r_symndx is RELOC_SECTION_NONE for an ALPHA_R_IGNORE reloc.
Change a RELOC_SECTION_LITA symndx to RELOC_SECTION_ABS.
(alpha_ecoff_swap_reloc_out): Change RELOC_SECTION_ABS to
RELOC_SECTION_LITA for ALPHA_R_IGNORE.
(alpha_adjust_reloc_out): For ALPHA_R_IGNORE, don't change
RELOC_SECTION_ABS to RELOC_SECTION_NONE.
* elf.c (make_mapping): New static function.
(map_sections_to_segments): New static function.
(elf_sort_sections): New static function.
(assign_file_positions_for_segments): New static function.
(map_program_segments): Remove.
(get_program_header_size): Remove sorted_hdrs, count, and
maxpagesize parameters. Simplify.
(assign_file_positions_except_relocs): When generating an
executable, use assign_file_positions_for_segments.
(elf_sort_hdrs): Remove.
(_bfd_elf_sizeof_headers): Remove eliminated parameters from call
to get_program_header_size.
if it is not large enough to accomodate the entire TOC area with
signed 16 bit offsets.
(xcoff_write_global_symbol): Handle negative TOC offsets in global
linkage code.
(_bfd_ppc_xcoff_relocate_section): Adjust relocations against a
TOC anchor to use the TOC value used in the output file.
_bfd_print_private_bfd_data from void * to PTR.
* libbfd-in.h (_bfd_generic_bfd_print_private_bfd_data): Cast
using PTR rather than void *.
* bfd-in2, libbfd.h: Rebuild.
* peicode.h (pe_print_private_bfd_data): Change vfile from void *
to PTR.
* elfxx-target.h (bfd_elfNN_bfd_print_private_bfd_data): Define as
_bfd_generic_bfd_print_private_bfd_data rather than casting
bfd_true.
not at the file position of the first section.
* coffcode.h (coff_compute_section_file_positions): Avoid using
unportable #elif.
(coff_write_object_contents): When generating a PPC PE executable
with no symbols, round up the file size to a COFF_PAGE_SIZE
boundary.
* cofflink.c (_bfd_coff_final_link): If there are no symbols,
don't write out a string table.
header, pass the new one to _bfd_elf_make_section_from_shdr.
(elf_fake_sections): Don't set sh_info and sh_entsize fields.
(elf_map_symbols): Add section VMA to symbol value when comparing
against 0.
(_bfd_elf_compute_section_file_positions): Only build symbol table
if there are some symbols. Set file offset of symtab and strtab
sections.
(assign_file_positions_except_relocs): Remove dosyms parameter.
Change all callers. Never set file offset of symtab and strtab
sections.
(_bfd_elf_copy_private_section_data): New function.
(MAP_ONESYMTAB, MAP_DYNSYMTAB, MAP_STRTAB, MAP_SHSTRTAB): Define.
(_bfd_elf_copy_private_symbol_data): New function.
(swap_out_syms): Check for special mapping of st_shndx created by
copy_private_symbol_data.
* elfxx-target.h: Use new copy routines.
* elf-bfd.h (_bfd_elf_copy_private_symbol_data): Declare.
(_bfd_elf_copy_private_section_data): Declare.
* coff-rs6000.c (rs6000coff_vec): Add conditional defines
TARGET_SYM and TARGET_NAME for vector and BFD name.
* coff-pmac.c (pmac_xcoff_vec): Remove.
(TARGET_SYM, TARGET_NAME): Define.
* coffcode.h (coff_set_arch_mach_hook) [POWERMAC]: Set the
machine to 0, not all PowerMacs are 601s.
be represented, report the name via _bfd_error_handler.
(translate_to_native_sym_flags): Likewise.
* elf32-mips.c (mips_elf_final_link): Likewise.
* oasys.c (oasys_write_sections): Likewise.
which checks for STYP_OVRFLO sections.
(coff_compute_section_file_positions): If RS6000COFF_C, handle
reloc and lineno count overflows.
(coff_write_object_contents): Call coff_count_linenumbers before
coff_compute_section_file_positions. If RS6000COFF_C, handle
reloc and lineno count overflows.
* xcofflink.c (_bfd_xcoff_bfd_final_link): Count line numbers and
relocs before dealing with .pad sections. Count overflow section
headers when handling .pad sections.
(struct xcoff_link_hash_table): Add descriptor_section and
special_sections fields.
(_bfd_xcoff_bfd_link_hash_table_create): Initialize new fields.
(xcoff_link_add_symbols): Set linkage section alignment. Create
descriptor section. Check for magic symbol names (_text, etc.),
and record them in special_sections if found. Set
XCOFF_DESCRIPTOR flag for a function descriptor, and set its
descriptor field to point back to the function code symbol.
(xcoff_sweep): Always mark the special descriptor_section.
(bfd_xcoff_export_symbol): Check whether the symbol might be a
function descriptor, and mark it if it is.
(bfd_xcoff_size_dynamic_sections): Add new special_sections
parameter, and fill it in. Allocate space for the descriptor
section.
(xcoff_build_ldsyms): Set XCOFF_DEF_REGULAR flag when defining
global linkage code. If an undefined function descriptor is
exported, arrange to define it. Warn about any other undefined
exported symbol.
(_bfd_xcoff_bfd_final_link): Write out the descriptor section.
(xcoff_write_global_symbol): Create a function descriptor when
necessary.
* bfd-in.h (bfd_xcoff_size_dynamic_sections): Update declaration.
* bfd-in2.h: Rebuild.
and mmep is available.
* acconfig.h: Undef USE_MMAP.
* configure, config.in: Regenerated.
* aoutx.h: If USE_MMAP is not defined, do all symbol and string table handling
the old way.
(aout_get_external_symbols): Don't complain if last byte of string table is
nonzero.
* libbfd.c [HAVE_MADVISE]: Include sys/types.h and sys/mman.h.
(bfd_free_window) [! USE_MMAP]: Don't define.
(bfd_get_file_window, _bfd_generic_get_section_contents_in_window)
[! USE_MMAP]: Abort.
int to boolean; update all callers. Pass MAP_SHARED if not
writable--it's required on Solaris. Cast fprintf argument to
avoid warning.
* bfd-in.h (bfd_get_file_window): Update declaration.
* bfd-in2.h: Rebuild.
* aoutx.h: Update calls to bfd_get_file_window.
Change all uses.
(xcoff_swap_ldhdr_in): New static function.
(xcoff_swap_ldsym_in): New static function.
(xcoff_link_add_symbols): If we just created a descriptor, pass it
to _bfd_generic_link_add_one_symbol, to save a hash lookup.
(xcoff_link_add_dynamic_symbols): Rewrite to read .loader symbols
rather than normal symbol table.
(xcoff_mark): When considering called symbols, check whether the
descriptor is from a dynamic object, rather than the symbol
itself.
(xcoff_build_ldsyms): Likewise.
Cast realloc and malloc return values. If malloc or realloc fail,
set bfd_error_no_memory.
* bfd-in.h (bfd_get_file_window): Change type to boolean.
* bfd-in2.h: Rebuild.
the created .tc section to 2.
(xcoff_mark): Don't keep a .loader reloc for a call to an
undefined symbol when creating a shared library.
(xcoff_build_ldsyms): When creating a shared library, generate
global linkage code for a call to an undefined symbol.
Added some new interfaces, and a new entry in the target vector. Under the new
interfaces, mmap will be used if available, otherwise malloc/seek/read, as
before. Old interfaces all still intact.
Most configurations (including all used by "--enable-targets=all") simply
changed to call the default routine for that entry in the target vector. I
might've missed some targets only included in special configurations.
Support for a.out symbol and string table reading now goes through new
interfaces, and will use mmap when available.
Linker hooks (e.g., avoiding reallocation under malloc) not ready yet.
to o. Clobber and restore the list of new csects around the call
to _bfd_generic_link_add_one_symbol, in case it wants to report a
linker error and the linker wants to read the symbol table. Reset
the line number count of a real section even if it has no relocs.
(_bfd_xcoff_bfd_final_link): If shared, set the DYNAMIC flag.
* coff-m88k.c (rtype2howto): New static function.
(RTYPE2HOWTO): Use it rather than a macro definition.
* coffcode.h (coff_write_object_contents): set internal_a.magic
to PAGEMAGICPEXECPAGED #if defined (M68) && !defined (LYNXOS).
* configure.in: m68*-motorola-sysv3* does not use ptrace-core.o;
define TRAD_HEADER to new file hosts/delta68.h.
m88*-motorola-sysv*, however, does use ptrace-core.o.
* hosts/delta68.h: New file.
* ptrace-core.c (ptrace_unix_core_file_p): change bfd_zmalloc to
bfd_zalloc; provide proper parm abfd to calls to bfd_zalloc.
BFD is not of the right type.
(bfd_elf_get_needed_list): Likewise.
* i386linux.c (bfd_linux_size_dynamic_sections): Likewise.
* sunos.c (bfd_sunos_get_needed_list): Likewise.
* xcofflink.c (XCOFF_XVECP): Define.
(bfd_xcoff_link_record_set): Don't do anything if the BFD is not
of the right type.
(bfd_xcoff_import_symbol): Likewise.
(bfd_xcoff_export_symbol): Likewise.
(bfd_xcoff_link_count_reloc): Likewise.
(bfd_xcoff_record_link_assignment): Likewise.
(bfd_xcoff_size_dynamic_sections): Likewise.
systems that have a system <libelf.h>.
* Makefile.in: Globally replace libelf.h with elf-bfd.h.
* bfd.c, elf.c, elf32-arc.c, elf32-gen.c, elf32-hppa.c,
elf32-hppa.h, elf32-i386.c, elf32-i860.c, elf32-m68k.c,
elf32-m88k.c, elf32-mips.c, elf32-ppc.c, elf32-sparc.c,
elf64-gen.c, elf64-sparc.c, elfcode.h, elflink.c,
elfxx-target.h: Include elf-bfd.h rather than libelf.h.
* elfxx-target.h: Change libelf.h reference to elf-bfd.h.
* ecoff.c (ecoff_set_symbol_info): Add new parameter weak. If
set, set BSF_WEAK in symbol. Change all callers.
(ecoff_get_extr): Set weakext based on BSF_WEAK.
(ecoff_link_add_externals): If weakext is set, pass BSF_WEAK to
_bfd_generic_link_add_one_symbol.
(ecoff_indirect_link_order): Check that the section tdata relocs
are not NULL before using them.
* configure.in (alpha*-*-linux*): Set COREFILE to trad-core.o and
define TRAD_HEADER as hosts/alphalinux.h.
* configure: Rebuild.
* hosts/alphalinux.h: New file.
* trad-core.c (trad_unix_core_file_p): Cast u.u_ar0 to bfd_vma,
not int.
of xcoff_mark.
(xcoff_mark): Call xcoff_mark_symbol.
(bfd_xcoff_export_symbol): Call xcoff_mark_symbol.
(bfd_xcoff_link_count_reloc): Call xcoff_mark_symbol rather than
doing it by hand.
(xcoff_build_ldsyms): Build a .loader symbol for an export symbol.
field.
(xcoff_find_reloc): New static function.
(xcoff_link_add_symbols): Use it.
(_bfd_xcoff_bfd_final_link): Set finfo.line_filepos.
(xcoff_link_input_bfd): Handle C_BINCL and C_EINCL. Don't
relocate the value of C_DECL.
* cofflink.c (_bfd_coff_generic_relocate_section): Make
callback decide what goes in .relocs.
* pe[i]-i386.c (TARGET_UNDERSCORE): Define.
* peicode.h (pe_mkobject_hook): Only copy aouthdr if
there is one.
aoutx.h, gen-aout.c, host-aout.c, hp300bsd.c, i386aout.c
i386bsd.c, i386dynix.c, i386linux.c, i386lynx.c, i386mach3.c,
i386netbsd.c, m68klynx.c, m88kmach3.c, mipsbsd.c, newsos3.c,
ns32knetbsd.c, pc532-mach.c, riscix.c, sparclynx.c, sparcnetbsd.c:
Change PAGE_SIZE to TARGET_PAGE_SIZE.
* m68knetbsd.c: Ditto as well as add support for the m68k4k object
format.
* netbsd.h: Double ditto (incl. m68k4k support). NetBSD's text
segments includes the a.out header. See to that the magic number
*always* is big-endian.
* config.bfd: Add m68*-hp*-netbsd* case. Cross-pollinate m68k and
m68k4k NetBSD configurations.
* configure.in, configure: Separate i386 & mips NetBSD
configurations from other BSD ones. Don't assume DEC is the only
thing NetBSD/mips run on. Add {m68k,ns32k,sparc}-*-netbsd*
configurations. Add support for m68k4k NetBSD object format.
* libaout.h: Added M_68K4K_NETBSD magic.
* hosts/{m68k,sparc}nbsd.h: Don't define HOST_BIG_ENDIAN_P.
* hosts/nbsd.h: Define HOST_BIG_ENDIAN_P according to
<machine/endian.h>.
constructors and a few other special cases.
* coff-rs6000.c (rs6000coff_vec): Set symbol_leading_char back to
zero, reverting yesterday's change.
* bfd-in.h (bfd_xcoff_link_record_set): Declare.
(bfd_xcoff_link_count_reloc): Declare.
(bfd_xcoff_record_link_assignment): Declare.
* bfd-in2.h: Rebuild.
linker.
* libcoff-in.h (struct xcoff_tdata): Add full_aouthdr,
toc_section, and entry_section fields.
(struct xcoff_section_tdata): Remove ldrel_count field.
* libcoff.h: Rebuild.
* coffcode.h (coff_mkobject_hook): Initialize new xcoff_data
fields.
(coff_compute_section_file_positions): If RS6000COFF_C, generate
full a.out header if full_aouthdr is set in xcoff_data.
(coff_write_object_contents): Likewise. Set o_snentry and o_sntoc
based on sections stored in xcoff_data.
* coff-rs6000.c (xcoff_copy_private_bfd_data): Copy new xcoff_data
fields.
* coffgen.c (coff_get_symbol_info): If fix_value is set, fix the
value stored in ret rather than returning a pointer value.
* configure: Rebuild.
* mpw-config.in: Add xcofflink.c.o to powerpc-apple-macos.
* coff-pmac.c: Include coff-rs6000.c instead of duplicating its
contents.
(pmac_xcoff_vec): Update to use new xcoff support.
* coff-rs6000.c (xcoff_generic_stat_arch_elt): Make static.
(xcoff_write_armap): Declare buf as unsigned char.
* xcofflink.c (xcoff_link_add_symbols): Declare a local as PTR.
* mpw-make.sed: Generalize subdir_do edit.
* coff-i386.c (coff_i386_reloc_type_lookup): New.
* coffcode.h (coff_write_object_contents): If .bss is before
.data us that as data_start.
* cofflink.c (_bfd_coff_generic_relocate_section): Get reloc
calc correct.
* peicode.h (add_data_entry): Use _cooked_size of data directory.
(coff_swap_outhdr_out): Hardwire in version number.
now relative to the section, not absolute.
* ecofflink.c (_bfd_ecoff_locate_line): Use the right symbol to
get the file name when there is a N_SO directory name. When
handling stabs, remember that section->vma was added to the
offset.
PR 8223.
* coff-arm.c (in_reloc_p): New.
* coff-i386.c (in_reloc_p): New.
* coffcode.h: Allways include peicode.h if COFF_WITH_PE.
(coff_write_object_contents): Only set has_reloc_section
if PE_IMAGE.
* cofflink.c (_bfd_coff_generic_relocate_section): Call
in_reloc_p to decide if reloc should be emitted.
* libcoff.h (pe_data_type.in_reloc_p): New.
* peicode.h (pe_mkobject): Initialize in_reloc_p.
(coff_slurp_line_table): Warn if we try to set the lineno field of
a symbol twice.
(coff_slurp_symbol_table): If RS6000COFF_C, handle C_BINCL and
C_EINCL by setting fix_line. Fix C_BSTAT symbol value.
* coffgen.c (coff_mangle_symbols): Handle fix_line.
(coff_write_symbol): Only use N_DEBUG if the symbol is in the
absolute section.
(coff_print_symbol): Print fix_value symbols in a useful fashion.
* libcoff.h: Rebuild.
(xcoff_data): Define.
* bfd.c (struct _bfd): Add xcoff_obj_data field to tdata union.
* bfd-in2.h, libcoff.h: Rebuild.
* coff-rs6000.c (xcoff_mkobject): New static function.
(coff_mkobject): Define.
(xcoff_copy_private_bfd_data): New static function.
(coff_bfd_copy_private_bfd_data): Define.
(rs6000coff_howto_table): Change R_TOC complain_on_overflow from
signed to bitfield.
(rs6000coff_vec): Add DYNAMIC to object_flags.
* coffcode.h (sec_to_styp_flags): If RS6000COFF_C, handle .pad and
.loader sections specially.
(coff_new_section_hook): If RS6000COFF_C, get the .text and .data
section alignment from the XCOFF tdata information.
(coff_mkobject_hook): If RS6000COFF_C, set DYNAMIC based on
F_SHROBJ, and copy the extra a.out header information into the
XCOFF tdata structure.
(coff_write_object_contents): If RS6000COFF_C, set F_SHROBJ,
F_DYNLOAD and the extra a.out header information.
(coff_slurp_symbol_table): Set BSF_NOT_AT_END for a C_EXT or
C_HIDEXT symbol with attached csect information.
* coffswap.h (coff_swap_aouthdr_in): If RS6000COFF_C, swap
in the o_maxdata field.
(coff_swap_aouthdr_out): If RS6000COFF_C, swap extra XCOFF fields.
* coffgen.c (coff_renumber_symbols): Don't move any symbol to the
end if BSF_NOT_AT_END is set.
* archive.c (bfd_get_next_mapent): Return BFD_NO_MORE_SYMBOLS when the symbol
table is empty.
* elf32-m68k.c (elf_m68k_size_dynamic_sections): Don't reserve space for
section symbols, since we don't output them either.
(elf_m68k_adjust_dynindx): Removed.
* ptrace-core.c (rawptr): Make it a local variable of ptrace_unix_core_file_p.
* trad-core.c (rawptr): Likewise, for trad_unix_core_file_p.
_bfd_coff_print_aux.
(bfd_coff_print_aux): New static function.
(coff_pointerize_aux_hook (RS6000COFF_C version)): Pointerize the
scnlen field of an XTY_LD csect aux entry.
(coff_print_aux): New static function.
(coff_slurp_symbol_table): Don't pointerize scnlen field; now done
in coff_pointerize_aux_hook.
(bfd_coff_std_swap_table): Initialize new field.
* coffgen.c (coff_print_symbol): Call bfd_coff_print_aux.
* libcoff.h: Rebuild.
* coff-alpha.c (alpha_ecoff_backend_data): Initialize new field.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
_bfd_coff_pointerize_aux_hook.
(coff_pointerize_aux_hook): Define as a function if RS6000COFF_C
or I960, and as 0 otherwise.
(bfd_coff_std_swap_table): Initialize new field.
* libcoff.h: Rebuild.
* coffgen.c (coff_pointerize_aux): Change parameters to take
symbol pointer instead of type and class, and to take aux index.
Call _bfd_coff_pointerize_aux_hook if it is defined.
(coff_get_normalized_symtab): Always call coff_pointerize_aux.
* coff-alpha.c (alpha_ecoff_backend_data): Initialize all fields.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
field.
* ecoff.c (ecoff_sec_to_styp_flags): Check for various Alpha
sections, and set styp correctly for them: .got, .hash, .dynamic,
.liblist, .rel.dyn, .conflic, .dynstr, .dynsym, .comment.
(_bfd_ecoff_styp_to_sec_flags): Check for various Alpha section
types.
(ecoff_sort_hdrs): New static function.
(ecoff_compute_section_file_positions): Return boolean, not void.
Sort the sections by VMA before looking through them. Put the
first non SEC_ALLOC section on a new page. Put every SEC_ALLOC
section on an appropriate boundary within the page.
(ecoff_compute_reloc_file_positions): Check return value of
ecoff_compute_section_file_positions.
(_bfd_ecoff_set_section_contents): Likewise.
(_bfd_ecoff_write_object_contents): Check for various Alpha
section types when incrementing text_size and data_size. Call
adjust_headers backend function if it exists.
* coff-alpha.c (alpha_adjust_headers): New static function.
(alpha_ecoff_backend_data): Initialize adjust_headers field.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
PR 8141.
* aoutx.h (MY_final_link_relocate, MY_relocate_contents): New macros.
(aout_link_input_section_std, aout_link_input_section_ext,
aout_link_reloc_link_order): Call them instead of _bfd_* versions.
* aout-target.h (MY_exec_header_not_counted): New macro, defaults to zero.
(backend_data): Use it instead of hardcoded zero.
* aout-ns32k.c (CTOR_TABLE_RELOC_HOWTO): New macro.
(MY_swap_std_reloc_out): Use udata.i for KEEPIT, don't call stoi.
* ns32knetbsd.c: Include bfd.h.
(MY_text_includes_header, MY_bfd_reloc_type_lookup): New macros.
(MY_bfd_reloc_type_lookup): Declare function too.
* pc532-mach.c (set_sizes): Don't declare.
(MY_text_includes_header, MY_exec_header_not_counted): Define.
(backend_data, MY_backend_data): Don't define.
* config.bfd: Treat ns32k-pc532-ux* like ns32k-pc532-mach*, and ns32k-*-lites*
like ns32k-*-netbsd*.
* hosts/nbsd.h: Swap order of sys/vmparam.h and sys/param.h, to compile on
lites.
* coffcode.h (coff_bfd_copy_private_symbol_data,
coff_bfd_copy_private_section_data,
coff_bfd_copy_private_bfd_data): ifdef to allow overrides.
* peicode.h (coff_bfd_copy_private_bfd_data): New
(pe_bfd_copy_private_bfd_data): New.
(coff_swap_scnhdr_in): Swap bss size into the right place.
(pe_print_private_bfd_data): Add some newlines.
dynamic symbol override a common symbol. Don't change the size or
type if they have been set and the new symbol is not a definition.
Warn if the size or type changes.
symbol strings.
(som_finish_writing): Write them here. Place them after the
subspace data, but before the relocs.
Works around a truely stupid bug in the hpux8/hpux9 linker. Fixes all
known link-time problems with -mlinker-opt.
bfd_link_hash_common to bfd_link_hash_new, since it may be on the
undef list.
(bfd_sunos_record_link_assignment): Don't put __DYNAMIC in the
dynamic symbols when creating a shared library.
(sunos_scan_ext_relocs): Handle relocs correctly when creating a
shared library.
(sunos_scan_dynamic_symbol): Don't mark the __DYNAMIC symbol as
written even if it is not defined in a regular object.
(sunos_write_dynamic_symbol): Use plt_offset for the address of
the jump table reloc. Add an assertion. Use RELOC_JMP_SLOT
rather than the constant 22.
(sunos_check_dynamic_reloc): Handle creating a shared library.
(sunos_finish_dynamic_link): Set the first entry in the GOT to
zero when creating a shared library.
* aoutx.h (NAME(aout,final_link)): If there is a symbol __DYNAMIC,
write it out at the start of the symbol table.
pointers into value field for warning and indirect symbols; just
leave the value field alone.
* linker.c (generic_link_add_symbol_list): Use next symbol for
warning and indirect symbols, rather than looking in symbol value.
* ecoff.c (ecoff_set_symbol_info): Remove indirect_ptr_ptr
parameter. Change all callers. Remove support for indirect
symbols; it didn't work anyhow.
(_bfd_ecoff_slurp_symbol_table): Remove indirect_ptr variable.
* syms.c: Change comments about BSF_WARNING and BSF_INDIRECT.
* bfd-in2.h: Rebuild.
* aoutx.h (NAME(aout,find_nearest_line)): Remove statics buffer
and filename_buffer. Instead, use a malloc buffer stored in the
new line_buf field. Remove length restrictions.
(debug_string_size, debug_string_section): Likewise.
(coff_fix_symbol_name): Add string_size_p, debug_string_section_p,
and debug_string_size_p parameters. Use them instead of the
global variables. Change all callers.
(coff_write_symbol): Likewise.
(coff_write_alien_symbol, coff_write_native_symbol): Likewise.
(coff_write_symbols): Add local variables to replace removed
global variables.
function, and line_base fields.
* libcoff.h: Rebuild.
* coffgen.c (coff_find_nearest_line): Use section tdata to cache
information, rather than using static variables.
size for full core dumps. Copy core file header to private data.
(rs6000coff_core_file_failing_command,
rs6000coff_core_file_failing_signal): New functions to extract
the file name and terminating signal from the core file.
* coff-rs6000.c: Use them.
* archures.c: Reindent many functions. Change CONST to const.
(bfd_arch_info_type): Make arch_name const. Remove disassemble;
nothing set it anyhow. Make next const.
(bfd_arch_info_list): Remove.
(bfd_archures_list): Rename from archures_init_table. Change from
a table of function pointers to a table of bfd_arch_info_type
structure addresses.
(bfd_scan_arch): Rewrite accordingly. Return a const pointer.
(bfd_lookup_arch): Likewise.
(bfd_set_arch_info): Rewrite accordingly. Change argument to be a
const pointer.
(bfd_default_arch_struct): Make const.
(bfd_arch_init, bfd_arch_linkin): Remove.
(bfd_get_arch_info): Return a const pointer.
* init.c (bfd_init): Don't call bfd_arch_init.
* bfd.c (struct _bfd): Make arch_info const.
* bfd-in2.h: Rebuild.
* libbfd.h: Rebuild.
* configure.in: Put & before everything in $selarchs.
* configure: Rebuild.
* cpu-*.c: Change bfd_*_arch from a function which calls
bfd_arch_linkin to a const structure.
* ieee.c (ieee_object_p): Make arch const.
* coff-i960.c (coff_i960_relocate): Use a coff_section_data
structure to store the symbol being used.
(coff_i960_start_final_link): New static function.
(coff_i960_relocate_section): New static function.
(coff_i960_adjust_symndx): New static function.
(coff_start_final_link): Define.
(coff_relocate_section): Define.
(coff_adjust_symndx): Define.
* coffcode.h (bfd_coff_backend_data): Add new callback function
_bfd_coff_start_final_link.
(bfd_coff_start_final_link): Define.
(coff_start_final_link): Define if not defined.
(bfd_coff_std_swap_table): Add coff_start_final_link.
* cofflink.c (_bfd_coff_internal_syment_name): Make globally
visible.
(_bfd_coff_final_link): Call bfd_coff_start_final_link if the
function callback is not NULL.
* libcoff-in.h (struct coff_section_tdata): Add tdata field.
(_bfd_coff_internal_syment_name): Declare.
* libcoff.h: Rebuild.
* configure.in (icoff_big_vec): Add cofflink.o.
(icoff_little_vec): Likewise.
* configure: Rebuild.
* coffcode.h (coff_compute_section_file_positions): Keep the
raw size safe.
(coff_write_object_contents): Remember if it's a relocatable
file.
* libcoff-in.h (pe_data_type): New member 'has_reloc_section'
* peicode.h (coff_swap_filehdr_out): Clear not-reloc flag
if relocatable file. Swap out saved raw size.
broken out of sunos_canonicalize_dynamic_symtab.
(sunos_canonicalize_dynamic_symtab): Call new function
sunos_slurp_dynamic_symtab.
(sunos_add_dynamic_symbols): Add three new parameters. Return the
dynamic symbol table to the caller.
* aoutx.h (aout_link_add_symbols): Permit add_dynamic_symbols
callback to override the symbols being read.
* libaout.h (struct aout_backend_data): Add three new parameters
to add_dynamic_symbols callback.
* Makefile.in (BFD32_BACKENDS): Remove coff-arm.o.
* archures.c (bfd_arch_info_type): Change mach field from long to
unsigned long.
(bfd_lookup_arch): Change machine parameter from long to unsigned
long.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
* configure: Rebuild.
* Makefile.in (stamp-h): Set CONFIG_HEADERS to config.h:config.in
when calling config.status.
HOST_64BIT_LONG. Check that various header files exist. Check
that fcntl exists. Call BFD_BINARY_FOPEN. Check whether malloc
and/or free need to be declared. Don't make a link to sysdep.h.
Define TRAD_HEADER for various hosts.
* configure: Rebuild.
* configure.host: Don't set my_host. Add definitions taken from
host header files for various entries. Remove entries which now
do nothing.
* acconfig.h: New file.
* config.h.in: New file, built by autoheader.
* sysdep.h: New file.
* Makefile.in (do_distclean): Don't remove sysdep.h.
(RECONFIG): Remove.
(LOCAL_H_DEPS): New variable.
($(BFD_LIBS)): Use $(LOCAL_H_DEPS) rather than libbfd.h and
$(RECONFIG).
($(BFD_MACHINES), $(BFD_BACKENDS)): Likewise.
($(OPTIONAL_BACKENDS)): Likewise.
(stmp-bfd.h): Just substitute for BFD_HOST_64BIT_LONG, rather than
looking through sysdep.h.
* bfd-in.h (BFD_HOST_64BIT_LONG): Define; set by Makefile.
(BFD_HOST_64_BIT): Define based on BFD_HOST_64BIT_LONG.
(fprintf_vma, sprintf_vma): Likewise.
(int64_type, uint64_type): Don't define.
* bfd-in2.h: Rebuild.
* archures.c, bfd.c, srec.c: Include <ctype.h>.
* elfcore.h: Check HAVE_SYS_PROCFS_H rather than HAVE_PROCFS.
* lynx-core.c: Include stuff from old hosts/lynx.h.
* opncls.c (bfd_fdopenr): Check HAVE_FNCTL and defined (F_GETFL),
rather than NO_FCNTL.
* targets.c (bfd_target_list): Check HOST_HPPAHPUX and ! __STDC__
rather than NATIVE_HPPAHPUX_COMPILER.
* trad-core.c: Don't include <errno.h>. Include TRAD_HEADER if it
is defined.
* hosts/*.h: Remove all header files which merely include,
declare, and define things. Leave header files which define
information needed by trad-core.c.
shell variables.
* configure.in: Call AC_PROG_CC. Substitute CFLAGS, HDEFINES and
AR. Call AC_PROG_INSTALL. Substitute CC_FOR_BUILD, choosing a
value based on whether the code is being compiled by a cross
compiler. Don't substitute host_makefile_frag or frags.
* aclocal.m4: New file to define local AC_PROG_CC.
* configure: Rebuild.
* Makefile.in (INSTALL): Set to @INSTALL@.
(INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
(INSTALL_DATA): Set to @INSTALL_DATA@.
(AR): Set to @AR@.
(CC): Define as @CC@.
(CFLAGS): Set to @CFLAGS@.
(CC_FOR_BUILD): Set to @CC_FOR_BUILD@.
(@host_makefile_frag@): Remove.
(ALL_CFLAGS): Change $(HDEFINES) to @HDEFINES@. Move $(CFLAGS)
after other options.
(config.status): Remove dependency upon @frags@.
* config/*.mh, config/README: Remove.
fragments by setting shell variables, rather than merely returning
the name of a Makefile fragment.
* configure.in: Use shell variables set by config.bfd rather than
looking at the target Makefile fragment files. Don't substitute
target_makefile_frag. Do substitute TDEFINES.
* configure: Rebuild.
* Makefile.in (@target_makefile_frag@): Remove.
(ALL_CFLAGS): Change $(TDEFINES) to @TDEFINES@.
* config/*.mt: Remove.
* elflink.h (elf_bfd_final_link): Don't change a DT_INIT or
DT_FINI entry if the appropriate symbol is not in the hash table.
* libelf.h (struct elf_backend_data): Add create_program_headers
and want_hdr_in_seg fields.
* elfxx-target.h (elf_backend_want_hdr_in_seg): Define if not
defined.
(elf_backend_create_program_headers): Likewise.
(elfNN_bed): Initialize create_program_headers and
want_hdr_in_seg.
* elf.c (get_program_header_size): Call create_program_headers
backend routine.
(map_program_segments): Check want_hdr_in_seg backend field. Call
create_program_headers backend routine.
* elf.c (assign_file_positions_except_relocs): Align non allocated
sections when creating an executable.
* elfcode.h (elf_swap_phdr_in): Make non static.
(elf_swap_phdr_out): Make non static.
* libelf.h (bfd_elf32_swap_phdr_in): Declare.
(bfd_elf32_swap_phdr_out): Declare.
(bfd_elf64_swap_phdr_in): Declare.
(bfd_elf64_swap_phdr_out): Declare.
warning symbols. If any section is named .gnu.warning.XXX, treat
the contents as a warning to be issued if the symbol XXX is
referenced.
(elf_link_output_extsym): For an indirect or warning symbol, just
output the symbol it points to.
* bfd-in.h (bfd_link_subsystem): Turn enum into #defines.
(bfd_link_pe_info_dval): New
(bfd_link_stack_heap): Renamed and massaged into bfd_link_pe_info.
* bfd-in2.h: rebuilt.
* bfd.c (NT_subsystem, NT_stack_heap): Deleted.
* coffcode.h (pe_value): New function.
(fill_pe_header_info): New function.
(coff_write_object_contents): Use new function.
* cofflink.c (coff_final_link_info): Remove pe randomness.
(dores_com): Update info in bfd_link_pe_info_dval.
(process_embedded_commands): Use the bfd_link_pe_info_dval.
(_bfd_coff_final_link): Remove PE stuff, initialize
coff_data->link_info.
* coffswap.h (coff_swap_[aout|filehdr]_out): Use indirect PE pointer.
(coff_swap_scnhdr_out): Use real imagebase.
* libcoff (coff_data_type.link_info): New field.
undefined weak reference, change the type to undefined.
* elflink.h (elf_link_add_archive_symbols): Don't record an
undefined weak reference as defined, in case it turns into a real
undefined reference later in the same archive.
* sunos.c (SPARC_PLT_PIC_WORD0): Define.
(SPARC_PLT_PIC_WORD1, SPARC_PLT_PIC_WORD2): Define.
(struct sunos_link_hash_entry): Add got_offset and plt_offset
fields.
(struct sunos_link_hash_table): Add dynamic_sections_created and
dynamic_sections_needed fields.
(sunos_link_hash_newfunc): Initialize new fields.
(sunos_link_hash_table_create): Initialize new fields.
(sunos_create_dynamic_sections): New static function, broken out
of sunos_add_dynamic_symbols.
(sunos_add_dynamic_symbols): Call sunos_create_dynamic_sections.
(sunos_add_one_symbol): Call sunos_create_dynamic_sections.
(bfd_sunos_size_dynamic_sections): Call sunos_scan_relocs before
checking whether we need to set up the dynamic link information.
Define __GLOBAL_OFFSET_TABLE if anything referred to it.
(sunos_scan_std_relocs): Call sunos_create_dynamic_sections. Use
plt_offset field; only put symbol in .plt if it is not defined by
a regular object.
(sunos_scan_ext_relocs): Likewise. Handle base relative relocs.
(sunos_scan_dynamic_symbol): Store dynobj in local variable.
(sunos_write_dynamic_symbol): Check plt_offset rather than
checking whether symbol is in .plt section. If symbol is defined
in a regular object file, use SPARC_PLT_PIC_WORD[012], and don't
add a JMP_TBL reloc.
(sunos_check_dynamic_reloc): Add contents and relocationp fields.
If plt_offset is set, redirect relocation to PLT. If this is a
base relative reloc, redirect relocation to GOT. Check
dynamic_sections_needed field rather than whether dynobj is set.
(sunos_finish_dynamic_link): Check dynamic_sections_needed field
rather than whether dynobj is set. Don't die if .need and .rules
sections were not created.
* aoutx.h (howto_table_ext): Mark PC10, PC22, and JMP_TBL entries
PC relative. Mark PC10 complain_overflow_dont. Mark PC22 and
JMP_TBL complain_overflow_signed.
(NAME(aout,final_link)): If info->shared is set, set DYNAMIC.
(aout_link_input_section_std): Call check_dynamic_reloc for all
relocs. Pass contents and &relocation. Don't warn about an
undefined symbol until check_dynamic_reloc has been called. Don't
warn about an undefined symbol for a base relative reloc.
(aout_link_input_section_ext): Likewise. For a base relative
reloc, always treat r_index as an index into the symbol table.
* libaout.h (struct aout_backend_data): Add contents and
relocation argument to check_dynamic_reloc entry point.
(struct aoutdata): Add local_got_offsets field.
definition, add it to the dynamic symbol table if any dynamic
object mentions it. If we do add it, make sure we add the
corresponding real symbol.
(elf_adjust_dynamic_symbol): Adjust a weak defined symbol which we
put in the dynamic symbol table, even if no regular object refers
to it.
* elf32-i386.c (elf_i386_check_relocs): When creating a shared
library, don't allocate space for a PC relative reloc against a
local symbol.
* elf32-m68k.c (elf_m68k_check_relocs): Likewise.
* elf32-sparc.c (elf32_sparc_check_relocs): Likewise.
* elf32-i386.c (elf_i386_adjust_dynamic_symbol): Change assertion
to accept symbol with weakdef set.
* elf32-m68k.c (elf_m68k_adjust_dynamic_symbol): Likewise.
* elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise.
* elf32-m68k.c (elf_m68k_relocate_section): When creating a shared
libary, don't copy over a PC relative reloc against a local
symbol.
* elf32-sparc.c (elf32_sparc_relocate_section): Likewise.
PR 7711.
* cofflink.c (_bfd_coff_generic_relocate_section): Remove most
of special case stuff for PE. Now handled by relocs.
* coff-i386.c (coff_i386_reloc): Special case of PE type 7s.
(howto_table): Type 7 is dir32-rva.
* rs6000-core.c (CORE_DATA_SIZE_FIELD): New macro to get a the size
of a core dump's data section. Provide alternate definition for aix4.
(SAVE_FIELD): Similarly for save state field (register info).
(STACK_END_ADDR): Provide definition suitable for aix4.
* config/{aix4.mh,aix4.mt}: New configuration files.
* hosts/aix4.h: Likewise.
Mike's aix4 changes, slightly modified.
_bfd_coff_get_external_symbols, not coff_link_get_symbols. Call
_bfd_coff_free_symbols, not coff_link_free_symbols. Call
_bfd_coff_read_string_table, not coff_read_string_table.
(coff_link_check_archive_element): Likewise.
(coff_link_input_bfd): Likewise.
(coff_link_get_symbols): Move to coffgen.c.
(coff_read_string_table): Likewise.
(coff_link_free_symbols): Likewise.
(_bfd_coff_internal_syment_name): New static function.
(coff_link_check_ar_symbols): Use _bfd_coff_internal_syment_name.
(coff_link_add_symbols): Likewise.
(coff_link_input_bfd): Likewise.
(_bfd_coff_generic_relocate_section): Likewise.
(_bfd_coff_read_internal_relocs): New function.
(coff_link_input_bfd): Use cached section contents if available.
Use _bfd_coff_read_internal_relocs.
* coffcode.h (coff_slurp_symbol_table): Don't call bfd_seek.
(coff_bfd_get_relocated_section_contents): Only define if not
already defined.
(coff_bfd_relax_section): Likewise.
* coffgen.c (build_string_table): Remove.
(_bfd_coff_get_external_symbols): New function, moved in from old
coff_link_get_symbols in cofflink.c.
(_bfd_coff_read_string_table): New function, moved in from old
coff_read_string_table in cofflink.c.
(_bfd_coff_free_symbols): New function, moved in frmo old
coff_link_free_symbols in cofflink.c.
(coff_get_normalized_symtab): Use _bfd_coff_get_external_symbols
rather than reading the symbols directly. To free them, call
_bfd_coff_free_symbols. Use _bfd_coff_read_string_table rather
than build_string_table.
* libcoff-in.h (obj_coff_keep_syms): Define.
(obj_coff_keep_strings): Define.
(coff_data_type): Add fields keep_syms and keep_strings.
(coff_section_tdata): Define new structure.
(coff_section_data): Define.
(_bfd_coff_get_external_symbols): Declare.
(_bfd_coff_read_string_table): Declare.
(_bfd_coff_free_symbols): Declare.
(_bfd_coff_read_internal_relocs): Declare.
* libcoff.h: Rebuild.
(KEEPITTYPE): Remove.
(NAME(aout,reloc_type_lookup)): Add cases to the
extended reloc type switch: SPARC_GOT10, SPARC_GOT13, SPARC_GOT22,
SPARC_PC10, SPARC_PC22, SPARC_WPLT30.
(NAME(aout,swap_std_reloc_out)): Don't bother to use stoi when
retrieving KEEPIT value.
(NAME(aout,swap_ext_reloc_out)): Likewise. Also, only add in
output section VMA for section symbols, and check BSF_SECTION_SYM
to control whether to set r_extern to 1.
* elflink.h (NAME(bfd_elf,size_dynamic_sections)): If -Bsymbolic,
output a DT_SYMBOLIC dynamic entry.
(elf_adjust_dynamic_symbol): If -Bsymbolic, don't require a PLT
entry for a locally defined symbol.
* elf32-i386.c (elf_i386_relocate_section): If -Bsymbolic, do warn
about undefined symbols, and fill in the GOT entry for a symbol
defined in a regular object file.
(elf_i386_finish_dynamic_symbol): If -Bsymbolic, output a RELATIVE
reloc rather than a GLOB_DAT reloc for a symbol defined in a
regular object file.
* elf32-m68k.c (elf_m68k_relocate_section): If -Bsymbolic, do warn
about undefined symbols, and fill in the GOT entry for a symbol
defined in a regular object file.
(elf_m68k_finish_dynamic_symbol): If -Bsymbolic, output a RELATIVE
reloc rather than a GLOB_DAT reloc for a symbol defined in a
regular object file.
* elf32-sparc.c (elf32_sparc_relocate_section): If -Bsymbolic, do
warn about undefined symbols, and fill in the GOT entry for a
symbol defined in a regular object file.
(elf32_sparc_finish_dynamic_symbol): If -Bsymbolic, output a
RELATIVE reloc rather than a GLOB_DAT reloc for a symbol defined
in a regular object file.
neither BSF_FUNCTION not BSF_NOT_AT_END just before undefined
symbols.
* coffcode.h (coff_slurp_symbol_table): Set BSF_FUNCTION as well
as BSF_NOT_AT_END.
PR 5491.
