It's a once-off and of no consequence, but fix it anyway. The mmix
caonoicalize_syms array is an array of pointers. Freeing it won't
lose symbol names.
* mmix-dis.c (initialize_mmix_dis_info): Free syms.
Given that the disassembler should never abort when decoding
(potentially random) data, assertion statements in the
`get_*reg_qualifier_from_value' function family prove problematic.
Consider the random 32-bit word W, encoded in a data segment and
encountered on execution of `objdump -D <obj_name>'.
If:
(W & ~opcode_mask) == valid instruction
Then before `print_insn_aarch64_word' has a chance to report the
instruction as potentially undefined, an attempt will be made to have
the qualifiers for the instruction's register operands (if any)
decoded. If the relevant bits do not map onto a valid qualifier for
the matched instruction-like word, an abort will be triggered and the
execution of objdump aborted.
As this scenario is perfectly feasible and, in light of the fact that
objdump must successfully decode all sections of a given object file,
it is not appropriate to assert in this family of functions.
Therefore, we add a new pseudo-qualifier `AARCH64_OPND_QLF_ERR' for
handling invalid qualifier-associated values and re-purpose the
assertion conditions in qualifier-retrieving functions to be the
predicate guarding the returning of the calculated qualifier type.
If the predicate fails, we return this new qualifier and allow the
caller to handle the error as appropriate.
As these functions are called either from within
`aarch64_extract_operand' or `do_special_decoding', both of which are
expected to return non-zero values, it suffices that callers return
zero upon encountering `AARCH64_OPND_QLF_ERR'.
Ar present the error presented in the hypothetical scenario has been
encountered in `get_sreg_qualifier_from_value', but the change is made
to the whole family to keep the interface consistent.
Bug: https://sourceware.org/PR31595
The AArch64 instruction table (aarch64-tbl.h) defines the operand
"SME list of ZA tiles" (SME_list_of_64bit_tiles) as immediate. During
assembly it is correctly encoded as immediate value (imm.value) in
parse_operands. During disassembly it is first correctly decoded as
immediate value (imm.value) in aarch64_ext_imm called by
aarch64_extract_operand, but then erroneously treated as register
number (reg.regno) in aarch64_print_operand.
This resolves the assembler test case "SME extension (ZERO)" to
erroneously fail on s390. On AArch64 - being little-endian - the struct
aarch64_opnd_info union fields reg.regno and imm.value share their
least-significant bits. On s390 - being big-endian - they do not.
opcodes/
PR binutils/31561
* aarch64-opc.c: Treat operand "SME list of ZA tiles" as
immediate.
Bug: https://sourceware.org/PR31561
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Acked-by: Nick Clifton <nickc@redhat.com>
Flag conditional branch relative (extended) mnemonics clij* and clgij*
as "condjump" for jump visualization in disassembly. They were missed
to be flagged as such in commit c5306fed7d ("s390: Support for jump
visualization in disassembly").
opcodes/
* s390-opc.txt: Flag conditional branch relative instructions
clij* and clgij* as condjump for jump visualization in
disassembly.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Acked-by: Nick Clifton <nickc@redhat.com>
This patch fixes the disassembly of vq[r]shr[u]n insns so that the
shift immediate is properly decoded. See the description of the
previous patch for an example of the incorrect disassembly.
As part of this patch we also fix the mve-vqrshrn.d test which was
testing for the incorrect disassembly of the immediates. The
disassembly now matches the assembled instructions in that test.
Finally we add an mve-vqshrn test which tests the non-rounding variants
of those insns, whose encoding we fixed with the previous patch in this
series.
This is intended to have no functional change, but refactors the
condition guarding the call to print_mve_shift_n in arm-dis.c ahead of a
later patch which adds additional insns to the set of those whose
shift immediate is disassembled using print_mve_shift_n.
Support zcmp extension push/pop/popret and popret zero instructions.
The `reg_list' is a list containing 1 to 13 registers, we can use:
"{ra}, {ra, s0}, {ra, s0-s1}, {ra, s0-s2} ... {ra, s0-sN}"
to present this feature.
Passed gcc/binutils regressions of riscv-gnu-toolchain.
Most of work was finished by Sinan Lin.
Co-Authored by: Charlie Keaney <charlie.keaney@embecosm.com>
Co-Authored by: Mary Bennett <mary.bennett@embecosm.com>
Co-Authored by: Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Co-Authored by: Sinan Lin <sinan.lin@linux.alibaba.com>
Co-Authored by: Simon Cook <simon.cook@embecosm.com>
Co-Authored by: Shihua Liao <shihua@iscas.ac.cn>
Co-Authored by: Yulong Shi <yulong@iscas.ac.cn>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subset): Imply zca for zcmp.
(riscv_supported_std_z_ext): Added zcmp with version 1.0.
(riscv_parse_check_conflicts): Zcmp conflicts with d/zcd.
(riscv_multi_subset_supports): Handle zcmp.
(riscv_multi_subset_supports_ext): Ditto.
gas/ChangeLog:
* NEWS: Updated.
* config/tc-riscv.c (regno_to_reg_list): New function, used to map
register to reg_list number.
(reglist_lookup): Called reglist_lookup_internal. Return false if
reg_list number is zero, which is an invalid value.
(reglist_lookup_internal): Parse register list, and return the last
register by regno_to_reg_list.
(validate_riscv_insn): New operators.
(riscv_ip): Ditto.
* testsuite/gas/riscv/march-help.l: Updated.
* testsuite/gas/riscv/zcmp-push-pop-fail.d: New test.
* testsuite/gas/riscv/zcmp-push-pop-fail.l: New test.
* testsuite/gas/riscv/zcmp-push-pop-fail.s: New test.
* testsuite/gas/riscv/zcmp-push-pop.d: New test.
* testsuite/gas/riscv/zcmp-push-pop.s: New test.
include/ChangeLog:
* opcode/riscv-opc.h (MATCH/MASK_CM_PUSH): New macros for zcmp.
(MATCH/MASK_CM_POP): Ditto.
(MATCH/MASK_CM_POPRET): Ditto.
(MATCH/MASK_CM_POPRETZ): Ditto.
(DECLARE_INSN): New declarations for zcmp.
* opcode/riscv.h (EXTRACT/ENCODE/VALID_ZCMP_SPIMM): Handle spimm
operand for zcmp.
(OP_MASK_REG_LIST): Handle operand for zcmp register list.
(OP_SH_REG_LIST): Ditto.
(ZCMP_SP_ALIGNMENT): New argument, used in riscv_get_sp_base.
(X_S0, X_S1, X_S2, X_S10, X_S11): New register numbers.
(enum riscv_insn_class): Added INSN_CLASS_ZCMP.
(extern riscv_get_sp_base): Added.
opcodes/ChangeLog:
* riscv-dis.c (print_reg_list): New function, used to get zcmp
reg_list field.
(riscv_get_spimm): New function, used to get zcmp sp adjustment
immediate.
(print_insn_args): Handle new operands for zcmp.
* riscv-opc.c (riscv_get_sp_base): New function, used by gas and
objdump. Get sp base adjustment.
(riscv_opcodes): Added zcmp instructions.
This patch is based on APX NF patch and also adds test cases for Checking 64-bit insns not sizeable through
register operands with evex.
gas/ChangeLog:
* testsuite/gas/i386/x86-64-apx-evex-promoted-intel.d: Added no-egpr testcases for movbe.
* testsuite/gas/i386/x86-64-apx-evex-promoted-wig.d: Ditto.
* testsuite/gas/i386/x86-64-apx-evex-promoted.d: Ditto.
* testsuite/gas/i386/x86-64-apx-evex-promoted.s: Ditto.
* testsuite/gas/i386/x86-64.exp: Added tests.
* testsuite/gas/i386/noreg64-evex.d: New test.
* testsuite/gas/i386/noreg64-evex.e: Ditto.
* testsuite/gas/i386/noreg64-evex.s: Ditto.
* testsuite/gas/i386/x86-64-apx_f-evex.d: Ditto.
* testsuite/gas/i386/x86-64-apx_f-evex.s: Ditto.
opcodes/ChangeLog:
* i386-dis-evex.h: Added %ME to movbe.
* i386-dis.c : Added %XE to evex_from_vex instructions to output {evex}.
(struct dis386): New %ME.
(putop): Handle %ME and output {evex} for evex_from_legacy instructions.
* Return early when the instruction name is (bad).
For the case when NDD and NF are both 0 in evex-promoted format,
we will fully support and test it in another patch.
gas/ChangeLog:
* NEWS: Support Intel APX NF.
* config/tc-i386.c (enum i386_error): Add unsupported_nf.
(struct _i386_insn): Add has_nf.
(is_apx_evex_encoding): Ditto.
(build_apx_evex_prefix): Encode the NF bit.
(md_assemble): Handle unsupported_nf.
(parse_insn): Handle Prefix_NF and report bad for illegal combination.
(can_convert_NDD_to_legacy): Replace i.tm.opcode_modifier.nf with i.has_nf.
(match_template): Support D for APX_F insns and check NF support.
* testsuite/gas/i386/x86-64-apx-evex-promoted-bad.d: Add bad test for NF bit.
* testsuite/gas/i386/x86-64-apx-evex-promoted-bad.s: Ditto.
* testsuite/gas/i386/x86-64-apx-inval.l: Ditto.
* testsuite/gas/i386/x86-64-apx-inval.s: Ditto.
* testsuite/gas/i386/x86-64.exp: Add apx nf tests.
* testsuite/gas/i386/x86-64-apx-nf-intel.d: New test.
* testsuite/gas/i386/x86-64-apx-nf.d: Ditto.
* testsuite/gas/i386/x86-64-apx-nf.s: Ditto.
opcodes/ChangeLog:
* i386-dis-evex.h: Add %NF to the instructions that support APX NF and
add new instruction imul, popcnt, tzcnt and lzcnt to EVEX table.
* i386-dis-evex-reg.h: Ditto.
* i386-dis.c (struct instr_info): Add nf.
(struct dis386): Add "NF" for EVEX.NF.
(get_valid_dis386): Set ins->vex.nf and report bad-nf for illegal case.
(print_insn): Handle ins.vex.nf.
(putop): Handle "%NF".
* i386-opc.h (Prefix_NF): New.
* i386-opc.tbl: Added new entries to support full APX NF instructions.
* i386-mnem.h: Regenerated.
* i386-tbl.h: Regenerated.
For some reason, these targets are missing although others from the
same family are present. This looks like an oversight.
This enables calling 'make install-dvi' from the top-level build
directory.
Make sure that field actually matches the specified operands. Don't
follow existing F_PSEUDO checking in using assertions, though. Print
meaningful error messages, thus - while not having a line number
available - at least providing some indication of where things are
wrong.
Fix SVE2.1's extq accordingly, but don't extend the testsuite there:
There are further issues with its operands (SVE_Zm_imm4 doesn't look to
be correct to use there, as that describes an indexed vector register,
while here a separate vector register and immediate operand are to be
specified).
Like for WRUSSQ it's not needed here. The legacy insn had gained it in
the course of zapping Rex64, but that attribute wasn't needed here
either. The APX insn then simply gained it by copy-and-paste, I suppose.
With the multitude of new APX templates, it finally becomes desirable to
further remove redundancy by also templatizing basic arithmetic insns.
Continue with the shift-double ones.
While there also drop the APX form with ShiftCount omitted. Other shift
and rotate insns were deliberately left without this form as well. Note
that there's also no testsuite adjustment needed for this, indicating
that the form wasn't tested either.
With the multitude of new APX templates, it finally becomes desirable to
further remove redundancy by also templatizing basic arithmetic insns.
Continue with the "ordinary" shift and rotate ones.
While there also drop the APX form of RCL/RCR with Imm1 omitted. Other
shift insns as well as ROR/ROL were deliberately left without this form
as well. Note that there's also no testsuite adjustment needed for this,
indicating that the form wasn't tested either.
Furthermore since RCL/RCR already had non-NDD APX forms, those end up
being added for the other 6 mnemonics, too.
With the multitude of new APX templates, it finally becomes desirable to
further remove redundancy by also templatizing basic arithmetic insns.
Continue with a the more complex binary (two source) cases.
Note how this adds a missing CheckOperandSize to one of the APX sub
forms.
Furthermore since SBB already had a non-NDD APX form, one ends up
being added for the other 6 mnemonics, too.
With the multitude of new APX templates, it finally becomes desirable to
further remove redundancy by also templatizing basic arithmetic insns.
Continue with a few simple unary (single source) cases.
With the multitude of new APX templates, it finally becomes desirable to
further remove redundancy by also templatizing basic arithmetic insns.
Start with the simplest case, accompanied by a necessary adjustment to
i386-gen (such that template uses can also be at the start of a line).
While there also drop a bogus (meaningless / unreachable) "break" as
well as a unused variable (which I'm surprised compilers didn't warn
about).
The following instructions are added in this patch:
- ADDPT (predicated): Add checked pointer vectors (predicated).
- ADDPT (unpredicated): Add checked pointer vectors (unpredicated).
- SUBPT (predicated): Subtract checked pointer vectors (predicated).
- SUBPT (unpredicated): Subtract checked pointer vectors (unpredicated).
- MADPT: Multiply-add checked pointer vectors, writing multiplicand
- MLAPT: Multiply-add checked pointer vectors, writing addend
These instructions are part of Checked Pointer Arithmetic extension
and are enabled when both CPA and SVE are enabled. To achieve this,
both flag "+sve" and "+cpa" should be active.
This patch adds assembler and disassembler support for these instructions
with relevant checks. Tests are included as well.
Regression tested on the aarch64-none-linux-gnu target and no regressions
have been found.
The following instructions are added in this patch:
- ADDPT and SUBPT - Add/Subtract checked pointer
- MADDPT and MSUBPT - Multiply Add/Subtract checked pointer
These instructions are part of Checked Pointer Arithmetic extension.
This patch adds assembler and disassembler support for these instructions
with relevant checks. Tests are included as well.
A new flag "+cpa" added to documentation. This flag enables CPA extension.
Regression tested on the aarch64-none-linux-gnu target and no regressions
have been found.
Except for bfml{a,s} their 1st and 3rd operands need to match - pass
the TIED macro argument accordingly. While doing that also slightly
re-arrange table entries, such that all predicated insns are close
together.
At the same time change the existing test source to actually use non-
matching operands for the respective bfml{a,s} forms.
Their index is in bits 19, 20, and 22. Bit 11 in particular is already
set in the base opcode. Note also how disassembler output didn't match
assembler input in the respective testcase.
Irrespective of the encoding being EVEX, the usable SIMD register range
continues to be limited to %xmm0-%xmm15. Enforce this in gas (but
continue to generate code, as in principle we know how to encode
things) and recognize/flag the case in the disassembler.
Oddly enough wrong forms were actually used in the testsuite (register-
only forms are then really meaningless to test here, and are hence
dropped instead of adjusted).
Convert the POP2 test that needs touching anyway (due to a bad ModR/M
byte having been chosen) to .insn.
Base and index register 0 have no effect in address computation:
"A value of zero in the B [base] or X [index] field specifies that no
base or index is to be applied, and, thus, general register 0 cannot be
designated as containing a base address or index."
IBM z/Architecture Principles of Operation [1], chapter "Organization",
section "General Registers".
Index register 0 is omitted in the s390 disassembly. Base register 0 is
omitted in D(B), D(L,B) and D(X,B) - the latter only if the index
register is zero.
To make it more apparent print base register 0 as "0" instead of "%r0",
whenever it would still be printed in the disassembly.
[1]: IBM z/Architecture Principles of Operation, SA22-7832-13,
https://publibfp.dhe.ibm.com/epubs/pdf/a227832d.pdf
opcodes/
* s390-dis.c: Print base register 0 as "0" in disassembly.
binutils/
* NEWS: Mention base register 0 now being printed as "0" in s390
disassembly.
gas/
* testsuite/gas/s390/zarch-base-index-0.d: Update test case
output verification patterns to accept "0" as base base
register due to disassembler output format change.
* gas/testsuite/gas/s390/zarch-omitted-base-index.d: Likewise.
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Print a warning message when the register type of a specified register
name does not match with the operand's register type:
operand {#}: expected {access|control|floating-point|general|vector}
register name [as {base|index} register]
Introduce a s390-specific assembler option "warn-regtype-mismatch"
with the values "strict", "relaxed", and "no" as well as an option
"no-warn-regtype-mismatch" which control whether the assembler
performs register name type checks and generates above warning messages.
warn-regtype-mismatch=strict:
Perform strict register name type checks.
warn-regtype-mismatch=relaxed:
Perform relaxed register name type checks, which allow floating-point
register (FPR) names %f0 to %f15 to be specified as argument to vector
register (VR) operands and vector register (VR) names %v0 to %v15 to
be specified as argument to floating-point register (FPR) operands.
This is acceptable as the FPRs are embedded into the lower halves of
the VRs. Make "relaxed" the default, as GCC generates assembler code
using FPR and VR interchangeably, which would cause assembler warnings
to be generated with "strict".
warn-regtype-mismatch=no:
no-warn-regtype-mismatch:
Disable any register name type checks.
Tag .insn pseudo mnemonics as such, to skip register name type checks
on those. They need to be skipped, as there do not exist .insn pseudo
mnemonics for every possible operand register type combination. Keep
track of the currently parsed operand number to provide it as reference
in warning messages.
To verify that the introduction of this change does not unnecessarily
affect the compilation of existing code the GNU Binutils, GNU C Library,
and Linux Kernel have been build with the new assembler, verifying that
the assembler did not generate any of the new warning messages.
gas/
* config/tc-s390.c: Handle new assembler options
"[no]warn-regtype-mismatch[=strict|relaxed|no". Annotate
parsed register expressions with register type. Keep track of
operand number being parsed. Print warning message in case of
register type mismatch between instruction operand and parsed
register expression.
* doc/as.texi: Document new s390-specific assembler options
"[no-]warn-regtype-mismatch[=strict|relaxed|no]".
* NEWS: Mention new s390-specific register name type checks and
related assembler option "warn-regtype-mismatch=strict|
relaxed|no".
* testsuite/gas/s390/s390.exp: Add test cases for new assembler
option "warn-regtype-mismatch={strict|relaxed}".
* testsuite/gas/s390/esa-g5.s: Fix register types in tests for
didbr, diebr, tbdr, and tbedr.
* testsuite/gas/s390/zarch-z13.s: Fix register types in tests
for vgef, vgeg, vscef, and vsceg.
* testsuite/gas/s390/zarch-warn-regtype-mismatch-strict.s:
Tests for assembler option "warn-regtype-mismatch=strict".
* testsuite/gas/s390/zarch-warn-regtype-mismatch-strict.l:
Likewise.
* gas/testsuite/gas/s390/zarch-warn-regtype-mismatch-relaxed.s:
Tests for assembler option "warn-regtype-mismatch=relaxed".
* gas/testsuite/gas/s390/zarch-warn-regtype-mismatch-relaxed.l:
Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index-err.s: Update
test cases for assembler option "warn-regtype-mismatch"
defaulting to "relaxed".
* testsuite/gas/s390/zarch-omitted-base-index-err.l: Likewise.
include/
* opcode/s390.h (S390_INSTR_FLAG_PSEUDO_MNEMONIC): Add
instruction flag to tag .insn pseudo-mnemonics.
opcodes/
* s390-opc.c (s390_opformats): Tag .insn pseudo-mnemonics as
such.
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
While at it add comments to logic to omit base and/or index register 0
in s390 disassembly.
opcodes/
* s390-dis.c: Add comments related to omitting base and/or index
register 0 in disassembly.
gas/
* testsuite/gas/s390/s390.exp: Add test cases for base and/or
index register 0.
* testsuite/gas/s390/zarch-base-index-0.s: Add test cases for
base and/or index register 0.
* testsuite/gas/s390/zarch-base-index-0.d: Likewise.
* testsuite/gas/s390/zarch-base-index-0-err.s: Add error test
cases for base and/or index register 0.
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
opcodes/
* s390-mkopc.c: Use proper string lengths when parsing opcode
table flags.
Fixes: c5306fed7d ("s390: Support for jump visualization in disassembly")
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
While most logic in optimize_encoding() is already covering APX by way
of the earlier NDD->REX2 conversion, there's a remaining set of cases
which wants handling separately.
gas/
* tc-riscv.c (percent_op_*): Add support for %tlsdesc_hi,
%tlsdesc_load_lo, %tlsdesc_add_lo and %tlsdesc_call. percent_op_rtype
renamed to percent_op_relax_only as this matcher is extended to handle
jalr as well which is not R-type.
(riscv_ip): Apply the percent_op_relax_only rename and update comment.
(md_apply_fix): Add TLSDESC_* to relaxable list. Add TLSDESC_HI20 to
TLS relocation check list.
* testsuite/gas/riscv/tlsdesc.*: New test cases for TLSDESC relocation
generation.
opcodes/
* riscv-opc.c (riscv_opcodes): Add a new syntax for jalr with
%tlsdesc_call annotations.
Hi,
Commits af1bd77 and 3f4ff08 introduced the Pointer Authentication feature with internal names that don't match the actual feature name pauth. The new feature PAuth_LR introduced in Armv9.5-A is an extension of the PAuth feature of Armv8.3-A. Using a different naming for it not based on the formerly "PAC" would create confusion.
Regression tested on aarch64-none-elf, and no regression found.
Ok for binutils-master? I don't have commit access so I need someone to commit on my behalf.
Regards,
Matthieu.
From 58b38358b2788939d81f2df7f5fb4c64a31ae06e Mon Sep 17 00:00:00 2001
From: Matthieu Longo <matthieu.longo@arm.com>
Date: Fri, 23 Feb 2024 11:30:40 +0000
Subject: [PATCH] aarch64: rename internals related to PAuth feature to use
pauth in their naming for coherency
Commits af1bd77 and 3f4ff08 introduced the Pointer Authentication feature
with internal names that don't match the actual feature name pauth. The new
feature PAuth_LR introduced in Armv9.5-A is an extension of the PAuth feature
of Armv8.3-A. Using a different naming for it not based on the formerly "PAC"
would create confusion.
Next to code using %ymm<N> or %zmm<N> it is more natural to have .cfi_*
directives also reference those, not the corresponding %xmm<N>. Accept
their names as kind of aliases, i.e. resolving to the same numbers.
While extending the respective 64-bit testcase, also add %bnd<N> there
(should have happened right with 633789901c ["x86-64: Dwarf2 register
numbers for %bnd<N>"], sorry), requiring binutils/dwarf.c to be adjusted
accordingly as well.
While various other entries in version 003 of the spec aren't quite as
explicit (due to simply leaving the respective field blank), all three
have a clear IGNORED there. IOW they ought to be emitted with EVEX.W=0
by default (and respect -mevexwig=).
Most registers from a register-pair suffixed by .lo and .hi suffixes.
This was not the case of $r14 and $r15 since they are defined by the
ABI: $r14 is the frame pointer, and $r15 is used to return aggregates
from functions. We do not add aliases for $r12 (the stack pointer) and
$r13 (the tls register).
opcodes/ChangeLog:
* kvx-opc.c: Regenerate.
gas/ChangeLog:
* config/kvx-parse.h: Regenerate.
TCA instructions start with an X, this introduces ambiguities when it
comes to XOR (Is it the OR on the TCA or the XOR of the core?). For this
reason, we rename OR to IOR and XOR to EOR.
OR and XOR variants are still valid on KV3-1 and KV3-2. However, they
have been completely removed from KV4-1.
opcodes/ChangeLog:
* kvx-opc.c: Regenerate.
include/ChangeLog:
* opcode/kvx.h: Regenerate.
gas/ChangeLog:
* config/kvx-parse.h: Regenerate.
* testsuite/gas/kvx/kv3-1-insns-32.d: Regenerate.
* testsuite/gas/kvx/kv3-1-insns-32.s: Regenerate.
* testsuite/gas/kvx/kv3-1-insns-64.d: Regenerate.
* testsuite/gas/kvx/kv3-1-insns-64.s: Regenerate.
* testsuite/gas/kvx/kv3-2-insns-32.d: Regenerate.
* testsuite/gas/kvx/kv3-2-insns-32.s: Regenerate.
* testsuite/gas/kvx/kv3-2-insns-64.d: Regenerate.
* testsuite/gas/kvx/kv3-2-insns-64.s: Regenerate.
* testsuite/gas/kvx/kv4-1-insns-32.d: Regenerate.
* testsuite/gas/kvx/kv4-1-insns-32.s: Regenerate.
* testsuite/gas/kvx/kv4-1-insns-64.d: Regenerate.
* testsuite/gas/kvx/kv4-1-insns-64.s: Regenerate.
