This patch renames the "set/show remotebaud" commands into
"set/show serial baud", and moves its implementation into serial.c.
It also moves the "baud_rate" global from top.c to serial.c, where
the new code is being added (the alternative was to add an include
of target.h).
And to facilitate the transition to the new setting name, this
patch also preserves the old commands, and marks them as deprecated
to alert the users of the change.
gdb/ChangeLog:
* cli/cli-cmds.c (show_baud_rate): Moved to serial.c as
serial_baud_show_cmd.
(_initialize_cli_cmds): Delete the code creating the
"set/show remotebaud" commands.
* serial.c (baud_rate): Move here from top.c.
(serial_baud_show_cmd): Move here from cli/cli-cmds.c.
(_initialize_serial): Create "set/show serial baud" commands.
Add "set/show remotebaud" command aliases.
* top.c (baud_rate): Moved to serial.c.
* NEWS: Document the new "set/show serial baud" commands,
replacing "set/show remotebaud".
gdb/doc/ChangeLog:
* gdb.texinfo: Replace "set remotebaud" and "show remotebaud"
by "set serial baud" and "show serial baud" (resp) throughout.
* emultempl/elf32.em (id_note_section_size): Use ATTRIBUTE_UNUSED
rather than a dummy assignment for unused parameter.
* plugin.c (get_input_file, release_input_file): Likewise.
target_read_memory & friends build on top of target_read (thus on top
of the target_xfer machinery), but turn all errors to EIO, an errno
value. I think we'd better convert all these to return a
target_xfer_error too, like target_xfer_partial in a previous patch.
The patch starts by doing that.
(The patch does not add a enum target_xfer_error value for '0'/no
error, and likewise does not change the return type of several of
these functions to enum target_xfer_error, because different functions
return '0' with different semantics.)
I audited the tree for memory_error calls, EIO checks, places where
GDB hardcodes 'errno = EIO', and also for strerror calls. What I
found is that nowadays there's really no need to handle random errno
values, other than the EIOs gdb itself hardcodes. No doubt errno
values would appear in common code back in the day when
target_xfer_memory was the main interface to access memory, but
nowadays, any errno value that deprecated interface could return is
just absorved by default_xfer_partial:
else if (xfered == 0 && errno == 0)
/* "deprecated_xfer_memory" uses 0, cross checked against
ERRNO as one indication of an error. */
return 0;
else
return -1;
There are two places in the code that check for EIO and print "out of
bounds", and defer to strerror for other errors. That's
c-lang.c:c_get_string, and valprint.c.:val_print_string. AFAICT, the
strerror branch can never be reached nowadays, as the only error
possible to get at those points is EIO, given that it's GDB itself
that set that errno value (in target_read_memory, etc.).
breakpoint.c:insert_bp_location always prints the error val as if an
errno, returned by target_insert_breakpoint, with strerr. Now the
error here is either always EIO for mem-break.c targets (again
hardcoded by the target_read_memory/target_write_memory functions), so
this always prints "Input/output error" or similar (depending on
host), or, for remote targets (and probably others), this gem:
Error accessing memory address 0x80200400: Unknown error -1.
This patch makes these 3 places print the exact same error
memory_error prints. This changes output, but I think this is better,
for making memory error output consistent with other commands, and, it
means we have a central place to tweak for memory errors.
E.g., this changes:
Cannot insert breakpoint 1.
Error accessing memory address 0x5fc660: Input/output error.
to:
Cannot insert breakpoint 1.
Cannot access memory at address 0x5fc660
Which I find pretty much acceptable.
Surprisingly, only py-prettyprint.exp had a regression, for needing an
adjustment. I also grepped the testsuite for the old errors, and
found no other hits.
Now that errno values aren't used anywhere in any of these memory
access related routines, I made memory_error itself take a
target_xfer_error instead of an errno. The new
target_xfer_memory_error function added recently is no longer
necessary, and is thus removed.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-10-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Use memory_error_message to
build the memory error string.
* c-lang.c: Include "gdbcore.h".
(c_get_string): Use memory_error to throw error.
(target_xfer_memory_error): Delete.
(memory_error_message): New, factored out from
target_xfer_memory_error.
(memory_error): Change parameter type to target_xfer_error.
Rewrite.
(read_memory): Use memory_error instead of
target_xfer_memory_error.
* gdbcore.h: Include "target.h".
(memory_error): Change parameter type to target_xfer_error.
(memory_error_message): Declare function.
* target.c (target_read_memory, target_read_stack)
(target_write_memory, target_write_raw_memory): Return
TARGET_XFER_E_IO on error. Adjust comments.
(get_target_memory): Pass TARGET_XFER_E_IO to memory_error,
instead of EIO.
* target.h (target_read, target_insert_breakpoint)
(target_remove_breakpoint): Adjust comments.
* valprint.c (partial_memory_read): Rename parameter, and adjust
comment.
(val_print_string): Use memory_error_message to build the memory
error string.
gdb/testsuite/
2013-10-09 Pedro Alves <palves@redhat.com>
* gdb.python/py-prettyprint.exp (run_lang_tests): Adjust expected
output.
gdb/
2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
* common/filestuff.c (gdb_fopen_cloexec): Remove initialization of
result variable. Rename variable fopen_e_ever_failed to
fopen_e_ever_failed_einval. Retry fopen only for errno EINVAL.
This removes another yet instance of a deprecated_xfer_memory user.
Tested by building a --enable-targets=all gdb, on x86-64 Fedora 17.
gdb/
2013-10-09 Pedro Alves <palves@redhat.com>
* monitor.c (monitor_write_memory, monitor_write_memory_bytes)
(monitor_write_memory_longlongs, monitor_write_memory_block):
Constify 'myaddr' parameter.
(monitor_xfer_memory): Adjust interface as monitor_xfer_partial
helper.
(monitor_xfer_partial): New function.
(init_base_monitor_ops): Don't install a deprecated_xfer_memory
hook. Install a to_xfer_partial hook.
catch-syscall.exp has a series of duplicated output in gdb.sum. This
patch makes sure all test names are unique, using with_test_prefix.
Tested on x86_64 Fedora 17.
gdb/testsuite/
2013-10-09 Pedro Alves <palves@redhat.com>
* gdb.base/catch-syscall.exp (test_catch_syscall_without_args)
(test_catch_syscall_with_args, test_catch_syscall_with_many_args)
(test_catch_syscall_with_wrong_args)
(test_catch_syscall_restarting_inferior)
(test_catch_syscall_fail_nodatadir)
(test_catch_syscall_without_args_noxml)
(test_catch_syscall_with_args_noxml)
(test_catch_syscall_with_wrong_args_noxml): Use with_test_prefix.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Change type of
buildid_len to bfd_size_type.
gdb
* dwarf2read.c (dwarf2_get_dwz_file): Update for type change in
bfd_get_alt_debug_link_info.
gdb/
2013-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
New flag OBJF_NOT_FILENAME.
* auto-load.c (auto_load_objfile_script): Check also OBJF_NOT_FILENAME.
* jit.c (jit_object_close_impl): Use OBJF_NOT_FILENAME for
allocate_objfile.
(jit_bfd_try_read_symtab): Use OBJF_NOT_FILENAME for
symbol_file_add_from_bfd.
* jv-lang.c (get_dynamics_objfile): Use OBJF_NOT_FILENAME for
allocate_objfile.
* objfiles.c (allocate_objfile): Assert OBJF_NOT_FILENAME if NAME is
NULL.
* objfiles.h (OBJF_NOT_FILENAME): New.
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
2013-10-08 Jan Beulich <jbeulich@suse.com>
* i386-opc.tbl (invlpg): Use Anysize instead of Unspecified.
(clflush): Use Anysize instead of Byte|Unspecified.
(prefetch*): Likewise.
* i386-tbl.h: Re-generate.
Upon trying to print the value of a variant record, a user noticed
the following problem:
(gdb) print rt
warning: Unknown upper bound, using 1.
warning: Unknown upper bound, using 1.
$1 = (a => ((a1 => (4), a2 => (4)), (a1 => (8), a2 => (8))))
The expected output is:
(gdb) print rt
$1 = (a => ((a1 => (4, 4), a2 => (8, 8)), (a1 => (4, 4),
a2 => (8, 8))))
The problems comes from the fact that components "a1" and "a2" are
defined as arrays whose upper bound is dynamic. To determine the value
of that upper bound, GDB relies on the GNAT encoding and searches
for the parallel ___U variable. Unfortunately, the search fails
while doing a binary search inside the partial symtab of the unit
where the array and its bound (and therefore the parallel ___U variable)
are defined.
It fails because partial symbols are sorted using strcmp_iw_ordered,
while Ada symbol lookups are performed using a different comparison
function (ada-lang.c:compare_names). The two functions are supposed
to be compatible, but a change performed in April 2011 modified
strcmp_iw_ordered, introducing case-sensitivity issues. As a result,
the two functions would now disagree when passed the following
two arguments:
string1="common__inner_arr___SIZE_A_UNIT"
string2="common__inner_arr__T4s___U"
The difference starts at "_SIZE_A_UNIT" vs "T4s___U". So, it's mostly
a matter of comparing '_' with 'T'.
On the one hand, strcmp_iw_ordered would return -1, while compare_names
returned 11. The change that made all the difference is that
strcmp_iw_ordered now performs a case-insensitive comparison,
and only resorts to case-sentitive comparison if the first comparison
finds an equality. This changes everything, because while 'T' (84)
and 't' (116) are on opposite sides of '_' (95).
This patch aims at restoring the compatibility between the two
functions, by adding case-sensitivity handling in the Ada comparison
function.
gdb/ChangeLog:
* ada-lang.c (compare_names_with_case): Renamed from
compare_names, adding a new parameter "casing" and its handling.
New function documentation.
(compare_names): New function, implemented using
compare_names_with_case.
for "<foo>a". Issue error messages for unrecognised or corrrupt
size extensions.
* gas/msp430/bad.s: New test: Checks erroneous size extensions.
* gas/msp430/bad.d: New test command file.
* gas/msp430/bad.l: New file: Expected error messages.
* gas/msp430/msp430.exp: Run the new test.
* gas/msp430/msp430x.s: Add "<foo>.a" aliases of "<foo>a"
instructions.
* gas/msp430/msp430x.d: Update expected disassembly.
This moves the demangled_names_hash from the objfile into the per-BFD
object. This is part of the objfile splitting project.
The demangled names hash is independent of the program space. And, it
is needed by the symbol tables. Both of these things indicate that it
must be pushed into the per-BFD object, which this patch does.
Built and regtested on x86-64 Fedora 18.
* objfiles.c (free_objfile_per_bfd_storage): Delete the
demangled_names_hash.
(free_objfile): Don't delete the demangled_names_hash.
* objfiles.h (struct objfile_per_bfd_storage)
<demangled_names_hash>: New field.
(struct objfile) <demangled_names_hash>: Move to
objfile_per_bfd_storage.
* symfile.c (reread_symbols): Don't delete the
demangled_names_hash.
* symtab.c (create_demangled_names_hash): Update.
(symbol_set_names): Update.
Right now we always share per-BFD data across objfiles, if there is a
BFD. This works fine. However, we're going to start sharing more
data, and sometimes this data will come directly from sections of the
BFD. If such a section has SEC_RELOC set, then the data coming from
that section will not be truly sharable -- the section will be
program-space-dependent, and re-read by gdb for each objfile.
This patch disallows per-BFD sharing in this case. This is a bit
"heavy" in that we could in theory examine each bit of shared data for
suitability. However, that is more complicated, and SEC_RELOC is rare
enough that I think we needn't bother.
Note that the "no sharing" case is equivalent to "gdb works as it
historically did". That is, the sharing is a new(-ish) optimization.
Built and regtested on x86-64 Fedora 18.
* gdb_bfd.c (struct gdb_bfd_data) <relocation_computed,
needs_relocations>: New fields.
(gdb_bfd_requires_relocations): New function.
* gdb_bfd.h (gdb_bfd_requires_relocations): Declare.
* objfiles.c (get_objfile_bfd_data): Disallow sharing if
the BFD needs relocations applied.
We recently made GDB auto-delete thread-specific breakpoints when the
corresponding thread is removed from the thread list, but we hadn't
mentioned it in the manual.
gdb/
2013-10-07 Pedro Alves <palves@redhat.com>
PR breakpoints/11568
* gdb.texinfo (Thread-Specific Breakpoints): Mention what happens
when the thread is removed from the thread list.
It seems "gone" may confuse people, while that was exactly what it was
trying to avoid. Switch to saying "no longer in the thread list",
which is really the predicate GDB uses.
gdb/
2013-10-07 Pedro Alves <palves@redhat.com>
PR breakpoints/11568
* breakpoint.c (remove_threaded_breakpoints): Say "no longer in
the thread list" instead of "gone".
will hold the signal number when the inferior terminates due to the
uncaught signal.
I've made modifications on infrun.c:handle_inferior_event such that
$_exitcode gets cleared when the inferior signalled, and vice-versa.
This assumption was made because the variables are mutually
exclusive, i.e., when the inferior terminates because of an uncaught
signal it is not possible for it to return. I have also made modifications
such that when a corefile is loaded, $_exitsignal gets set to the uncaught
signal that "killed" the inferior, and $_exitcode is cleared.
The patch also adds a NEWS entry, documentation bits, and a testcase. The
documentation entry explains how to use $_exitsignal and $_exitcode in a
GDB script, by making use of the new $_isvoid convenience function.
gdb/
2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS: Mention new convenience variable $_exitsignal.
* corelow.c (core_open): Reset exit convenience variables. Set
$_exitsignal to the uncaught signal which generated the corefile.
* infrun.c (handle_inferior_event): Reset exit convenience
variables. Set $_exitsignal for TARGET_WAITKIND_SIGNALLED.
(clear_exit_convenience_vars): New function.
* inferior.h (clear_exit_convenience_vars): New prototype.
gdb/testsuite/
2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/corefile.exp: Test whether $_exitsignal is set and
$_exitcode is void when opening a corefile.
* gdb.base/exitsignal.exp: New file.
* gdb.base/segv.c: Likewise.
* gdb.base/normal.c: Likewise.
gdb/doc/
2013-10-06 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Convenience Variables): Document $_exitsignal.
Update entry for $_exitcode.
