The MOPS instructions should be used as a triple, such as:
cpyfp [x0]!, [x1]!, x2!
cpyfm [x0]!, [x1]!, x2!
cpyfe [x0]!, [x1]!, x2!
The registers should also be the same for each writeback operand.
This patch adds a warning for code that doesn't follow this rule,
along similar lines to the warning that we already emit for
invalid uses of MOVPRFX.
include/
* opcode/aarch64.h (C_SCAN_MOPS_P, C_SCAN_MOPS_M, C_SCAN_MOPS_E)
(C_SCAN_MOPS_PME): New macros.
(AARCH64_OPDE_A_SHOULD_FOLLOW_B): New aarch64_operand_error_kind.
(AARCH64_OPDE_EXPECTED_A_AFTER_B): Likewise.
(aarch64_operand_error): Make each data value a union between
an int and a string.
opcodes/
* aarch64-tbl.h (MOPS_CPY_OP1_OP2_INSN): Add scan flags.
(MOPS_SET_OP1_OP2_INSN): Likewise.
* aarch64-opc.c (set_out_of_range_error): Update after change to
aarch64_operand_error.
(set_unaligned_error, set_reg_list_error): Likewise.
(init_insn_sequence): Use a 3-instruction sequence for
MOPS P instructions.
(verify_mops_pme_sequence): New function.
(verify_constraints): Call it.
* aarch64-dis.c (print_verifier_notes): Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
gas/
* config/tc-aarch64.c (operand_mismatch_kind_names): Add entries
for AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
(operand_error_higher_severity_p): Check that
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B
come between AARCH64_OPDE_RECOVERABLE and AARCH64_OPDE_SYNTAX_ERROR;
their relative order is not significant.
(record_operand_error_with_data): Update after change to
aarch64_operand_error.
(output_operand_error_record): Likewise. Handle
AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
* testsuite/gas/aarch64/mops_invalid_2.s,
testsuite/gas/aarch64/mops_invalid_2.d,
testsuite/gas/aarch64/mops_invalid_2.l: New test.
This patch adds support for FEAT_MOPS, an Armv8.8-A extension
that provides memcpy and memset acceleration instructions.
I took the perhaps controversial decision to generate the individual
instruction forms using macros rather than list them out individually.
This becomes useful with a follow-on patch to check that code follows
the correct P/M/E sequence.
[https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en]
include/
* opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro.
(AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS.
(AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd.
(AARCH64_OPND_MOPS_ADDR_Rs): Likewise.
(AARCH64_OPND_MOPS_WB_Rn): Likewise.
opcodes/
* aarch64-asm.h (ins_x0_to_x30): New inserter.
* aarch64-asm.c (aarch64_ins_x0_to_x30): New function.
* aarch64-dis.h (ext_x0_to_x30): New extractor.
* aarch64-dis.c (aarch64_ext_x0_to_x30): New function.
* aarch64-tbl.h (aarch64_feature_mops): New feature set.
(aarch64_feature_mops_memtag): Likewise.
(MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN)
(MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN)
(MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN)
(MOPS_SET_INSN): New macros.
(aarch64_opcode_table): Add MOPS instructions.
(aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
* aarch64-opc.c (aarch64_print_operand): Handle
AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and
AARCH64_OPND_MOPS_WB_Rn.
(verify_three_different_regs): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* doc/c-aarch64.texi: Document +mops.
* config/tc-aarch64.c (parse_x0_to_x30): New function.
(parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
(aarch64_features): Add "mops".
* testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test.
* testsuite/gas/aarch64/mops_invalid.s,
* testsuite/gas/aarch64/mops_invalid.d,
* testsuite/gas/aarch64/mops_invalid.l: Likewise.
This patch adds skeleton support for -march=armv8.8-a, testing only
that it correctly inherits from armv8.7-a.
include/
* opcode/aarch64.h (AARCH64_FEATURE_V8_8): New macro.
(AARCH64_ARCH_V8_8): Likewise.
gas/
* doc/c-aarch64.texi: Document armv8.8-a.
* config/tc-aarch64.c (aarch64_archs): Add armv8-8-a
* testsuite/gas/aarch64/v8-8-a.s,
* testsuite/gas/aarch64/v8-8-a.d: New test.
libopcodes has some code to check constraints across sequences
of consecutive instructions. It was added to support MOVPRFX
sequences but is going to be useful for the Armv8.8-A MOPS
feature as well.
Currently the structure has one field to record the instruction
that started a sequence and another to record the remaining
instructions in the sequence. It's more convenient for the
MOPS code if we put the instructions into a single array instead.
No functional change intended.
include/
* opcode/aarch64.h (aarch64_instr_sequence): Replace num_insns
and current_insns with num_added_insns and num_allocated_insns.
opcodes/
* aarch64-opc.c (add_insn_to_sequence): New function.
(init_insn_sequence): Update for new aarch64_instr_sequence layout.
Add the first instruction to the inst array.
(verify_constraints): Update for new aarch64_instr_sequence layout.
Don't add the last instruction to the array.
This patch is adding new SVE2 instructions added to support SME extension.
The following SVE2 instructions are added by the SME architecture:
* PSEL,
* REVD, SCLAMP and UCLAMP.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_pred_reg_with_index):
New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-9-illegal.d: New test.
* testsuite/gas/aarch64/sme-9-illegal.l: New test.
* testsuite/gas/aarch64/sme-9-illegal.s: New test.
* testsuite/gas/aarch64/sme-9.d: New test.
* testsuite/gas/aarch64/sme-9.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_PnT_Wm_imm.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index):
New inserter.
* aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index):
New extractor.
* aarch64-opc.c (aarch64_print_operand): Printout of
OPND_SME_PnT_Wm_imm.
* aarch64-opc.h (enum aarch64_field_kind): New bitfields
FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl.
* aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier.
(OP_SVE_QMQ): New qualifier.
(struct aarch64_opcode): New instructions PSEL, REVD,
SCLAMP and UCLAMP.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new SME mode selection and state access instructions:
* Add SMSTART and SMSTOP instructions.
* Add SVCR system register.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_sm_za): New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-8-illegal.d: New test.
* testsuite/gas/aarch64/sme-8-illegal.l: New test.
* testsuite/gas/aarch64/sme-8-illegal.s: New test.
* testsuite/gas/aarch64/sme-8.d: New test.
* testsuite/gas/aarch64/sme-8.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_SM_ZA.
(enum aarch64_insn_class): New instruction classes
sme_start and sme_stop.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_pstatefield): New inserter.
(aarch64_ins_sme_sm_za): New inserter.
* aarch64-dis.c (aarch64_ext_imm): New extractor.
(aarch64_ext_pstatefield): New extractor.
(aarch64_ext_sme_sm_za): New extractor.
* aarch64-opc.c (operand_general_constraint_met_p):
New pstatefield value for SME instructions.
(aarch64_print_operand): Printout for OPND_SME_SM_ZA.
(SR_SME): New register SVCR.
* aarch64-opc.h (F_REG_IN_CRM): New register endcoding.
* aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding.
(PSTATE_ENCODE_CRM): Encode CRm field.
(PSTATE_DECODE_CRM): Decode CRm field.
(PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field.
(PSTATE_DECODE_CRM_IMM): Decode CRm immediate field.
(PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate
field.
* aarch64-tbl.h (struct aarch64_opcode): New SMSTART
and SMSTOP instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new loads and stores defined by SME instructions.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_address): New parser.
(parse_sme_za_hv_tiles_operand_with_braces): New parser.
(parse_sme_za_array): New parser.
(output_operand_error_record): Print error details if
present.
(parse_operands): Support new operands.
* testsuite/gas/aarch64/sme-5-illegal.d: New test.
* testsuite/gas/aarch64/sme-5-illegal.l: New test.
* testsuite/gas/aarch64/sme-5-illegal.s: New test.
* testsuite/gas/aarch64/sme-5.d: New test.
* testsuite/gas/aarch64/sme-5.s: New test.
* testsuite/gas/aarch64/sme-6-illegal.d: New test.
* testsuite/gas/aarch64/sme-6-illegal.l: New test.
* testsuite/gas/aarch64/sme-6-illegal.s: New test.
* testsuite/gas/aarch64/sme-6.d: New test.
* testsuite/gas/aarch64/sme-6.s: New test.
* testsuite/gas/aarch64/sme-7-illegal.d: New test.
* testsuite/gas/aarch64/sme-7-illegal.l: New test.
* testsuite/gas/aarch64/sme-7-illegal.s: New test.
* testsuite/gas/aarch64/sme-7.d: New test.
* testsuite/gas/aarch64/sme-7.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands.
(enum aarch64_insn_class): Added sme_ldr and sme_str.
(AARCH64_OPDE_UNTIED_IMMS): New operand error kind.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter.
(aarch64_ins_sme_za_list): New inserter.
(aarch64_ins_sme_za_array): New inserter.
(aarch64_ins_sme_addr_ri_u4xvl): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added
ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor.
(aarch64_ext_sme_za_list): New extractor.
(aarch64_ext_sme_za_array): New extractor.
(aarch64_ext_sme_addr_ri_u4xvl): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added
ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl.
* aarch64-opc.c (operand_general_constraint_met_p):
(aarch64_match_operands_constraint): Handle sme_ldr, sme_str
and sme_misc.
(aarch64_print_operand): New operands supported.
* aarch64-tbl.h (OP_SVE_QUU): New qualifier.
(OP_SVE_QZU): New qualifier.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding ZERO (a list of 64-bit element ZA tiles)
instruction.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_list_of_64bit_tiles):
New parser.
(parse_operands): Handle OPND_SME_list_of_64bit_tiles.
* testsuite/gas/aarch64/sme-4-illegal.d: New test.
* testsuite/gas/aarch64/sme-4-illegal.l: New test.
* testsuite/gas/aarch64/sme-4-illegal.s: New test.
* testsuite/gas/aarch64/sme-4.d: New test.
* testsuite/gas/aarch64/sme-4.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_list_of_64bit_tiles.
opcodes/ChangeLog:
* aarch64-opc.c (print_sme_za_list): New printing function.
(aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles.
* aarch64-opc.h (enum aarch64_field_kind): New bitfield
FLD_SME_zero_mask.
* aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new MOV (alias) and MOVA SME instruction.
gas/ChangeLog:
* config/tc-aarch64.c (enum sme_hv_slice): new enum.
(struct reloc_entry): Added ZAH and ZAV registers.
(parse_sme_immediate): Immediate parser.
(parse_sme_za_hv_tiles_operand): ZA tile parser.
(parse_sme_za_hv_tiles_operand_index): Index parser.
(parse_operands): Added ZA tile parser calls.
(REGNUMS): New macro. Regs with suffix.
(REGSET16S): New macro. 16 regs with suffix.
* testsuite/gas/aarch64/sme-2-illegal.d: New test.
* testsuite/gas/aarch64/sme-2-illegal.l: New test.
* testsuite/gas/aarch64/sme-2-illegal.s: New test.
* testsuite/gas/aarch64/sme-2.d: New test.
* testsuite/gas/aarch64/sme-2.s: New test.
* testsuite/gas/aarch64/sme-2a.d: New test.
* testsuite/gas/aarch64/sme-2a.s: New test.
* testsuite/gas/aarch64/sme-3-illegal.d: New test.
* testsuite/gas/aarch64/sme-3-illegal.l: New test.
* testsuite/gas/aarch64/sme-3-illegal.s: New test.
* testsuite/gas/aarch64/sme-3.d: New test.
* testsuite/gas/aarch64/sme-3.s: New test.
* testsuite/gas/aarch64/sme-3a.d: New test.
* testsuite/gas/aarch64/sme-3a.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New enums
AARCH64_OPND_SME_ZA_HV_idx_src and
AARCH64_OPND_SME_ZA_HV_idx_dest.
(struct aarch64_opnd_info): New ZA tile vector struct.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles):
New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER):
New inserter ins_sme_za_hv_tiles.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles):
New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR):
New extractor ext_sme_za_hv_tiles.
* aarch64-opc.c (aarch64_print_operand):
Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest.
* aarch64-opc.h (enum aarch64_field_kind): New enums
FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv.
(struct aarch64_operand): Increase fields size to 5.
* aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
Patch is adding new SME matrix instructions. Please note additional
instructions will be added in following patches.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_zada_operand):
New parser.
* config/tc-aarch64.c (parse_reg_with_qual):
New reg parser.
* config/tc-aarch64.c (R_ZA): New egister type.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-illegal.d: New test.
* testsuite/gas/aarch64/sme-illegal.l: New test.
* testsuite/gas/aarch64/sme-illegal.s: New test.
* testsuite/gas/aarch64/sme.d: New test.
* testsuite/gas/aarch64/sme.s: New test.
* testsuite/gas/aarch64/sme-f64.d: New test.
* testsuite/gas/aarch64/sme-f64.s: New test.
* testsuite/gas/aarch64/sme-i64.d: New test.
* testsuite/gas/aarch64/sme-i64.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands
AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and
AARCH64_OPND_SME_Pm.
(enum aarch64_insn_class): New instruction class sme_misc.
opcodes/ChangeLog:
* aarch64-opc.c (aarch64_print_operand):
Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands.
(verify_constraints): Handle OPND_SME_Pm.
* aarch64-opc.h (enum aarch64_field_kind):
New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm.
* aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set.
(OP_SME_ZADA_PN_PM_ZN_D): New qualifier.
(OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier.
(OP_SME_ZADA_S_PM_PM_S_S): New qualifier.
(OP_SME_ZADA_D_PM_PM_D_D): New qualifier.
(OP_SME_ZADA_S_PM_PM_H_H): New qualifier.
(OP_SME_ZADA_S_PM_PM_B_B): New qualifier.
(OP_SME_ZADA_D_PM_PM_H_H): New qualifier.
(SME_INSN): New instruction macro.
(SME_F64_INSN): New instruction macro.
(SME_I64_INSN): New instruction macro.
(SME_INSNC): New instruction macro.
(struct aarch64_opcode): New SME instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This series of patches (tagged [SME]) add support for the Scalable
Matrix Extension. Patch introduces new command line options: +sme, +sme-f64 and
+sme-i64 to -march command line options.
gas/ChangeLog:
* NEWS: Updated docs.
* config/tc-aarch64.c: New SME command line options.
* doc/c-aarch64.texi: Update docs.
include/ChangeLog:
* opcode/aarch64.h (AARCH64_FEATURE_SME): New flag.
(AARCH64_FEATURE_SME_F64): New flag.
(AARCH64_FEATURE_SME_I64): New flag.
opcodes/ChangeLog:
* aarch64-tbl.h (SME): New feature object.
Patch is adding new 'armv9-a` command line flag to -march for AArch64.
gas/
* config/tc-aarch64.c: Add 'armv9-a' command line flag.
* docs/c-aarch64.text: Update docs.
* NEWS: Update docs.
include/
* opcode/aarch64.h (AARCH64_FEATURE_V9): New define.
(AARCH64_ARCH_V9): New define.
Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A.
Please note that FLAGM stays a Armv8.4-A feature but now can be
assigned to other architectures or CPUs.
New -march option +flagm is added to enable independently this
feature.
Atomic 64-byte load/store instructions limit Rt register number to
values matching below condition (register <Xt> number must be even
and <= 22):
if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED;
This patch adds check if Rt fulfills above requirement.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Extract PAC (Pointer Authentication) feature from Armv8.3-A.
Please note that PAC stays a Armv8.3-A feature but now can be
assigned to other architectures or CPUs.
This patch:
+ updates RAS feature system registers with new RAS 1.1 regs.
+ extends RAS/RAS 1.1 support for all architecture levels of Armv8-A.
Please note that early Armv8-A architectures do not officially support RAS
extension.
Rationale of the patch:
To ease development so that user-friendly RAS system registers operands can be
used. Certain use cases require developers to enable only more generic
architecture (e.g. -march=armv8-a) during system development. Users must use
RAS extension registers bearing in mind that system they use must support it.
The RAS (Reliability, Availability, Serviceability) extension is a
system-level extension that defines a number of system registers.
RAS 1.1 (FEAT_RASv1p1) introduces five new system registers:
ERXPFGCTL_EL1, ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and
ERXPFGF_EL1.
For details see [0].
[0] https://developer.arm.com/docs/ddi0595/i/
Armv8.7 architecture introduces the "accelerator extension", aka
load/store of 64 bytes. New atomic load/store instructions are: LD64B,
ST64B, ST64BV and ST64BV0.
This patch adds:
+ New feature +ls64 to -march command line.
+ New atomic load/store instructions associated with above feature.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
This patch adds:
+ New feature +csre to -march command line.
+ New instruction CSR PDEC associated with CSRE feature.
Please note that CSRE system registers were already upstreamed. This patch
should finalize CSRE feature implementation.
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of
a Call stack record) instruction. Although this instruction has operand
(PDEC) it's instruction's only operand. PDEC forces instruction field Rt
to be set to 0b1111. This results in fixed opcode of the instruction.
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* config/tc-aarch64.c (parse_csr_operand): New operand parser.
(parse_operands): Call to CSR operand parser.
* testsuite/gas/aarch64/csre_csr-invalid.d: New test.
* testsuite/gas/aarch64/csre_csr-invalid.l: New test.
* testsuite/gas/aarch64/csre_csr-invalid.s: New test.
* testsuite/gas/aarch64/csre_csr.d: New test.
* testsuite/gas/aarch64/csre_csr.s: New test.
include/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature.
(enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out.
* aarch64-tbl.h (CSRE): New CSRE feature handler.
(_CSRE_INSN): New CSRE instruction type.
(struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new variant (nXS) of DSB memory barrier instruction
available in Armv8.7-a. New nXS variant has different encoding in
comparison with pre Armv8.7-a DSB memory barrier variant thus new
instruction and new operand was added.
DSB memory nXS barrier variant specifies the limitation on the barrier
operation. Allowed values are:
DSB SYnXS|#28
DSB ISHnXS|#24
DSB NSHnXS|#20
DSB OSHnXS|#16
Please note that till now, for barriers, barrier operation was encoded in
4-bit unsigned immediate CRm field (in the range 0 to 15).
For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned
assembly instruction immediate, encoded in instruction in two bits CRm<3:2>:
CRm<3:2> #imm
00 16
01 20
10 24
11 28
This patch extends current AArch64 barrier instructions with above mapping.
Notable patch changes include:
+ New DSB memory barrier variant encoding for Armv8.7-a.
+ New operand BARRIER_DSB_NXS for above instruction in order to
distinguish between existing and new DSB instruction flavour.
+ New set of DSB nXS barrier options.
+ New instruction inserter and extractor map between instruction
immediate 5-bit value and 2-bit CRm field of the instruction itself (see
FLD_CRm_dsb_nxs).
+ Regeneration of aarch64-[asm|dis|opc]-2.c files.
+ Test cases to cover new instruction assembling and disassembling.
For more details regarding DSB memory barrier instruction and its
Armv8.7-a flavour please refer to Arm A64 Instruction set documentation
for Armv8-A architecture profile, see document pages 132-133 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (parse_operands): Add
AARCH64_OPND_BARRIER_DSB_NXS handler.
(md_begin): Add content of aarch64_barrier_dsb_nxs_options to
aarch64_barrier_opt_hsh hash.
* testsuite/gas/aarch64/system-4-invalid.d: New test.
* testsuite/gas/aarch64/system-4-invalid.l: New test.
* testsuite/gas/aarch64/system-4-invalid.s: New test.
* testsuite/gas/aarch64/system-4.d: New test.
* testsuite/gas/aarch64/system-4.s: New test.
include/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_BARRIER_DSB_NXS.
(aarch64_barrier_dsb_nxs_options): Declare DSB nXS options.
opcodes/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter
ins_barrier_dsb_nx.
* aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor
ext_barrier_dsb_nx.
* aarch64-opc.c (aarch64_print_operand): New options table
aarch64_barrier_dsb_nxs_options.
* aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs.
* aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier
Armv8.7-a instruction.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds support for AArch64 -march=armv8.7-a command line option
in GAS.
Please note that this change ONLY extends -march= command line interface
with a new "armv8.7-a" option. Architectural changes like new instructions
will be added in following patches.
gas/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (armv8.7-a): New arch.
* doc/c-aarch64.texi (-march=armv8.7-a): Update docs.
include/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_7): New feature bitmask.
(AARCH64_ARCH_V8_7): New arch feature set.
opcodes/ChangeLog:
2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (ARMV8_7): New macro.
This patch adds support for the system registers introduced in Armv8-R
AArch64.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (parse_sys_reg): Also pass sysreg name to
validation function.
(parse_sys_ins_reg): Likewise.
(print_operands): Pass CPU features to aarch64_print_operand().
* testsuite/gas/aarch64/v8-r-bad-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-bad-sysregs.l: Error output.
* testsuite/gas/aarch64/v8-r-bad-sysregs.s: Input.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.l: Error output.
* testsuite/gas/aarch64/v8-r-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs.s: Input for previous two tests.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (aarch64_sys_ins_reg_supported_p): Also take
system register name in order to simplify validation for v8-R.
(aarch64_print_operand): Also take CPU feature set, as disassembly for
system registers now depends on arch variant.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (print_operands): Pass CPU features to
aarch64_print_operand().
* aarch64-opc.c (aarch64_print_operand): Use CPU features to determine
preferred disassembly of system registers.
(SR_RNG): Refactor to use new SR_FEAT2 macro.
(SR_FEAT2): New.
(SR_V8_1_A): New.
(SR_V8_4_A): New.
(SR_V8_A): New.
(SR_V8_R): New.
(SR_EXPAND_ELx): New.
(SR_EXPAND_EL12): New.
(aarch64_sys_regs): Specify which registers are only on
A-profile, add R-profile system registers.
(ENC_BARLAR): New.
(PRBARn_ELx): New.
(PRLARn_ELx): New.
(aarch64_sys_ins_reg_supported_p): Reject EL3 registers for
Armv8-R AArch64.
This patch adds the basic infrastructure needed to support Armv8-R in
AArch64 binutils: new command-line flags, new feature bits, a new BFD
architecture, and support for differentiating between architecture
variants in the disassembler.
The new command-line options added by this patch are -march=armv8-r in
GAS and -m aarch64:armv8-r in objdump.
The disassembler support is necessary since Armv8-R AArch64 introduces a
system register (VSCTLR_EL2) which shares an encoding with a different
system register (TTBR0_EL2) in Armv8-A. This also allows us to use the
correct preferred disassembly for the new DFB alias introduced in
Armv8-R.
bfd/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* archures.c (bfd_mach_aarch64_8R): New.
* bfd-in2.h: Regenerate.
* cpu-aarch64.c (bfd_aarch64_arch_v8_r): New.
(bfd_aarch64_arch_ilp32): Update tail pointer.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add armv8-r.
* doc/c-aarch64.texi: Document -march=armv8-r.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_A): New.
(AARCH64_FEATURE_V8_R): New.
(AARCH64_ARCH_V8): Include new A-profile feature bit.
(AARCH64_ARCH_V8_R): New.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (arch_variant): New.
(determine_disassembling_preference): Disassemble according to
arch variant.
(select_aarch64_variant): New.
(print_insn_aarch64): Set feature set.
This patch fixes an assertion failure on long system register operands
in the AArch64 backend. See the new testcase for an input which
reproduces the issue.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sys_reg): Don't assert when parsing
a long system register.
(parse_sys_ins_reg): Likewise.
(sysreg_hash_insert): New.
(md_begin): Use sysreg_hash_insert() to ensure all system
registers are no longer than the maximum length at startup.
* testsuite/gas/aarch64/invalid-sysreg-assert.d: New test.
* testsuite/gas/aarch64/invalid-sysreg-assert.l: Error output.
* testsuite/gas/aarch64/invalid-sysreg-assert.s: Input.
include/ChangeLog:
* opcode/aarch64.h (AARCH64_MAX_SYSREG_NAME_LEN): New.
Prior to this patch, the information describing the AArch64 system
registers was separate from the information describing which system
registers are available depending on the CPU feature set. Indeed, the
latter was implemented as a separate function from the main table with
the system register information.
This patch remedies this situation and puts the feature information into
the system register table itself.
This has several advantages:
* Having all the information described in one place is easier to
maintain.
* The logic to check whether a system register is supported now becomes
trivial (and much more efficient).
Since this patch ended up touching every line of the system register
table, I took the opportunity to make the formatting more consistent and
remove some redundant comments.
Note that there is still more refactoring that could be done along the
same lines here (e.g. with the TLB instructions) but this seemed like a
reasonable first pass.
Testing:
* Regression tested an x64 -> aarch64-none-elf cross binutils.
* Built aarch64-none-elf cross toolchain, checked newlib startup
code still works.
* Bootstrapped binutils on aarch64-linux-gnu, regression tested.
* Built aarch64 kernel using new binutils with allyesconfig.
OK for master? If so, I'll need a maintainer to commit on my behalf
since I don't have write access.
Thanks,
Alex
---
include/ChangeLog:
2020-06-11 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (aarch64_sys_reg): Add required features to struct
describing system registers.
opcodes/ChangeLog:
2020-06-11 Alex Coplan <alex.coplan@arm.com>
* aarch64-opc.c (SYSREG): New macro for describing system registers.
(SR_CORE): Likewise.
(SR_FEAT): Likewise.
(SR_RNG): Likewise.
(SR_V8_1): Likewise.
(SR_V8_2): Likewise.
(SR_V8_3): Likewise.
(SR_V8_4): Likewise.
(SR_PAN): Likewise.
(SR_RAS): Likewise.
(SR_SSBS): Likewise.
(SR_SVE): Likewise.
(SR_ID_PFR2): Likewise.
(SR_PROFILE): Likewise.
(SR_MEMTAG): Likewise.
(SR_SCXTNUM): Likewise.
(aarch64_sys_regs): Refactor to store feature information in the table.
(aarch64_sys_reg_supported_p): Collapse logic for system registers
that now describe their own features.
(aarch64_pstatefield_supported_p): Likewise.
This, at the assembler level, is just a "brace" feature covering both
AES and SHA2. Hence there's no need for it to have a separate feature
flag, freeing up a bit for future re-use. Along these lines there are
also a number of dead definitions/variables in the opcode table file.
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
This first patch adds the Armv8.6-A flag to binutils.
No instructions are behind it at the moment.
Commited on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (armv8.6-a): New arch.
* doc/c-aarch64.texi (armv8.6-a): Document new arch.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_6): New.
(AARCH64_ARCH_V8_6): New.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h (ARMV8_6): New macro.
Is it ok for trunk?
Regards,
Mihail
I had mistakenly given all variants of the new SVE2 instructions
pmull{t,b} a dependency on the feature +sve2-aes.
Only the variant specifying .Q -> .D sizes should have that
restriction.
This patch fixes that mistake and updates the testsuite to have extra
tests (matching the given set of tests per line in aarch64-tbl.h that
the rest of the SVE2 tests follow).
We also add a line in the documentation of the command line to clarify
how to enable `pmull{t,b}` of this larger size. This is needed because
all other instructions gated under the `sve2-aes` architecture extension
are marked in the instruction documentation by an `HaveSVE2AES` check
while pmull{t,b} is gated under the `HaveSVE2PMULL128` check.
Regtested targeting aarch64-linux.
gas/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests.
* testsuite/gas/aarch64/illegal-sve2.l: Update tests.
* doc/c-aarch64.texi: Add special note of pmull{t,b}
instructions under the sve2-aes architecture extension.
* testsuite/gas/aarch64/illegal-sve2.s: Add small size
pmull{t,b} instructions.
* testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b}
disassembly.
* testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b}
instructions.
include/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): sve_size_013
renamed to sve_size_13.
opcodes/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier.
(OP_SVE_VVV_Q_D): Add new qualifier.
(OP_SVE_VVV_QHD_DBS): Remove now unused qualifier.
(struct aarch64_opcode): Split pmull{t,b} into those requiring
AES and those not.
New operand describes a shift-left immediate encoded in bits
22:20-19:18-16 where UInt(bits) - esize == shift.
This operand is useful for instructions like sshllb.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHLIMM_UNPRED_22
operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHLIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22
operand.
Add sve_size_tsz_bhs iclass needed for sqxtnb and similar instructions.
This iclass encodes one of three variants by the most significant bit
set in a 3-bit value where only one bit may be set.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_tsz_bhs
iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle
sve_size_tsz_bhs iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_size_tsz_bhs iclass decode.
This includes defining a new single bit field SVE_i2h at position 20.
SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded
in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_Zm4_11_INDEX.
(aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX.
(fields): Handle SVE_i2h field.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
This new iclass encodes the variant by which is the most significant bit
used of bits 23-22:20-19, where those bits are usually part of a
given constant operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): Add sve_shift_tsz_bhsd
iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle
sve_shift_tsz_bhsd iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_shift_tsz_bhsd iclass decode.
Include a new iclass to extract the variant from the most significant 3
bits of this operand.
Instructions such as rshrnb include a constant shift amount as an
operand, where the most significant three bits of this operand determine
what size elements the instruction is operating on.
The new SVE_SHRIMM_UNPRED_22 operand denotes this constant encoded in
bits 22:20-19:18-16 while the new sve_shift_tsz_hsd iclass denotes that
the SVE qualifier is encoded in bits 22:20-19.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHRIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHRIMM_UNPRED_22
operand.
(enum aarch64_insn_class): Add sve_shift_tsz_hsd iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-asm.c (aarch64_ins_sve_shrimm):
(aarch64_encode_variant_using_iclass): Handle
sve_shift_tsz_hsd iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_shift_tsz_hsd iclass decode.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHRIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHRIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHRIMM_UNPRED_22
operand.
Add sve_size_013 instruction class
This new iclass handles instructions such as pmullb whose size specifier
can only be encoded as 0, 1, or 3.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_013 iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle
sve_size_013 iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_size_013 iclass decode.
Add new iclass sve_size_bh to handle instructions that have two variants
encoded with the SVE_sz field.
This iclass behaves the same as the sve_size_sd iclass, but it has a
nicer name for those instructions that choose between variants using the
"B" and "H" size qualifiers.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_bh iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle
sve_size_bh iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_size_bh iclass decode.
