Check if AR is usable for LTO build with --enable-pgo-build=lto:
checking for -plugin option... ar: no operation specified
Failed: ar --plugin /usr/gcc-11.0.0-x32/libexec/gcc/x86_64-pc-linux-gnu/11.0.0/liblto_plugin.so rc
no
configure: error: AR with --plugin and rc is required for LTO build
instead of build failure later.
PR binutils/26766
* configure.ac:
* configure: Regenerated.
AR from older binutils doesn't work with --plugin and rc:
[hjl@gnu-cfl-2 bin]$ touch foo.c
[hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
[hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c
./ar: no operation specified
[hjl@gnu-cfl-2 bin]$ ./ar --version
GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112
Copyright (C) 2018 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License version 3 or (at your option) any later version.
This program has absolutely no warranty.
[hjl@gnu-cfl-2 bin]$
Check if AR works with --plugin and rc before passing --plugin to AR and
RANLIB.
PR ld/27173
* configure: Regenerated.
* libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with
--plugin and rc before enabling --plugin.
config/
PR ld/27173
* gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with
--plugin and rc before enabling --plugin.
libiberty/
PR ld/27173
* configure: Regenerated.
zlib/
PR ld/27173
* configure: Regenerated.
These were written with 32-bit host assumptions baked into it.
Simplify the printf formats to use ll length modifier as it's
in C11 rather than trying to manually break it up into two,
and cleanup some of the casts to stop assuming sizeof(long) is
the same as sizeof(int).
We also have to add a few more includes for the various funcs
used in here.
The tests aren't compiled automatically still. We can figure
that out later with more work.
I haven't tried this on an actual aarch64 machine, but I am able to
exercise it like this:
(gdb) set debug aarch64
(gdb) maintenance selftest aa
Running selftest aarch64-analyze-prologue.
[aarch64] aarch64_analyze_prologue: prologue analysis gave up addr=0x14 opcode=0xf94013e0
Running selftest aarch64-process-record.
Ran 2 unit tests, 0 failed
gdb/ChangeLog:
* arch/aarch64-insn.h (aarch64_debug_printf): New.
* arch/aarch64-insn.c: Use aarch64_debug_printf.
* aarch64-tdep.c: Use aarch64_debug_printf.
Change-Id: Ifdb40e2816ab8e55a9aabb066d1833d9b5a46094
This is only compile-tested.
gdb/ChangeLog:
* solib-aix.c (solib_aix_debug_printf): New, use throughout
file.
Change-Id: I7ec4baa15ab5b8ad786212b8b9de61c2c447bac1
On SLE-11 I ran into:
...
(gdb) print $_probe_arg0^M
Cannot access memory at address 0x8000003fe05c^M
(gdb) FAIL: gdb.arch/amd64-stap-special-operands.exp: probe: three_arg: \
print $_probe_arg0
...
The memory cannot be accessed because the address used to evaluate
$_probe_arg0 at the probe point is incorrect.
The address is calculated using this expression:
...
.asciz "-4@-4(%rbp,%ebx,0)"
...
which uses $ebx, but $ebx is uninitialized at the probe point.
The test-case does contain a "movl $0, %ebx" insn to set $ebx to 0, but that
insn is placed after the probe point. We could fix this by moving the insn
to before the probe point. But, $ebx is also a callee-save register, so
normally, if we modify it, we also need to save and restore it, which is
currently not done. This is currently not harmful, because we don't run the
test-case further than the probe point, but it's bound to cause confusion.
So, fix this instead by using $eax instead in the expression, and moving the
insn setting $eax to 0 to before the probe point.
gdb/testsuite/ChangeLog:
2021-01-11 Tom de Vries <tdevries@suse.de>
PR testsuite/26968
* gdb.arch/amd64-stap-three-arg-disp.S: Remove insn modifying $ebx.
Move insn setting $eax to before probe point.
Now that all ports have opted in to this, we can require it in the
core. It guarantees that new ports have them turned on, and defaults
to -Werror in the hopes that new ports keep their code clean from the
start. We do this as a sep commit to make it clear that there are no
changes to existing ports as they've all explicitly called it already.
We want all ports to opt into extra warnings as the default compiler
settings lets a lot slide. Opt all the ports that haven't already in
to the warning system. None of them build with -Werror, so disable
that by default. Hopefully someone finds these important enough to
start fixing at some point.
Make sure config.h is included before C library headers otherwise the
later libiberty.h include gets confused about asprintf state leading
to warnings like:
common/sim-utils.c:330:9:
warning: implicit declaration of function 'vasprintf';
did you mean 'xvasprintf'? [-Wimplicit-function-declaration]
For 32-bit targets, %x happens to work for unsigned_word. But for
64-bit targets, it's too small, and gcc throws an error. Use the
right printf format define for them.
This port declares its pc variable in a header and then includes
it multiple times. This causes linker errors with newer gcc due
to the change in -fno-common behavior. Move the storage to a C
file so we only have one instance of it in the final program.
Since we require C11 now, we can assume many headers exist, and
clean up all of the conditional includes. It's not like any of
this code actually accounted for the headers not existing, just
whether we could include them.
The strings.h cleanup is a little nuanced: it isn't in C11, but
every use of it in the codebase will include strings.h only if
string.h doesn't exist. Since we now assume the C11 string.h
exists, we'll never include strings.h, so we can delete it.
PR 23672 points out a crash in compile_to_object. This crash came in
during a C++-ization. This patch avoids the crash.
The PR also points out another weird behavior in this code, but that
one requires some setup that I don't have here, and it seems to date
back to the introduction of the compile feature. So, it isn't
addressed here. I will leave the PR open so this bug isn't forgotten.
gdb/ChangeLog
2021-01-09 Tom Tromey <tom@tromey.com>
PR compile/23672
* compile/compile.c (compile_to_object): Avoid crash when
osabi_triplet_regexp returns NULL.
The tracepoint code uses print_expression to reconstruct an expression
string. However, the original expression is already available -- it
was just parsed a bit earlier in the same function. This patch
changes this code to simply save the already-parsed expression, rather
than attempt to reconstruct it.
gdb/ChangeLog
2021-01-09 Tom Tromey <tom@tromey.com>
* tracepoint.h (class collection_list) <append_exp>: Take a
std::string.
* tracepoint.c (collection_list::append_exp): Take a std::string.
(encode_actions_1): Update.
Testing of the expression rewrite revealed a buglet in ax.exp. One
test does:
gdb_test "maint agent (unsigned char)1L" ".*ext 8.*"
However, zero extension is not actually needed in this case -- a
simple "const8 1" is also correct here.
This patch changes the test to look for a push of any width of the
constant 1.
gdb/testsuite/ChangeLog
2021-01-09 Tom Tromey <tom@tromey.com>
* gdb.trace/ax.exp: Do not require an "ext".
Add the --enable-pgo-build[=lto] configure option. When binutils+gdb
is not built together with GCC, --enable-pgo-build enables the PGO build:
1. First build with -fprofile-generate.
2. Use "make maybe-check-*" to generate profiling data and pass -i to make
to ignore errors when generating profiling data.
3. Use "make clean" to remove the previous build.
4. Rebuild with -fprofile-use.
With --enable-pgo-build=lto, -flto=jobserver -ffat-lto-objects are used
together with -fprofile-generate and -fprofile-use. Add '+' to the command
line for recursive make to support -flto=jobserver -ffat-lto-objects.
NB: --enable-pgo-build=lto enables the PGO build with LTO while
--enable-lto enables LTO support in toolchain.
PR binutils/26766
* Makefile.tpl (BUILD_CFLAGS): New.
(CFLAGS): Append $(BUILD_CFLAGS).
(CXXFLAGS): Likewise.
(PGO_BUILD_GEN_FLAGS_TO_PASS): New.
(PGO_BUILD_TRAINING_CFLAGS): Likewise.
(PGO_BUILD_TRAINING_CXXFLAGS): Likewise.
(PGO_BUILD_TRAINING_FLAGS_TO_PASS): Likewise.
(PGO_BUILD_TRAINING_MFLAGS): Likewise.
(PGO_BUILD_USE_FLAGS_TO_PASS): Likewise.
(PGO-TRAINING-TARGETS): Likewise.
(PGO_BUILD_TRAINING): Likewise.
(all): Add '+' to the command line for recursive make. Support
the PGO build.
* configure.ac: Add --enable-pgo-build[=lto].
AC_SUBST PGO_BUILD_GEN_CFLAGS, PGO_BUILD_USE_CFLAGS and
PGO_BUILD_LTO_CFLAGS. Enable the PGO build in Makefile.
* Makefile.in: Regenerated.
* configure: Likewise.
These ports declare their State variable in a header and then include
multiple times. This causes linker errors with newer gcc due to the
change in -fno-common behavior. Move the storage to a C file so we
only have one instance of it in the final program.
We've had this off for a long time because the sim code was way too
full of warnings for it to be feasible. However, I've cleaned things
up significantly from when this was first merged, and we can start to
turn this around.
Change the macro to enable -Werror by default, and allow ports to opt
out. New ports will get it automatically (and we can push back on
them if they try to turn it off).
Also turn it off for the few ports that still hit warnings for me.
All the rest will get the new default, and we'll wait for feedback
if/when new issues come up.
Make sure config.h is included before C library headers otherwise the
later libiberty.h include gets confused about asprintf state leading
to warnings like:
common/sim-utils.c:330:9:
warning: implicit declaration of function 'vasprintf';
did you mean 'xvasprintf'? [-Wimplicit-function-declaration]
Newer gcc thinks we might return a pointer to a stack buffer, but
we don't -- we strdup it before returning. Rework the code to just
malloc the buffer from the start and avoid the stack+strdup.
Since LAM_U48 implies LAM_U57, also set LAM_U57 when setting LAM_U48.
bfd/
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Also set
LAM_U57 when setting LAM_U48.
ld/
* ld-x86-64/property-x86-lam-u48-4.d: Updated.
* ld-x86-64/property-x86-lam-u48-5.d: Likewise.
When fixing up SHF_LINK_ORDER, issue a fatal error if the output section
size is increased. Otherwise, bfd_set_section_contents will fail later
when attempting to write contents past the end of the output section.
PR ld/26256
PR ld/27160
* elflink.c (elf_fixup_link_order): Verify that fixing up
SHF_LINK_ORDER doesn't increase the output section size.
POWER10 adds some return-oriented programming (ROP) instructions and
this patch adds support for them. You will notice that they are enabled
for POWER8 and later, not just POWER10 and later. This is on purpose.
This allows the instructions to be added to POWER8 binaries that can be
run on POWER8, POWER9 and POWER10 cpus. On POWER8 and POWER9, these
instructions just act as nop's.
opcodes/
* ppc-opc.c (insert_dw, (extract_dw): New functions.
(DW, (XRC_MASK): Define.
(powerpc_opcodes) <hashchk, hashchkp, hashst, haststp>: New mnemonics.
gas/
* testsuite/gas/ppc/rop-checks.d,
* testsuite/gas/ppc/rop-checks.l,
* testsuite/gas/ppc/rop-checks.s,
* testsuite/gas/ppc/rop.d,
* testsuite/gas/ppc/rop.s: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
commit f478212851 did the regen by hand, missed a change in
ld/configure and didn't update line numbers. Fix that, and an old
regen of ld/Makefile.in with the wrong automake.
bfd/
* configure: Regenerate.
binutils/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* Makefile.in: Regenerate.
* configure: Regenerate.
libctf/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
zlib/
* configure: Regenerate.
With GDB requiring a C++11 compiler now, this hopefully shouldn't
be a big deal. It's been 10 years since C11 came out, so should
be plenty of time to upgrade.
This will allow us to start cleaning up random header logic and
many of our non-standard custom types.
