skip.c checks whether REG_EXTENDED is defined -- but this should
always be available, and is used unconditionally in other parts of
gdb. This patch removes this check, then further simplifies this
code, removing a declaration and a repeated assertion.
2020-10-02 Tom Tromey <tromey@adacore.com>
* skip.c (skiplist_entry::skiplist_entry): Unconditionally use
REG_EXTENDED.
I just noticed that in a7aba2668a ("gdb: remove arguments from
inferior_created observable"), I forgot to update
aix_thread_inferior_created and procfs_inferior_created, which are in
files I can't compile.
Remove the parameters from aix_thread_inferior_created. And simply
remove procfs_inferior_created, since it's empty anyway.
gdb/ChangeLog:
* aix-thread.c (aix_thread_inferior_created): Remove parameters.
* procfs.c (procfs_inferior_created): Remove.
(_initialize_procfs): Don't register procfs_inferior_created.
Change-Id: Ifc7def7c096332033b5d466d32cb873d1df18c2c
The following patch needs to output debug prints from gdbsupport code.
Move debug_prefixed_vprintf so that it is possible to use it from
gdbsupport.
gdb/ChangeLog:
* debug.c (debug_prefixed_vprintf): Move to gdbsupport.
* debug.h: Remove.
* infrun.c: Include gdbsupport/common-debug.h.
* linux-nat.c: Likewise.
gdbsupport/ChangeLog:
* common-debug.cc (debug_prefixed_vprintf): Move here.
* common-debug.h (debug_prefixed_vprintf): Move here.
Change-Id: I5170065fc10a7a49c0f1bba67c691decb2cf3bcb
Assign names to async event/signal handlers. They will be used in debug
messages when file handlers are invoked.
Unlike in the previous patch, the names are not copied in the structure,
since we don't need to (all names are string literals for the moment).
gdb/ChangeLog:
* async-event.h (create_async_signal_handler): Add name
parameter.
(create_async_event_handler): Likewise.
* async-event.c (struct async_signal_handler) <name>: New field.
(struct async_event_handler) <name>: New field.
(create_async_signal_handler): Assign name.
(create_async_event_handler): Assign name.
* event-top.c (async_init_signals): Pass name when creating
handler.
* infrun.c (_initialize_infrun): Likewise.
* record-btrace.c (record_btrace_push_target): Likewise.
* record-full.c (record_full_open): Likewise.
* remote-notif.c (remote_notif_state_allocate): Likewise.
* remote.c (remote_target::open_1): Likewise.
* tui/tui-win.c (tui_initialize_win): Likewise.
Change-Id: Icd9d9f775542ae5fc2cd148c12f481e7885936d5
Assign names to event loop file handlers. They will be used in debug
messages when file handlers are invoked.
In GDB, each UI used to get its own unique number, until commit
cbe256847e ("Remove ui::num"). Re-introduce this field, and use it to
make a unique name for the handler.
I'm not too sure what goes on in ser-base.c, all I know is that it's
what is used when debugging remotely. I've just named the main handler
"serial". It would be good to have unique names there too. For instance
when debugging with two different remote connections, we'd ideally want
the handlers to have unique names. I didn't do it in this patch though.
gdb/ChangeLog:
* async-event.c (initialize_async_signal_handlers): Pass name to
add_file_handler
* event-top.c (ui_register_input_event_handler): Likewise.
* linux-nat.c (linux_nat_target::async): Likewise.
* run-on-main-thread.c (_initialize_run_on_main_thread):
Likewise
* ser-base.c (reschedule): Likewise.
(ser_base_async): Likewise.
* tui/tui-io.c: Likewise.
* top.h (struct ui) <num>: New field.
* top.c (highest_ui_num): New variable.
(ui::ui): Initialize num.
gdbserver/ChangeLog:
* linux-low.cc (linux_process_target::async): Pass name to
add_file_handler.
* remote-utils.cc (handle_accept_event): Likewise.
(remote_open): Likewise.
gdbsupport/ChangeLog:
* event-loop.h (add_file_handler): Add "name" parameter.
* event-loop.cc (struct file_handler) <name>: New field.
(create_file_handler): Add "name" parameter, assign it to file
handler.
(add_file_handler): Add "name" parameter.
Change-Id: I9f1545f73888ebb6778eb653a618ca44d105f92c
I noticed that non of the listeners of the inferior_created observable
used either of the arguments. Remove them. This in turn allows
removing the target parameter of post_create_inferior.
Tested only by rebuilding.
gdb/ChangeLog:
* observable.h <inferior_created>: Remove parameters. Update all
listeners.
* inferior.h (post_create_inferior): Remove target parameter.
Update all callers.
Change-Id: I8944cefdc4447ed5347dc927b75abf1e7a0e27e6
PR 26681
bfd * elflink.c (bfd_elf_gc_sections): Do not arbitrarily keep note
sections which are linked to another section.
ld * testsuite/ld-elf/pr26681.s: New test.
* testsuite/ld-elf/pr26681.d: New test driver.
* testsuite/ld-elf/pr26681.l: New test output.
GDB complaints "During symbol reading: unrecognized DW_MACFINO
opcode 0xb" with the testcase given below. Clang is emitting
DW_MACRO_define_strx and DW_MACRO_undef_strx entries in .debug_macro
section which are not supported in GDB. This patch handles them.
DW_MACRO_define_strx and DW_MACRO_undef_strx are added in DWARFv5.
They have two operands. The first operand encodes the line number of
the #define or #undef macro directive. The second operand identifies
a string; it is represented using an unsigned LEB128 encoded value,
which is interpreted as a zero-based index into an array of offsets
in the .debug_str_offsets section. This is as per the section 6.3.2.1
of Dwarf Debugging Information Format Version 5.
Test case used:
#define MAX_SIZE 10
int main(void)
{
int size = 0;
size = size + MAX_SIZE;
printf("\n The value of size is [%d]\n",size);
return 0;
}
clang -gdwarf-5 -fdebug-macro macro.c -o macro.out
Before the patch:
gdb/new_gdb/binutils-gdb/build/bin/gdb -q macro.out -ex "set complaints 1" -ex "start"
Reading symbols from macro.out...
During symbol reading: unrecognized DW_MACFINO opcode 0xb
Temporary breakpoint 1 at 0x4004df: file macro.c, line 7.
Starting program: /home/nitika/workspace/macro.out
Temporary breakpoint 1, main () at macro.c:7
7 int size = 0;
(gdb)
Tested by running the testsuite before and after the patch with
-gdwarf-5 and there is no increase in the number of test cases
that fails. Used clang 11.0.0.
gdb/ChangeLog:
* dwarf2/macro.c (dwarf_decode_macro_bytes): Handle DW_MACRO_define_strx
and DW_MACRO_undef_strx.
(dwarf_decode_macros): Likewise
* dwarf2/read.c (dwarf_decode_macros): Pass str_offsets_base in the parameters
which is the value of DW_AT_str_offsets_base.
* dwarf2/macro.h (dwarf_decode_macros): Modify the definition to include
str_offsets_base.
Remove old, no longer needed and no longer valid extern.
../../gdb/i386-nbsd-tdep.c:58:12: error: 'i386nbsd_sc_reg_offset' was declared 'extern' and later 'static' [-fpermissive]
58 | static int i386nbsd_sc_reg_offset[] =
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from ../../gdb/i386-nbsd-tdep.c:31:
../../gdb/i386-tdep.h:480:12: note: previous declaration of 'i386nbsd_sc_reg_offset'
480 | extern int i386nbsd_sc_reg_offset[];
| ^~~~~~~~~~~~~~~~~~~~~~
gdb/ChangeLog:
* i386-tdep.h (i386nbsd_sc_reg_offset): Remove.
NetBSD switched to ucontext, back in 2003 and the sigcontext code
is no longer available for users, except for legacy compat layers.
This code was not available anyway as the pre-processor check
was probably never operational and buildable on NetBSD. The code
inside it does not compile.
Meanwhile, move the offset variable into the ifdef goards and avoid
the error about unused variable.
../../gdb/i386-bsd-nat.c: In function 'void _initialize_i386bsd_nat()':
../../gdb/i386-bsd-nat.c:347:7: error: unused variable 'offset' [-Werror=unused-variable]
347 | int offset;
| ^~~~~~
cc1plus: all warnings being treated as errors
gdb/ChangeLog:
* i386-bsd-nat.c (_initialize_i386bsd_nat): Update.
* i386-nbsd-tdep.c (i386nbsd_sc_reg_offset): Now static.
The support is on part with NetBSD/amd64, thus GPR works,
single step and software breakpoint are operational, and the
SVR4 r_debug integration is functional.
gdbserver/ChangeLog:
* netbsd-i386-low.cc: Add.
* Makefile.in (SFILES): Register "netbsd-i386-low.c".
* configure.srv: Add i[34567]86-*-netbsd*.
Replace the pre-C++ construct of netbsd_target_ops, netbsd_regset_info
and netbsd_tdesc with C++ inheritance approach found in the Linux
gdbserver code. Add netbsd_amd64_target, that inherits from the
netbsd_process_target class and add proper singleton object for
the_netbsd_target, initialized from netbsd_amd64_target.
Call low_arch_setup () on post process creation, which sets machine
specific properties of the traced process.
Remove global singleton the_netbsd_target object from the generic
gdbserver code.
This refactoring introduces no functional change from the end-user
point of view.
gdbserver/ChangeLog:
* netbsd-amd64-low.cc (netbsd_x86_64_arch_setup): Remove.
(netbsd_target_regsets): Now const.
(the_low_target): Remove.
(class netbsd_amd64_target, the_netbsd_amd64_target)
(the_netbsd_target): Add.
* netbsd-low.cc (netbsd_process_target::post_create_inferior): Call
low_arch_setup ().
(netbsd_process_target::fetch_registers)
(netbsd_process_target::store_registers, initialize_low): Update.
(the_netbsd_target): Remove.
* netbsd-low.h (netbsd_target_regsets, netbsd_target_ops)
(the_low_target, netbsd_tdesc): Remove.
(netbsd_process_target::get_regs_info)
(netbsd_process_target::low_arch_setup): Add.
Don't pass random sun_len for the BSD's,
zero the whole structure as recommended for portability.
Reported by Coverity.
gdbsupport/ChangeLog:
* agent.cc (gdb_connect_sync_socket): Preinitialize addr with zeros.
In file included from ../../gdb/i386-nbsd-nat.c:26:
../../gdb/i386-bsd-nat.h:34:53: error: expected template-name before '<' token
34 | class i386_bsd_nat_target : public x86bsd_nat_target<BaseTarget>
| ^
../../gdb/i386-bsd-nat.h:34:53: error: expected '{' before '<' token
../../gdb/i386-nbsd-nat.c:74:45: error: aggregate 'i386_bsd_nat_target<nbsd_nat_target> the_i386_nbsd_nat_target' has incomplete type and cannot be defined
74 | static i386_bsd_nat_target<nbsd_nat_target> the_i386_nbsd_nat_target;
| ^~~~~~~~~~~~~~~~~~~~~~~~
gdb/ChangeLog:
* i386-bsd-nat.c: Include "x86-bsd-nat.h".
* config/obj-elf (elf_pseudo_table): Add attach_to_group.
(obj_elf_attach_to_group): New function.
* doc/as.texi: Document the new directive.
* NEWS: Mention the new feature.
* testsuite/gas/elf/attach-1.s: New test.
* testsuite/gas/elf/attach-1.d: New test driver.
* testsuite/gas/elf/attach-2.s: New test.
* testsuite/gas/elf/attach-2.d: New test driver.
* testsuite/gas/elf/attach-err.s: New test.
* testsuite/gas/elf/attach-err.d: New test driver.
* testsuite/gas/elf/attach-err.err: New test error output.
* testsuite/gas/elf/elf.exp: Run the new tests.
If the address prefix changes the register operand, we need to check the
register operand when the memory operand is RIP-relative.
PR gas/26685
* config/tc-i386.c (process_suffix): Check the register operand
for the address size prefix if the memory operand is symbol(%rip).
* testsuite/gas/i386/x86-64-enqcmd.s: Add tests with RIP-relative
addressing.
* testsuite/gas/i386/x86-64-movdir.s: Likewise.
* testsuite/gas/i386/x86-64-enqcmd-intel.d: Updated.
* testsuite/gas/i386/x86-64-enqcmd.d: Likewise.
* testsuite/gas/i386/x86-64-movdir-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movdir.d: Likewise.
Since commit 2c830f5475 "Change some uses of DW_STRING to string method" we
have these regressions:
...
FAIL: gdb.base/info-types-c++.exp: info types
FAIL: gdb.cp/anon-struct.exp: print type of t::t
FAIL: gdb.cp/anon-struct.exp: print type of X::t2
FAIL: gdb.cp/anon-struct.exp: print type of X::t2::t2
FAIL: gdb.cp/anon-struct.exp: print type of t3::~t3
...
Fix these in dwarf2_name by updating attr_name each time attr is updated.
Tested on x86_64-linux.
gdb/ChangeLog:
2020-09-30 Tom de Vries <tdevries@suse.de>
PR symtab/26683
* dwarf2/read.c (dwarf2_name): Update attr_name after attr is updated.
My series to change DWARF attribute handling to be type-safe
introduced a regression in gdb.ada/variant.exp. handle_variant was
using as_unsigned on an attribute with DW_FORM_sdata. This patch
changes it to use constant_value instead.
2020-09-30 Tom Tromey <tromey@adacore.com>
* dwarf2/read.c (handle_variant): Use constant_value.
For non-ELF targets, override the IR definition before all LTO symbols
have been read.
PR ld/26675
* plugin.c (plugin_notice): Override the IR definition before
all LTO symbols have been read for non-ELF targets.
This patch adds support for Arm's Neoverse N2 CPU to AArch64 binutils.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_cpus): Add neoverse-n2.
* doc/c-aarch64.texi: Document support for Neoverse N2.
gdb.dwarf2/dw2-double-set-die-type.exp failed to build with Clang,
because of the following issues:
- One .uleb128 directive was specified with an uppercase U,
causing Clang to fail with the message:
error: unknown directive
This commit converts that directive to all-lowercase.
- The label ".Labbrev1_begin" was referenced but not defined,
causing Clang to fail with the message:
<unknown>:0: error: Undefined temporary symbol
This commit adds the label in the appropriate place.
- The label ".Ldebug_line0" was referenced but not defined,
causing Clang to fail with the message:
<unknown>:0: error: Undefined temporary symbol
This commit removes the reference.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-double-set-die-type.S (.Ldie_3e0):
Convert directive to lowercase.
(.Labbrev1_begin): Add missing label.
(abbrev code 0x1): Remove DW_AT_stmt_list.
(.Ldie_b): Likewise.
This removes DW_UNSND, replacing uses with either as_unsigned or
constant_value, depending primarily on whether or not the form is
already known to be appropriate.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (lookup_dwo_id, get_type_unit_group)
(read_file_scope, dwarf2_get_pc_bounds)
(dwarf2_record_block_ranges, dwarf2_add_field, get_alignment)
(read_structure_type, handle_struct_member_die)
(read_enumeration_type, read_array_type, read_set_type)
(read_tag_pointer_type, read_tag_reference_type)
(read_subroutine_type, read_base_type, read_subrange_type)
(read_full_die_1, partial_die_info::read)
(partial_die_info::read, by, new_symbol)
(dwarf2_const_value_data, dwarf2_const_value_attr)
(dump_die_shallow, dwarf2_fetch_constant_bytes)
(prepare_one_comp_unit): Update.
* dwarf2/attribute.h (DW_UNSND): Remove.
This adds a new attribute::as_boolean method, and updates the reader
to use it. The main benefit of this change is that now the code will
respect the attribute's form.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_func_scope, prototyped_function_p)
(read_subroutine_type, partial_die_info::read)
(dwarf2_flag_true_p, new_symbol, dump_die_shallow)
(dwarf2_add_member_fn): Update.
* dwarf2/attribute.h (struct attribute) <as_boolean>: Declare.
* dwarf2/attribute.c (attribute::as_boolean): New method.
This adds a new attribute::as_virtuality method and changes the DWARF
reader to use it. This also ensures that the attibute's form will now
be respected.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf2_add_field, dwarf2_add_member_fn): Update.
* dwarf2/attribute.h (struct attribute) <as_virtuality>: New
method.
* dwarf2/attribute.c (attribute::as_virtuality): New method.
This changes two die_info methods to check the form of the attribute
before using it.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/die.h (struct die_info) <addr_base, ranges_base>: Check
the attribute's form.
This changes is_valid_DW_AT_defaulted to be a method on struct attribute.
Now it correctly respects the form of the attribute.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (is_valid_DW_AT_defaulted): Move to attribute.c.
(dwarf2_add_member_fn): Update.
* dwarf2/attribute.h (struct attribute) <defaulted>: Declare.
* dwarf2/attribute.c (attribute::defaulted): New method, from
is_valid_DW_AT_defaulted.
This introduces a new attribute::as_unsigned method and changes a few
spots to use it.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dw2_get_file_names_reader)
(dwarf2_build_include_psymtabs, handle_DW_AT_stmt_list)
(dwarf2_cu::setup_type_unit_groups, fill_in_loclist_baton)
(dwarf2_symbol_mark_computed): Use as_unsigned.
* dwarf2/attribute.h (struct attribute) <as_unsigned>: New
method.
<form_is_section_offset>: Update comment.
dwarf2/read.c uses dwarf2_default_access_attribute to check for the
default access attribute. This patch simplifies the code by moving
more of the access processing into this function, changing its name to
reflect the difference. This also ensures that the attribute's form
is respected, by changing to code to use the constant_value method.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf2_access_attribute): Rename from
dwarf2_default_access_attribute. Look up attribute.
(dwarf2_add_field, dwarf2_add_type_defn, dwarf2_add_member_fn):
Update.
Currently gdb keeps a vector of attributes that require reprocessing.
However, now that there is a reprocessing flag in the attribute, we
can remove the vector and instead simply loop over attributes a second
time. Normally there are not many attributes, so this should be
reasonably cheap.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (skip_one_die): Update.
(read_full_die_1): Change how reprocessing is done.
(partial_die_info::read): Update.
(read_attribute_value): Remove need_reprocess parameter.
(read_attribute): Likewise.
* dwarf2/attribute.h (struct attribute) <requires_reprocessing_p>:
New method.
Some forms require "reprocessing" -- a second pass to update their
value appropriately. In this case, we'll set the unsigned value on
the attribute, and then later set it to the correct value.
To handle this, we introduce a reprocessing flag to attribute. Then,
we manage this flag to ensure that setting and unsetting is done
properly.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_cutu_die_from_dwo): Use OBSTACK_ZALLOC.
(read_attribute_reprocess, read_attribute_value): Update.
(read_attribute): Clear requires_reprocessing.
* dwarf2/attribute.h (struct attribute) <as_unsigned_reprocess,
form_requires_reprocessing>: New methods.
<string_init>: Clear requires_reprocessing.
<set_unsigned_reprocess>: New method.
<name>: Shrink by one bit.
<requires_reprocessing>: New member.
* dwarf2/attribute.c (attribute::form_requires_reprocessing): New
method.
This adds form_is_unsigned and an unsigned setter method to struct
attribute, and updates the remaining code. Now DW_UNSND is no longer
used as an lvalue.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_attribute_value): Update.
* dwarf2/attribute.h (struct attribute) <form_is_unsigned,
set_unsigned>: New methods.
* dwarf2/attribute.c (attribute::form_is_unsigned): New method.
This removes DW_SND in favor of accessors on struct attribute.
These accessors check that the form is appropriate.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (get_alignment, read_array_order)
(read_attribute_value, dwarf2_const_value_attr)
(dump_die_shallow, dwarf2_fetch_constant_bytes): Update.
* dwarf2/attribute.h (struct attribute) <as_signed, set_signed>:
New methods.
(DW_SND): Remove.
This removes DW_SIGNATURE in favor of methods on struct attribute. As
usual, the methods check the form, which DW_SIGNATURE did not do.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_attribute_value, lookup_die_type)
(dump_die_shallow, follow_die_sig, get_DW_AT_signature_type):
Update.
* dwarf2/attribute.h (struct attribute) <as_signature,
set_signature>: New methods.
(DW_SIGNATURE): Remove.
This removes the DW_BLOCK accessor in favor of methods on struct
attribute. The methods, unlike the access, check the form.
Note that DW_FORM_data16 had to be handled by form_is_block, because
in practice that is how we store values of this form.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_call_site_scope)
(handle_data_member_location, dwarf2_add_member_fn)
(mark_common_block_symbol_computed, attr_to_dynamic_prop)
(partial_die_info::read, read_attribute_value)
(var_decode_location, dwarf2_const_value_attr, dump_die_shallow)
(dwarf2_fetch_die_loc_sect_off, dwarf2_fetch_constant_bytes)
(dwarf2_symbol_mark_computed): Update.
* dwarf2/attribute.h (struct attribute) <as_block, set_block>: New
methods.
(DW_BLOCK): Remove.
* dwarf2/attribute.c (attribute::form_is_block): Add
DW_FORM_data16.
This removes DW_STRING and DW_STRING_IS_CANONICAL, replacing them with
accessor methods on struct attribute. The new code ensures that a
string value will only ever be used when the form allows it.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (read_cutu_die_from_dwo)
(read_attribute_reprocess, read_attribute_value, read_attribute)
(dwarf2_const_value_attr, dwarf2_name, dump_die_shallow)
(dwarf2_fetch_constant_bytes): Update.
* dwarf2/attribute.h (struct attribute) <form_is_string>: Declare.
<set_string_noncanonical, set_string_canonical>: New methods.
<string_is_canonical>: Update comment.
<canonical_string_p>: Add assert.
(DW_STRING, DW_STRING_IS_CANONICAL): Remove.
* dwarf2/attribute.c (attribute::form_is_string): New method.
(attribute::string): Use it.
This removes the rvalue uses of DW_STRING_IS_CANONICAL, replacing them
with an accessor method.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (anonymous_struct_prefix, dwarf2_name)
(dump_die_shallow): Use canonical_string_p.
* dwarf2/attribute.h (struct attribute) <canonical_string_p>: New
method.
This changes some of the simpler spots to use attribute::string rather
than DW_STRING.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (partial_die_info::read)
(dwarf2_const_value_attr, anonymous_struct_prefix, )
(dwarf2_name, dwarf2_fetch_constant_bytes): Use
attribute::as_string.
There's no need to use the DW_* accessor macros in dwarf2/attribute.c,
and this is a necessary step toward our goal of removing them
entirely.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/attribute.c (attribute::address): Don't use DW_UNSND or
DW_ADDR.
(attribute::string): Don't use DW_STRING.
(attribute::get_ref_die_offset): Don't use DW_UNSND.
(attribute::constant_value): Don't use DW_UNSND or DW_SND.
This removes the "value_" prefix from the struct value accessors.
This seemed unnecessarily wordy to me.
gdb/ChangeLog
2020-09-29 Tom Tromey <tom@tromey.com>
* dwarf2/read.c (dwarf2_find_base_address, read_call_site_scope)
(dwarf2_get_pc_bounds, dwarf2_record_block_ranges)
(partial_die_info::read, dwarf2_string_attr, new_symbol): Update.
* dwarf2/attribute.h (struct attribute): Rename methods.
* dwarf2/attribute.c (attribute::as_address): Rename from
value_as_address.
(attribute::as_string): Rename from value_as_string.
