. Try to preserve S_ISUID and S_ISGID.
* ar.c (write_archive): Rename ofd to tmpfd. Dup tmpfd before
closing output temp file, and pass tmpfd to smart_rename.
* arsup.c (temp_fd): Rename from real_fd.
(ar_save): Dup temp_fd and pass to smart_rename.
* objcopy.c (strip_main, copy_main): Likewise, and pass
preserve_dates.
Renaming over existing files needs additional care to restore
permissions and ownership, which may not always succeed.
Additionally, other properties of the file such as extended attributes
may be lost, making the operation flaky.
For predictable results, resort to rename() only if the file does not
exist, otherwise copy the file contents into the existing file. This
ensures that no additional tricks are needed to retain file
properties.
This also allows dropping of the redundant set_times on the tmpfile in
objcopy/strip since now we no longer rename over existing files.
binutils/
* ar.c (write_archive): Remove TARGET_STAT. Adjust call to
SMART_RENAME.
* arsup.c (ar_save): Likewise.
* objcopy (strip_main): Don't copy TMPFD. Don't set times on
temporary file and adjust call to SMART_RENAME.
(copy_main): Likewise.
* rename.c [!S_ISLNK]: Remove definitions.
(try_preserve_permissions): Remove function.
(smart_rename): Remove FD, PRESERVE_DATES arguments. Use
rename system call only if TO does not exist.
* bucomm.h (smart_rename): Adjust declaration.
PR 27270
PR 27284
PR 26945
* ar.c: Don't include libbfd.h.
(write_archive): Replace xmalloc+strcpy with xstrdup. Use
bfd_stat rather than fstat on iostream. Move stat and fd tests
outside of _WIN32 ifdef. Delete skip_stat variable.
* arsup.c (temp_name, real_ofd): New static variables.
(ar_open): Use make_tempname and bfd_fdopenw.
(ar_save): Adjust to suit ar_open changes. Move stat output
of _WIN32 ifdef.
* objcopy.c: Don't include libbfd.h.
(copy_file): Use bfd_stat.
smart_rename is capable of handling symlinks by copying and it also
tries to preserve ownership and permissions of files when they're
overwritten during the rename. This is useful in objcopy where the
file properties need to be preserved.
However because smart_rename does this using file names, it leaves a
race window between renames and permission fixes. This change removes
this race window by using file descriptors from the original BFDs that
were used to manipulate these files wherever possible.
The file that is to be renamed is also passed as a file descriptor so
that we use fchown/fchmod on the file descriptor, thus making sure
that we only modify the file we have opened to write. Further, in
case the file is to be overwritten (as is the case in ar or objcopy),
the permissions that need to be restored are taken from the file
descriptor that was opened for input so that integrity of the file
status is maintained all the way through to the rename.
binutils/
* rename.c
* ar.c
(write_archive) [!defined (_WIN32) || defined (__CYGWIN32__)]:
Initialize TARGET_STAT and OFD to pass to SMART_RENAME.
* arsup.c
(ar_save) [defined (_WIN32) || defined (__CYGWIN32__)]:
Likewise.
* bucomm.h (smart_rename): Add new arguments to declaration.
* objcopy.c
(strip_main)[defined (_WIN32) || defined (__CYGWIN32__)]:
Initialize COPYFD and pass to SMART_RENAME.
(copy_main) [defined (_WIN32) || defined (__CYGWIN32__)]:
Likewise.
* rename.c (try_preserve_permissions): New function.
(smart_rename): Use it and add new arguments.
Get file state from the descriptor opened by copy_file for the input
BFD. This ensures continuity in the view of the input file through
the descriptor. At the moment it is only to preserve timestamps
recorded at the point that we opened the file for input but in the
next patch this state will also be used to preserve ownership and
permissions wherever applicable.
binutils/
* objcopy.c (copy_file): New argument IN_STAT. Return stat of
ibfd through it.
(strip_main): Remove redundant stat calls. adjust copy_file
calls.
(copy_main): Likewise.
The purpose of creating a temporary file securely using mkstemp is
defeated if it is closed in make_tempname and reopened later for use;
it is as good as using mktemp. Get the file descriptor instead and
then use it to create the BFD object.
bfd/
* opncls.c (bfd_fdopenw): New function.
* bfd-in2.h: Regenerate.
binutils/
* bucomm.c (make_tempname): Add argument to return file
descriptor.
* bucomm.h (make_tempname): Likewise.
* ar.c: Include libbfd.h.
(write_archive): Adjust for change in make_tempname. Call
bfd_fdopenw instead of bfd_openw.
* objcopy.c: Include libbfd.h.
(copy_file): New argument OFD. Use bfd_fdopenw instead of
bfd_openw.
(strip_main): Adjust for change in make_tempname and
copy_file.
(copy_main): Likewise.
