Since GOTOFF relocations against IFUNC symbols must go through PLT,
set PLT reference count to 1 for GOTOFF relocation.
bfd/
PR ld/27998
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Count PLT for GOTOFF
relocation against IFUNC symbols.
(_bfd_x86_elf_adjust_dynamic_symbol): Likewise.
ld/
PR ld/27998
* testsuite/ld-i386/i386.exp: Run PR ld/27998 tests.
* testsuite/ld-i386/pr27998a.d: New file.
* testsuite/ld-i386/pr27998a.s: Likewise.
* testsuite/ld-i386/pr27998b.d: Likewise.
* testsuite/ld-i386/pr27998b.s: Likewise.
These dirs don't use automake, so use AC_CONFIG_MACRO_DIRS to specify
../config as a search dir for m4 macros. This allows removal of a lot
of hand-written m4_include's from acinclude.m4 files, and simplifies
use of `aclocal` or `autoreconf` as manual -I is not needed.
I get this when building with gcc 11:
CC common/common_libcommon_a-sim-load.o
In file included from /home/simark/src/binutils-gdb/sim/common/sim-n-bits.h:27,
from /home/simark/src/binutils-gdb/sim/common/sim-bits.c:259,
from /home/simark/src/binutils-gdb/sim/common/sim-bits.h:599,
from /home/simark/src/binutils-gdb/sim/common/sim-basics.h:122,
from /home/simark/src/binutils-gdb/sim/common/sim-load.c:30:
/home/simark/src/binutils-gdb/sim/common/sim-n-endian.h:39:27: error: 'offset_16' defined but not used [-Werror=unused-function]
39 | #define offset_N XCONCAT2(offset_,N)
| ^~~~~~~
/home/simark/src/binutils-gdb/sim/../include/symcat.h:23:26: note: in definition of macro 'CONCAT2'
23 | #define CONCAT2(a,b) a##b
| ^
/home/simark/src/binutils-gdb/sim/common/sim-n-endian.h:39:18: note: in expansion of macro 'XCONCAT2'
39 | #define offset_N XCONCAT2(offset_,N)
| ^~~~~~~~
/home/simark/src/binutils-gdb/sim/common/sim-n-endian.h:138:1: note: in expansion of macro 'offset_N'
138 | offset_N (unsigned_N *x,
| ^~~~~~~~
offset_N uses INLINE_SIM_ENDIAN, which uses UNUSED to put the "unused"
attribute. However, it appears after the function's return type, which
seems to make it not apply to the function. Moving it to before the
return type fixes the error.
Change all instances found in that file.
sim/common/ChangeLog:
* sim-inline.h: Move UNUSED before TYPE.
Change-Id: Ide20106683ed7a9ebf35d484dabf70b309cb1ba6
Only one arch uses this currently, but others could too. By moving
it up to the common checks, it'll also let us simplify the moxie code
significantly.
Use the same basic names as the common sim inline logic so we can
merge the two. We don't do that here, just prepare for it.
The common code seems to be based on the ppc version but with slightly
different names as it was cleaned up & generalized. I *think* these
concepts are the same, so binding them together is OK, but maybe I'm
misreading them. If so, can always tweak them later.
REVEAL_MODULE -> H_REVEALS_MODULE
INLINE_MODULE -> C_REVEALS_MODULE
Change
ld: warning: creating DT_TEXTREL in a PIE
to
ld: warning: creating DT_TEXTREL in a PDE
on PDE.
bfd/
* elflink.c (bfd_elf_final_link): Correct DT_TEXTREL warning in
PDE.
ld/
* testsuite/ld-x86-64/textrel-1.err: New file.
* testsuite/ld-x86-64/textrel-1a.s: Likewise.
* testsuite/ld-x86-64/textrel-1b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run textrel-1 tests.
1. Skip am33_2.0-*-* hppa*-*-hpux* mn10300-*-* since assembly source file
for the HPPA assembler is renamed and modifed by sed. mn10300 has RELA
relocations in .note.gnu.property section which elf_parse_notes doesn't
support.
2. Pass --generate-missing-build-notes=no to assembler.
3. Allow other note sections for xtensa.
* testsuite/ld-elf/property-and-1.d: Skip am33_2.0, hppa-hpux
and mn10300.
Pass --generate-missing-build-notes=no to assembler. Allow
other note sections for xtensa.
* testsuite/ld-elf/property-and-2.d: Likewise.
* testsuite/ld-elf/property-and-3.d: Likewise.
* testsuite/ld-elf/property-and-4.d: Likewise.
* testsuite/ld-elf/property-or-1.d: Likewise.
* testsuite/ld-elf/property-or-2.d: Likewise.
* testsuite/ld-elf/property-or-3.d: Likewise.
* testsuite/ld-elf/property-or-4.d: Likewise.
A shift count exceeding the size of the value is undefined behaviour,
and so is negating a signed LONG_MIN.
* config/tc-z80.c (signed_overflow, unsigned_overflow): Avoid UB.
The test contained an expression that can't be evaluated unless
expressions are 64-bit.
* testsuite/gas/ppc/raw.s: Use 0 as pli constant.
* testsuite/gas/ppc/raw.d: Update to suit.
In function 'strncpy',
inlined from 'display_debug_lines_decoded' at /home/alan/src/binutils-gdb/binutils/dwarf.c:5434:5,
inlined from 'display_debug_lines' at /home/alan/src/binutils-gdb/binutils/dwarf.c:5567:21:
/usr/include/bits/string_fortified.h:95:10: error: '__builtin_strncpy' specified bound 36 equals destination size [-Werror=stringop-truncation]
No need for strncpy here, the string being copied always fits the
destination buffer.
* dwarf.c (display_debug_lines_decoded): Use memcpy rather than
strncpy when trimming file name length to MAX_FILENAME_LENGTH.
Don't make an unnecessary copy when length is good.
This patch updates the gdb test to use the new bgetar and bnstarl mnemonics
introduced in commit 5a4037661b. The test
previously used the bctar and bctarl mnemonics.
gdb/testsuite/ChangeLog
2021-06-17 Carl Love <cel@us.ibm.com>
* gdb.arch/powerpc-power8.exp(bctar, bctarl): Update mnemonics
to bgetar and bgetarl.
* gdb.arch/powerpc-power8.s((bctar, bctarl): Update comments
for mnemonics to bgetar and bnstarl.
Move these options up to the common dir so we only test & export
them once across all ports. It also enables -Werror usage on the
common files we've been pulling out of arch subdirs.
Implement GNU_PROPERTY_UINT32_AND_XXX/GNU_PROPERTY_UINT32_OR_XXX:
https://sourceware.org/pipermail/gnu-gabi/2021q1/000467.html
1. GNU_PROPERTY_UINT32_AND_LO..GNU_PROPERTY_UINT32_AND_HI
#define GNU_PROPERTY_UINT32_AND_LO 0xb0000000
#define GNU_PROPERTY_UINT32_AND_HI 0xb0007fff
A bit in the output pr_data field is set only if it is set in all
relocatable input pr_data fields. If all bits in the the output
pr_data field are zero, this property should be removed from output.
If the bit is 1, all input relocatables have the feature. If the
bit is 0 or the property is missing, the info is unknown.
2. GNU_PROPERTY_UINT32_OR_LO..GNU_PROPERTY_UINT32_OR_HI
#define GNU_PROPERTY_UINT32_OR_LO 0xb0008000
#define GNU_PROPERTY_UINT32_OR_HI 0xb000ffff
A bit in the output pr_data field is set if it is set in any
relocatable input pr_data fields. If all bits in the the output
pr_data field are zero, this property should be removed from output.
If the bit is 1, some input relocatables have the feature. If the
bit is 0 or the property is missing, the info is unknown.
bfd/
* elf-properties.c (_bfd_elf_parse_gnu_properties): Handle
GNU_PROPERTY_UINT32_AND_LO, GNU_PROPERTY_UINT32_AND_HI,
GNU_PROPERTY_UINT32_OR_LO and GNU_PROPERTY_UINT32_OR_HI.
(elf_merge_gnu_properties): Likewise.
binutils/
* readelf.c (print_gnu_property_note): Handle
GNU_PROPERTY_UINT32_AND_LO, GNU_PROPERTY_UINT32_AND_HI,
GNU_PROPERTY_UINT32_OR_LO and GNU_PROPERTY_UINT32_OR_HI.
include/
* elf/common.h (GNU_PROPERTY_UINT32_AND_LO): New.
(GNU_PROPERTY_UINT32_AND_HI): Likewise.
(GNU_PROPERTY_UINT32_OR_LO): Likewise.
(GNU_PROPERTY_UINT32_OR_HI): Likewise.
ld/
* testsuite/ld-elf/property-and-1.d: New file.
* testsuite/ld-elf/property-and-1.s: Likewise.
* testsuite/ld-elf/property-and-2.d: Likewise.
* testsuite/ld-elf/property-and-2.s: Likewise.
* testsuite/ld-elf/property-and-3.d: Likewise.
* testsuite/ld-elf/property-and-3.s: Likewise.
* testsuite/ld-elf/property-and-4.d: Likewise.
* testsuite/ld-elf/property-and-empty.s: Likewise.
* testsuite/ld-elf/property-or-1.d: Likewise.
* testsuite/ld-elf/property-or-1.s: Likewise.
* testsuite/ld-elf/property-or-2.d: Likewise.
* testsuite/ld-elf/property-or-2.s: Likewise.
* testsuite/ld-elf/property-or-3.d: Likewise.
* testsuite/ld-elf/property-or-3.s: Likewise.
* testsuite/ld-elf/property-or-4.d: Likewise.
* testsuite/ld-elf/property-or-empty.s: Likewise.
For the ports that still don't build with -Werror, rather than disable
the flag at configure time, do it at make time. This will allow us to
unify these tests in the common sim configure script.
As we merge settings from subdirs into the common configure, we
sometimes need to keep the settings working in both dirs. Create
a makefile fragment to pass them down so we don't have to run the
checks twice. For now, the file is empty, but we'll start moving
logic in shortly.
When the same such construct is used multiple times in a source file,
there's still no need to emit a separate symbol each time. Under the
assumption that there won't be many of these, use a simple array
lookup method to record previously used symbols.
The sim-basics.h is too big and includes too many things. This leads
to some arch's sim-main.h having circular loop issues with defs, and
makes it hard to separate out common objects from arch-specific defs.
By splitting up sim-basics.h and killing off sim-main.h, it'll make
it easier to separate out the two.
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified). If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.
Only two arches today set the default value (bpf & mips). We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection. This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice. If an input program is used
though, we'll still switch the default to that. This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.
For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls. This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.
With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.
The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too. We'll rely on the input selecting the endian, or
make the user decide.
This define is used for a particular target and depends on the
simulated CPU hardware. It has no relation to the host CPU that
the sim is running on. So rename the common "PAGE_SIZE" here to
better reflect its usage and avoid conflicts with system headers.
Because SIGTTOU is sent to the whole process instead of to a specific
thread, consuming a pending SIGTTOU in the destructor of
scoped_ignore_sigttou could consume a SIGTTOU signal raised due to
actions done by some other thread. Simply avoid sigtimedwait in
scoped_ignore_sigttou, thus plugging the race. This works because we
know that when the thread writes to the terminal and the signal is
blocked, the kernel does not raise the signal at all.
Tested on GNU/Linux, Solaris 11 and FreeBSD.
gdb/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
* scoped_ignore_signal.h (scoped_ignore_signal): Add
ConsumePending template parameter.
(scoped_ignore_signal::~scoped_ignore_signal): Skip calling
sigtimedwait if ConsumePending is false.
(scoped_ignore_sigpipe): Initialize with ConsumePending=true.
* scoped_ignore_sigttou.h (scoped_ignore_sigttou)
<m_ignore_signal>: Initialize with ConsumePending=false.
Change-Id: I92f754dbc45c45819dce2ce68b8c067d8d5c61b1
On x86-64, function pointers in executable for external funtions may be
resolved to their PLT entries in executable. If it happens, function
pointers of protected funtions in shared libraries must be resolved to
the PLT entries in executable, not addresses of protected funtions in
shared libraries.
PR ld/27973
* testsuite/ld-x86-64/x86-64.exp: Run protected function tests.
* testsuite/ld-x86-64/protected-func-1.h: New file.
* testsuite/ld-x86-64/protected-func-1a.s: Likewise.
* testsuite/ld-x86-64/protected-func-1b.c: Likewise.
gold has had this option for many years. Not having this option caused
some confusion to users. The help message clarifies the default state.
ld/
* ldlex.h (enum option_values): Add OPTION_NO_PIE.
* lexsup.c (struct ld_options): Add -no-pie.
(parse_args): Handle -no-pie.
* ld.texi: Document -no-pie.
The problem with using signal(...) to temporarily ignore a signal, is
that that changes the the signal disposition for the whole process.
If multiple threads do it at the same time, you have a race.
Fix this by using sigprocmask + sigtimedwait to implement the ignoring
instead, if available, which I think probably means everywhere except
Windows nowadays. This way, we only change the signal mask for the
current thread, so there's no race.
Change-Id: Idfe3fb08327ef8cae926f3de9ee81c56a83b1738
gdbsupport/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
* scoped_ignore_signal.h
(scoped_ignore_signal::scoped_ignore_signal)
[HAVE_SIGPROCMASK]: Use sigprocmask to block the signal instead of
changing the signal disposition for the whole process.
(scoped_ignore_signal::~scoped_ignore_signal) [HAVE_SIGPROCMASK]:
Use sigtimedwait and sigprocmask to flush and unblock the signal.
We currently have scoped_restore_sigttou and scoped_restore_sigpipe
doing basically the same thing -- temporarily ignoring a specific
signal.
This patch introduce a scoped_restore_signal type that can be used for
both. This will become more important for the next patch which
changes how the signal-ignoring is implemented.
scoped_restore_sigpipe is a straight alias to
scoped_restore_signal<SIGPIPE> on systems that define SIGPIPE, and an
alias to scoped_restore_signal_nop (a no-op version of
scoped_restore_signal) otherwise.
scoped_restore_sigttou is not a straight alias because it wants to
check the job_control global.
gdb/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
* gdbsupport/scoped_ignore_signal.h: New.
* compile/compile.c: Include gdbsupport/scoped_ignore_signal.h
instead of <signal.h>. Don't include <unistd.h>.
(scoped_ignore_sigpipe): Remove.
* gdbsupport/scoped_ignore_sigttou.h: Include gdbsupport/scoped_ignore_signal.h
instead of <signal.h>. Don't include <unistd.h>.
(lazy_init): New.
(scoped_ignore_sigttou): Reimplement using scoped_ignore_signal
and lazy_init.
Change-Id: Ibb44d0bd705e96df03ef0787c77358a4a7b7086c
A following patch will want to use scoped_ignore_sigttou in code
shared between GDB and GDBserver. Move it under gdbsupport/.
Note that despite what inflow.h/inflow.c's first line says, inflow.c
is no longer about ptrace, it is about terminal management. Some
other files were unnecessarily including inflow.h, I guess a leftover
from the days when inflow.c really was about ptrace. Those inclusions
are simply dropped.
gdb/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
* Makefile.in (HFILES_NO_SRCDIR): Remove inflow.h.
* inf-ptrace.c, inflow.c, procfs.c: Don't include "inflow.h".
* inflow.h: Delete, moved to gdbsupport/ under a different name.
* ser-unix.c: Don't include "inflow.h". Include
"gdbsupport/scoped_ignore_sigttou.h".
gdbsupport/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
* scoped_ignore_sigttou.h: New file, moved from gdb/ and renamed.
Change-Id: Ie390abf42c3a78bec6d282ad2a63edd3e623559a
PR 27904
* config/tc-aarch64.c (ldst_lo12_determine_real_reloc_type):
Generate a syntax error message if the reloc qualifier does not
match the instruction's size.
Latest gcc versions are now generating csects instead of .lcomm
for bss symbols.
Some adjustements are needed in order to handle them.
* config/tc-ppc.c (md_begin): Create bss section with dummy
symbol.
(ppc_frob_symbol): Output XTY_CM for bss csects.
(ppc_fix_adjustable): Adjust condition to avoid bss csects.
This test tests passing arguments made of exactly two single-quotes
('') or a single newline character through the --args argument of GDB.
For some reason, GDB adds some extra single quotes when transmitting the
arguments to GDBserver. This produces some FAILs when testing with the
native-extended-gdbserver board:
FAIL: gdb.base/args.exp: argv[2] for one empty (with single quotes)
FAIL: gdb.base/args.exp: argv[2] for two empty (with single quotes)
FAIL: gdb.base/args.exp: argv[3] for two empty (with single quotes)
FAIL: gdb.base/args.exp: argv[2] for one newline
FAIL: gdb.base/args.exp: argv[2] for two newlines
FAIL: gdb.base/args.exp: argv[3] for two newlines
This is documented as PR 27989. Add some appropriate KFAILs.
gdb/testsuite/ChangeLog:
* gdb.base/args.exp: Check target, KFAIL if remote.
(args_test): Add parameter and use it.
Change-Id: I49225d1c7df7ebaba480ebdd596df80f8fbf62f0
All tests in this file append to GDBFLAGS instead of overwriting it,
except the last two. I noticed because when testing with the
native-extended-remote board, it removes the "set sysroot" argument, and
it causes the test to be very long to run, due to big glibc debug info
being read through the remote target.
I think this oddity is due to a race condition between these two
commits:
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=c22261528c50f7760dd6a2e29314662b377eebb4
[2] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=6b8ce727297b1e40738e50f83a75881b290fe6a6
The first one added the two tests. The second one changes the test to
append to GDBFLAGS instead of overwriting it. But the second one was
probably written before the first one was it, so missed the new tests.
Change those two tests to be like the others.
gdb/testsuite/ChangeLog:
* gdb.base/args.exp: Use $old_gdbflags in all tests.
Change-Id: I531276125ecb70e80f52adbd320ebb85b0c8eba0
Use save_vars instead of manually saving/restoring. This ensures that
if anything throws an error, GDBFLAGS will be correctly restored.
Remove the global GDBFLAGS declaration at the top, it's not necessary.
gdb/testsuite/ChangeLog:
* gdb.base/args.exp: Use save_vars.
Change-Id: I3a45e4fc1635ec0212de2415040f91eecaf4a057
Currently, when the focus is on the command window, we disable the
keypad. This means that when the command window has the focus, keys
such as up/down/home/end etc. are not processed by curses, and their
escape sequences go straight to readline.
A side effect of disabling keypad mode is that wgetch no longer
processes mouse escape sequences, with the end result being the mouse
doesn't work, and worse, the raw mouse escape sequences are printed on
the terminal.
This commit makes the TUI command window support the mouse as well, by
always enabling the keypad, and then to avoid losing support for
up/down browsing the command history, home/end/left/right moving the
cursor position, etc., we forward those keys as raw escape sequences
to readline. Note we don't make an effort to pass down to readline
all keys returned by curses, only the common ones that readline
understands by default. Given users can specify their own readline
bindings (inputrc file, bind utility), this approach is good in
practice, though not 100% transparent or perfect.
Note that the patch makes it so that CTLC-L is always passed to
readline even if the command window does not have the focus. It was
simpler to implement that way, and it just seems correct to me. I
don't know of a reason we shouldn't do that.
The patch improves the TUI behavior in a related way. Now we can pass
special keys to readline irrespective of which window has the focus.
First, we try to dispatch the key to a window, via
tui_displatch_ctrl_char. If the key is dispatched, then we don't pass
it to readline. E.g., pressing "up" when you have the source window
in focus results in scrolling the source window, and nothing else. If
however, you press ctrl-del instead, that results in killing the next
word in the command window, no matter which window has has focus.
Before, it would only work if you had the command window in focus.
Similarly, ctrl-left/ctrl-right to move between words, etc.
Similarly, the previous spot where we handled mouse events was
incorrect. It was never reached if the window with focus can't
scroll, which is the case for the command window. Mouse scrolling
affects the window under the mouse cursor, not the window in focus.
We now always try to dispatch mouse events.
One last bit in the patch -- now if we don't recognize the non-8-bit
curses key, then we don't pass it down to readline at all. Before
that would result in bogus characters in the input line.
gdb/ChangeLog:
yyyy-mm-dd Pedro Alves <pedro@palves.net>
* tui/tui-io.c (tui_dispatch_mouse_event): New, factored out from
...
(tui_dispatch_ctrl_char): ... this. Move CTRL-L handling to
tui_getc_1.
(cur_seq, start_sequence): New.
(tui_getc_1): Pass key escape sequences for curses control keys to
readline. Handle mouse and ctrl-l here.
(tui_resize_all): Disable/reenable the keypad if the command
window has the focus too.
* tui/tui-win.c (tui_set_focus_command): Don't change keypad
setting.
* tui/tui.c (tui_rl_other_window): Don't change keypad setting.
Change-Id: Ie0a7d849943cfb47f4a6589e1c73341563740fa9
AIX ld expects the section contents for relocations BFD_RELOC_PPC_TLSM
or BFD_RELOC_PPC64_TLSM to be zero.
Actually, it seems to be the case for all the TLS relocations
generated by AIX assembly but only these two are mandatory.
* config/tc-ppc.c (md_apply_fix): Adjust addend to nullify
section contents for BFD_RELOC_PPC_TLSM or
BFD_RELOC_PPC64_TLSM.
* testsuite/gas/ppc/xcoff-tlsm-32.d: New test.
* testsuite/gas/ppc/xcoff-tlsm-64.d: New test.
* testsuite/gas/ppc/xcoff-tlsm.s: New test.
* testsuite/gas/ppc/aix.exp: Run new tests.
