* hw_htab.c (htab_map_binary): Don't try to map the text section
when it is empty.
* emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
CHIRP_LOAD_BASE.
(emul_chirp_create): Map in the interrupt table.
* lib/sim-defs.exp (run_sim_test): Include a description such as
"assembling" or "linking" that identifies the phase a test fails
in, for easier analysis of failures.
* interp.c (sim_resume): New function from sim-resume.c, install
the stepping event after having processed the pending ticks.
(has_stepped): Likewise.
(sim_info): Produce an output only if verbose or STATE_VERBOSE_P.
pending interrupts.
* interrupts.c (interrupts_process): Keep track of the last number
of masked insn cycles.
(interrupts_initialize): Clear last number of masked insn cycles.
(interrupts_info): Report them.
(interrupts_update_pending): Compute clear and set masks of
interrupts and clear the interrupt bits before setting them
(due to SCI interrupt sharing).
* interrupts.h (struct interrupts): New members last_mask_cycles
and xirq_last_mask_cycles.
2001-04-18 matthew green <mrg@redhat.com>
* armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
(read_cp15_reg): Make non-static.
(XScale_cp15_LDC): Update for write_cp15_reg() change.
(XScale_cp15_MCR): Likewise.
(XScale_cp15_write_reg): Likewise.
(XScale_check_memacc): New function. Check for breakpoints being
activated by memory accesses. Does not support the Branch Target
Buffer.
(XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
(XScale_debug_moe): New function. Set the debug Method Of Entry,
if configured.
(write_cp14_reg): Reset count counter if requested.
* armdefs.h (struct ARMul_State): New members `LastTime' and
`CP14R0_CCD' used for the timer/counters.
(ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
defines for XScale registers.
(XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
(ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
(ARMul_Emulate32): Handle the clock counter and hardware instruction
breakpoints. Call XScale_set_fsr_far() for software breakpoints and
software interrupts.
(LoadMult): Call XScale_set_fsr_far() for data aborts.
(LoadSMult): Likewise.
(StoreMult): Likewise.
(StoreSMult): Likewise.
* armemu.h (write_cp15_reg): Update prototype.
* arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
(ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
register 0.
* armvirt.c (GetWord): Call XScale_check_memacc().
(PutWord): Likewise.
PENDING_FILL. Use PENDING_SCHED directly to handle the pending
set of the FCSR.
* sim-main.h (COCIDX): Remove definition; this isn't supported by
PENDING_FILL, and you can get the intended effect gracefully by
calling PENDING_SCHED directly.
2001-03-16 Frank Ch. Eigler <fche@redhat.com>
Add support for mmap-based memory regions.
* sim-memopt.c (mmap_next_fd): New global.
(sim_memory_init): Reinitialize it.
(OPTION_MEMORY_MAPFILE, memory_option_handler): Support new
"--memory-mapfile FILE" option. Check for some errors.
(do_memopt_add): Conditionally do mmap instead of malloc for
backing store of simulated memory. Check for more errors.
(do_simopt_delete, sim_memory_uninstall): Corresponding cleanup.
* sim-memopt.h (munmap_length): New member of _sim_memopt.
* configure.in: Look for mmap/fstat related functions and headers.
* config.in, configure: Regenerated.
2001-02-09 Ben Elliston <bje@redhat.com>
* (profile_print_pc): Write header out in target byte order.
2001-02-09 Ben Elliston <bje@redhat.com>
* sim-profile.c (profile_pc_init): Correct bug in loop logic when
adjusting the pc shift value.
later inspection by the trap handler.
(count_argc): New function.
(prog_argv): Declare static.
(sim_write): Declare.
(trap): Implement argc, argnlen and argn system calls. Do not
abort on unknown system calls--simply return -1.
* syscall.h (SYS_argc, SYS_argnlen, SYS_argn): Define.
[common/ChangeLog]
2001-01-12 Chris Demetriou <cgd@sibyte.com>
* aclocal.m4 (SIM_AC_OPTION_SCACHE): Properly
handle the case where a numeric value is supplied.
[eg. m32r/ChangeLog]
2001-01-12 Frank Ch. Eigler <fche@redhat.com>
* configure: Regenerated with sim_scache fix.
* sim-fpu.h (sim_fpu_printn_fpu): Declare.
* sim-fpu.c (print_bits): Add digits parameter. Print only as many
trailing digits as specified (-1 to print all digits).
(sim_fpu_print_fpu): New wrapper around sim_fpu_printn_fpu.
(sim_fpu_printn_fpu): Rename from sim_fpu_print_fpu; update calls
to print_bits ().
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
In sim/ppc:
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
* lib/sim-defs.exp (run_sm_test): Correct comment. "output" and
"xerror" options do not use a list of machines. Clear options from
previous test case. Use "$cpu_option" to identify the machine to the
assembler, if specified.
* cgen.sh: Handle an isa argument between cpu and mach. Default to
`all'. Pass `-i' options to cgen applications.
* Make-common.in (cgen-arch, cgen-cpu, cgen-decode, cgen-cpu-decode,
cgen-desc): Pass $(isa) to cgen.sh.
2000-10-19 Frank Ch. Eigler <fche@redhat.com>
On advice from Chris G. Demetriou <cgd@sibyte.com>:
* sim-main.h (GPR_CLEAR): Remove unused alternative macro.
* dv-m68hc11tim.c (cycle_to_string): New function to translate
the cpu cycle into some formatted time string.
(m68hc11tim_print_timer): Use it.
* dv-m68hc11sio.c (m68hc11sio_info): Use cycle_to_string.
* dv-m68hc11spi.c (m68hc11spi_info): Likewise.
* interrupts.c (interrupts_info): Likewise.
* m68hc11_sim.c (cpu_info): Likewise.
* sim-profile.h (PROFILE_DATA): Add cpu_freq.
(PROFILE_CPU_FREQ): New macro.
* sim-profile.c (OPTION_PROFILE_CPU_FREQUENCY): New enumerator.
(profile-options): Add profile-cpu-frequency.
(parse_frequency): New function.
(profile_option_handler): Handle OPTION_PROFILE_CPU_FREQUENCY.
(profile_print_speed): Print cpu frequency and simulated execution time.
Re-indent other items to match.
(movm): Initialize PC and mask.
(mov, movbu, movhu): Set srcreg2 from RI0.
(bsch): Initialize c.
(sat16_cmp): Actually do the comparison.
(mov_llt): Do not overwrite dstreg with uninitialized variable.
* sim-events.c (sim_events_remain_time): New function returning
the time that remains before the event is raised.
* hw-events.c (hw_event_remain_time): Likewise.
* sim-events.h (sim_events_remain_time): Declare.
* hw-events.h (hw_event_remain_time): Declare.
* sim-hw.c: Use <errno.h> instead of <sys/errno.h>
(OPTION_HW_LIST): New option --hw-list to list the devices.
(hw_option_handler): List the device tree with 'sim_hw_print'.
* sim-bits.h (_MSB_16, _LSB_16): Define for 16-bit targets.
(MASK, LSBIT, MSBIT): Likewise and use _MSB_16 and _LSB_16.
(EXTENDED): Define for 16-bit word size.
* sim-bits.c (LSEXTRACTED, MSEXTRACTED, LSINSERTED,
MSINSERTED, LSSEXT, MSSEXT): Implement for 16-bit word size.
* sim-types.h: Added support for 16-bit targets.
(ARM_Strong_Prop, STRONGARM): Define.
* arminit.c (ARMul_NewState): Reset is_StrongARM.
(ARMul_SelectProcessor): Set is_StrongARM.
* wrapper.c (sim_create_inferior): Use bfd machine type to
determine processor type to emulate.
* armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC
when emulating StrongARM.
(SET_ABORT): Save CPSR in SPSR and set LR.
* armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
(WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
* arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
* armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
modify PC. Moved the existing logic...
(WriteR15Branch): ... here. New function.
(WriteR15, WriteSR15): Drop the two least significant bits.
(LoadSMult): Use WriteR15Branch() to modify PC.
(LoadMult): Use WRITEDESTB() instead of WRITEDEST().
* armsupp.c (ARMul_CPSRAltered): Zero out bits as they're
extracted from state->Cpsr, but preserve the unused bits.
(ARMul_GetCPSR): Get bits preserved in state->Cpsr.
(ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to
get the full CPSR word.
(SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
(SETPSR, SET_INTMODE, SETCC): Removed.
* armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
mask. Use SETPSR_* to modify PSR.
(ARMul_SetCPSR): Load all bits from value.
* armemu.c (ARMul_Emulate, msr): Do not test bit mask.
