Commit Graph

8454 Commits

Author SHA1 Message Date
J.T. Conklin
d4b2399a9c * target.h (target_memory_bfd_section): Removed declaration.
* target.c (target_memory_bfd_section): Removed.
* exec.c (xfer_memory): Removed #if'ed-out code which referenced
target_memory_bfd_section.

* target.h (target_read_memory_section): Removed declaration.
* target.c (target_read_memory_section): Removed.
(target_xfer_memory): Update, removed bfd_section argument.
(target_read_string, target_read_memory, target_write_memory):
Update for above change.

* gdbcore.h (read_memory_section): Removed declaration.
* corefile.c (read_memory_section): Removed.
* jv-lang.c (get_java_utf8_name): Changed calls to
read_memory_section to read_memory.
* printcmd.c (printf_command): Likewise.
* valops.c (value_at, value_fetch_lazy): Likewise.
2000-05-20 10:29:51 +00:00
Jimmy Guo
4ab64e140e update 2000-05-19 19:19:34 +00:00
Jimmy Guo
d387afa3a7 regenerate 2000-05-19 19:14:45 +00:00
J.T. Conklin
e42180d7b4 * configure.host, configure.tgt (powerpc-*-netbsd*): New entry.
* config/powerpc/nbsd.mh, config/powerpc/nbsd.mt,
config/powerpc/tm-nbsd.h, config/powerpc/nm-nbsd.h,
config/powerpc/xm-nbsd.h: New files.
2000-05-18 23:43:58 +00:00
Michael Snyder
1a570b2f5f 2000-05-12 Michael Snyder <msnyder@.cygnus.com>
* gdb.base/break.exp (bp on small function, optimized file):
        Add a second pass pattern.  The behavior differs here between stabs
        and dwarf for one-line functions.  Stabs preserves two line symbols
        (one before the prologue and one after) with the same line number,
        but dwarf regards these as duplicates and discards one of them.
        Therefore the address after the prologue (where the breakpoint is)
        has no exactly matching line symbol, and GDB reports the breakpoint
        as if it were in the middle of a line rather than at the beginning.
2000-05-17 17:10:19 +00:00
Michael Snyder
aca52a9bcc 2000-05-12 Michael Snyder <msnyder@.cygnus.com>
* config/i386/tm-i386sol2.h (COERCE_FLOAT_TO_DOUBLE): Define.
2000-05-17 17:09:27 +00:00
Eli Zaretskii
74b2d06784 * gdb/config/djgpp/README: Fine-tune installation instructions
based on user reports.
2000-05-17 11:49:53 +00:00
Eli Zaretskii
d3229ae3bd * mmalloc/Makefile.in (install-info): Make sure $(infodir) exists.
Run install-info program on the installed Info files.
	* gdb/doc/Makefile.in (install-info): Run install-info on installed
	Info files.
2000-05-17 11:45:56 +00:00
Andrew Cagney
d80380145f Minor maint et.al. tweeks. 2000-05-17 08:46:20 +00:00
Andrew Cagney
e2bdc01eaa Change v850 break-point instruction to loop. Get around lack of 16
bit breakpoint.
2000-05-17 06:51:28 +00:00
Andrew Cagney
7ae383524c Review TODO. 2000-05-16 09:00:20 +00:00
Andrew Cagney
10adc9b50e Rename mi/ChangeLog-mi -> mi/ChangeLog 2000-05-16 05:07:53 +00:00
Andrew Cagney
e2f9c47491 Make free_current_contents more robust. Use in MI. 2000-05-16 04:57:49 +00:00
Andrew Cagney
56e290f494 Cleanup discard_minimal_symbols cleanup. 2000-05-16 04:07:39 +00:00
Andrew Cagney
1ed2a1352d Fix signature of add_set_enum_cmd. Change VAR parameter to char**.
Cleanup signature of add_set_cmd.  Change VAR parameter to void*.
2000-05-16 03:03:13 +00:00
Andrew Cagney
dfb0df6c34 Remove stray extern declaration of wrap_value_subscript(). 2000-05-16 02:50:23 +00:00
Andrew Cagney
5c65bbb629 Cleanup bfd_close() cleanups. 2000-05-16 02:43:39 +00:00
Andrew Cagney
2a00c9ceff Add notes on register cache. 2000-05-15 23:10:56 +00:00
Joern Rennecke
63978407cb sh-dsp support, simulator speedup by using host byte order:
sim:
	* Makefile.in (interp.o): Depends on ppi.c .
	(ppi.c): New rule.
	* gencode.c (printonmatch, think, genopc): Deleted.
	(MAX_NR_STUFF): Now 42.
	(tab): Add SH-DSP CPU instructions.
	Amalgamate ldc / stc / lds / sts instructions with similar
	bit patterns.  Fix opcodes of stc Rm_BANK,@-<REG_N>.
	Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
	(movsxy_tab): New array.
	For movs, change MMMM field to GGGG, and mmmm field to MMMM.
	Added entries for movx, movy and parallel processing insns.
	(ppi_tab): New array.
	(qfunc): Stabilize sort.
	(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
	Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
	(dumptable): Now takes three arguments.  Changed all callers.
	Emit just one contigous jump table.
	(filltable): Now takes an argument.  Changed all callers.
	Make index static.
	(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
	(gensim_caselist): New function, broken out of gensim.
	Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
	Handle ref '9'.
	(gensim): Handle 'N' in code field and '8' in refs field.
	Call gensim_caselist - twice.
	(ppi_index): New static variable.
	(main): Unsupport default action.
	Add dsp support for -x / -s option.  Add -p option.
	* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
	(saved_state_type): Rearrange to allow amalgamated ldc / stc /
	lds / sts to work efficiently.
	(target_dsp): New static variable.
	(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
	(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
	(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
	(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
	(set_fpscr1): Likewise.  Use target_dsp to check for dsp.
	(MOD_MSi, SIG_BUS_FETCH): Deleted.
	(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
	(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
	(SET_MOD): Reflect saved_state_type change.  Set MOD_DELTA instead
	of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
	(set_sr): Reflect saved_state_type change.  Fix SR_RB handling.
	Use SET_MOD.
	(MA, L, TL, TB): Now controlled by ACE_FAST.
	(SEXT32): Just cast to int.
	(SIGN32): Fixed to only shift by 31.
	(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
	(ppi_insn): Declare.
	(ppi.c): Include.
	(init_dsp): Set target_dsp.  When it changes, switch end of
	sh_jump_table with sh_dsp_table.
	(sim_resume) Don't declare sh_jump_table0.  Use sh_jump_table instead.
	Don't Declare PR if it's #defined.
	Fix single-stepping (Was broken in Mar  6 16:59:10 patch).
	(sim_store_register, sim_read_register): Translate accesses to
	reflect saved_state_type change.

	* interp.c (set_sr): Set sr.
	(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
	(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
	(DSP_R): Fix definition.
	(sim_resume): Remove outdated SET_SR use.

	* interp.c (saved_state): New members for struct member asregs:
	rs, re, insn_end, xram_start, yram_start.
	(struct loop_bounds): New struct.
	(SKIP_INSN): New macro.
	(get_loop_bounds): New function.
	(endianw): Renamed to global_endianw.
	(maskw): negated bits.
	(PC): Now insn_ptr.
	(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
	(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
	(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
	(SIG_BUS_FETCH): Likewise
	(raise_exception, riat_fast): New functions.
	(raise_buserror, sim_stop): Use raise_exception.
	(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
	(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
	Reverse sense of mask argument.
	(FP_OP, set_dr): Use RAISE_EXCEPTION.
	(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
	Declare.  Remove redundant masking.
	(wwat_fast, rwat_fast): Add argument endianw.  Changed callers.
	(MA): Updated for change pc -> PC.
	(Delay_Slot): Use RIAT.
	(empty): Deleted.
	(trap): Remove argument little_endian.  Add argument endianw.
	Changed all callers.  Use raise_exception.
	(macw): Add argument endainw.  Changed all callers.
	(init_dsp): New function, extended after broken out of init_pointers.
	(sim_resume): Replace pc with insn_ptr.  Replace little_endian with
	endianw.  Replace nia with nip.  Reverse sense of maskb / maskw /
	maskl.  Implement logic for zero-overhead loops.  Don't try to
	interpret garbage when getting a SIGBUS at insn fetch.
	(sim_open): Call init_dsp.
	* gencode.c (tab): Use SET_NIP instead of nia = .  Use PH2T / PT2H /
	RAISE_EXCEPTION where appropriate.
	Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.

	* interp.c (sim_store_register, sim_fetch_register):
	Do proper endianness switch.

	* interp.c (saved_state_type): New members for struct member asregs:
	xymem_select, xmem, ymem, xmem_offset, ymem_offset.
	(special_address): Delete.
	(BUSERROR): Now a two-argument predicate.
	(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
	(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
	(process_wlat_addr, process_wwat_addr): New functions.
	(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
	(process_rbat_addr): Likewise.
	(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
	(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
	(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
	(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
	(do_rdat, trap): Delete SLOW code.
	(SEXT32, SIGN32): New macros.
	(swap, swap16): Now integer in - integer out.  Changed all callers.
	(strswaplen, strnswap): Delete SLOW versions.
	(init_pointers): Initialize dsp memory selection (preliminary).
	(sim_store_register, sim_fetch_register): Use swap instead of
	big / little endian read / write functions.

	* interp.c (maskl): Deleted.
	(endianw, endianb): New variables.
	(special_address): Now inline.
	(bp_holder): Put raising of buserror there, rename to:
	(raise_buserror).
	(BUSERROR): Now yields a value.  Changed all users.
	(wbat_big): Delete.
	(wlat_fast, wwat_fast, wbat_fast): New functions.
	(rlat_fast, rwat_fast, rbat_fast): Likewise.
	(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
	(do_rdat, do_wdat): Likewise.  Take maskl argument instead of
	little_endian one.  Changed caller macros.
	(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
	(strswaplen, strnswap): New functions.
	(trap): Use them to fix up endian mismatches;
	disable SYS_execve and SYS_execv; fix double address translation for
	SYS_pipe and SYS_stat.
	(sym_write, sym_read): Add endianness translation.
	(sym_store_register, sym_fetch_register): Add maskl local variable.
	(sim_open): Set endianw and endianb.

gdb:

	* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
	(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
	 bfd_mach_sh3_dsp.
	(sh_show_regs): Floating point registers are called fr0-fr15.
	For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
	Handle sh-dsp and sh3-dsp.
	config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
	don't have floating point registers.
	(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
	(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
	(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
2000-05-15 21:12:42 +00:00
Andrew Cagney
47cf603ed4 Cleanup cleanups - delete use of make_cleanup_func as cast. 2000-05-15 11:48:50 +00:00
Eli Zaretskii
4f0aafb38a * Makefile.in (gdbtypes.o, varobj.o): Depend on wrapper.h.
* wrapper.h (gdb_value_subscript, wrap_value_subscript): Add
	prototypes.
2000-05-15 07:10:04 +00:00
Andrew Cagney
d1e3cf4998 Convert SAVE_DUMMY_FRAME_TOS to multi-arch. 2000-05-15 06:27:18 +00:00
Andrew Cagney
f23d52e0a5 Cleanup free_agent_expr cleanups. 2000-05-15 06:15:27 +00:00
Andrew Cagney
4d6140d95e Cleanup delete_breakpoint cleanups. 2000-05-15 05:54:02 +00:00
Andrew Cagney
3339cf8b68 Move core_addr_lessthan and core_addr_greaterthan to arch-utils. 2000-05-15 03:56:30 +00:00
Andrew Cagney
b02eeafb14 Use make_cleanup_ui_out_stream_delete(). 2000-05-15 03:16:15 +00:00
Andrew Cagney
5bfb05ca59 Fix IRIX cc warnings. Fix ui_out functions that didn't return a value. 2000-05-15 01:44:40 +00:00
Kevin Buettner
8216cda9b4 For IA-64, allow ``finish'' to land on caller rather than on next executable
line after the caller.
2000-05-13 01:38:05 +00:00
Kevin Buettner
bf9198f149 Fix typo in sign extension code in dwarf2_const_value_data(). 2000-05-13 00:51:35 +00:00
Andrew Cagney
3fffcb5ea7 Mention UnixWare thread problem. 2000-05-12 10:50:50 +00:00
Andrew Cagney
6bc37a9656 Doc weak symbol problem. 2000-05-12 10:42:02 +00:00
Andrew Cagney
a7cb598ae6 Add Stan to authors attempt two. Also add et.al. 2000-05-12 10:30:32 +00:00
Andrew Cagney
8c70017bcc Add Andrew Cagney. Add Stan Shebs as an author. 2000-05-12 10:23:54 +00:00
Andrew Cagney
6736fc7be9 Update section on kernel debugging. 2000-05-12 10:15:16 +00:00
Andrew Cagney
47a8d4ba5d Handle case of 32 ABI saving 32 bit registers on stack when target
has 64 bit ISA.
2000-05-12 09:21:30 +00:00
Andrew Cagney
216a600b17 Fix tipo 32->64 in MIPS_EABI. 2000-05-12 04:51:22 +00:00
Andrew Cagney
746a987d82 Check -W options before using them. 2000-05-12 04:37:00 +00:00
Elena Zannoni
2ec466f950 2000-05-11 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* coffread.c (coff_symtab_read): In the case of C_THUMBEXT |
 	C_THUMBEXTFUNC | C_EXT, sec will never ever be the index for
 	.rodata, because cs_to_section doesn't deal with .rodata. Fix test
 	accordingly.
2000-05-11 20:39:58 +00:00
Andrew Cagney
381323f4f8 Only try to print a macro when it is defined (in gdbarch_dump). 2000-05-11 11:49:21 +00:00
Andrew Cagney
aba7b4b6d0 Update README file to 5.0. 2000-05-11 07:55:25 +00:00
Andrew Cagney
0dadbba0df Add preliminary support for IRIX's n32 abi to the MIPS's multi-arch code. 2000-05-11 03:40:08 +00:00
Elena Zannoni
9e12421610 2000-05-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* solib.c (symbol_add_stub): Remember the index and the name of
        the section with the lowest address. Use this data (instead of
        data from .text) to pass info into symbol_file_add.

        * elfread.c (record_minimal_symbol_and_info): Use the section
        where the symbol lives to get the index, instead of guessing.
2000-05-11 00:36:17 +00:00
Michael Snyder
5af923b0f0 2000-05-10 Michael Snyder <msnyder@seadog.cygnus.com>
Make Sparc a Multi-Arch target.  Discard PARAMS macro (require ANSI).
	* sparc-tdep.c: include arch-utils.h.
	(SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
	DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
	(GDB_TARGET_IS_SPARC64): make into a runtime test.
	(struct frame_extra_info): Define, use instead of the macro.
	(Many places): Use alloca instead of statically allocated buffers
	that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
	(sparc_extract_struct_value_address): Accept a pointer arg instead
	of an array sized by REGISTER_BYTES.
	(examine_prologue): Accept a pointer to an array of CORE_ADDR,
	instead of the defunct struct frame_saved_regs.  Recognize new
	Sparc64 store instructions as part of the prologue.  Ignore the
	destination of a frame store when parsing the prologue (so long
	as it's on the stack).
	(sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
	(sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
	instead of the defunct struct frame_saved_regs.
	(supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
	supply_register.  Provide 4-byte offset to compensate for diff
	between size of the prgreg_t elements on a 64-bit host and size
	of the registers for a 32-bit target.  Fill all inaccessible regs
	with zero so they won't keep being requested again and again.
	(fill_gregset): Handle 32/64 size difference between registers
	and prgreg_t.  Handle as many new 64-bit regs as possible.
	(supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
	(sparc_push_arguments): Rename to sparc32_push_arguments.
	Copy arguments into registers as well as onto stack, so that the
	CALL_DUMMY (code pushed onto the target stack) is not required.
	(sparc_extract_return_value): Rename to sparc32_extract_return_value.
	(sparc_store_return_value): Use memset instead of bzero.
	Use write_register_gen instead of write_register_bytes.
	(sparclet_store_return_value): New function.
	(_initialize_sparc_tdep): Call register_gdbarch_init to activate
	the gdbarch multi-architecture system.
	(sp64_push_arguments): Rename to sparc64_push_arguments.
	Extend to store arguments in general registers as well as on stack.
	(sparc64_extract_return_value): Rename to sp64_extract_return_value.
	Use as a private function, to be called by the new external function
	sparc64_extract_return_value.
	(sparclet_extract_return_value): New function.
	(sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
	sparc64_register_name, sparc_print_extra_frame_info,
	sparclite_register_name, sparclet_register_name,
	sparc_push_return_address, sparc64_use_struct_convention,
	sparc32_store_struct_return, sparc64_store_struct_return,
	sparc32_register_virtual_type, sparc64_register_virtual_type,
	sparc32_register_size, sparc64_register_size,
	sparc32_register_byte, sparc64_register_byte,
	sparc_gdbarch_skip_prologue, sparc_convert_to_virtual,
	sparc_convert_to_raw, sparc_frame_init_saved_regs,
	sparc_frame_address, sparc_gdbarch_fix_call_dummy,
	sparc_coerce_float_to_double, sparc_call_dummy_address,
	sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
	sparc_return_value_on_stack): New functions supporting multi-arch.
	(sparc_gdbarch_init): New function; initialize multi-arch.
	(struct gdbarch_tdep): Define, use for private multi-arch data.
	* config/sparc/tm-sparc.h: Move definitions around, enclose with
	#ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
	definitions.  Add enums for register names, to help debugging gdb.
	This header file must work for non-multi-arch and for multi-arch.
	* config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration.  Also add
	AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
	Define GDB_MULTI_ARCH.
	* config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
	Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
	* config/sparc/tm-sparclite.h: Ditto.
	* config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
	* sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
	avoid using deprecated REGISTER_NAMES macro.
	* Makefile.in: Let sparc-tdep.c depend on arch-utils.h.
2000-05-10 20:07:25 +00:00
Michael Snyder
6005439332 2000-05-08 Michael Snyder <msnyder@seadog.cygnus.com>
* gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
        * gdbarch.c, gdbarch.h: Regenerate.
        * core-regset.c: Change FP0_REGNUM to a runtime test.
        * procfs.c: Ditto.
        * sun3-nat.c: Ditto.
        * sparc-tdep.c: Ditto.

        * i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
        * ptx4-nat.c: Ditto.

        * sol-thread.c (sol_thread_create_inferior): only add the thread
        to the thread list if it is not already in there.
        (prototypes for thread_db func ptrs): pretty up formatting.
2000-05-10 17:38:16 +00:00
Eli Zaretskii
598ca718d0 * gdb.texinfo: Proofreading changes from Brian Youmans. 2000-05-09 08:24:34 +00:00
Michael Snyder
e245aa6b05 2000-05-08 Michael Snyder <msnyder@seadog.cygnus.com>
* sol-thread.c (sol_thread_create_inferior): only add the thread
        to the thread list if it is not already in there.
        (prototypes for thread_db func ptrs): pretty up formatting.
2000-05-08 22:34:38 +00:00
Michael Snyder
89cb06a200 2000-05-08 Michael Snyder <msnyder@seadog.cygnus.com>
* gdb.base/interrupt.exp: Make "pass" message say "send"
        rather than "send_gdb" (for consistancy).
2000-05-08 22:18:05 +00:00
Eli Zaretskii
ed0a91a5fa * djunpack.bat: Change the Sed script to replace @V@ in fnchange.lst
with the version name.

	* config/djgpp/djconfig.sh: Use more warning switches.

	* config/djgpp/fnchange.lst: Replace the leading gdb-0222 with the
        @V@ placebo.
2000-05-08 15:06:27 +00:00
Andrew Cagney
d929b26ff1 Move some of the MIPS n32 ABI configuration options into the mips
multi-arch vector.
2000-05-08 02:53:04 +00:00
Andrew Cagney
327fce13c5 * procfs.c (PROCFS_TRACE): Delete definition.
* proc-utils.h (PROCFS_NOTE, PROC_PRETTYFPRINT_STATUS): Always define.
2000-05-07 23:09:45 +00:00