It seems to be not uncommon for people to use AND or OR in this form for
just setting the status flags. TEST, which doesn't write to any
register other than EFLAGS, ought to be preferred. Make the change only
for -O2 and above though, at least for now.
When they're in the 0F opcode space, swapping their source operands may
allow switching from 3-byte to 2-byte VEX prefix encoding. Note that NaN
behavior precludes us doing so for many packed and scalar floating point
insns; such an optimization would need to be done by the compiler
instead in this case, when it knows that NaN-s have undefined behavior
anyway.
While for explicitly specified AVX/AVX2 insns the optimization (for now
at least) gets done only for -O2 and -Os, it is utilized by default in
SSE2AVX mode, as there we're re-writing the programmer's specified insns
anyway.
Rather than introducing a new attribute flag, the change re-uses one
which so far was meaningful only for EVEX-encoded insns.
As long as there's no write mask as well as no broadcast, and as long
as the scaled Disp8 wouldn't result in a shorter EVEX encoding, encode
VPAND{D,Q}, VPANDN{D,Q}, VPOR{D,Q}, and VPXOR{D,Q} acting on only the
lower 16 XMM/YMM registers using their VEX equivalents with -O1.
Also take the opportunity and avoid looping twice over all operands
when dealing with memory-with-displacement ones.
In ELF objects the specified symbol is marked with STO_AARCH64_VARIANT_PCS.
gas/ChangeLog:
* config/tc-aarch64.c (s_variant_pcs): New function.
* doc/c-aarch64.texi: Document .variant_pcs.
* testsuite/gas/aarch64/symbol-variant_pcs-1.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-1.s: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.s: New test.
This option (also implied by --traditional) causes '$' to introduce
literal hexadecimal constants, rather than the modern convention '0x'.
gas/
* config/tc-s12z.c (s12z_strtol): New function. (md_show_usage): Update.
(md_parse_option): new case OPTION_DOLLAR_HEX. (s12z_init_after_args):
(<global>): Use s12z_strtol instead of strtol.
* doc/c-s12z.texi (S12Z Options): Document new option -mdollar-hex.
* testsuite/gas/s12z/dollar-hex.d: New file.
* testsuite/gas/s12z/dollar-hex.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
GNU policy is not to include trademark acknowlegements in
documentation [1]
[1] https://www.gnu.org/prep/standards/html_node/Trademarks.html
Committing as obvious.
gas/
* doc/c-arm.texi (ARM Options): Remove "(r)" and "(tm)"
* doc/c-bfin.texi (Blackfin Syntax): Remove "(r)"
bfd/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch.
binutils/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
(arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
elfcpp/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm.h (Tag_MVE_arch): Define new enum value.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (mve_ext, mve_fp_ext): New features.
(armv8_1m_main_ext_table): Add new extensions.
(aeabi_set_public_attributes): Translate new features to new build attributes.
(arm_convert_symbolic_attribute): Add Tag_MVE_arch.
* doc/c-arm.texi: Document new extensions and new build attribute.
include/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf/arm.h (Tag_MVE_arch): Define new enum value.
* opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
Add a new machine dependent option to set a prefix for register names.
gas/
* config/tc-s12z.c (register_prefix): New variable. (md_show_usage,
md_parse_option): parse the new option.
(lex_reg_name): Scan the prefix if one is set.
* doc/c-s12z.texi (S12Z-Opts): Document the new option.
* testsuite/gas/s12z/reg-prefix.d: New file.
* testsuite/gas/s12z/reg-prefix.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
Include all feature flag macros.
The "sve2" extension that enables the core sve2 instructions.
This also enables the sve extension, since sve is a requirement of sve2.
Extra optional sve2 features are the bitperm, sm4, aes, and sha3 extensions.
These are all given extra feature flags, "bitperm", "sve2-sm4",
"sve2-aes", and "sve2-sha3" respectively.
The sm4, aes, and sha3 extensions are explicitly marked as sve2
extensions to distinguish them from the corresponding NEON extensions.
Rather than continue extending the current feature flag numbers, I used
some bits that have been skipped.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c: Add command line architecture feature flags
"sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm".
* doc/c-aarch64.texi: Document new architecture feature flags.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SVE2
AARCH64_FEATURE_SVE2_AES, AARCH64_FEATURE_SVE2_BITPERM,
AARCH64_FEATURE_SVE2_SM4, AARCH64_FEATURE_SVE2_SHA3): New
feature macros.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h
(aarch64_feature_sve2, aarch64_feature_sve2aes,
aarch64_feature_sve2sha3, aarch64_feature_sve2sm4,
aarch64_feature_sve2bitperm): New feature sets.
(SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros
for feature set addresses.
(SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN,
SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros.
This patch enables the new Transactional Memory Extension added recently
as part of Arm's new architecture technologies.
We introduce a new optional extension "tme" to enable this. The following
instructions are part of the extension:
* tstart <Xt>
* ttest <Xt>
* tcommit
* tcancel #<imm>
The ISA for the above can be found here:
https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order
*** gas/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_features): Add "tme".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/tme-invalid.d: New test.
* testsuite/gas/aarch64/tme-invalid.l: New test.
* testsuite/gas/aarch64/tme-invalid.s: New test.
* testsuite/gas/aarch64/tme.d: New test.
* testsuite/gas/aarch64/tme.s: New test.
*** include/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_TME): New.
(enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16.
*** opcodes/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_IMM_NIL): New.
(TME): New.
(_TME_INSN): New.
(struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
This patch implements the dsp, fp and fp.dp extensions for Armv8.1-M Mainline.
This patch also removes the fp-armv8 check from the half-precision move
instructions 'do_neon_movhf', as checking that the FP16 instructions extension
feature bit is enabled 'ARM_EXT2_FP16_INST' is enough.
gas/ChangeLog:
2019-04-15 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_movhf): Remove fp-armv8 check.
(armv8_1m_main_ext_table): New extension table.
(arm_archs): Use the new extension table.
* doc/c-arm.texi: Add missing arch and document new extensions.
* testsuite/gas/arm/armv8.1-m.main-fp.d: New.
* testsuite/gas/arm/armv8.1-m.main-fp-dp.d: New.
* testsuite/gas/arm/armv8.1-m.main-hp.d: New.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add i6500. Update
default ASEs for i6400.
* doc/c-mips.texi (-march): Document i6500.
* testsuite/gas/mips/elf_mach_i6400.d: New test.
* testsuite/gas/mips/elf_mach_i6500.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
This patch adds a new framework to add architecture sensitive extensions, like
GCC does. This patch also implements all architecture extensions currently
available in GCC.
This framework works as follows. To enable architecture sensitive extensions
for a particular architecture, that architecture must contain an ARM_ARCH_OPT2
entry in the 'arm_archs' table. All fields here are the same as previous, with
the addition of a new extra field at the end to <name> it's extension table.
This <name>, corresponds to a <name>_ext_table of type 'struct arm_ext_table'.
This struct can be filled with three types of entries:
ARM_ADD (string <ext>, arm_feature_set <enable_bits>), which means +<ext> will
enable <enable_bits>
ARM_REMOVE (string <ext>, arm_feature_set <disable_bits>), which means
+no<ext> will disable <disable_bits>
ARM_EXT (string <ext>, arm_feature_set <enable_bits>, arm_feature_set
<disable_bits>), which means +<ext> will enable <enable_bits> and +no<ext>
will disable <disable_bits> (this is to be used instead of adding an
ARM_ADD and ARM_REMOVE for the same <ext>)
This patch does not disable the use of the old extensions, even if some of them
are duplicated in the new tables. This is a "in-between-step" as we may want to
deprecate the old table of extensions in later patches. For now, GAS will first
look for the +<ext> or +no<ext> in the new table and if no entry is found it
will continue searching in the old table, following old behaviour. If only an
ARM_ADD or an ARM_REMOVE is defined for <ext> and +no<ext> or +<ext> resp. is
used then it also continues to search the old table for it.
A couple of caveats:
- This patch does not enable the use of these architecture extensions with the
'.arch_extension' directive. This is future work that I will tend to later.
- This patch does not enable the use of these architecture extensions with the
-mcpu option. This is future work that I will tend to later.
- This patch does not change the current behaviour when combining an
architecture extension and using -mfpu on the command-line. The current
behaviour of GAS is to stage the union of feature bits enabled by both -march
and -mfpu. GCC behaves differently here, so this is something we may want to
revisit on a later date.
Since all AVX512 processors support AVX, we can encode 256-bit/512-bit
VEX/EVEX vector register clearing instructions with 128-bit VEX vector
register clearing instructions at -O1.
* config/tc-i386.c (optimize_encoding): Encode 256-bit/512-bit
VEX/EVEX vector register clearing instructions with 128-bit VEX
vector register clearing instructions at -O1.
* doc/c-i386.texi: Update -O1 and -O2 documentation.
* testsuite/gas/i386/i386.exp: Run optimize-1a and
x86-64-optimize-2a.
* testsuite/gas/i386/optimize-1a.d: New file.
* testsuite/gas/i386/x86-64-optimize-2a.d: Likewise.
ommit 3ae729d5a4
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Mar 7 04:18:45 2018 -0800
x86: Rewrite NOP generation for fill and alignment
increased MAX_MEM_FOR_RS_ALIGN_CODE to 4095 which resulted in increase
of assembler time and memory usage by 5 times for inputs with many
.p2align directives, which is typical for LTO output. This patch passes
max_bytes to TC_FRAG_INIT so that MAX_MEM_FOR_RS_ALIGN_CODE can be set
as needed and tracked by backend it so that HANDLE_ALIGN can check the
maximum alignment for each rs_align_code frag. Wall time to assemble
the same cc1plus.s:
before:
423.78user 0.89system 7:05.71elapsed 99%CPU
after:
102.35user 0.27system 1:42.89elapsed 99%CPU
PR gas/24165
* frags.c (frag_var_init): Pass max_chars to TC_FRAG_INIT as
max_bytes.
* config/tc-aarch64.h (TC_FRAG_INIT): Add and pass max_bytes to
aarch64_init_frag.
* /config/tc-arm.h (TC_FRAG_INIT): And and pass max_bytes to
arm_init_frag.
* config/tc-avr.h (TC_FRAG_INIT): And and ignore max_bytes.
* config/tc-ia64.h (TC_FRAG_INIT): Likewise.
* config/tc-mmix.h (TC_FRAG_INIT): Likewise.
* config/tc-nds32.h (TC_FRAG_INIT): Likewise.
* config/tc-ns32k.h (TC_FRAG_INIT): Likewise.
* config/tc-rl78.h (TC_FRAG_INIT): Likewise.
* config/tc-rx.h (TC_FRAG_INIT): Likewise.
* config/tc-score.h (TC_FRAG_INIT): Likewise.
* config/tc-tic54x.h (TC_FRAG_INIT): Likewise.
* config/tc-tic6x.h (TC_FRAG_INIT): Likewise.
* config/tc-xtensa.h (TC_FRAG_INIT): Likewise.
* config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Set to
(alignment ? ((1 << alignment) - 1) : 1)
(i386_tc_frag_data): Add max_bytes.
(TC_FRAG_INIT): Add and track max_bytes.
(HANDLE_ALIGN): Replace MAX_MEM_FOR_RS_ALIGN_CODE with
fragP->tc_frag_data.max_bytes.
* doc/internals.texi: Update TC_FRAG_TYPE with max_bytes.
opcodes/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Accept arch13 as cpu string.
* s390-opc.c: Add new instruction formats and instruction opcode
masks.
* s390-opc.txt: Add new arch13 instructions.
include/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH13.
gas/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch13.
* doc/c-s390.texi: Document arch13 march option.
* testsuite/gas/s390/s390.exp: Run the arch13 related tests.
* testsuite/gas/s390/zarch-arch13.d: New test.
* testsuite/gas/s390/zarch-arch13.s: New test.
* testsuite/gas/s390/zarch-z13.d: Expect the renamed mnemonics
also for z13.
This adds support for the Arm Ares CPU for AArch64.
It implements the Armv8.2-A architecture with the optional features
of statistical profiling, dot product and FP16 on by default.
Note: Ares is a codename to enable early adopters and in time
we will add the final product name once it's announced.
* config/tc-aarch64.c (aarch64_cpus): Add ares.
* doc/c-aarch64.texi (-mcpu): Document ares value.
This adds support for the Arm Ares CPU in the arm port.
It implements the Armv8.2-A architecture with the relevant optional
features
of dot product and FP16 on by default.
Note: Ares is a codename to enable early adopters and in time
we will add the final product name once it's announced.
* config/tc-arm.c (arm_cpus): Add ares.
* doc/c-arm.texi (-mcpu): Document ares value.
Armv8.3-A has another key used in pointer authentication called the
B-key (other than the A-key that is already supported). In order for
stack unwinders to work it is necessary to be able to identify frames
that have been signed with the B-key rather than the A-key and it was
felt that keeping this as an augmentation character in the CIE was the
best bet. The DWARF extensions for ARM therefore propose to add a new
augmentation character 'B' to the CIE augmentation string and the
corresponding cfi directive ".cfi_b_key_frame". I've made the relevant
changes to GAS and LD to add support for B-key unwinding, which required
modifying LD to check for 'B' in the augmentation string, adding the
".cfi_b_key_frame" directive to GAS and adding a "pauth_key" field to
GAS's fde_entry and cie_entry structs.
The pointer authentication instructions will behave as NOPs on
architectures that don't support them, and so a check for the
architecture being assembled for is not necessary since there will be no
behavioural difference between augmentation strings with and without the
'B' character on such architectures.
2018-12-05 Sam Tebbs <sam.tebbs@arm.com>
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Add check for 'B'.
gas/
* dw2gencfi.c (struct cie_entry): Add tc_cie_entry_extras invocation.
(alloc_fde_entry): Add tc_fde_entry_init_extra invocation.
(output_cie): Add tc_output_cie_extra invocation.
(select_cie_for_fde): Add tc_cie_fde_equivalent_extra and
tc_cie_entry_init_extra invocation.
(frch_cfi_data, cfa_save_data): Move to dwgencfi.h.
* config/tc-aarch64.c (s_aarch64_cfi_b_key_frame): Declare.
(md_pseudo_table): Add "cfi_b_key_frame".
* config/tc-aarch64.h (tc_fde_entry_extras, tc_cie_entry_extras,
tc_fde_entry_init_extra, tc_output_cie_extra,
tc_cie_fde_equivalent_extra, tc_cie_entry_init_extra): Define.
* dw2gencfi.h (struct fde_entry): Add tc_fde_entry_extras invocation.
(pointer_auth_key): Define.
(frch_cfi_data, cfa_save_data): Move from dwgencfi.c.
* doc/c-aarch64.texi (.cfi_b_key_frame): Add documentation.
* testsuite/gas/aarch64/(pac_ab_key.d, pac_ab_key.s): New file.
`-march=r5900' already enables the R5900 short loop workaround.
However, the R5900 ISA and most other MIPS ISAs are mutually
exclusive since R5900-specific instructions are generated as well.
The `-mfix-r5900' option can be used in combination with e.g.
`-mips2' or `-mips3' to generate generic MIPS binaries that also
work with the R5900 target.
This change has been tested with `make RUNTESTFLAGS=mips.exp
check-gas' for the targets `mipsr5900el-unknown-linux-gnu',
`mipsr5900el-elf' and `mips3-unknown-linux-gnu'.
gas/
* config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit):
New variables.
(options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900
enumeration constants.
(md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options.
(can_swap_branch_p, md_parse_option, mips_after_parse_args):
Handle the new options.
(md_show_usage): Document the `-mfix-r5900' option.
* doc/as.texi: Likewise.
* doc/c-mips.texi: Likewise.
* testsuite/gas/mips/mips.exp: Run R5900 dump tests.
* testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option.
* testsuite/gas/mips/r5900-fix.s: Likewise.
* testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'.
* testsuite/gas/mips/r5900-no-fix.s: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions. Memory Tagging Extension is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds the new command line option and the new feature macros.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "memtag"
as a new option.
* doc/c-aarch64.texi: Document the same.
This file was never supposed to be widely used. The fact that it has
found its way into many gas files led to bugs, typically when code
expecting a symbolS* to point at a struct symbol is presented with a
struct local_symbol. Also, commit 158184ac9e changed these structs in
2012 but didn't catch all places where symbol bsym was being used to
test for a local_symbol.
* Makefile.am (HFILES): Delete struc-symbol.h.
* doc/internals.texi: Delete struc-symbol.h reference and out
of date local symbol description.
* struc-symbol.h: Delete. Move contents to..
* symbols.c: ..here.
(symbol_on_chain, symbol_symbolS): New functions.
* symbols.h (symbol_on_chain, symbol_symbolS): Declare.
* cgen.c: Don't #include struc-symbol.h.
(gas_cgen_parse_operand): Don't test for local_symbol using
bsym, instead call symbol_symbolS. Use symbol_get_bfdsym.
(weak_operand_overflow_check, make_right_shifted_expr): Use
symbol accessors.
* config/obj-coff.c: Don't #include struc-symbol.h.
(GET_FILENAME_STRING): Delete.
* config/obj-elf.c: Don't #include struc-symbol.h.
(elf_file_symbol): Use symbol accessors.
(elf_adjust_symtab): Call symbol_on_chain.
* config/obj-evax.c: Don't #include struc-symbol.h.
* config/tc-nds32.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-alpha.c: Likewise.
(add_to_link_pool, s_alpha_comm): Use symbol accessors.
* config/tc-arc.c: Don't #include struc-symbol.h.
(arc_check_relocs): Use symbol accessors, testing gas symbol
section rather than bfd symbol section.
* config/tc-avr.c: Don't #include struc-symbol.h.
(avr_patch_gccisr_frag): Use symbol accessors.
* config/tc-bfin.c: Don't #include struc-symbol.h.
(bfin_loop_beginend): Use symbol accessors.
* config/tc-csky.c: Don't #include struc-symbol.h.
(v2_work_movih, v2_work_ori): Use symbol accessors. Check for
absolute symbol as well as O_constant.
* config/tc-riscv.c: Don't #include struc-symbol.h.
(riscv_pre_output_hook): Use symbol accessors.
* config/tc-s390.c: Don't #include struc-symbol.h.
(s390_literals): Use symbol accessors.
* config/tc-score.c (s3_build_la_pic, s3_build_lwst_pic): Use
symbol accessors.
(s3_relax_branch_inst16, s3_relax_cmpbranch_inst32): Don't
test symbol bsym.
* config/tc-score7.c: Don't #include struc-symbol.h.
(s7_build_la_pic, s7_build_lwst_pic): Use symbol accessors.
(s7_b32_relax_to_b16): Don't test symbol bsym.
* config/tc-sh.c: Don't #include struc-symbol.h.
(insert_loop_bounds): Use symbol accessors.
(sh_frob_section): Remove bogus symbol canonicalization.
* config/tc-tic54x.c: Don't #include struc-symbol.h.
(tic54x_bss): Use symbol accessors.
* config/tc-tilegx.c: Don't #include struc-symbol.h.
(emit_tilegx_instruction, tilegx_parse_name): Use symbol accessors.
* config/tc-tilepro.c: Don't #include struc-symbol.h.
(emit_tilepro_instruction, tilepro_parse_name): Use accessors.
* config/tc-xtensa.c: Don't #include struc-symbol.h.
(xg_assemble_vliw_tokens): Use symbol accessors.
(xg_order_trampoline_chain): Likewise.
* ehopt.c: Don't #include struc-symbol.h.
(check_eh_frame): Correct local symbol test. Use symbol accessors.
* write.c: Don't #include struc-symbol.h.
(create_note_reloc, maybe_generate_build_notes): Use symbol accessors.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds support for the mitigation for Spectre Variant 4 by
adding the PSTATE bit SSBS which are accessible using MSR and MRS
instructions. Although this is a mandatory addition to the ARMv8.5-A,
it is permitted to be added to any version of the ARMv8 architecture.
This is enabled using the command line option of +ssbs for older
versions.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SSBS): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Add
SSBS in the check for one-bit immediate.
(aarch64_sys_regs): New entry for SSBS.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for SSBS.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "ssbs".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/ssbs-illegal1.d: New test.
* testsuite/gas/aarch64/ssbs-illegal1.l: New test.
* testsuite/gas/aarch64/ssbs-illegal2.d: New test.
* testsuite/gas/aarch64/ssbs-illegal2.l: New test.
* testsuite/gas/aarch64/ssbs.s: New test.
* testsuite/gas/aarch64/ssbs1.d: Test with +ssbs
* testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the following:
MSR Xn, RNDR
MSR Xn, RNDRRS
These are optional instructions in ARMv8.5-A and hence the new
+rng is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_RNG): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
rndr and rndrrs.
(aarch64_sys_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): New "rng" option.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: Test both instructions.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the prediction restriction instructions (that is, cfp,
dvp, cpp). These instructions are retrospectively made optional for
all versions of the architecture from ARMv8.0 to ARMv8.4 and is
mandatory from ARMv8.5. Hence adding a new +predres which can be used
by the older architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default.
(aarch64_opnd): Add AARCH64_OPND_SYSREG_SR.
(aarch64_sys_regs_sr): Declare new table.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
AARCH64_OPND_SYSREG_SR.
* aarch64-opc.c (aarch64_print_operand): Likewise.
(aarch64_sys_regs_sr): Define table.
(aarch64_sys_ins_reg_supported_p): Check for RCTX with
AARCH64_FEATURE_PREDRES.
* aarch64-tbl.h (aarch64_feature_predres): New.
(PREDRES, PREDRES_INSN): New.
(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
(AARCH64_OPERANDS): Add new description for SYSREG_SR.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New.
(parse_operands): Add entry for AARCH64_OPND_SYSREG_SR.
(md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh
with aarch64_sys_regs_sr.
(aarch64_features): Add new "predres" option for older
architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: New.
* testsuite/gas/aarch64/sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.l: New.
* testsuite/gas/aarch64/predres.s: New.
* testsuite/gas/aarch64/predres.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence a new command line option of "+sb" is added for older
architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SB): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_sb): New.
(SB, SB_INSN): New.
(aarch64_opcode_table): Add entry for sb.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "sb" option
for older architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sb.s: New.
* testsuite/gas/aarch64/sb.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a.
* doc/c-aarch64.texi: Add documentation for the same.
*** include/ChnageLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_5): New.
(AARCH64_ARCH_V8_5): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
(ARMV8_5, V8_5_INSN): New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This patch adds the Execution and Data Prediction Restriction
instructions (that is, cfprctx, dvprxtc, cpprctx). These are all
aliases to MCR and are disassembled as such.
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence adding a new +predres for older versions of the
architecture.
*** include/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_PREDRES): New.
(ARM_ARCH_V8_5A): Add ARM_EXT2_PREDRES by default.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_ext_predres): New.
(insns): Add new cfprctx, dvprctx and cpprctx instructions.
(arm_extensions): Add "predres".
* doc/c-arm.texi: Document the above.
* testsuite/gas/arm/predres-bad.d: New test.
* testsuite/gas/arm/predres-bad.l: New test.
* testsuite/gas/arm/predres.s: New test.
* testsuite/gas/arm/predres1.d: New test.
* testsuite/gas/arm/predres2.d: New test.
