Commit Graph

5176 Commits

Author SHA1 Message Date
Jim Kingdon
dee803840d * top.c, utils.c, main.c: Replace error_pre_print with two
variables: error_pre_print (for RETURN_ERROR) and quit_pre_print
	(for RETURN_QUIT).  Fixes a bug whereby typing ^C (e.g. in "maint
	print sym") could output extraneous stuff.
	* objfiles.c: Don't declare error_pre_print; defs.h does it.
1995-04-04 20:07:21 +00:00
Stu Grossman
3da4297eae * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag.
* monitor.c (monitor_read_memory):  Use previously mentioned flag
	to send proper format memory examine commands to the w89k monitor.
	Also, try to handle bizarre format of memory dump...

	* op50-rom.c w89k-rom.c:  Update to new monitor.[ch] conventions.
1995-04-03 21:03:27 +00:00
Peter Schauer
4507de2d18 * gdb.base/list.exp: Adjust some alternate expect patterns to
match recent list0.c change. Add alternate expect pattern for
	output from `list default lines around main' for optimizing
	compilers.
1995-04-02 15:22:04 +00:00
Jim Kingdon
24b2699965 * lib/gdb.exp: If nosignals is not set, set it to 0. 1995-04-01 15:31:24 +00:00
Peter Schauer
576c39135f * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
Handle relocated symbol address.
	* partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING:
	Do not relocate a zero address.
1995-04-01 11:24:43 +00:00
Kung Hsu
241b4dff18 * config/slite-gdb.exp: Responds to load symbol table prompt.
* gdb.base/break.exp: Adjust line number, fix rerun.
        * gdb.base/langs0.c: Add #ifdef usestubs.
1995-04-01 00:17:52 +00:00
Kung Hsu
4d1edc2e85 * gdb.base/break.exp: Adjust line number, fix rerun.
* gdb.base/langs0.c: Add #ifdef usestubs.
1995-04-01 00:17:12 +00:00
Kung Hsu
4729c3e2ca * config/slite-gdb.exp: Responds to load symbol table prompt. 1995-04-01 00:16:39 +00:00
Jim Kingdon
7c7c4f0a22 * config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it
is nowhere used.
1995-03-31 03:58:27 +00:00
Jim Kingdon
23a1346e20 * stabsread.c (read_range_type): Remove FIXME comment about
type-id (I presume this meant a number followed by = followed by a
	type) versus type number; Per fixed it.
1995-03-31 03:52:28 +00:00
Kung Hsu
a04abeccfc * gdb.base/list.exp: Adjust line contents after adding new lines in
list0.c. Also fix a syntax error.
1995-03-31 02:09:59 +00:00
Kung Hsu
6413ee42db * lib/gdb.exp (gdb_run_cmd): Special handling for targets use stubs.
* gdb.base/break.exp: ditto.
        * gdb.base/list.exp: ditto.
        * gdb.base/bitfields.c: Add #ifdef usestubs in main().
        * gdb.base/run.c: ditto.
        * gdb.base/list0.c: ditto.
        * gdb.base/funcargs.c: ditto.
1995-03-31 00:43:47 +00:00
Kung Hsu
065924f7de * lib/gdb.exp (gdb_run_cmd): Special handling for targets use stubs. 1995-03-31 00:43:12 +00:00
Stu Grossman
f66a790207 Move testsuite entries from gdb's ChangeLog to here. 1995-03-30 18:03:04 +00:00
Stu Grossman
194559c48a Move testsuite entries into testsuite/ChangeLog. 1995-03-30 18:00:19 +00:00
Stan Shebs
1e1dd17536 Wed Mar 29 09:56:04 1995 Jason Molenda (crash@phydeaux.cygnus.com)
* configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*.
1995-03-30 03:09:35 +00:00
Stan Shebs
a2f0cf2f40 * remote-e7000.c (why_stop): Add new kinds of strings to expect
from the emulator.
	(e7000_wait): Add interpretations for more stop reasons,
	including warnings for write protect and cycle address errors.
1995-03-30 02:43:50 +00:00
Stu Grossman
a706069fdb start-sanitize-gdbtk
* Makefile.in (gdbtk.o):  Use X11_CFLAGS to provide alternate
	locations (per-host) for X11 include files.
	* config/pa/hppahpux.mh (XM_CLIBS):  Add -L/usr/lib/X11R5 to force
	the use of R5 libs.  (X11_CFLAGS):  Add this to indicate the locs
	of the R5 include files.
end-sanitize-gdbtk
	* monitor.c monitor.h remote-est.c rom68k-rom.c:  Add start of
	support for interrupting target.
	* monitor.c (monitor_open):  Send stop command before doing
	anything else.
	* (monitor_load_srec):  Fix record size calculation to prevent end
	of segment from getting trashed.
	* rom68k-rom.c:  Update to latest version of struct monitor_ops.
	* config/sparc/tm-sparc.h (FIX_CALL_DUMMY):  Fix byte-order
	problems.  Makes DOS hosted function calling work.
	* sparclite/crt0.s:  Define _start to make COFF happy.
	* testsuite/config/rom68k.exp (gdb_target_rom68k):  Use
	$targetname, $serialport and $baud instead of hardwired variables.
	* testsuite/gdb.base/{sigall.exp signals.exp}:  Skip these if the
	target doesn't support signals.
1995-03-30 01:47:32 +00:00
Kung Hsu
3c23a941c3 * lib/gdb.exp (runto_main): Fix regular expression bug, add return 1. 1995-03-29 20:31:26 +00:00
Michael Meissner
3e8fdb61ce Do not declare atof if it is a macro. 1995-03-29 14:13:43 +00:00
Peter Schauer
e137e850dc * rs6000-tdep.c (skip_prologue): Skip saving of LR and CR in
the stack frame, fix typos in `st rx,NUM(r1)' and `stu r1,NUM(r1)'
	tests.
1995-03-29 08:16:05 +00:00
Per Bothner
09dde10060 * pr-6632.ch, pr-6632-grt.ch, pr-6632.exp, Makefile.in: New test case. 1995-03-29 01:15:04 +00:00
Per Bothner
e55a579687 * gdbtypes.c (create_range_type): If indextype has TYPE_FLAG_STUB
set, set TYPE_FLAG_TARGET_STUB.
	(check_stub_type):  Recalculate TYPE_LENGTH for range type.
	* stabsread.c (read_range_type):  If index type number is followed
	by '=', back up, call read_type. and assume we have a true range.
	* gdbtypes.h (TYPE_FLAG_TARGET_STUB):  Update comment.
This fixes PR 6632.
1995-03-29 01:11:45 +00:00
J.T. Conklin
7d777b91ad * remote.texi (NetWare): Changed example to use BOARD= instead of
NODE= argument to reflect correspoding change to gdbserve.nlm.
1995-03-29 00:57:44 +00:00
Jim Kingdon
d87e77066f * gdb.base/recurse.exp: Make test names unique. Change \\(+ to \\(.
Don't rely on the value of an auto variable before it has been
	initialized.  Use gdb_test more.
1995-03-28 17:33:10 +00:00
Peter Schauer
5522e8a977 * config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
Fix definitions.
1995-03-28 06:58:39 +00:00
Peter Schauer
3f403f6ab3 * alpha-nat.c, irix4-nat.c, irix5-nat.c, mipsv4-nat.c,
sparc-tdep.c (supply_gregset, supply_fpregset):  Fill inaccessible
	registers with zero to handle recent read_register_bytes change.
	* irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset,
	fill_gregset):  Fix handling of CAUSE_REGNUM.
	* mips-nat.c (store_inferior_registers):  Handle unwritable
	registers when storing a single register.
	* config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
	Fix definitions.

	* mdebugread.c (parse_symbol, psymtab_to_symtab_1):  Clear
	allocated mips_extra_func_info, if the debug info is corrupt,
	the PDR to fill it in might be missing.
1995-03-28 06:57:39 +00:00
Kung Hsu
3b94a0b871 * vx-share/regPacket.h: a new file interfacing with vxworks. 1995-03-27 22:47:04 +00:00
Jim Kingdon
b34b32e7f9 * lib/gdb.exp (default_gdb_version): A version number must start
with a digit, but other than that contains all characters up to
	the first whitespace character.
1995-03-27 16:05:08 +00:00
Jim Kingdon
d894a6e99b * gdb.base/commands.exp (breakpoint_command_test): New tests. 1995-03-26 21:43:41 +00:00
Jim Kingdon
d582898a7d * breakpoint.c (bpstat_do_actions): Once we've executed the
commands, set bs->commands to NULL.
1995-03-26 21:39:51 +00:00
Jim Kingdon
74cb8a369b * gdb.c++/*.exp: Warn if executable does not exist. The original
reason for skipping the warning was that configure.in sometimes
	intentionally skipped building the executables but the tcl code
	had no way of knowing.  That (a) was always bogus with respect to
	error handling, (b) is no longer true (right now there is no way
	to skip C++ tests).

	* gdb.c++/demangle.exp: Remove unused binfile and srcfile variables.
1995-03-25 23:46:43 +00:00
Peter Schauer
766de354a8 * gdb.base/list.exp: Add expect patterns for output from
SunPRO compiled executables.
	* gdb.base/whatis.exp:  Allow leading `signed' for all v_signed_*
	types.
1995-03-25 09:26:16 +00:00
Peter Schauer
736268e5fa * sparc-tdep.c, config/sparc/tm-sun4sol2.h
(sunpro_static_transform_name):  Renamed from
	solaris_static_transform_name.
	* config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
	Define to sunpro_static_transform_name for acc 3.0 compiled
	executables.
1995-03-25 09:25:06 +00:00
Peter Schauer
b9e585030c * buildsym.c (patch_subfile_name): Update last_source_file
with the real source file name.
	* dbxread.c (end_psymtab):  Handle static functions in the
	SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
	to lookup_minimal_symbol.
	(process_one_symbol):  Ignore extra outermost context from
	SunPRO cc and acc.
	* stabsread.c (define_symbol):  Do not complain for SunPRO
	static variable encoding if STATIC_TRANSFORM_NAME is defined.
	* sparc-tdep.c, config/sparc/tm-sun4sol2.h
	(sunpro_static_transform_name):  Renamed from
	solaris_static_transform_name.
	* config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
	Define to sunpro_static_transform_name for acc 3.0 compiled
	executables.
	* procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
	Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
	if defined.
	* procfs.c (info_proc_siginfo):  Cast sip->si_addr to
	`unsigned long' and use `lx' format for printing it.
1995-03-25 09:23:10 +00:00
Jim Kingdon
62f2c80802 * gdb.base/break.exp (test_next_with_recursion): Accept any line
number (we are already testing that the correct source line text
	gets printed).

	* gdb.base/break.exp: Make one test if $usestubs.  I'm not sure
	that is what is intended, but something needed to be done to get
	sunos4 native working again.

	* gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef).
1995-03-25 06:01:20 +00:00
Stu Grossman
1a7f57e783 * configure.in: Move test for m68*-est-* before m68*-*-coff*.
* findvar.c:  Move default def of CANNOT_STORE_REGISTER closer to
	the beginning of the code.
	* (write_register_gen):  New routine.  Analogous to
	read_register_gen.
	* (write_register_bytes):  Another rewrite!  Make it smarter about
	not updating regs with the same value.
	* monitor.c (printf_monitor readchar):  Use stderr instead of
	stdout to output debug info.  Also cleanup readchar a little.
	* (expect):  Make sure that excessive responses are null
	terminated.
	* (monitor_open):  Check for magic number in monitor_ops struct.
	Allow multiple commands as init strings.  Also, clear all
	breakpoints.
	* (monitor_resume monitor_wait):  Send a command to dump all the
	regs for those targets which don't do so when waking up after a
	continue command.
	* (monitor_wait):  Handle excessive response output better.
	* (monitor_write_memory):  Use block fill, word, and long word
	commands (if they exist) to write memory more efficiently.
	* General cleanups to use flag bits instead of individual flag
	words in monitor_ops struct.
	* (monitor_command):  Return output from command.
	* (monitor_load_srec):  Allocate buffer only once.  Use alloca.
	Wait for load response string instead of using a timeout to start
	sending S-records.  Fix bug where value of srec_frame shrinks.  If
	hashmark is set, print `-' for retransmissions.  General cleanups.
	* (monitor_make_srec):  Get rid of S-record default type kludge.
	* monitor.h:  Use seperate struct for memory and register
	read/write commands.  Memory commands can come in byte, word,
	long, and longlong forms.
	* (monitor_ops):  Change lots of fields.  Generalize some stuff.
	Put all flags into flags word.  Allow init to be a list of commands.
	Add command for clearing all breakpoints, block fill, dumping all
	registers.
	* remote-est.c:  Rewrite to use new monitor conventions.
	* config/m68k/est.mt (TDEPFILES):  Add monitor.o.
	* config/m68k/tm-est.h:  Set NUM_REGS to 18.
	* testsuite/gdb.base/break.exp:  Lots of cleanups.  Use gdb_test
	more thoroughly.
1995-03-25 00:41:54 +00:00
Stu Grossman
8acb0655a0 New file for controlling the EST. 1995-03-25 00:37:09 +00:00
Stu Grossman
a25a9f49ca * configure.in: Move test for m68*-est-* before m68*-*-coff*.
* findvar.c:  Move default def of CANNOT_STORE_REGISTER closer to
	the beginning of the code.
	* (write_register_gen):  New routine.  Analogous to
	read_register_gen.
	* (write_register_bytes):  Another rewrite!  Make it smarter about
	not updating regs with the same value.
	* monitor.c (printf_monitor readchar):  Use stderr instead of
	stdout to output debug info.  Also cleanup readchar a little.
	* (expect):  Make sure that excessive responses are null
	terminated.
	* (monitor_open):  Check for magic number in monitor_ops struct.
	Allow multiple commands as init strings.  Also, clear all
	breakpoints.
	* (monitor_resume monitor_wait):  Send a command to dump all the
	regs for those targets which don't do so when waking up after a
	continue command.
	* (monitor_wait):  Handle excessive response output better.
	* (monitor_write_memory):  Use block fill, word, and long word
	commands (if they exist) to write memory more efficiently.
	* General cleanups to use flag bits instead of individual flag
	words in monitor_ops struct.
	* (monitor_command):  Return output from command.
	* (monitor_load_srec):  Allocate buffer only once.  Use alloca.
	Wait for load response string instead of using a timeout to start
	sending S-records.  Fix bug where value of srec_frame shrinks.  If
	hashmark is set, print `-' for retransmissions.  General cleanups.
	* (monitor_make_srec):  Get rid of S-record default type kludge.
	* monitor.h:  Use seperate struct for memory and register
	read/write commands.  Memory commands can come in byte, word,
	long, and longlong forms.
	* (monitor_ops):  Change lots of fields.  Generalize some stuff.
	Put all flags into flags word.  Allow init to be a list of commands.
	Add command for clearing all breakpoints, block fill, dumping all
	registers.
	* remote-est.c:  Rewrite to use new monitor conventions.
	* config/m68k/est.mt (TDEPFILES):  Add monitor.o.
	* config/m68k/tm-est.h:  Set NUM_REGS to 18.
	* testsuite/gdb.base/break.exp:  Lots of cleanups.  Use gdb_test
	more thoroughly.
1995-03-25 00:36:01 +00:00
Jim Kingdon
1ef0c066d9 * gdb.base/a1-selftest.exp (test_with_self): Remove comment which
apparently went with a (very) old xfail.
1995-03-24 23:06:46 +00:00
Kung Hsu
c86bd3d41b * gdb.base/callfuncs.exp: call runto_main instead of runto main.
runto_main is a proc in gdb.exp that will do 'step' for target use
        stubs.
        * gdb.base/exprs.exp: ditto.
        * gdb.base/interrupt.exp: ditto.
        * gdb.base/opaque.exp: ditto.
        * gdb.base/printcmds.exp: ditto.
        * gdb.base/ptype.exp: ditto.
        * gdb.base/scope.exp: ditto.
        * gdb.base/setvar.exp: ditto.
        * gdb.base/signals.exp: ditto.
        * gdb.base/twice.exp: ditto.
        * gdb.base/break.exp: no run and hit main for stubs. Change line
        numbers for breakpoints and info breakpoint.
        * gdb.base/break.c: Add #ifdef usestubs for set_debug_traps() and
        breakpoint().
        * gdb.base/callfuncs.c: ditto.
        * gdb.base/exprs: ditto.
        * gdb.base/interrupt.c: ditto.
        * gdb.base/opaque0.c: ditto.
        * gdb.base/printcmds.c: ditto.
        * gdb.base/ptype.c: ditto.
        * gdb.base/scope0.c: ditto.
        * gdb.base/setvar.c: ditto.
        * gdb.base/signals.c: ditto.
        * gdb.base/twice.c: ditto.
1995-03-24 22:06:00 +00:00
Kung Hsu
a302b5c219 * gdb.base/callfuncs.exp: call runto_main instead of runto main.
runto_main is a proc in gdb.exp that will do 'step' for target use
        stubs.
        * gdb.base/exprs.exp: ditto.
        * gdb.base/interrupt.exp: ditto.
        * gdb.base/opaque.exp: ditto.
        * gdb.base/printcmds.exp: ditto.
        * gdb.base/ptype.exp: ditto.
        * gdb.base/scope.exp: ditto.
        * gdb.base/setvar.exp: ditto.
        * gdb.base/signals.exp: ditto.
        * gdb.base/twice.exp: ditto.
        * gdb.c++/classes.exp: ditto.
        * gdb.c++/inherit.exp: ditto.
        * gdb.c++/templates.exp: ditto.
        * gdb.base/break.exp: no run and hit main for stubs. Change line
        numbers for breakpoints and info breakpoint.
        * gdb.base/break.c: Add #ifdef usestubs for set_debug_traps() and
        breakpoint().
        * gdb.base/callfuncs.c: ditto.
        * gdb.base/exprs: ditto.
        * gdb.base/interrupt.c: ditto.
        * gdb.base/opaque0.c: ditto.
        * gdb.base/printcmds.c: ditto.
        * gdb.base/ptype.c: ditto.
        * gdb.base/scope0.c: ditto.
        * gdb.base/setvar.c: ditto.
        * gdb.base/signals.c: ditto.
        * gdb.base/twice.c: ditto.
        * gdb.c++/misc.cc: ditto.
        * gdb.c++/templates.cc: ditto.
1995-03-24 22:02:15 +00:00
Jim Kingdon
8c7ab5da73 * config/vx-gdb.exp, lib/gdb.exp: Regexp cleanups (\[(\] -> \\(, etc.). 1995-03-24 20:05:28 +00:00
Jim Kingdon
ac35a0030e * gdb.base/a1-selftest.exp: Don't check for # followed by a digit
somewhere between `read' and `main.c'.  I'm pretty sure the
	pattern ".*#\[0-9\].*" was slowing down pattern matching a lot,
	and it isn't particularly useful.
1995-03-24 16:38:06 +00:00
Jim Kingdon
6e131ad8e1 * gdb.base/scope.exp: Make test names unique. \[(\] -> \\(. 1995-03-24 14:13:35 +00:00
Jeff Law
9bfed1ee34 * somsolib.c (som_solib_add): Handle case where a shared library
referenced by a core file has sections without the SEC_ALLOC bit
        set (eg stabs sections).
1995-03-24 06:21:44 +00:00
Jim Kingdon
91e3c24670 * gdb.base/commands.exp (infrun_breakpoint_command_test): New test. 1995-03-23 23:36:33 +00:00
Jim Kingdon
1c04536e70 * breakpoint.c (bpstat_do_actions): For each element in the bpstat
chain, do all the commands regardless of whether they run the
	inferior.
1995-03-23 23:35:00 +00:00
David Edelsohn
aa949c081f * mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as
BREAKPOINT if mono-endian.
	(break_insn): Deleted.
	(big_break_insn, little_break_insn): Define.
	(memory_insert_breakpoint): Handle bi-endian cpus.
	(BREAKPOINT_LEN): Define.
	(memory_remove_breakpoint): Use it.
	(memory_breakpoint_size): Likewise.
1995-03-23 03:39:24 +00:00
Kung Hsu
40ee1402e0 * config/mt-slite: add LIBS and -nostdlib.
* config/slite-gdb.exp: add this new file to support sparclite target.
1995-03-23 02:38:39 +00:00