mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
ee2fdd6f36
187 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
H.J. Lu
|
ee2fdd6f36 |
x86: Support Intel IBT with IBT property and IBT-enable PLT
To support IBT in Intel Control-flow Enforcement Technology (CET) instructions: https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0) are added to GNU program properties to indicate that all executable sections are compatible with IBT when ENDBR instruction starts each valid target where an indirect branch instruction can land. GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on all relocatable inputs. The followings changes are made to the Procedure Linkage Table (PLT): 1. For 64-bit x86-64, PLT is changed to PLT0: push GOT[1] bnd jmp *GOT[2] nop ... PLTn: endbr64 push namen_reloc_index bnd jmp PLT0 together with the second PLT section: PLTn: endbr64 bnd jmp *GOT[namen_index] nop BND prefix is also added so that IBT-enabled PLT is compatible with MPX. 2. For 32-bit x86-64 (x32) and i386, PLT is changed to PLT0: push GOT[1] jmp *GOT[2] nop ... PLTn: endbr64 # endbr32 for i386. push namen_reloc_index jmp PLT0 together with the second PLT section: PLTn: endbr64 # endbr32 for i386. jmp *GOT[namen_index] nop BND prefix isn't used since MPX isn't supported on x32 and BND registers aren't used in parameter passing on i386. GOT is an array of addresses. Initially, GOT[namen_index] is filled with the address of the ENDBR instruction of the corresponding entry in the first PLT section. The function, namen, is called via the ENDBR instruction in the second PLT entry. GOT[namen_index] is updated to the actual address of the function, namen, at run-time. 2 linker command line options are added: 1. -z ibtplt: Generate IBT-enabled PLT. 2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program properties as well as IBT-enabled PLT. bfd/ * elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New. (elf_i386_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_lazy_ibt_plt0_entry): Likewise. (elf_i386_non_lazy_ibt_plt_entry): Likewise. (elf_i386_pic_non_lazy_ibt_plt_entry): Likewise. (elf_i386_eh_frame_lazy_ibt_plt): Likewise. (elf_i386_lazy_plt_layout): Likewise. (elf_i386_non_lazy_plt_layout): Likewise. (elf_i386_link_hash_entry): Add plt_second. (elf_i386_link_hash_table): Add plt_second and plt_second_eh_frame. (elf_i386_allocate_dynrelocs): Use the second PLT if needed. (elf_i386_size_dynamic_sections): Use .plt.got unwind info for the second PLT. Check the second PLT. (elf_i386_relocate_section): Use the second PLT to resolve PLT reference if needed. (elf_i386_finish_dynamic_symbol): Fill and use the second PLT if needed. (elf_i386_finish_dynamic_sections): Set sh_entsize on the second PLT. Generate unwind info for the second PLT. (elf_i386_plt_type): Add plt_second. (elf_i386_get_synthetic_symtab): Support the second PLT. (elf_i386_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_i386_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_i386_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. * elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New. (elf_x32_lazy_ibt_plt_entry): Likewise. (elf_x86_64_non_lazy_ibt_plt_entry): Likewise. (elf_x32_non_lazy_ibt_plt_entry): Likewise. (elf_x86_64_eh_frame_lazy_ibt_plt): Likewise. (elf_x32_eh_frame_lazy_ibt_plt): Likewise. (elf_x86_64_lazy_ibt_plt): Likewise. (elf_x32_lazy_ibt_plt): Likewise. (elf_x86_64_non_lazy_ibt_plt): Likewise. (elf_x32_non_lazy_ibt_plt): Likewise. (elf_x86_64_get_synthetic_symtab): Support the second PLT. (elf_x86_64_parse_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. (elf_x86_64_merge_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT (elf_x86_64_link_setup_gnu_properties): If info->ibt is set, turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT is set on all relocatable inputs. binutils/ * readelf.c (decode_x86_feature): New. (print_gnu_property_note): Call decode_x86_feature on GNU_PROPERTY_X86_FEATURE_1_AND. * testsuite/binutils-all/i386/empty.d: New file. * testsuite/binutils-all/i386/empty.s: Likewise. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/ibt.s: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/empty.s: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/ibt.s: Likewise. include/ * bfdlink.h (bfd_link_info): Add ibtplt and ibt. * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New. (GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise. ld/ * Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh. * Makefile.in: Regenerated. * NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt and -z ibt. * emulparams/cet.sh: New file. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-1.s: Likewise. * testsuite/ld-i386/ibt-plt-2.s: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3.s: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3b.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/plt-main-ibt.dd: Likewise. * testsuite/ld-i386/plt-pie-ibt.dd: Likewise. * testsuite/ld-i386/property-x86-empty.s: Likewise. * testsuite/ld-i386/property-x86-ibt.s: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2.s: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3.s: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/property-x86-empty.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt.s: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * emulparams/elf32_x86_64.sh: Source emulparams/cet.sh. (TINY_READONLY_SECTION): Add .plt.sec. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Source emulparams/cet.sh. * ld.texinfo: Document -z ibtplt and -z ibt. * testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr21481b.S (check): Updated for x32. |
||
Andrew Burgess
|
7bdf4127c3 |
ld: Allow section groups to be resolved as part of a relocatable link
This commit adds a new linker feature: the ability to resolve section groups as part of a relocatable link. Currently section groups are automatically resolved when performing a final link, and are carried through when performing a relocatable link. By carried through this means that one copy of each section group (from all the copies that might be found in all the input files) is placed into the output file. Sections that are part of a section group will not match input section specifiers within a linker script and are forcibly kept as separate sections. There is a slight resemblance between section groups and common section. Like section groups, common sections are carried through when performing a relocatable link, and resolved (allocated actual space) only at final link time. However, with common sections there is an ability to force the linker to allocate space for the common sections when performing a relocatable link, there's currently no such ability for section groups. This commit adds such a mechanism. This new facility can be accessed in two ways, first there's a command line switch --force-group-allocation, second, there's a new linker script command FORCE_GROUP_ALLOCATION. If one of these is used when performing a relocatable link then the linker will resolve the section groups as though it were performing a final link, the section group will be deleted, and the members of the group will be placed like normal input sections. If there are multiple copies of the group (from multiple input files) then only one copy of the group members will be placed, the duplicate copies will be discarded. Unlike common sections that have the --no-define-common command line flag, and INHIBIT_COMMON_ALLOCATION linker script command there is no way to prevent group resolution during a final link, this is because the ELF gABI specifically prohibits the presence of SHT_GROUP sections in a fully linked executable. However, the code as written should make adding such a feature trivial, setting the new resolve_section_groups flag to false during a final link should work as you'd expect. bfd/ChangeLog: * elf.c (_bfd_elf_make_section_from_shdr): Don't initially mark SEC_GROUP sections as SEC_EXCLUDE. (bfd_elf_set_group_contents): Replace use of abort with an assert. (assign_section_numbers): Use resolve_section_groups flag instead of relocatable link type. (_bfd_elf_init_private_section_data): Use resolve_section_groups flag instead of checking the final_link flag for part of the checks in here. Fix white space as a result. * elflink.c (elf_link_input_bfd): Use resolve_section_groups flag instead of relocatable link type. (bfd_elf_final_link): Likewise. include/ChangeLog: * bfdlink.h (struct bfd_link_info): Add new resolve_section_groups flag. ld/ChangeLog: * ld.h (struct args_type): Add force_group_allocation field. * ldgram.y: Add support for FORCE_GROUP_ALLOCATION. * ldlex.h: Likewise. * ldlex.l: Likewise. * lexsup.c: Likewise. * ldlang.c (unique_section_p): Check resolve_section_groups flag not the relaxable link flag. (lang_add_section): Discard section groups when we're resolving groups. Clear the SEC_LINK_ONCE flag if we're resolving section groups. * ldmain.c (main): Initialise resolve_section_groups flag in link_info based on command line flags. * testsuite/ld-elf/group11.d: New file. * testsuite/ld-elf/group12.d: New file. * testsuite/ld-elf/group12.ld: New file. * NEWS: Mention new features. * ld.texinfo (Options): Document --force-group-allocation. (Miscellaneous Commands): Document FORCE_GROUP_ALLOCATION. |
||
|
H.J. Lu
|
a91e1603af |
Support ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
|
||
|
H.J. Lu
|
46bed6796d |
ld: Support ELF GNU program properties
From .note.gnu.property section in each ELF input, we build a list of
GNU properties if .note.gnu.property section isn't corrupt. The unknown
properties are ignored. All property lists in relocatable inputs are
merged into an output property list. When -z stack-size=N is used and
N isn't 0, the GNU_PROPERTY_STACK_SIZE property will be merged with or
added to the output property list. .note.gnu.property section is
generated in output from the output property list.
bfd/
* Makefile.am (BFD32_BACKENDS): Add elf-properties.lo.
(BFD32_BACKENDS_CFILES): Add elf-properties.c.
* configure.ac (elf): Add elf-properties.lo.
* Makefile.in: Regenerated.
* configure: Likewise.
* elf-bfd.h (elf_property_kind): New.
(elf_property): Likewise.
(elf_property_list): Likewise.
(elf_properties): Likewise.
(_bfd_elf_parse_gnu_properties): Likewise.
(_bfd_elf_get_property): Likewise.
(_bfd_elf_link_setup_gnu_properties): Likewise.
(elf_backend_data): Add parse_gnu_properties, merge_gnu_properties
and setup_gnu_properties.
(elf_obj_tdata): Add properties.
* elf-properties.c: New file.
* elf32-i386.c (elf_i386_parse_gnu_properties): New.
(elf_i386_merge_gnu_properties): Likewise.
(elf_backend_parse_gnu_properties): Likewise.
(elf_backend_merge_gnu_properties): Likewise.
* elf64-x86-64.c (elf_x86_64_parse_gnu_properties): Likewise.
(elf_x86_64_merge_gnu_properties): Likewise.
(elf_backend_parse_gnu_properties): Likewise.
(elf_backend_merge_gnu_properties): Likewise.
* elfxx-target.h (elf_backend_merge_gnu_properties): Likewise.
(elf_backend_parse_gnu_properties): Likewise.
(elf_backend_setup_gnu_properties): Likewise.
(elfNN_bed): Add elf_backend_parse_gnu_properties,
elf_backend_merge_gnu_properties and
elf_backend_setup_gnu_properties.
ld/
* ld/NEWS: Mention support for ELF GNU program properties.
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Call
ELF setup_gnu_properties.
* testsuite/ld-i386/i386.exp: Run property tests for Linux/i386.
* testsuite/ld-i386/pass.c: New file.
* testsuite/ld-i386/property-1.r: Likewise.
* testsuite/ld-i386/property-2.r: Likewise.
* testsuite/ld-i386/property-3.r: Likewise.
* testsuite/ld-i386/property-4.r: Likewise.
* testsuite/ld-i386/property-5.r: Likewise.
* testsuite/ld-i386/property-6.r: Likewise.
* testsuite/ld-i386/property-6a.c: Likewise.
* testsuite/ld-i386/property-6b.c: Likewise.
* testsuite/ld-i386/property-6c.S: Likewise.
* testsuite/ld-i386/property-7.r: Likewise.
* testsuite/ld-i386/property-no-copy.S: Likewise.
* testsuite/ld-i386/property-stack.S: Likewise.
* testsuite/ld-i386/property-unsorted-1.S: Likewise.
* testsuite/ld-i386/property-unsorted-2.S: Likewise.
* testsuite/ld-i386/property-x86-1.S: Likewise.
* testsuite/ld-i386/property-x86-2.S: Likewise.
* testsuite/ld-x86-64/pass.c: Likewise.
* testsuite/ld-x86-64/property-1.r: Likewise.
* testsuite/ld-x86-64/property-2.r: Likewise.
* testsuite/ld-x86-64/property-3.r: Likewise.
* testsuite/ld-x86-64/property-4.r: Likewise.
* testsuite/ld-x86-64/property-5.r: Likewise.
* testsuite/ld-x86-64/property-6.r: Likewise.
* testsuite/ld-x86-64/property-6a.c: Likewise.
* testsuite/ld-x86-64/property-6b.c: Likewise.
* testsuite/ld-x86-64/property-6c.S: Likewise.
* testsuite/ld-x86-64/property-7.r: Likewise.
* testsuite/ld-x86-64/property-no-copy.S: Likewise.
* testsuite/ld-x86-64/property-stack.S: Likewise.
* testsuite/ld-x86-64/property-unsorted-1.S: Likewise.
* testsuite/ld-x86-64/property-unsorted-2.S: Likewise.
* testsuite/ld-x86-64/property-x86-1.S: Likewise.
* testsuite/ld-x86-64/property-x86-2.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run property tests for
Linux/x86-64.
|
||
|
Andrew Burgess
|
14ea2c1b23 |
ld: Track changes to default region LMA even for empty sections
Given a linker script fragment like this:
SECTIONS {
. = 0x1000;
.text : AT(0x100) { *(.text) }
.data : AT(0x200) { *(.data) }
.rodata : AT(0x300) { *(.rodata) }
}
and an input file containing sections, '.text', '.data.1', and
'.rodata', then we'd expect the linker to place '.text' and '.rodata' in
the obvious way, and the '.data.1' orphan section would be located after
the '.data' section (assuming similar section properties).
Further, I believe that the expectation would be that the LMA for the
orphan '.data.1' section would start from 0x200 (as there is no '.data'
content).
However, right now, the LMA for '.data.1' would be 0x101, following on
from the '.text' section, this is because the change in LMA for the
'.data' section is not noticed by the linker, if there's no content in
the '.data' section.
What can be even more confusing to a user (though the cause is obvious
once you understand what's going on) is that adding some content to
'.data' will cause the orphan '.data.1' to switch to an LMA based off of
0x200.
This commit changes the behaviour so that an empty section that is in
the default lma region, and sets its lma, will adjust the lma of the
default region, this change will then be reflected in following sections
within the default lma memory region.
There's a new test to cover this issue that passes on a range of
targets, however, some targets generate additional sections, or have
stricter memory region size requirements that make it harder to come
up with a generic pass pattern, that still tests the required
features. For now I've set the test to ignore these targets.
ld/ChangeLog:
* ldlang.c (lang_size_sections_1): Shortcut loop only after
tracking changes to the default regions LMA.
* testsuite/ld-elf/orphan-9.ld: Extend header comment.
* testsuite/ld-elf/orphan-10.d: New file.
* testsuite/ld-elf/orphan-10.s: New file.
* NEWS: Mention change in behaviour.
|
||
|
Andrew Burgess
|
77f5e65ecf |
ld: better handling of lma region for orphan sections
When picking an lma_region for an orphan section we currently create a
new lang_output_section_statement_type and then populate this with the
orphan section.
The problem is that the lang_output_section_statement_type has a prev
pointer that links back to the previous output section. For non-orphan
output sections, that are created in linker script order, the prev
pointer will point to the output section that appears previous in linker
script order, as you'd probably expect.
The problem is that orphan sections are placed after processing the
linker script, and so, in the case of an output section created for an
orphan input section, the prev pointer actually points to the last
output section created.
This causes some unexpected behaviour when the orphan section is not
placed after the last non-orphan section that was created.
For example, consider this linker script:
MEMORY {
TEXT : ORIGIN = 0x200, LENGTH = 0x10
RODATA : ORIGIN = 0x400, LENGTH = 0x10
}
SECTIONS {
.text : {*(.text) } AT>TEXT
.data : AT(0x300) { *(.data) }
.rodata : { *(.rodata) } AT>RODATA
}
If we are processing an orphan section '.data.1' and decide to place
this after '.data', then the output section created will have a prev
pointer that references the '.rodata' output section. The result of
this is that '.data.1' will actually be assigned to the RODATA lma
region, which is probably not the expected behaviour.
The reason why '.data.1' is placed into the lma region of the '.rodata'
section is that lma region propagation is done at the time we create the
output section, based on the previous output section pointer, which is
really just a last-output-section-created pointer at that point in time,
though the prev point is fixed up later to reflect the true order of the
output sections.
The solution I propose in this commit is to move the propagation of lma
regions into a separate pass of the linker, rather than performing this
as part of the enter/exit of output sections during linker script
parsing.
During this later phase we have all of the output sections to hand, and
the prev/next points have been fixed up by this point to reflect the
actual placement ordering.
There's a new test to cover this issue that passes on a range of
targets, however, some targets generate additional sections, or have
stricter memory region size requirements that make it harder to come
up with a generic pass pattern, that still tests the required
features. For now I've set the test to ignore these targets.
ld/ChangeLog:
* ldlang.c (lang_leave_output_section_statement): Move lma_region
logic to...
(lang_propagate_lma_regions): ...this new function.
(lang_process): Call new function.
* testsuite/ld-elf/orphan-9.d: New file.
* testsuite/ld-elf/orphan-9.ld: New file.
* testsuite/ld-elf/orphan-9.s: New file.
* NEWS: Mention change in behaviour.
|
||
|
Andrew Burgess
|
d7488716ee |
ld/arc: Change default linker emulation for nps400
If we are configuring for an arc/linux target, and --with-cpu=nps400 is used at configure time then change the default linker emulation to the nps specific version. All of the alternative linker emulations are still available using the -mNAME option for ld. ld/ChangeLog: * configure.tgt (arc*-*-linux*): Change the default linker emulation based on --with-cpu selection. * NEWS: Mention new configuration option. |
||
Alan Modra
|
2571583aed | Update year range in copyright notice of all files. | ||
Dimitar Dimitrov
|
0220170b4d |
PRU LD Port
* NEWS: Mention new PRU target. * Makefile.am: Add PRU target. * configure.tgt: Ditto. * emulparams/pruelf.sh: New file. * emultempl/pruelf.em: New file. * scripttempl/pru.sc: New file. * Makefile.in: Regenerate. * testsuite/ld-pru/emit-relocs-1.d: New PRU testcase file. * testsuite/ld-pru/emit-relocs-1.ld: Ditto. * testsuite/ld-pru/emit-relocs-1a.s: Ditto. * testsuite/ld-pru/emit-relocs-1b.s * testsuite/ld-pru/ldi32.d: Ditto. * testsuite/ld-pru/ldi32.s: Ditto. * testsuite/ld-pru/ldi32_symbol.s: Ditto. * testsuite/ld-pru/norelax_ldi32-data.d: Ditto. * testsuite/ld-pru/norelax_ldi32-dis.d: Ditto. * testsuite/ld-pru/pcrel_s10.d: Ditto. * testsuite/ld-pru/pcrel_s10.s: Ditto. * testsuite/ld-pru/pcrel_s10_label.s: Ditto. * testsuite/ld-pru/pcrel_u8-illegal.d: Ditto. * testsuite/ld-pru/pcrel_u8-illegal.s: Ditto. * testsuite/ld-pru/pcrel_u8-illegal2.d: Ditto. * testsuite/ld-pru/pcrel_u8-illegal2.s: Ditto. * testsuite/ld-pru/pcrel_u8-illegal3.d: Ditto. * testsuite/ld-pru/pcrel_u8-illegal3.s: Ditto. * testsuite/ld-pru/pcrel_u8.d: Ditto. * testsuite/ld-pru/pcrel_u8.s: Ditto. * testsuite/ld-pru/pcrel_u8_label.s: Ditto. * testsuite/ld-pru/pmem.d: Ditto. * testsuite/ld-pru/pmem.s: Ditto. * testsuite/ld-pru/pmem_symbol.s: Ditto. * testsuite/ld-pru/pru.exp: Ditto. * testsuite/ld-pru/relax_ldi32-data.d: Ditto. * testsuite/ld-pru/relax_ldi32-dis.d: Ditto. * testsuite/ld-pru/relax_ldi32.s: Ditto. * testsuite/ld-pru/relax_ldi32_symbol.s: Ditto. * testsuite/ld-pru/reloc.d: Ditto. * testsuite/ld-pru/reloc.s: Ditto. * testsuite/ld-pru/reloc_symbol.s: Ditto. * testsuite/ld-pru/u16.d: Ditto. * testsuite/ld-pru/u16.s: Ditto. * testsuite/ld-pru/u16_symbol.s: Ditto. PRU does not export __end symbol because it is ambiguous for it. Users are expected to use instead the section markers __text_end, __data_end, __bss_end or __noinit_end. * testsuite/lib/ld-lib.exp (check_shared_lib_support): No shared libraries are supported for PRU. (check_gc_sections_available): Mark PRU as not supported. * testsuite/ld-elf/eh-frame-hdr.d: Disable for PRU. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr14926.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Mark sec64k case as too big for PRU. * testsuite/ld-srec/srec.exp (run_srec_test): Add setup for PRU. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu> |
||
Tristan Gingold
|
9703a4ef4d |
Add marker in NEWS files
binutils/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. gas/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. ld/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. |
||
|
Andrew Burgess
|
8f1732fc2a |
ld: Allow EXCLUDE_FILE to be used outside of the section list
Currently the EXCLUDE_FILE linker script construct can only be used
within the input section list, and applied only to the section pattern
immediately following the EXCLUDE_FILE. For example:
*.o (EXCLUDE_FILE (a.o) .text .rodata)
In this case all sections matching '.text' are included from all files
matching '*.o' but not from the file 'a.o'. All sections matching
'.rodata' are also included from all files matching '*.o' (incluing from
'a.o').
If the user wants to restrict the inclusion of section '.rodata' so that
this too is not taken from the file 'a.o' then the above example must be
extended like this:
*.o (EXCLUDE_FILE (a.o) .text EXCLUDE_FILE (a.o) .rodata)
However, due to the internal grammar of the linker script language the
snippet 'EXCLUDE_FILE (a.o) .text' is parsed by a pattern called
'wildcard_spec'. The same 'wildcard_spec' pattern is also used to parse
the input file name snippet '*.o' in the above examples. As a result of
this pattern reuse within the linker script grammar then the following
is also a valid linker script construct:
EXCLUDE_FILE (a.o) *.o (.text .rodata)
However, though the linker accepts this without complaint the
EXCLUDE_FILE part is silently ignored and has no effect.
This commit takes this last example and makes it a useful, valid,
construct. The last example now means to include sections '.text' and
'.rodata' from all files matching '*.o' except for the file 'a.o'.
If the list of input sections is long, and the user knows that the file
exclusion applies across the list then the second form might be a
clearer alternative to replicating the EXCLUDE_FILE construct.
I've added a set of tests for EXCLUDE_FILE to the linker, including
tests for the new functionality.
ld/ChangeLog:
* ldlang.h (struct lang_wild_statement_struct): Add
exclude_name_list field.
* ldlang.c (walk_wild_file_in_exclude_list): New function.
(walk_wild_consider_section): Use new
walk_wild_file_in_exclude_list function.
(walk_wild_file): Add call to walk_wild_file_in_exclude_list.
(print_wild_statement): Print new exclude_name_list field.
(lang_add_wild): Initialise new exclude_name_list field.
* testsuite/ld-scripts/exclude-file-1.d: New file.
* testsuite/ld-scripts/exclude-file-1.map: New file.
* testsuite/ld-scripts/exclude-file-1.t: New file.
* testsuite/ld-scripts/exclude-file-2.d: New file.
* testsuite/ld-scripts/exclude-file-2.map: New file.
* testsuite/ld-scripts/exclude-file-2.t: New file.
* testsuite/ld-scripts/exclude-file-3.d: New file.
* testsuite/ld-scripts/exclude-file-3.map: New file.
* testsuite/ld-scripts/exclude-file-3.t: New file.
* testsuite/ld-scripts/exclude-file-4.d: New file.
* testsuite/ld-scripts/exclude-file-4.map: New file.
* testsuite/ld-scripts/exclude-file-4.t: New file.
* testsuite/ld-scripts/exclude-file-a.s: New file.
* testsuite/ld-scripts/exclude-file-b.s: New file.
* testsuite/ld-scripts/exclude-file.exp: New file.
* ld.texinfo (Input Section Basics): Update description of
EXCLUDE_FILE to cover the new features.
* NEWS: Mention new EXCLUDE_FILE usage.
|
||
Nick Clifton
|
e23eba971d |
Add support for RISC-V architecture.
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file. |
||
|
Nick Clifton
|
29063f8bfb |
Add support for disabling automatic generation of .eh_frame_hdr sections in ELF based linkers.
PR ld/20537 * emultempl/elf32.em: More OPTION_xxx values into an enum. Add OPTION_NO_EH_FRAME_HDR. (_add_options): Add support for --no-eh-frame-hdr. * ld.texinfo: Document new option. * lexsup.c (elf_shlib_list_options): List new option. * NEWS: Mention the new option. |
||
Thomas Preud'homme
|
0955507f6e |
Add support for stable secure gateway veneers addresses
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * bfd-in.h (bfd_elf32_arm_set_target_relocs): Add a new parameter for the input import library bfd. * bfd-in2.h: Regenerate. * elf32-arm.c (struct elf32_arm_link_hash_table): New in_implib_bfd and new_cmse_stub_offset fields. (stub_hash_newfunc): Initialize stub_offset and stub_template_size to -1. (elf32_arm_add_stub): Likewise for stub_offset. (arm_new_stubs_start_offset_ptr): New function. (arm_build_one_stub): Only allocate a stub_offset if it is -1. Allow empty SG veneers to have zero relocations. (arm_size_one_stub): Only initialize stub size and template information for non empty veneers. Do not update veneer section size if veneer already has an offset. (elf32_arm_create_stub): Return the stub entry pointer or NULL instead of a boolean indicating success or failure. (cmse_scan): Change stub_changed parameter into an integer pointer parameter cmse_stub_created to count the number of stub created and adapt to change of return value in elf32_arm_create_stub. (cmse_entry_fct_p): New function. (arm_list_new_cmse_stub): Likewise. (set_cmse_veneer_addr_from_implib): Likewise. (elf32_arm_size_stubs): Define cmse_stub_created, pass its address to cmse_scan instead of that of cmse_stub_changed to compute the number of stub created and use it to initialize stub_changed. Call set_cmse_veneer_addr_from_implib after all cmse_scan. Adapt to change of return value in elf32_arm_create_stub. Use arm_stub_section_start_offset () if not NULL to initialize size of secure gateway veneers section. Initialize stub_offset of Cortex-A8 erratum fix to -1. Use ret to hold return value. (elf32_arm_build_stubs): Use arm_stub_section_start_offset () if not NULL to initialize size of secure gateway veneers section. Adapt comment to stress the importance of zeroing veneer section content. (bfd_elf32_arm_set_target_relocs): Add new in_implib_bfd parameter to initialize eponymous field in struct elf32_arm_link_hash_table. ld/ * emultempl/armelf.em (in_implib_filename): Declare and initialize new variable. (arm_elf_create_output_section_statements): Open import input library file for writing and pass resulting in_implib_bfd to bfd_elf32_arm_set_target_relocs. (PARSE_AND_LIST_PROLOGUE): Define OPTION_IN_IMPLIB option. (PARSE_AND_LIST_LONGOPTS): Define --in-implib option. (PARSE_AND_LIST_OPTIONS): Add help message for --in-implib option. (PARSE_AND_LIST_ARGS_CASES): Handle new OPTION_IN_IMPLIB case. * ld.texinfo (--cmse-implib): Update to mention --in-implib. (--in-implib): Document new option. * NEWS: Likewise. * testsuite/ld-arm/arm-elf.exp (Secure gateway import library generation): add --defsym VER=1 to gas CLI. (Secure gateway import library generation: errors): Likewise. (Input secure gateway import library): New test. (Input secure gateway import library: no output import library): Likewise. (Input secure gateway import library: not an SG input import library): Likewise. (Input secure gateway import library: earlier stub section base): Likewise. (Input secure gateway import library: later stub section base): Likewise. (Input secure gateway import library: veneer comeback): Likewise. (Input secure gateway import library: entry function change): Likewise. * testsuite/ld-arm/cmse-implib.s: Add input import library testing. * testsuite/ld-arm/cmse-implib.rd: Update accordingly. * testsuite/ld-arm/cmse-new-implib.out: New file. * testsuite/ld-arm/cmse-new-implib.rd: Likewise. * testsuite/ld-arm/cmse-new-implib-no-output.out: Likewise. * testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out: Likewise. * testsuite/ld-arm/cmse-new-earlier-later-implib.out: Likewise. * testsuite/ld-arm/cmse-new-comeback-implib.rd: Likewise. * testsuite/ld-arm/cmse-new-wrong-implib.out: Likewise. |
||
|
Thomas Preud'homme
|
7635954182 |
Add support for creating ELF import libraries
2016-07-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf-bfd.h (elf_backend_filter_implib_symbols): Declare backend hook.
(_bfd_elf_filter_global_symbols): Declare.
* elf.c (_bfd_elf_filter_global_symbols): New function.
* elflink.c (elf_filter_global_symbols): Likewise.
(elf_output_implib): Likewise.
(bfd_elf_final_link): Call above function, failing if it does.
* elfxx-target.h (elf_backend_filter_implib_symbols): Define macro and
default it to NULL.
(elf_backend_copy_indirect_symbol): Fix spacing.
(elf_backend_hide_symbol): Likewise.
(elfNN_bed): Initialize elf_backend_filter_implib_symbols backend hook.
include/
* bfdlink.h (struct bfd_link_info): Declare new ldscript_def and
out_implib_bfd fields.
2016-07-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
Nick Clifton <nickc@redhat.com>
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Open import
library file for writing and initialize implib_bfd field of link_info
structure.
* emultempl/pe.em (pe_implib_filename): Remove variable declaration.
(OPTION_IMPLIB_FILENAME): Remove macro definition.
(gld${EMULATION_NAME}_add_options): Remove --out-implib option.
(gld_${EMULATION_NAME}_list_options): Likewise.
(gld${EMULATION_NAME}_handle_option): Likewise.
(gld_${EMULATION_NAME}_finish): Use command_line.out_implib_filename
instead of pe_implib_filename.
* emultempl/pep.em (pep_implib_filename): Remove variable declaration.
(OPTION_IMPLIB_FILENAME): Remove enumerator.
(gld${EMULATION_NAME}_add_options): Remove --out-implib option.
(gld_${EMULATION_NAME}_list_options): Likewise.
(gld${EMULATION_NAME}_handle_option): Likewise.
(gld_${EMULATION_NAME}_finish): Use command_line.out_implib_filename
instead of pep_implib_filename.
* ld.h (args_type): Declare new out_implib_filename field.
* ld.texinfo (--out-implib): Move documentation to arch-independent
part and rephrase to apply to ELF targets.
* ldexp.c (exp_fold_tree_1): Set ldscript_def field to 1 for symbols
defined in linker scripts.
* ldlex.h (enum option_values): Declare new OPTION_OUT_IMPLIB
enumerator.
* lexsup.c (ld_options): Add entry for new --out-implib switch.
(parse_args): Handle OPTION_OUT_IMPLIB case.
* testsuite/ld-elf/elf.exp (Generate empty import library): New test.
(Generate import library): Likewise.
* testsuite/ld-elf/implib.s: Likewise.
* testsuite/ld-elf/implib.rd: New file.
* testsuite/ld-elf/empty-implib.out: Likewise
|
||
|
Tristan Gingold
|
96a84ea350 |
Add marker for 2.27 branch.
binutils/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. gas/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. ld/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. |
||
|
H.J. Lu
|
647e4d4649 |
ld: Add a linker configure option --enable-relro
Add a configure option --enable-relro to decide whether -z relro should
be enabled in ELF linker by default. Default to yes for all Linux
targets, except FRV, HPPA, IA64 and MIPS, since many relro tests fail
on these targets.
PR ld/20283
* NEWS: Mention --enable-relro.
* configure.ac: Add --enable-relro.
(DEFAULT_LD_Z_RELRO): New. Set by --enable-relro.
* configure.tgt (ac_default_ld_z_relro): Default it to 1 for
some Linux targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.relro to DEFAULT_LD_Z_RELRO.
* testsuite/config/default.exp (ld_elf_shared_opt): New.
* testsuite/lib/ld-lib.exp (run_dump_test): Pass
$ld_elf_shared_opt to ld for ELF targets with shared object
support.
(run_ld_link_tests): Likewise.
|
||
Jiong Wang
|
1f56df9d0d |
[AArch64] Also puts value in place for R_AARCH64_RELATIVE
When handling absolute relocations for global symbols bind within the shared object, AArch64 will generate one dynamic RELATIVE relocation, but won't apply the value for this absolution relocations at static linking stage. This is different from AArch64 gold linker and x86-64. This is not a bug as AArch64 is RELA, there is only guarantee that relocation addend is placed in the relocation entry. But some system softwares originally writen for x86-64 might assume AArch64 bfd linker gets the same behavior as x86-64, then they could take advantage of this buy skipping those RELATIVE dynamic relocations if the load address is the same as the static linking address. This patch makes AArch64 BFD linker applies absolution relocations at static linking stage for scenario described above. Meanwhile old AArch64 android loader has a bug (PR19163) which relies on current linker behavior as a workaround, so the same option --no-apply-dynamic-relocs added. |
||
Matthew Fortune
|
cdf969539c |
Add new NOCROSSREFS_TO linker script command
NOCROSSREFS_TO is similar to the existing NOCROSSREFS command but only checks one direction of cross referencing. ld/ChangeLog * ld.texinfo: Document NOCROSSREFS_TO script command. * ldlang.h (struct lang_nocrossrefs): Add onlyfirst field. (lang_add_nocrossref_to): New prototype. * ldcref.c (check_local_sym_xref): Use onlyfirst to only look for symbols defined in the first section. (check_nocrossref): Likewise. * ldgram.y (NOCROSSREFS_TO): New script command. * ldlang.c (lang_add_nocrossref): Set onlyfirst to FALSE. (lang_add_nocrossref_to): New function. * ldlex.l (NOCROSSREFS_TO): New token. * NEWS: Mention NOCROSSREFS_TO. * testsuite/ld-scripts/cross4.t: New file. * testsuite/ld-scripts/cross5.t: Likewise. * testsuite/ld-scripts/cross6.t: Likewise. * testsuite/ld-scripts/cross7.t: Likewise. * testsuite/ld-scripts/crossref.exp: Run 4 new NOCROSSREFS_TO tests. |
||
|
H.J. Lu
|
4c10bbaa09 |
Add -z noreloc-overflow option to x86-64 ld
Add -z noreloc-overflow command-line option to the x86-64 ELF linker to
disable relocation overflow check. This can be used to avoid relocation
overflow check if there will be no dynamic relocation overflow at
run-time.
bfd/
PR ld/19807
* elf64-x86-64.c (elf_x86_64_relocate_section): Check
no_reloc_overflow_check to diable R_X86_64_32/R_X86_64_32S
relocation overflow check.
include/
PR ld/19807
* bfdlink.h (bfd_link_info): Add no_reloc_overflow_check.
ld/
PR ld/19807
* Makefile.am (ELF_X86_DEPS): Add
$(srcdir)/emulparams/reloc_overflow.sh.
* Makefile.in: Regenerated.
* NEWS: Mention -z noreloc-overflow.
* ld.texinfo: Document -z noreloc-overflow.
* emulparams/elf32_x86_64.sh: Source
${srcdir}/emulparams/reloc_overflow.sh.
* emulparams/elf_x86_64.sh: Likewise.
* emulparams/reloc_overflow.sh: New file.
* testsuite/ld-x86-64/pr19807-1.s: New file.
* testsuite/ld-x86-64/pr19807-1a.d: Likewise.
* testsuite/ld-x86-64/pr19807-1b.d: Likewise.
* testsuite/ld-x86-64/pr19807-2.s: Likewise.
* testsuite/ld-x86-64/pr19807-2a.d: Likewise.
* testsuite/ld-x86-64/pr19807-2b.d: Likewise.
* testsuite/ld-x86-64/pr19807-2c.d: Likewise.
* testsuite/ld-x86-64/pr19807-2d.d: Likewise.
* testsuite/ld-x86-64/pr19807-2e.d: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/19807 tests.
|
||
|
H.J. Lu
|
b8871f357f |
Properly implement STT_COMMON
The BFD configure option, --enable-elf-stt-common, can't be to used to
verify STT_COMMON implementation with the normal binutils build. Instead,
this patch removes it from BFD. It adds --elf-stt-common=[no|yes] to ELF
assembler/objcopy and adds -z common/-z nocommon to ld.
A configure option, --enable-elf-stt-common, is added to gas to specify
whether ELF assembler should generate common symbols with the STT_COMMON
type by default.
Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF
common symbols.
bfd/
PR ld/19645
* bfd.c (bfd): Change flags to 20 bits.
(BFD_CONVERT_ELF_COMMON): New.
(BFD_USE_ELF_STT_COMMON): Likewise.
(BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and
BFD_USE_ELF_STT_COMMON.
(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
* configure.ac: Remove --enable-elf-stt-common.
* elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for
common symbol depending on BFD_CONVERT_ELF_COMMON and
BFD_USE_ELF_STT_COMMON.
* elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for
STT_COMMON.
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check
STT_COMMON.
(elf_link_convert_common_type): New function.
(elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for
common symbol depending on BFD_CONVERT_ELF_COMMON and
BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx.
* elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON
and BFD_USE_ELF_STT_COMMON to object_flags.
(TARGET_LITTLE_SYM): Likewise.
* syms.c (BSF_KEEP_G): Renamed to ...
(BSF_ELF_COMMON): This.
* bfd-in2.h: Regenerated.
* config.in: Likewise.
* configure: Likewise.
binutils/
PR ld/19645
* NEWS: Mention --elf-stt-common= for objcopy.
* doc/binutils.texi: Document --elf-stt-common= for objcopy.
* objcopy.c (do_elf_stt_common): New.
(command_line_switch): Add OPTION_ELF_STT_COMMON.
(copy_options): Add --elf-stt-common=.
(copy_usage): Add --elf-stt-common=.
(copy_object): Also check do_elf_stt_common for ELF targets.
(copy_file): Handle do_elf_stt_common.
(copy_main): Handle OPTION_ELF_STT_COMMON.
* readelf.c (apply_relocations): Support STT_COMMON.
* testsuite/binutils-all/common-1.s: New file.
* testsuite/binutils-all/common-1a.d: Likewise.
* testsuite/binutils-all/common-1b.d: Likewise.
* testsuite/binutils-all/common-1c.d: Likewise.
* testsuite/binutils-all/common-1d.d: Likewise.
* testsuite/binutils-all/common-1e.d: Likewise.
* testsuite/binutils-all/common-1f.d: Likewise.
* testsuite/binutils-all/common-2.s: Likewise.
* testsuite/binutils-all/common-2a.d: Likewise.
* testsuite/binutils-all/common-2b.d: Likewise.
* testsuite/binutils-all/common-2c.d: Likewise.
* testsuite/binutils-all/common-2d.d: Likewise.
* testsuite/binutils-all/common-2e.d: Likewise.
* testsuite/binutils-all/common-2f.d: Likewise.
* testsuite/binutils-all/objcopy.exp
(objcopy_test_elf_common_symbols): New proc.
Run objcopy_test_elf_common_symbols for ELF targets
gas/
PR ld/19645
* NEWS: Mention --enable-elf-stt-common and --elf-stt-common=
for ELF assemblers.
* as.c (flag_use_elf_stt_common): New.
(show_usage): Add --elf-stt-common=.
(option_values): Add OPTION_ELF_STT_COMMON.
(std_longopts): Add --elf-stt-common=.
(parse_args): Handle --elf-stt-common=.
* as.h (flag_use_elf_stt_common): New.
* config.in: Regenerated.
* configure: Likewise.
* configure.ac: Add --enable-elf-stt-common and define
DEFAULT_GENERATE_ELF_STT_COMMON.
* gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON
and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set.
* doc/as.texinfo: Document --elf-stt-common=.
* testsuite/gas/elf/common3.s: New file.
* testsuite/gas/elf/common3a.d: Likewise.
* testsuite/gas/elf/common3b.d: Likewise.
* testsuite/gas/elf/common4.s: Likewise.
* testsuite/gas/elf/common4a.d: Likewise.
* testsuite/gas/elf/common4b.d: Likewise.
* testsuite/gas/i386/dw2-compress-3b.d: Likewise.
* testsuite/gas/i386/dw2-compressed-3b.d: Likewise.
* testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a
and common4b.
* testsuite/gas/i386/dw2-compress-3.d: Renamed to ...
* testsuite/gas/i386/dw2-compress-3a.d: This. Pass
--elf-stt-common=no to as.
* testsuite/gas/i386/dw2-compressed-3.d: Renamed to ...
* testsuite/gas/i386/dw2-compressed-3a.d: This. Pass
--elf-stt-common=no to as.
* testsuite/gas/i386/i386.exp: Run dw2-compress-3a,
dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead
of dw2-compress-3 and dw2-compressed-3.
include/
PR ld/19645
* bfdlink.h (bfd_link_elf_stt_common): New enum.
(bfd_link_info): Add elf_stt_common.
ld/
PR ld/19645
* NEWS: Mention -z common/-z nocommon for ELF targets.
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle
-z common and -z nocommon.
* ld.texinfo: Document -z common/-z nocommon.
* lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon.
* testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and
--elf-stt-common=yes with assembler.
* testsuite/ld-elfcomm/common-1.s: New file.
* testsuite/ld-elfcomm/common-1a.d: Likewise.
* testsuite/ld-elfcomm/common-1b.d: Likewise.
* testsuite/ld-elfcomm/common-1c.d: Likewise.
* testsuite/ld-elfcomm/common-1d.d: Likewise.
* testsuite/ld-elfcomm/common-1e.d: Likewise.
* testsuite/ld-elfcomm/common-1f.d: Likewise.
* testsuite/ld-elfcomm/common-2.s: Likewise.
* testsuite/ld-elfcomm/common-2a.d: Likewise.
* testsuite/ld-elfcomm/common-2b.d: Likewise.
* testsuite/ld-elfcomm/common-2c.d: Likewise.
* testsuite/ld-elfcomm/common-2d.d: Likewise.
* testsuite/ld-elfcomm/common-2e.d: Likewise.
* testsuite/ld-elfcomm/common-2f.d: Likewise.
* testsuite/ld-elfcomm/common-3a.rd: Likewise.
* testsuite/ld-elfcomm/common-3b.rd: Likewise.
* testsuite/ld-i386/pr19645.d: Likewise.
* testsuite/ld-i386/pr19645.s: Likewise.
* testsuite/ld-x86-64/largecomm-1.s: Likewise.
* testsuite/ld-x86-64/largecomm-1a.d: Likewise.
* testsuite/ld-x86-64/largecomm-1b.d: Likewise.
* testsuite/ld-x86-64/largecomm-1c.d: Likewise.
* testsuite/ld-x86-64/largecomm-1d.d: Likewise.
* testsuite/ld-x86-64/largecomm-1e.d: Likewise.
* testsuite/ld-x86-64/largecomm-1f.d: Likewise.
* testsuite/ld-x86-64/pr19645.d: Likewise.
* testsuite/ld-x86-64/pr19645.s: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes
with assembler.
(assembler_generates_commons): Removed.
Run -z common/-z nocommon tests. Run *.d tests.
* testsuite/ld-i386/i386.exp: Run pr19645.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with
assembler. Test STT_COMMON with readelf.
|
||
|
H.J. Lu
|
aec6b87e0b |
[x86] Resolve non-PIC undefweak symbols in executable
For i386 and x86-64, non-PIC references to undefined weak symbols are resolved without dynamic relocation when creating executable. Resolved undefined weak symbols are removed from the dynamic symbol table in executable. One exception is on i386, we need resolved undefined weak symbols in the dynamic symbol table in PIE if input relocatable files contain branchs without PLT so that we can branch to 0 with dynamic relocation in text section. This makes behaviors of dynamic executable and position independent executable predictable with mixed PIC and non-PIC references to undefined weak symbols. If all references to undefined weak symbols are PIC, dynamic relocations against undefined weak symbols will be generated in executable unless -z nodynamic-undefined-weak is passed to linker. bfd/ PR ld/19636 PR ld/19704 PR ld/19719 * elf32-i386.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): New. (elf_i386_link_hash_entry): Add has_got_reloc and has_non_got_reloc. (elf_i386_link_hash_table): Add interp. (elf_i386_link_hash_newfunc): Initialize has_got_reloc and has_non_got_reloc. (elf_i386_copy_indirect_symbol): Copy has_got_reloc and has_non_got_reloc. (elf_i386_check_relocs): Set has_got_reloc and has_non_got_reloc. (elf_i386_fixup_symbol): New function. (elf_i386_pie_finish_undefweak_symbol): Likewise. (elf_i386_allocate_dynrelocs): Don't allocate space for dynamic relocations and discard relocations against resolved undefined weak symbols in executable. Don't make resolved undefined weak symbols in executable dynamic. Keep dynamic non-GOT/non-PLT relocation against undefined weak symbols in PIE. (elf_i386_size_dynamic_sections): Set interp to .interp section. (elf_i386_relocate_section): Don't generate dynamic relocations against resolved undefined weak symbols in PIE, except for R_386_PC32. (elf_i386_finish_dynamic_symbol): Keep PLT/GOT entries without dynamic PLT/GOT relocations for resolved undefined weak symbols. Don't generate dynamic relocation against resolved undefined weak symbol in executable. (elf_i386_finish_dynamic_sections): Call elf_i386_pie_finish_undefweak_symbol on all symbols in PIE. (elf_backend_fixup_symbol): New. * elf64-x86-64.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): New. (elf_x86_64_link_hash_entry): Add has_got_reloc and has_non_got_reloc. (elf_x86_64_link_hash_table): Add interp. (elf_x86_64_link_hash_newfunc): Initialize has_got_reloc and has_non_got_reloc. (elf_x86_64_copy_indirect_symbol): Copy has_got_reloc and has_non_got_reloc. (elf_x86_64_check_relocs): Set has_got_reloc and has_non_got_reloc. (elf_x86_64_fixup_symbol): New function. (elf_x86_64_pie_finish_undefweak_symbol): Likewise. (elf_x86_64_allocate_dynrelocs): Don't allocate space for dynamic relocations and discard relocations against resolved undefined weak symbols in executable. Don't make resolved undefined weak symbols in executable dynamic. (elf_x86_64_size_dynamic_sections): Set interp to .interp section. (elf_x86_64_relocate_section): Check relocation overflow for dynamic relocations against unresolved weak undefined symbols. Don't generate dynamic relocations against resolved weak undefined symbols in PIE. (elf_x86_64_finish_dynamic_symbol): Keep PLT/GOT entries without dynamic PLT/GOT relocations for resolved undefined weak symbols. Don't generate dynamic relocation against resolved undefined weak symbol in executable. (elf_x86_64_finish_dynamic_sections): Call elf_x86_64_pie_finish_undefweak_symbol on all symbols in PIE. (elf_backend_fixup_symbol): New. include/ PR ld/19636 PR ld/19704 PR ld/19719 * bfdlink.h (bfd_link_info): Add dynamic_undefined_weak. ld/ PR ld/19636 PR ld/19704 PR ld/19719 * Makefile.am (ELF_X86_DEPS): Add dynamic_undefined_weak.sh. * Makefile.in: Regenerated. * NEWS: Mention -z nodynamic-undefined-weak. * ld.texinfo: Document -z nodynamic-undefined-weak. * ldmain.c (main): Initialize dynamic_undefined_weak to -1. * emulparams/dynamic_undefined_weak.sh: New file. * emulparams/elf32_x86_64.sh: Source dynamic_undefined_weak.sh. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_i386_be.sh: Likewise. * emulparams/elf_i386_chaos.sh: Likewise. * emulparams/elf_i386_ldso.sh: Likewise. * emulparams/elf_i386_vxworks.sh: Likewise. * emulparams/elf_iamcu.sh: Likewise. * emulparams/elf_k1om.sh: Likewise. * emulparams/elf_l1om.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/extern_protected_data.sh (PARSE_AND_LIST_OPTIONS): Append. (PARSE_AND_LIST_ARGS_CASE_Z): Likewise. * testsuite/ld-elf/pr19719a.c: New file. * testsuite/ld-elf/pr19719b.c: Likewise. * testsuite/ld-elf/pr19719c.c: Likewise. * testsuite/ld-elf/pr19719d.c: Likewise. * testsuite/ld-i386/pr19636-1.s: Likewise. * testsuite/ld-i386/pr19636-1a.d: Likewise. * testsuite/ld-i386/pr19636-1b.d: Likewise. * testsuite/ld-i386/pr19636-1c.d: Likewise. * testsuite/ld-i386/pr19636-1d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1e.d: Likewise. * testsuite/ld-i386/pr19636-1f.d: Likewise. * testsuite/ld-i386/pr19636-1g.d: Likewise. * testsuite/ld-i386/pr19636-1h.d: Likewise. * testsuite/ld-i386/pr19636-1i.d: Likewise. * testsuite/ld-i386/pr19636-2.s: Likewise. * testsuite/ld-i386/pr19636-2a.d: Likewise. * testsuite/ld-i386/pr19636-2b.d: Likewise. * testsuite/ld-i386/pr19636-2c-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-i386/pr19636-2d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2d.d: Likewise. * testsuite/ld-i386/pr19636-2e-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2e.d: Likewise. * testsuite/ld-i386/pr19636-3.s: Likewise. * testsuite/ld-i386/pr19636-3a.d: Likewise. * testsuite/ld-i386/pr19636-3b.d: Likewise. * testsuite/ld-i386/pr19636-3c.d: Likewise. * testsuite/ld-i386/pr19636-3d.d: Likewise. * testsuite/ld-i386/pr19636-3e.d: Likewise. * testsuite/ld-i386/pr19636-3f.d: Likewise. * testsuite/ld-i386/pr19636-3g.d: Likewise. * testsuite/ld-i386/pr19636-4.s: Likewise. * testsuite/ld-i386/pr19636-4a.d: Likewise. * testsuite/ld-i386/pr19636-4b.d: Likewise. * testsuite/ld-i386/pr19636-4c.d: Likewise. * testsuite/ld-i386/pr19636-4d.d: Likewise. * testsuite/ld-i386/pr19704.out: Likewise. * testsuite/ld-i386/pr19704a.c: Likewise. * testsuite/ld-i386/pr19704b.c: Likewise. * testsuite/ld-x86-64/pr19636-1.s: Likewise. * testsuite/ld-x86-64/pr19636-1a.d: Likewise. * testsuite/ld-x86-64/pr19636-1b.d: Likewise. * testsuite/ld-x86-64/pr19636-1c.d: Likewise. * testsuite/ld-x86-64/pr19636-1d.d: Likewise. * testsuite/ld-x86-64/pr19636-1e.d: Likewise. * testsuite/ld-x86-64/pr19636-1f.d: Likewise. * testsuite/ld-x86-64/pr19636-1g.d: Likewise. * testsuite/ld-x86-64/pr19636-2.s: Likewise. * testsuite/ld-x86-64/pr19636-2a.d: Likewise. * testsuite/ld-x86-64/pr19636-2b.d: Likewise. * testsuite/ld-x86-64/pr19636-2c.d: Likewise. * testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2e.d: Likewise. * testsuite/ld-x86-64/pr19636-2f.d: Likewise. * testsuite/ld-x86-64/pr19636-2g.d: Likewise. * testsuite/ld-x86-64/pr19636-2h.d: Likewise. * testsuite/ld-x86-64/pr19636-2i.d: Likewise. * testsuite/ld-x86-64/pr19636-3.s: Likewise. * testsuite/ld-x86-64/pr19636-3a.d: Likewise. * testsuite/ld-x86-64/pr19636-3b.d: Likewise. * testsuite/ld-x86-64/pr19636-3c.d: Likewise. * testsuite/ld-x86-64/pr19636-3d.d: Likewise. * testsuite/ld-x86-64/pr19704.out: Likewise. * testsuite/ld-x86-64/pr19704a.c: Likewise. * testsuite/ld-x86-64/pr19704b.c: Likewise. * testsuite/ld-elf/shared.exp (mix_pic_and_non_pic): New. Run mix_pic_and_non_pic. * testsuite/ld-i386/i386.exp (undefined_weak): New. Run undefined_weak and PR ld/19636 tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr13082-3b.d: Updated. * testsuite/ld-x86-64/pr13082-4b.d: Likewise. |
||
|
Alan Modra
|
6f2750feaf | Copyright update for binutils | ||
|
Tristan Gingold
|
7feec526b7 |
Add markers for release 2.26
binutils/ 2015-11-13 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.26. gas/ 2015-11-13 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.26. ld/ 2015-11-13 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.26. |
||
Laurent Alfonsi
|
a504d23a83 |
Add --fix-stm32l4xx-629360 to the ARM linker to enable a link-time workaround for a bug in the bus matrix / memory controller for some of the STM32 Cortex-M4 based products (STM32L4xx).
bfd * bfd-in2.h: Regenerate.
* bfd-in.h (bfd_arm_stm32l4xx_fix): New enum. Specify how
STM32L4XX instruction scanning should be done.
(bfd_elf32_arm_set_stm32l4xx_fix)
(bfd_elf32_arm_stm32l4xx_erratum_scan)
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): Add prototypes.
(bfd_elf32_arm_set_target_relocs): Add stm32l4xx fix type argument
to prototype.
* elf32-arm.c (STM32L4XX_ERRATUM_VENEER_SECTION_NAME)
(STM32L4XX_ERRATUM_VENEER_ENTRY_NAME): Define macros.
(elf32_stm32l4xx_erratum_type): New enum.
(elf32_stm32l4xx_erratum_list): New struct. List of veneers or
jumps to veneers.
(_arm_elf_section_data): Add stm32l4xx_erratumcount,
stm32l4xx_erratumlist.
(elf32_arm_link_hash_table): Add stm32l4xx_erratum_glue_size,
stm32l4xx_fix and num_stm32l4xx_fixes fields.
(ctz): New function.
(popcount): New function.
(elf32_arm_link_hash_table_create): Initialize stm32l4xx_fix.
(put_thumb2_insn): New function.
(STM32L4XX_ERRATUM_LDM_VENEER_SIZE): Define. Size of a veneer for
LDM instructions.
(STM32L4XX_ERRATUM_VLDM_VENEER_SIZE): Define. Size of a veneer for
VLDM instructions.
(bfd_elf32_arm_allocate_interworking_sections): Initialise erratum
glue section.
(record_stm32l4xx_erratum_veneer) : New function. Create a single
veneer, and its associated symbols.
(bfd_elf32_arm_add_glue_sections_to_bfd): Add STM32L4XX erratum glue.
(bfd_elf32_arm_set_stm32l4xx_fix): New function. Set the type of
erratum workaround required.
(bfd_elf32_arm_stm32l4xx_fix_veneer_locations): New function. Find
out where veneers and branches to veneers have been placed in
virtual memory after layout.
(is_thumb2_ldmia): New function.
(is_thumb2_ldmdb): Likewise.
(is_thumb2_vldm ): Likewise.
(stm32l4xx_need_create_replacing_stub): New function. Decide if a
veneer must be emitted.
(bfd_elf32_arm_stm32l4xx_erratum_scan): Scan the sections of an
input BFD for potential erratum-triggering insns. Record results.
(bfd_elf32_arm_set_target_relocs): Set stm32l4xx_fix field in
global hash table.
(elf32_arm_size_dynamic_sections): Collect glue information.
(create_instruction_branch_absolute): New function.
(create_instruction_ldmia): Likewise.
(create_instruction_ldmdb): Likewise.
(create_instruction_mov): Likewise.
(create_instruction_sub): Likewise.
(create_instruction_vldmia): Likewise.
(create_instruction_vldmdb): Likewise.
(create_instruction_udf_w): Likewise.
(create_instruction_udf): Likewise.
(push_thumb2_insn32): Likewise.
(push_thumb2_insn16): Likewise.
(stm32l4xx_fill_stub_udf): Likewise.
(stm32l4xx_create_replacing_stub_ldmia): New function. Expands the
replacing stub for ldmia instructions.
(stm32l4xx_create_replacing_stub_ldmdb): Likewise for ldmdb.
(stm32l4xx_create_replacing_stub_vldm): Likewise for vldm.
(stm32l4xx_create_replacing_stub): New function. Dispatches the
stub emission to the appropriate functions.
(elf32_arm_write_section): Output veneers, and branches to veneers.
ld * ld.texinfo: Description of the STM32L4xx erratum workaround.
* emultempl/armelf.em (stm32l4xx_fix): New.
(arm_elf_before_allocation): Choose the type of fix, scan for
erratum.
(gld${EMULATION_NAME}_finish): Fix veneer locations.
(arm_elf_create_output_section_statements): Propagate
stm32l4xx_fix value.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_STM32L4XX_FIX.
(PARSE_AND_LIST_LONGOPTS): Add entry for handling
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_OPTION): Add entry for helping on
--fix-stm32l4xx-629360.
(PARSE_AND_LIST_ARGS_CASES): Treat OPTION_STM32L4XX_FIX.
tests * ld-arm/arm-elf.exp (armelftests_common): Add STM32L4XX
tests.
* ld-arm/stm32l4xx-cannot-fix-far-ldm.d: New.
* ld-arm/stm32l4xx-cannot-fix-far-ldm.s: Likewise.
* ld-arm/stm32l4xx-cannot-fix-it-block.d: Likewise.
* ld-arm/stm32l4xx-cannot-fix-it-block.s: Likewise.
* ld-arm/stm32l4xx-fix-all.d: Likewise.
* ld-arm/stm32l4xx-fix-all.s: Likewise.
* ld-arm/stm32l4xx-fix-it-block.d: Likewise.
* ld-arm/stm32l4xx-fix-it-block.s: Likewise.
* ld-arm/stm32l4xx-fix-ldm.d: Likewise.
* ld-arm/stm32l4xx-fix-ldm.s: Likewise.
* ld-arm/stm32l4xx-fix-vldm.d: Likewise.
* ld-arm/stm32l4xx-fix-vldm.s: Likewise.
|
||
|
Nick Clifton
|
6c3bc0f82c |
Reset x86 Linux targets to not compressing debug sections by default. Enable compression of debug sections by default in the linker, if so configured.
PR gas/19109 . * configure.ac: Note the 'none' is an acceptable argument to --enable-compressed-debug-sections. * configure: Regenerate. gas * configure.ac: Restore --enable-compressed-debug-sections. Do not enable compressed debug sections by default for x86 Linux targets. * configure: Regenerate. ld * configure.ac: Add --enable-compressed-debug-sections. * configure: Regenerate. * config.in: Regenerate. * ld.texinfo: Document how to determine the default action for debug sections. * ldmain.c (main): If DEFAULT_FLAG_COMPRESS_DEBUG is defined then set the compress_debug field of the link_info structure to zlib-gabi. * lexsup.c (elf_static_list_options): Output the default setting for the --compress-debug-sections option. * NEWS: Mention the new configure option. |
||
|
Nick Clifton
|
886a250647 |
New ARC implementation.
bfd * archures.c: Remove support for older ARC. Added support for new
ARC cpus (ARC600, ARC601, ARC700, ARCV2).
* bfd-in2.h: Likewise.
* config.bfd: Likewise.
* cpu-arc.c: Likewise.
* elf32-arc.c: Totally changed file with a refactored
inplementation of the ARC port.
* libbfd.h: Added ARC specific relocation types.
* reloc.c: Likewise.
gas * config/tc-arc.c: Revamped file for ARC support.
* config/tc-arc.h: Likewise.
* doc/as.texinfo: Add new ARC options.
* doc/c-arc.texi: Likewise.
ld * configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*.
* emulparams/arcebelf_prof.sh: New file
* emulparams/arcebelf.sh: Likewise.
* emulparams/arceblinux_prof.sh: Likewise.
* emulparams/arceblinux.sh: Likewise.
* emulparams/arcelf_prof.sh: Likewise.
* emulparams/arcelf.sh: Likewise.
* emulparams/arclinux_prof.sh: Likewise.
* emulparams/arclinux.sh: Likewise.
* emulparams/arcv2elfx.sh: Likewise.
* emulparams/arcv2elf.sh: Likewise.
* emultempl/arclinux.em: Likewise.
* scripttempl/arclinux.sc: Likewise.
* scripttempl/elfarc.sc: Likewise.
* scripttempl/elfarcv2.sc: Likewise
* Makefile.am: Add new ARC emulations.
* Makefile.in: Regenerate.
* NEWS: Mention the new feature.
opcodes * arc-dis.c: Revamped file for ARC support
* arc-dis.h: Likewise.
* arc-ext.c: Likewise.
* arc-ext.h: Likewise.
* arc-opc.c: Likewise.
* arc-fxi.h: New file.
* arc-regs.h: Likewise.
* arc-tbl.h: Likewise.
binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact
and ARCv2.
(get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT.
(guess_is_rela): Likewise.
(dump_relocations): Likewise.
(is_32bit_abs_reloc): Likewise.
(is_16bit_abs_reloc): Likewise.
(is_none_reloc): Likewise.
* NEWS: Mention the new feature.
include * dis-asm.h (arc_get_disassembler): Correct declaration.
* arc-reloc.def: Macro file with definition of all relocation
types.
* arc.h: Changed macros for the newly supported ARC cpus. Altered
enum defining the supported relocations.
* common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added
macro for EM_ARC_COMPACT2.
* arc-func.h: New file.
* arc.h: Likewise.
|
||
|
Andrew Burgess
|
c005eb9e34 |
ld: Extend options for altering orphan handling behaviour.
Replace the options --warn-orphan and --no-warn-orphan with a single option --orphan-handling=MODE, where mode can be place, warn, error, and discard. Mode 'place' is the default, and is the current behaviour, placing the orphan section into a suitable output section. Mode 'warn' is the same as '--warn-orphan'. The orphan is also placed using the same algorithm as for 'place'. Mode 'error' is the same as '--warn-orphan' and '--fatal-warnings'. Mode 'discard' assigns all output sections to the /DISCARD/ section. ld/ChangeLog: * ld.h (enum orphan_handling_enum): New. (ld_config_type): Remove warn_orphan, add orphan_handling. * ldemul.c (ldemul_place_orphan): Remove warning about orphan sections. * ldlang.c (ldlang_place_orphan): New function. (lang_place_orphans): Call ldlang_place_orphan. * ldlex.h (enum option_values): Remove OPTION_WARN_ORPHAN and OPTION_NO_WARN_ORPHAN, add OPTION_ORPHAN_HANDLING. * lexsup.c (ld_options): Remove 'warn-orphan' and 'no-warn-orphan', add 'orphan-handling'. (parse_args): Remove handling for OPTION_WARN_ORPHAN and OPTION_NO_WARN_ORPHAN, add handling for OPTION_ORPHAN_HANDLING. * NEWS: Replace text about --warn-orphan with --orphan-handling. * ld.texinfo (Options): Remove --warn-orphan entry and add entry on --orphan-handling. (Orphan Sections): Add reference to relevant command line options. ld/testsuite/ChangeLog: * ld-elf/elf.exp: Switch to rely on run_dump_test. * ld-elf/orphan-5.l: Update expected output. * ld-elf/orphan-5.d: New file. * ld-elf/orphan-6.d: New file. * ld-elf/orphan-6.l: New file. * ld-elf/orphan-7.d: New file. * ld-elf/orphan-7.map: New file. * ld-elf/orphan-8.d: New file. * ld-elf/orphan-8.map: New file. |
||
|
Andrew Burgess
|
0a61824343 |
ld: Add '--require-defined' command line option.
Add a new command line option '--require-defined' to the linker. This option operates identically to the '--undefined' option, except that if the symbol is not defined in the final output file then the linker will exit with an error. When making use of --gc-section, or just when trying to pull in parts of a library, it is not uncommon for a user to use the '--undefined' command line option to specify a symbol that the user then expects to be defined by one of the object files supplied to the link. However, if for any reason the symbol is not satisfied by an object provided to the link the user will be left with an undefined symbol in the output file, instead of a defined symbol. In some cases the above behaviour is what the user wants, in other cases though we can do better. The '--require-defined' option tries to fill this gap. The symbol passed to the '--require-defined' option is treated exactly as if the symbol was passed to '--undefined', however, before the linker exits a check is made that all symbols passed to '--require-defined' are actually defined, if any are not then the link will fail with an error. ld/ChangeLog: * ld.texinfo (Options): Document --require-defined option. * ldlang.c (struct require_defined_symbol): New structure. (require_defined_symbol_list): New variable. (ldlang_add_require_defined): New function. (ldlang_check_require_defined_symbols): New function. (lang_process): Check required symbols are defined. * ldlang.h (ldlang_add_require_defined): Declare. * ldlex.h (enum option_values): Add OPTION_REQUIRE_DEFINED_SYMBOL. * lexsup.c (ld_options): Add '--require-defined' entry. (parse_args): Handle '--require-defined' entry. * NEWS: Mention new '--require-defined' option. ld/testsuite/ChangeLog: * ld-undefined/require-defined-1.d: New file. * ld-undefined/require-defined-2.d: New file. * ld-undefined/require-defined-3.d: New file. * ld-undefined/require-defined-4.d: New file. * ld-undefined/require-defined-5.d: New file. * ld-undefined/require-defined.exp: New file. * ld-undefined/require-defined.s: New file. |
||
Kai Tietz
|
0f088b2a94 |
Add experimental support for --gc-sections with COFF and PE based targets.
PR ld/11539 bfd * coffcode.h (coff_bfd_gc_sections): Define default to bfd_coff_gc_sections function. * cofflink.c (init_reloc_cookie): Copy and adjust coff related code about gc-sections from elflink.c to here. (fini_reloc_cookie): Likewise. (init_reloc_cookie_rels): Likewise. (fini_reloc_cookie_rels): Likewise. (init_reloc_cookie_for_section): Likewise. (fini_reloc_cookie_for_section): Likewise. (_bfd_coff_gc_mark_hook): Likewise. (_bfd_coff_gc_mark_rsec): Likewise. (_bfd_coff_gc_mark_reloc): Likewise. (_bfd_coff_gc_mark): Likewise. (_bfd_coff_gc_mark_extra_sections): Likewise. (coff_gc_sweep_symbol_info): Likewise. (coff_gc_sweep_symbol): Likewise. (gc_sweep_hook_fn): Likewise. (coff_gc_sweep): Likewise. (bfd_coff_gc_sections): Likewise. (_bfd_coff_gc_keep): Likewise. * libcoff.h (coff_reloc_cookie): New struct. (bfd_coff_gc_sections): New prototype. (coff_gc_mark_hook_fn): New type. ld * scripttempl/pep.sc: Mark .idata*, .CRT*, .tls*, .rsrc*, .init, .ctor*, .dtor*, .fini, .jcr, .eh_frame, .pdata. .xdata, and .gcc_except_table sections as KEEP. * scripttempl/pe.sc: Likewise. |
||
|
Tristan Gingold
|
3604cb1f8c |
Add new ld option: --print-memory-usage
ld/ * NEWS: Mention new option. * lexsup.c (parse_args): Handle --print-memory-usage. (ld_options): Add --print-memory-usage. * ldmain.c (main): Call lang_print_memory_usage. * ldlex.h (enum option_values): Add OPTION_PRINT_MEMORY_USAGE. * ldlang.h: Add prototype of lang_print_memory_usage. * ldlang.c (lang_print_memory_size, lang_print_memory_usage): New functions. * ld.texinfo (Options): Document --print-memory-usage. * ld.h (args_type): Add print_memory_usage field. ld/testsuite/ * ld-scripts/print-memory-usage-1.t, * ld-scripts/print-memory-usage-1.s, * ld-scripts/print-memory-usage-1.l, * ld-scripts/print-memory-usage-2.t, * ld-scripts/print-memory-usage-2.l, * ld-scripts/print-memory-usage-3.s, * ld-scripts/print-memory-usage-3.t, * ld-scripts/print-memory-usage-3.l, * ld-scripts/print-memory-usage.t: New tests. * ld-scripts/print-memory-usage.exp: Run them. |
||
|
H.J. Lu
|
ea556d2590 |
Mention --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]
binutils/ * NEWS: Mention --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]. gas/ * NEWS: Mention --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]. ld/ * NEWS: Mention --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi]. |
||
|
Nick Clifton
|
3ea6077552 |
Add new linker option: --warn-orphan which generates warning messages when orphan sections are detected.
ld * ld.h (struct ld_config_type): Add new field: warn_orphan. * ldlex.h (enum option_values): Add OPTION_WARN_ORPHAN and OPTION_NO_WARN_ORPHAN. * lexsup.c (ld_options): Add --warn-orphan and --no-warn-orphan. (parse_args): Handle the new options. * ldemul.c (ldemul_place_orphan): If requested, generate a warning message when an orphan section is placed in the output file. * ld.texinfo: Document the new option. * NEWS: Mention the new feature. tests * ld-elf/orphan-5.l: New test - checks the linker's output with --warn-orphan enabled. * ld-elf/elf.exp: Run the new test. |
||
|
H.J. Lu
|
b0619670ab |
Mention support for LLVM plugin in NEWS
* NEWS: Mention support for LLVM plugin. |
||
|
Alan Modra
|
b90efa5b79 | ChangeLog rotatation and copyright year update | ||
Tristan Gingold
|
c50415e24c |
Add NEWS markers for 2.25.
binutils/ 2014-10-14 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.25. gas/ 2014-10-14 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.25. ld/ 2014-10-14 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.25. |
||
Linda Zhang
|
eeb14e5a5b |
Change the default behaviour of the PE targeted linker so that timestamps are
inserted. This is for compatibility with other, non-GNU tools. Deterministic binaries can still be created by using the new --no-insert-timestamp command line option. * emultempl/pe.em: Initialise insert_timestamp to true. Add a --no-insert-timestamp command line option. * emultempl/pep.em: Likewise. * ld.texinfo: Document that --insert-timestamp is enabled by default and that it now has an inverse command line option. * NEWS: Mention the new behaviour. |
||
Christian Svensson
|
73589c9dbd |
Remove support for the (deprecated) openrisc and or32 configurations and replace
with support for the new or1k configuration. |
||
Jon TURNEY
|
61e2488cd8 |
Add support for generating and inserting build IDs into COFF binaries.
* peXXigen.c (pe_print_debugdata): New function: Displays the
contents of the debug directory and decodes codeview entries.
(_bfd_XXi_swap_debugdir_in, _bfd_XXi_swap_debugdir_out)
(_bfd_XXi_slurp_codeview_record, _bfd_XXi_write_codeview_record):
Add functions for reading and writing debugdir and codeview
records.
* libpei.h (_bfd_XXi_swap_debugdir_in, _bfd_XXi_swap_debugdir_out)
(_bfd_XXi_write_codeview_record): Add prototypes and macros.
* libcoff-in.h (pe_tdata): Add build-id data.
* libcoff.h: Regenerate.
* coffcode.h (coff_write_object_contents): Run build_id
after_write_object_contents hook.
* pe.h (external_IMAGE_DEBUG_DIRECTORY, _CV_INFO_PDB70)
(_CV_INFO_PDB20): Add structures and constants for debug directory
and codeview records.
* internal.h (internal_IMAGE_DEBUG_DIRECTORY, CODEVIEW_INFO):
Add structures and constants for internal representation of debug
directory and codeview records.
* emultempl/elf32.em (id_note_section_size, read_hex, write_build_id):
Move code for parsing build-id option and calculating the build-id to...
* ldbuildid.c: New file.
* ldbuildid.h: New file.
* Makefile.am (CFILES, HFILES, OFILES, ld_new_SOURCES): Add new
files.
* Makefile.in: Regenerate.
* ld.texinfo: Update --build-id description to mention COFF
support.
* NEWS: Mention support for COFF build ids.
* emultempl/pe.em (gld${EMULATION_NAME}_handle_option):
(pecoff_checksum_contents, write_build_id, setup_build_id)
(gld_${EMULATION_NAME}_after_open): Handle and implement
build-id option.
* emultempl/pep.em: Likewise.
|
||
|
Alan Modra
|
4b95cf5c0c | Update copyright years | ||
Kuan-Lin Chen
|
35c081572f |
Add support for Andes NDS32:
BFD: * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add nds32 files. * Makefile.in: Regenerate. * archures.c (bfd_nds32_arch): Add nds32 target. * bfd-in2.h: Regenerate. * config.bfd (nds32*le-*-linux): Add bfd_elf32_nds32lelin_vec and bfd_elf32_nds32belin_vec. (nds32*be-*-linux*): Likewise. (nds32*le-*-*): Add bfd_elf32_nds32le_vec and bfd_elf32_nds32be_vec. (nds32*be-*-*): Likewise. * configure.in (bfd_elf32_nds32be_vec): Add elf32-nds32.lo. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. * configure: Regenerate. * cpu-nds32.c: New file for nds32. * elf-bfd.h: Add NDS32_ELF_DATA. * elf32-nds32.c: New file for nds32. * elf32-nds32.h: New file for nds32. * libbfd.h: Regenerate. * reloc.c: Add relocations for nds32. * targets.c (bfd_elf32_nds32be_vec): New declaration for nds32. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. BINUTILS: * readelf.c: Include elf/nds32.h (guess_is_rela): Add case for EM_NDS32. (dump_relocations): Add case for EM_NDS32. (decode_NDS32_machine_flags): New. (get_machine_flags): Add case for EM_NDS32. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (process_nds32_specific): New. (process_arch_specific): Add case for EM_NDS32. * NEWS: Announce Andes nds32 support. * MAINTAINERS: Add nds32 maintainers. TESTSUITE: * binutils-all/objdump.exp: Add NDS32 cpu. * binutils-all/readelf.r: Skip extra reloc created by NDS32. GAS: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nds32.c. (TARGET_CPU_HFILES): Add config/tc-nds32.h. * Makefile.in: Regenerate. * configure.in (nds32): Add nds32 target extension config support. * configure.tgt : Add case for nds32-*-elf* and nds32-*-linux*. * configure: Regenerate. * config/tc-nds32.c: New file for nds32. * config/tc-nds32.h: New file for nds32. * doc/Makefile.am (CPU_DOCS): Add c-nds32.texi. * doc/Makefile.in: Regenerate. * doc/as.texinfo: Add nds32 options. * doc/all.texi: Set NDS32. * doc/c-nds32.texi: New file dor nds32 document. * NEWS: Announce Andes nds32 support. TESTSUITE: * gas/all/gas.exp: Add expected failures for NDS32. * gas/elf/elf.exp: Likewise. * gas/lns/lns.exp: Use alternate test. * gas/macros/irp.d: Skip for NDS32. * gas/macros/macros.exp: Skip some tests for the NDS32. * gas/macros/rept.d: Skip for NDS32. * gas/macros/test3.d: Skip for NDS32. * gas/nds32: New directory. * gas/nds32/alu-1.s: New test. * gas/nds32/alu-1.d: Likewise. * gas/nds32/alu-2.s: Likewise. * gas/nds32/alu-2.d: Likewise. * gas/nds32/br-1.d: Likewise. * gas/nds32/br-1.s: Likewise. * gas/nds32/br-2.d: Likewise. * gas/nds32/br-2.s: Likewise. * gas/nds32/ji-jr.d: Likewise. * gas/nds32/ji-jr.s: Likewise. * gas/nds32/ls.d: Likewise. * gas/nds32/ls.s: Likewise. * gas/nds32/lsi.d: Likewise. * gas/nds32/lsi.s: Likewise. * gas/nds32/to-16bit-v1.d: Likewise. * gas/nds32/to-16bit-v1.s: Likewise. * gas/nds32/to-16bit-v2.d: Likewise. * gas/nds32/to-16bit-v2.s: Likewise. * gas/nds32/to-16bit-v3.d: Likewise. * gas/nds32/to-16bit-v3.s: Likewise. * gas/nds32/nds32.exp: New test driver. LD: * Makefile.am (ALL_EMULATION_SOURCES): Add nds32 target. * Makefile.in: Regenerate. * configure.tgt: Add case for nds32*le-*-elf*, nds32*be-*-elf*, nds32*le-*-linux-gnu*, and nds32*be-*-linux-gnu*. * emulparams/nds32belf.sh: New file for nds32. * emulparams/nds32belf_linux.sh: Likewise. * emulparams/nds32belf16m.sh: Likewise. * emulparams/nds32elf.sh: Likewise. * emulparams/nds32elf_linux.sh: Likewise. * emulparams/nds32elf16m.sh: Likewise. * emultempl/nds32elf.em: Likewise. * scripttempl/nds32elf.sc}: Likewise. * gen-doc.texi: Set NDS32. * ld.texinfo: Set NDS32. * NEWS: Announce Andes nds32 support. TESTSUITE: * lib/ld-lib.exp: Add NDS32 to list of targets that do not support shared library generation. * ld-nds32: New directory. * ld-nds32/branch.d: New test. * ld-nds32/branch.ld: New test. * ld-nds32/branch.s: New test. * ld-nds32/diff.d: New test. * ld-nds32/diff.ld: New test. * ld-nds32/diff.s: New test. * ld-nds32/gp.d: New test. * ld-nds32/gp.ld: New test. * ld-nds32/gp.s: New test. * ld-nds32/imm.d: New test. * ld-nds32/imm.ld: New test. * ld-nds32/imm.s: New test. * ld-nds32/imm_symbol.s: New test. * ld-nds32/relax_jmp.d: New test. * ld-nds32/relax_jmp.ld: New test. * ld-nds32/relax_jmp.s: New test. * ld-nds32/relax_load_store.d: New test. * ld-nds32/relax_load_store.ld: New test. * ld-nds32/relax_load_store.s: New test. * ld-nds32/nds32.exp: New file. OPCODES: * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nds32-asm.c and nds32-dis.c. * Makefile.in: Regenerate. * configure.in: Add case for bfd_nds32_arch. * configure: Regenerate. * disassemble.c (ARCH_nds32): Define. * nds32-asm.c: New file for nds32. * nds32-asm.h: New file for nds32. * nds32-dis.c: New file for nds32. * nds32-opc.h: New file for nds32. INCLUDE: * dis-asm.h (print_insn_nds32): Add nds32 target. * elf/nds32.h: New file for nds32. * opcode/nds32.h: New file for nds32. |
||
|
Tristan Gingold
|
58ca03a25d |
binutils/
2013-09-18 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.24. gas/ 2013-09-18 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.24. ld/ 2013-09-18 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.24. |
||
|
Nick Clifton
|
2e53f7d601 |
* ldexp.c: Add LOG2CEIL() builtin function to linker script language
* ldgram.y: Likewise * ldlex.l: Likewise * NEWS: Mention the new feature. * ld.texinfo: Document the new feature. * ld-scripts/log2.exp: New: Run the new log2 test. * ld-scripts/log2.s: Source for the new test. * ld-scripts/log2.t: Linker script for new test. |
||
|
Nick Clifton
|
1eec346e12 |
* ldgram.y: Add ALIGN_WITH_INPUT output section attribute.
* ldlang.c: Likewise. * ldlang.h: Likewise. * ldlex.l: Likewise. * mri.c: Likewise. * ld.texinfo: Document new feature. * NEWS: Mention new feature. * ld-scripts/script.exp: Run align with input test. * ld-scripts/align-with-input.t: New file. * ld-scripts/rgn-at8.d: Likewise. * ld-scripts/rgn-at8.t: Likewise. |
||
Richard Sandiford
|
e8044f355d |
* configure.ac (mips*-*-bsd*, mips*-*-ultrix*, mips*-*-osf*)
(mips*-*-ecoff*, mips*-*-pe*, mips*-*-irix* [v4 and earlier])
(mips*-*-lnews*, mips*-*-riscos*): Add gas and ld to noconfigdirs.
* configure: Regenerate.
gas/
* NEWS: Note removal of ECOFF support.
* doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF.
* Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h.
(MULTI_CFILES): Remove config/e-mipsecoff.c.
* Makefile.in: Regenerate.
* configure.in: Remove MIPS ECOFF references.
(mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff):
Delete cases.
(mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*)
(mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into...
(mips-*-*): ...this single case.
(mipsbecoff, mipslecoff, mipsecoff): Remove emulations. Expect
MIPS emulations to be e-mipself*.
* configure: Regenerate.
* configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*)
(mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*)
(mips-*-sysv*): Remove coff and ecoff cases.
* as.c (mipsbecoff, mipslecoff, mipsecoff): Remove.
* ecoff.c: Remove reference to MIPS ECOFF.
* config/e-mipsecoff.c, config/te-lnews.h: Delete files.
* config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete.
(RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases.
(mips_hi_fixup): Tweak comment.
(append_insn): Require a howto.
(mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code.
gas/testsuite/
* gas/all/gas.exp: Remove reference to mips-ecoff.
* gas/mips/branch-misc-1.d, gas/mips/branch-misc-2.d,
gas/mips/branch-misc-2-64.d, gas/mips/branch-misc-2pic.d,
gas/mips/branch-misc-2pic-64.d, gas/mips/branch-swap.d: Remove
skips for mips-*-ecoff.
ld/
* NEWS: Document the removal of MIPS ECOFF targets.
* ld.texinfo (--gpsize=@var{value}): Use MIPS ELF rather than
MIPS ECOFF as an example of a target that supports small data.
* ldmain.c (g_switch_value): Likewise.
* configure.tgt (mips*-*-pe, mips*-dec-ultrix*, mips*-dec-osf*)
(mips*-sgi-irix* [v4 and earlier], mips*el-*-ecoff*, mips*-*-ecoff*)
(mips*-*-bsd*, mips*-*-lnews*): Remove cases.
* Makefile.am (ALL_EMULATION_SOURCES): Remove emipsbig.c, emipsbsd.c,
emipsidt.c, emipsidtl.c, emipslit.c, emipslnews.c and emipspe.c.
(emipsbig.c, emipsbsd.c, emipsidt.c, emipsidtl.c, emipslit.c)
(emipslnews.c, emipspe.c): Delete rules.
* Makefile.in: Regenerate.
* emulparams/mipsbig.sh, emulparams/mipsbsd.sh, emulparams/mipsidt.sh,
emulparams/mipsidtl.sh, emulparams/mipslit.sh, emulparams/mipslnews.sh,
emulparams/mipspe.sh, emultempl/mipsecoff.em: Delete.
* emultempl/m68kcoff.em: Update comment to say that MIPS ECOFF support
has now been removed.
* emultempl/pe.em: Remove TARGET_IS_mipspe checks.
|
||
|
Nick Clifton
|
13761a1136 |
* archures.c: Add some more MSP430 machine numbers.
* config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions. |
||
Sandra Loosemore
|
36591ba149 |
2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
Andrew Jenner <andrew@codesourcery.com> Based on patches from Altera Corporation. bfd/ * Makefile.am (ALL_MACHINES): Add cpu-nios2.lo. (ALL_MACHINES_CFILES): Add cpu-nios2.c. (BFD_BACKENDS): Add elf32-nios2.lo. (BFD32_BACKENDS_CFILES): Add elf32-nios2.c. * Makefile.in: Regenerated. * configure.in: Add entries for bfd_elf32_bignios2_vec and bfd_elf32_littlenios2_vec. * configure: Regenerated. * config.bfd: Add cases for nios2. * archures.c (enum bfd_architecture): Add bfd_arch_nios2. (bfd_mach_nios2): Define. (bfd_nios2_arch): Declare. (bfd_archures_list): Add bfd_nios2_arch. * targets.c (bfd_elf32_bignios2_vec): Declare. (bfd_elf32_littlenios2_vec): Declare. (_bfd_target_vector): Add entries for bfd_elf32_bignios2_vec and bfd_elf32_littlenios2_vec. * elf-bfd.h (enum elf_target_id): Add NIOS2_ELF_DATA. * reloc.c (enum bfd_reloc_code_real): Add Nios II relocations. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * cpu-nios2.c: New file. * elf32-nios2.c: New file. opcodes/ * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and nios2-opc.c. * Makefile.in: Regenerated. * configure.in: Add case for bfd_nios2_arch. * configure: Regenerated. * disassemble.c (ARCH_nios2): Define. (disassembler): Add case for bfd_arch_nios2. * nios2-dis.c: New file. * nios2-opc.c: New file. include/ * dis-asm.h (print_insn_big_nios2): Declare. (print_insn_little_nios2): Declare. include/elf * nios2.h: New file. include/opcode/ * nios2.h: New file. gas/ * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c. (TARGET_CPU_HFILES): Add config/tc-nios2.h. * Makefile.in: Regenerated. * configure.tgt: Add case for nios2*-linux*. * config/obj-elf.c: Conditionally include elf/nios2.h. * config/tc-nios2.c: New file. * config/tc-nios2.h: New file. * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: Set NIOSII. * doc/as.texinfo (Overview): Add Nios II options. (Machine Dependencies): Include c-nios2.texi. * doc/c-nios2.texi: New file. * NEWS: Note Altera Nios II support. gas/testsuite/ * gas/nios2/add.d: New. * gas/nios2/add.s: New. * gas/nios2/align_fill.d: New. * gas/nios2/align_fill.s: New. * gas/nios2/align_text.d: New. * gas/nios2/align_text.s: New. * gas/nios2/and.d: New. * gas/nios2/and.s: New. * gas/nios2/branch.d: New. * gas/nios2/branch.s: New. * gas/nios2/break.d: New. * gas/nios2/break.s: New. * gas/nios2/bret.d: New. * gas/nios2/bret.s: New. * gas/nios2/cache.d: New. * gas/nios2/cache.s: New. * gas/nios2/call26.d: New. * gas/nios2/call26.s: New. * gas/nios2/call.d: New. * gas/nios2/call.s: New. * gas/nios2/cmp.d: New. * gas/nios2/cmp.s: New. * gas/nios2/comments.d: New. * gas/nios2/comments.s: New. * gas/nios2/complex.d: New. * gas/nios2/complex.s: New. * gas/nios2/ctl.d: New. * gas/nios2/ctl.s: New. * gas/nios2/custom.d: New. * gas/nios2/custom.s: New. * gas/nios2/etbt.d: New. * gas/nios2/etbt.s: New. * gas/nios2/flushda.d: New. * gas/nios2/flushda.s: New. * gas/nios2/illegal.l: New. * gas/nios2/illegal.s: New. * gas/nios2/jmp.d: New. * gas/nios2/jmp.s: New. * gas/nios2/ldb.d: New. * gas/nios2/ldb.s: New. * gas/nios2/ldh.d: New. * gas/nios2/ldh.s: New. * gas/nios2/ldw.d: New. * gas/nios2/ldw.s: New. * gas/nios2/lineseparator.d: New. * gas/nios2/lineseparator.s: New. * gas/nios2/mov.d: New. * gas/nios2/movia.d: New. * gas/nios2/movia.s: New. * gas/nios2/movi.d: New. * gas/nios2/movi.s: New. * gas/nios2/mov.s: New. * gas/nios2/mul.d: New. * gas/nios2/mul.s: New. * gas/nios2/nios2.exp: New. * gas/nios2/nor.d: New. * gas/nios2/nor.s: New. * gas/nios2/or.d: New. * gas/nios2/or.s: New. * gas/nios2/ret.d: New. * gas/nios2/ret.s: New. * gas/nios2/rol.d: New. * gas/nios2/rol.s: New. * gas/nios2/rotate.d: New. * gas/nios2/rotate.s: New. * gas/nios2/stb.d: New. * gas/nios2/stb.s: New. * gas/nios2/sth.d: New. * gas/nios2/sth.s: New. * gas/nios2/stw.d: New. * gas/nios2/stw.s: New. * gas/nios2/sub.d: New. * gas/nios2/sub.s: New. * gas/nios2/sync.d: New. * gas/nios2/sync.s: New. * gas/nios2/trap.d: New. * gas/nios2/trap.s: New. * gas/nios2/tret.d: New. * gas/nios2/tret.s: New. * gas/nios2/warn_noat.l: New. * gas/nios2/warn_noat.s: New. * gas/nios2/warn_nobreak.l: New. * gas/nios2/warn_nobreak.s: New. * gas/nios2/xor.d: New. * gas/nios2/xor.s: New. ld/ * Makefile.am (enios2elf.c): New rule. * Makefile.in: Regenerated. * configure.tgt: Add case for nios2*-*-*. * emulparams/nios2elf.sh: New file. * NEWS: Note Altera Nios II support. ld/testsuite/ * ld-nios2/emit-relocs-1a.s: New. * ld-nios2/emit-relocs-1b.s: New. * ld-nios2/emit-relocs-1.d: New. * ld-nios2/emit-relocs-1.ld: New. * ld-nios2/gprel.d: New. * ld-nios2/gprel.s: New. * ld-nios2/hilo16.d: New. * ld-nios2/hilo16.s: New. * ld-nios2/hilo16_symbol.s: New. * ld-nios2/imm5.d: New. * ld-nios2/imm5.s: New. * ld-nios2/imm5_symbol.s: New. * ld-nios2/nios2.exp: New. * ld-nios2/pcrel16.d: New. * ld-nios2/pcrel16_label.s: New. * ld-nios2/pcrel16.s: New. * ld-nios2/relax_callr.d: New. * ld-nios2/relax_callr.ld: New. * ld-nios2/relax_callr.s: New. * ld-nios2/relax_cjmp.d: New. * ld-nios2/relax_cjmp.s: New. * ld-nios2/relax_jmp.ld: New. * ld-nios2/relax_section.d: New. * ld-nios2/relax_section.s: New. * ld-nios2/relax_ujmp.d: New. * ld-nios2/relax_ujmp.s: New. * ld-nios2/reloc.d: New. * ld-nios2/reloc.s: New. * ld-nios2/reloc_symbol.s: New. * ld-nios2/s16.d: New. * ld-nios2/s16.s: New. * ld-nios2/s16_symbol.s: New. * ld-nios2/u16.d: New. * ld-nios2/u16.s: New. * ld-nios2/u16_symbol.s: New. * ld-elf/indirect.exp: Skip on targets that don't support -shared -fPIC. * ld-elfcomm/elfcomm.exp: Build with -G0 for nios2. * ld-plugin/lto.exp: Skip shared library tests on targets that don't support them. Skip execution tests on non-native targets. binutils/ * readelf.c: Include elf/nios2.h. (dump_relocations): Add case for EM_ALTERA_NIOS2. (get_nios2_dynamic_type): New. (get_dynamic_type): Add case for EM_ALTERA_NIOS2. (is_32bit_abs_reloc): Fix EM_ALTERA_NIOS2 case. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Add EM_ALTERA_NIOS2 and EM_NIOS32 cases. * NEWS: Note Altera Nios II support. * MAINTAINERS: Add Nios II maintainers. |
||
|
Alan Modra
|
eeaa4577b6 | Revert 2013-02-04, 2013-01-22 and 2013-01-21 changes. | ||
|
Nick Clifton
|
78c8d46ca4 | Add support for V850E3V5 architecture | ||
Mike Frysinger
|
822b8bf46b |
ld: enable new dtags by default for linux/gnu targets
The "new" dtags options have been around for 14+ years now, so for Linux and GNU targets, enable them by default. Signed-off-by: Mike Frysinger <vapier@gentoo.org> |