Structions with R_X86_64_GOTTPOFF relocation must be encoded with REX
prefix even if it isn't required by destination register. Otherwise
linker can't safely perform IE -> LE optimization.
bfd/
PR ld/17482
* elf64-x86-64.c (elf_x86_64_relocate_section): Update comments
for IE->LE transition.
gas/
PR ld/17482
* config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix
for structions with R_X86_64_GOTTPOFF relocation for x32 if needed.
gas/testsuite/
PR ld/17482
* gas/i386/ilp32/x32-tls.d: New file.
* gas/i386/ilp32/x32-tls.s: Likewise.
ld/testsuite/
PR ld/17482
* ld-x86-64/tlsie4.dd: Updated.
bfd/
* elfxx-mips.c (update_mips_abiflags_isa): Add E_MIPS_ARCH_32R6
and E_MIPS_ARCH_64R6 support.
ld/testsuite/
* ld-mips-elf/abiflags-strip10-ph.d: New file.
* ld-mips-elf/mips-eld.exp: Run the new test.
gas/
* config/tc-mips.c (mips_elf_final_processing): Add INSN_ISA32R6
and INSN_ISA64R6 support.
gas/testsuite/
* gas/mips/elf_arch_mips32r6.d: New file.
* gas/mips/elf_arch_mips64r6.d: New file.
* gas/mips/mips.exp: Run the new tests.
When performing linker relaxation, reduce the size of symbols that span
the deleted bytes. This ensures that, for example, function symbols
will have the correct size.
bfd/ChangeLog:
* elf32-avr.c (elf32_avr_relax_delete_bytes): During linker
relaxation, reduce the size of symbols that span the deleted
bytes.
ld/ChangeLog:
* testsuite/ld-avr/relax-02.d: Update to check size of symbols has
changed.
* testsuite/ld-avr/relax-03.d: Likewise.
Symbols at the very end of a section were not being updated correctly
when linker relaxation takes place due to the use of '<' instead of
'<='. Added a couple of tests to cover this behaviour.
bfd/ChangeLog:
* elf32-avr.c (elf32_avr_relax_delete_bytes): Modify symbols
located at the very end of the section.
ld/ChangeLog:
* ld/testsuite/ld-avr/relax-02.d: New file.
* ld/testsuite/ld-avr/relax-02.s: New file.
* ld/testsuite/ld-avr/relax-03.d: New file.
* ld/testsuite/ld-avr/relax-03.s: New file.
The @ character is a comment character on ARM, so use % instead. Also
use a wider glob for matching ARM targets to make sure the test gets
run.
ld/testsuite/ChangeLog:
2014-10-30 Will Newton <will.newton@linaro.org>
* ld-unique/unique.exp: Use a wider glob for matching ARM
targets.
* ld-unique/unique.s: Use % instead of @ in .type directive.
* ld-unique/unique_shared.s: Likewise.
2014-10-22 Tejas Belagod <tejas.belagod@arm.com>
bfd/
* bfd-in.h (bfd_elf64_aarch64_set_options): Add a parameter.
* bfd-in2.h (bfd_elf64_aarch64_set_options): Likewise.
* elfnn-aarch64.c (aarch64_erratum_835769_stub): New.
(elf_aarch64_stub_type): Add new type
aarch64_stub_erratum_835769_veneer.
(elf_aarch64_stub_hash_entry): New fields for erratum 835769.
(aarch64_erratum_835769_fix): New data struct to record erratum
835769.
(elf_aarch64_link_hash_table: Global flags for 835769.
(aarch64_build_one_stub): Add case for 835769.
(aarch64_size_one_stub): Likewise.
(aarch64_mem_op_p, aarch64_mlxl_p,
aarch64_erratum_sequence,erratum_835769_scan):
New. Decode and scan functions for erratum 835769.
(elf_aarch64_create_or_find_stub_sec): New.
(elfNN_aarch64_size_stubs): Look for erratum 835769 and record
them.
(bfd_elfNN_aarch64_set_options: Set global flag for 835769.
(erratum_835769_branch_to_stub_data,
make_branch_to_erratum_835769_stub):New. Connect up all the
erratum stubs to occurances by branches.
(elfNN_aarch64_write_section): New hook.
(aarch64_map_one_stub): Output erratum stub symbol.
(elfNN_aarch64_size_dynamic_sections): Init mapping symbol
information for erratum 835769.
(elf_backend_write_section): Define.
ld/
* emultempl/aarch64elf.em: Add command-line option for erratum
835769.
ld/testsuite/
* ld-aarch64/aarch64-elf.exp (aarch64elftests): Drive erratum
835769 tests.
* ld-aarch64/erratum835769.d: New.
* ld-aarch64/erratum835769.s: New.
* ld-scripts/sysroot-prefix.exp: Log $ld_sysroot. Handle sysroot
== "/" as a separate sysroot-configuration with separable
test-types.
(sysroot_prefix_tests): Include all existing sysroot tests in
sysroot == "/" tests except exclude those where a --sysroot option
is not specified.
* lib/ld-lib.exp (check_sysroot_available): Rewrite to use
--print-sysroot instead of relying on error code from using
--sysroot=... Also, set $ld_sysroot.
The reason we exclude not just the failing "full-path =-prefixed
without" but also the passing "plain =-prefixed without but -Lpath"
for sysroot == "/" is that for the latter to succeed, we have to make
assumptions about the system not having a /sysroot directory or
assumptions about its contents etc.
When passing --enable-targets=all --enable-64-bit-bfd (the
latter not required for a "64-bit-host" of course) the ld --help
output got too much to handle for poor tcl (or maybe dejagnu is
to blame) and remote_exec exited with an error, so the
configuration being tested was mishandled as being a
sysroot-less configuration. Using --version instead of --help
would work too, but the new --print-sysroot option calls for
nominal coverage, so why not use that instead.
For binary ouput, we don't have an ELF bfd output so can't access
elf_elfheader. The elf64-ppc.c changes are really just a tidy,
triggered by looking at all places where the abiversion bits are
accessed.
bfd/
* elf64-ppc.c (ppc64_elf_before_check_relocs): Do .opd processing
even when output is not ppc64 ELF. Remove redundant tests on
type of input bfd.
ld/
PR 17488
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't attempt
to access ELF header e_flags when not ppc64 ELF output.
* ldlex.l (INPUTLIST): New start condition.
(comment pattern, ",", "(", ")", "AS_NEEDED")
({FILENAMECHAR1}{FILENAMECHAR}*, "-l"{FILENAMECHAR}+)
(quoted string pattern, whitespace pattern): Add INPUTLIST to
valid start conditions.
(<INPUTLIST>"="{FILENAMECHAR1}{FILENAMECHAR}*): New NAME rule.
(ldlex_inputlist): New start-condition-setter function.
* ldgram.y (input_list1): Rename from input_list. All recursive
use changed.
(input_list): New wrapper rule for input_list1, setting
INPUTLIST lexer state for the duration of parsing input_list1.
All this to say INPUT(=/path/to/file) and not be forced to use
INPUT("=/path/to/file") whenever there's a need to force a sysroot-
prefix. Still, IMHO it seems better to make use of a previously
invalid syntax and not only change the meaning of quoted =-prefixed
paths (though arguably that's not very useful before this patchset).
This got a little bit hairier than I'd expected: I had to add a new
lexer state (aka. start condition) to avoid a first "=" being lexed as
the token "=", despite that not making sense in constructs expecting
file-names in the first place. (The grammar doesn't allow for
expressions in any part of those lists.) I guess I *could* have made
it work using that token anyway, but I didn't like the idea that you
would be able to separate the "=" from the rest of the file-name with
whitespace.
* ldlang.c (lang_add_input_file): If the first character in the
filename is '=', prepend the sysroot and force the context of that
input file to non-sysroot.
The "input_flags.sysrooted = 0" thing described in the comment is
covered by the testsuite part ("root-anchored =-prefixed script
inside"), but only observable for --with-sysroot configurations.
* ld-scripts/sysroot-prefix.exp, ld-scripts/sysroot-prefix-x.s,
ld-scripts/sysroot-prefix-y.s: New files.
N.B: full coverage is only possible with complementary use of
--with-sysroot when configuring.
* ld.texinfo (input files in linker scripts): When mentioning
behavior of first character "/" on scripts within sysroot, also
mention that effect can be forced by prefixing with "=" and
refer to SEARCH_DIR.
The idea here is to drop .eh_frame FDEs corresponding to dropped
comdat group sections or linkonce sections, but not perform changes in
encoding.
bfd/
PR 17467
* elf-eh-frame.c (ENSURE_NO_RELOCS): Don't stop at first NONE reloc.
(_bfd_elf_parse_eh_frame): When relocatable output, don't set
flags enabling conversion of CIEs and FDEs to use relative encoding.
(find_merged_cie): Similarly.
(_bfd_elf_write_section_eh_frame): Don't edit FDEs when
relocatable, except for CIE pointer.
* elflink.c (bfd_elf_reloc_symbol_deleted_p): Return true for
relocs against symbols in dropped comdat group sections.
(bfd_elf_discard_info): Do some eh_frame optimisation when
relocatable.
ld/
* ldlang.c (lang_add_section): Set up map_head.s and map_tail.s when
relocatable.
These are useless because they can't match any address. In fact,
worse than useless because the .eh_frame_hdr lookup table matching
addresses to FDEs does not contain information about the FDE range.
The table is sorted by address; Range is inferred by the address
delta from one entry to the next. So if a zero address range FDE is
followed by a normal non-zero range FDE for the same address,
everything is good. However, the qsort could just as easily sort the
FDEs in the other order, in which case the normal FDE would
effectively be seen to have a zero range.
bfd/
PR 17447
* elf-bfd.h (struct eh_cie_fde): Comment re NULL u.fde.cie_inf.
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Mark zero address
range FDEs for discarding.
(vma_compare): Sort on range after address.
(_bfd_elf_gc_mark_fdes): Test for NULL u.fde.cie_inf.
(_bfd_elf_discard_section_eh_frame): Likewise. Write "FDE" in
error message rather than "fde".
(_bfd_elf_write_section_eh_frame_hdr): Write "PC" and "FDE" in
error message.
ld/testsuite/
* ld-elf/eh1.s: Don't create FDEs with zero address ranges.
* ld-elf/eh3.s: Likewise.
* ld-elf/eh1.d, * ld-elf/eh2.d, * ld-elf/eh3.d: Adjust.
* ld-mips-elf/eh-frame1-n32.d: Warning match update.
* ld-mips-elf/eh-frame1-n64.d: Likewise.
* ld-mips-elf/eh-frame2-n32.d: Likewise.
* ld-mips-elf/eh-frame2-n64.d: Likewise.
I originally had this as --print-prog-name and changed back to
--print-file-name to suit older gcc, neglecting to check whether
gcc-5.0 --print-file-name finds the lto plugin. It doesn't.
* ld-plugin/lto.exp: Use both --print-file-name and --print-prog-name
when looking for lto plugin.
different architecture tags. Add a test case to make sure that this works,
and update readelf so that it will not seg-fault when trying to display the
attributes of binaries with invalid architecture tags.
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Return false if
failed to merge.
* ld-arm/attr-merge-arch-2.d: New test case.
* ld-arm/attr-merge-arch-2a.s: New test case source file.
* ld-arm/attr-merge-arch-2b.s: Likewise.
* ld-arm/arm-elf.exp: Run new test case.
* readelf.c (display_arm_attribute): Use unsigned int type for
tag, val and type variables.
Refactor each relaxation pattern to raise the maintainability.
In origin, all patterns is analysed in nds32_elf_relax_section,
so it is hard to debug and maintain. Therefore, we classify all
patterns into different functions in this patch.
Moreover, we adjust all optimizations into nds32_elf_relax_section
to take these optimizations in turn. This can promise all relaxation
being done after calling gld${EMULATION_NAME}_after_allocation.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
The section name used to store the build-id on pe/coff is arbitrary, as it's
contents should be located using the pe/coff header's DataDirectory debug data
entry, not by using the section name.
But '.build-id' is not a good choice for that section name, as it is 9
characters long, and hence truncated to 8 characters when
--disable-long-section-names is used (which is the default, when producing an
executable with no dwarf debug sections, e.g. using ld --strip-all --build-id)
This truncation then breaks 'objcopy --only-keep-debug', which does use the
section name, due to concerns that keeping an arbitrary section which contains
the debug directory is not sensible.
binutils/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* objcopy.c (is_nondebug_keep_contents_section): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
ld/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* emultempl/pe.em (write_build_id, setup_build_id): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
* emultempl/pep.em (write_build_id, setup_build_id): Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
2014-08-26 Jiong Wang <jiong.wang@arm.com>
bfd/
* elfnn-aarch64.c (elfNN_aarch64_check_relocs): Initialize non_got_ref
properly for MOVW_G0/1/2_NC and MOVW_G3. Reject them when linking
shared library.
(elfNN_aarch64_gc_sweep_hook): Add check on these relocs.
ld/testsuite/
* ld-aarch64/copy-relocs-so.s: New test file.
* ld-aarch64/copy-relocs-exe.s: Likewise.
* ld-aarch64/copy-relocs.d: New expectation file.
* ld-aarch64/emit-relocs-264-bad.d: New test file.
* ld-aarch64/emit-relocs-266-bad.d: Likewise.
* ld-aarch64/emit-relocs-268-bad.d: Likewise.
* ld-aarch64/emit-relocs-269-bad.d: Likewise.
* ld-aarch64/aarch64-elf.exp: Run new added test.
Resolves PR 17312
* ld-aarch64/eh-frame-foo.s: Use 8-byte offset for X30.
* ld-aarch64/eh-frame-bar.s: Likewise.
* ld-aarch64/eh-frame.d: Updated to match current readelf output.
* ld-elf/eh5.d: Allow any register names.
Only set the VLE flag if the instruction has been pulled via the VLE
instruction set. This way the flag is guaranteed to be set for VLE-only
instructions or for VLE-only processors, however it'll remain clear for
dual-mode instructions on dual-mode and, more importantly, standard-mode
processors.
gas/
* config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
flag if both the processor and opcode flags match.
ld/testsuite/
* ld-powerpc/apuinfo-vle.rd: New test.
* ld-powerpc/apuinfo-vle.s: New test source.
* ld-powerpc/apuinfo.rd: Adjust according to GAS PPC_APUINFO_VLE
handling change.
* ld-powerpc/powerpc.exp: Run the new test.
I noticed recently that .eh_frame FDEs generated by the linker for
call stubs and .glink weren't being indexed in .eh_frame_hdr, due to
bfd_elf_discard_info being run before the linker generated .eh_frame
sections were available for parsing. This patch moves code around in
elf64-ppc.c and ppc64elf.em to avoid that problem.
Another problem fixed here is that --gc-sections parses .eh_frame
early, and the existing machinery allows only one go at parsing the
.eh_frame sections. That resulted in the linker generated .eh_frame
CIEs not being merged and no .eh_frame_hdr index entries for those
FDEs. It turns out that all the info from parsing .eh_frame is
attached to the section, so order of parsing isn't important, and
after parsing sec_info_type being set will prevent a section being
parsed again. At least, when parsing doesn't hit an error. So there
isn't really any need for "parsed_eh_frame". "merge_cies" is also
redundant, which means _bfd_elf_{begin,end}_eh_frame_parsing can also
disappear.
bfd/
* elf-bfd.h (struct eh_frame_hdr_info): Delete merge_cies and
parsed_eh_frames.
(_bfd_elf_begin_eh_frame_parsing): Delete.
(_bfd_elf_end_eh_frame_parsing): Delete.
* elf-eh-frame.c (_bfd_elf_begin_eh_frame_parsing): Delete.
(_bfd_elf_end_eh_frame_parsing): Delete.
(_bfd_elf_parse_eh_frame): Don't test parsed_eh_frame. Test
!info->relocatable in place of merge_cies.
* elflink.c (bfd_elf_gc_sections, bfd_elf_discard_info): Adjust.
* elf64-ppc.c (glink_eh_frame_cie): Pad to multiple of 8.
(ppc64_elf_size_stubs): Likewise pad stub FDE.
(ppc64_elf_build_stubs): Move code setting glink .eh_frame to..
(ppc64_elf_size_stubs): ..here and..
(ppc64_elf_finish_dynamic_sections): ..here.
ld/
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_after_allocation): Call
bfd_elf_discard_info after generating glink .eh_frame. Delete
redundant test on ppc64_elf_setup_section_lists status.
2014-08-21 Tony Wang <tony.wang@arm.com>
* elf32-arm.c (elf32_arm_final_link_relocate): Implement
the veneer routine for R_ARM_THM_JUMP19.
(arm_type_of_stub): Add conditional clause for R_ARM_THM_JUMP19
(elf32_arm_size_stub): Ditto.
ld/testsuite/ChangeLog
2014-08-21 Tony Wang <tony.wang@arm.com>
* ld-arm/jump-reloc-veneers-cond.s: New test.
* ld-arm/farcall-cond-thumb-arm.s: Ditto.
* ld-arm/jump-reloc-veneers-cond-short.d: Expected output
for target without a veneer generation.
* ld-arm/jump-reloc-veneers-cond-long.d: Expected output
for target with a veneer generation.
* ld-arm/farcall-cond-thumb-arm.d: Expected output for
inter working veneer generation.
* ld-arm/arm-elf.exp: Add tests for conditional branch veneer.
bfd/
PR ld/17277
* elf32-arm.c (elf32_arm_check_relocs): Increment P->pc_count for
all reloc types with pc_relative set in the howto, not just for
R_ARM_REL32 and R_ARM_REL32_NOI.
(allocate_dynrelocs_for_symbol): Update comment.
(elf32_arm_gc_sweep_hook): For all reloc types with pc_relative
set in the howto, set call_reloc_p and may_need_local_target_p but
not may_become_dynamic_p; not only for R_ARM_REL32 and R_ARM_REL32_NOI.
(elf32_arm_check_relocs): Likewise.
ld/testsuite/
PR ld/17277
* ld-arm/pcrel-shared.s: New file.
* ld-arm/pcrel-shared.rd: New file.
* ld-arm/arm-elf.exp (armelftests_common): Add it.
At the moment it is possible to configure binutils for these triples
but the resulting linker defaults to little endian with huge numbers
of testsuite failures, which on the face of it does not appear to make
much sense.
This patch makes the behaviour similar to armeb-elf and the testsuite
is clean.
bfd/ChangeLog:
2014-08-20 Will Newton <will.newton@linaro.org>
* config.bfd: Default armeb-*-eabi* to big endian.
ld/ChangeLog:
2014-08-20 Will Newton <will.newton@linaro.org>
* configure.tgt: Default armeb-*-eabi* to big endian.
addresses outside of the 32-bit range before memory exhaustion. This
results in a higher entropy implementation of ASLR when used with the
DYNAMIC_BASE flag.
* include/coff/pe.h: Add HIGH_ENTROPY_VA flag
* ld/emultempl/pep.em: Add --high-entropy-va switch
* ld/ld.texinfo: Document the --high-entropy-va switch
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
PR 17287
bfd/
* elflink.c (on_needed_list): Only consider libraries that have
been loaded.
ld/
* ld.texinfo (--as-needed): Clarify that references from libraries
must be from needed libraries.
ld/testsuite/
* ld-plugin/needed3.c: New file.
* ld-elf/shared.exp: Add needed3 test.
Presents .eh_frame input sections to the optimisation machinery in
elf-eh-frame.c in the order they are given by the linker script.
PR 16563
bfd/
* elflink.c (bfd_elf_discard_info): Process .eh_frame and .stab
in the order they are mapped to output sections.
ld/
* ldlang.c (map_head_is_link_order): Rename from
stripped_excluded_sections.
(lang_clear_os_map): New function, extracted from..
(strip_excluded_output_sections): ..here.
* ldlang.h (lang_clear_os_map): Declare.
* ldwrite.c (ldwrite): Call lang_clear_os_map.
* emultempl/sh64elf.em (sh64_elf_${EMULATION_NAME}_after_allocation):
Likewise.
This also makes --enable-plugins default to on for hosts that can
support plugins, so we have consistent lto toolchain support. The
ACX_LARGEFILE moves aren't strictly necessary, but are harmless and
will be necessary if plugin support is extended to more hosts via
libtool's dlopen support. I started down that path then decided it
was more work than I was interested in doing. (ACX_LARGEFILE invokes
AC_PLUGINS.)
config/
* plugins.m4: Test for dlfcn.h or windows.h here to set default
for --enable-plugins. Report error if someone tries to enable
plugins on a host we don't support.
bfd/
* configure.ac: Delete redundant plugin related checks.
* configure: Regenerate.
binutils/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* configure: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Move AC_PROG_CC and other macros earlier. Delete
plugin checks now done in config/plugins.m4.
* config.in: Regenerate.
* configure: Regenerate.
The main aim of this change was to have non_ir_ref set correctly on
new indirect symbols. I could have added a "copy" param to the "notice"
function, so that indirect symbols could be created in plugin_notice,
but it seemed cleaner to create indirect syms earlier and pass them
rather than "string" to "notice".
include/
* bfdlink.h (struct bfd_link_callbacks <notice>): Remove "string"
param, add "inh".
bfd/
* coff-aux.c (coff_m68k_aux_link_add_one_symbol): Only call "notice"
here when not calling the generic add_symbol function. Formatting.
Correct handling of indirect symbols. Update notice call.
* elflink.c (_bfd_elf_notice_as_needed): Update notice call.
* linker.c (_bfd_generic_link_add_one_symbol): Create indirect
symbols early. Update notice call. Add comments regarding weak
symbols vs. indirect.
ld/
* ldmain.c (notice): Update args.
* plugin.c (plugin_notice): Likewise. Follow warning sym link.
Handle new indirect symbol.
* lib/ld-lib.exp (check_lto_fat_available): New.
(check_lto_available): Remove -ffat-lto-objects test.
* ld-plugin/lto.exp: Use [list ] rather than { } to set up list
variables, allowing substition of vars. Set lto_fat and plug_opt
and add to various tests.
Override the default value of 0x0000 defined in
TEXT_START_ADDR to avoid linux executables to be mapped
at zero page.
ld/
* emulparams/elf32or1k_linux.sh (TEXT_START_ADDR): Increase from
0x0 to first page boundary at 0x2000.
Relocations against .got.plt section may not be in the same order as
entries in PLT section. It is incorrect to assume that the Ith reloction
index against .got.plt section always maps to the (I + 1)th entry in PLT
section. This patch matches the .got.plt relocation offset/index in PLT
entry against the index in .got.plt relocation table. It only checks
R_*_JUMP_SLOT and R_*_IRELATIVE relocations. It ignores R_*_TLS_DESC
and R_*_TLSDESC relocations since they have different PLT entries.
bfd/
PR binutils/17154
* elf32-i386.c (elf_i386_plt_sym_val): Only match R_*_JUMP_SLOT
and R_*_IRELATIVE relocation offset with PLT entry.
* elf64-x86-64.c (elf_x86_64_plt_sym_val): Likewise.
(elf_x86_64_plt_sym_val_offset_plt_bnd): New.
(elf_x86_64_get_synthetic_symtab): Use it.
ld/testsuite/
PR binutils/17154
* ld-ifunc/pr17154-i386.d: New file.
* ld-ifunc/pr17154-x86-64.d: Likewise.
* ld-ifunc/pr17154-x86.s: Likewise.
* ld-x86-64/bnd-ifunc-2.d: Likewise.
* ld-x86-64/bnd-ifunc-2.s: Likewise.
* ld-x86-64/mpx.exp: Run bnd-ifunc-2.
* ld-x86-64/tlsdesc-nacl.pd: Updated.
* ld-x86-64/tlsdesc.pd: Likewise.
Commit e1f987424b changed how
next_tls_desc_index was set up. This patch updates
elf_i386_compute_jump_table_size to use elf.srelplt->reloc_count
instead of next_tls_desc_index.
bfd/
PR ld/17057
* elf32-i386.c (elf_i386_compute_jump_table_size): Replace
next_tls_desc_index with elf.srelplt->reloc_count.
ld/testsuite/
PR ld/17057
* ld-i386/i386.exp: Run pr17057.
* ld-i386/pr17057.d: New file.
* ld-i386/pr17057.s: Likewise.
Specify -T relocs.ld for emit-relocs-local-addend.d to be consistent
will all other emit-relocs* testcases
ld/testsuite/
* ld-aarch64/emit-relocs-local-addend.d: Use target linker script.
is_inconsistent_linkonce_section makes an assumption that section name
that starts with ".gnu.linkonce.prop." has one more dot in its suffix.
However gas generates such section name by insertion of "prop." right
after ".gnu.linkonce." part of the name of the original section. So, for
section named ".gnu.linkonce.this_module" corresponding property section
name does not satisfy the assumption. Such section names are common in
linux modules. This bug was exposed by the patch "a35d5e8 Fix alignment
for the first section frag on xtensa", that makes gas produce property
section for each section that has ".align" directive in it.
Use suffix that immediately follows ".gnu.linkonce.prop." when there are
no more dots following it.
2014-07-10 Max Filippov <jcmvbkbc@gmail.com>
ld/
* emultempl/xtensaelf.em (is_inconsistent_linkonce_section):
correctly handle missing dot in section name after
".gnu.linkonce.prop.".
With this change all gas and most ld tests pass when configured for
arm-linux. It doesn't look like these configurations have been
tested in a long time but this attempts to stem the bit-rot slightly.
gas/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* gas/arm/bl-local-2.d: Only enable the test on EABI and
NaCl configurations.
* gas/arm/bl-local-v4t.d: Likewise.
* gas/arm/blx-local.d: Likewise.
* gas/arm/branch-reloc.d: Likewise.
ld/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* ld-arm/arm-elf.exp (armelftests_nonacl): Move Cortex-A8 fix
tests, IFUNC tests and other EABI requiring tests to...
(armeabitests_nonacl): ...here.
* ld-arm/arm-app-abs32.d: Loosen regex for architecture type
to allow test to pass on configurations without an attributes
section.
* ld-arm/arm-app.d: Likewise.
* ld-arm/arm-lib-plt32.d: Likewise.
* ld-arm/arm-lib.d: Likewise.
* ld-arm/arm-static-app.d: Likewise.
* ld-arm/armthumb-lib.d: Likewise.
* ld-arm/cortex-a8-far.d: Likewise.
* ld-arm/farcall-mixed-app.d: Likewise.
* ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* ld-arm/farcall-mixed-lib.d: Likewise.
* ld-arm/mixed-app-v5.d: Likewise.
* ld-arm/mixed-app.d: Likewise.
* ld-arm/mixed-lib.d: Likewise.
* ld-arm/tls-app.d: Likewise.
* ld-arm/tls-descrelax-be32.d: Likewise.
* ld-arm/tls-descrelax.d: Likewise.
* ld-arm/tls-descseq.d: Likewise.
* ld-arm/tls-gdesc-got.d: Likewise.
* ld-arm/tls-gdesc.d: Likewise.
* ld-arm/tls-gdierelax.d: Likewise.
* ld-arm/tls-gdierelax2.d: Likewise.
* ld-arm/tls-gdlerelax.d: Likewise.
* ld-arm/tls-lib-loc.d: Likewise.
* ld-arm/tls-lib.d: Likewise.
* ld-arm/tls-thumb1.d: Likewise.
ARM doesn't support non-PIC shared libraries so don't run those
tests.
ld/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* ld-elfvers/vers.exp: Set pic to yes for ARM targets.
Increase the maximum page size to 64kB and align the TEXT_START_ADDR
to a 64kB boundary. This brings AArch32 in line with AArch64 and
improves compatability under certain conditions.
bfd/ChangeLog:
2014-07-08 Will Newton <will.newton@linaro.org>
* elf32-arm.c (ELF_MAXPAGESIZE): Increase the default
value to 64kB and remove custom setting for NaCl.
ld/ChangeLog:
2014-07-08 Will Newton <will.newton@linaro.org>
* emulparams/armelf_linux.sh (TEXT_START_ADDR): Increase
alignment to 64kB boundary.
ld/testsuite/ChangeLog:
2014-07-08 Will Newton <will.newton@linaro.org>
* ld-arm/arm-lib.ld: Increase MAXPAGESIZE value to
match bfd.
* ld-arm/cortex-a8-fix-bl-rel-plt.d: Update offsets to
take into account increased segment alignment.
* ld-arm/ifunc-gdesc.r: Likewise.
* ld-arm/tls-lib.d: Likewise.
This fixes a problem seen on powerpc64le ELFv2 when creating a
function symbol alias with ld --defsym. st_other needs to be copied
from the source symbol to the alias in order to set up the local entry
offset for the alias. I decided to make this change in the generic
ELF code rather than in elf64-ppc.c since it looks like other targets
that use st_other bits might benefit too.
bfd/
* elflink.c (_bfd_elf_copy_link_hash_symbol_type): Copy st_other
bits from source to dest.
* linker.c (_bfd_generic_copy_link_hash_symbol_type): Update comment.
* targets.c (struct bfd_target <_bfd_copy_link_hash_symbol_type>):
Likewise.
* bfd-in2.h: Regenerate.
ld/testsuite/
* ld-powerpc/defsym.s, * ld-powerpc/defsym.d: New test.
* ld-powerpc/powerpc.exp: Run it.
Objects built with -fno-fat-lto-objects (the default for gcc-4.9) have
no normal symbols, except things like __gnu_lto_slim. These useless
symbols are the ones put into the archive index, and of course nothing
references them so no objects are extracted by the linker. Running
ar with --plugin changes ar behaviour to put the lto symbols into the
archive index.
PR 17112
* ld-plugin/lto.exp: When building liblti-11.a, pass
--plugin path_to_gcc/liblto_plugin.so to ar.
toolchain that just contains the binutils - ie without a compiler.
* lib/ld-lib.exp (check_lto_available): Check that a compiler is
available before testing for LTO support.
Various ld-elf/shared.exp and ld-plugin/lto.exp tests simply appended
the testsuite -B options intended to force gcc use the linker under test.
This fails if $CC itself has -B options, as when setting CC to run gcc
out of a build directory. Net result is that tests were run using
the gcc build dir collect-ld.
* config/default.exp: Don't make tmpdir/gas. Put as symlink into
tmpdir/ld.
(gcc_gas_flag, gcc_ld_flag): Delete.
(gcc_B_opt, ld_L_opt): New globals.
ld-elf/shared.exp: Remove all refs to gcc_gas_flag and gcc_ld_flag.
ld-plugin/lto.exp: Likewise.
lib/ld-lib.exp (run_host_cmd): Add gcc_B_opt and ld_L_opt here.
(ld_simple_link): Remove -B handling now that this is done in
run_host_cmd. Simplify.
(default_ld_compile): Simplify.
(check_lto_available): Use run_host_cmd_yesno.
(check_lto_shared_available): Likewise.
libdummy.a is used to make run_cc_link_tests compile objects and
archive them. libdummy.a isn't used. What we're really doing is
preventing a final link. So do that directly.
* lib/ld-lib.exp (run_ld_link_tests): Stop after assembling objects
if binfile is empty.
(run_ld_link_exec_tests, run_cc_link_tests): Likewise. Tidy
status checks.
* ld-plugin/lto.exp: Don't use libdummy.a trick to compile objects.
Instead use an empty output file.
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
When a shared library appears within --start-group/--end-group ld may
only discover a need for loading the library on the second or
subsequent pass over archive libraries, as more objects are extracted.
ld/
PR 17068
* ldlang.c (load_symbols): Always check flags.reload.
(open_input_bfds): Always reload --as-needed shared libraries,
not just when rescanning.
* ldlang.h (struct lang_input_statement_flags): Update reload comment.
* plugin.c (plugin_should_reload): Assume shared library arg.
* plugin.h (plugin_should_reload): Update comment.
ld/testsuite
* ld-elf/pr17068.s: New.
* ld-elf/pr17068a.s: New.
* ld-elf/pr17068b.s: New.
* ld-elf/pr17068c.s: New.
* ld-elf/pr17068d.s: New.
* ld-elf/pr17068e.s: New.
* ld-elf/pr17068ez.s: New.
* ld-elf/elf.exp: Run new test.
doesn't always mean you need to define a function symbol on plt code.
If all references are in read-write sections, then using dynamic relocs
is OK.
bfd/
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Clear
pointer_equality_needed when !readonly_dynrelocs.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Likewise.
ld/testsuite/
* ld-powerpc/ambiguousv1.d: Match symbol table too.
* ld-powerpc/ambiguousv2.d: Likewise.
* ld-powerpc/ambiguousv1b.d: New.
* ld-powerpc/ambiguousv2b.d: New.
* ld-powerpc/powerpc.exp: Run new tests.
The undefined function symbols (with non-zero value) on global entry
stubs are discarded by objdump when disassembling, so give objdump
another symbol to mark the stubs.
Also fixes a couple of bugs:
- entry_section was set to .opd for ELFv2, which meant a hard error
rather than a warning when _start wasn't defined.
- global entry stubs were not built if they were the only type of
stub in an executable.
bfd/
* elf64-ppc.c (ppc_stub_type): Add ppc_stub_global_entry.
(struct ppc_link_hash_table): Increase size of stub_count array.
(build_global_entry_stubs): Emit symbol on global entry stub.
(ppc64_elf_build_stubs): NULL check htab->brlt. Add global entry
stub stats.
ld/
* emultempl/ppc64elf.em (stub_added): Delete.
(gld${EMULATION_NAME}_finish): Call ppc64_elf_build_stubs even when
none of the usual stubs have been added. Only change entry_section
for ELFv1.
sys/param.h on recent versions of powerpc glibc ends up including
asm/elf.h via asm/sigcontex.h. asm/elf.h defines R_PPC_* and R_PPC64_*
macros, which clash with our include/elf/ppc.h and include/elf/ppc64.h.
It turns out that no current source uses LD_PATHMAX, so there is no
need for limits.h or sys/param.h, except for one occurrence of UINT_MAX.
I don't have a quarrel with limits.h, but it seems unnecessary just
for UINT_MAX.
* sysdep.h: Don't include limits.h and sys/param.h. Don't
include unistd.h twice.
(LD_PATHMAX): Don't define.
* ldlang.c (lang_common): Don't use UINT_MAX.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
inserted. This is for compatibility with other, non-GNU tools. Deterministic
binaries can still be created by using the new --no-insert-timestamp command line
option.
* emultempl/pe.em: Initialise insert_timestamp to true.
Add a --no-insert-timestamp command line option.
* emultempl/pep.em: Likewise.
* ld.texinfo: Document that --insert-timestamp is enabled by
default and that it now has an inverse command line option.
* NEWS: Mention the new behaviour.
* Makefile.am (ALL_EMULATION_SOURCES): Move ei386pep.c from
here...
(ALL_64_EMULATION_SOURCES): ... to here.
(ALL_EMUL_EXTRA_OFILES): Move pep-dll.o from here...
(ALL_64_EMUL_EXTRA_OFILES): New. ... to here.
* configure.in (EMUL_EXTRA_OFILES): Include
ALL_64_EMUL_EXTRA_OFILES when making a 64-bit enabled build.
* Makefile.in: Regenerate.
* configure: Regenerate.
Addition of DF_STATIC_TLS in eea6dad2 results in the addition of
flags to the dynamic section, which in turn changes these addresses.
Fix them up to match their new positions.
ld/testsuite/Changelog:
2014-06-24 Kyle McMartin <kyle@redhat.com>
* ld-arm/tls-gdierelax2.d: Fix expected offsets.
Combining TLS descriptors and GNU indirect functions in the same
object could lead to assertions or multiple dynamic relocations
for the same GOT slot. Fix the bookkeeping so this doesn't happen.
This allows building and make checking glibc with -mtls-dialect=gnu2.
bfd/ChangeLog:
2014-06-16 Will Newton <will.newton@linaro.org>
* elf32-arm.c (elf32_arm_allocate_plt_entry): Increment
htab->next_tls_desc_index in the non-IPLT case.
Calculate GOT offset correctly for the non-IPLT case.
(allocate_dynrelocs_for_symbol): Don't increment
htab->next_tls_desc_index here.
ld/testsuite/ChangeLog:
2014-06-16 Will Newton <will.newton@linaro.org>
* ld-arm/arm-elf.exp: Add ifunc-gdesc test.
* ld-arm/ifunc-gdesc.r: New file.
* ld-arm/ifunc-gdesc.s: Likewise.
* ld-arm/ifunc-gdesc.ver: Likewise.
and fix more nds32 dependencies.
* scripttempl/elf.sc: Edit out __rela_iplt symbol assignments from
.rel sections, and __rel_iplt from .rela sections.
* scripttempl/nds32elf.sc: Likewise.
* Makefile.am (ends32*.c): Depend on nds32elf.sc.
* Makefile.in: Regenerate.
