The save of r2 in __glink_PLTresolve is the culprit. Remove it,
unless we know we need it for --plt-localentry. --plt-localentry
should not be used with power10 pc-relative code that makes tail
calls.
The patch also removes use of r2 as a scratch reg in the ELFv2
__glink_PLTresolve. Using r2 isn't a problem, this is just reducing
the number of scratch regs.
bfd/
* elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Depend on has_plt_localentry0.
(LD_R0_0R11, ADD_R11_R0_R11): Define.
(ppc64_elf_tls_setup): Disable params->plt_localentry0 when power10
code detected.
(ppc64_elf_size_stubs): Update __glink_PLTresolve eh_frame.
(ppc64_elf_build_stubs): Move r2 save to start of __glink_PLTresolve,
and only emit for has_plt_localentry0. Don't use r2 in the stub.
ld/
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/notoc2.d,
* testsuite/ld-powerpc/tlsdesc.wf,
* testsuite/ld-powerpc/tlsdesc2.d,
* testsuite/ld-powerpc/tlsdesc2.wf,
* testsuite/ld-powerpc/tlsopt5.d,
* testsuite/ld-powerpc/tlsopt5.wf,
* testsuite/ld-powerpc/tlsopt6.d,
* testsuite/ld-powerpc/tlsopt6.wf: Update __glink_PLTresolve.
Not sure why there wasn't a NULL check in the ld/22269 patch
(e01c16a8) at the time, as there was one for the corresponding patch
to elf32-m68k.c (5056ba1d).
Incidentally, I had missed that in 2017, as a prerequisite for the
ld/22269 series, the check_relocs function finally were made "safe"!
(I.e. the number of references and symbol types are final, garbage
collection done, so port-specific accounting can be made sanely.)
Committed.
bfd:
PR ld/26589
* elf32-cris.c (cris_elf_check_relocs): Add missing NULL check
on argument before calling UNDEFWEAK_NO_DYNAMIC_RELOC.
ld:
PR ld/26589
* testsuite/ld-elf/pr26589.d, testsuite/ld-elf/locref3.s: New test.
The symbol string table in the .symtab section is optional and cosmetic.
The contents of the .symtab section have no impact on run-time execution.
The symbol names in the symbol string table help distinguish addresses at
different locations. Add a linker option, -z unique-symbol, to avoid
duplicated local symbol names in the symbol string table.
This feature was well received by the livepatch maintainers. It not only
solves the duplicated local symbol name problem, but also would allow
livepatch to more precisely locate duplicate symbols in general for
patching.
bfd/
PR ld/26391
* elflink.c (elf_final_link_info): Add local_hash_table.
(local_hash_entry): New.
(local_hash_newfunc): Likewise.
(elf_link_output_symstrtab): Append ".COUNT" to duplicated local
symbols.
(bfd_elf_final_link): Initialize and free local_hash_table for
"-z unique-symbol".
include/
PR ld/26391
* bfdlink.h (bfd_link_info): Add unique_symbol.
ld/
PR ld/26391
* NEWS: Mention "-z unique-symbol".
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Handle
"-z unique-symbol" and "-z nounique-symbol".
* ld.texi: Document "-z unique-symbol" and "-z nounique-symbol".
* lexsup.c (elf_static_list_options): Add "-z unique-symbol" and
"-z nounique-symbol".
* testsuite/ld-elf/elf.exp: Add PR ld/26391 tests.
* testsuite/ld-elf/pr26391.nd: New file.
* testsuite/ld-elf/pr26391.out: Likewise.
* testsuite/ld-elf/pr26391a.c: Likewise.
* testsuite/ld-elf/pr26391b.c: Likewise.
* testsuite/ld-elf/pr26391c.c: Likewise.
* testsuite/ld-elf/pr26391d.c: Likewise.
The fix in 7e05773767 introduced a PLT
for conditional jumps when the target symbol is undefined. This is
incorrect because conditional branch relocations are not allowed to
clobber IP0/IP1 and hence, should not result in a dynamic relocation.
Revert that change and in its place, issue an error when the target
symbol is undefined.
bfd/
2020-09-10 Siddhesh Poyarekar <siddesh.poyarekar@arm.com>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Revert
changes in 7e05773767. Set
error for undefined symbol in BFD_RELOC_AARCH64_BRANCH19 and
BFD_RELOC_AARCH64_TSTBR14 relocations.
ld/
2020-09-10 Siddhesh Poyarekar <siddesh.poyarekar@arm.com>
* testsuite/ld-aarch64/emit-relocs-560.d: Expect error instead
of valid output.
Prior to
commit 1e3b96fd6c
Author: Alan Modra <amodra@gmail.com>
Date: Fri Sep 4 13:54:21 2020 +0930
Allow plugin syms to mark as-needed shared libs needed
when removing unused IR symbol references, ld didn't add unnecessary
DT_NEEDED libraries which may lead to undefined symbol reference in a
--as-needed library when the symbol is defined in a prior --as-needed
library and there is no reference in relocatable inputs. This behavior
is desirable since it ensures that both lazy and non-lazy bindings work
the same way. The problem is with --as-needed libraries, which happens
with and without LTO. Now, the linker may add many unnecessary DT_NEEDED
libraries for IR inputs.
PR ld/26590
* testsuite/ld-elf/pr26590.err: New file.
* testsuite/ld-elf/pr26590a.c: Likewise.
* testsuite/ld-elf/pr26590b.c: Likewise.
* testsuite/ld-elf/pr26590c.c: Likewise.
* testsuite/ld-elf/pr26590d.c: Likewise.
* testsuite/ld-elf/shared.exp: Run ld/26590 tests.
Some MIPS targets, for reasons I didn't analyse, use the larger common
symbol in a shared lib rather than a smaller common in an executable.
That doesn't seem unreasonable, so allow that to pass for pr26580-2.
bfin-elf complains about not supporting copy relocs, but it's quite
silly to want a copy reloc for common symbols, so leave the fail
there. mn10300-elf and score-elf both fail the test with "PHDR
segment not covered by LOAD segment". Other tests fail similarly so
one more doesn't hurt. The failure is a consequence of supporting
dynamic objects but setting EMBEDDED in ld scripts.
PR 26580
* testsuite/ld-elf/pr26580-2.sd: Accept undefined symbol.
Extend the test a little to archives, not that we expect this to
fail. Nor has the lto-18 test ever failed without -flto.
* testsuite/ld-plugin/lto-18b.c (select): Remove.
* testsuite/ld-plugin/lto-18c.c (select): Remove.
* testsuite/ld-plugin/lto.exp: Build archives for lto-18 too,
and run static versions of the test.
Demonstrates a reason to use IR symbols when deciding an --as-needed
library should be loaded.
* testsuite/ld-plugin/lto-18a.c,
* testsuite/ld-plugin/lto-18b.c,
* testsuite/ld-plugin/lto-18c.c,
* testsuite/ld-plugin/lto-18d.c,
* testsuite/ld-plugin/lto-18.out: New test.
* testsuite/ld-plugin/lto.exp: Run it.
Link-time relaxations of branches are common for MSP430, given that GCC
can generate pessimal branch instructions, and the
-mcode-region=either/-mdata-region=either options to shuffle sections
can further change the type of branch instruction required.
These relaxations can result in invalid code when .uleb128
directives, used in the .gcc_except_table section, are used to calculate
the distance between two labels. A value for the .uleb128 directive is
calculated at assembly-time, and can't be updated at link-time, even if
relaxation causes the distance between the labels to change.
This patch adds relocations for subtract expressions in .uleb128
directives, to allow the linker to re-calculate the value of these
expressions after relaxation has been performed.
bfd/ChangeLog:
* bfd-in2.h (bfd_reloc_code_real): Add
BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* elf32-msp430.c (msp430_elf_ignore_reloc): New.
(elf_msp430_howto_table): Add R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
(msp430_reloc_map): Add R_MSP430_GNU_{SET,SUB}_ULEB128.
(msp430x_reloc_map): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
(write_uleb128): New.
(msp430_final_link_relocate): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
* libbfd.c (_bfd_write_unsigned_leb128): New.
* libbfd.h (_bfd_write_unsigned_leb128): New prototype.
Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* reloc.c: Document BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
binutils/ChangeLog:
* readelf.c (target_specific_reloc_handling): Handle
R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
gas/ChangeLog:
* config/tc-msp430.c (msp430_insert_uleb128_fixes): New.
(msp430_md_end): Call msp430_insert_uleb128_fixes.
include/ChangeLog:
* elf/msp430.h (elf_msp430_reloc_type): Add
R_MSP430_GNU_{SET,SUB}_ULEB128.
(elf_msp430x_reloc_type): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
ld/ChangeLog:
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
* testsuite/ld-msp430-elf/uleb128.s: New test.
* testsuite/ld-msp430-elf/uleb128_430.d: New test.
* testsuite/ld-msp430-elf/uleb128_430x.d: New test.
Two pieces to this puzzle:
1) Revert HJ's fix for PR13250 so that size and alignment isn't
sticky, instead attack the real underlying problem that
_bfd_generic_link_add_one_symbol does the wrong thing in making a
common section in a shared library bfd.
2) Save and restore common u.c.p fields, which hold the section and
alignment.
A better fix for (2) would be to throw away all of that horrible code
saving and restoring the hash table when loading as-needed library
symbols, and instead do a scan over as-needed library symbols before
adding anything.
bfd/
PR 13250
PR 26580
* elflink.c (_bfd_elf_merge_symbol): Make "override" a bfd**.
Return oldbfd in override when old common should override new
common.
(_bfd_elf_add_default_symbol): Adjust to suit.
(elf_link_add_object_symbols): Likewise. Pass "override" to
_bfd_generic_link_add_one_symbol. Save and restore common u.c.p
field for --as-needed shared libraries. Revert pr13250 changes.
ld/
* testsuite/ld-elf/pr26580-a.s,
* testsuite/ld-elf/pr26580-b.s,
* testsuite/ld-elf/pr26580-1.sd,
* testsuite/ld-elf/pr26580-2.sd: New tests
* testsuite/ld-elf/comm-data.exp: Run new tests.
* testsuite/ld-elf/pr26580-a.c,
* testsuite/ld-elf/pr26580-b.c,
* testsuite/ld-elf/pr26580-3.out,
* testsuite/ld-elf/pr26580-4.out: New tests.
* testsuite/ld-elf/shared.exp: Run new tests.
We must tell LTO about symbols in all shared libraries loaded. That
means we can't load extra shared libraries after LTO recompilation, at
least, not those that affect the set of symbols that LTO cares about,
the IR symbols.
This change will likely result in complaints about --as-needed
libraries being loaded unnecessarily, but being correct is more
important than being optimal. One of the PR15146 tests regresses, and
while that could be hidden by disabling the missing dso message by
making it conditional on h->root.non_ir_ref_regular, that would just
be sweeping a problem under the rug.
bfd/
PR 15146
PR 26314
PR 26530
* elflink.c (elf_link_add_object_symbols): Do set def_regular
and ref_regular for IR symbols. Don't clear dynsym, allowing
IR symbols to load --as-needed shared libraries, but prevent
IR symbols from becoming dynamic.
ld/
* testsuite/ld-plugin/lto.exp: Don't run pr15146 tests.
* testsuite/ld-plugin/pr15146.d: Delete.
* testsuite/ld-plugin/pr15146a.c: Delete.
* testsuite/ld-plugin/pr15146b.c: Delete.
* testsuite/ld-plugin/pr15146c.c: Delete.
* testsuite/ld-plugin/pr15146d.c: Delete.
Same as the privileged spec attributes check - different ISA versions
should be compatible, unless there are some known conflicts. Therefore,
we should allow to link objects with different ISA versions, and update
the output ISA versions once the corresponding input ones are newer.
But it's better to also warn people that the conflicts may happen when
the ISA versions are mis-matched.
bfd/
* elfnn-riscv.c (riscv_version_mismatch): Change the return type
from void to bfd_boolean. Report warnings rather than errors
when the ISA versions are mis-matched. Afterwards, remember to
update the output ISA versions to the newest ones.
(riscv_merge_std_ext): Allow to link objects with different
standard ISA versions. Try to add output ISA versions to
merged_subsets first.
(riscv_merge_multi_letter_ext): Likewise. But for standard additional
ISA and non-standard ISA versions.
ld/
* testsuite/ld-riscv-elf/attr-merge-arch-failed-01.d: Update the
message from error to warning.
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02.d: New testcases.
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02c.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02d.s: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
Consider the updated attr-merge-arch-failed-01.d testcase. Extension
A's version are mis-matched between attr-merge-arch-failed-01a.s and
attr-merge-arch-failed-01b.s. But the old binutils reports that the
mis-matched extension is M rather than A. This commit is used to fix
the wrong mis-matched error message.
Besides, when parsing the arch string in the riscv_parse_subset, it
shouldn't be NULL or empty. However, it might be empty when we failed
to merge the arch string in the riscv_merge_attributes. Since we should
already issue the correct error message in another side, and the message
- ISA string must begin with rv32 or rv64 - is meaninglesss when the arch
string is empty, so do not issue it.
bfd/
* elfnn-riscv.c (riscv_merge_std_ext): Fix to report the correct
error message when the versions of extension are mis-matched.
* elfxx-riscv.c (riscv_parse_subset): Don't issue the error when
the string is empty.
ld/
* testsuite/ld-riscv-elf/attr-merge-arch-failed-01.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-arch-failed-01a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-failed-01b.s: Likewise.
Using an input file objalloc memory for anything that isn't created
when opening the bfd is not a good idea. The problem is that this
memory can disappear if bfd_free_cached_info is called or when bfd
closes files in order to keep the number of open files reasonable.
bfd/
* xcofflink.c (xcoff_get_archive_info): Allocate xcoff_archive_info
on the output bfd objalloc memory.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp (single_sysroot_prefix_test):
Log $scriptname.
__{preinit,init,fini}_array_start symbols must be word aligned in
linker scripts. If the section preceding the __*_array_start symbol
has an odd size, then a NULL byte will be present between the start
symbol and the .*_array section itself, when the section gets
automatically word-aligned.
This results in a branch to an invalid address when the CRT startup
code tries to run through the functions listed in the array sections.
Some MSP430 linker scripts do not align the __*_array start symbols, so
this added warning will catch that problem and help the user avoid
the potential incorrect execution of the program.
ld/ChangeLog:
* emultempl/msp430.em (input_section_exists): New.
(check_array_section_alignment): New.
(gld${EMULATION_NAME}_finish): New.
* scripttempl/elf32msp430.sc: Add ALIGN directives before the
definition of __*_array_start symbols.
* testsuite/ld-msp430-elf/finiarray-warn.ld: New test.
* testsuite/ld-msp430-elf/finiarray-warn.r: New test.
* testsuite/ld-msp430-elf/initarray-nowarn.ld: New test.
* testsuite/ld-msp430-elf/initarray-warn.ld: New test.
* testsuite/ld-msp430-elf/initarray-warn.r: New test.
* testsuite/ld-msp430-elf/initarray.s: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
* testsuite/ld-msp430-elf/preinitarray-warn.ld: New test.
* testsuite/ld-msp430-elf/preinitarray-warn.r: New test.
PR19011
bfd * cofflink.c (_bfd_coff_generic_relocate_section): Provide a value
for undefined symbols which will not generate extra warning
messages about truncated relocs.
ld * testsuite/lib/ld-lib.exp (ld_link_defsyms): For PE based targets
define the __main and ___main symbols in terms of the main symbol.
Fixes new failures due to image base change.
PR 19011
* testsuite/ld-plugin/plugin.exp: Use modified CFLAGS throughout
file. Add --image-base for pecoff.
In fact, we can treate these two relocation as the same one in the
riscv_elf_check_relocs. I have heard that RISC-V lld had made this
improvement, and so had GNU AARCH64, they only need R_AARCH64_CALL26
for calls rather than two seperate relocations.
Beside, the following PLT issue for RISC-V 32-bit glibc seems to be
fixed by applying at least this patch.
<https://sourceware.org/pipermail/libc-alpha/2020-August/117214.html>
I have ran the toolchain regression, and everything seems fine for now.
bfd/
* elfnn-riscv.c (riscv_elf_check_relocs): Treat R_RISCV_CALL
and R_RISCV_CALL_PLT as the same in the riscv_elf_check_relocs.
(riscv_elf_relocate_section): Remove the R_RISCV_CALL for the
unresolved reloc checks.
ld/
testsuite/ld-riscv-elf/lib-nopic-01a.s: Use R_RISCV_JAL rather
than R_RISCV_CALL.
testsuite/ld-riscv-elf/lib-nopic-01b.d: Likewise.
testsuite/ld-riscv-elf/lib-nopic-01b.s: Likewise.
This commit follows on from the earlier commit "libctf, ld, binutils:
add textual error/warning reporting for libctf" and converts every error
in libctf that was reported using ctf_dprintf to use ctf_err_warn
instead, gettextizing them in the process, using N_() where necessary to
avoid doing gettext calls unless an error message is actually generated,
and rephrasing some error messages for ease of translation.
This requires a slight change in the ctf_errwarning_next API: this API
is public but has not been in a release yet, so can still change freely.
The problem is that many errors are emitted at open time (whether
opening of a CTF dict, or opening of a CTF archive): the former of these
throws away its incompletely-initialized ctf_file_t rather than return
it, and the latter has no ctf_file_t at all. So errors and warnings
emitted at open time cannot be stored in the ctf_file_t, and have to go
elsewhere.
We put them in a static local in ctf-subr.c (which is not very
thread-safe: a later commit will improve things here): ctf_err_warn with
a NULL fp adds to this list, and the public interface
ctf_errwarning_next with a NULL fp retrieves from it.
We need a slight exception from the usual iterator rules in this case:
with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error"
which signifies the end of iteration, so we add a new err parameter to
ctf_errwarning_next which is used to report such iteration-related
errors. (If an fp is provided -- i.e., if not reporting open errors --
this is optional, but even if it's optional it's still an API change.
This is actually useful from a usability POV as well, since
ctf_errwarning_next is usually called when there's been an error, so
overwriting the error code with ECTF_NEXT_END is not very helpful!
So, unusually, ctf_errwarning_next now uses the passed fp for its
error code *only* if no errp pointer is passed in, and leaves it
untouched otherwise.)
ld, objdump and readelf are adapted to call ctf_errwarning_next with a
NULL fp to report open errors where appropriate.
The ctf_err_warn API also has to change, gaining a new error-number
parameter which is used to add the error message corresponding to that
error number into the debug stream when LIBCTF_DEBUG is enabled:
changing this API is easy at this point since we are already touching
all existing calls to gettextize them. We need this because the debug
stream should contain the errno's message, but the error reported in the
error/warning stream should *not*, because the caller will probably
report it themselves at failure time regardless, and reporting it in
every error message that leads up to it leads to a ridiculous chattering
on failure, which is likely to end up as ridiculous chattering on stderr
(trimmed a bit):
CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable'
CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable'
CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable'
ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable'
We only need to be told that the parent CTF dictionary is unavailable
*once*, not over and over again!
errmsgs are still emitted on warning generation, because warnings do not
usually lead to a failure propagated up to the caller and reported
there.
Debug-stream messages are not translated. If translation is turned on,
there will be a mixture of English and translated messages in the debug
stream, but rather that than burden the translators with debug-only
output.
binutils/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* objdump.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function.
(dump_ctf): Call it on open errors.
* readelf.c (dump_ctf_archive_member): Move error-
reporting...
(dump_ctf_errs): ... into this separate function. Support
calls with NULL fp. Adjust for new err parameter to
ctf_errwarning_next.
(dump_section_as_ctf): Call it on open errors.
include/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-api.h (ctf_errwarning_next): New err parameter.
ld/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp.
Adjust for new err parameter to ctf_errwarning_next. Only
check for assertion failures when fp is non-NULL.
(ldlang_open_ctf): Call it on open errors.
* testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid
breaking the diags tests.
libctf/ChangeLog
2020-08-27 Nick Alcock <nick.alcock@oracle.com>
* ctf-subr.c (open_errors): New list.
(ctf_err_warn): Calls with NULL fp append to open_errors. Add err
parameter, and use it to decorate the debug stream with errmsgs.
(ctf_err_warn_to_open): Splice errors from a CTF dict into the
open_errors.
(ctf_errwarning_next): Calls with NULL fp report from open_errors.
New err param to report iteration errors (including end-of-iteration)
when fp is NULL.
(ctf_assert_fail_internal): Adjust ctf_err_warn call for new err
parameter: gettextize.
* ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter.
(LCTF_VBYTES): Adjust.
(ctf_err_warn_to_open): New.
(ctf_err_warn): Adjust.
(ctf_bundle): Used in only one place: move...
* ctf-create.c: ... here.
(enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number
down as needed. Don't emit the errmsg. Gettextize.
(membcmp): Likewise.
(ctf_add_type_internal): Likewise.
(ctf_write_mem): Likewise.
(ctf_compress_write): Likewise. Report errors writing the header or
body.
(ctf_write): Likewise.
* ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not
ctf_dprintf, and gettextize, as above.
(ctf_arc_write): Likewise.
(ctf_arc_bufopen): Likewise.
(ctf_arc_open_internal): Likewise.
* ctf-labels.c (ctf_label_iter): Likewise.
* ctf-open-bfd.c (ctf_bfdclose): Likewise.
(ctf_bfdopen): Likewise.
(ctf_bfdopen_ctfsect): Likewise.
(ctf_fdopen): Likewise.
* ctf-string.c (ctf_str_write_strtab): Likewise.
* ctf-types.c (ctf_type_resolve): Likewise.
* ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict.
(get_vbytes_v1): Pass down the ctf dict.
(get_vbytes_v2): Likewise.
(flip_ctf): Likewise.
(flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and
gettextize, as above.
(upgrade_types_v1): Adjust calls.
(init_types): Use ctf_err_warn, not ctf_dprintf, as above.
(ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors
emitted into individual dicts into the open errors if this turns
out to be a failed open in the end.
* ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_dump_funcs): Likewise. Collapse err label into its only case.
(ctf_dump_type): Likewise.
* ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err
argument. Gettextize. Don't emit the errmsg.
(ctf_link_one_type): Likewise.
(ctf_link_lazy_open): Likewise.
(ctf_link_one_input_archive): Likewise.
(ctf_link_deduplicating_count_inputs): Likewise.
(ctf_link_deduplicating_open_inputs): Likewise.
(ctf_link_deduplicating_close_inputs): Likewise.
(ctf_link_deduplicating): Likewise.
(ctf_link): Likewise.
(ctf_link_deduplicating_per_cu): Likewise. Add some missed
ctf_set_errnos to obscure error cases.
* ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new
err argument. Gettextize. Don't emit the errmsg.
(ctf_dedup_populate_mappings): Likewise.
(ctf_dedup_detect_name_ambiguity): Likewise.
(ctf_dedup_init): Likewise.
(ctf_dedup_multiple_input_dicts): Likewise.
(ctf_dedup_conflictify_unshared): Likewise.
(ctf_dedup): Likewise.
(ctf_dedup_rwalk_one_output_mapping): Likewise.
(ctf_dedup_id_to_target): Likewise.
(ctf_dedup_emit_type): Likewise.
(ctf_dedup_emit_struct_members): Likewise.
(ctf_dedup_populate_type_mapping): Likewise.
(ctf_dedup_populate_type_mappings): Likewise.
(ctf_dedup_emit): Likewise.
(ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error
status setting.
(ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide
unknown-type-kind messages (which signify file corruption).
PR 19011
* emultempl/pe.em (DEFAULT_DLL_CHARACTERISTICS): Define.
(pe_dll_characteristics): Initialise to DEFAULT_DLL_CHARACTERISTICS.
(add_options): Add options to disable DLL characteristics.
(list_options): List the new options.
(handle_options): Handle the new options.
* emultempl/pep.em: Similar changes to above.
(NT_EXE_IMAGE_BASE): Default to an address above 4G.
(NT_DLL_IMAGE_BASE, NT_DLL_AUTO_IMAGE_BASE,
(NT_DLL_AUTO_IMAGE_MASK): Likewise.
* ld.texi: Document the new options.
* pe-dll.c (pe_dll_enable_reloc_section): Change to default to
true.
(generate_reloc): Do nothing if there is no reloc section.
(pe_exe_fill_sections): Only assign the reloc section contents if
the section exists.
* testsuite/ld-pe/pe.exp: Add the --disable-reloc-section flag to
the .secrel32 tests.
* testsuite/ld-scripts/provide-8.d: Expect for fail on PE targets.
* NEWS: Mention the change in DLL generation.
-fsanitize= can be used to build binutils with
$ CC="gcc -fsanitize=address,undefined" CXX="g++ -fsanitize=address,undefined" .../configure --disable-werror
Since not all linker tests are compatible with -fsanitize=, pass
$NOSANTIZE_CFLAGS to disable -fsanitize= for such tests.
* testsuite/ld-elf/indirect.exp: Append $NOSANTIZE_CFLAGS to CC.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
ppc64 ld optimises sequences like the following
addis 3,13,wot@tprel@ha
lwz 3,wot@tprel@l(3)
to
nop
lwz 3,wot@tprel(13)
when "wot" is located near enough to the thread pointer.
However, the ABI doesn't require that R_PPC64_TPREL16_HA always be on
an addis rt,13,imm instruction, and while ld checked for that on the
high-part instruction it didn't disable the optimisation on the
low-part instruction. This patch fixes that problem, disabling the
tprel optimisation globally if high-part instructions don't pass
sanity checks. The optimisation is also enabled for ppc32, where
before ld.bfd had the code in the wrong place and ld.gold had it in a
block only enabled for ppc64.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Set has_tls_reloc for
high part tprel16 relocs.
(ppc_elf_tls_optimize): Sanity check high part tprel16 relocs.
Clear do_tls_opt on odd instructions.
(ppc_elf_relocate_section): Move TPREL16_HA/LO optimisation later.
Don't sanity check them here.
* elf64-ppc.c (ppc64_elf_check_relocs): Set has_tls_reloc for
high part tprel16 relocs.
(ppc64_elf_tls_optimize): Sanity check high part tprel16 relocs.
Clear do_tls_opt on odd instructions.
(ppc64_elf_relocate_section): Don't sanity check TPREL16_HA.
ld/
* testsuite/ld-powerpc/tls32.d: Update for TPREL_HA/LO optimisation.
* testsuite/ld-powerpc/tlsexe32.d: Likewise.
* testsuite/ld-powerpc/tlsldopt32.d: Likewise.
* testsuite/ld-powerpc/tlsmark32.d: Likewise.
* testsuite/ld-powerpc/tlsopt4_32.d: Likewise.
* testsuite/ld-powerpc/tprel.s,
* testsuite/ld-powerpc/tprel.d,
* testsuite/ld-powerpc/tprel32.d: New tests.
* testsuite/ld-powerpc/tprelbad.s,
* testsuite/ld-powerpc/tprelbad.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run them.
gold/
* powerpc.cc (Target_powerpc): Add tprel_opt_ and accessors.
(Target_powerpc::Scan::local): Sanity check tprel high relocs.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Control tprel optimisation
with tprel_opt_ and enable for 32-bit.
The symbol string table in the .symtab section is optional and cosmetic.
Keep only one '@' for undefined versioned symbols, which are defined in
shared objects, in the symbol string table. Update "nm -D" to display
only one '@' for undefined versioned symbols.
bfd/
PR ld/26382
* elflink.c (elf_link_output_symstrtab): Keep only one '@' for
versioned symbols, which are defined in shared objects, in
symbol string table.
binutils/
PR ld/26382
* nm.c (print_symname): Display only one '@' for undefined
versioned symbols.
* doc/binutils.texi: Update nm version information.
ld/
PR ld/26382
* testsuite/ld-elf/pr26302.nd: Updated.
* testsuite/ld-elf/pr26302.rd: New file.
* testsuite/ld-elf/shared.exp: Add a test for readelf -sW.
PR 26428
bfd * bfd.c (bfd_update_compression_header): Also set the sh_addralign
field in the ELF header of the compressed sections.
ld * testsuite/ld-elf/zlibbegin.rS: Update expected output.
* testsuite/ld-elf/zlibnormal.rS: Likewise.
The regexpr in these two files are a bit strict in that they don't account for
the slight changes in tags in certain arm targets which cause our address
offsets to change. This changes the tests to allow slight movement in
locations while still strictly checking the rest.
ld/ChangeLog:
2020-08-03 Tamar Christina <tamar.christina@arm.com>
* testsuite/ld-arm/thumb-plt-got.d: Relax regexpr.
* testsuite/ld-arm/thumb-plt.d: Likewise.
The eBPF ELF backend was not properly recording relocation addends
during installation, nor reading and applying them when performing
the final relocation. This lead to various issues with incorrect
relocations.
These issues are fixed with a new howto special function to install
the relocations, and updates to bpf_elf_relocate_section to read and
use the addends as recorded in the input_bfd.
bfd/ChangeLog
2020-08-05 David Faust <david.faust@oracle.com>
* elf64-bpf.c (bpf_elf_generic_reloc): New function.
(bpf_elf_howto_table): Use it here.
(bpf_elf_relocate_section): Use addends recorded in input_bfd for
instruction and data relocations.
ld/ChangeLog
2020-08-05 David Faust <david.faust@oracle.com>
* testsuite/ld-bpf/call-2.s: New file.
* testsuite/ld-bpf/call-2.d: Likewise.
* testsuite/ld-bpf/reloc-data-be.d: Likewise.
* testsuite/ld-bpf/reloc-data-le.d: Likewise.
* testsuite/ld-bpf/reloc-data.s: Likewise.
* testsuite/ld-bpf/reloc-insn-external-be.d: Likewise.
* testsuite/ld-bpf/reloc-insn-external-le.d: Likewise.
* testsuite/ld-bpf/reloc-insn-external.s: Likewise.
* testsuite/ld-bpf/reloc-insn32-be.d: Likewise.
* testsuite/ld-bpf/reloc-insn32-le.d: Likewise.
* testsuite/ld-bpf/reloc-insn32.s: Likewise.
* testsuite/ld-bpf/reloc-insn64-be.d: Likewise.
* testsuite/ld-bpf/reloc-insn64-le.d: Likewise.
* testsuite/ld-bpf/reloc-insn64.s: Likewise.
LTO can be used to build binutils with
$ CC="gcc -flto -ffat-lto-objects -Wl,--as-needed" CXX="g++ -flto -ffat-lto-objects -Wl,--as-needed" .../configure
But not all linker tests are compatible with LTO. Pass -fno-lto to CC
to disable LTO on linker tests by default. -flto is passed explicitly
to CC in linker LTO tests.
* testsuite/ld-elf/indirect.exp: Append -fno-lto to CC.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-plugin/lto.exp (no_lto): New.
Add $no_lto to build pr15146c.so.
* testsuite/lib/ld-lib.exp (at_least_gcc_version): Filter out
-Wl,xxx options.
(check_gcc_plugin_enabled): Likewise.
(run_ld_link_exec_tests): Prepend -fno-lto to $cflags.
(run_cc_link_tests): Likewise.
Make the MIPS/IRIX naming of local section symbols consistent between
files produced by generic ELF code and ELF linker code, complementing
commit 174fd7f955 ("New bfd elf hook: force naming of local section
symbols"), <https://sourceware.org/ml/binutils/2004-02/msg00072.html>.
Local section symbols have no names in the standard ELF gABI, however
the lack of a name causes problems with IRIX's MIPSpro linker. To work
around the issue we give them names, however we do that in generic ELF
code only, based on what the `elf_backend_name_local_section_symbols'
hook returns if present. That makes objects created by GAS or `objdump'
work correctly, however not ones created by `ld -r'. That would not
normally cause issues with IRIX systems using GAS and `objdump' only
with the MIPSpro linker, however if GNU LD was used for whatever reason
in producing objects later fed to IRIX's MIPSpro linker, then things
would break.
Modify ELF linker code accordingly then, using the same hook. Adjust
the `ld-elf/64ksec-r' test accordingly so that it also accepts a section
symbol with a name.
Also modify the hook itself so that only actual ET_REL objects have
names assigned to local section symbols. Other kinds of ELF files are
not ever supposed to be relocated with the MIPSpro linker, so we can
afford producing more standard output.
Add suitable GAS, LD and `objcopy' test cases to the relevant testsuites
to keep these tools consistently verified. This change also fixes:
FAIL: objcopy executable (pr25662)
across MIPS targets using the IRIX compatibility mode.
bfd/
* elflink.c (bfd_elf_final_link): Give local symbols a name if
so requested.
* elfxx-mips.c (_bfd_mips_elf_name_local_section_symbols): Only
return TRUE if making ET_REL output.
binutils/
* testsuite/binutils-all/mips/global-local-symtab-sort-o32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-o32t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n32t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n64.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n64t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-o32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-n32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-n64.d:
New test.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/global-local-symtab-sort-o32.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-o32t.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n32.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n32t.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n64.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n64t.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-elf/sec64k.exp: Also accept a section symbol with
a name.
* testsuite/ld-mips-elf/global-local-symtab-sort-o32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n32t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n64.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-o32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-n32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Correct ELF linker code so as to set the `sh_info' value of the static
symbol table section according to the section symbols vs other symbols
split where required by the selection of the IRIX compatibility mode for
MIPS target. Add a `elf_backend_elfsym_local_is_section' hook for that
purpose, returning TRUE if it is only STB_LOCAL/STT_SECTION symbols that
are to be considered local for the purpose of this split rather than all
STB_LOCAL symbols.
We do it already in generic ELF code, and have done it since 1993, with
the `elf_backend_sym_is_global' hook, affecting GAS and `objcopy', so
these tools produce correct ELF output in the IRIX compatibility mode,
however if such output is fed as input to `ld -r', then the linker's
output is no longer valid for that mode. The relevant changes to
generic ELF code are:
commit 062189c6ea
Author: Ian Lance Taylor <ian@airs.com>
Date: Thu Nov 18 17:12:47 1993 +0000
and:
commit 6e07e54f1b
Author: Ian Lance Taylor <ian@airs.com>
Date: Thu Jan 6 20:01:42 1994 +0000
(split across two GIT commits likely due to repository conversion
peculiarities).
The `elf_backend_sym_is_global' hook however operates on BFD rather than
ELF symbols, making it unsuitable for the ELF linker as the linker does
not convert any symbol tables processed into the BFD format. Converting
the hook to operate on ELF symbols would in principle be possible, but
it would still require a considerable rewrite of `bfd_elf_final_link' to
adapt to the interface.
Therefore, especially given that no new use for the IRIX compatibility
mode is expected, minimize changes made to the ELF linker code and just
add an entirely new hook, and wire it in the o32 and n32 MIPS backends
accordingly; the n64 backend never uses the IRIX compatibility mode.
Since we have no coverage here at all add suitable GAS, LD and `objcopy'
test cases to the relevant testsuites to keep these tools consistently
verified.
bfd/
* elf-bfd.h (elf_backend_data): Add
`elf_backend_elfsym_local_is_section' member.
* elfxx-target.h (elf_backend_elfsym_local_is_section): New
macro.
(elfNN_bed): Add `elf_backend_elfsym_local_is_section' member.
* elflink.c (bfd_elf_final_link): Use it to determine whether
set the `.symtab' section's `sh_info' value to the index of the
first non-local or non-section symbol.
* elf32-mips.c (mips_elf32_elfsym_local_is_section): New
function.
(elf_backend_elfsym_local_is_section): New macro.
* elfn32-mips.c (mips_elf_n32_elfsym_local_is_section): New
function.
(elf_backend_elfsym_local_is_section): New macro.
binutils/
* testsuite/binutils-all/mips/global-local-symtab-o32.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-o32t.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n32.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n32t.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n64.d: New
test.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/global-local-symtab-o32.d: New test.
* testsuite/gas/mips/global-local-symtab-o32t.d: New test.
* testsuite/gas/mips/global-local-symtab-n32.d: New test.
* testsuite/gas/mips/global-local-symtab-n32t.d: New test.
* testsuite/gas/mips/global-local-symtab-n64.d: New test.
* testsuite/gas/mips/global-local-symtab.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/global-local-symtab-o32.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-o32t.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n32.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n32t.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n64.d: New test.
* testsuite/ld-mips-elf/global-local-symtab.ld: New test linker
script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
* ldlang.c (lang_check): Don't complain about relocs or merge
attributes from --just-symbols input.
* testsuite/ld-misc/just-symbols.exp: Just dump .data section.
Don't run test on a number of targets.
This ensures we don't match random data *before* the line we want to
see, ie. that --just-symbols has excluded section contents from
just-symbols-0.o. Oops, missed the ChangeLog entry before too.
* testsuite/ld-misc/just-symbols-1.dd: Revert last change.
* testsuite/ld-misc/just-symbols.exp: Run for x86_64 PE too.
Set LDFLAGS for PE and XCOFF.
* testsuite/ld-misc/just-symbols.ld: Accept XCOFF mapped .data.
