This patch adds a new framework to add architecture sensitive extensions, like
GCC does. This patch also implements all architecture extensions currently
available in GCC.
This framework works as follows. To enable architecture sensitive extensions
for a particular architecture, that architecture must contain an ARM_ARCH_OPT2
entry in the 'arm_archs' table. All fields here are the same as previous, with
the addition of a new extra field at the end to <name> it's extension table.
This <name>, corresponds to a <name>_ext_table of type 'struct arm_ext_table'.
This struct can be filled with three types of entries:
ARM_ADD (string <ext>, arm_feature_set <enable_bits>), which means +<ext> will
enable <enable_bits>
ARM_REMOVE (string <ext>, arm_feature_set <disable_bits>), which means
+no<ext> will disable <disable_bits>
ARM_EXT (string <ext>, arm_feature_set <enable_bits>, arm_feature_set
<disable_bits>), which means +<ext> will enable <enable_bits> and +no<ext>
will disable <disable_bits> (this is to be used instead of adding an
ARM_ADD and ARM_REMOVE for the same <ext>)
This patch does not disable the use of the old extensions, even if some of them
are duplicated in the new tables. This is a "in-between-step" as we may want to
deprecate the old table of extensions in later patches. For now, GAS will first
look for the +<ext> or +no<ext> in the new table and if no entry is found it
will continue searching in the old table, following old behaviour. If only an
ARM_ADD or an ARM_REMOVE is defined for <ext> and +no<ext> or +<ext> resp. is
used then it also continues to search the old table for it.
A couple of caveats:
- This patch does not enable the use of these architecture extensions with the
'.arch_extension' directive. This is future work that I will tend to later.
- This patch does not enable the use of these architecture extensions with the
-mcpu option. This is future work that I will tend to later.
- This patch does not change the current behaviour when combining an
architecture extension and using -mfpu on the command-line. The current
behaviour of GAS is to stage the union of feature bits enabled by both -march
and -mfpu. GCC behaves differently here, so this is something we may want to
revisit on a later date.
"mtfsb0 4*cr7+lt" doesn't make all that much sense, but unfortunately
glibc uses just that instead of "mtfsb0 28" to clear the fpscr xe bit.
So for backwards compatibility accept cr field expressions when
assembling mtfsb operands, but disassemble to a plain number.
PR 24390
include/
* opcode/ppc.h (PPC_OPERAND_CR_REG): Comment.
opcodes/
* ppc-opc.c (BTF): Define.
(powerpc_opcodes): Use for mtfsb*.
* ppc-dis.c (print_insn_powerpc): Print fields with both
PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number.
gas/
* testsuite/gas/ppc/476.d: Update mtfsb*.
* testsuite/gas/ppc/a2.d: Likewise.
The AArch64 disassembler has an optimization that it uses to reduce the amount
it has to search for mapping symbols during disassembly. This optimization
assumes that sections are listed in the section header in monotonic increasing
VMAs. However this is not a requirement for the ELF specification.
Because of this when such "out of order" sections occur the disassembler would
pick the wrong mapping symbol to disassemble the section with.
This fixes it by explicitly passing along the stop offset for the current
disassembly glob and when this changes compared to the previous one we've seen
the optimization won't be performed. In effect this restarts the search from
a well defined starting point. Usually the symbol's address.
The existing stop_vma can't be used for this as it is allowed to be unset and
setting this unconditionally would change the semantics of this field.
binutils/ChangeLog:
* objdump.c (disassemble_bytes): Pass stop_offset.
* testsuite/binutils-all/aarch64/out-of-order.T: New test.
* testsuite/binutils-all/aarch64/out-of-order.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.s: New test.
include/ChangeLog:
* dis-asm.h (struct disassemble_info): Add stop_offset.
opcodes/ChangeLog:
* aarch64-dis.c (last_stop_offset): New.
(print_insn_aarch64): Use stop_offset.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds new definitions of PAC enabled PLTs
and both BTI and PAC enabled PLTs.
2) It also defines the new dynamic tag DT_AARCH64_PAC_PLT
for the PAC enabled PLTs.
3) This patch adds a new ld command line option: --pac-plt.
In the presence of this option, the linker uses the PAC
enabled PLTs and marks with DT_AARCH64_PAC_PLT.
4) In case both BTI and PAC are enabled the linker should
pick PLTs enabled with both and also use dynamic tags for both.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elfnn-aarch64.c (PLT_PAC_ENTRY_SIZE, PLT_PAC_SMALL_ENTRY_SIZE): New.
(PLT_BTI_PAC_ENTRY_SIZE, PLT_BTI_PAC_SMALL_ENTRY_SIZE): New.
(setup_plt_values): Account for PAC or PAC and BTI enabled PLTs.
(elfNN_aarch64_size_dynamic_sections): Add checks for PLT_BTI_PAC
and PLT_PAC_PLT.
(elfNN_aarch64_finish_dynamic_sections): Account for PLT_BTI_PAC.
(get_plt_type): Add case for DT_AARCH64_PAC_PLT.
(elfNN_aarch64_plt_sym_val): Add cases for PLT_BTI_PAC and PLT_PAC.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (get_aarch64_dynamic_type): Add case for
DT_AARCH64_PAC_PLT.
(dynamic_section_aarch64_val): Likewise.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/aarch64.h (DT_AARCH64_PAC_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document --pac-plt.
* emultempl/aarch64elf.em (OPTION_PAC_PLT): New.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Add pac-plt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_PAC_PLT.
* testsuite/ld-aarch64/aarch64-elf.exp: Add the following tests.
* testsuite/ld-aarch64/bti-pac-plt-1.d: New test.
* testsuite/ld-aarch64/bti-pac-plt-2.d: New test.
* testsuite/ld-aarch64/pac-plt-1.d: New test.
* testsuite/ld-aarch64/pac-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: Add .ifndef directive.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
1) This patch adds a new ld command line option: --force-bti.
In the presence of this option, the linker enables BTI with the
GNU_PROPERTY_AARCH64_FEATURE_1_BTI feature. This gives out warning
in case of missing gnu notes for BTI in inputs.
2) It also defines a new set of BTI enabled PLTs. These are used either
when all the inputs are marked with GNU_PROPERTY_AARCH64_FEATURE_1_BTI
or when the new --force-bti option is used. This required adding new
fields in elf_aarch64_link_hash_table so that we could make the PLT
related information more generic.
3) It also defines a dynamic tag DT_AARCH64_BTI_PLT. The linker uses
this whenever it picks BTI enabled PLTs.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* bfd-in.h (aarch64_plt_type, aarch64_enable_bti_type): New.
(aarch64_bti_pac_info): New.
(bfd_elf64_aarch64_set_options): Add aarch64_bti_pac_info argument.
(bfd_elf32_aarch64_set_options): Likewise.
* bfd-in2.h: Regenerate
* elfnn-aarch64.c (PLT_BTI_ENTRY_SIZE): New.
(PLT_BTI_SMALL_ENTRY_SIZE, PLT_BTI_TLSDESC_ENTRY_SIZE): New.
(elfNN_aarch64_small_plt0_bti_entry): New.
(elfNN_aarch64_small_plt_bti_entry): New.
(elfNN_aarch64_tlsdesc_small_plt_bti_entry): New.
(elf_aarch64_obj_tdata): Add no_bti_warn and plt_type fields.
(elf_aarch64_link_hash_table): Add plt0_entry, plt_entry and
tlsdesc_plt_entry_size fields.
(elfNN_aarch64_link_hash_table_create): Initialise the new fields.
(setup_plt_values): New helper function.
(bfd_elfNN_aarch64_set_options): Use new bp_info to set plt sizes and
bti enable type.
(elfNN_aarch64_allocate_dynrelocs): Use new size members instead of
fixed macros.
(elfNN_aarch64_size_dynamic_sections): Likewise and add checks.
(elfNN_aarch64_create_small_pltn_entry): Use new generic pointers
to plt stubs instead of fixed ones and update filling them according
to the need for bti.
(elfNN_aarch64_init_small_plt0_entry): Likewise.
(elfNN_aarch64_finish_dynamic_sections): Likewise.
(get_plt_type, elfNN_aarch64_get_synthetic_symtab): New.
(elfNN_aarch64_plt_sym_val): Update size accordingly.
(elfNN_aarch64_link_setup_gnu_properties): Set up plts if BTI GNU NOTE
is set.
(bfd_elfNN_get_synthetic_symtab): Define.
(elfNN_aarch64_merge_gnu_properties): Give out warning with --force-bti
and mising BTI NOTE SECTION.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* readelf.c (get_aarch64_dynamic_type): New.
(get_dynamic_type): Use above for EM_AARCH64.
(dynamic_section_aarch64_val): New.
(process_dynamic_section): Use above for EM_AARCH64.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* elf/aarch64.h (DT_AARCH64_BTI_PLT): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
Szabolcs Nagy <szabolcs.nagy@arm.com>
* NEWS: Document --force-bti.
* emultempl/aarch64elf.em (plt_type, bti_type, OPTION_FORCE_BTI): New.
(PARSE_AND_LIST_SHORTOPTS, PARSE_AND_LIST_OPTIONS): Add force-bti.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_FORCE_BTI.
* testsuite/ld-aarch64/aarch64-elf.exp: Add all the tests below.
* testsuite/ld-aarch64/bti-plt-1.d: New test.
* testsuite/ld-aarch64/bti-plt-1.s: New test.
* testsuite/ld-aarch64/bti-plt-2.s: New test.
* testsuite/ld-aarch64/bti-plt-2.d: New test.
* testsuite/ld-aarch64/bti-plt-3.d: New test.
* testsuite/ld-aarch64/bti-plt-4.d: New test.
* testsuite/ld-aarch64/bti-plt-5.d: New test.
* testsuite/ld-aarch64/bti-plt-6.d: New test.
* testsuite/ld-aarch64/bti-plt-7.d: New test.
* testsuite/ld-aarch64/bti-plt-so.s: New test.
* testsuite/ld-aarch64/bti-plt.ld: New test.
This is part of the patch series to add support for BTI and
PAC in AArch64 linker.
This patch implements the following:
1) This extends in the gnu property support in the linker for
AArch64 by defining backend hooks for elf_backend_setup_gnu_properties,
elf_backend_merge_gnu_properties and elf_backend_parse_gnu_properties.
2) It defines AArch64 specific GNU property
GNU_PROPERTY_AARCH64_FEATURE_1_AND and 2 bit for BTI and PAC in it.
3) It also adds support in readelf.c to read and print these new
GNU properties in AArch64.
All these are made according to the new AArch64 ELF ABI
https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4
*** bfd/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf-properties.c (_bfd_elf_link_setup_gnu_properties): Exclude
linker created inputs from merge.
* elfnn-aarch64.c (struct elf_aarch64_obj_tdata): Add field for
GNU_PROPERTY_AARCH64_FEATURE_1_AND properties.
(elfNN_aarch64_link_setup_gnu_properties): New.
(elfNN_aarch64_merge_gnu_properties): New.
(elf_backend_setup_gnu_properties): Define for AArch64.
(elf_backend_merge_gnu_properties): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_link_setup_gnu_properties): Define.
(_bfd_aarch64_elf_parse_gnu_properties): Define.
(_bfd_aarch64_elf_merge_gnu_properties): Define.
* elfxx-aarch64.h (_bfd_aarch64_elf_link_setup_gnu_properties): Declare.
(_bfd_aarch64_elf_parse_gnu_properties): Declare.
(_bfd_aarch64_elf_merge_gnu_properties): Declare.
(elf_backend_parse_gnu_properties): Define for AArch64.
*** binutils/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* readelf.c (decode_aarch64_feature_1_and): New.
(print_gnu_property_note): Add case for AArch64 gnu notes.
*** include/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* elf/common.h (GNU_PROPERTY_AARCH64_FEATURE_1_AND): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_BTI): New.
(GNU_PROPERTY_AARCH64_FEATURE_1_PAC): New.
*** ld/ChangeLog ***
2019-03-13 Sudakshina Das <sudi.das@arm.com>
* NEWS: Document GNU_PROPERTY_AARCH64_FEATURE_1_BTI and
GNU_PROPERTY_AARCH64_FEATURE_1_PAC.
* testsuite/ld-aarch64/aarch64-elf.exp: Add run commands for new tests.
* testsuite/ld-aarch64/property-bti-pac1.d: New test.
* testsuite/ld-aarch64/property-bti-pac1.s: New test.
* testsuite/ld-aarch64/property-bti-pac2.d: New test.
* testsuite/ld-aarch64/property-bti-pac2.s: New test.
* testsuite/ld-aarch64/property-bti-pac3.d: New test.
Used for the AArch64 pointer authentication code mask registers in Arm v8.3-a.
NT_ARM_PAC_MASK matches the value in Linux include/uapi/linux/elf.h
include/ChangeLog:
* elf/common.h (NT_ARM_PAC_MASK): Add define.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_aarch_pauth): Add declaration.
* elf.c (elfcore_grok_aarch_pauth): New function.
(elfcore_grok_note): Check for NT_ARM_PAC_MASK.
(elfcore_write_aarch_pauth): New function.
(elfcore_write_register_note): Check for AArch64 pauth section.
When a node is removed from a splay tree, the splay tree was
not using the function splay_tree_delete_key_fn to release the key.
This was causing a leak, fixed by Tom Tromey.
This patch fixes another key leak, that happens when a key equal to
a key already present is inserted. In such a case, we have to release
the old KEY.
Note that this is based on the assumption that the caller always
allocates a new KEY when doing an insert.
Also, clarify the documentation about when the release functions are
called.
2019-02-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* splay-tree.h (splay_tree_delete_key_fn): Update comment.
(splay_tree_delete_value_fn): Likewise.
libiberty/ChangeLog
2019-02-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* splay-tree.c (splay_tree_insert): Also release old KEY in case
of insertion of a key equal to an already present key.
(splay_tree_new_typed_alloc): Update comment.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@268793 138bc75d-0d04-0410-961f-82ee72b054a4
opcodes/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Accept arch13 as cpu string.
* s390-opc.c: Add new instruction formats and instruction opcode
masks.
* s390-opc.txt: Add new arch13 instructions.
include/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH13.
gas/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch13.
* doc/c-s390.texi: Document arch13 march option.
* testsuite/gas/s390/s390.exp: Run the arch13 related tests.
* testsuite/gas/s390/zarch-arch13.d: New test.
* testsuite/gas/s390/zarch-arch13.s: New test.
* testsuite/gas/s390/zarch-z13.d: Expect the renamed mnemonics
also for z13.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV
instructions. These instructions needed special infrastructure to support
[base]! style for addressing mode. That is also removed now.
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* config/tc-aarch64.c (parse_address_main): Remove support for
[base]! address expression.
(parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2.
(warn_unpredictable_ldst): Remove support for ldstgv_indexed.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv
and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** include/ChangeLog ***
* opcode/aarch64.h (enum aarch64_opnd): Remove
AARCH64_OPND_ADDR_SIMPLE_2.
(enum aarch64_insn_class): Remove ldstgv_indexed.
*** opcodes/ChangeLog ***
* aarch64-asm.c (aarch64_ins_addr_simple_2): Remove.
* aarch64-asm.h (ins_addr_simple_2): Likeiwse.
* aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise.
* aarch64-dis.h (ext_addr_simple_2): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): Remove
case for ldstgv_indexed.
(aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv.
(AARCH64_OPERANDS): Remove ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
coff/ecoff.h refers to some names defined in coff/sym.h. Include the
latter from the former, so that users of the header don't need to know
this detail.
2019-01-22 Tom Tromey <tom@tromey.com>
* coff/ecoff.h: Include coff/sym.h.
Include <string.h> to dis-asm.h to get strchr declaration
include/Changelog:
2019-01-11 Pavel I. Kryukov <kryukov@frtk.ru>
* dis-asm.h: include <string.h>
. * libiberty: Sync with gcc. Bring in:
2019-01-09 Sandra Loosemore <sandra@codesourcery.com>
PR other/16615
* cp-demangle.c: Mechanically replace "can not" with "cannot".
* floatformat.c: Likewise.
* strerror.c: Likewise.
2018-12-22 Jason Merrill <jason@redhat.com>
Remove support for demangling GCC 2.x era mangling schemes.
* cplus-dem.c: Remove cplus_mangle_opname, cplus_demangle_opname,
internal_cplus_demangle, and all subroutines.
(libiberty_demanglers): Remove entries for ancient GNU (pre-3.0),
Lucid, ARM, HP, and EDG demangling styles.
(cplus_demangle): Remove 'work' variable. Don't call
internal_cplus_demangle.
include * Merge from GCC:
2018-12-22 Jason Merrill <jason@redhat.com>
* demangle.h: Remove support for ancient GNU (pre-3.0), Lucid,
ARM, HP, and EDG demangling styles.
PPC_INT_FMT is redundant now that bfd.h pulls in inttypes.h if
available. Apparently MacOS Mojave defines int64_t as long long even
though long is also 64 bits, which confuses the logic selecting
PPC_INT_FMT (and BFD_PRI64 too). Hopefully inttypes.h is available on
Mojave.
PR 24028
include/
* opcode/ppc.h (PPC_INT_FMT): Delete.
opcodes/
* ppc-dis.c (print_insn_powerpc): Replace PPC_INT_FMT uses with
PRId64/PRIx64.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
PR 88409
include * demangle.h (DEMANGLE_RECURSION_LIMIT): Increase to 2048.
binutils* NEWS: Note that recursion limit has increased to 2048.
* doc/binutils.texi: Likewise.
This patch addresses the multitude of bug reports about resource exhaustion
in libiberty's name demangling code. It adds a limit to the amount of
recursion that is allowed, before an error is triggered. It also adds a
new demangling option to disable this limit. (The limit is enabled by
default).
PR 87681
PR 87675
PR 87636
PR 87335
libiberty * cp-demangle.h (struct d_info): Add recursion_limit field.
* cp-demangle.c (d_function_type): If the recursion limit is
enabled and reached, return with a failure result.
(d_demangle_callback): If the recursion limit is enabled, check
for a mangled string that is so long that there is not enough
stack space for the local arrays.
* cplus-dem.c (struct work): Add recursion_level field.
(demangle_nested_args): If the recursion limit is enabled and
reached, return with a failure result.
include * demangle.h (DMGL_RECURSE_LIMIT): Define.
(DEMANGLE_RECURSION_LIMIT): Prototype.
binutuils * addr2line.c (demangle_flags): New static variable.
(long_options): Add --recurse-limit and --no-recurse-limit.
(translate_address): Pass demangle_flags to bfd_demangle.
(main): Handle --recurse-limit and --no-recurse-limit options.
* cxxfilt.c (flags): Add DMGL_RECURSE_LIMIT.
(long_options): Add --recurse-limit and --no-recurse-limit.
(main): Handle new options.
* dlltool.c (gen_def_file): Include DMGL_RECURSE_LIMIT in flags
passed to cplus_demangle.
* nm.c (demangle_flags): New static variable.
(long_options): Add --recurse-limit and --no-recurse-limit.
(main): Handle new options.
* objdump.c (demangle_flags): New static variable.
(usage): Add --recurse-limit and --no-recurse-limit.
(long_options): Likewise.
(objdump_print_symname): Pass demangle_flags to bfd_demangle.
(disassemble_section): Likewise.
(dump_dymbols): Likewise.
(main): Handle new options.
* prdbg.c (demangle_flags): New static variable.
(tg_variable): Pass demangle_flags to demangler.
(tg_start_function): Likewise.
* stabs.c (demangle_flags): New static variable.
(stab_demangle_template): Pass demangle_flags to demangler.
(stab_demangle_v3_argtypes): Likewise.
(stab_demangle_v3_arg): Likewise.
* doc/binutuls.texi: Document new command line options.
* NEWS: Mention the new feature.
* testsuite/config/default.exp (CXXFILT): Define if not already
defined.
(CXXFILTFLAGS): Likewise.
* testsuite/binutils-all/cxxfilt.exp: New file. Runs a few
simple tests of the cxxfilt program.
This patch started off just adding the warnings in tc-ppc.c about
incorrect usage of @l, @h and @ha in instructions that don't have
16-bit D-form fields. That unfortunately showed up three warnings in
ld/testsuite/ld-powerpc/vle-multiseg.s on instructions like
e_li r3, IV_table@l+0x00
which was being assembled to
8: 70 60 00 00 e_li r3,0
a: R_PPC_ADDR16_LO IV_table
The ADDR16_LO reloc is of course completely bogus on e_li, which has
a split 20-bit signed integer field in bits 0x1f7fff, the low 11 bit
in 0x7ff, the next 5 bits in 0x1f0000, and the high 4 bits in 0x7800.
Applying an ADDR16_LO reloc to the instruction potentially changes
the e_li instruction to e_add2i., e_add2is, e_cmp16i, e_mull2i,
e_cmpl16i, e_cmph16i, e_cmphl16i, e_or2i, e_and2i., e_or2is, e_lis,
e_and2is, or some invalid encodings.
Now there is a relocation that suits e_li, R_PPC_VLE_ADDR20, which was
added 2017-09-05 but I can't see code in gas to generate the
relocation. In any case, VLE_ADDR20 probably doesn't have the correct
semantics for @l since ideally you'd want an @l to pair with @h or @ha
to generate a 32-bit constant. Thus @l should only produce a 16-bit
value, I think. So we need some more relocations to handle e_li it
seems, or as I do in this patch, modify the behaviour of existing
relocations when applied to e_li instructions.
include/
* opcode/ppc.h (E_OPCODE_MASK, E_LI_MASK, E_LI_INSN): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_VLE_ADDR20>): Correct
mask and shift value.
(ppc_elf_vle_split16): Use E_OPCODE_MASK. Handle e_li
specially.
gas/
* config/tc-ppc.c (md_assemble): Adjust relocs for VLE before
TLS tweaks. Handle e_li. Warn on unexpected operand field
for lo16/hi16/ha16 relocs.
The RISC-V assembler generates fake labels with the name '.L0 ' as
part of the debug information (see
gas/config/tc-riscv.h:FAKE_LABEL_NAME).
The problem is that currently, when disassembling an object file, the
output looks like this (this is an example from the GDB testsuite, but
is pretty representative of anything with debug information):
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
0000000000000026 <.L0 >:
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
0000000000000034 <.L0 >:
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L0 >
0000000000000046 <.L0 >:
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
0000000000000050 <.L0 >:
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <.L0 +0xe>
0000000000000066 <.L0 >:
66: 4785 li a5,1
68: a869 j 102 <.L0 >
000000000000006a <.L0 >:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L0 +0x8>
The frequent repeated '.L0 ' labels are pointless, as they are
non-unique there's no way to match a use of '.L0 ' to its appearence
in the output, so we'd be better off just not printing it at all.
That's what this patch does by defining a 'symbol_is_valid' method for
RISC-V. With this commit, the same disassembly now looks like this:
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L4>
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <main+0x40>
66: 4785 li a5,1
68: a869 j 102 <.L5>
000000000000006a <.L4>:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L4+0x8>
In order to share the fake label between the assembler and the
libopcodes library, I've added some new defines RISCV_FAKE_LABEL_NAME
and RISCV_FAKE_LABEL_CHAR in include/opcode/riscv.h. I could have
just moved FAKE_LABEL_NAME to the include file, however, I thnk this
would be confusing, someone working on the assembler would likely not
expect to find FAKE_LABEL_NAME defined outside of the assembler source
tree. By introducing the RISCV_FAKE_LABEL_* defines I can leave the
assembler standard FAKE_LABEL_ defines in the assembler source, but
still share the RISCV_FAKE_LABEL_* with libopcodes.
gas/ChangeLog:
* config/tc-riscv.h (FAKE_LABEL_NAME): Define as
RISCV_FAKE_LABEL_NAME.
(FAKE_LABEL_CHAR): Define as RISCV_FAKE_LABEL_CHAR.
include/ChangeLog:
* dis-asm.h (riscv_symbol_is_valid): Declare.
* opcode/riscv.h (RISCV_FAKE_LABEL_NAME): Define.
(RISCV_FAKE_LABEL_CHAR): Define.
opcodes/ChangeLog:
* disassembler.c (disassemble_init_for_target): Add RISC-V
initialisation.
* riscv-dis.c (riscv_symbol_is_valid): New function.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Bulk Allocation Tag instructions from
MTE. These are the following instructions added in this patch:
- LDGV <Xt>, [<Xn|SP>]!
- STGV <Xt>, [<Xn|SP>]!
This needed a new kind of operand for the new addressing [<Xn|SP>]!
since this has no offset and only takes a pre-indexed version.
Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced.
(AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does
not allow writeback). We also needed new encoding and decoding
functions to be able to do the same.
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2.
(aarch64_insn_class): Add ldstgv_indexed.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it.
(warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag setting instructions from
MTE which consists of the following instructions:
- STG [<Xn|SP>, #<simm>]
- STG [<Xn|SP>, #<simm>]!
- STG [<Xn|SP>], #<simm>
- STZG [<Xn|SP>, #<simm>]
- STZG [<Xn|SP>, #<simm>]!
- STZG [<Xn|SP>], #<simm>
- ST2G [<Xn|SP>, #<simm>]
- ST2G [<Xn|SP>, #<simm>]!
- ST2G [<Xn|SP>], #<simm>
- STZ2G [<Xn|SP>, #<simm>]
- STZ2G [<Xn|SP>, #<simm>]!
- STZ2G [<Xn|SP>], #<simm>
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]!
- STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm>
where
<Xn|SP> : Is the 64-bit GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range -4096 to 4080, defaulting to 0.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11
and AARCH64_OPND_ADDR_SIMM13.
(aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(fix_insn): Likewise.
(warn_unpredictable_ldst): Exempt STGP.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g,
stzg, stz2g and stgp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag generation instructions from
MTE. These are the following instructions added in this patch:
- IRG <Xd|SP>, <Xn|SP>{, Xm}
- ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- GMI <Xd>, <Xn|SP>, <Xm>
where
<Xd|SP> : Is the 64-bit destination GPR or Stack pointer.
<Xn|SP> : Is the 64-bit source GPR or Stack pointer.
<uimm6> : Is the unsigned immediate, a multiple of 16
in the range 0 to 1008.
<uimm4> : Is the unsigned immediate, in the range 0 to 15.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: New.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.d: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions. Memory Tagging Extension is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds the new command line option and the new feature macros.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "memtag"
as a new option.
* doc/c-aarch64.texi: Document the same.
bfd * mach-o.h: Add new enums for BFD_MACH_O_PLATFORM_MACOS,
BFD_MACH_O_PLATFORM_IOS, BFD_MACH_O_PLATFORM_TVOS,
BFD_MACH_O_PLATFORM_WATCHOS, BFD_MACH_O_PLATFORM_BRIDGEOS,
BFD_MACH_O_TOOL_CLANG, BFD_MACH_O_TOOL_SWIFT, BFD_MACH_O_TOOL_LD.
(struct bfd_mach_o_note_command): New.
(struct bfd_mach_o_build_version_tool): New.
(struct bfd_mach_o_build_version_command): New.
(bfd_mach_o_read_version_min): Don't split version into
a few fields. Rename reserved to sdk.
* mach-o.c (bfd_mach_o_read_version_min): Don't split version into a
few fields. Rename reserved to sdk.
(bfd_mach_o_read_command): Handle LC_VERSION_MIN_TVOS, LC_NOTE,
LC_BUILD_VERSION.
(bfd_mach_o_read_note): New.
(bfd_mach_o_read_build_version): New.
PR 23728
binutils* od-macho.c (printf_version): New.
(dump_load_command): Use it to print version. Print sdk version. Print
version info for watchOS and tvOS. Print LC_NOTE, LC_BUILD_VERSION.
(dump_buld_version): New.
(bfd_mach_o_platform_name): New
(bfd_mach_o_tool_name): New
* mach-o/external.h (mach_o_nversion_min_command_external): Rename
reserved to sdk.
(mach_o_note_command_external): New.
(mach_o_build_version_command_external): New.
* mach-o/loader.h (BFD_MACH_O_LC_VERSION_MIN_TVOS): Define.
(BFD_MACH_O_LC_NOTE): Define.
This patch addresses the following
1) Adding ARMv8.5-A in select_arm_features.
2) Updating the feature macro so that the new ARM_EXT2_* features for
Armv8.5-A are moved to ARM_AEXT2_V8_5A.
*** opcodes/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (select_arm_features): Update bfd_mach_arm_8
with Armv8.5-A. Remove reduntant ARM_EXT2_FP16_FML.
*** include/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_ARCH_V8_5A): Move ARM_EXT2_PREDRES and
ARM_EXT2_SB to ...
(ARM_AEXT2_V8_5A): Here.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds support for the mitigation for Spectre Variant 4 by
adding the PSTATE bit SSBS which are accessible using MSR and MRS
instructions. Although this is a mandatory addition to the ARMv8.5-A,
it is permitted to be added to any version of the ARMv8 architecture.
This is enabled using the command line option of +ssbs for older
versions.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SSBS): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Add
SSBS in the check for one-bit immediate.
(aarch64_sys_regs): New entry for SSBS.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for SSBS.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "ssbs".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/ssbs-illegal1.d: New test.
* testsuite/gas/aarch64/ssbs-illegal1.l: New test.
* testsuite/gas/aarch64/ssbs-illegal2.d: New test.
* testsuite/gas/aarch64/ssbs-illegal2.l: New test.
* testsuite/gas/aarch64/ssbs.s: New test.
* testsuite/gas/aarch64/ssbs1.d: Test with +ssbs
* testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the new system registers SCXTNUM_ELx and ID_PFR2_EL1.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SCXTNUM): New.
(AARCH64_FEATURE_ID_PFR2): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
(aarch64_sys_reg_supported_p): New checks for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test registers
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification)
The Branch Target Identification instructions (BTI) are allocated to
existing HINT space, using HINT numbers 32, 34, 36, 38, such that
bits[7:6] of the instruction identify the compatibility of the BTI
instruction to different branches.
BTI {<targets>}
where <targets> one of the following, specifying which type of
indirection is allowed:
j : Can be a target of any BR Xn isntruction.
c : Can be a target of any BLR Xn and BR {X16|X17}.
jc: Can be a target of any free branch.
A BTI instruction without any <targets> is the strictest of all and
can not be a target of nay free branch.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BTI): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default.
(aarch64_opnd): Add AARCH64_OPND_BTI_TARGET.
(HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to
define HINT #imm values.
(HINT_OPD_JC, HINT_OPD_NULL): Likewise.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New.
(HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag
with the hint immediate.
* aarch64-opc.c (aarch64_hint_options): New entries for
c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI.
(aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET
while checking for HINT_OPD_F_NOPRINT flag.
* aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to
extract value.
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New.
(aarch64_opcode_table): Add entry for BTI.
(AARCH64_OPERANDS): Add new description for BTI targets.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_bti_operand): New.
(process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET.
(parse_operands): Likewise.
* testsuite/gas/aarch64/system.d: Update for BTI.
* testsuite/gas/aarch64/bti.s: New.
* testsuite/gas/aarch64/bti.d: New.
* testsuite/gas/aarch64/illegal-bti.d: New.
* testsuite/gas/aarch64/illegal-bti.l: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the following:
MSR Xn, RNDR
MSR Xn, RNDRRS
These are optional instructions in ARMv8.5-A and hence the new
+rng is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_RNG): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
rndr and rndrrs.
(aarch64_sys_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): New "rng" option.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: Test both instructions.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/dc-data-cache-operation-an-alias-of-sys)
This patch adds the DC CVADP instruction. Since this has a separate
identification mechanism a new feature bit is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CVADP): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): New entry for cvadp.
(aarch64_sys_ins_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test instruction.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the prediction restriction instructions (that is, cfp,
dvp, cpp). These instructions are retrospectively made optional for
all versions of the architecture from ARMv8.0 to ARMv8.4 and is
mandatory from ARMv8.5. Hence adding a new +predres which can be used
by the older architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default.
(aarch64_opnd): Add AARCH64_OPND_SYSREG_SR.
(aarch64_sys_regs_sr): Declare new table.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
AARCH64_OPND_SYSREG_SR.
* aarch64-opc.c (aarch64_print_operand): Likewise.
(aarch64_sys_regs_sr): Define table.
(aarch64_sys_ins_reg_supported_p): Check for RCTX with
AARCH64_FEATURE_PREDRES.
* aarch64-tbl.h (aarch64_feature_predres): New.
(PREDRES, PREDRES_INSN): New.
(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
(AARCH64_OPERANDS): Add new description for SYSREG_SR.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New.
(parse_operands): Add entry for AARCH64_OPND_SYSREG_SR.
(md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh
with aarch64_sys_regs_sr.
(aarch64_features): Add new "predres" option for older
architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: New.
* testsuite/gas/aarch64/sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.l: New.
* testsuite/gas/aarch64/predres.s: New.
* testsuite/gas/aarch64/predres.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence a new command line option of "+sb" is added for older
architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SB): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_sb): New.
(SB, SB_INSN): New.
(aarch64_opcode_table): Add entry for sb.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "sb" option
for older architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sb.s: New.
* testsuite/gas/aarch64/sb.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the data processing instructions that are new to
ARMv8.5-A.
1) There are 2 instructions: xaflag, axflag, that are added to
manipulate the states of the flag and are used to convert between the
Arm representation and the fcmp representation.
2) The other instructions are rounding instructions which have 8
versions based on whether the floating-point number is a
Single-Precision or Double-Precision number, whether the target
integer is a 32-bit or 64-bit integer and whether the rounding mode is
the ambient rounding mode or to zero. Each of these instruction is
available in both Scalar and Vector forms.
Since both 1) and 2) have separate identification mechanism and it is
permissible that a ARMv8.4 compliant implementation may include any
arbitrary subset of the ARMv8.5 features unless otherwise specified,
new feature bits are added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_FLAGMANIP): New.
(AARCH64_FEATURE_FRINTTS): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_flagmanip): New.
(aarch64_feature_frintts): New.
(FLAGMANIP, FRINTTS): New.
(aarch64_opcode_table): Add entries for xaflag, axflag
and frint[32,64][x,z] instructions.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-dp.s: New.
* testsuite/gas/aarch64/armv8_5-a-dp.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a.
* doc/c-aarch64.texi: Add documentation for the same.
*** include/ChnageLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_5): New.
(AARCH64_ARCH_V8_5): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
(ARMV8_5, V8_5_INSN): New.
