before testing against reg_ptr.
* eval.c (evaluate_subexp_standard): Cast type of
TYPE_FN_FIELD_VOFFSET to int.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer): Cast type of sizeof to int.
* values.c (unpack_field_as_long, modify_field): Ditto.
* valops.c (value_assign, call_function_by_hand): Ditto.
* infcmd.c (do_registers_info): Ditto.
* ser-tcp.c (tcp_open): Ditto
* remote.c (putpkt): Ditto.
* dcache.c (dcache_peek): Ditto.
* dcache.c (dcache_poke): Ditto.
* m2-exp.y (yylex): Ditto.
* gnu-regex.c (re_match_2): Ditto.
* f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef
out unused macro definition and variables.
* inftarg.c (proc_wait): Move from main.c to here, and make static.
* valprint.c (val_print_string): Change bufsize from int to unsigned.
* main.c (wait.h): Include
* top.c (command_line_input): Remove unused variable "c".
* f-typeprint.c (f_type_print_varspec_prefix): Add missing enum
value TYPE_CODE_TYPEDEF to switch statement.
(f_type_print_varspec_suffix): Add missing enum value
TYPE_CODE_TYPEDEF to switch statement.
* ch-exp.c (parse_primval): Add remaining enumeration values to
switch statement, with no specific action.
(ch_lex): Add LOC_UNRESOLVED in switch statement.
(pushback_token): Ifdef out, since code using it is ifdef'd out.
* stabsread.c (cleanup_undefined_types): Remove unused label
"badtype".
* objfiles.h (print_symbol_bcache_statistics): Add prototype.
* maint.c (objfiles.h): Include.
(maintenance_print_statistics): Remove unused variable "temp".
* minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove
unused variable "found_file_symbol".
* m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch.
* language.c (lang_bool_type): Use existing function local type
variable rather than create block local variables.
* solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS.
* infptrace.c (wait.h, command.h): Include.
* ser-tcp.c (gdb_string.h): Include
* i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR.
(i386_get_frame_setup): Change "pc" from int to CORE_ADDR.
* command.c (complete_on_enum): Make assignment used as truth value
explictly check against NULL.
(wait.h): Include.
* infrun.c (wait_for_inferior): Ifdef out prologue_pc since code
that uses it is ifdef'd out.
* parser-defs.h: Add prototype for write_dollar_variable.
* infrun.c: Add prototype for write_pc_pid.
* breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs.
* symmisc.c (bcache.h): Include.
* bcache.h: Add prototype for print_bcache_statistics.
* symfile.c: Include <time.h>.
* printcmd.c (print_scalar_formatted): Change len to unsigned int.
* valarith.c (value_equal): Cast result of TYPE_LENGTH to int.
* valarith.c (value_binop): Change result_len, promoted_len1,
and promoted_len2 to unsigned int.
* valarith.c (value_subscripted_rvalue): Change elt_offs and
elt_size to unsigned int.
* valops.c (value_array): Change typelength to unsigned int.
(destructor_name_p): Change len to unsigned int.
* scm-lang.h (scm_parse): Add prototype for scm_unpack.
* symfile.c (decrement_reading_symtab): Change return type to void.
* valarith.c (value_subscript): Remove unused variable "word".
(value_subscript): Remove unused variable "tint".
* valops.c (auto_abandon): Ifdef out, since code using it is also
ifdef'd out.
* eval.c (init_array_element): Remove unused variable "val".
* Makefile.in (values.o): Depends on scm-lang.h.
(command.o): Depends upon wait_h.
(ser-tcp.o): Depends upon gdb_string.h.
(infptrace.o): Depends upon wait_h and command_h.
(maint.o): Depends on objfiles.h and symfile.h.
* values.c (allocate_repeat_value): Remove unused variable
"element_type".
(scm-lang.h): Include.
* breakpoint.c (create_longjmp_breakpoint): Enclose in
GET_LONGJMP_TARGET define, unused otherwise.
* config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint,
i386_remove_watchpoint and i386_stopped_by_watchpoint.
* breakpoint.c (breakpoint_re_set_one): Keep temporary
breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy
and bp_step_resume in case breakpoint_re_set_one is called due
to a step over a dlopen call.
* infrun.c (wait_for_inferior): Always remove breakpoints from
inferior in BPSTAT_WHAT_CHECK_SHLIBS case.
assumption that an int can hold a char *.
* bcache.h (struct hashlink): Wrap data[] inside union with
double to force longest alignment.
(BCACHE_DATA): New macro to access data[].
(BCACHE_ALIGNMENT): New macro to get offset to data[].
* bcache.c (lookup_cache, bcache): Use BCACHE_DATA to get
address of cached data. Use BCACHE_ALIGNMENT to compute
amount of space to allocate for each hashlink struct.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
Change CONFIG_HEADERS test in AC_OUTPUT accordingly.
* configure: Rebuild.
* Makefile.in (stamp-h): Depend upon config.in, not config.h.in.
Set CONFIG_HEADERS to config.h:config.in.
The file name config.h.in can be used on DOS filesystems.
we always regenerate the coremaker program. Detect special case
where registers cannot be read from core file. Change setup_xfail
for "print func2:coremaker_local" and "backtrace in corefile.exp"
to fail for all i*86 targets.
* gdb.base/funcargs.c: Patch for SPARCworks alloca compatibility
* gdb.c++/templates.exp: Only match on basename of file since
some formats like xcoff don't encode directory information.
* gdb.stabs/weird.exp: Use the right sed script for powerpc
and rs6000 AIX xcoff targets.
* configure.in: Add stabsdirs to configdirs for powerpc-*-aix*.
* configure: Regenerate.
* gdb.base/Makefile.in (clean): Remove generated file twice-tmp.c
here, rather than in distclean.
defined, and use it to compile the test case with -O2. The
native compilation still uses no optimization.
* gdb.base/mips_pro.c: Remove inline assembly code since
it is compiled PIC by default, which results in assembler
warnings that make the testsuite think the compilation
was unsuccessful.
From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
* configure.in (AC_CHECK_HEADERS): Check for link.h.
* configure: Regenerate with autoconf.
* config.h.in: Regenerate with autoheader.
* config/i386/nm-linux.h: Include solib.h only if HAVE_LINK_H
is defined.
* solib.c: Exclude most of the code if HAVE_LINK_H is not defined.
* config/i386/linux.mh: Reinstate XM_CLIBS, it is needed for
older a.out based systems.
* config.h.in: New file.
* Makefile.in (distclean): Remove config.h and stamp-h during distclean.
(config.h, stamp-h): New targets to remake config.h when necessary.
* configure.in (AC_CONFIG_HEADER): Add, generate config.h.
* configure: Regenerate.
* Makefile.in (defs_h): Add config.h
* defs.h (config.h): Include before any other includes or defines.
* i386-tdep.c (gdb_string.h): Move include after include of defs.h.
breakpoints (y or n) ". Add "mips-dec-ultrix*" to
setup_xfail for deleting all breakpoints test. Fix various
timeout messages to include "(timeout)".
* gdb.base/callfuncs.exp: Add "i*86-*-sysv4*" to setup_xfail
for "p t_float_values2(3.14159,float_val2)".
* gdb.base/funcargs.exp: Remove "mips-sgi-irix4*" setup_xfail
for "continue to call2g" when gcc compiled.
* gdb.base/langs.exp: Remove "i*86-*-sysv4*" setup_xfail for
"up to foo in langs.exp", "show language at foo in langs.exp",
"show language at cppsub_ in langs.exp", "up to fsub in langs.exp",
and "show language at fsub in langs.exp".
* gdb.base/list.exp: Remove "*-*-sysv4*" setup_xfail for
"list line 1 in include file", "list message for lines past EOF",
"list function in include file", "list list0.h:foo", and
"list filename:function; nonexistant function".
* gdb.base/ptype.exp: Change "i*86-*-sysv4*" setup_xfail for
"whatis unnamed typedef'd enum (compiler bug in IBM's xlc)"
and "ptype t_char_array" to be for native cc only.
* monitor.c (monitor_debug): Change remotedebug to buffer strings.
* monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
epecting prompt and echo during open.
* monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to
determine if break should be sent as stop command.
* monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
* i960-tdep.c (mon960_frame_chain_valid): New function for getting
stack frame on mon960.
* Makefile.in: Add mon960 files.
* configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
added i960-nindy-coff* and i960-nindy-elf* for target nindy.
* configure: Regenerated.
* config/i960/mon960.mt, config/i960/tm-mon960.h: New files;
support mon960 rom monitor on i960.
* breakpoint.c (insert_breakpoints): Use ALL_BREAKPOINTS_SAFE.
(bpstat_stop_status): Likewise.
(remove_solib_event_breakpoints): Likewise.
(clear_momentary_breakpoints): Likewise.
(re_enable_breakpoints_in_shlibs): Don't reenable a breakpoint
if we still can't read the memory for that breakpoint.
(mention): Add bp_shlib_event case to keep gcc quiet.
shared library breakpoints that have been temporarily disabled.
* breakpoint.c: Handle temporarily disabled shared library
breakpoints like disabled breakpoints in most places.
(insert_breakpoints): Use shlib_disabled to indicate
that an unsettable breakpoint is only temporarily disabled.
(re_enable_breakpoints_in_shlibs): New function.
* corelow.c (solib_add_stub): After adding shared libraries,
try to reenable any temporarily disabled breakpoints.
* infcmd.c (attach_command): Likewise.
* infrun.c (wait_for_inferior): Likewise.
Hopefully the last 7763 related patches for a while.
* findvar.c (extract_long_unsigned_integer): New function.
* printcmd.c (print_scalar_formatted): Use it.
* valprint.c (val_print_type_code_int): Likewise.
* sh-tdep.c (set processor): New command to set specific
processor type.
(sh_reg_names, sh3_reg_names): Arrays of register names for
SH and SH3 processors.
(sh_set_processor_type): New function.
* sh3-rom.c (sh3_open): Call it.
(sh3_regname): Add names of all the bank registers.
(sh3_supply_register): Clean up formatting.
* config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
bank registers.
(REGISTER_NAMES): Add names of bank registers.
(FP15_REGNUM): Define.
(REGISTER_VIRTUAL_TYPE): Use it.
* monitor.c: Clean up some comments.
(match_string_literal): Handle control sequence.
(match_character_literal): Deto.
* ch-lang.c (chill_printchar): Change formating of nonprintable
characters from C'xx' to ^(num).
(chill_printstr): Deto.
(value_chill_card, value_chill_max_min): New functions to process
Chill's CARD, MAX, MIN.
(evaluate_subexp_chill): Process UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN.
* expression.h (exp_opcode): Add UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN
for Chill's CARD, MAX, MIN.
* valarith.c (value_in): Add processing of TYPE_CODE_RANGE
and change return type from builtin_type_int to
builtin_type_chill_bool.
* infrun.c (wait_for_inferior): Remove breakpoints and
switch terminal settings before calling SOLIB_ADD.
* solib.c (enable_break, SVR4 variant): Don't map in symbols
for the dynamic linker, the namespace pollution causes real
problems.
by SPARCworks cc have a meaningless zero value, do not update
pst->textlow if the function symbol value is zero.
* stabsread.c (define_symbol): Initialize SYMBOL_TYPE field
for function prototype declaration symbols.
(enable_break): For SVR4 systems, first try to use the debugger
interfaces in the dynamic linker to track shared library events
as they happen, then fall back to BKPT_AT_SYMBOL code. Convert
BKPT_AT_SYMBOL code to use shared library event breakpoints.
(solib_create_inferior_hook): Simplify BKPT_AT_SYMBOL code,
it no longer needs to restart/wait on the inferior.
* symfile.c (find_lowest_section): No longer static.
* symfile.h (find_lowest_section): Corresponding changes.
Wraps up 7763 work, simplifies BKPT_AT_SYMBOL code somewhat, and allows
debugging of startup code.
to "alpha-*-osf2*" and add comment.
* gdb.base/a1-selftest.exp (test_with_self): Remove "alpha-dec-osf2*"
setup_xfail for "step over execarg initialization" and
"step over corearg initialization".
* gdb.base/callfuncs.exp (do_function_calls): Restore setup_xfail
for "hppa*-*-*", "sparc-*-*", "mips*-*-*", and "alpha-dec-osf2*".
* gdb.base/corefile.exp: Add "alpha-dec-osf2*" setup_xfail when not
gcc compiled for "print coremaker_bss", "print coremaker_ro",
"print func2::coremaker_local", and "backtrace in corefile.exp".
* gdb.base/signals.exp: Build and source signals.ci.
(test_handle_all_print): Add setup_xfail for "alpha-dec-osf2*".
Change "alpha-dec-osf2*" setup_xfail for "bt in signals.exp"
to be for gcc only.
* lib/gdb.exp: Move verbose statements outside conditionals.
* config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG):
#ifdef'd out definitions --- Causes serious gdb failures on
the i386. Need to investigate further before enabling.
* i386b-nat.c (fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): New functions. These functions are defined
if FETCH_INFERIOR_REGISTERS is set. Registers are fetched/stored
with ptrace PT_GETREGS/PT_SETREGS.
Minor build nit.
* breakpoint.h (remove_solib_event_breakpoints): Declare.
* breakpoint.c (remove_solib_event_breakpoints): New function.
* somsolib.c (solib_create_inferior_hook): Remove all solib event
breakpoints before inserting any new ones. Use a solib event
breakpoint for the breakpoint at "_start".
Remove extraneous "\n" from calls to warning.
Don't leave bogus breakpoints in the breakpoint chain. Simplify
solib_create_inferior_hook and allow for debugging of startup code
(more 7763 related changes).
* breakpoint.c (breakpoint_1): Add missing "sigtramp" to bptypes
name array.
Another minor nit.
alpha coff dynamic symbols for all symbol files. Makes skipping
over the trampoline code work when stepping from a function in a
shared library into a function in a different shared library.
* c-exp.y (%union): Change dval to typed_val_float. Use DOUBLEST
to store actual data. Change types of INT and FLOAT tokens to
typed_val_int and typed_val_float respectively. Create new token
DOUBLE_KEYWORD to specify the string `double'. Make production
for FLOAT use type determined by parse_number. Add production for
"long double" data type.
* (parse_number): Use sscanf to parse numbers as float, double or
long double depending upon the type of typed_val_float.dval. Also
allow user to specify `f' or `l' suffix to explicitly specify
float or long double constants. Change typed_val to
typed_val_int.
* (yylex): Change typed_val to typed_val_int. Also, scan for
"double" keyword.
* coffread.c (decode_base_type): Add support for T_LNGDBL basic
type.
* configure, configure.in: Add check for long double support in
the host compiler.
* defs.h: Define DOUBLEST appropriatly depending on whether
HAVE_LONG_DOUBLE (from autoconf) is defined. Also, fix prototypes
for functions that handle this type.
* expression.h (union exp_element): doubleconst is now type
DOUBLEST.
* m2-exp.y f-exp.y (%union): dval becomes type DOUBLEST.
* findvar.c (extract_floating): Make return value be DOUBLEST.
Also, add support for numbers with size of long double.
* (store_floating): Arg `val' is now type DOUBLEST. Handle all
floating types.
* parser-defs.h parse.c (write_exp_elt_dblcst): Arg expelt is now
DOUBLEST.
* valarith.c (value_binop): Change temp variables v1, v2 and v to
type DOUBLEST. Coerce type of result to long double if either op
was of that type.
* valops.c (value_arg_coerce): If argument type is bigger than
double, coerce to long double.
* (call_function_by_hand): If REG_STRUCT_HAS_ADDR is defined, and
arg type is float and > 8 bytes, then use pointer-to-object
calling conventions.
* valprint.c (print_floating): Arg doub is now type DOUBLEST.
Use appropriate format and precision to print out floating point
values.
* value.h: Fixup prototypes for value_as_double,
value_from_double, and unpack_double to use DOUBLEST.
* values.c (record_latest_value): Remove check for invalid
floats. Allow history to store them so that people may examine
them in hex if they want.
* (value_as_double unpack_double): Change return value to DOUBLEST.
* (value_from_double): Arg `num' is now DOUBLEST.
* (using_struct_return): Use RETURN_VALUE_ON_STACK macro (target
specific) to expect certain types to always be returned on the stack.
* Makefile.in (SFILES): Add bcache.c.
(symtab_h): Add bcache.h.
(HFILES_NO_SRCDIR): add bcache.h
(COMMON_OBJS): Add bcache.o
(bcache.o): New target.
* dbxread.c (start_psymtab): Make global_syms & static_syms
type "partial_symbol **".
* hpread.c (hpread_start_symtab): Ditto.
* os9kread.c (os9k_start_psymtab): Ditto.
* stabsread.h (start_psymtab): Ditto.
* {symfile.c, symfile.h} (start_psymtab_common): Ditto.
* maint.c (maintenance_print_statistics): Call
print_symbol_bcache_statistics.
* objfiles.c (allocate_objfile): Initialize psymbol bcache malloc
and free pointers.
* solib.c (allocate_rt_common_objfile): Ditto.
* symfile.c (reread_symbols): Ditto.
(free_objfile): Free psymbol bcache when objfile is freed.
(objfile_relocate): Use new indirect psymbol pointers.
* objfiles.h (struct objfile): Add psymbol cache.
* symfile.c (compare_psymbols): Now passed pointers to pointers to
psymbols.
(reread_symbols): Free psymbol bcache when freeing other objfile
resources.
(add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new
psymbol using the psymbol bcache.
(init_psymbol_list): Psymbol lists now contain pointers rather than
the actual psymbols.
* symfile.h (psymbol_allocation_list): Psymbol lists now dynamically
grown arrays of pointers.
(ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol
bcache.
* symmisc.c (print_partial_symbols): Now takes pointer to pointer
to partial symbol.
(print_symbol_bcache_statistics): New function to print per objfile
bcache statistics.
(print_partial_symbol, print_partial_symbols,
maintenance_check_symtabs, extend_psymbol_list):
Account for change to pointer to pointer to partial symbol.
* symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2,
make_symbol_completion_list):
Account for change to pointer to pointer to partial symbol.
* symtab.h (bcache.h): Include.
* xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms
type "partial_symbol **".
character is one of the commonly used C++ marker characters.
* defs.h (is_cplus_marker): Add prototype.
* c-typeprint.c (c_type_print_base), ch-lang.c (chill_demangle),
cp-valprint.c (cp_print_class_method), mdebugread.c (parse_symbol),
stabsread.c (define_symbol, read_member_functions, read_struct_fields),
symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P),
values.c (vb_match): Use is_cplus_marker instead of comparison
with CPLUS_MARKER.
