The howto for R_FT32_18 was using complain_overflow_signed. But some
valid address calculations exceed the range of this reloc. Changing it
to complain_overflow_dont allows them.
bfd/ChangeLog:
* elf32-ft32.c (ft32_elf_howto_table): Use
complain_overflow_dont for R_FT32_18.
elf64_vms_close_and_cleanup calls bfd_get_size, which calls
iovec->bstat. cache_bstat ends up adding the bfd to the cache lru
list, negating the bfd_cache_close call in bfd_close_all_done. So
there is a dangling pointer into the freed and then reused bfd. Thus,
bfd_cache_close must be called after _close_and_cleanup, or better,
via iovec->bclose.
PR binutils/22032
* opncls.c (bfd_close_all_done): Don't call bfd_cache_close
before _close_and_cleanup. Call iovec->bclose after.
(bfd_close): Remove code common to, and call, bfd_close_all_done.
Complement commit 5b5f4e6f8c ("ld: Early detection of orphans we know
will be discarded") and add `.MIPS.options' to the list of sections
discarded with orphan tests, removing failures like:
./ld-new: error: unplaced orphan section `.MIPS.options' from `tmpdir/orphan-11.o'.
FAIL: ld-elf/orphan-11
and:
./ld-new: error: unplaced orphan section `.MIPS.options' from `tmpdir/orphan-12.o'.
FAIL: ld-elf/orphan-12
from n64 MIPS testing.
ld/
* testsuite/ld-elf/orphan-11.ld: Also discard `.MIPS.options'
sections.
Since both elf32-i386.c and elf64-x86-64.c support targets with
different ELF_MACHINE_CODEs, _bfd_x86_elf_link_hash_table_create
should check target_id instead of elf_machine_code.
* elfxx-x86.c (_bfd_x86_elf_link_hash_table_create): Check
target_id instead of elf_machine_code.
Fix a bug in commit a6ebf6169a ("MIPS: Convert cross-mode BAL to
JALX") and in BFD linker relaxation correct the microMIPS interpretation
of the branch offset, which is supposed to be shifted by 1 bit, rather
than 2 as in the regular MIPS case.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Correct microMIPS
branch offset interpretation.
gas/
* testsuite/gas/mips/branch-addend-micromips.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n32.d: New test.
* testsuite/gas/mips/branch-addend-micromips-n64.d: New test.
* testsuite/gas/mips/branch-addend-micromips.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/bal-jalx-addend-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-addend-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-local-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n32.d: New
test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-micromips-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Fix a bug in commit 8b10b0b3e1 ("MIPS: Add options to control branch
ISA checks") and with the `-mignore-branch-isa' command-line option also
lift a GAS check for invalid MIPS16 branches between ISA modes, which is
made separately from regular MIPS and microMIPS checks.
gas/
* config/tc-mips.c (md_convert_frag): Respect
`mips_ignore_branch_isa'.
* testsuite/gas/mips/branch-local-5.d: New test.
* testsuite/gas/mips/branch-local-n32-5.d: New test.
* testsuite/gas/mips/branch-local-n64-5.d: New test.
* testsuite/gas/mips/branch-local-6.d: New test.
* testsuite/gas/mips/branch-local-n32-6.d: New test.
* testsuite/gas/mips/branch-local-n64-6.d: New test.
* testsuite/gas/mips/branch-local-7.d: New test.
* testsuite/gas/mips/branch-local-n32-7.d: New test.
* testsuite/gas/mips/branch-local-n64-7.d: New test.
* testsuite/gas/mips/branch-local-ignore-5.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-5.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-5.d: New test.
* testsuite/gas/mips/branch-local-ignore-6.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-6.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-6.d: New test.
* testsuite/gas/mips/branch-local-5.l: New stderr output.
* testsuite/gas/mips/branch-local-6.l: New stderr output.
* testsuite/gas/mips/branch-local-5.s: New test source.
* testsuite/gas/mips/branch-local-6.s: New test source.
* testsuite/gas/mips/branch-local-7.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
In the TLS GD/LD to LE optimization, ld replaces a sequence like
addi 3,2,x@got@tlsgd R_PPC64_GOT_TLSGD16 x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
with
addis 3,13,x@tprel@ha R_PPC64_TPREL16_HA x
addi 3,3,x@tprel@l R_PPC64_TPREL16_LO x
nop
When the tprel offset is small, this can be further optimized to
nop
addi 3,13,x@tprel
nop
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add do_tls_opt.
(ppc64_elf_tls_optimize): Set it.
(ppc64_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO and TPREL16_LO_DS relocs to use r13 when
addis would add zero.
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add do_tls_opt.
(ppc_elf_tls_optimize): Set it.
(ppc_elf_relocate_section): Nop addis on TPREL16_HA, and convert
insn on TPREL16_LO relocs to use r2 when addis would add zero.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Nop addis on
TPREL16_HA, and convert insn on TPREL16_LO and TPREL16_LO_DS
relocs to use r2/r13 when addis would add zero.
ld/
* testsuite/ld-powerpc/tls.s: Add calls with tls markers.
* testsuite/ld-powerpc/tls32.s: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Run tls marker tests.
* testsuite/ld-powerpc/tls.d: Adjust for TPREL16_HA/LO optimization.
* testsuite/ld-powerpc/tlsexe.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
* testsuite/ld-powerpc/tlsmark.d: Likewise.
* testsuite/ld-powerpc/tlsopt4.d: Likewise.
* testsuite/ld-powerpc/tlstoc.d: Likewise.
There isn't a good reason for ld.bfd to behave differently from gold
in the code generated by TLS GD/LD to LE optimization.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): When optimizing
__tls_get_addr call sequences to LE, don't move the addi down
to the nop. Replace the bl with addi and leave the nop alone.
ld/
* testsuite/ld-powerpc/tls.d: Update.
* testsuite/ld-powerpc/tlsexe.d: Update.
* testsuite/ld-powerpc/tlsexetoc.d: Update.
* testsuite/ld-powerpc/tlsld.d: Update.
* testsuite/ld-powerpc/tlsmark.d: Update.
* testsuite/ld-powerpc/tlsopt4.d: Update.
* testsuite/ld-powerpc/tlstoc.d: Update.
FreeBSD/mips kernels were recently changed to include the floating
point implementation revision register in the floating point register
set exported in process cores and via ptrace() (r318067). This change
will first ship in FreeBSD 12.0 when it is eventually released. The
space used to hold FIR was previously reserved in 'struct fpreg' as a
zero-filled dummy for padding, so 'struct fpreg' has not changed in
size. Since FIR should be non-zero on all MIPS processors supported
by FreeBSD, ignore a value of 0 from 'struct fpreg' and only report
non-zero values as a valid FIR register.
gdb/ChangeLog:
* mips-fbsd-nat.c (getfpregs_supplies): Return true for FIR.
* mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Split supply of FSR
out of loop and add supply of FIR.
(mips_fbsd_collect_fpregs): Split collect of FSR out of loop and
add collect of FIR.
This implements the special __tls_get_addr_opt call stub for powerpc
gold that returns __thread variable addresses without actually making
a call to __tls_get_addr in most cases. Shared libraries that are
loaded at program load time (ie. dlopen is not used) have a known
layout for their __thread variables, and thus DTPMOD64/DPTREL64 pairs
describing those variables can be set up by ld.so for the
__tls_get_addr_opt call stub fast exit.
Ref https://sourceware.org/ml/libc-alpha/2015-03/msg00626.html
I really, really wish I'd used a differently versioned __tls_get_addr
symbol than the base symbol to indicate glibc support for the
optimized call, rather than having glibc export __tls_get_addr_opt. A
lot of the messing around here, flipping symbols from __tls_get_addr
to __tls_get_addr_opt, is caused by that decision. About the only
benefit is that a user can see at a glance that their disassembled
code is calling __tls_get_addr via the fancy call stub.. Anyway, we
need references to __tls_get_addr to seem like they were to
__tls_get_addr_opt, and in cases like the tsan interceptor, a
definition of __tls_get_addr to seem like one of __tls_get_addr_opt
as well. That's the reason for Symbol::clear_in_reg and
Symbol_table::clone, and why symbols are substituted in Scan::global
and other places dealing with dynamic linking.
elfcpp/
* elfcpp.h (DT_PPC_OPT): Define.
* powerpc.h (PPC_OPT_TLS): Define.
gold/
* options.h (tls_get_addr_optimize): New option.
* symtab.h (Symbol::clear_in_reg, clone): New functions.
(Sized_symbol::clone): New function.
(Symbol_table::clone): New function.
* resolve.cc (Symbol::clone, Sized_symbol::clone): New functions.
* powerpc.cc (Target_powerpc::has_tls_get_addr_opt_,
tls_get_addr_, tls_get_addr_opt_): New vars.
(Target_powerpc::tls_get_addr_opt, tls_get_addr,
is_tls_get_addr_opt, replace_tls_get_addr,
set_has_tls_get_addr_opt, stk_linker): New functions.
(Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call): Add
target param. Update callers. Compare symbols rather than names.
(Target_powerpc::do_define_standard_symbols): Init tls_get_addr_
and tls_get_addr_opt_.
(Target_powerpc::Branch_info::mark_pltcall): Translate tls_get_addr
sym to tls_get_addr_opt.
(Target_powerpc::Branch_info::make_stub): Likewise.
(Stub_table::define_stub_syms): Likewise.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
(add_3_12_2, add_3_12_13, bctrl, beqlr, cmpdi_11_0, cmpwi_11_0,
ld_11_1, ld_11_3, ld_12_3, lwz_11_3, lwz_12_3, mr_0_3, mr_3_0,
mtlr_11, std_11_1): New constants.
(Stub_table::eh_frame_added_): Delete.
(Stub_table::tls_get_addr_opt_bctrl_, plt_fde_len_, plt_fde_): New vars.
(Stub_table::init_plt_fde): New functions.
(Stub_table::add_eh_frame, replace_eh_frame): Move definition out
of line. Init and use plt_fde_.
(Stub_table::plt_call_size): Return size for tls_get_addr stub.
Extract alignment code to..
(Stub_table::plt_call_align): ..this new function. Adjust all callers.
(Stub_table::add_plt_call_entry): Set has_tls_get_addr_opt and
tls_get_addr_opt_bctrl, and align after that.
(Stub_table::do_write): Write out tls_get_addr stub.
(Target_powerpc::do_finalize_sections): Emit DT_PPC_OPT
PPC_OPT_TLS/PPC64_OPT_TLS bit.
(Target_powerpc::Relocate::relocate): Don't check for or modify
nop following bl for tls_get_addr stub.
On 64-bit targets there is a 32-bit hole in symbol->u_, and another
due to symbol flags exceeding 32 bits. By splitting the union,
the total size of the class reduces by one 64-bit word.
* symtab.h (Symbol): Split u_ into u1_ and u2_. Adjust accessors
to suit. Move plt_offset_ before got_offsets_.
* symtab.cc (Symbol::init_fields): Adjust for union change.
(Symbol::init_base_output_data): Likewise.
(Symbol::init_base_output_segment): Likewise.
(Symbol::allocate_base_common): Likewise.
(Symbol::output_section): Likewise.
(Symbol::set_output_section): Likewise.
(Symbol::set_output_segment): Likewise.
* resolve.cc (Symbol::override_base): Likewise.
(Symbol::override_base_with_special): Likewise.
gold/ChangeLog:
PR gold/21868
* aarch64.cc (AArch64_relobj::try_fix_erratum_843419_optimized):
Add extra view offset argument to function.
(AArch64_relobj::fix_errata_and_relocate_erratum_stubs): Add
extra view offset set to the output offset when the view has
is_input_output_view set, since it has not already been
included. Pass this to try_fix_erratum_843419_optimized.
Since _bfd_elf_ifunc_get_synthetic_symtab is no longer called by x86
get_synthetic_symtab, it is now unused. This patch removes it.
* elf-bfd.h (_bfd_elf_ifunc_get_synthetic_symtab): Removed.
* elf-ifunc.c (_bfd_elf_ifunc_get_synthetic_symtab): Likewise.
Commit
Command names: make them case sensitive
3d7b173c29
made command name lookup case sensitive. However, define_command, used
when creating a user-defined command, converts the command name to
lowercase, assuming that the command name lookup works in a case
insensitive way. This causes user-defined commands with capital letters
in their name to only be callable with a lowercase version:
(gdb) define Foo
Type commands for definition of "Foo".
End with a line saying just "end".
>print 1
>end
(gdb) Foo
Undefined command: "Foo". Try "help".
(gdb) foo
$1 = 1
This patch removes that conversion to lowercase, so that the user can
call the command with the same name they provided.
gdb/ChangeLog:
* cli/cli-script.c (define_command): Don't convert command name
to lower case.
gdb/testsuite/ChangeLog:
* gdb.base/commands.exp (user_defined_command_case_sensitivity):
New proc, call it from toplevel.
If a custom linker script with an unexpected relative layout of .got
and .got.plt sections was used, gold might produce a wrong offset
when applying R_AARCH64_TLSDESC_* relocations.
This patch fixes the issue by calculating "got_tlsdesc_offset"
in a more direct way.
gold/
* aarch64.cc (Target_aarch64::Relocate::relocate_tls):
Make got_tlsdesc_offset signed and fix its calculation.
* testsuite/Makefile.am (aarch64_tlsdesc): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_tlsdesc.s: New test source file.
* testsuite/aarch64_tlsdesc.sh: New test script.
* testsuite/aarch64_tlsdesc.t: New test linker script.
This patch provides a flag for PowerPC64 ELFv2 use in class Symbol,
and modifies Sized_target::resolve to return whether the symbol has
been resolved. If not, normal processing continues. I use this for
PowerPC64 ELFv2 to keep track of whether a symbol has any definition
with non-zero localentry, in order to disable --plt-localentry for
that symbol.
PR 21847
* powerpc.cc (Target_powerpc::is_elfv2_localentry0): Test
non_zero_localentry.
(Target_powerpc::resolve): New function.
(powerpc_info): Set has_resolve for 64-bit.
* target.h (Sized_target::resolve): Return bool.
* resolve.cc (Symbol_table::resolve): Continue with normal
processing when target resolve returns false.
* symtab.h (Symbol::non_zero_localentry, set_non_zero_localentry):
New accessors.
(Symbol::non_zero_localentry_): New flag bit.
* symtab.cc (Symbol::init_fields): Init non_zero_localentry_.
We shpouldn't generate copy relocation to resolve reference to protected
data symbol defined in shared object with the NO_COPY_ON_PROTECTED
property. This patch adds a bit to elf_obj_tdata as well as
elf_i386_link_hash_entry and elf_x86_64_link_hash_entry to track the bfd
with the NO_COPY_ON_PROTECTED property as well as protected symbol
defined in shared object. extern_protected_data is set to FALSE if any
input relocatable file contains the NO_COPY_ON_PROTECTED property.
bfd/
PR ld/21997
* elf-bfd.h (elf_obj_tdata): Use ENUM_BITFIELD on object_id,
dyn_lib_class and has_gnu_symbols. Change bad_symtab to bitfield.
Add a has_no_copy_on_protected bitfield.
(elf_has_no_copy_on_protected): New.
* elf-properties.c (_bfd_elf_parse_gnu_properties): Set
elf_has_no_copy_on_protected for GNU_PROPERTY_NO_COPY_ON_PROTECTED.
(elf_merge_gnu_property_list): Likewise.
(_bfd_elf_link_setup_gnu_properties): Set extern_protected_data
to FALSE for elf_has_no_copy_on_protected.
* elf32-i386.c (SYMBOL_NO_COPYRELOC): New.
(elf_i386_link_hash_entry): Add def_protected.
(elf_i386_adjust_dynamic_symbol): Also check SYMBOL_NO_COPYRELOC
when checking info->nocopyreloc.
(elf_i386_link_setup_gnu_properties): Don't set
extern_protected_data here.
(elf_i386_merge_symbol_attribute): New function.
(elf_backend_merge_symbol_attribute): New.
* elf64-x86-64.c (SYMBOL_NO_COPYRELOC): New.
(elf_x86_64_link_hash_entry): Add def_protected.
(elf_x86_64_need_pic): Report protected symbol for def_protected.
(elf_x86_64_adjust_dynamic_symbol): Also check SYMBOL_NO_COPYRELOC
when checking info->nocopyreloc.
(elf_x86_64_relocate_section): Also check for R_X86_64_PC32
relocation run-time overflow and unresolvable R_X86_64_32S
relocation against protected data symbol defined in shared object
with GNU_PROPERTY_NO_COPY_ON_PROTECTED.
(elf_x86_64_link_setup_gnu_properties): Don't set
extern_protected_data here.
(elf_x86_64_merge_symbol_attribute): New function.
(elf_backend_merge_symbol_attribute): New.
ld/
PR ld/21997
* testsuite/ld-i386/i386.exp: Run PR ld/21997 tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr21997-1a.S: New file.
* testsuite/ld-i386/pr21997-1b.c: Likewise.
* testsuite/ld-i386/pr21997-1c.S: Likewise.
* testsuite/ld-x86-64/pr21997-1a.S: Likewise.
* testsuite/ld-x86-64/pr21997-1a.err: Likewise.
* testsuite/ld-x86-64/pr21997-1b.c: Likewise.
* testsuite/ld-x86-64/pr21997-1b.err: Likewise.
* testsuite/ld-x86-64/pr21997-1c.c: Likewise.
Tidy how these are handled in PIEs.
* elf32-ppc.c (must_be_dyn_reloc): Use bfd_link_dll. Comment.
(ppc_elf_check_relocs): Only set DF_STATIC_TLS in shared libs.
(ppc_elf_relocate_section): Comment fix.
* elf64-ppc.c (must_be_dyn_reloc): Use bfd_link_dll. Comment.
(ppc64_elf_check_relocs): Only set DF_STATIC_TLS in shared libs.
Support dynamic relocs for TPREL16 when non-pic too.
(dec_dynrel_count): Adjust TPREL16 handling as per check_relocs.
(ppc64_elf_relocate_section): Support dynamic relocs for TPREL16
when non-pic too.
The function is always called with DISPP set to NULL, so there is
no need for this parameter anymore. This patch removes it, and
eliminates some dead code associated to that.
gdb/ChangeLog:
* ada-lang.c (ada_lookup_struct_elt_type): Remove parameter "dispp".
Update all callers accordingly. Remove all code blocks handling
the case where DISPP is not NULL.
Tested on x86_64-linux, no regression.
These functions apply to thread, and not inferiors (in the gdbserver
sense, the abstraction for threads and processes, as in
inferior_list). Therefore, it would make more sense if these functions
were named with "thread" rather than "inferior".
gdb/gdbserver/ChangeLog:
* inferiors.h (inferior_target_data): Rename to ...
(thread_target_data): ... this.
(inferior_regcache_data): Rename to ...
(thread_regcache_data): ... this.
(set_inferior_regcache_data): Rename to ...
(set_thread_regcache_data): ... this.
* inferiors.c (inferior_target_data): Rename to ...
(thread_target_data): ... this.
(inferior_regcache_data): Rename to ...
(thread_regcache_data): ... this.
(set_inferior_regcache_data): Rename to ...
(set_thread_regcache_data): ... this.
(free_one_thread): Update.
* linux-low.h (get_thread_lwp): Update.
* regcache.c (get_thread_regcache): Update.
(regcache_invalidate_thread): Update.
(free_register_cache_thread): Update.
* win32-i386-low.c (update_debug_registers_callback): Update.
(win32_get_current_dr): Update.
* win32-low.c (thread_rec): Update.
(delete_thread_info): Update.
(continue_one_thread): Update.
(suspend_one_thread): Update.
PR 21994
* readelf.c (process_version_sections <SHT_GNU_verdef>): Check
vd_aux and vda_next for sanity. Delete "end". Correct overflow
checks.
(process_version_sections <SHT_GNU_verneed>): Correct overflow
check. Don't report invalid vna_next on overflow. Do report
invalid vna_next on size less than aux info.
The inferior (thread) target data is always set through add_thread.
gdb/gdbserver/ChangeLog:
* inferiors.c (set_inferior_target_data): Remove.
* inferiors.h (set_inferior_target_data): Remove.
Replace regexp with string match to workaround dejagnu 1.4.4 which
complains:
ERROR: bad switch "-fPIE": must be -all, -about, -indices, -inline, -expanded, -line, -linestop, -lineanchor, -nocase, -start, or --
* testsuite/ld-i386/i386.exp (undefined_weak): Replace regexp
with string match.
* testsuite/ld-x86-64/x86-64.exp (undefined_weak): Likewise.
Run pr22001-1b on x32 since R_X86_64_32S relocation can be turned into
dynamic R_X86_64_32 relocation which won't overflow on x32.
* testsuite/ld-x86-64/x86-64.exp: Run pr22001-1b on x32.
