Gold version of commit 3cd7c7d7ef.
* powerpc.cc (Target_powerpc): Rename power10_stubs_ to
power10_relocs_.
(Target_powerpc::set_power10_relocs): New accessor.
(Target_powerpc::set_power10_stubs): Delete.
(Target_powerpc::power10_stubs): Adjust.
(Target_powerpc::has_localentry0): New accessor.
(ld_0_11): New constant.
(glink_eh_frame_fde_64v1, glink_eh_frame_fde_64v2): Adjust.
(glink_eh_frame_fde_64v2_localentry0): New.
(Output_data_glink::pltresolve_size): Update.
(Output_data_glink::add_eh_frame): Use localentry0 version eh_frame.
(Output_data_glink::do_write): Move r2 save to start of ELFv2 stub
and only emit for has_localentry0. Don't use r2 in the stub.
(Target_powerpc::Scan::local, global): Adjust for
set_power10_relocs renaming.
(Target_powerpc::scan_relocs): Warn and reset plt_localentry0_.
This stub doesn't have the r2 store at the beginning.
* powerpc.cc (Target_powerpc::Relocate::relocate): Don't skip
first insn of __tls_get_addr_opt stub.
ppc64 ld optimises sequences like the following
addis 3,13,wot@tprel@ha
lwz 3,wot@tprel@l(3)
to
nop
lwz 3,wot@tprel(13)
when "wot" is located near enough to the thread pointer.
However, the ABI doesn't require that R_PPC64_TPREL16_HA always be on
an addis rt,13,imm instruction, and while ld checked for that on the
high-part instruction it didn't disable the optimisation on the
low-part instruction. This patch fixes that problem, disabling the
tprel optimisation globally if high-part instructions don't pass
sanity checks. The optimisation is also enabled for ppc32, where
before ld.bfd had the code in the wrong place and ld.gold had it in a
block only enabled for ppc64.
bfd/
* elf32-ppc.c (ppc_elf_check_relocs): Set has_tls_reloc for
high part tprel16 relocs.
(ppc_elf_tls_optimize): Sanity check high part tprel16 relocs.
Clear do_tls_opt on odd instructions.
(ppc_elf_relocate_section): Move TPREL16_HA/LO optimisation later.
Don't sanity check them here.
* elf64-ppc.c (ppc64_elf_check_relocs): Set has_tls_reloc for
high part tprel16 relocs.
(ppc64_elf_tls_optimize): Sanity check high part tprel16 relocs.
Clear do_tls_opt on odd instructions.
(ppc64_elf_relocate_section): Don't sanity check TPREL16_HA.
ld/
* testsuite/ld-powerpc/tls32.d: Update for TPREL_HA/LO optimisation.
* testsuite/ld-powerpc/tlsexe32.d: Likewise.
* testsuite/ld-powerpc/tlsldopt32.d: Likewise.
* testsuite/ld-powerpc/tlsmark32.d: Likewise.
* testsuite/ld-powerpc/tlsopt4_32.d: Likewise.
* testsuite/ld-powerpc/tprel.s,
* testsuite/ld-powerpc/tprel.d,
* testsuite/ld-powerpc/tprel32.d: New tests.
* testsuite/ld-powerpc/tprelbad.s,
* testsuite/ld-powerpc/tprelbad.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run them.
gold/
* powerpc.cc (Target_powerpc): Add tprel_opt_ and accessors.
(Target_powerpc::Scan::local): Sanity check tprel high relocs.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Control tprel optimisation
with tprel_opt_ and enable for 32-bit.
gold version of commit e10a07b32d.
* options.h (DEFINE_enum): Add optional_arg__ param, adjust
all uses.
(General_options): Add --power10-stubs and --no-power10-stubs.
* options.cc (General_options::finalize): Handle --power10-stubs.
* powerpc.cc (set_power10_stubs): Don't set when --power10-stubs=no.
(power10_stubs_auto): New.
(struct Plt_stub_ent): Add toc_ and tocoff_. Don't use a bitfield
for indx_.
(struct Branch_stub_ent): Add toc_and tocoff_. Use bitfields for
iter_, notoc_ and save_res_.
(add_plt_call_entry): Set toc_. Adjust resizing conditions for
--power10-stubs=auto.
(add_long_branch_entry): Set toc_.
(add_eh_frame, define_stub_syms): No longer use const_iterators
for plt and long branch stub iteration.
(build_tls_opt_head, build_tls_opt_tail): Change parameters and
return value. Move tests for __tls_get_addr to callers.
(plt_call_size): Handle --power10-stubs=auto.
(branch_stub_size): Likewise.
(Stub_table::do_write): Likewise.
(relocate): Likewise.
* testsuite/script_test_7.sh: Adjust expected address of the .bss
section.
* testsuite/script_test_9.sh: Do not expect the .init section to
immediately follow the .text section in the mapping of sections to
segments.
At least one C library (uclibc-ng) defines some of these only when
the compiler is GCC. We might as well test for all three cases and
handle any of them being missing.
Very similar code exists in libctf and split between elfcpp and gold:
fix both.
(Also sync up elfcpp with a change made to libctf swap.h a few months
ago: since there is no out-of-line definition of the bswap replacements,
they should be declared static inline, not just inline, to prevent the
linker generating out-of-line references to them.)
PR libctf/25120
libctf/
* configure.ac: Check for bswap_16, bswap_32, and bswap_64 decls.
* swap.h (bswap_16): Do not assume that presence of <byteswap.h>
means this is declared.
(bswap_32): Likewise.
(bswap_64): Likewise.
(bswap_identity_64): Remove, unused.
* configure: Regenerated.
* config.h.in: Likewise.
gold/
* configure.ac: Check for bswap_16, bswap_32, and bswap_64 decls.
* configure: Regenerated.
* config.h.in: Likewise.
elfcpp/
* elfcpp_swap.h (bswap_16): Do not assume that presence of
<byteswap.h> means this is declared. Make static inline, matching
recent change to libctf, since there is no non-inline definition
of these functions.
(bswap_32): Likewise.
(bswap_64): Likewise.
I was playing with passing -std=c99 to an older version of gcc by
using CC="gcc-4 -std=c99", and ran into
cc1plus: error: command line option ‘-std=c99’ is valid for C/ObjC but
not for C++ [-Werror]
This obvious fix uses the correct compiler for a number of gold
testcases.
* testsuite/Makefile.am (export_dynamic_plugin.o): Use CXXCOMPILE.
(plugin_test_wrap_symbols_1.o): Likewise.
(plugin_test_wrap_symbols_2.o): Likewise.
* testsuite/Makefile.in: Regenerate.
These relocations should have had REL in their names, to reflect the
fact that they are pc-relative. Fix that now by adding _PCREL.
I've added some back-compatibility code to support anyone using
.reloc with the old relocations.
include/
* elf/ppc64.h (elf_ppc64_reloc_type): Rename
R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34,
R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34,
R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and
R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34.
bfd/
* reloc.c: Rename
BFD_RELOC_PPC64_GOT_TLSGD34 to BFD_RELOC_PPC64_GOT_TLSGD_PCREL34,
BFD_RELOC_PPC64_GOT_TLSLD34 to BFD_RELOC_PPC64_GOT_TLSLD_PCREL34,
BFD_RELOC_PPC64_GOT_TPREL34 to BFD_RELOC_PPC64_GOT_TPREL_PCREL34,
BFD_RELOC_PPC64_GOT_DTPREL34 to BFD_RELOC_PPC64_GOT_DTPREL_PCREL34.
* elf64-ppc.c: Update throughout for reloc renaming.
(ppc64_elf_reloc_name_lookup): Handle old reloc names.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c: Update throughout for reloc renaming.
elfcpp/
* powerpc.h: Rename
R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34,
R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34,
R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and
R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34.
gold/
* powerpc.cc: Update throughout for reloc renaming.
PR 25882
bfd/
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Don't init FP
attributes from shared libraries, and do not return an error if
they don't match.
gold/
* powerpc.cc (merge_object_attributes): Replace name param with
obj param. Update callers. Don't init FP attributes from shared
libraries, and do not emit an error if they don't match.
sym->object() could be either a Plugin or Powerpc_relobj. There could
be a situation when Pluginobj would be proccessed in
ppc_object->get_opd_ent(dst_off) as Powerpc_relobj and it leads to the
segmentation fault.
* powerpc.cc (do_gc_mark_symbol): Don't segfault on plugin symbols.
Now that ISA3.1 is out we can finish with the powerxx silliness.
bfd/
* elf64-ppc.c: Rename powerxx to power10 throughout.
gas/
* config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10
renaming.
* testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/gas/ppc/prefix-pcrel.d: Likewise.
* testsuite/gas/ppc/prefix-reloc.d: Likewise.
gold/
* powerpc.cc: Rename powerxx to power10 throughout.
include/
* elf/ppc64.h: Update comment.
* opcode/ppc.h (PPC_OPCODE_POWER10): Rename from PPC_OPCODE_POWERXX.
ld/
* testsuite/ld-powerpc/callstub-1.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/ld-powerpc/notoc2.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* testsuite/ld-powerpc/tlsgd.d: Likewise.
* testsuite/ld-powerpc/tlsie.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power10" entry.
(print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming.
* ppc-opc.c (POWER10): Rename from POWERXX. Update all uses.
Since GCC 10 defaults to -fno-common, add -fcommon to common tests to
force common behavior.
PR gold/25904
* testsuite/Makefile.am (COMMON_TEST_C_CFLAGS): New.
(common_test_1.o): New rule.
(common_test_2.o): Likewise.
(common_test_3.o): Likewise.
(plugin_common_test_1.o): Likewise.
(plugin_common_test_2.o): Likewise.
(common_test_1_v1.o): Likewise.
(common_test_1_v2.o): Likewise.
(common_test_2_pic.o): Compile with $(COMMON_TEST_C_CFLAGS).
(common_test_3_pic.o): Likewise.
* testsuite/Makefile.in: Regenerated.
GCC 9 generates the same function size for Ordering::operator() in
odr_violation1.cc and odr_violation2.cc on x32:
134: 00000000 31 FUNC WEAK DEFAULT 64 _ZN8OrderingclEii
40: 00000000 31 FUNC GLOBAL DEFAULT 10 _ZN8OrderingclEii
This patch makes Ordering::operator() even more complex
134: 00000000 31 FUNC WEAK DEFAULT 64 _ZN8OrderingclEii
42: 00000000 35 FUNC GLOBAL DEFAULT 11 _ZN8OrderingclEii
* testsuite/odr_violation2.cc (Ordering::operator()): Make
expression even more complex.
Handle local IFUNC symbol for APLT like global IFUNC symbol.
PR gold/25872
* x86_64.cc (Output_data_plt_x86_64_bnd::do_address_for_local):
Handle local IFUNC symbol.
(Output_data_plt_x86_64_ibt::do_address_for_local): Likewise.
This patch arranges to have OSABI set to ELFOSABI_GNU (if not set to
some other non-zero value) when gold outputs an ifunc local or global
symbol, or a unique global symbol to either .dynsym or .symtab.
STT_GNU_IFUNC and STB_GNU_UNIQUE have values in the LOOS to HIOS range
and therefore require interpretation according to OSABI.
I'm not sure why parameters->target() is const Target& while
parameters->sized_target() is Sized_target*, but it's inconvenient to
use the latter in Symbol_table::finalize. So this patch adds another
const_cast complained about in layout.cc and gold.cc.
PR 24853
* symtab.h (set_has_gnu_output, has_gnu_output_): New.
* symtab.cc (Symbol_table::Symbol_table): Init has_gnu_output_.
(Symbol_table::finalize): Set ELFOSABI_GNU when has_gnu_output_.
(Symbol_table::set_dynsym_indexes, Symbol_table::sized_finalize):
Call set_has_gnu_output for STT_GNU_IFUNC and STB_GNU_UNIQUE globals.
* object.cc (Sized_relobj_file::do_finalize_local_symbols): Call
set_has_gnu_output when STT_GNU_IFUNC locals will be output.
An R_386_GOTOFF relocation has an addend, typically used when a
symbol can be replaced by its section symbol plus an offset.
psymval->value(object,0) is quite wrong then, fix it.
PR 16794
* i386.cc (Target_i386::Relocate::relocate <R_386_GOTOFF>): Don't
ignore addend, apply using pcrel32.
* x86_64.cc (Target_x86_64::Relocate::relocate <R_X86_64_GOTOFF64>):
Similarly use pcrel64.
lto_slim_object_ was unitialized. I also thought it worth adding
a sanity check on the .gnu.lto_.lto.* section size, and made some
other tidies.
PR 24768
* layout.cc (Layout::Layout): Init lto_slim_object_.
* object.cc (Sized_relobj_file::do_layout): Wrap overlong line.
Don't use C cast. Validate section size. Don't copy contents.
This patch corrects the set of dynamic relocations recognised by gold
as supported by glibc, and teaches ld.bfd to report an error similar
to the gold error. Note that ld --noinhibit-exec can be used to
produce an output, supporting older ld with newer glibc if the set of
supported glibc dynamic relocations changes.
bfd/
* elf64-ppc.c (ppc64_glibc_dynamic_reloc): New function.
(ppc64_elf_relocate_section): Error if emitting unsupported
dynamic relocations.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Move REL24
to 32-bit supported.
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
2019-08-16 Martin Liska <mliska@suse.cz>
PR ld/24912
* elflink.c: Report error only for not relocatable.
* linker.c (_bfd_generic_link_add_one_symbol): Do not handle
here lto_slim_object as it's handled in caller.
2019-08-16 Martin Liska <mliska@suse.cz>
PR ld/24912
* object.cc (big_endian>::do_layout): Do not report error,
but only set a flag.
(big_endian>::do_add_symbols): Report error only for when
relocatable.
