I clearly screwed up in 6ff00b5e12 ("x86/Intel: correct permitted
operand sizes for AVX512 scatter/gather") giving all AVX512F scatter
insns Dword element size. Update testcases (also their gather parts),
utilizing that there previously were two identical lines each (for no
apparent reason).
Assuming GMSD is a special operand, marked as O_md1, the code:
.set VREG, GMSD
.set REG, VREG
extsw REG, 2
...fails upon attempts to resolve the value of the symbol. This happens
since machine-dependent values are not handled in the giant op switch.
We introduce a custom md_resolve_symbol macro; the ports can use this
macro to customize the behavior when resolve_symbol_value hits O_md
operand.
The ciphers 5,7, and 9 are missing when parsing an assembly
instruction leading to errors when those ciphers are
used.
gas/config
* tc-arc.c (md_assembly): Update strspn string with the
missing ciphers.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
Both forms were missing VexW0 (thus allowing Evex.W=1 to be encoded by
suitable means, which would cause #UD). The memory operand form further
was using the wrong Masking value, thus allowing zeroing-masking to be
encoded for the store form (which would again cause #UD).
I meant to make this change before committing, to let compilers know
the code on the false branch of md_parse_name is dead.
* config/tc-ppc.c (ppc_parse_name): Return void.
* config/tc-ppc.h (md_parse_name): Always true.
(ppc_parse_name): Update prototype.
Allows register names to appear in symbol assignments, so for example
tocp = %r2
mr %r3,tocp
now assembles.
* gas/config/tc-ppc.c (REG_NAME_CNT): Delete, replace uses with
ARRAY_SIZE.
(register_name): Rename to..
(md_operand): ..this. Only handle %reg.
(cr_names): Rename to..
(cr_cond): ..this. Just keep conditions.
(ppc_parse_name): Add mode param. Search both cr_cond and
pre_defined_registers. Handle absolute and register symbol
values here rather than in expr.c:operand().
(md_assemble): Don't special case register name matching in
operands, except to set cr_operand as appropriate.
* gas/config/tc-ppc.h (md_operand): Don't define.
(md_parse_name, ppc_parse_name): Update.
* read.c (pseudo_set): Copy over entire O_register value.
* testsuite/gas/ppc/regsyms.d.
* testsuite/gas/ppc/regsyms.s: New test.
* testsuite/gas/ppc/ppc.exp: Run it.
It might be possible to hit md_end before md_begin is called, don't
segfault if so. Also, remove a useless check.
* gas/config/tc-ppc.c (insn_calloc): Remove needless overflow
check.
(ppc_md_end): Check ppc_hash before deleting. Clear ppc_hash.
Cleaning up the subsym_hash memory is a real pain. Keys and values
entered into the table are quite diverse. In some cases the key is
allocated and thus needs to be freed, in others the key is a const
string. Values are similar, and in some cases not even a string.
Tidy this by inserting a new subsym_ent_t that describes key/value
type. This meant the math_hash table was no longer needed. The patch
also tidies how math functions are called, those that are supposed to
return int now no longer return their value in a float.
* config/tc-tic54x.c (math_hash): Delete.
(subsym_proc_entry): Move earlier, make proc a union, merge with..
(math_proc_entry): ..this. Delete type.
(math_procs): Merge into subsym_procs.
(subsym_ent_t): New. Use this type in subsym_hash..
(stag_add_field_symbols, tic54x_var, tic54x_macro_info): ..here..
(md_begin, subsym_create_or_replace, subsym_lookup): ..and here..
(subsym_substitute): ..and here. Adjust subsym_proc_entry
function calls. Free replacement when not returned.
(subsym_get_arg): Adjust subsym_lookup.
(free_subsym_ent, subsym_htab_create ): New functions, use when
creating subsym_hash.
(free_local_label_ent, local_label_htab_create): Similarly.
(tic54x_remove_local_label): Delete.
(tic54x_clear_local_labels): Simplify.
(tic54x_asg): Use notes obstack to dup strings.
(tic54x_eval): Likewise.
(subsym_ismember): Likewise.
(math_cvi, math_int, math_sgn): Return int.
(tic54x_macro_start): Decrement macro_level before calling as_fatal.
(tic54x_md_end): New function.
* config/tc-tic54h.c (tic54x_md_end): Declare.
(md_end): Define.
Using notes_calloc means all of the string hash table memory should
now be freed before gas exits, even though htab_delete isn't called.
This also means that the hash table free_f and del_f must be NULL,
because freeing notes obstack memory results in all more recently
allocated notes memory being freed too. So hash table resizing won't
free any memory, and will be a little faster. Also, htab_delete won't
do anything (and be quick about it).
Since htab_traverse can also resize hash tables (to make another
traversal faster if the table is largely empty), stop that happening
when only one traversal is done.
* as.h: Reorder hash.h after symbols.h for notes_calloc decl.
* hash.h (str_htab_create): Use notes_calloc. Do not free.
* symbols.c (resolve_local_symbol_values): Don't resize
during hash table traversal.
* config/obj-elf.c (elf_frob_file_after_relocs): Likewise.
* config/tc-ia64.c (ia64_adjust_symtab, ia64_frob_file): Likewise.
* config/tc-nds32.c (nds32_elf_analysis_relax_hint): Likewise.
This allocates entries added to the string hash tables on the notes
obstack, so that at least those do not leak. A followup patch will
switch over the str_hash allocation to notes_calloc, which is why I
haven't implemented deleting all the target string hash tables.
* config/obj-coff-seh.c (get_pxdata_name, alloc_pxdata_item): Use
notes obstack for string hash table entries.
* config/tc-alpha.c (get_alpha_reloc_tag, md_begin): Likewise.
* config/tc-h8300.c (md_begin): Likewise.
* config/tc-ia64.c (dot_rot, dot_pred_rel, dot_alias): Likewise.
* config/tc-nds32.c (nds32_relax_hint): Likewise.
* config/tc-riscv.c (riscv_init_csr_hash): Likewise.
* config/tc-score.c (s3_insert_reg): Likewise.
(s3_build_score_ops_hsh, s3_build_dependency_insn_hsh): Likewise.
* config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
(s7_build_dependency_insn_hsh): Likewise.
* config/tc-tic4x.c (tic4x_asg): Likewise.
The arc opcode hash table has entries that have a realloc'd field.
This doesn't lend itself to obstack allocation, so freeing must be
done with a purpose built hashtab del_f.
* config/tc-arc.c (arc_opcode_free): New function.
(md_begin): Pass the above as del_f to htab_create_alloc.
(arc_md_end): New function.
* config/tc-arc.h (arc_md_end): Declare.
(md_end): Define.
This tidies memory used by the two x86 gas string hash tables before
exiting. I'm using a two-pronged approach, firstly the obvious call
to htab_delete plus telling the libiberty/hashtab.c infrastructure to
free tuples generated by str_hash_insert, and secondly putting the x86
core_optab memory on the notes obstack. It would be possible to free
core_optab memory by using a custom hash table del_f on x86, as I do
for arc, but a later patch will move all the string hash memory to the
notes obstack.
* config/tc-i386.c (md_begin): Use notes_alloc for core_optab.
(386_md_end): New function.
* config/tc-i386.h (386_md_end): Declare.
(md_end): Define.
* hash.h (str_htab_create): Pass free as del_f.
Only inline functions should be defined in hash.h, there's no benefit
in having multiple copies of hash_string_tuple and eq_string_tuple.
Also, use the table alloc_f when allocating tuples to be stored, so
that these functions are usable with different memory allocation
strategies.
* hash.h (struct string_tuple, string_tuple_t): Move earlier.
(string_tuple_alloc): Add table param, allocate using table alloc_f.
(str_hash_insert): Adjust to suit. Call table->free_f when
entry is not used.
(hash_string_tuple, eq_string_tuple): Move to..
* hash.c: ..here.
Currently md_end is typically used for some final actions rather than
freeing memory like other *_end functions. Rename it to md_finish,
and rename target implementation. The renaming of target functions
makes it possible to find them all with "grep md_finish",
eg. md_mips_end is renamed to mips_md_finish, not md_mips_finish.
This patch leaves a number of md_end functions unchanged, those that
either do nothing or deallocate memory, and calls them late.
The idea here is that target maintainers implement md_end functions to
tidy memory, if anyone cares. Freeing persistent memory in gas is
not at all important, except that it can hide more important memory
leaks, those that happen once per some frequent gas operation, amongst
these unimportant memory leaks.
* as.c (main): Rename md_end to md_finish.
* config/tc-alpha.c, * config/tc-alpha.h,
* config/tc-arc.c, * config/tc-arc.h,
* config/tc-arm.c, * config/tc-arm.h,
* config/tc-csky.c, * config/tc-csky.h,
* config/tc-ia64.c, * config/tc-ia64.h,
* config/tc-mcore.c, * config/tc-mcore.h,
* config/tc-mips.c, * config/tc-mips.h,
* config/tc-mmix.c, * config/tc-mmix.h,
* config/tc-msp430.c, * config/tc-msp430.h,
* config/tc-nds32.c, * config/tc-nds32.h,
* config/tc-ppc.c, * config/tc-ppc.h,
* config/tc-pru.c, * config/tc-pru.h,
* config/tc-riscv.c, * config/tc-riscv.h,
* config/tc-s390.c, * config/tc-s390.h,
* config/tc-sparc.c, * config/tc-sparc.h,
* config/tc-tic4x.c, * config/tc-tic4x.h,
* config/tc-tic6x.c, * config/tc-tic6x.h,
* config/tc-v850.c, * config/tc-v850.h,
* config/tc-xtensa.c, * config/tc-xtensa.h,
* config/tc-z80.c, * config/tc-z80.h: Similarly.
* output-file.c (output_file_close): Call md_end.
So that the notes obstack can be used for persistent storage in
parse_args.
* as.c (parse_args): Use notes_alloc and notes_strdup.
(free_notes): New function.
(main): Init notes obstack, and arrange to be freed on exit.
* read.c (read_begin): Don't init notes obstack.
(read_end): Free cond_obstack.
* subsegs.c (subsegs_end): Don't free cond_obstack or notes.
itbl_files seems to be debug code. Get rid of it.
* as.c (struct itbl_file_list): Delete.
(itbl_files): Delete.
(parse_args): Don't keep itbl_files list.
Use notes obstack for dwcfi_hash entries, and free table. Freeing the
table makes memory checkers complain more about "definitely lost"
memory as we've moved some from the "still reachable" category.
That will be fixed with a later patch.
* dw2gencfi.c (get_debugseg_name): Allocate on notes obstack.
(alloc_debugseg_item): Likewise.
(dwcfi_hash_find_or_make): Adjust failure path free.
(cfi_finish): Delete dwfci_hash.
Another case of duplicated hash.h code, the only minor difference
being that macro->format_hash was created with 7 entries vs. str_hash
with 16 entries.
* macro.c (macro_init, define_macro): Use str_htab_create.
(do_formals, define_macro, macro_expand_body): Use str_hash_insert
(macro_expand_body): Use str_hash_find and str_hash_delete.
(delete_macro): Likewise.
(sub_actual, macro_expand, check_macro): Use str_hash_find.
(expand_irp): Use str_htab_create and str_hash_insert.
* macro.h (struct macro_struct): Tidy.
(struct macro_hash_entry, macro_hash_entry_t, hash_macro_entry),
(eq_macro_entry, macro_entry_alloc, macro_entry_find),
(struct formal_hash_entry, formal_hash_entry_t),
(hash_formal_entry, eq_formal_entry, formal_entry_alloc),
(formal_entry_find): Delete.
* config/tc-iq2000.c (iq2000_add_macro): Use str_htab_create
and str_hash_insert.
po_hash code duplicates the str_hash code in hash.h for no good reason.
* read.c (struct po_entry, po_entry_t): Delete.
(hash_po_entry, eq_po_entry, po_entry_alloc, po_entry_find): Delete.
(pop_insert): Use str_hash_insert.
(pobegin): Use str_htab_create.
(read_a_source_file, s_macro): Use str_hash_find.
read_symbol_name mallocs the string it returns. Free it when done.
* read.c (read_symbol_name): Free name on error path.
* config/tc-ppc.c (ppc_GNU_visibility): Free name returned from
read_symbol_name.
(ppc_extern, ppc_globl, ppc_weak): Likewise.
This is mostly a tidy with the aim of being able to free
out_file_name, but it does fix a possible attempt to unlink the output
file twice (not that that matters).
* as.h (keep_it): New global.
* as.c (keep_it): Delete.
(close_output_file): Delete, merged into..
* output-file.c (output_file_close): ..here. Delete parameter.
* output-file.h (output_file_close): Update prototype.
Makes it a little easier to use the notes obstack for persistent
storage.
* as.h (gas_mul_overflow): Define.
* symbols.h (notes_alloc, notes_calloc, notes_memdup),
(notes_strdup, notes_concat, notes_free): Declare.
* symbols.c (notes_alloc, notes_calloc, notes_memdup),
(notes_strdup, notes_concat, notes_free): New functions.
(save_symbol_name): Use notes_strdup.
(symbol_create, local_symbol_make, local_symbol_convert),
(symbol_clone, decode_local_label_name): Use notes_alloc.
arm gas is only supposed to warn once per symbol for -mwarn-syms, but
doesn't because the str_hash_find added with commit 629310abec
always returns NULL. That's so because the str_hash_insert inserts a
NULL value for the key,value pair. Let str_hash_insert do the job
instead.
* config/tc-arm.c (arm_tc_equal_in_insn): Correct already_warned
logic.
* testsuite/gas/arm/pr18347.s: Modify to generate duplicate
warning without this patch.
Until we update the recommended versions of autoconf/automake, files
should be regenerated with automake-1.15.1 and autoconf-2.69. That's
not because we think those versions are golden, and newer versions are
bad. It's simply because maintainers want to be able to update
configury files without trouble, and if someone regenerates files with
automake-1.16.5 then --enable-maintainer-mode builds will hit errors:
checking that generated files are newer than configure... configure.ac:26: error: version mismatch. This is Automake 1.15.1,
configure.ac:26: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:26: comes from Automake 1.16.5. You should recreate
configure.ac:26: aclocal.m4 with aclocal and run automake again.
WARNING: 'automake-1.15' is probably too old.
Correcting this requires regenerating the files by hand.
This commit adds Zfhmin and Zhinxmin extensions (subsets of Zfh and
Zhinx extensions, respectively). In the process supporting Zfhmin and
Zhinxmin extension, this commit also changes how instructions are
categorized considering Zfhmin, Zhinx and Zhinxmin extensions.
Detailed changes,
* From INSN_CLASS_ZFH to INSN_CLASS_ZFHMIN:
flh, fsh, fmv.x.h and fmv.h.x.
* From INSN_CLASS_ZFH to INSN_CLASS_ZFH_OR_ZHINX:
fmv.h.
* From INSN_CLASS_ZFH_OR_ZHINX to INSN_CLASS_ZFH_OR_ZHINX:
fneg.h, fabs.h, fsgnj.h, fsgnjn.h, fsgnjx.h,
fadd.h, fsub.h, fmul.h, fdiv.h, fsqrt.h, fmin.h, fmax.h,
fmadd.h, fnmadd.h, fmsub.h, fnmsub.h,
fcvt.w.h, fcvt.wu.h, fcvt.h.w, fcvt.h.wu,
fcvt.l.h, fcvt.lu.h, fcvt.h.l, fcvt.h.lu,
feq.h, flt.h, fle.h, fgt.h, fge.h,
fclass.h.
* From INSN_CLASS_ZFH_OR_ZHINX to INSN_CLASS_ZFHMIN_OR_ZHINXMIN:
fcvt.s.h and fcvt.h.s.
* From INSN_CLASS_D_AND_ZFH_INX to INSN_CLASS_ZFHMIN_AND_D:
fcvt.d.h and fcvt.h.d.
* From INSN_CLASS_Q_AND_ZFH_INX to INSN_CLASS_ZFHMIN_AND_Q:
fcvt.q.h and fcvt.h.q.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets): Change implicit
subsets. Zfh->Zicsr is not needed and Zfh->F is replaced with
Zfh->Zfhmin and Zfhmin->F. Zhinx->Zicsr is not needed and
Zhinx->Zfinx is replaced with Zhinx->Zhinxmin and
Zhinxmin->Zfinx.
(riscv_supported_std_z_ext): Added zfhmin and zhinxmin.
(riscv_multi_subset_supports): Rewrite handling for new
instruction classes.
(riscv_multi_subset_supports_ext): Updated.
(riscv_parse_check_conflicts): Change error message to include
zfh and zfhmin extensions.
gas/ChangeLog:
* testsuite/gas/riscv/zfhmin-d-insn-class-fail.s: New complex
error handling test.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-1.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-1.l: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-2.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-2.l: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-3.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-3.l: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-4.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-4.l: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-5.d: Likewise.
* testsuite/gas/riscv/zfhmin-d-insn-class-fail-5.l: Likewise.
* testsuite/gas/riscv/zhinx.d: Renamed from fp-zhinx-insns.d
and refactored.
* testsuite/gas/riscv/zhinx.s: Likewise.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class): Removed INSN_CLASS_ZFH,
INSN_CLASS_D_AND_ZFH_INX and INSN_CLASS_Q_AND_ZFH_INX. Added
INSN_CLASS_ZFHMIN, INSN_CLASS_ZFHMIN_OR_ZHINXMIN,
INSN_CLASS_ZFHMIN_AND_D and INSN_CLASS_ZFHMIN_AND_Q.
opcodes/ChangeLog:
* riscv-opc.c (riscv_opcodes): Change instruction classes for
Zfh and Zfhmin instructions. Fix `fcvt.h.lu' instruction
(two operand variant) mask.
This commit fixes floating point operand register names from ABI ones
to dynamically set ones.
gas/ChangeLog:
* testsuite/gas/riscv/zfinx-dis-numeric.s: Test new behavior of
Zfinx extension and -M numeric disassembler option.
* testsuite/gas/riscv/zfinx-dis-numeric.d: Likewise.
opcodes/ChangeLog:
* riscv-dis.c (riscv_disassemble_insn): Use dynamically set GPR
names to disassemble Zfinx instructions.
This commit fixes how instructions are masked on Zhinx+Z{d,q}inx.
fcvt.h.d and fcvt.d.h require ((D&&Zfh)||(Zdinx&&Zhinx)) and
fcvt.h.q and fcvt.q.h require ((Q&&Zfh)||(Zqinx&&Zhinx)).
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Fix feature gate
on INSN_CLASS_{D,Q}_AND_ZFH_INX.
(riscv_multi_subset_supports_ext): Fix feature gate diagnostics
on INSN_CLASS_{D,Q}_AND_ZFH_INX.
gas/ChangeLog:
* testsuite/gas/riscv/fp-zhinx-insns.d: Add Zqinx to -march
for proper testing.
This once again allows to reduce redundancy in (and size of) the opcode
table.
Don't go as far as also making D work on the two 5-operand XOP insns:
This would significantly complicate the code, as there the first
(immediate) operand would need special treatment in several places.
Note that the .s suffix isn't being enabled to have any effect, for
being deprecated. Whereas neither {load} nor {store} pseudo prefixes
make sense here, as the respective operands are inputs (loads) only
anyway, regardless of order. Hence there is (as before) no way for the
programmer to request the alternative encoding to be used for register-
only insns.
Note further that it is always the first original template which is
retained (and altered), to make sure the same encoding as before is
used for register-only insns. This has the slightly odd (but pre-
existing) effect of XOP register-only insns having XOP.W clear, but FMA4
ones having VEX.W set.
The middle operand would have gone entirely unchecked, allowing e.g.
vmovss %xmm0, %esp, %xmm2
to assemble successfully, or e.g.
vmovss %xmm0, $4, %xmm2
causing an internal error. Alongside dealing with this also drop a
related comment, which hasn't been applicable anymore since the
introduction of 3-operand patterns with D set (and which perhaps never
had been logical to be there, as reverse-matched insns don't make it
there in the first place).
When using just slightly non-trivial combinations of .arch, it can be
quite useful to be able to go back to prior state without needing to
re-invoke perhaps many earlier directives and without needing to invoke
perhaps many "negative" ones. Like some other architectures allow
saving (pushing) and restoring (popping) present/prior state.
For now require the same .code<N> to be in effect for ".arch pop" that
was in effect for the corresponding ".arch push".
Also change the global "no_cond_jump_promotion" to be bool, to match the
new struct field.
I never really understood upon what basis ".arch .no*" options were made
available. Let's not have any "criteria" at all, and simply allow
disabling of all of them. Then we also have all data for a sub-arch in
a single place, as we now only need a single table.
So far there was no way to reset the architecture to that assembly would
start with in the absence of any overrides (command line or directives).
Note that for Intel MCU "default" is merely an alias of "iamcu".
While there also zap a stray @item from the doc section, as noticed
when inspecting the generated output (which still has some quirks, but
those aren't easy to address without re-flowing almost the entire
section).
While it may not be necessary in i386_target_format() (but then setting
the variable to NULL also wouldn't be necessary), at least in the other
cases strings may already have accumulated.
This is in preparation of dropping the leading . from the strings.
While there also move PROCESSOR_GENERIC{32,64} from the middle of AMD
entries to near the top.
Putting individual elements behind macros, besides (imo) improving
readability, will make subsequent (and likely also future) changes less
intrusive.
Utilize this right away to pack the table a little more tightly, by
converting "skip" to bool and putting it earlier in a group of bitfields
together with "len".
Lots of memory used in gas should go on this obstack. The patch also
frees all the gas obstacks on exit, which isn't a completely trivial
task.
* subsegs.c (alloc_seginfo): New function.
(subseg_change, subseg_get): Use it.
(subsegs_end): New function.
* as.h (subsegs_end): Declare.
* output-file.c: Include subsegs.h
(stash_frchain_obs): New function.
(output_file_close): Save obstacks attached to output bfd before
closing. Call subsegs_end with the array of obstacks.
