ld/
* emultempl/alphaelf.em (alpha_after_parse): Enable 2 relax passes.
bfd/
* elf64-alpha.c (elf64_alpha_size_got_sections): New may_merge
parameter; honor it and disable got merging when false.
(elf64_alpha_relax_got_load): Do not relax to GPREL relocs during
the first pass of relaxation.
(elf64_alpha_relax_with_lituse): Likewise. Move relaxed relocs to
the end of the LITERAL+LITUSE chain.
(elf64_alpha_relax_section): Only process LITERAL relocs during the
second pass of relaxation.
gdb/windows-nat.c (thread_rec): Don't display a warning when
SuspendThread fails with ERROR_ACCESS_DENIED. If SuspendThread
fails for any reason, set th->suspended to -1, so that we don't
try to resume such a thread. Also, don't return NULL in these
cases, to avoid completely ruin the session due to "PC register is
not available" error.
(do_windows_fetch_inferior_registers): Check errors in
GetThreadContext call.
(windows_continue): Accept an additional argument KILLED; if not
zero, ignore errors in the SetThreadContext call, since the
inferior was killed and is shutting down.
(windows_resume, get_windows_debug_event)
(windows_create_inferior, windows_mourn_inferior)
(windows_kill_inferior): All callers of windows_continue changed
to adjust to its new calling sequence.
We don't call post_create_inferior at the end of ctf_open. It is an
oversight in patch
[PATCH 2/2] Create inferior for ctf target.
https://sourceware.org/ml/gdb-patches/2014-01/msg01056.html
This patch is to call post_create_inferior at the end of ctf_open,
like the end of tfile_open.
gdb:
2014-04-19 Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_open): Call post_create_inferior.
In ctf trace, for each 'R' block, we save it as a "register" event,
as defined below in metadata.
event {
name = "register";
id = 0;
fields := struct {
ascii contents[440];
};
}
Nowadays, we initialize trace_regblock_size by getting the length of
"contents" from a "register" event. However, 'R' block may not exist
in traceframe, as a result, "register" event doesn't exist in trace file
and trace_regblock_size isn't set.
This patch changes to get trace_regblock_size from metadata (or declaration)
which always exists.
gdb:
2014-04-19 Yao Qi <yao@codesourcery.com>
* ctf.c (handle_id): New static variable.
(ctf_open_dir): Get handle_id from bt_context_add_trace return
value. Get the declaration of event "register" and get length
of field "contents".
I find a gdb crash when gdb reads ctf trace. The crash is caused by passing
NULL to strcmp. This patch is to add null pointer check, as what we did
somewhere else in ctf.c.
gdb:
2014-04-19 Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_xfer_partial): Check 'name' is NULL before strcmp.
bfd/
* mach-o.h (bfd_mach_o_dyld_info_command): Add rebase_content,
bind_content, weak_bind_content, lazy_bind_content,
export_content.
(bfd_mach_o_load_command): Add comments, add next field.
(mach_o_data_struct): Replace commands field by first_command
and last_command.
* mach-o.c (bfd_mach_o_append_command): New function.
(bfd_mach_o_bfd_copy_private_symbol_data): Add blank lines.
(bfd_mach_o_bfd_copy_private_section_data): Check flavour,
copy fields.
(bfd_mach_o_bfd_copy_private_header_data): Copy load commands.
(bfd_mach_o_pad4, bfd_mach_o_pad_command): New functions.
(bfd_mach_o_write_thread): Use macro instead of literal.
(bfd_mach_o_write_dylinker, bfd_mach_o_write_dylib)
(bfd_mach_o_write_main, bfd_mach_o_write_dyld_info): New
functions.
(bfd_mach_o_write_symtab_content): New function (extracted
from bfd_mach_o_write_symtab).
(bfd_mach_o_write_symtab): Split.
(bfd_mach_o_count_indirect_symbols): Move
(bfd_mach_o_build_dysymtab): Remove layout code.
(bfd_mach_o_write_contents): Rewritten to build commands in order.
(bfd_mach_o_count_sections_for_seg): Remove.
(bfd_mach_o_build_obj_seg_command): New function (extracted from
bfd_mach_o_build_seg_command).
(bfd_mach_o_build_exec_seg_command): New function.
(bfd_mach_o_build_dysymtab_command): Remove.
(bfd_mach_o_layout_commands): New function.
(bfd_mach_o_init_segment): New function.
(bfd_mach_o_build_commands): Major rework to handle non-object
files.
(bfd_mach_o_alloc_and_read, bfd_mach_o_read_dyld_content): New
function.
(bfd_mach_o_read_dyld_info): Clear content fields.
(bfd_mach_o_read_segment): Adjust call.
(bfd_mach_o_flatten_sections): Adjust as now load commands are
chained.
(bfd_mach_o_scan_start_address, bfd_mach_o_scan)
(bfd_mach_o_mkobject_init, bfd_mach_o_get_base_address)
(bfd_mach_o_lookup_command, bfd_mach_o_core_fetch_environment):
Likewise.
binutils/
* od-macho.c (dump_section_map): Adjust as load commands
are now chained.
(dump_load_command, dump_section_content): Likewise.
This PR is about an assertion failure in GDB that can be triggered by
setting "backtrace limit" to a value that causes GDB to stop unwinding
after an inline frame. In this case, an assertion in
inline_frame_this_id will trigger:
/* We need a valid frame ID, so we need to be based on a valid
frame. (...). */
gdb_assert (frame_id_p (*this_id));
Looking at the function:
static void
inline_frame_this_id (struct frame_info *this_frame,
void **this_cache,
struct frame_id *this_id)
{
struct symbol *func;
/* In order to have a stable frame ID for a given inline function,
we must get the stack / special addresses from the underlying
real frame's this_id method. So we must call get_prev_frame.
Because we are inlined into some function, there must be previous
frames, so this is safe - as long as we're careful not to
create any cycles. */
*this_id = get_frame_id (get_prev_frame (this_frame));
we see we're computing the frame id for the inline frame. If this is
an inline frame, which is a virtual frame constructed based on debug
info, on top of a real stack frame, we should _always_ be able to find
where the frame was inlined into, as that ultimately just means
peeling off the virtual frames on top of the real stack frame. If
there ultimately was no prev (real) stack frame, then we wouldn't have
been able to construct the inline frame either, by design. That's
what the assertion catches.
So we have an inline frame, we should _always_ be able to compute its
ID, even if that means bypassing the user backtrace limits to get at
the real stack frame's info. The problem is that inline_frame_id
calls get_prev_frame, and that takes user backtrace limits into
account. Code that wants to bypass the limits calls get_prev_frame_1
instead.
Note how get_prev_frame_1 already skips all checks for inline frames:
/* If we are unwinding from an inline frame, all of the below tests
were already performed when we unwound from the next non-inline
frame. We must skip them, since we can not get THIS_FRAME's ID
until we have unwound all the way down to the previous non-inline
frame. */
if (get_frame_type (this_frame) == INLINE_FRAME)
return get_prev_frame_if_no_cycle (this_frame);
And note how the related frame_unwind_caller_id function also uses
get_prev_frame_1:
struct frame_id
frame_unwind_caller_id (struct frame_info *next_frame)
{
struct frame_info *this_frame;
/* Use get_prev_frame_1, and not get_prev_frame. The latter will truncate
the frame chain, leading to this function unintentionally
returning a null_frame_id (e.g., when a caller requests the frame
ID of "main()"s caller. */
next_frame = skip_artificial_frames (next_frame);
this_frame = get_prev_frame_1 (next_frame);
if (this_frame)
return get_frame_id (skip_artificial_frames (this_frame));
else
return null_frame_id;
}
get_prev_frame_1 is currently static in frame.c. As a _1 suffix is
not a good name for an extern function, I've renamed it.
Tested on x86-64 Fedora 17.
gdb/
2014-04-18 Pedro alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
PR backtrace/15558
* frame.c (get_prev_frame_1): Rename to ...
(get_prev_frame_always): ... this, and make extern. Adjust.
(skip_artificial_frames): Use get_prev_frame_always.
(frame_unwind_caller_id, frame_pop, get_prev_frame)
(get_frame_unwind_stop_reason): Adjust to rename.
* frame.h (get_prev_frame_always): Declare.
* inline-frame.c: Include frame.h.
(inline_frame_this_id): Use get_prev_frame_always.
gdb/testsuite/
2014-04-18 Tom Tromey <palves@redhat.com>
Pedro alves <tromey@redhat.com>
PR backtrace/15558
* gdb.opt/inline-bt.exp: Test backtracing from an inline function
with a backtrace limit.
* gdb.python/py-frame-inline.exp: Test running to an inline
function with a backtrace limit, and printing the newest frame.
* gdb.python/py-frame-inline.c (main): Call f.
Use bfd_mach_o_get_base_address to extract load address.
gdb/
* solib-darwin.c (darwin_solib_create_inferior_hook): Simplify
code by using bfd_mach_o_get_base_address.
be placed towards the front of local GOT space, while entries addressed
via a 32-bit index are placed towards the rear.
Provided that there are fewer than ~16K local GOT entries addressed via
a 16-bit index in total, this should eliminate any relocation overflows
caused by such GOT entries being allocated beyond the addressable range.
bfd/
* elfxx-mips.c (struct mips_got_info): Delete assigned_gotno
field. Add assigned_low_gotno and assigned_high_gotno fields.
(mips_elf_create_local_got_entry): Update out-of-space condition.
Set index of new GOT entry to assigned_low_gotno if required by
the current relocation, else set it to assigned_high_gotno.
(mips_elf_set_global_gotidx): Replace uses of assigned_gotno
with assigned_low_gotno.
(mips_elf_multi_got): Initialize assigned_low_gotno and
assigned_high_gotno in secondary GOTs. Use assigned_low_gotno
in place of assigned_gotno when handling global GOT entries.
(mips_elf_lay_out_got): Initialize assigned_low_gotno and
assigned_high_gotno.
(_bfd_mips_elf_finish_dynamic_sections): Account for a possible
gap in the middle of local GOT space.
ld/testsuite/
* ld-mips-elf/elf-rel-xgot-n32.d: Update for new GOT layout.
* ld-mips-elf/elf-rel-xgot-n32-embed.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64-embed.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise.
This patch enables use of DWARF unwinders for the SPU target.
In addition to appending the DWARF unwinders, we also need to install
a spu_dwarf_reg_to_regnum that maps the raw stack pointer register to
the cooked version (to avoid mismatches with gdbarch_sp_regnum).
This also causes confusion with the AX collect handling, so we also
install ax_pseudo_register routines to handle the cooked SP.
gdb/
2014-04-17 Ulrich Weigand <uweigand@de.ibm.com>
* spu-tdep.c: Include "dwarf2-frame.h" and "ax.h".
(spu_ax_pseudo_register_collect): New function.
(spu_ax_pseudo_register_push_stack): Likewise.
(spu_dwarf_reg_to_regnum): Likewise.
(spu_gdbarch_init): Install them. Append DWARF unwinders.
This patch fixes a problem that prevented use of the Dwarf unwinders on SPU,
because dwarf2-frame.c common code did not support the situation where the
stack and/or frame pointer is maintained in a *vector* register. This is
because read_addr_from_reg is hard-coded to assume that such pointers can
be read from registers via a simple get_frame_register / unpack_pointer
operation.
Now, there *is* a routine address_from_register that calls into the
appropriate tdep routines to handle pointer values in "weird" registers
like on SPU, but it turns out I cannot simply change dwarf2-frame.c to
use address_from_register. This is because address_from_register uses
value_from_register to create a (temporary) value, and that routine
at some point calls get_frame_id in order to set up that value's
VALUE_FRAME_ID entry.
However, the dwarf2-frame.c read_addr_from_reg routine will be called
during early unwinding (to unwind the frame's CFA), at which point the
frame's ID is not actually known yet! This would cause an assert.
On the other hand, we may notice that VALUE_FRAME_ID is only needed in the
value returned by value_from_register if that value is later used as an
lvalue. But this is obviously never done to the temporary value used in
address_from_register. So, if we could change address_from_register to
not call value_from_register but instead accept constructing a value
that doesn't have VALUE_FRAME_ID set, things should be fine.
To do that, we can change the value_from_register callback to accept
a FRAME_ID instead of a FRAME; the only existing uses of the FRAME
argument were either to extract its frame ID, or its gdbarch. (To
keep a way of getting at the latter, we also change the callback's
type from "f" to "m".) Together with the required follow-on changes
in the existing value_from_register implementations (including the
default one), this seems to fix the problem.
As another minor interface cleanup, I've removed the explicit TYPE
argument from address_from_register. This routine really always
uses a default pointer type, and in the new implementation it -to
some extent- relies on that fact, in that it will now no longer
handle types that require gdbarch_convert_register_p handling.
gdb:
2014-04-17 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (value_from_register): Make class "m" instead of "f".
Replace FRAME argument with FRAME_ID.
* gdbarch.c, gdbarch.h: Regenerate.
* findvar.c (default_value_from_register): Add GDBARCH argument;
replace FRAME by FRAME_ID. No longer call get_frame_id.
(value_from_register): Update call to gdbarch_value_from_register.
* value.h (default_value_from_register): Update prototype.
* s390-linux-tdep.c (s390_value_from_register): Update interface
and call to default_value_from_register.
* spu-tdep.c (spu_value_from_register): Likewise.
* findvar.c (address_from_register): Remove TYPE argument.
Do not call value_from_register; use gdbarch_value_from_register
with null_frame_id instead.
* value.h (address_from_register): Update prototype.
* dwarf2-frame.c (read_addr_from_reg): Use address_from_register.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for
address_from_register interface change.
PR 16846
* elflink.c (_bfd_elf_merge_symbol): Ignore TLS mismatch when
current bfd is a plugin. Don't always set type_change_ok
when old bfd is a plugin.
Hi,
We find gdb.base/printcmds.exp fails a lot on windows host, like this,
p ctable1[163]
$204 = 163 '£'
(gdb) FAIL: gdb.base/printcmds.exp: p ctable1[163]
however, on linux host,
p ctable1[163]
$205 = 163 '\243'
(gdb) PASS: gdb.base/printcmds.exp: p ctable1[163]
The printing related code is in valprint.c:print_wchar,
if (gdb_iswprint (w) && (!need_escape || (!gdb_iswdigit (w)
&& w != LCST ('8')
&& w != LCST ('9'))))
{
gdb_wchar_t wchar = w;
if (w == gdb_btowc (quoter) || w == LCST ('\\'))
obstack_grow_wstr (output, LCST ("\\"));
obstack_grow (output, &wchar, sizeof (gdb_wchar_t));
}
else
{
// print W in hex or octal digits
}
When I debug gdb on different hosts, I find
on windows host, gdb_iswprint (iswprint) returns true if 'w' is 163.
However, on linux host, iswprint returns false if 'w' is 163. Looks
this difference is caused by the charset. On Linux host,
the target-charset is ANSI_X3.4-1968, while on windows host, the
target-charset is CP1252.
We can see how target-charset affects the output. On linux host,
(gdb) set target-charset ASCII
(gdb) p ctable1[163]
$1 = 163 '\243'
(gdb) set target-charset CP1252
(gdb) p ctable1[163]
$2 = 163 '£'
we can print the pound sign too, and it shows target-charset does
affect the output.
This patch is to set target-charset temporarily to ASCII for some
charset-sensitive tests. Tested on arm-none-eabi and
powerpc-linux-gnu on mingw32 host. More than one hundred fails are
fixed.
gdb/testsuite:
2014-04-17 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (with_target_charset): New proc.
* gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
with_target_charset.
(test_print_strings): Likewise.
(test_repeat_bytes): Likewise.
* gdb.base/setvar.exp: Set target-charset to ASCII temporarily
for some tests.
Nowadays, we have one page on "GDB Types" generated by doxygen, but types
and macros referenced in doc are not linked to their definitions. This
patch tweaks the comments a little to use doxygen syntax so that these
types and macros are linked their definitions.
Is it OK?
gdb:
2014-04-17 Yao Qi <yao@codesourcery.com>
* gdbtypes.h: Update comments to link to types and macros'
definitions.
Install some sanity checks that sibling DIE offsets are not beyond the
defined limits of the DWARF input buffer in read_partial_die and skip_one_die.
2014-03-20 Keith Seitz <keiths@redhat.com>
PR gdb/15827
* dwarf2read.c (skip_one_die): Check that all relative-offset
sibling DIEs fall within range of the current reader's buffer.
(read_partial_die): Likewise.
2014-03-20 Keith Seitz <keiths@redhat.com>
PR gdb/15827
* gdb.dwarf2/corrupt.c: New file.
* gdb.dwarf2/corrupt.exp: New file.
[forgot to commit/push these with previous push]
If lookup_symbol_file tries to locate a member variable with NULL name:
/* A simple lookup failed. Check if the symbol was defined in
a base class. */
cleanup = make_cleanup (null_cleanup, NULL);
/* Find the name of the class and the name of the method,
variable, etc. */
prefix_len = cp_entire_prefix_len (name);
/* If no prefix was found, search "this". */
if (prefix_len == 0)
{
struct type *type;
struct symbol *this;
this = lookup_language_this (language_def (language_cplus), block);
if (this == NULL)
{
do_cleanups (cleanup);
return NULL;
}
type = check_typedef (TYPE_TARGET_TYPE (SYMBOL_TYPE (this)));
klass = xstrdup (TYPE_NAME (type));
nested = xstrdup (name);
}
TYPE_NAME (type) is NULL, so xstrdup (NULL) and boom!
This can happen, e.g., with clang++. See testsuite/gdb.cp/namelessclass.exp
or the bugzilla report.
This patch simply adds a fencepost against this case, allowing the caller
of lookup_symbol_file to search other blocks for the right symbol.
If lookup_symbol_file tries to locate a member variable with NULL name:
/* A simple lookup failed. Check if the symbol was defined in
a base class. */
cleanup = make_cleanup (null_cleanup, NULL);
/* Find the name of the class and the name of the method,
variable, etc. */
prefix_len = cp_entire_prefix_len (name);
/* If no prefix was found, search "this". */
if (prefix_len == 0)
{
struct type *type;
struct symbol *this;
this = lookup_language_this (language_def (language_cplus), block);
if (this == NULL)
{
do_cleanups (cleanup);
return NULL;
}
type = check_typedef (TYPE_TARGET_TYPE (SYMBOL_TYPE (this)));
klass = xstrdup (TYPE_NAME (type));
nested = xstrdup (name);
}
TYPE_NAME (type) is NULL, so xstrdup (NULL) and boom!
This can happen, e.g., with clang++. See testsuite/gdb.cp/namelessclass.exp
or the bugzilla report.
This patch simply adds a fencepost against this case, allowing the caller
of lookup_symbol_file to search other blocks for the right symbol.
* lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
Add comment.
(gdbserver_default_get_comm_port): New function.
(gdbserver_start): Check if board file provided
"gdbserver,get_comm_port" and use it if so.
* boards/native-stdio-gdbserver.exp (sockethost): Set to "".
(gdb,socketport): Set to "stdio".
(gdbserver,get_comm_port): Set to ${board}_get_comm_port.
(stdio_gdbserver_template): Delete.
(${board}_get_remote_address): Update.
(${board}_build_remote_cmd): Delete.
(${board}_get_comm_port): New function.
(${board}_spawn): Update.
* boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
Delete.
(${board}_get_remote_address): Update.
(${board}_get_comm_port): New function.
https://sourceware.org/ml/gdb-patches/2014-04/msg00210.html
Improve the regexp used in the memattr.exp test so allow for different
memory regions (.data / .bss) being laid out in different orders.
gdb/testsuite/ChangeLog:
* gdb.base/memattr.exp: Improve regexps to handle memory regions
appearing in any order.
2014-04-15 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* layout.cc (Layout::include_section): Allow a target to decide
whether to include a section.
* target.h (Target::should_include_section): New function.
(Target::do_should_include_section): New function.
2014-04-15 Sasa Stankovic <Sasa.Stankovic@imgtec.com>
gold/
* copy-relocs.cc (Copy_relocs::Copy_reloc_entry::emit): Remove and
inline into ...
(Copy_relocs::emit): ... here.
* copy-relocs.h (Copy_reloc_entry): Change from class to struct.
(Copy_reloc_entry::make_copy_reloc): Change from private to protected.
(Copy_reloc_entry::entries_): Change from private to protected.
The AArch64 TLSDESC to IE relaxation code uses a bit mask intended to
ensure that destination register in a relaxed ldr instruction is
always X0. The mask has an off by one error resulting in the most
significant bit of the destination register being retained in the
relaxed instruction. The issue generally appears when the compiler
emits TLS accesses code under high register pressure resulting in a
broken code sequence.
