mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2025-01-30 12:44:10 +08:00
ecbf5d4f9b
18 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Matthew Malcomson
|
807f647cac |
GDB: aarch64: Add ability to displaced step over a BR/BLR instruction
Enable displaced stepping over a BR/BLR instruction
Displaced stepping over an instruction executes a instruction in a
scratch area and then manually fixes up the PC address to leave
execution where it would have been if the instruction were in its
original location.
The BR instruction does not need modification in order to run correctly
at a different address, but the displaced step fixup method should not
manually adjust the PC since the BR instruction sets that value already.
The BLR instruction should also avoid such a fixup, but must also have
the link register modified to point to just after the original code
location rather than back to the scratch location.
This patch adds the above functionality.
We add this functionality by modifying aarch64_displaced_step_others
rather than by adding a new visitor method to aarch64_insn_visitor.
We choose this since it seems that visitor approach is designed
specifically for PC relative instructions (which must always be modified
when executed in a different location).
It seems that the BR and BLR instructions are more like the RET
instruction which is already handled specially in
aarch64_displaced_step_others.
This also means the gdbserver code to relocate an instruction when
creating a fast tracepoint does not need to be modified, since nothing
special is needed for the BR and BLR instructions there.
Regression tests showed nothing untoward on native aarch64 (though it
took a while for me to get the testcase to account for PIE).
------#####
Original observed (mis)behaviour before was that displaced stepping over
a BR or BLR instruction would not execute the function they called.
Most easily seen by putting a breakpoint with a condition on such an
instruction and a print statement in the functions they called.
When run with the breakpoint enabled the function is not called and
"numargs called" is not printed.
When run with the breakpoint disabled the function is called and the
message is printed.
--- GDB Session
~ [15:57:14] % gdb ../using-blr
Reading symbols from ../using-blr...done.
(gdb) disassemble blr_call_value
Dump of assembler code for function blr_call_value:
...
0x0000000000400560 <+28>: blr x2
...
0x00000000004005b8 <+116>: ret
End of assembler dump.
(gdb) break *0x0000000000400560
Breakpoint 1 at 0x400560: file ../using-blr.c, line 22.
(gdb) condition 1 10 == 0
(gdb) run
Starting program: /home/matmal01/using-blr
[Inferior 1 (process 33279) exited with code 012]
(gdb) disable 1
(gdb) run
Starting program: /home/matmal01/using-blr
numargs called
[Inferior 1 (process 33289) exited with code 012]
(gdb)
Test program:
---- using-blr ----
\#include <stdio.h>
typedef int (foo) (int, int);
typedef void (bar) (int, int);
struct sls_testclass {
foo *x;
bar *y;
int left;
int right;
};
__attribute__ ((noinline))
int blr_call_value (struct sls_testclass x)
{
int retval = x.x(x.left, x.right);
if (retval % 10)
return 100;
return 9;
}
__attribute__ ((noinline))
int blr_call (struct sls_testclass x)
{
x.y(x.left, x.right);
if (x.left % 10)
return 100;
return 9;
}
int
numargs (__attribute__ ((unused)) int left, __attribute__ ((unused)) int right)
{
printf("numargs called\n");
return 10;
}
void
altfunc (__attribute__ ((unused)) int left, __attribute__ ((unused)) int right)
{
printf("altfunc called\n");
}
int main(int argc, char **argv)
{
struct sls_testclass x = { .x = numargs, .y = altfunc, .left = 1, .right = 2 };
if (argc > 2)
{
blr_call (x);
}
else
blr_call_value (x);
return 10;
}
|
||
Simon Marchi
|
c6185dce03 |
gdb: convert aarch64 to new-style debug macros
I haven't tried this on an actual aarch64 machine, but I am able to
exercise it like this:
(gdb) set debug aarch64
(gdb) maintenance selftest aa
Running selftest aarch64-analyze-prologue.
[aarch64] aarch64_analyze_prologue: prologue analysis gave up addr=0x14 opcode=0xf94013e0
Running selftest aarch64-process-record.
Ran 2 unit tests, 0 failed
gdb/ChangeLog:
* arch/aarch64-insn.h (aarch64_debug_printf): New.
* arch/aarch64-insn.c: Use aarch64_debug_printf.
* aarch64-tdep.c: Use aarch64_debug_printf.
Change-Id: Ifdb40e2816ab8e55a9aabb066d1833d9b5a46094
|
||
Joel Brobecker
|
3666a04883 |
Update copyright year range in all GDB files
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
||
Luis Machado
|
5382f97180 |
Fix shifting of negative value
When UBSan is enabled, I noticed runtime errors complaining of shifting of negative numbers. This patch fixes this by reusing existing macros from the ARM port. It also removes unused macros from AArch64's port. gdb/ChangeLog: 2020-12-04 Luis Machado <luis.machado@linaro.org> * aarch64-tdep.c (submask, bit, bits): Remove. * arch/aarch64-insn.c (extract_signed_bitfield): Remove. (aarch64_decode_adr, aarch64_decode_b aarch64_decode_bcond) (aarch64_decode_cb, aarch64_decode_tb) (aarch64_decode_ldr_literal): Use sbits to extract a signed immediate. * arch/aarch64-insn.h (submask, bits, bit, sbits): New macros. |
||
|
Joel Brobecker
|
b811d2c292 |
Update copyright year range in all GDB files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
||
Christian Biesinger
|
491144b5e2 |
Change boolean options to bool instead of int
This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool*. * cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool*. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool*. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*. (get_setshow_command_value_string): Likewise. * cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool*. * compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool*. * python/python.c (gdbpy_parameter_value): Cast to bool* instead of int*. * ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool*. (thread_apply_all_command): Update. (print_thread_events): Change to bool. * top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise. |
||
Tom Tromey
|
1a5c25988e |
Normalize include guards in gdb
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
|
||
|
Joel Brobecker
|
42a4f53d2b |
Update copyright year range in all GDB files.
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files. |
||
|
Joel Brobecker
|
e2882c8578 |
Update copyright year range in all GDB files
gdb/ChangeLog:
Update copyright year range in all GDB files
|
||
|
Joel Brobecker
|
61baf725ec |
update copyright year range in GDB files
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
||
|
Joel Brobecker
|
618f726fcb |
GDB copyright headers update after running GDB's copyright.py script.
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
||
Yao Qi
|
6448a3e4da |
Define enum out of struct
This patch moves the definition of enum out of the scope of struct aarch64_memory_operand, otherwise it breaks GDB build in c++ mode. gdb: 2015-10-14 Yao Qi <yao.qi@linaro.org> * arch/aarch64-insn.h (struct aarch64_memory_operand): Move enum out of it. (enum aarch64_memory_operand_type): New. |
||
|
Yao Qi
|
1c2e1515c4 |
Rename emit_load_store to aarch64_emit_load_store
Likewise, this patch renames emit_load_store to aarch64_emit_load_store. gdb: 2015-10-12 Yao Qi <yao.qi@linaro.org> * arch/aarch64-insn.c (emit_load_store): Rename to ... (aarch64_emit_load_store): ... it. All callers updated. gdb/gdbserver: 2015-10-12 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c: Update all callers as emit_load_store is renamed to aarch64_emit_load_store. |
||
|
Yao Qi
|
e1c587c312 |
Rename emit_insn to aarch64_emit_insn
As emit_insn becomes extern, the prefix "aarch64_" is needed. This patch renames emit_insn to aarch64_emit_insn. gdb: 2015-10-12 Yao Qi <yao.qi@linaro.org> * arch/aarch64-insn.c (emit_insn): Rename to ... (aarch64_emit_insn): ... it. All callers updated. gdb/gdbserver: 2015-10-12 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c: Update all callers of function renaming from emit_insn to aarch64_emit_insn. |
||
|
Yao Qi
|
b6542f81d0 |
Support displaced stepping in aarch64-linux
This patch is to support displaced stepping in aarch64-linux. A
visitor is implemented for displaced stepping, and used to record
information to fixup pc after displaced stepping if needed. Some
emit_* functions are converted to macros, and moved to
arch/aarch64-insn.{c,h} so that they can be shared.
gdb:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c: Include arch-utils.h.
(aarch64_linux_init_abi): Call set_gdbarch_max_insn_length,
set_gdbarch_displaced_step_copy_insn,
set_gdbarch_displaced_step_fixup,
set_gdbarch_displaced_step_free_closure,
set_gdbarch_displaced_step_location,
and set_gdbarch_displaced_step_hw_singlestep.
* aarch64-tdep.c (struct displaced_step_closure): New.
(struct aarch64_displaced_step_data): New.
(aarch64_displaced_step_b): New function.
(aarch64_displaced_step_b_cond): Likewise.
(aarch64_register): Likewise.
(aarch64_displaced_step_cb): Likewise.
(aarch64_displaced_step_tb): Likewise.
(aarch64_displaced_step_adr): Likewise.
(aarch64_displaced_step_ldr_literal): Likewise.
(aarch64_displaced_step_others): Likewise.
(aarch64_displaced_step_copy_insn): Likewise.
(aarch64_displaced_step_fixup): Likewise.
(aarch64_displaced_step_hw_singlestep): Likewise.
* aarch64-tdep.h (DISPLACED_MODIFIED_INSNS): New macro.
(aarch64_displaced_step_copy_insn): Declare.
(aarch64_displaced_step_fixup): Declare.
(aarch64_displaced_step_hw_singlestep): Declare.
* arch/aarch64-insn.c (emit_insn): Moved from
gdbserver/linux-aarch64-low.c.
(emit_load_store): Likewise.
* arch/aarch64-insn.h (enum aarch64_opcodes): Moved from
gdbserver/linux-aarch64-low.c.
(struct aarch64_register): Likewise.
(struct aarch64_memory_operand): Likewise.
(ENCODE): Likewise.
(can_encode_int32): New macro.
(emit_b, emit_bcond, emit_cb, emit_ldr, emit_ldrsw): Likewise.
(emit_tb, emit_nop): Likewise.
(emit_insn): Declare.
(emit_load_store): Declare.
gdb/gdbserver:
2015-10-12 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (enum aarch64_opcodes): Move to
arch/aarch64-insn.h.
(struct aarch64_memory_operand): Likewise.
(ENCODE): Likewise.
(emit_insn): Move to arch/aarch64-insn.c.
(emit_b, emit_bcond, emit_cb, emit_tb): Remove.
(emit_load_store): Move to arch/aarch64-insn.c.
(emit_ldr, emit_ldrb, emit_ldrsw, emit_nop): Remove.
(can_encode_int32): Remove.
|
||
|
Yao Qi
|
246994ce35 |
Move aarch64_relocate_instruction to arch/aarch64-insn.c
This patch moves aarch64_relocate_instruction and visitor class to arch/aarch64-insn.c, so that both GDB and GDBserver can use it. gdb: 2015-10-12 Yao Qi <yao.qi@linaro.org> * arch/aarch64-insn.c (aarch64_decode_ldr_literal): Moved from gdbserver/linux-aarch64-low.c. (aarch64_relocate_instruction): Likewise. * arch/aarch64-insn.h (aarch64_decode_ldr_literal): Declare. (struct aarch64_insn_data): Moved from gdbserver/linux-aarch64-low.c. (struct aarch64_insn_visitor): Likewise. (aarch64_relocate_instruction): Declare. gdb/gdbserver: 2015-10-12 Yao Qi <yao.qi@linaro.org> * linux-aarch64-low.c (extract_signed_bitfield): Remove. (aarch64_decode_ldr_literal): Move to gdb/arch/aarch64-insn.c. (aarch64_relocate_instruction): Likewise. (struct aarch64_insn_data): Move to gdb/arch/aarch64-insn.h. (struct aarch64_insn_visitor): Likewise. |
||
Pierre Langlois
|
6ec5f4be05 |
Make aarch64_decode_adrp handle both ADR and ADRP instructions
We will need to decode both ADR and ADRP instructions in GDBserver. This patch makes common code handle both cases, even if GDB only needs to decode the ADRP instruction. gdb/ChangeLog: * aarch64-tdep.c (aarch64_analyze_prologue): New is_adrp variable. Call aarch64_decode_adr instead of aarch64_decode_adrp. * arch/aarch64-insn.h (aarch64_decode_adrp): Delete. (aarch64_decode_adr): New function declaration. * arch/aarch64-insn.c (aarch64_decode_adrp): Delete. (aarch64_decode_adr): New function, factored out from aarch64_decode_adrp to decode both adr and adrp instructions. |
||
|
Pierre Langlois
|
787749ead6 |
Move instruction decoding into new arch/ directory
This patch moves the following functions into the arch/ common
directory, in new files arch/aarch64-insn.{h,c}. They are prefixed with
'aarch64_':
- aarch64_decode_adrp
- aarch64_decode_b
- aarch64_decode_cb
- aarch64_decode_tb
We will need them to implement fast tracepoints in GDBserver.
For consistency, this patch also adds the 'aarch64_' prefix to static
decoding functions that do not need to be shared right now.
V2:
make sure the formatting issues propagated
fix `gdbserver/configure.srv'.
gdb/ChangeLog:
* Makefile.in (ALL_64_TARGET_OBS): Add aarch64-insn.o.
(HFILES_NO_SRCDIR): Add arch/aarch64-insn.h.
(aarch64-insn.o): New rule.
* configure.tgt (aarch64*-*-elf): Add aarch64-insn.o.
(aarch64*-*-linux*): Likewise.
* arch/aarch64-insn.c: New file.
* arch/aarch64-insn.h: New file.
* aarch64-tdep.c: Include arch/aarch64-insn.h.
(aarch64_debug): Move to arch/aarch64-insn.c. Declare in
arch/aarch64-insn.h.
(decode_add_sub_imm): Rename to ...
(aarch64_decode_add_sub_imm): ... this.
(decode_adrp): Rename to ...
(aarch64_decode_adrp): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_b): Rename to ...
(aarch64_decode_b): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_bcond): Rename to ...
(aarch64_decode_bcond): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_br): Rename to ...
(aarch64_decode_br): ... this.
(decode_cb): Rename to ...
(aarch64_decode_cb): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_eret): Rename to ...
(aarch64_decode_eret): ... this.
(decode_movz): Rename to ...
(aarch64_decode_movz): ... this.
(decode_orr_shifted_register_x): Rename to ...
(aarch64_decode_orr_shifted_register_x): ... this.
(decode_ret): Rename to ...
(aarch64_decode_ret): ... this.
(decode_stp_offset): Rename to ...
(aarch64_decode_stp_offset): ... this.
(decode_stp_offset_wb): Rename to ...
(aarch64_decode_stp_offset_wb): ... this.
(decode_stur): Rename to ...
(aarch64_decode_stur): ... this.
(decode_tb): Rename to ...
(aarch64_decode_tb): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(aarch64_analyze_prologue): Adjust calls to renamed functions.
gdb/gdbserver/ChangeLog:
* Makefile.in (aarch64-insn.o): New rule.
* configure.srv (aarch64*-*-linux*): Add aarch64-insn.o.
|