mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
e21126b7b3
273 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Yao Qi
|
e8d58cbaac |
Remove dead code in regcache::dump
footnote_register_size in regcache::dump is a constant zero, so the
condition check against footnote_register_size is dead code. The code
writing to footnote_register_size was removed by
|
||
|
Yao Qi
|
a63f2d2fee |
cooked_read test for readonly regcache
This patch adds a test to check cooked_read for readonly regcache. For raw registers, cooked_read get either REG_VALID or REG_UNKNOWN, depends on the raw register is in save_reggroup or not. For pseudo register, cooked_read get different result in different ports. gdb: 2017-11-24 Yao Qi <yao.qi@linaro.org> * regcache.c (cooked_read_test): Add more test for readonly regcache. |
||
|
Yao Qi
|
1b30aaa566 |
regcache::cooked_read unit test
This patch adds a unit test to regcache::cooked_read. This unit test is a
little different from normal unit test, it is more about conformance test
or interaction test. This test pass both raw register number and pseudo
register number to regcache::cooked_read, in order to inspect 1) return
value of cooked_read, 2) how are target_ops to_xfer_partial,
to_{fetch,store}_registers called (because regcache is updated by means of
these three target_ops methods). With this test here, we have a clear
picture about how each port of GDB get cooked registers.
This patch also shares some code on mock target.
gdb:
2017-11-24 Yao Qi <yao.qi@linaro.org>
* gdbarch-selftests.c (test_target_has_registers): Move it to
target.c.
(test_target_has_stack): Likewise.
(test_target_has_memory): Likewise.
(test_target_prepare_to_store): Likewise.
(test_target_store_registers): Likewise.
(test_target_ops): Likewise.
* regcache.c: Include selftest-arch.h and gdbthread.h.
(target_ops_no_register): New class.
(test_target_fetch_registers): New.
(test_target_store_registers): New.
(test_target_xfer_partial): New.
(readwrite_regcache): New.
(cooked_read_test): New.
(_initialize_regcache): Register the test.
* target.c: (test_target_has_registers): Moved from
gdbarch-selftests.c.
(test_target_has_stack): Likewise.
(test_target_has_memory): Likewise.
(test_target_prepare_to_store): Likewise.
(test_target_store_registers): Likewise.
* target.h (test_target_ops): New class.
|
||
Tom Tromey
|
0b39b52e6e |
Constify add_com
This changes add_com to take a cmd_const_cfunc_ftype, and then fixes up all the command implementations. In most cases this is trivial. In a couple of places I had to again introduce a temporary non-const overload. These overloads will be removed when add_info is constified. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * solib.h (no_shared_libraries): Constify. * frame.h (return_command): Constify. * cli/cli-cmds.h (quit_command): Constify. * top.h (quit_command, execute_command): Constify. * target.h (flash_erase_command): Constify. * inferior.h (set_inferior_args, attach_command): Constify. * tracepoint.h (start_tracing, stop_tracing): Constify. * breakpoint.h (break_command, tbreak_command) (hbreak_command_wrapper, thbreak_command_wrapper) (rbreak_command_wrapper, watch_command_wrapper) (awatch_command_wrapper, rwatch_command_wrapper) (get_tracepoint_by_number): Constify. * symtab.c (info_variables_command, rbreak_command) (symtab_symbol_info): Constify. (info_variables_command): Add non-const overload. * top.c (dont_repeat_command): Constify. * breakpoint.c (ignore_command, commands_command) (condition_command, tbreak_command, hbreak_command) (thbreak_command, clear_command, break_command) (info_breakpoints_command, watch_command, rwatch_command) (awatch_command, trace_command, ftrace_command, strace_command) (trace_pass_command, break_range_command, dprintf_command) (agent_printf_command, get_tracepoint_by_number) (watch_maybe_just_location, trace_pass_command): Constify. (info_breakpoints_command): Add non-const overload. * tracefile.c (tsave_command): Constify. * infcmd.c (attach_command, disconnect_command, signal_command) (queue_signal_command, stepi_command, nexti_command) (finish_command, next_command, step_command, until_command) (advance_command, jump_command, continue_command, run_command) (start_command, starti_command, interrupt_command) (run_command_1, set_inferior_args, step_1): Constify. * inferior.c (add_inferior_command, remove_inferior_command) (clone_inferior_command): Constify. * linux-fork.c (checkpoint_command, restart_command): Constify. * windows-nat.c (signal_event_command): Constify. * guile/guile.c (guile_repl_command, guile_command): Constify. * printcmd.c (x_command, display_command, printf_command) (output_command, set_command, call_command, print_command) (eval_command): Constify. (non_const_set_command): Remove. (_initialize_printcmd): Update. * source.c (forward_search_command, reverse_search_command): Constify. * jit.c (jit_reader_load_command, jit_reader_unload_command): Constify. * infrun.c (handle_command): Constify. * memattr.c (mem_command): Constify. * stack.c (return_command, up_command, up_silently_command) (down_command, down_silently_command, frame_command) (backtrace_command, func_command, backtrace_command_1): Constify. (backtrace_command): Add non-const overload. * remote-sim.c (simulator_command): Constify. * exec.c (set_section_command): Constify. * tracepoint.c (tdump_command, trace_variable_command) (tstatus_command, tstop_command, tstart_command) (end_actions_pseudocommand, while_stepping_pseudocommand) (collect_pseudocommand, teval_pseudocommand, actions_command) (start_tracing, stop_tracing): Constify. * value.c (init_if_undefined_command): Constify. * tui/tui-stack.c (tui_update_command): Constify. * tui/tui-win.c (tui_refresh_all_command) (tui_set_tab_width_command, tui_set_win_height_command) (tui_set_focus_command, tui_scroll_forward_command) (tui_scroll_backward_command, tui_scroll_left_command) (tui_scroll_right_command, parse_scrolling_args, tui_set_focus) (tui_set_win_height): Constify. * tui/tui-layout.c (tui_layout_command): Constify. * procfs.c (proc_trace_syscalls, proc_trace_sysentry_cmd) (proc_trace_sysexit_cmd, proc_untrace_sysentry_cmd) (proc_untrace_sysexit_cmd): Constify. * remote.c (threadlist_test_cmd, threadinfo_test_cmd) (threadset_test_cmd, threadlist_update_test_cmd) (threadalive_test): Constify. * objc-lang.c (print_object_command): Constify. * command.h (add_com): Constify. * cli/cli-dump.c (restore_command): Constify. * cli/cli-cmds.c (pwd_command, echo_command, quit_command) (help_command, complete_command, shell_command, edit_command) (list_command, disassemble_command, make_command) (apropos_command, alias_command): Constify. * cli/cli-script.c (document_command, define_command) (while_command, if_command, validate_comname): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * target.c (do_monitor_command, flash_erase_command): Constify. * regcache.c (reg_flush_command): Constify. * reverse.c (reverse_step, reverse_next, reverse_stepi) (reverse_nexti, reverse_continue, reverse_finish) (save_bookmark_command, goto_bookmark_command) (exec_reverse_once): Constify. * python/python.c (python_interactive_command, python_command): Constify. * typeprint.c (ptype_command, whatis_command, whatis_exp): Constify. * solib.c (sharedlibrary_command, no_shared_libraries): Constify. * gcore.c (gcore_command): Constify. |
||
|
Yao Qi
|
f26ae15b47 |
Construct readonly regcache without address space
The address space is useless to readonly regcache, so this patch removes
the parameter to construct readonly regcache.
address_space was added in regcache by
|
||
|
Yao Qi
|
8b86c95921 |
const-fy regcache::m_aspace
regcache::m_aspace is a const, never changed during the lifetime of regcache object. The address_space object is a const object too. gdb: 2017-11-02 Yao Qi <yao.qi@linaro.org> * breakpoint.c (insert_single_step_breakpoints): Update. * frame.c (struct frame_info) <aspace>: Add const. (frame_save_as_regcache): Add const. (get_frame_address_space): Return const address_space *. * frame.h (get_frame_address_space): Update declaration. * infrun.c (struct step_over_info) <aspace>: Add const. (set_step_over_info): Make aspace const. (displaced_step_prepare_throw): Change variable const. (resume): Likewise. (proceed): Likewise. (adjust_pc_after_break): Likewise. (save_waitstatus): Likewise. (handle_signal_stop): Likewise. (keep_going_pass_signal): Likewise. * jit.c (jit_frame_sniffer): Add const. * mips-tdep.c (mips_single_step_through_delay): Likewise. * ppc-linux-tdep.c (ppu2spu_sniffer): Likewise. * record-full.c (record_full_wait_1): Likewise. * regcache.c (regcache::regcache): Change parameter to const. * regcache.h (regcache::regcache): Likewise. (regcache::aspace): Return const address_space *. (regcache) <m_aspace>: Add const. |
||
|
Yao Qi
|
a01bda5221 |
s/get_regcache_aspace (regcache)/regcache->aspace ()/g
and remove get_regcache_aspace. gdb: 2017-11-02 Yao Qi <yao.qi@linaro.org> * darwin-nat.c (cancel_breakpoint): Use regcache->aspace (). * frame.c (create_sentinel_frame): Likewise. * infrun.c (displaced_step_prepare_throw): Likewise. (resume): Likewise. (thread_still_needs_step_over_bp): Likewise. (proceed): Likewise. (do_target_wait): Likewise. (adjust_pc_after_break): Likewise. (handle_syscall_event): Likewise. (save_waitstatus): Likewise. (handle_inferior_event_1): Likewise. (handle_signal_stop): Likewise. (keep_going_pass_signal): Likewise. * linux-nat.c (status_callback): Likewise. (save_stop_reason): Likewise. (resume_stopped_resumed_lwps): Likewise. * record-full.c (record_full_exec_insn): Likewise. (record_full_wait_1): Likewise. * regcache.c (get_regcache_aspace): Remove. * regcache.h (get_regcache_aspace): Remove. |
||
|
Yao Qi
|
d999647bc4 |
Remove regcache_descr::nr_raw_registers
struct regcache_descr has fields nr_raw_registers and gdbarch, and nr_raw_registers can be got via gdbarch_num_regs (gdbarch), so it looks nr_raw_registers is redundant. This patch removes it and adds a protected method num_raw_registers. gdb: 2017-11-02 Yao Qi <yao.qi@linaro.org> * regcache.c (struct regcache_descr) <nr_raw_registers>: Remove. (init_regcache_descr): Use gdbarch_num_regs. (regcache::regcache): Likewise. (regcache::get_register_status): Likewise. (regcache::assert_raw_regnum): Likewise. (regcache::cooked_read): Likewise. (regcache::cooked_read_value): Likewise. (regcache::cooked_write): Likewise. (regcache::dump): Likewise. (regcache::num_raw_registers): New method. * regcache.h (class regcache) <num_raw_registers>: New. |
||
|
Yao Qi
|
4e888c281c |
New method regcache::assert_regnum
class regcache has some methods checking the range of register number, this patch is to move it in a new method assert_regnum. gdb: 2017-11-02 Yao Qi <yao.qi@linaro.org> * regcache.c (regcache::assert_regnum): New method. (regcache::invalidate): Call assert_regnum. (regcache::raw_update): Likewise. (regcache::raw_write): Likewise. (regcache::raw_read_part): Likewise. (regcache::raw_write_part): Likewise. (regcache::raw_supply): Likewise. (regcache::raw_supply_integer): Likewise. (regcache::raw_supply_zeroed): Likewise. (regcache::raw_collect): Likewise. (regcache::raw_collect_integer): Likewise. * regcache.h (regcache::assert_regnum): Declare. |
||
|
Yao Qi
|
2e1b49b32a |
Remove code wrapped by "#if 0"
These code wrapped by "#if 0" was added by
|
||
|
Yao Qi
|
6c5218dfdb |
Remove regcache_descr fields sizeof_raw_register_status and sizeof_cooked_register_status
struct regcache_descr has two fields sizeof_raw_register_status and sizeof_cooked_register_status, but they equal to nr_cooked_registers and nr_raw_registers respectively, so this patch removes them. gdb: 2017-11-02 Yao Qi <yao.qi@linaro.org> * regcache.c (struct regcache_descr) <sizeof_raw_register_status>: Remove. <sizeof_cooked_register_status>: Remove. (init_regcache_descr): Update. (regcache::regcache): Use nr_cooked_registers and nr_raw_registers. (regcache::save): Likewise. (regcache::dump): Likewise. |
||
|
Yao Qi
|
ac7936dfd0 |
s/get_regcache_arch (regcache)/regcache->arch ()/g
This patches removes get_regcache_arch, and use regache->arch () instead. The motivation of this change is that I am going to move some basic stuff into a base class of regcache. I don't need to update "client" code regcache->arch (). On the other hand, this patch shortens the code a little bit. gdb: 2017-10-25 Yao Qi <yao.qi@linaro.org> * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Use regcache->arch () instead get_regcache_arch. * aarch64-fbsd-nat.c (aarch64_fbsd_fetch_inferior_registers): Likewise. (aarch64_fbsd_store_inferior_registers): Likewise. * aarch64-linux-nat.c (fetch_gregs_from_thread): Likewise. (store_gregs_to_thread): Likewise. (fetch_fpregs_from_thread): Likewise. (store_fpregs_to_thread): Likewise. * aarch64-tdep.c (aarch64_extract_return_value): Likewise. (aarch64_store_return_value): Likewise. (aarch64_software_single_step): Likewise. * aix-thread.c (aix_thread_wait): Likewise. (supply_reg32): Likewise. (supply_sprs64): Likewise. (supply_sprs32): Likewise. (fill_gprs64): Likewise. (fill_gprs32): Likewise. (fill_sprs64): Likewise. (fill_sprs32): Likewise. (store_regs_user_thread): Likewise. (store_regs_kernel_thread): Likewise. * alpha-bsd-nat.c (alphabsd_fetch_inferior_registers): Likewise. (alphabsd_store_inferior_registers): Likewise. * alpha-tdep.c (alpha_extract_return_value): Likewise. (alpha_store_return_value): Likewise. (alpha_deal_with_atomic_sequence): Likewise. (alpha_next_pc): Likewise. (alpha_software_single_step): Likewise. * amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise. (amd64bsd_store_inferior_registers): Likewise. * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Likewise. (amd64_linux_store_inferior_registers): Likewise. * amd64-nat.c (amd64_supply_native_gregset): Likewise. (amd64_collect_native_gregset): Likewise. * amd64-obsd-tdep.c (amd64obsd_supply_uthread): Likewise. (amd64obsd_collect_uthread): Likewise. * amd64-tdep.c (amd64_supply_fpregset): Likewise. (amd64_collect_fpregset): Likewise. (amd64_supply_fxsave): Likewise. (amd64_supply_xsave): Likewise. (amd64_collect_fxsave): Likewise. (amd64_collect_xsave): Likewise. * arc-tdep.c (arc_write_pc): Likewise. * arch-utils.c (default_skip_permanent_breakpoint): Likewise. * arm-fbsd-nat.c (arm_fbsd_fetch_inferior_registers): Likewise. (arm_fbsd_store_inferior_registers): Likewise. * arm-linux-nat.c (fetch_vfp_regs): Likewise. (store_vfp_regs): Likewise. (arm_linux_fetch_inferior_registers): Likewise. (arm_linux_store_inferior_registers): Likewise. * arm-linux-tdep.c (arm_linux_supply_gregset): Likewise. (arm_linux_sigreturn_next_pc): Likewise. (arm_linux_get_next_pcs_syscall_next_pc): Likewise. * arm-nbsd-nat.c (arm_supply_gregset): Likewise. (fetch_register): Likewise. (store_register): Likewise. * arm-tdep.c (arm_is_thumb): Likewise. (displaced_in_arm_mode): Likewise. (bx_write_pc): Likewise. (arm_get_next_pcs_addr_bits_remove): Likewise. (arm_software_single_step): Likewise. (arm_extract_return_value): Likewise. (arm_store_return_value): Likewise. (arm_write_pc): Likewise. * bfin-tdep.c (bfin_extract_return_value): Likewise. * bsd-uthread.c (bsd_uthread_fetch_registers): Likewise. (bsd_uthread_store_registers): Likewise. * core-regset.c (fetch_core_registers): Likewise. * corelow.c (get_core_registers): Likewise. * cris-tdep.c (cris_store_return_value): Likewise. (cris_extract_return_value): Likewise. (find_step_target): Likewise. (find_step_target): Likewise. (cris_software_single_step): Likewise. * ctf.c (ctf_fetch_registers): Likewise. * darwin-nat.c (cancel_breakpoint): Likewise. * fbsd-tdep.c (fbsd_collect_thread_registers): Likewise. * frv-tdep.c (frv_extract_return_value): Likewise. * ft32-tdep.c (ft32_store_return_value): Likewise. (ft32_extract_return_value): Likewise. * go32-nat.c (fetch_register): Likewise. (go32_fetch_registers): Likewise. (go32_store_registers): Likewise. (store_register): Likewise. * h8300-tdep.c (h8300_extract_return_value): Likewise. (h8300_store_return_value): Likewise. * hppa-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (hppa_linux_fetch_inferior_registers): Likewise. (hppa_linux_store_inferior_registers): Likewise. * i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Likewise. (i386_darwin_store_inferior_registers): Likewise. * i386-gnu-nat.c (gnu_fetch_registers): Likewise. (gnu_store_registers): Likewise. * i386-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (supply_gregset): Likewise. (fill_gregset): Likewise. (i386_linux_fetch_inferior_registers): Likewise. (i386_linux_store_inferior_registers): Likewise. (i386_linux_resume): Likewise. * i386-linux-tdep.c (i386_linux_get_syscall_number_from_regcache): Likewise. * i386-nto-tdep.c (i386nto_supply_gregset): Likewise. * i386-obsd-nat.c (i386obsd_supply_pcb): Likewise. * i386-obsd-tdep.c (i386obsd_supply_uthread): Likewise. (i386obsd_collect_uthread): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_supply_fpregset): Likewise. (i386_collect_fpregset): Likewise. (i386_mpx_bd_base): Likewise. * i386-v4-nat.c (supply_fpregset): Likewise. (fill_fpregset): Likewise. * i387-tdep.c (i387_supply_fsave): Likewise. (i387_collect_fsave): Likewise. (i387_supply_fxsave): Likewise. (i387_collect_fxsave): Likewise. (i387_supply_xsave): Likewise. (i387_collect_xsave): Likewise. * ia64-linux-nat.c (ia64_linux_fetch_registers): Likewise. (ia64_linux_store_registers): Likewise. * ia64-tdep.c (ia64_access_rse_reg): Likewise. (ia64_extract_return_value): Likewise. (ia64_store_return_value): Likewise. (find_func_descr): Likewise. * inf-child.c (inf_child_fetch_inferior_registers): Likewise. * inf-ptrace.c (inf_ptrace_fetch_registers): Likewise. (inf_ptrace_store_registers): Likewise. * infrun.c (use_displaced_stepping): Likewise. (displaced_step_prepare_throw): Likewise. (resume): Likewise. (proceed): Likewise. (do_target_wait): Likewise. (adjust_pc_after_break): Likewise. (handle_inferior_event_1): Likewise. (handle_signal_stop): Likewise. (save_infcall_suspend_state): Likewise. (restore_infcall_suspend_state): Likewise. * iq2000-tdep.c (iq2000_extract_return_value): Likewise. * jit.c (jit_frame_prev_register): Likewise. * linux-nat.c (save_stop_reason): Likewise. (linux_nat_wait_1): Likewise. (resume_stopped_resumed_lwps): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (record_linux_system_call): Likewise. * linux-tdep.c (linux_collect_thread_registers): Likewise. * lm32-tdep.c (lm32_extract_return_value): Likewise. (lm32_store_return_value): Likewise. * m32c-tdep.c (m32c_read_flg): Likewise. (m32c_pseudo_register_read): Likewise. (m32c_pseudo_register_write): Likewise. * m32r-linux-tdep.c (m32r_linux_supply_gregset): Likewise. (m32r_linux_collect_gregset): Likewise. * m32r-tdep.c (m32r_store_return_value): Likewise. (m32r_extract_return_value): Likewise. * m68k-bsd-nat.c (m68kbsd_supply_fpregset): Likewise. (m68kbsd_collect_fpregset): Likewise. * m68k-bsd-tdep.c (m68kbsd_supply_fpregset): Likewise. * m68k-linux-nat.c (fetch_register): Likewise. (old_fetch_inferior_registers): Likewise. (old_store_inferior_registers): Likewise. (store_regs): Likewise. * m68k-tdep.c (m68k_svr4_extract_return_value): Likewise. (m68k_svr4_store_return_value): Likewise. * m88k-tdep.c (m88k_store_arguments): Likewise. * mi/mi-main.c (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_write_register_values): Likewise. * mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers): Likewise. (mips_fbsd_store_inferior_registers): Likewise. * mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Likewise. (mips_fbsd_supply_gregs): Likewise. (mips_fbsd_collect_fpregs): Likewise. (mips_fbsd_collect_gregs): Likewise. (mips_fbsd_supply_fpregset): Likewise. (mips_fbsd_collect_fpregset): Likewise. (mips_fbsd_supply_gregset): Likewise. (mips_fbsd_collect_gregset): Likewise. * mips-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (supply_fpregset): Likewise. (fill_fpregset): Likewise. * mips-linux-tdep.c (mips_supply_gregset): Likewise. (mips_fill_gregset): Likewise. (mips_supply_fpregset): Likewise. (mips_fill_fpregset): Likewise. (mips64_supply_gregset): Likewise. (micromips_linux_sigframe_validate): Likewise. * mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_store_inferior_registers): Likewise. * mips-nbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise. (mipsnbsd_supply_gregset): Likewise. (mipsnbsd_iterate_over_regset_sections): Likewise. (mipsnbsd_supply_reg): Likewise. (mipsnbsd_supply_fpreg): Likewise. * mips-tdep.c (mips_in_frame_stub): Likewise. (mips_dummy_id): Likewise. (is_octeon_bbit_op): Likewise. (micromips_bc1_pc): Likewise. (extended_mips16_next_pc): Likewise. (mips16_next_pc): Likewise. (deal_with_atomic_sequence): Likewise. * moxie-tdep.c (moxie_process_readu): Likewise. * nios2-tdep.c (nios2_get_next_pc): Likewise. * nto-procfs.c (procfs_store_registers): Likewise. * ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers): Likewise. (ppcfbsd_store_inferior_registers): Likewise. * ppc-linux-nat.c (fetch_vsx_register): Likewise. (fetch_altivec_register): Likewise. (get_spe_registers): Likewise. (fetch_spe_register): Likewise. (fetch_altivec_registers): Likewise. (fetch_all_gp_regs): Likewise. (fetch_all_fp_regs): Likewise. (store_vsx_register): Likewise. (store_altivec_register): Likewise. (set_spe_registers): Likewise. (store_spe_register): Likewise. (store_altivec_registers): Likewise. (store_all_gp_regs): Likewise. (store_all_fp_regs): Likewise. * ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise. (ppc_linux_collect_gregset): Likewise. (ppc_canonicalize_syscall): Likewise. (ppc_linux_record_signal): Likewise. (ppu2spu_prev_register): Likewise. * ppc-nbsd-nat.c (ppcnbsd_supply_pcb): Likewise. * ppc-obsd-nat.c (ppcobsd_fetch_registers): Likewise. (ppcobsd_store_registers): Likewise. * ppc-ravenscar-thread.c (ppc_ravenscar_generic_fetch_registers): Likewise. (ppc_ravenscar_generic_store_registers): Likewise. * procfs.c (procfs_fetch_registers): Likewise. (procfs_store_registers): Likewise. * ravenscar-thread.c (ravenscar_fetch_registers): Likewise. (ravenscar_store_registers): Likewise. (ravenscar_prepare_to_store): Likewise. * record-btrace.c (record_btrace_fetch_registers): Likewise. * record-full.c (record_full_wait_1): Likewise. (record_full_registers_change): Likewise. (record_full_store_registers): Likewise. (record_full_core_fetch_registers): Likewise. (record_full_save): Likewise. (record_full_goto_insn): Likewise. * regcache.c (regcache_register_size): Likewise. (get_regcache_arch): Remove. (regcache_read_pc): Likewise. * regcache.h (get_regcache_arch): Remove. * remote-sim.c (gdbsim_fetch_register): Likewise. (gdbsim_store_register): Likewise. * remote.c (fetch_register_using_p): Likewise. (send_g_packet): Likewise. (remote_prepare_to_store): Likewise. (store_registers_using_G): Likewise. * reverse.c (save_bookmark_command): Likewise. (goto_bookmark_command): Likewise. * rs6000-aix-tdep.c (branch_dest): Likewise. * rs6000-nat.c (rs6000_ptrace64): Likewise. (fetch_register): Likewise. * rs6000-tdep.c (ppc_supply_reg): Likewise. (ppc_collect_reg): Likewise. (ppc_collect_gregset): Likewise. (ppc_collect_fpregset): Likewise. (ppc_collect_vsxregset): Likewise. (ppc_collect_vrregset): Likewise. (ppc_displaced_step_hw_singlestep): Likewise. (rs6000_pseudo_register_read): Likewise. (rs6000_pseudo_register_write): Likewise. * s390-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (s390_linux_fetch_inferior_registers): Likewise. * s390-linux-tdep.c (s390_write_pc): Likewise. (s390_software_single_step): Likewise. (s390_all_but_pc_registers_record): Likewise. (s390_linux_syscall_record): Likewise. * sentinel-frame.c (sentinel_frame_prev_arch): Likewise. * sh-nbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise. (shnbsd_store_inferior_registers): Likewise. * sh-tdep.c (sh_extract_return_value_nofpu): Likewise. (sh_extract_return_value_fpu): Likewise. (sh_store_return_value_nofpu): Likewise. (sh_corefile_supply_regset): Likewise. (sh_corefile_collect_regset): Likewise. * sh64-tdep.c (sh64_extract_return_value): Likewise. (sh64_store_return_value): Likewise. * sparc-linux-tdep.c (sparc32_linux_collect_core_fpregset): Likewise. * sparc-nat.c (sparc_fetch_inferior_registers): Likewise. (sparc_store_inferior_registers): Likewise. * sparc-ravenscar-thread.c (register_in_thread_descriptor_p): Likewise. (sparc_ravenscar_prepare_to_store): Likewise. * sparc-tdep.c (sparc32_store_arguments): Likewise. (sparc_analyze_control_transfer): Likewise. (sparc_step_trap): Likewise. (sparc_software_single_step): Likewise. (sparc32_gdbarch_init): Likewise. (sparc_supply_rwindow): Likewise. (sparc_collect_rwindow): Likewise. * sparc64-linux-tdep.c (sparc64_linux_collect_core_fpregset): Likewise. * sparc64-nbsd-nat.c (sparc64nbsd_supply_gregset): Likewise. (sparc64nbsd_collect_gregset): Likewise. (sparc64nbsd_supply_fpregset): Likewise. (sparc64nbsd_collect_fpregset): Likewise. * sparc64-tdep.c (sparc64_store_arguments): Likewise. (sparc64_supply_gregset): Likewise. (sparc64_collect_gregset): Likewise. (sparc64_supply_fpregset): Likewise. (sparc64_collect_fpregset): Likewise. * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise. * spu-tdep.c (spu_unwind_sp): Likewise. (spu2ppu_prev_register): Likewise. (spu_memory_remove_breakpoint): Likewise. * stack.c (return_command): Likewise. * tic6x-tdep.c (tic6x_extract_signed_field): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (trace_save_ctf): Likewise. * windows-nat.c (do_windows_fetch_inferior_registers): Likewise. (do_windows_store_inferior_registers): Likewise. (windows_resume): Likewise. * xtensa-linux-nat.c (fill_gregset): Likewise. (supply_gregset_reg): Likewise. * xtensa-tdep.c (xtensa_register_write_masked): Likewise. (xtensa_register_read_masked): Likewise. (xtensa_supply_gregset): Likewise. (xtensa_extract_return_value): Likewise. (xtensa_store_return_value): Likewise. |
||
|
Tom Tromey
|
57e12da97f |
Remove obsolete assertion from regcache.c
When building I got: ../../binutils-gdb/gdb/regcache.c:935:24: error: the address of ‘ssize_t read(int, void*, size_t)’ will never be NULL [-Werror=address] This happens because "read" used to be a parameter to this function, which was then removed; but the assertion wasn't updated. I don't think the assertion is relevant any more, to this removes it. I'm checking it in as obvious. 2017-10-17 Tom Tromey <tom@tromey.com> * regcache.c (regcache::xfer_part): Remove assertion. |
||
|
Yao Qi
|
d3037ba6a3 |
Simplify regcache::xfer_part
Since xfer_part is already a class method, and only
{raw,cooked}_{read,write} are passed to it. We can remove these two
arguments, but add a bool argument is_raw, indicating raw registers or
cooked registers are accessed.
gdb:
2017-10-17 Yao Qi <yao.qi@linaro.org>
* regcache.c (regcache::xfer_part): Remove parameters read and
write, add parameter is_raw. All callers are updated.
|
||
Pedro Alves
|
ed4227b7c6 |
Reimplement support for "maint print registers" with no running inferior yet
A following patch will change the default target_thread_architecture
method, like this:
struct gdbarch *
default_thread_architecture (struct target_ops *ops, ptid_t ptid)
{
- return target_gdbarch ();
+ inferior *inf = find_inferior_ptid (ptid);
+ gdb_assert (inf != NULL);
+ return inf->gdbarch;
}
This is because target_gdbarch is really just
current_inferior()->gdbarch, and it's wrong to return that
architecture when the inferior of the passed in PTID is NOT the
current inferior -- the inferior for PTID may be running a different
architecture. E.g., a mix of 64-bit and 32-bit inferiors in the same
debug session.
Doing that change above however exposes a problem in "maint print
registers", caught be the testsuite:
-PASS: gdb.base/maint.exp: maint print registers
+FAIL: gdb.base/maint.exp: maint print registers (GDB internal error)
...
gdb/inferior.c:309: internal-error: inferior* find_inferior_pid(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
The call stack looks like this:
#0 0x000000000068b707 in internal_error(char const*, int, char const*, ...) (file=0xa9b958 "gdb/inferior.c", line=309, fmt=0xa9b8e0 "%s: Assertion `%s' failed.") at gdb/common/errors.c:54
#1 0x00000000006e1c40 in find_inferior_pid(int) (pid=0) at gdb/inferior.c:309
#2 0x00000000006e1c8d in find_inferior_ptid(ptid_t) (ptid=...) at gdb/inferior.c:323
#3 0x00000000007c18dc in default_thread_architecture(target_ops*, ptid_t) (ops=0xf86d60 <dummy_target>, ptid=...)
at gdb/target.c:3134
#4 0x00000000007b5414 in delegate_thread_architecture(target_ops*, ptid_t) (self=0xf86d60 <dummy_target>, arg1=...)
at gdb/target-delegates.c:2527
#5 0x00000000007647b3 in get_thread_regcache(ptid_t) (ptid=...) at gdb/regcache.c:466
#6 0x00000000007647ff in get_current_regcache() () at gdb/regcache.c:475
#7 0x0000000000767495 in regcache_print(char const*, regcache_dump_what) (args=0x0, what_to_dump=regcache_dump_none)
at gdb/regcache.c:1599
#8 0x0000000000767550 in maintenance_print_registers(char const*, int) (args=0x0, from_tty=1)
at gdb/regcache.c:1613
I.e., the test does "maint print registers" while the inferior is not
running yet. This is expected to work, and there's already a hack in
get_thread_arch_regcache to make it work.
Instead of pilling on hacks in the internal of regcache and
target_ops, this commit moves the null_ptid special casing to where it
belongs -- higher up in the call chain in the implementation of "maint
print registers" & co directly.
gdb/ChangeLog:
2017-10-04 Pedro Alves <palves@redhat.com>
* regcache.c (get_thread_arch_regcache): Remove null_ptid special
case.
(regcache_print): Handle !target_has_registers here instead.
|
||
|
Tom Tromey
|
4e00131263 |
Constify some commands in regcache.c
gdb/ChangeLog 2017-09-27 Tom Tromey <tom@tromey.com> * regcache.c (regcache_print, maintenance_print_registers) (maintenance_print_raw_registers) (maintenance_print_cooked_registers) (maintenance_print_register_groups) (maintenance_print_remote_registers): Constify. |
||
|
Tom Tromey
|
6c3e20f177 |
Remove the last cleanup from regcache.c
This removes the last cleanup from regcache.c by changing one function to use std::string. gdb/ChangeLog 2017-09-25 Tom Tromey <tom@tromey.com> * regcache.c (regcache::dump): Use string_printf. |
||
|
Tom Tromey
|
b292235f66 |
Remove make_cleanup_regcache_invalidate
This removes make_cleanup_regcache_invalidate in favor of a simple RAII class that handles register invalidation. gdb/ChangeLog 2017-09-25 Tom Tromey <tom@tromey.com> * regcache.c (class regcache_invalidator): New. (struct register_to_invalidate): Remove. (make_cleanup_regcache_invalidate): Remove. (regcache::raw_write): Use regcache_invalidator. |
||
|
Tom Tromey
|
9ac86b52da |
Remove make_cleanup_regcache_xfree
This removes make_cleanup_regcache_xfree in favor of using std::unique_ptr as the return type of frame_save_as_regcache. gdb/ChangeLog 2017-09-25 Tom Tromey <tom@tromey.com> * spu-tdep.c (spu2ppu_sniffer): Update. * regcache.h (make_cleanup_regcache_xfree): Don't declare. * regcache.c (do_regcache_xfree, make_cleanup_regcache_xfree): Remove. * ppc-linux-tdep.c (ppu2spu_sniffer): Update. * mi/mi-main.c (mi_cmd_data_list_changed_registers): Update. * frame.h (frame_save_as_regcache): Return std::unique_ptr. * frame.c (frame_save_as_regcache): Return std::unique_ptr. (frame_pop): Update. |
||
|
Tom Tromey
|
c0e383c638 |
Remove regcache_xfree
This removes regcache_xfree in favor of plain "delete". gdb/ChangeLog 2017-09-25 Tom Tromey <tom@tromey.com> * spu-tdep.c (spu2ppu_dealloc_cache): Use delete. * regcache.h (regcache_xfree): Don't declare. * regcache.c (regcache_xfree): Remove. (do_regcache_xfree): Use delete. * ppc-linux-tdep.c (ppu2spu_dealloc_cache): Use delete. * linux-fork.c (free_fork): Use delete. (fork_save_infrun_state): Likewise. * jit.c (jit_dealloc_cache): Use delete. * infrun.c (discard_infcall_suspend_state): Use delete. |
||
|
Tom Tromey
|
791199cc75 |
Remove regcache_xmalloc
This patch removes regcache_xmalloc in favor of plain "new". gdb/ChangeLog 2017-09-25 Tom Tromey <tom@tromey.com> * regcache.h (regcache_xmalloc): Don't declare. (regcache_raw_set_cached_value): Update comment. * regcache.c (regcache_xmalloc): Remove. * ppc-linux-tdep.c (ppu2spu_sniffer): Use new. * jit.c (jit_frame_sniffer): Use new. * frame.c (frame_save_as_regcache): Use new. |
||
Simon Marchi
|
1526853e34 |
Add selftests run filtering
With the growing number of selftests, I think it would be useful to be
able to run only a subset of the tests. This patch associates a name to
each registered selftest. It then allows doing something like:
(gdb) maintenance selftest aarch64
Running self-tests.
Running selftest aarch64-analyze-prologue.
Running selftest aarch64-process-record.
Ran 2 unit tests, 0 failed
or with gdbserver:
./gdbserver --selftest=aarch64
In both cases, only the tests that contain "aarch64" in their name are
ran. To help validate that the tests you want to run were actually ran,
it also prints a message with the test name before running each test.
Right now, all the arch-dependent tests are registered as a single test
of the selftests. To be able to filter those too, I made them
"first-class citizen" selftests. The selftest type is an interface,
with different implementations for "simple selftests" and "arch
selftests". The run_tests function simply iterates on that an invokes
operator() on each test.
I changed the tests data structure from a vector to a map, because
- it allows iterating in a stable (alphabetical) order
- it allows to easily verify if a test with a given name has been
registered, to avoid duplicates
There's also a new command "maintenance info selftests" that lists the
registered selftests.
gdb/ChangeLog:
* common/selftest.h (selftest): New struct/interface.
(register_test): Add name parameter, add new overload.
(run_tests): Add filter parameter.
(for_each_selftest_ftype): New typedef.
(for_each_selftest): New declaration.
* common/selftest.c (tests): Change type to
map<string, unique_ptr<selftest>>.
(simple_selftest): New struct.
(register_test): New function.
(register_test): Add name parameter and use it.
(run_tests): Add filter parameter and use it. Add prints.
Adjust to vector -> map change.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add names when
registering selftests.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* disasm-selftests.c (_initialize_disasm_selftests): Likewise.
* dwarf2-frame.c (_initialize_dwarf2_frame): Likewise.
* dwarf2loc.c (_initialize_dwarf2loc): Likewise.
* findvar.c (_initialize_findvar): Likewise.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Likewise.
* maint.c (maintenance_selftest): Update call to run_tests.
(maintenance_info_selftests): New function.
(_initialize_maint_cmds): Register "maintenance info selftests"
command. Update "maintenance selftest" doc.
* regcache.c (_initialize_regcache): Add names when registering
selftests.
* rust-exp.y (_initialize_rust_exp): Likewise.
* selftest-arch.c (gdbarch_selftest): New struct.
(gdbarch_tests): Remove.
(register_test_foreach_arch): Add name parameter. Call
register_test.
(tests_with_arch): Remove, move most content to
gdbarch_selftest::operator().
(_initialize_selftests_foreach_arch): Remove.
* selftest-arch.h (register_test_foreach_arch): Add name
parameter.
(run_tests_with_arch): New declaration.
* utils-selftests.c (_initialize_utils_selftests): Add names
when registering selftests.
* utils.c (_initialize_utils): Likewise.
* unittests/array-view-selftests.c
(_initialize_array_view_selftests): Likewise.
* unittests/environ-selftests.c (_initialize_environ_selftests):
Likewise.
* unittests/function-view-selftests.c
(_initialize_function_view_selftests): Likewise.
* unittests/offset-type-selftests.c
(_initialize_offset_type_selftests): Likewise.
* unittests/optional-selftests.c
(_initialize_optional_selftests): Likewise.
* unittests/scoped_restore-selftests.c
(_initialize_scoped_restore_selftests): Likewise.
* NEWS: Document "maintenance selftest" and "maint info
selftests".
gdb/gdbserver/ChangeLog:
* server.c (captured_main): Accept argument for --selftest.
Update run_tests call.
* linux-x86-tdesc-selftest.c (initialize_low_tdesc): Add names
when registering selftests.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Document filter parameter
of "maint selftest". Document "maint info selftests" command.
|
||
John Baldwin
|
481695ed5f |
Remove unnecessary function prototypes.
These prototypes were required when compiling GDB as C but are not required for C++. gdb/ChangeLog: * aarch64-linux-nat.c: Remove _initialize_aarch64_linux_nat prototype. * aarch64-linux-tdep.c: Remove _initialize_aarch64_linux_tdep prototype. * aarch64-newlib-tdep.c: Remove _initialize_aarch64_newlib_tdep prototype. * aarch64-tdep.c: Remove _initialize_aarch64_tdep prototype. * ada-exp.y: Remove _initialize_ada_exp prototype. * ada-lang.c: Remove _initialize_ada_language prototype. * ada-tasks.c: Remove _initialize_tasks prototype. * addrmap.c: Remove _initialize_addrmap prototype. * agent.c: Remove _initialize_agent prototype. * aix-thread.c: Remove _initialize_aix_thread prototype. * alpha-bsd-nat.c: Remove _initialize_alphabsd_nat prototype. * alpha-linux-nat.c: Remove _initialize_alpha_linux_nat prototype. * alpha-linux-tdep.c: Remove _initialize_alpha_linux_tdep prototype. * alpha-nbsd-tdep.c: Remove _initialize_alphanbsd_tdep prototype. * alpha-obsd-tdep.c: Remove _initialize_alphaobsd_tdep prototype. * alpha-tdep.c: Remove _initialize_alpha_tdep prototype. * amd64-darwin-tdep.c: Remove _initialize_amd64_darwin_tdep prototype. * amd64-dicos-tdep.c: Remove _initialize_amd64_dicos_tdep prototype. * amd64-fbsd-nat.c: Remove _initialize_amd64fbsd_nat prototype. * amd64-fbsd-tdep.c: Remove _initialize_amd64fbsd_tdep prototype. * amd64-linux-nat.c: Remove _initialize_amd64_linux_nat prototype. * amd64-linux-tdep.c: Remove _initialize_amd64_linux_tdep prototype. * amd64-nbsd-nat.c: Remove _initialize_amd64nbsd_nat prototype. * amd64-nbsd-tdep.c: Remove _initialize_amd64nbsd_tdep prototype. * amd64-obsd-nat.c: Remove _initialize_amd64obsd_nat prototype. * amd64-obsd-tdep.c: Remove _initialize_amd64obsd_tdep prototype. * amd64-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * amd64-tdep.c: Remove _initialize_amd64_tdep prototype. * amd64-windows-nat.c: Remove _initialize_amd64_windows_nat prototype. * amd64-windows-tdep.c: Remove _initialize_amd64_windows_tdep prototype. * annotate.c: Remove _initialize_annotate prototype. * arc-newlib-tdep.c: Remove _initialize_arc_newlib_tdep prototype. * arc-tdep.c: Remove _initialize_arc_tdep prototype. * arch-utils.c: Remove _initialize_gdbarch_utils prototype. * arm-linux-nat.c: Remove _initialize_arm_linux_nat prototype. * arm-linux-tdep.c: Remove _initialize_arm_linux_tdep prototype. * arm-nbsd-tdep.c: Remove _initialize_arm_netbsd_tdep prototype. * arm-obsd-tdep.c: Remove _initialize_armobsd_tdep prototype. * arm-symbian-tdep.c: Remove _initialize_arm_symbian_tdep prototype. * arm-tdep.c: Remove _initialize_arm_tdep prototype. * arm-wince-tdep.c: Remove _initialize_arm_wince_tdep prototype. * auto-load.c: Remove _initialize_auto_load prototype. * auxv.c: Remove _initialize_auxv prototype. * avr-tdep.c: Remove _initialize_avr_tdep prototype. * ax-gdb.c: Remove _initialize_ax_gdb prototype. * bfin-linux-tdep.c: Remove _initialize_bfin_linux_tdep prototype. * bfin-tdep.c: Remove _initialize_bfin_tdep prototype. * break-catch-sig.c: Remove _initialize_break_catch_sig prototype. * break-catch-syscall.c: Remove _initialize_break_catch_syscall prototype. * break-catch-throw.c: Remove _initialize_break_catch_throw prototype. * breakpoint.c: Remove _initialize_breakpoint prototype. * bsd-uthread.c: Remove _initialize_bsd_uthread prototype. * btrace.c: Remove _initialize_btrace prototype. * charset.c: Remove _initialize_charset prototype. * cli/cli-cmds.c: Remove _initialize_cli_cmds prototype. * cli/cli-dump.c: Remove _initialize_cli_dump prototype. * cli/cli-interp.c: Remove _initialize_cli_interp prototype. * cli/cli-logging.c: Remove _initialize_cli_logging prototype. * cli/cli-script.c: Remove _initialize_cli_script prototype. * coff-pe-read.c: Remove _initialize_coff_pe_read prototype. * coffread.c: Remove _initialize_coffread prototype. * compile/compile.c: Remove _initialize_compile prototype. * complaints.c: Remove _initialize_complaints prototype. * completer.c: Remove _initialize_completer prototype. * copying.awk: Remove _initialize_copying prototype. * copying.c: Regenerate. * core-regset.c: Remove _initialize_core_regset prototype. * corefile.c: Remove _initialize_core prototype. * corelow.c: Remove _initialize_corelow prototype. * cp-abi.c: Remove _initialize_cp_abi prototype. * cp-namespace.c: Remove _initialize_cp_namespace prototype. * cp-support.c: Remove _initialize_cp_support prototype. * cp-valprint.c: Remove _initialize_cp_valprint prototype. * cris-linux-tdep.c: Remove _initialize_cris_linux_tdep prototype. * cris-tdep.c: Remove _initialize_cris_tdep prototype. * ctf.c: Remove _initialize_ctf prototype. * d-lang.c: Remove _initialize_d_language prototype. * darwin-nat-info.c: Remove _initialize_darwin_info_commands prototype. * darwin-nat.c: Remove _initialize_darwin_inferior prototype. * dbxread.c: Remove _initialize_dbxread prototype. * dcache.c: Remove _initialize_dcache prototype. * demangle.c: Remove _initialize_demangler prototype. * disasm-selftests.c: Remove _initialize_disasm_selftests prototype. * disasm.c: Remove _initialize_disasm prototype. * dtrace-probe.c: Remove _initialize_dtrace_probe prototype. * dummy-frame.c: Remove _initialize_dummy_frame prototype. * dwarf2-frame-tailcall.c: Remove _initialize_tailcall_frame prototype. * dwarf2-frame.c: Remove _initialize_dwarf2_frame prototype. * dwarf2expr.c: Remove _initialize_dwarf2expr prototype. * dwarf2loc.c: Remove _initialize_dwarf2loc prototype. * dwarf2read.c: Remove _initialize_dwarf2_read prototype. * elfread.c: Remove _initialize_elfread prototype. * exec.c: Remove _initialize_exec prototype. * extension.c: Remove _initialize_extension prototype. * f-lang.c: Remove _initialize_f_language prototype. * f-valprint.c: Remove _initialize_f_valprint prototype. * fbsd-nat.c: Remove _initialize_fbsd_nat prototype. * fbsd-tdep.c: Remove _initialize_fbsd_tdep prototype. * filesystem.c: Remove _initialize_filesystem prototype. * findcmd.c: Remove _initialize_mem_search prototype. * fork-child.c: Remove _initialize_fork_child prototype. * frame-base.c: Remove _initialize_frame_base prototype. * frame-unwind.c: Remove _initialize_frame_unwind prototype. * frame.c: Remove _initialize_frame prototype. * frv-linux-tdep.c: Remove _initialize_frv_linux_tdep prototype. * frv-tdep.c: Remove _initialize_frv_tdep prototype. * ft32-tdep.c: Remove _initialize_ft32_tdep prototype. * gcore.c: Remove _initialize_gcore prototype. * gdb_bfd.c: Remove _initialize_gdb_bfd prototype. * gdbarch.c: Regenerate. * gdbarch.sh: Remove _initialize_gdbarch prototype. * gdbtypes.c: Remove _initialize_gdbtypes prototype. * gnu-nat.c: Remove _initialize_gnu_nat prototype. * gnu-v2-abi.c: Remove _initialize_gnu_v2_abi prototype. * gnu-v3-abi.c: Remove _initialize_gnu_v3_abi prototype. * go-lang.c: Remove _initialize_go_language prototype. * go32-nat.c: Remove _initialize_go32_nat prototype. * guile/guile.c: Remove _initialize_guile prototype. * h8300-tdep.c: Remove _initialize_h8300_tdep prototype. * hppa-linux-nat.c: Remove _initialize_hppa_linux_nat prototype. * hppa-linux-tdep.c: Remove _initialize_hppa_linux_tdep prototype. * hppa-nbsd-nat.c: Remove _initialize_hppanbsd_nat prototype. * hppa-nbsd-tdep.c: Remove _initialize_hppanbsd_tdep prototype. * hppa-obsd-nat.c: Remove _initialize_hppaobsd_nat prototype. * hppa-obsd-tdep.c: Remove _initialize_hppaobsd_tdep prototype. * hppa-tdep.c: Remove _initialize_hppa_tdep prototype. * i386-bsd-nat.c: Remove _initialize_i386bsd_nat prototype. * i386-cygwin-tdep.c: Remove _initialize_i386_cygwin_tdep prototype. * i386-darwin-tdep.c: Remove _initialize_i386_darwin_tdep prototype. * i386-dicos-tdep.c: Remove _initialize_i386_dicos_tdep prototype. * i386-fbsd-nat.c: Remove _initialize_i386fbsd_nat prototype. * i386-fbsd-tdep.c: Remove _initialize_i386fbsd_tdep prototype. * i386-gnu-nat.c: Remove _initialize_i386gnu_nat prototype. * i386-gnu-tdep.c: Remove _initialize_i386gnu_tdep prototype. * i386-linux-nat.c: Remove _initialize_i386_linux_nat prototype. * i386-linux-tdep.c: Remove _initialize_i386_linux_tdep prototype. * i386-nbsd-nat.c: Remove _initialize_i386nbsd_nat prototype. * i386-nbsd-tdep.c: Remove _initialize_i386nbsd_tdep prototype. * i386-nto-tdep.c: Remove _initialize_i386nto_tdep prototype. * i386-obsd-nat.c: Remove _initialize_i386obsd_nat prototype. * i386-obsd-tdep.c: Remove _initialize_i386obsd_tdep prototype. * i386-sol2-nat.c: Remove _initialize_amd64_sol2_nat prototype. * i386-sol2-tdep.c: Remove _initialize_amd64_sol2_tdep prototype. * i386-tdep.c: Remove _initialize_i386_tdep prototype. * i386-windows-nat.c: Remove _initialize_i386_windows_nat prototype. * ia64-libunwind-tdep.c: Remove _initialize_libunwind_frame prototype. * ia64-linux-nat.c: Remove _initialize_ia64_linux_nat prototype. * ia64-linux-tdep.c: Remove _initialize_ia64_linux_tdep prototype. * ia64-tdep.c: Remove _initialize_ia64_tdep prototype. * ia64-vms-tdep.c: Remove _initialize_ia64_vms_tdep prototype. * infcall.c: Remove _initialize_infcall prototype. * infcmd.c: Remove _initialize_infcmd prototype. * inferior.c: Remove _initialize_inferiors prototype. * inflow.c: Remove _initialize_inflow prototype. * infrun.c: Remove _initialize_infrun prototype. * interps.c: Remove _initialize_interpreter prototype. * iq2000-tdep.c: Remove _initialize_iq2000_tdep prototype. * jit.c: Remove _initialize_jit prototype. * language.c: Remove _initialize_language prototype. * linux-fork.c: Remove _initialize_linux_fork prototype. * linux-nat.c: Remove _initialize_linux_nat prototype. * linux-tdep.c: Remove _initialize_linux_tdep prototype. * linux-thread-db.c: Remove _initialize_thread_db prototype. * lm32-tdep.c: Remove _initialize_lm32_tdep prototype. * m2-lang.c: Remove _initialize_m2_language prototype. * m32c-tdep.c: Remove _initialize_m32c_tdep prototype. * m32r-linux-nat.c: Remove _initialize_m32r_linux_nat prototype. * m32r-linux-tdep.c: Remove _initialize_m32r_linux_tdep prototype. * m32r-tdep.c: Remove _initialize_m32r_tdep prototype. * m68hc11-tdep.c: Remove _initialize_m68hc11_tdep prototype. * m68k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m68k-bsd-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * m68k-linux-nat.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-linux-tdep.c: Remove _initialize_m68k_linux_tdep prototype. * m68k-tdep.c: Remove _initialize_m68k_tdep prototype. * m88k-bsd-nat.c: Remove _initialize_m68kbsd_nat prototype. * m88k-tdep.c: Remove _initialize_m68kbsd_tdep prototype. * machoread.c: Remove _initialize_machoread prototype. * macrocmd.c: Remove _initialize_macrocmd prototype. * macroscope.c: Remove _initialize_macroscope prototype. * maint.c: Remove _initialize_maint_cmds prototype. * mdebugread.c: Remove _initialize_mdebugread prototype. * memattr.c: Remove _initialize_mem prototype. * mep-tdep.c: Remove _initialize_mep_tdep prototype. * mi/mi-cmd-env.c: Remove _initialize_mi_cmd_env prototype. * mi/mi-cmds.c: Remove _initialize_mi_cmds prototype. * mi/mi-interp.c: Remove _initialize_mi_interp prototype. * mi/mi-main.c: Remove _initialize_mi_main prototype. * microblaze-linux-tdep.c: Remove _initialize_microblaze_linux_tdep prototype. * microblaze-tdep.c: Remove _initialize_microblaze_tdep prototype. * mips-fbsd-nat.c: Remove _initialize_mips_fbsd_nat prototype. * mips-fbsd-tdep.c: Remove _initialize_mips_fbsd_tdep prototype. * mips-linux-nat.c: Remove _initialize_mips_linux_nat prototype. * mips-linux-tdep.c: Remove _initialize_mips_linux_tdep prototype. * mips-nbsd-nat.c: Remove _initialize_mipsnbsd_nat prototype. * mips-nbsd-tdep.c: Remove _initialize_mipsnbsd_tdep prototype. * mips-sde-tdep.c: Remove _initialize_mips_sde_tdep prototype. * mips-tdep.c: Remove _initialize_mips_tdep prototype. * mips64-obsd-nat.c: Remove _initialize_mips64obsd_nat prototype. * mips64-obsd-tdep.c: Remove _initialize_mips64obsd_tdep prototype. * mipsread.c: Remove _initialize_mipsread prototype. * mn10300-linux-tdep.c: Remove _initialize_mn10300_linux_tdep prototype. * mn10300-tdep.c: Remove _initialize_mn10300_tdep prototype. * moxie-tdep.c: Remove _initialize_moxie_tdep prototype. * msp430-tdep.c: Remove _initialize_msp430_tdep prototype. * mt-tdep.c: Remove _initialize_mt_tdep prototype. * nds32-tdep.c: Remove _initialize_nds32_tdep prototype. * nios2-linux-tdep.c: Remove _initialize_nios2_linux_tdep prototype. * nios2-tdep.c: Remove _initialize_nios2_tdep prototype. * nto-procfs.c: Remove _initialize_procfs prototype. * nto-tdep.c: Remove _initialize_nto_tdep prototype. * objc-lang.c: Remove _initialize_objc_language prototype. * objfiles.c: Remove _initialize_objfiles prototype. * observer.c: Remove observer_test_first_notification_function, observer_test_second_notification_function, observer_test_third_notification_function, and _initialize_observer prototypes. * opencl-lang.c: Remove _initialize_opencl_language prototypes. * osabi.c: Remove _initialize_gdb_osabi prototype. * osdata.c: Remove _initialize_osdata prototype. * p-valprint.c: Remove _initialize_pascal_valprint prototype. * parse.c: Remove _initialize_parse prototype. * ppc-fbsd-nat.c: Remove _initialize_ppcfbsd_nat prototype. * ppc-fbsd-tdep.c: Remove _initialize_ppcfbsd_tdep prototype. * ppc-linux-nat.c: Remove _initialize_ppc_linux_nat prototype. * ppc-linux-tdep.c: Remove _initialize_ppc_linux_tdep prototype. * ppc-nbsd-nat.c: Remove _initialize_ppcnbsd_nat prototype. * ppc-nbsd-tdep.c: Remove _initialize_ppcnbsd_tdep prototype. * ppc-obsd-nat.c: Remove _initialize_ppcobsd_nat prototype. * ppc-obsd-tdep.c: Remove _initialize_ppcobsd_tdep prototype. * printcmd.c: Remove _initialize_printcmd prototype. * probe.c: Remove _initialize_probe prototype. * proc-api.c: Remove _initialize_proc_api prototype. * proc-events.c: Remove _initialize_proc_events prototype. * proc-service.c: Remove _initialize_proc_service prototype. * procfs.c: Remove _initialize_procfs prototype. * psymtab.c: Remove _initialize_psymtab prototype. * python/python.c: Remove _initialize_python prototype. * ravenscar-thread.c: Remove _initialize_ravenscar prototype. * record-btrace.c: Remove _initialize_record_btrace prototype. * record-full.c: Remove _initialize_record_full prototype. * record.c: Remove _initialize_record prototype. * regcache.c: Remove _initialize_regcache prototype. * reggroups.c: Remove _initialize_reggroup prototype. * remote-notif.c: Remove _initialize_notif prototype. * remote-sim.c: Remove _initialize_remote_sim prototype. * remote.c: Remove _initialize_remote prototype. * reverse.c: Remove _initialize_reverse prototype. * rl78-tdep.c: Remove _initialize_rl78_tdep prototype. * rs6000-aix-tdep.c: Remove _initialize_rs6000_aix_tdep prototype. * rs6000-lynx178-tdep.c: Remove _initialize_rs6000_lynx178_tdep prototype. * rs6000-nat.c: Remove _initialize_rs6000_nat prototype. * rs6000-tdep.c: Remove _initialize_rs6000_tdep prototype. * rust-exp.y: Remove _initialize_rust_exp prototype. * rx-tdep.c: Remove _initialize_rx_tdep prototype. * s390-linux-nat.c: Remove _initialize_s390_nat prototype. * s390-linux-tdep.c: Remove _initialize_s390_tdep prototype. * score-tdep.c: Remove _initialize_score_tdep prototype. * selftest-arch.c: Remove _initialize_selftests_foreach_arch prototype. * ser-go32.c: Remove _initialize_ser_dos prototype. * ser-mingw.c: Remove _initialize_ser_windows prototype. * ser-pipe.c: Remove _initialize_ser_pipe prototype. * ser-tcp.c: Remove _initialize_ser_tcp prototype. * ser-unix.c: Remove _initialize_ser_hardwire prototype. * serial.c: Remove _initialize_serial prototype. * sh-linux-tdep.c: Remove _initialize_sh_linux_tdep prototype. * sh-nbsd-nat.c: Remove _initialize_shnbsd_nat prototype. * sh-nbsd-tdep.c: Remove _initialize_shnbsd_tdep prototype. * sh-tdep.c: Remove _initialize_sh_tdep prototype. * skip.c: Remove _initialize_step_skip prototype. * sol-thread.c: Remove _initialize_sol_thread prototype. * solib-aix.c: Remove _initialize_solib_aix prototype. * solib-darwin.c: Remove _initialize_darwin_solib prototype. * solib-dsbt.c: Remove _initialize_dsbt_solib prototype. * solib-frv.c: Remove _initialize_frv_solib prototype. * solib-spu.c: Remove _initialize_spu_solib prototype. * solib-svr4.c: Remove _initialize_svr4_solib prototype. * solib-target.c: Remove _initialize_solib_target prototype. * solib.c: Remove _initialize_solib prototype. * source.c: Remove _initialize_source prototype. * sparc-linux-nat.c: Remove _initialize_sparc_linux_nat prototype. * sparc-linux-tdep.c: Remove _initialize_sparc_linux_tdep prototype. * sparc-nat.c: Remove _initialize_sparc_nat prototype. * sparc-nbsd-nat.c: Remove _initialize_sparcnbsd_nat prototype. * sparc-nbsd-tdep.c: Remove _initialize_sparcnbsd_tdep prototype. * sparc-obsd-tdep.c: Remove _initialize_sparc32obsd_tdep prototype. * sparc-sol2-nat.c: Remove _initialize_sparc_sol2_nat prototype. * sparc-sol2-tdep.c: Remove _initialize_sparc_sol2_tdep prototype. * sparc-tdep.c: Remove _initialize_sparc_tdep prototype. * sparc64-fbsd-nat.c: Remove _initialize_sparc64fbsd_nat prototype. * sparc64-fbsd-tdep.c: Remove _initialize_sparc64fbsd_tdep prototype. * sparc64-linux-nat.c: Remove _initialize_sparc64_linux_nat prototype. * sparc64-linux-tdep.c: Remove _initialize_sparc64_linux_tdep prototype. * sparc64-nat.c: Remove _initialize_sparc64_nat prototype. * sparc64-nbsd-nat.c: Remove _initialize_sparc64nbsd_nat prototype. * sparc64-nbsd-tdep.c: Remove _initialize_sparc64nbsd_tdep prototype. * sparc64-obsd-nat.c: Remove _initialize_sparc64obsd_nat prototype. * sparc64-obsd-tdep.c: Remove _initialize_sparc64obsd_tdep prototype. * sparc64-sol2-tdep.c: Remove _initialize_sparc64_sol2_tdep prototype. * spu-linux-nat.c: Remove _initialize_spu_nat prototype. * spu-multiarch.c: Remove _initialize_spu_multiarch prototype. * spu-tdep.c: Remove _initialize_spu_tdep prototype. * stabsread.c: Remove _initialize_stabsread prototype. * stack.c: Remove _initialize_stack prototype. * stap-probe.c: Remove _initialize_stap_probe prototype. * std-regs.c: Remove _initialize_frame_reg prototype. * symfile-debug.c: Remove _initialize_symfile_debug prototype. * symfile-mem.c: Remove _initialize_symfile_mem prototype. * symfile.c: Remove _initialize_symfile prototype. * symmisc.c: Remove _initialize_symmisc prototype. * symtab.c: Remove _initialize_symtab prototype. * target-dcache.c: Remove _initialize_target_dcache prototype. * target-descriptions.c: Remove _initialize_target_descriptions prototype. * thread.c: Remove _initialize_thread prototype. * tic6x-linux-tdep.c: Remove _initialize_tic6x_linux_tdep prototype. * tic6x-tdep.c: Remove _initialize_tic6x_tdep prototype. * tilegx-linux-nat.c: Remove _initialize_tile_linux_nat prototype. * tilegx-linux-tdep.c: Remove _initialize_tilegx_linux_tdep prototype. * tilegx-tdep.c: Remove _initialize_tilegx_tdep prototype. * tracefile-tfile.c: Remove _initialize_tracefile_tfile prototype. * tracefile.c: Remove _initialize_tracefile prototype. * tracepoint.c: Remove _initialize_tracepoint prototype. * tui/tui-hooks.c: Remove _initialize_tui_hooks prototype. * tui/tui-interp.c: Remove _initialize_tui_interp prototype. * tui/tui-layout.c: Remove _initialize_tui_layout prototype. * tui/tui-regs.c: Remove _initialize_tui_regs prototype. * tui/tui-stack.c: Remove _initialize_tui_stack prototype. * tui/tui-win.c: Remove _initialize_tui_win prototype. * tui/tui.c: Remove _initialize_tui prototype. * typeprint.c: Remove _initialize_typeprint prototype. * user-regs.c: Remove _initialize_user_regs prototype. * utils.c: Remove _initialize_utils prototype. * v850-tdep.c: Remove _initialize_v850_tdep prototype. * valarith.c: Remove _initialize_valarith prototype. * valops.c: Remove _initialize_valops prototype. * valprint.c: Remove _initialize_valprint prototype. * value.c: Remove _initialize_values prototype. * varobj.c: Remove _initialize_varobj prototype. * vax-bsd-nat.c: Remove _initialize_vaxbsd_nat prototype. * vax-nbsd-tdep.c: Remove _initialize_vaxnbsd_tdep prototype. * vax-tdep.c: Remove _initialize_vax_tdep prototype. * windows-nat.c: Remove _initialize_windows_nat, _initialize_check_for_gdb_ini, and _initialize_loadable prototypes. * windows-tdep.c: Remove _initialize_windows_tdep prototype. * xcoffread.c: Remove _initialize_xcoffread prototype. * xml-support.c: Remove _initialize_xml_support prototype. * xstormy16-tdep.c: Remove _initialize_xstormy16_tdep prototype. * xtensa-linux-nat.c: Remove _initialize_xtensa_linux_nat prototype. * xtensa-linux-tdep.c: Remove _initialize_xtensa_linux_tdep prototype. * xtensa-tdep.c: Remove _initialize_xtensa_tdep prototype. |
||
|
Yao Qi
|
7649770c8e |
Put selftests api into selftests namespace
This patch changes register_self_test to selftests::register_test, and run_self_tests to selftest::run_tests. gdb: 2017-08-18 Yao Qi <yao.qi@linaro.org> * selftest.c (register_self_test): Rename it to selftests::register_test. (run_self_tests): selftest::run_tests. * selftest.h: Update declarations. * selftest-arch.c (register_self_test_foreach_arch): Rename it to selftests::register_test_foreach_arch. * selftest-arch.h: Update declaration. * aarch64-tdep.c: Update. * arm-tdep.c: Likewise. * disasm-selftests.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2-frame.c: Likewise. * findvar.c: Likewise. * gdbarch-selftests.c: Likewise. * maint.c (maintenance_selftest): Likewise. * regcache.c: Likewise. * rust-exp.y: Likewise. * selftest-arch.c: Likewise. * unittests/environ-selftests.c: Likewise. * unittests/function-view-selftests.c: Likewise. * unittests/offset-type-selftests.c: Likewise. * unittests/optional-selftests.c: Likewise. * unittests/scoped_restore-selftests.c: Likewise. * utils-selftests.c: Likewise. |
||
|
Yao Qi
|
cfb7e58b48 |
Simplify regcache_cpy and remove regcache::cpy_no_passthrough
Nowadays, regcache_cpy is used where src is read-only and dst is not read-only, so the regcache_cpy can be simplified to handle this case only. As a result, regcache::cpy_no_passthrough, which is about two read-only regcache copy, is no longer used, remove it as well. gdb: 2017-07-18 Yao Qi <yao.qi@linaro.org> * regcache.c (regcache_cpy): Simplify it. (regcache::cpy_no_passthrough): Remove it. * regcache.h (cpy_no_passthrough): Remove it. (regcache_dup, regcache_cpy): Update comments. |
||
|
Yao Qi
|
6f98355cda |
extract/store integer function template
This patch converts functions extract_{unsigned,signed}_integer
to a function template extract_integer, which has two instantiations. It
also does the similar changes to store__{unsigned,signed}_integer,
regcache::raw_read_{unsigned,signed}, regcache::raw_write_{unsigned,signed},
regcache::cooked_read_{unsigned,signed},
regcache::cooked_write_{unsigned,signed}.
This patch was posted here
https://sourceware.org/ml/gdb-patches/2017-05/msg00492.html but the
problem was fixed in a different way. However, I think the patch is still
useful to shorten the code.
gdb:
2017-06-16 Alan Hayward <alan.hayward@arm.com>
Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* defs.h (RequireLongest): New.
(extract_integer): Declare function template.
(extract_signed_integer): Remove the declaration, but define it
static inline.
(extract_unsigned_integer): Likewise.
(store_integer): Declare function template.
(store_signed_integer): Remove the declaration, but define it
static inline.
(store_unsigned_integer): Likewise.
* findvar.c (extract_integer): New function template.
(extract_signed_integer): Remove.
(extract_unsigned_integer): Remove.
(extract_integer<LONGEST>, extract_integer<ULONGEST>): Explicit
instantiations.
(store_integer): New function template.
(store_signed_integer): Remove.
(store_unsigned_integer): Remove.
(store_integer): Explicit instantiations.
* regcache.c (regcache_raw_read_signed): Update.
(regcache::raw_read): New function.
(regcache::raw_read_signed): Remove.
(regcache::raw_read_unsigned): Remove.
(regcache_raw_read_unsigned): Update.
(regcache_raw_write_unsigned): Update.
(regcache::raw_write_signed): Remove.
(regcache::raw_write): New function.
(regcache_cooked_read_signed): Update.
(regcache::raw_write_unsigned): Remove.
(regcache::cooked_read_signed): Remove.
(regcache_cooked_read_unsigned): Update.
(regcache::cooked_read_unsigned): Remove.
(regcache_cooked_write_signed): Update.
(regcache_cooked_write_unsigned): Update.
* regcache.h (regcache) <raw_read_signed>: Remove.
<raw_write_signed, raw_read_unsigned, raw_write_unsigned>: Remove.
<raw_read, raw_write>: New.
<cooked_read_signed, cooked_write_signed>: Remove.
<cooked_write_unsigned, cooked_read_unsigned>: Remove.
<cooked_read, cooked_write>: New.
* sh64-tdep.c (sh64_pseudo_register_read): Update.
(sh64_pseudo_register_write): Update.
|
||
|
Tom Tromey
|
30a254669b |
Don't always zero pad in print_*_chars
This changes print_octal_chars and print_decimal_chars to never zero pad, and changes print_binary_chars and print_hex_chars to only optionally zero-pad, based on a flag. ChangeLog 2017-06-12 Tom Tromey <tom@tromey.com> PR exp/16225: * valprint.h (print_binary_chars, print_hex_chars): Update. * valprint.c (val_print_type_code_int): Update. (print_binary_chars): Add "zero_pad" argument. (emit_octal_digit): New function. (print_octal_chars): Don't zero-pad. (print_decimal_chars): Likewise. (print_hex_chars): Add "zero_pad" argument. * sh64-tdep.c (sh64_do_fp_register): Update. * regcache.c (regcache::dump): Update. * printcmd.c (print_scalar_formatted): Update. * infcmd.c (default_print_one_register_info): Update. 2017-06-12 Tom Tromey <tom@tromey.com> PR exp/16225: * gdb.reverse/i386-sse-reverse.exp: Update tests. * gdb.arch/vsx-regs.exp: Update tests. * gdb.arch/s390-vregs.exp (hex128): New proc. Update test. * gdb.arch/altivec-regs.exp: Update tests. |
||
Alan Hayward
|
50d6adef3b |
Remove MAX_REGISTER_SIZE from regcache.c
gdb/ * regcache.c (regcache::save): Avoid buffer use. (regcache::dump): Likewise. |
||
|
Alan Hayward
|
b057297ab6 |
Add regcache raw_supply_integer and raw_collect_integer.
Use these to replace instances of MAX_REGISTER_SIZE. * defs.h (copy_integer_to_size): New declaration. * findvar.c (copy_integer_to_size): New function. (do_cint_test): New selftest function. (copy_integer_to_size_test): Likewise. (_initialize_findvar): Likewise. * mips-fbsd-tdep.c (mips_fbsd_supply_reg): Use raw_supply_integer. (mips_fbsd_collect_reg): Use raw_collect_integer. * mips-linux-tdep.c (supply_32bit_reg): Use raw_supply_integer. (mips64_fill_gregset): Use raw_collect_integer (mips64_fill_fpregset): Use raw_supply_integer. * regcache.c (regcache::raw_supply_integer): New function. (regcache::raw_collect_integer): Likewise. * regcache.h: (regcache::raw_supply_integer): New declaration. (regcache::raw_collect_integer): Likewise. |
||
|
Yao Qi
|
e521e87e85 |
Move current_regcache to regcache::current_regcache
This patches moves global variable current_regcache to a class regcache static variable (protected) so that the unit test I add in the following patch can access it (by means of extending class regcache in unit test). gdb: 2017-05-24 Yao Qi <yao.qi@linaro.org> * regcache.c (current_regcache): Change it to regcache::current_regcache. (regcache_observer_target_changed): Update. (regcache_thread_ptid_changed): Make it a regcache static method. (regcache_thread_ptid_changed): Update. (class regcache_access): New. (current_regcache_test): Update. (_initialize_regcache): Update. * regcache.h: Include forward_list. (regcache): Declare regcache_thread_ptid_changed and declare registers_changed_ptid as friend. |
||
|
Yao Qi
|
94bb8dfe28 |
Use std::forward_list for current_regcache
gdb: 2017-05-09 Yao Qi <yao.qi@linaro.org> * regcache.c: Include <forward_list>. (struct regcache_list): Remove. (current_regcache): Update. (get_thread_arch_aspace_regcache): Update for std::forward_list. (regcache_thread_ptid_changed): Likewise. (registers_changed_ptid): Likewise. (current_regcache_size): Likewise. |
||
|
Yao Qi
|
8248946cc5 |
Add current_regcache unit test
This patch adds a unit test to current_regcache, to make sure it is correctly updated by get_thread_arch_aspace_regcache and registers_changed_ptid. gdb: 2017-05-09 Yao Qi <yao.qi@linaro.org> * regcache.c [GDB_SELF_TEST]: Include selftest.h. (current_regcache_size): New function. (current_regcache_test): New function. (_initialize_regcache) [GDB_SELF_TEST]: Register the unit test. |
||
|
Alan Hayward
|
f81fdd350e |
Remove MAX_REGISTER_SIZE from frv-linux-tdep.c
gdb/ * frv-linux-tdep.c (frv_linux_supply_gregset): Use raw_supply_zeroed. * regcache.c (regcache::raw_supply_zeroed): New function. * regcache.h (regcache::raw_supply_zeroed): New declaration. |
||
|
Yao Qi
|
deb1fa3eda |
Use tag dispatch regcache ctor in regcache_dup
This patch adds a tag dispatch ctor to create read-only regcache from a write-through regcache, also this patch deletes copy ctor and assignment operator. gdb: 2017-04-28 Yao Qi <yao.qi@linaro.org> Pedro Alves <palves@redhat.com> * regcache.c (regcache::regcache): New tag dispatch ctor. (do_cooked_read): Moved above. (regcache_dup): Use the tag dispatch ctor.. * regcache.h (regcache): Declare ctor, delete copy ctor and assignment operator, remove friend regcache_dup. |
||
|
Yao Qi
|
b421c83cb8 |
Simplify regcache_dup
regcache_dup, in fact, is to create a readonly regcache from a non-readonly regcache. This patch adds an assert that src is not readonly. gdb: 2017-04-28 Yao Qi <yao.qi@linaro.org> * regcache.c (regcache_dup): Assert !src->m_readonly_p and call method save instead of regcache_cpy. * regcache.h (struct regcache): Make regcache_dup a friend. |
||
|
Yao Qi
|
ef79d9a3c6 |
Class-fy regcache
This patch moves regcache declaration to regcache.h, and converts regcache apis to member functions, for example, regcache_invalidate is changed to regcache::invalidate. This patch also add "m_" prefix to these private fields. gdb: 2017-04-28 Yao Qi <yao.qi@linaro.org> * regcache.c (struct regcache): Move to regcache.h (regcache::arch): New method. (regcache_get_ptid): Update. (get_regcache_arch): Call arch method. (get_regcache_aspace): Call method aspace. (register_buffer): Change it to method. (regcache_save): Change it to regcache::save. (regcache_restore): Likewise. (regcache_cpy_no_passthrough): Remove the declaration. (regcache_cpy): Call methods restore and cpy_no_passthrough. (regcache_cpy_no_passthrough): Change it to method cpy_no_passthrough. (regcache_register_status): Change it to method get_register_status. (regcache_invalidate): Change it to method invalidate. (regcache_thread_ptid_changed): Use methods ptid and set_ptid. (regcache_raw_update): Change it to method raw_update. (regcache_raw_read): Likewise. (regcache_raw_read_signed): Likewise. (regcache_raw_read_unsigned): Likewise. (regcache_raw_write_signed): Likewise. (regcache_raw_write_unsigned): Likewise. (regcache_cooked_read): Likewise. (regcache_cooked_read_value): Likewise. (regcache_cooked_read_signed): Likewise. (regcache_cooked_read_unsigned): Likewise. (regcache_cooked_write_signed): Likewise. (regcache_cooked_write_unsigned): Likewise. (regcache_raw_set_cached_value): Likewise. (regcache_raw_write): Likewise. (regcache_cooked_write): Likewise. (regcache_xfer_part): Likewise. (regcache_raw_read_part): Likewise. (regcache_raw_write_part): Likewise. (regcache_cooked_read_part): Likewise. (regcache_cooked_write_part): Likewise. (regcache_raw_supply): Likewise. (regcache_raw_collect): Likewise. (regcache_transfer_regset): Likewise. (regcache_supply_regset): Likewise. (regcache_collect_regset): Likewise. (regcache_debug_print_register): Likewise. (enum regcache_dump_what): Move it to regcache.h. (regcache_dump): Change it to method dump. * regcache.h (enum regcache_dump_what): New. (class regcache): New. * target.c (target_fetch_registers): Call method debug_print_register. (target_store_registers): Likewise. |
||
|
Yao Qi
|
4621115fe5 |
Add constructor and destructor to regcache
This patch adds ctor and dtor to regcache. gdb: 2017-04-28 Yao Qi <yao.qi@linaro.org> * regcache.c (regcache::regcache): New function. (regcache::~regcache): New function. (regcache_xmalloc_1): Remove. (regcache_xmalloc): Call new regcache. (regcache_xfree): Call delete regcache. (get_thread_arch_aspace_regcache): Call new regcache. |
||
|
Yao Qi
|
4658f12e9c |
Change readonly_p to bool
This patch changes readonly_p type to bool. gdb: 2017-04-25 Yao Qi <yao.qi@linaro.org> * regcache.c (struct regcache) <readonly_p>: Change its type to bool. (regcache_xmalloc_1): Update parameter type and callers update. |
||
|
Yao Qi
|
4daf993d4d |
Simplify regcache_restore
This patches removes the 2nd argument of regcache_restore, because it is only called by regcache_cpy. In regcache_cpy, if regcache_restore is called, dst is not readonly, but src is readonly. So this patch adds an assert that src is readonly in regcache_restore. regcache_cook_read read everything from a readonly regcache cache (src)'s register_buffer, and register status is from ->register_status. gdb: 2017-04-21 Yao Qi <yao.qi@linaro.org> * regcache.c (regcache_restore): Remove argument 2. Replace argument 3 with regcache. Get register status from src->register_status and get register contents from register_buffer (src, regnum). (regcache_cpy): Update. |
||
|
Alan Hayward
|
ed771251e1 |
Remove MAX_REGISTER_SIZE from target.c
gdb/ * regcache.c (regcache_debug_print_register): New function. * regcache.h (regcache_debug_print_register): New declaration. * target.c (debug_print_register): Remove. (target_fetch_registers): Call regcache_debug_print_register. (target_store_registers): Likewise. |
||
|
Simon Marchi
|
3e00d44feb |
Remove some unnecessary inferior_ptid setting/restoring when fetching/storing registers
Now that the to_fetch_registers, to_store_registers and to_prepare_to_store target methods don't rely on the value of inferior_ptid anymore, we can remove a bunch of now unnecessary setting and restoring of inferior_ptid. The asserts added recently in target_fetch_registers and target_store_registers, which validate that inferior_ptid matches the regcache's ptid, must go away. It's the whole point of this effort, to not require inferior_ptid to have a particular value when calling these functions. One thing that I noticed is how sol-thread.c's ps_lgetregs and friends use the current value of inferior_ptid instead of what's passed as argument (ph->ptid), unlike proc-service.c's versions of the same functions. Is it expected? I left it like this in the current patch, but unless there's a good reason for it to be that way, I guess we should make it use the parameter. gdb/ChangeLog: * fbsd-tdep.c (fbsd_corefile_thread): Don't set/restore inferior_ptid. * proc-service.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs, ps_lsetfpregs): Likewise. * regcache.c (regcache_raw_update, regcache_raw_write): Likewise. * sol-thread.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs, ps_lsetfpregs): Likewise. * target.c (target_fetch_registers, target_store_registers): Remove asserts. |
||
Simon Marchi
|
ddaaf0fb86 |
Introduce regcache_get_ptid
This patch introduces the regcache_get_ptid function, which can be used to retrieve the ptid a regcache is connected to. It is used in subsequent patches. gdb/ChangeLog: * regcache.h (regcache_get_ptid): New function. * regcache.c (regcache_get_ptid): New function. |
||
|
Alan Hayward
|
8e3681243c |
Remove MAX_REGISTER_SIZE from remote.c
gdb/ * regcache.c (regcache_raw_update): New function. (regcache_raw_read): Move code to regcache_raw_update. * regcache.h (regcache_raw_update): New declaration. * remote.c (remote_prepare_to_store): Call regcache_raw_update. |
||
|
Pedro Alves
|
d7e747318f |
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
|
||
|
Alan Hayward
|
9890e4338d |
Use register_size () instead of MAX_REGISTER_SIZE
2017-01-18 Alan Hayward <alan.hayward@arm.com> * amd64-tdep.c (amd64_pseudo_register_read_value): remove MAX_REGISTER_SIZE. (amd64_pseudo_register_read_value): Likewise. * remote.c (fetch_register_using_p): Remove MAX_REGISTER_SIZE. (store_register_using_P): Likewise. * regcache.c (regcache_xfer_part): Likewise. |
||
Joel Brobecker
|
61baf725ec |
update copyright year range in GDB files
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
||
|
Yao Qi
|
9fd15b2e80 |
New regcache_raw_get_signed
This patch adds a new regcache api regcache_raw_get_signed. gdb: 2016-11-22 Yao Qi <yao.qi@linaro.org> * regcache.c (regcache_raw_get_signed): New function. * regcache.h (regcache_raw_get_signed): Declare. |
||
|
Pedro Alves
|
20aa2c606e |
Extend JIT-reader test and fix GDB problems that exposes
The jit-reader.exp test isn't really exercising the jit-reader's
unwinder API at all. This commit address that, and then fixes GDB
problems exposed.
- The custom JIT reader provided for the jit-reader.exp testcase
always rejects the jitted function's frame...
This is because the custom JIT reader in the testcase never ever
sets state->code_begin/end, so the bounds check in
gdb.base/jitreader.c:unwind_frame:
if (this_ip >= state->code_end || this_ip < state->code_begin)
return GDB_FAIL;
tends to fail, unless you're "lucky" (because it references
uninitialized data).
The result is that GDB is always actually using a built-in unwinder
for the jitted function.
- The provided unwinder doesn't do anything that GDB's built-in
unwinder can't do.
IOW, we can't really tell whether the JIT reader's unwinder is
working or not.
I fixed that by making the jitted function mangle its own stack
pointer with a xor, and then teaching the jit unwinder to demangle
it back (another xor). So now "backtrace" with GDB's built-in
unwinder fails while with the jit unwinder, it succeeds.
- GDB crashes after unloading the JIT reader, and flushing frames...
I made the testcase use the "flushregs" command after unloading the
JIT reader, to force the JIT frames to be flushed. However, that
crashes GDB...
When reinit_frame_cache tears down a frame's cache, it calls its
unwinder's dealloc_cache method, which for JIT frames ends up in
jit.c:jit_dealloc_cache. This function calls each of the frame's
gdb_reg_value's "free" pointer:
for (i = 0; i < gdbarch_num_regs (frame_arch); i++)
if (priv_data->registers[i] && priv_data->registers[i]->free)
priv_data->registers[i]->free (priv_data->registers[i]);
and the problem is these gdb_reg_value instances have been returned
by the JIT reader that has been already unloaded, and their "free"
function pointers likely point to functions in the DSO that has
already been unloaded...
A fix for that could be to call reinit_frame_cache in
jit_reader_unload_command _before_ unloading the jit reader DSO so
that the jit reader is given a chance to clean up the gdb_reg_values
before it is unloaded. However, the fix for the point below makes
this unnecessary, because it stops jit.c from keeping around
gdb_reg_values in the first place.
- However, it still makes sense to clear the frame cache when loading
or unloading a JIT unwinder.
This makes testing a JIT unwinder a bit simpler.
- Not only the frame cache actually -- gdb is not unloading the
jit-registered objfiles when the JIT reader is unloaded, and not
loading the already-registered descriptors when a JIT reader is
loaded.
The new test exercises unloading the jit reader, loading it back
again, and then making sure the JIT reader's unwinder works again.
Without the unload/re-load of already-read descriptors, the newly
loaded JIT would have no idea where the new function is, because
it's stored at symbol read time.
- I added a couple "info frame" calls to the test, and that
crashes GDB...
The problem is that jit_frame_prev_register assumes it'll only be
called for raw registers, so when it gets a pseudo register number,
the "priv->registers[reg]" access is really an out-of-bounds access.
To fix that, I made jit_frame_prev_register use
gdbarch_pseudo_register_read_value for reading the pseudo-registers.
However, that works with a regcache and we don't have one. To fix
that, I made the JIT unwinder store a regcache in its cache instead
of an array of gdb_reg_value pointers.
gdb/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* jit.c (jit_reader_load_command): Call reinit_frame_cache and
jit_inferior_created_hook.
(jit_reader_unload_command): Call reinit_frame_cache and
jit_inferior_exit_hook.
* jit.c (struct jit_unwind_private) <registers>: Delete field.
<regcache>: New field.
(jit_unwind_reg_set_impl): Set the register's value in the
regcache. Free the passed-in gdb_reg_value.
(jit_dealloc_cache): Adjust to free the regcache.
(jit_frame_sniffer): Allocate a regcache instead of an array of
gdb_reg_value pointers.
(jit_frame_this_id): Adjust.
(jit_frame_prev_register): Read raw registers off of the regcache
instead of from the gdb_reg_value pointer array. Use
gdbarch_pseudo_register_read_value to read pseudo registers.
* regcache.c (regcache_raw_set_cached_value): New function,
factored out from ...
(regcache_raw_write): ... here.
* regcache.h (regcache_raw_set_cached_value): Declare.
gdb/testsuite/ChangeLog:
2016-07-01 Pedro Alves <palves@redhat.com>
* gdb.base/jit-reader.exp (info_registers_current_frame): New
procedure.
(jit_reader_test): Test the jit reader's unwinder.
* gdb.base/jithost.c (jit_function_00_code): New global.
(main): Use memcpy to fill in the mmapped code, instead of poking
bytes manually here.
* gdb.base/jitreader.c (enum register_mapping) <AMD64_RBP>: New
value.
(read_debug_info): Save the function's range.
(read_sp): New function.
(unwind_frame): Use it. Also unwind RBP.
(get_frame_id): Use read_sp.
(gdb_init_reader): Use calloc instead of malloc.
* lib/gdb.exp (get_hexadecimal_valueof): Add optional 'test'
parameter. Use gdb_test_multiple.
|
||
|
Joel Brobecker
|
618f726fcb |
GDB copyright headers update after running GDB's copyright.py script.
gdb/ChangeLog:
Update year range in copyright notice of all files.
|
||
Antoine Tremblay
|
68ce205943 |
Share regcache function regcache_raw_read_unsigned
This patch is in preparation for software single step support on ARM in
GDBServer. It adds a new shared function regcache_raw_read_unsigned and
regcache_raw_get_unsigned so that GDB and GDBServer can use the same call
to fetch a raw register into an integer.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(COMMON_OBS): Append common/common-regcache.o.
(common-regcache.o): New rule.
* common/common-regcache.h (register_status) New enum.
(regcache_raw_read_unsigned): New declaration.
* common/common-regcache.c: New file.
* regcache.h (enum register_status): Move to common-regcache.h.
(regcache_raw_read_unsigned): Likewise.
(regcache_raw_get_unsigned): Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append common/common-regcache.c.
(OBS): Append common-regcache.o.
(common-regcache.o): New rule.
* regcache.c (init_register_cache): Initialize cache to
REG_UNAVAILABLE.
(regcache_raw_read_unsigned): New function.
* regcache.h (REG_UNAVAILABLE, REG_VALID): Replaced by shared
register_status enum.
|